-- -- SO-TC-MIB.mib -- Smartoptics Enterprise Specific TC MIB -- -- Copyright (c) 2022, Smartoptics -- All rights reserved -- SO-TC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC smartoptics FROM SO-MIB; soTcMIB MODULE-IDENTITY LAST-UPDATED "202203181349Z" ORGANIZATION "Smartoptics" CONTACT-INFO "http://www.smartoptics.com" DESCRIPTION "This is the enterprise specific TC MIB for Smartoptics containing common textual conventions." REVISION "202203181349Z" DESCRIPTION "Added InterfacePortMode." REVISION "202104121049Z" DESCRIPTION "Added DcpTenth, DcpHundreds, OchPortMode textual convention. Updated description for InterfaceStatus." REVISION "201810081444Z" DESCRIPTION "The initial revision" ::= { smartoptics 3 } -- Textual conventions -- -- definitions of the textual convetions -- OpticalPower1Decimal ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-1" STATUS current DESCRIPTION "Power level at an interface in units of 0.1 dBm." SYNTAX Integer32 DcpTenths ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-1" STATUS current DESCRIPTION "An integer to be displayed with 1 decimal place. 100 is displayes as 10.0" SYNTAX Integer32 DcpHundreds ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-2" STATUS current DESCRIPTION "An integer to be displayed with 2 decimal place. 100 is displayes as 1.0" SYNTAX Integer32 InterfaceStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The operational state for a port, interface or optical channel. idle - The port, interface or optical channel is not activated. down - The port, interface or optical channel traffic is lost. up - There is traffic on the port, interface or optical channel." SYNTAX INTEGER { idle (1), down (2), up (3) } ItuPerceivedSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ITU perceived severity values" SYNTAX INTEGER { cleared (1), indeterminate (2), critical (3), major (4), minor (5), warning (6) } OchPortMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The operational state for a port, interface or optical channel. on - The channel is enabled. off - The channel is disabled. edfa - The channel is enabled and connected to the edfa port. express - The channel is enabled and connected to the express port." SYNTAX INTEGER { on (1), off (2), edfa (3), express (4) } InterfacePortMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The interface port mode for a service. na - Not applicable. localAD - The service is added on to the local Mux/Demux port. xc1 - The service is added on a crossconnect port XC1. xc2 - The service is added on a crossconnect port XC2. xc3 - The service is added on a crossconnect port XC3." SYNTAX INTEGER { na (1), localAD (2), xc1 (3), xc2 (4), xc3 (5) } END -- -- SO-TC-MIB.mib --