-- ***************************************************************** -- QTECH-AP-MIB.mib: Qtech AP MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-AP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI PortList FROM Q-BRIDGE-MIB DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- ConfigStatus, MemberMap, IfIndex FROM QTECH-TC qtechMgmt FROM QTECH-SMI; qtechApMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech aggregate port(AP) mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 7} qtechApMIBObjects OBJECT IDENTIFIER ::= { qtechApMIB 1 } qtechApMaxNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MAX aggregate ports this system supported." ::= { qtechApMIBObjects 1 } qtechApCurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current aggregate ports this system have." ::= { qtechApMIBObjects 2 } qtechApPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechApPortConfigEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "aggregate port table." ::= { qtechApMIBObjects 3 } qtechApPortConfigEntry OBJECT-TYPE SYNTAX QtechApPortConfigEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "list of aggregate port and it's port group table." INDEX { qtechApPortConfigPortIndex } ::= { qtechApPortConfigTable 1 } QtechApPortConfigEntry ::= SEQUENCE { qtechApPortConfigPortIndex IfIndex, qtechApPortConfigApIndex IfIndex } qtechApPortConfigPortIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION " " ::= { qtechApPortConfigEntry 1 } qtechApPortConfigApIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Set this value to 1 กซ qtechApMaxNumber indicate that add this value to that aggregate port which this aggregate port must be valid. It separates this port from aggregate port to set this value to 0 " ::= { qtechApPortConfigEntry 2 } qtechApTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechApEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Aggregate ports table." ::= { qtechApMIBObjects 4 } qtechApEntry OBJECT-TYPE SYNTAX QtechApEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "list of aggregate ports and it's distribution table." INDEX { qtechApIndex } ::= { qtechApTable 1 } QtechApEntry ::= SEQUENCE { qtechApIndex IfIndex, qtechApMemberAction MemberMap, qtechApPossibleMember MemberMap, qtechApMaxPtNumber Integer32 -- qtechApEntryStatus ConfigStatus } qtechApIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Aggregate ports index." ::= { qtechApEntry 1 } qtechApMemberAction OBJECT-TYPE SYNTAX MemberMap MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicates the port is not in the aggregate port. this object can be modified only when the status of this entry is invalid." ::= { qtechApEntry 2 } qtechApPossibleMember OBJECT-TYPE SYNTAX MemberMap MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect can be set in the aggregate port. and 0 indicates the port is not possible be set in the aggregate port." ::= { qtechApEntry 3 } qtechApMaxPtNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Max number of ports this aggregate port can include." ::= { qtechApEntry 4 } --qtechApEntryStatus OBJECT-TYPE -- SYNTAX ConfigStatus -- MAX-ACCESS read-create -- STATUS obsolete -- DESCRIPTION -- "Status of this entry, set this object to valid will create a aggregate port, -- and set its value to invalid will delete the aggregate port of this entry." -- ::= { qtechApEntry 5 } qtechApFlowBalance OBJECT-TYPE SYNTAX INTEGER { unknown(0), source-mac(1), destination-mac(2), src-dest-mac(3), source-ip(4), destination-ip(5), src-dest-ip(6), src-dest-port(7), src-dst-ip-l4port(8), enhanced-profile(9), src-l4port(10), dest-l4port(11), src-dest-l4port(12), src-ip-l4port(13), dest-ip-l4port(14), src-ip-dest-l4port(15), dest-ip-src-l4port(16), src-dest-ip-src-l4port(17), src-dest-ip-dest-l4port(18), src-ip-src-dest-l4port(19), dest-ip-src-dest-l4port(20) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the AP traffic balancing algorithm.You can choose enhanced-profile after create a Enhanced mode profile" ::= { qtechApMIBObjects 5 } -- qtechApConfigTable from the 10.3(5) was started to support. qtechApConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregate ports table." ::= { qtechApMIBObjects 6 } qtechApConfigEntry OBJECT-TYPE SYNTAX QtechApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of aggregate ports and it's distribution