-- ***************************************************************** -- QTECH-MPLSOAM-MIB.mib: Qtech MPLSOAM MIB file -- -- $Copyright$ -- -- ***************************************************************** -- QTECH-MPLSOAM-MIB DEFINITIONS ::= BEGIN IMPORTS qtechMgmt FROM QTECH-SMI IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue, TimeStamp, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.5.12.7 -- January 04, 2011 at 13:27 GMT -- 1.3.6.1.4.1.2011.5.12.7 qtechMplsOam MODULE-IDENTITY LAST-UPDATED "201101041327Z" -- January 04, 2011 at 13:27 GMT ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "Copyright (C) Qtech Networks. This MIB module contains managed object definitions for the Operation, Administration and Maintenance (OAM) as in [Y.1711]. The MPLS OAM is Operation Administration and Maintenance mechanism for MPLS network." ::= { qtechMgmt 93 } -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.12.7.1 -- 1.3.6.1.4.1.2011.5.12.7.1 qtechMplsOamPs OBJECT IDENTIFIER ::= { qtechMplsOam 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1 qtechMplsOamObjects OBJECT IDENTIFIER ::= { qtechMplsOamPs 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1.1 qtechMplsOamCapability OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Whether OAM is enabled globally. 1: enable; 0: disable; The default value is disabled globally." ::= { qtechMplsOamObjects 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3 -- 1.3.6.1.4.1.2011.5.12.7.1.1.2 qtechMplsOamIgrTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechMplsOamIgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LSP(or te tunnel)." ::= { qtechMplsOamObjects 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1 qtechMplsOamIgrEntry OBJECT-TYPE SYNTAX QtechMplsOamIgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information for configuring and monitoring LSP(or te tunnel). It is indexed by qtechMplsOamIgrIndex, which uniquely identifies a single LSP(or te tunnel)." INDEX { qtechMplsOamIgrIndex } ::= { qtechMplsOamIgrTable 1 } QtechMplsOamIgrEntry ::= SEQUENCE { qtechMplsOamIgrIndex Unsigned32, qtechMplsOamIgrLspName OCTET STRING, qtechMplsOamIgrLspId Integer32, qtechMplsOamIgrDetType INTEGER, qtechMplsOamIgrDetFreq INTEGER, qtechMplsOamIgrRevType INTEGER, qtechMplsOamIgrRevLspName OCTET STRING, qtechMplsOamIgrEnable INTEGER, qtechMplsOamIgrValid Integer32, qtechMplsOamIgrAvaState Integer32, qtechMplsOamIgrDefectType Integer32, qtechMplsOamIgrRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 qtechMplsOamIgrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a unique index in the ingress table." ::= { qtechMplsOamIgrEntry 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 qtechMplsOamIgrLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of an LSP(or te tunnel)." ::= { qtechMplsOamIgrEntry 2 } qtechMplsOamIgrLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The ID of an LSP." ::= { qtechMplsOamIgrEntry 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 qtechMplsOamIgrDetType OBJECT-TYPE SYNTAX INTEGER { cv(1), ffd(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The OAM defect detection function is based on the periodic transmission of CV or FFD packets from ingress to egress of an LSP. Each CV and FFD packet carries a unique TTSI (Trail Termination Source Identifier), which is composed of the source LSR identifier, and the LSP identifier. 1: CV; 2: FFD." ::= { qtechMplsOamIgrEntry 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 qtechMplsOamIgrDetFreq OBJECT-TYPE SYNTAX INTEGER { cv1000ms(0), ffd50ms2(1), ffd100ms3(2), ffd200ms4(3), ffd500ms5(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1s(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms." ::= { qtechMplsOamIgrEntry 5 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 qtechMplsOamIgrRevType OBJECT-TYPE SYNTAX INTEGER { private(1), share(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at the downstream LSP's LSR sink point.BDI and loopback transactions use a return path. A return path could be: 1: A dedicated return LSP; 2: A shared return LSP, which is shared between many forward LSPs." ::= { qtechMplsOamIgrEntry 6 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 qtechMplsOamIgrRevLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a return LSP." ::= { qtechMplsOamIgrEntry 7 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 qtechMplsOamIgrEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The detection of OAM is enabled/disabled on the ingress of an LSP. 0: The OAM detection is disabled on the ingress; 1: The OAM detection is enabled on the ingress." ::= { qtechMplsOamIgrEntry 8 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 qtechMplsOamIgrValid OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "0: stop detection of OAM; 1: start detection of OAM." ::= { qtechMplsOamIgrEntry 9 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.16 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 qtechMplsOamIgrAvaState OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "If the LSP Timer (T3) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after first exiting the LSP defect state. 0: available state; 1: unavailable state." ::= { qtechMplsOamIgrEntry 10 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.17 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 qtechMplsOamIgrDefectType OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer maintenance entity defect: 0: no defect; 1: dServer, Any server layer defect arising below the MPLS layer network; 2: dPeerMe, Any peer maintenance entity defect arising outside the MPLS subnetwork; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Excess rate of CV/FFD defect; 7: dUnknown, Unknown defect in the MPLS network." ::= { qtechMplsOamIgrEntry 11 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.18 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 qtechMplsOamIgrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to create and delete a row in this table." ::= { qtechMplsOamIgrEntry 12 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3 qtechMplsOamEgrTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechMplsOamEgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LSP(or te tunnel)." ::= { qtechMplsOamObjects 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1 qtechMplsOamEgrEntry OBJECT-TYPE SYNTAX QtechMplsOamEgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information for configuring and monitoring LSP(or te tunnel). It is indexed by qtechMplsOamEgrIndex, which uniquely identifies a single LSP(or te tunnel)." INDEX { qtechMplsOamEgrIndex } ::= { qtechMplsOamEgrTable 1 } QtechMplsOamEgrEntry ::= SEQUENCE { qtechMplsOamEgrIndex Unsigned32, qtechMplsOamEgrLspName OCTET STRING, qtechMplsOamEgrLsrId IpAddress, qtechMplsOamEgrLspId Integer32, qtechMplsOamEgrDetType INTEGER, qtechMplsOamEgrDetFreq INTEGER, qtechMplsOamEgrRevType INTEGER, qtechMplsOamEgrRevLspName OCTET STRING, qtechMplsOamEgrAutoEn INTEGER, qtechMplsOamEgrAutoOvertime Integer32, qtechMplsOamEgrBDIFreq INTEGER, qtechMplsOamEgrEnable INTEGER, qtechMplsOamEgrValid INTEGER, qtechMplsOamEgrAvaState Integer32, qtechMplsOamEgrDefectType Integer32, qtechMplsOamEgrRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.1 qtechMplsOamEgrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a unique index in the egress table." ::= { qtechMplsOamEgrEntry 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2 qtechMplsOamEgrLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of static LSP at egress." ::= { qtechMplsOamEgrEntry 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3 qtechMplsOamEgrLsrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Ingress LSR ID of an LSP." ::= { qtechMplsOamEgrEntry 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4 qtechMplsOamEgrLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The ID of an LSP." ::= { qtechMplsOamEgrEntry 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.5 qtechMplsOamEgrDetType OBJECT-TYPE SYNTAX INTEGER { adaptability(0), cv(1), ffd(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "0: adaptability; 1: CV; 2: FFD." ::= { qtechMplsOamEgrEntry 5 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.6 qtechMplsOamEgrDetFreq OBJECT-TYPE SYNTAX INTEGER{ cv1000ms(0), ffd50ms2(1), ffd100ms3(2), ffd200ms4(3), ffd500ms5(4), invalid6(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "0: 1000ms(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms; 5: invalid." ::= { qtechMplsOamEgrEntry 6 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.7 qtechMplsOamEgrRevType OBJECT-TYPE SYNTAX INTEGER { private(0), share(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at the downstream LSP's LSR sink point.BDI and loopback transactions use a return path. A return path could be: 1: A dedicated return LSP; 2: A shared return LSP, which is shared between many forward LSPs." ::= { qtechMplsOamEgrEntry 7 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.8 -- qtechMplsOamEgrRevTunnName OBJECT-TYPE qtechMplsOamEgrRevLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a return LSP." ::= { qtechMplsOamEgrEntry 8 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.9 qtechMplsOamEgrAutoEn OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptability is enabled/disabled. 0: disable; 1: enable." ::= { qtechMplsOamEgrEntry 9 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.10 qtechMplsOamEgrAutoOvertime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The wait-time of adaptability." ::= { qtechMplsOamEgrEntry 10 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.11 qtechMplsOamEgrBDIFreq OBJECT-TYPE SYNTAX INTEGER { cv1000ms(0), ffd50ms2(1), ffd100ms3(2), ffd200ms4(3), ffd500ms5(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1000ms(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms." ::= { qtechMplsOamEgrEntry 11 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.12 qtechMplsOamEgrEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The detection of OAM is enabled/disabled on the egress of an LSP. 0: The OAM detection is disabled on the egress; 1: The OAM detection is enabled on the egress." ::= { qtechMplsOamEgrEntry 12 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.13 qtechMplsOamEgrValid OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "1: stop detection of OAM; 2: start detection of OAM." ::= { qtechMplsOamEgrEntry 13 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.14 qtechMplsOamEgrAvaState OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect State. first exists. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state 0: available state; 1: unavailable state." ::= { qtechMplsOamEgrEntry 14 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.15 qtechMplsOamEgrDefectType OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer maintenance entity defect: 0: no defect; 1: dServer, Any server layer defect arising below the MPLS layer network; 2: dPeerMe, Any peer maintenance entity defect arising outside the MPLS subnetwork; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Excess rate of CV/FFD defect; 7: dUnknown, Unknown defect in the MPLS network." ::= { qtechMplsOamEgrEntry 15 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.16 qtechMplsOamEgrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to create and delete a row in this table." ::= { qtechMplsOamEgrEntry 16 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.5 qtechMplsOamTrapOpen OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "0: disable 1: enable" ::= { qtechMplsOamObjects 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.3 -- 1.3.6.1.4.1.2011.5.12.7.1.2 qtechMplsOamNotifications OBJECT IDENTIFIER ::= { qtechMplsOamPs 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.1 -- 1.3.6.1.4.1.2011.5.12.7.1.2.1 qtechMplsOamIgrLSPOutDefect NOTIFICATION-TYPE OBJECTS { qtechMplsOamIgrIndex, qtechMplsOamIgrLspName, qtechMplsOamIgrAvaState, qtechMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP exits defect state at the LSP ingress." ::= { qtechMplsOamNotifications 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.2 -- 1.3.6.1.4.1.2011.5.12.7.1.2.2 qtechMplsOamIgrLSPInDefect NOTIFICATION-TYPE OBJECTS { qtechMplsOamIgrIndex, qtechMplsOamIgrLspName, qtechMplsOamIgrAvaState, qtechMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters defect state at the LSP ingress." ::= { qtechMplsOamNotifications 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.3 -- 1.3.6.1.4.1.2011.5.12.7.1.2.3 