table." INDEX { qtechApConfigNumber } ::= { qtechApConfigTable 1 } QtechApConfigEntry ::= SEQUENCE { qtechApConfigNumber Integer32, qtechApConfigIndex IfIndex, qtechApConfigMaxPtNumber Integer32, qtechApConfigCurrentPtNumber Integer32, qtechApConfigPortMember PortList, qtechApConfigAction Integer32 } qtechApConfigNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregate ports number.Set this value to 1 กซ qtechApMaxNumber." ::= { qtechApConfigEntry 1 } qtechApConfigIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate ports index." ::= { qtechApConfigEntry 2 } qtechApConfigMaxPtNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MAX aggregate ports this system supported." ::= { qtechApConfigEntry 3 } qtechApConfigCurrentPtNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current ports this aggregate port have." ::= { qtechApConfigEntry 4 } qtechApConfigPortMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicates the port is not in the aggregate port. this object can be modified only when the status of this entry is invalid." ::= { qtechApConfigEntry 5 } qtechApConfigAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value 1 to add an aggregate port, 0 to delete an aggregate port." ::= { qtechApConfigEntry 6 } -- qtechApPortMemberTable from the 10.3(5) was started to support. qtechApPortMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechApPortMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregate port table." ::= { qtechApMIBObjects 7 } qtechApPortMemberEntry OBJECT-TYPE SYNTAX QtechApPortMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of aggregate port and it's port group table." INDEX { qtechApPortMemberPortIndex } ::= { qtechApPortMemberTable 1 } QtechApPortMemberEntry ::= SEQUENCE { qtechApPortMemberPortIndex IfIndex, qtechApPortMemberApNumber Integer32, qtechApPortMemberAction Integer32 } qtechApPortMemberPortIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION " a switch port index. " ::= { qtechApPortMemberEntry 1 } qtechApPortMemberApNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set this value to 1 กซ qtechApMaxNumber indicate that add this value to that aggregate port." ::= { qtechApPortMemberEntry 2 } qtechApPortMemberAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value 1 indcate add to an aggregate port, 0 to delete from an aggregate port." ::= { qtechApPortMemberEntry 3 } -- qtechApBalcProfName from the 10.4(3b17) was started to support. qtechApBalcProfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enhanced mode profile name." ::= { qtechApMIBObjects 8 } -- qtechApProfTable from the 10.4(3b17) was started to support. qtechApProfTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechApProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the enhanced mode profile." ::= { qtechApMIBObjects 9 } qtechApProfEntry OBJECT-TYPE SYNTAX QtechApProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enhanced mode profile configuration entry." INDEX { qtechApProfIdx } ::= { qtechApProfTable 1 } QtechApProfEntry ::= SEQUENCE { qtechApProfIdx Integer32, qtechApProfName DisplayString, -- L2 field qtechApProfL2SrcMac TruthValue, qtechApProfL2DestMac TruthValue, qtechApProfL2Pro TruthValue, qtechApProfL2Vlan TruthValue, qtechApProfL2SrcPort TruthValue, -- Ipv4 field qtechApProfIpv4SrcIp TruthValue, qtechApProfIpv4DestIp TruthValue, qtechApProfIpv4Pro TruthValue, qtechApProfIpv4L4SrcPort TruthValue, qtechApProfIpv4L4DestPort TruthValue, qtechApProfIpv4Vlan TruthValue, qtechApProfIpv4SrcPort TruthValue, -- Ipv6 field qtechApProfIpv6SrcIp TruthValue, qtechApProfIpv6DestIp TruthValue, qtechApProfIpv6Pro TruthValue, qtechApProfIpv6L4SrcPort TruthValue, qtechApProfIpv6L4DestPort TruthValue, qtechApProfIpv6Vlan TruthValue, qtechApProfIpv6SrcPort TruthValue, -- mpls field qtechApProfMplsTopLabel TruthValue, qtechApProfMpls2ndLabel TruthValue, qtechApProfMplsSrcIp TruthValue, qtechApProfMplsDestIp TruthValue, qtechApProfMplsVlan TruthValue, qtechApProfMplsSrcPort TruthValue } qtechApProfIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Enhanced mode profile index." ::= { qtechApProfEntry 1 } qtechApProfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Enhanced mode profile name." ::= { qtechApProfEntry 2 } -- L2 field qtechApProfL2SrcMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source MAC address of