qtechMplsOamIgrLSPAva NOTIFICATION-TYPE OBJECTS { qtechMplsOamIgrIndex, qtechMplsOamIgrLspName, qtechMplsOamIgrAvaState, qtechMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters available state at the LSP ingress." ::= { qtechMplsOamNotifications 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.4 -- 1.3.6.1.4.1.2011.5.12.7.1.2.4 qtechMplsOamIgrLSPUnAva NOTIFICATION-TYPE OBJECTS { qtechMplsOamIgrIndex, qtechMplsOamIgrLspName, qtechMplsOamIgrAvaState, qtechMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters unavailable state at the LSP ingress." ::= { qtechMplsOamNotifications 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.5 qtechMplsOamEgrLSPOutDefect NOTIFICATION-TYPE OBJECTS { qtechMplsOamEgrIndex, qtechMplsOamEgrLspName, qtechMplsOamEgrLsrId, qtechMplsOamEgrLspId, qtechMplsOamEgrAvaState, qtechMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP exits defect state at the LSP egress." ::= { qtechMplsOamNotifications 5 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.6 qtechMplsOamEgrLSPInDefect NOTIFICATION-TYPE OBJECTS { qtechMplsOamEgrIndex, qtechMplsOamEgrLspName, qtechMplsOamEgrLsrId, qtechMplsOamEgrLspId, qtechMplsOamEgrAvaState, qtechMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters defect state at the LSP egress." ::= { qtechMplsOamNotifications 6 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.7 qtechMplsOamEgrLSPAva NOTIFICATION-TYPE OBJECTS { qtechMplsOamEgrIndex, qtechMplsOamEgrLspName, qtechMplsOamEgrLsrId, qtechMplsOamEgrLspId, qtechMplsOamEgrAvaState, qtechMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters available state at the LSP egress." ::= { qtechMplsOamNotifications 7 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.8 qtechMplsOamEgrLSPUnAva NOTIFICATION-TYPE OBJECTS { qtechMplsOamEgrIndex, qtechMplsOamEgrLspName, qtechMplsOamEgrLsrId, qtechMplsOamEgrLspId, qtechMplsOamEgrAvaState, qtechMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters unavailable state at the LSP egress." ::= { qtechMplsOamNotifications 8 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.9 qtechMplsOamEgrFirstPkt NOTIFICATION-TYPE OBJECTS { qtechMplsOamEgrIndex, qtechMplsOamEgrLspName, qtechMplsOamEgrLsrId, qtechMplsOamEgrLspId, qtechMplsOamEgrDetType, qtechMplsOamEgrDetFreq } STATUS current DESCRIPTION "If adaptability is enabled, this notification is generated when the LSP egress receives the first CV/FFD packet." ::= { qtechMplsOamNotifications 9 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.10 qtechMplsOamEgrAutoProFDI NOTIFICATION-TYPE OBJECTS { qtechMplsOamEgrIndex, qtechMplsOamEgrLspName, qtechMplsOamEgrLsrId, qtechMplsOamEgrLspId, qtechMplsOamEgrEnable } STATUS current DESCRIPTION "The FDI is sent downstream from the upstream node in an LSP to inform the downstream end of an LSP of a upstream defect. It is also generated when the adaptability is enabled." ::= { qtechMplsOamNotifications 10 } qtechMplsPsObjects OBJECT IDENTIFIER ::= { qtechMplsOamPs 3 } qtechMplsPsTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechMplsPsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LSP protection group(or te tunnel protection group)." ::= { qtechMplsPsObjects 1 } qtechMplsPsEntry OBJECT-TYPE SYNTAX QtechMplsPsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information for configuring and monitoring LSP protection group(or te tunnel protection group). It is indexed by qtechMplsPsIndex, which uniquely identifies a single LSP protection group(or te tunnel protection group)." INDEX { qtechMplsPsIndex } ::= { qtechMplsPsTable 1 } QtechMplsPsEntry ::= SEQUENCE { qtechMplsPsIndex Unsigned32, qtechMplsPsGroupName OCTET STRING, qtechMplsPsType Integer32, qtechMplsPsWorkLspName OCTET STRING, qtechMplsPsWorkLspId Integer32, qtechMplsPsProtectLspName OCTET STRING, qtechMplsPsProtectLspId Integer32, qtechMplsPsRevertiveMode Integer32, qtechMplsPsWTR Integer32, qtechMplsPsHoldOff Integer32, qtechMplsPsSwitchCondition Integer32, qtechMplsPsWorkLspState Integer32, qtechMplsPsProtLspState Integer32, qtechMplsPsSwitchResult Integer32, qtechMplsPsRowStatus RowStatus } qtechMplsPsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a unique index in the protection group table." ::= { qtechMplsPsEntry 1 } qtechMplsPsGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The protection group name." ::= { qtechMplsPsEntry 2 } qtechMplsPsType OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type, or a packet 1+1 type. 1. In the 1+1 architecture type, a protection LSP is dedicated to each working LSP with the working LSP bridged onto the protection LSP at the source of the protection domain. 2. In the 1:1 architecture type, a protection LSP is dedicated to each working LSP. 3. In the shared mesh architecture type, possible sharing of protection capacity between disjoint link, node, or SRG failures in the network is achieved while guaranteeing recovery from a single failure. For each link in the network, it keeps track of all the working paths whose traffic will be switched onto it after a given failure. By keeping track of this, it only needs to reserve the maximum of the protection capacity required to protect a single failure in the network. 4. In the packet 1+1 architecture type, the traffic is transmitted simultaneously onto two possibly disjoint routed LSPs to the sink of the protection domain. Each pair of duplicate transmitted packets is assigned the same identifier(sequence number) but distinct from the other pairs of duplicate packets. At the sink of the protection domain, packet level selection mechanism is employed to select one of the two possibly received copies of each packet. The following list provides principles for MPLS protection architectures and mechanisms development. 1: 1:1 protection switching; 2: 1+1 protection switching; 3: shared mesh protection swiching; 4: packet 1+1 protection switching." ::= { qtechMplsPsEntry 3 } qtechMplsPsWorkLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of work-lsp(or work-tunnel)." ::= { qtechMplsPsEntry 4 } qtechMplsPsWorkLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of work-lsp(or work-tunnel)." ::= { qtechMplsPsEntry 5 } qtechMplsPsProtectLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of protect-lsp." ::= { qtechMplsPsEntry 6 } qtechMplsPsProtectLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of protect-lsp(or protect-tunnel)." ::= { qtechMplsPsEntry 7 } qtechMplsPsRevertiveMode OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The protection group revertive mode can be non-revertive and revertive protection switching. 1. In revertive mode of operation, under conditions where working traffic is being transmitted via the protection LSP and when the working LSP is restored, if local protection switching requests have been previously active and now become inactive, a local wait to restore state is entered. 2. When the failed LSP is no longer in an SF condition, and no other externally initiated commands are present, a no request state is entered. During this state, switching does not occur. 1: revertive; 2: non-revertive." ::= { qtechMplsPsEntry 8 } qtechMplsPsWTR OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "Wait to restore is only applicable for the revertive mode and applies to a working LSP. It prevents reversion back to select the working LSP until the wait to restore timer has expired. The wait to restore time may be configured by the operator in 1 minute steps between 1 and 30 minutes; the default value is 12 minutes." ::= { qtechMplsPsEntry 9 } qtechMplsPsHoldOff OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "In general, if lower layer(e.g., SDH or optical) protection mechanisms are being utilized in conjunction with MPLS layer protection mechanisms, then the lower layers should have a chance to restore working traffic before the MPLS layer initiates protection actions(e.g., using a hold-off timer). The objective here is to avoid duplicated protection switching in different layer networks. The default value is 0ms; the maximum value is 10s." ::= { qtechMplsPsEntry 10 } qtechMplsPsSwitchCondition OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-only STATUS current DESCRIPTION "The following switch initiation criteria exist: 1. an externally initiated command(clear, lockout of protection, forced switch, manual switch); 2. an automatically initiated command(signal fail) associated with a protection domain; or 3. a state (wait to restore, no request) of the protection switching function. The followings are switch request priority: 1. clear: This command clears all of the externally initiated switch commands listed below. 2. lockout of protection(LoP): Fix the selector position on the working LSP. Prevents the selector from switching to the protection LSP when it is selecting the working LSP. Switches the selector from the protection to the working LSP when it is selecting the protection LSP. 3. forced switch(FS) for working LSP: Switches the selector from the working LSP to the protection LSP (unless a higher priority switch request(i.e., LoP) is in effect). 4. signal fail: Signal fail(SF) is declared when the source of the protection domain enters the LSP defect state by receiving a BDI packet from the return LSP or out of band. 5. manual switch(MS): Switches the selector from the working LSP to the protection LSP (unless an equal or higher priority switch request (i.e., LoP, FS, SF or MS) is in effect). Switches the selector from the protection LSP to the working LSP (unless an equal or higher priority switch request(i.e., LoP, FS, SF or MS) is in effect). 6. WTR: Wait to restore is only applicable for the revertive mode and applies to a working LSP. 7. no request." ::= { qtechMplsPsEntry 11 } qtechMplsPsWorkLspState OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The state of working lsp state lists below: 1: defect state; 2: non-defect state." ::= { qtechMplsPsEntry 12 } qtechMplsPsProtLspState OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The state of protection lsp state lists below: 1: defect state; 2: non-defect state." ::= { qtechMplsPsEntry 13 } qtechMplsPsSwitchResult OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Which lsp is user traffic being transmitted: 1: working-lsp; 2: protection-lsp." ::= { qtechMplsPsEntry 14 } qtechMplsPsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It is used to create and delete a row in this table. 1: active; 2: notInService; 3: notReady; 4: createAndGo; 5: createAndWait; 6: destroy." ::= { qtechMplsPsEntry 15 } qtechMplsPsTrapOpen OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "1:enable; 2:disable." ::= { qtechMplsPsObjects 2 } qtechMplsPsNotifications OBJECT IDENTIFIER ::= { qtechMplsOamPs 4 } qtechMplsPsSwitchPtoW NOTIFICATION-TYPE OBJECTS { qtechMplsPsWorkLspName, qtechMplsPsWorkLspId, qtechMplsPsProtectLspName, qtechMplsPsProtectLspId, qtechMplsPsSwitchResult } STATUS current DESCRIPTION "This notification is generated when switching traffic from protection-lsp to working-lsp." ::= { qtechMplsPsNotifications 1 } qtechMplsPsSwitchWtoP NOTIFICATION-TYPE OBJECTS { qtechMplsPsWorkLspName, qtechMplsPsWorkLspId, qtechMplsPsProtectLspName, qtechMplsPsProtectLspId, qtechMplsPsSwitchResult } STATUS current DESCRIPTION "This notification is generated when switching traffic from woking-lsp to protection-lsp." ::= { qtechMplsPsNotifications 2 } qtechMplsOamPsConformance OBJECT IDENTIFIER ::= { qtechMplsOamPs 5 } qtechMplsOamPsCompliances OBJECT IDENTIFIER ::= { qtechMplsOamPsConformance 1 } qtechMplsOamPsGroupCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for mpls oam protection group." MODULE -- this module MANDATORY-GROUPS { qtechMplsPsGroup } ::= { qtechMplsOamPsCompliances 1 } qtechMplsOamPsGroups OBJECT IDENTIFIER ::= { qtechMplsOamPsConformance 2 } qtechMplsPsGroup OBJECT-GROUP OBJECTS { qtechMplsPsGroupName, qtechMplsPsType, qtechMplsPsWorkLspName, qtechMplsPsWorkLspId, qtechMplsPsProtectLspName, qtechMplsPsProtectLspId, qtechMplsPsRevertiveMode, qtechMplsPsWTR, qtechMplsPsHoldOff, qtechMplsPsSwitchCondition, qtechMplsPsWorkLspState, qtechMplsPsProtLspState, qtechMplsPsSwitchResult, qtechMplsPsRowStatus, qtechMplsPsIndex } STATUS current DESCRIPTION "The compliance statement for mpls oam protection group management." ::= { qtechMplsOamPsGroups 1 } qtechMplsPsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { qtechMplsPsSwitchPtoW, qtechMplsPsSwitchWtoP } STATUS current DESCRIPTION "Description." ::= { qtechMplsOamPsGroups 2 } END -- -- QTECH-MPLSOAM-MIB.mib --