incoming layer2 packet." ::= { qtechApProfEntry 3 } qtechApProfL2DestMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination MAC address of incoming layer2 packet." ::= { qtechApProfEntry 4 } qtechApProfL2Pro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the Ethernet type of the incoming layer2 packet." ::= { qtechApProfEntry 5 } qtechApProfL2Vlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming layer2 packet." ::= { qtechApProfEntry 6 } qtechApProfL2SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming layer2 packet." ::= { qtechApProfEntry 7 } -- Ipv4 field qtechApProfIpv4SrcIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source IP address of incoming IPv4 packet." ::= { qtechApProfEntry 8 } qtechApProfIpv4DestIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination IP address of incoming IPv4 packet." ::= { qtechApProfEntry 9 } qtechApProfIpv4Pro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to protocol type of the incoming IPv4 packet." ::= { qtechApProfEntry 10 } qtechApProfIpv4L4SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer source port of incoming IPv4 packet." ::= { qtechApProfEntry 11 } qtechApProfIpv4L4DestPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv4 packet." ::= { qtechApProfEntry 12 } qtechApProfIpv4Vlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming IPv4 packet." ::= { qtechApProfEntry 13 } qtechApProfIpv4SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming IPv4 packet." ::= { qtechApProfEntry 14 } -- IPv6 field qtechApProfIpv6SrcIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source IP address of incoming IPv6 packet." ::= { qtechApProfEntry 15 } qtechApProfIpv6DestIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination IP address of incoming IPv6 packet." ::= { qtechApProfEntry 16 } qtechApProfIpv6Pro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to protocol type of the incoming IPv6 packet." ::= { qtechApProfEntry 17 } qtechApProfIpv6L4SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer source port of incoming IPv6 packet." ::= { qtechApProfEntry 18 } qtechApProfIpv6L4DestPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv6 packet." ::= { qtechApProfEntry 19 } qtechApProfIpv6Vlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming IPv6 packet." ::= { qtechApProfEntry 20 } qtechApProfIpv6SrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming IPv6 packet." ::= { qtechApProfEntry 21 } -- mpls field qtechApProfMplsTopLabel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the top-label of the incoming mpls packet." ::= { qtechApProfEntry 22 } qtechApProfMpls2ndLabel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the 2nd-label of the incoming mpls packet." ::= { qtechApProfEntry 23 } qtechApProfMplsSrcIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source IP address of incoming mpls packet." ::= { qtechApProfEntry 24 } qtechApProfMplsDestIp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the destination IP address of incoming mpls packet." ::= { qtechApProfEntry 25 } qtechApProfMplsVlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the VLAN ID of the incoming mpls packet." ::= { qtechApProfEntry 26 } qtechApProfMplsSrcPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform traffic balancing distribution according to the source port of incoming mpls packet." ::= { qtechApProfEntry 27 } qtechApMIBConformance OBJECT IDENTIFIER ::= { qtechApMIB 2 } qtechApMIBCompliances OBJECT IDENTIFIER ::= { qtechApMIBConformance 1 } qtechApMIBGroups OBJECT IDENTIFIER ::= { qtechApMIBConformance 2 } -- compliance statements qtechApMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Qtech Ap MIB" MODULE -- this module MANDATORY-GROUPS { qtechApMIBGroup } ::= { qtechApMIBCompliances 1 } -- units of conformance qtechApMIBGroup OBJECT-GROUP OBJECTS { qtechApMaxNumber, qtechApCurrentNumber, qtechApPortConfigApIndex, qtechApIndex, qtechApMemberAction, qtechApMaxPtNumber, qtechApFlowBalance, -- qtechApEntryStatus, qtechApConfigNumber, qtechApConfigIndex, qtechApConfigMaxPtNumber, qtechApConfigCurrentPtNumber, qtechApConfigPortMember, qtechApConfigAction, qtechApPortMemberPortIndex, qtechApPortMemberApNumber, qtechApPortMemberAction, qtechApProfL2SrcMac, qtechApProfL2DestMac, qtechApProfL2Pro, qtechApProfL2Vlan, qtechApProfL2SrcPort, qtechApProfIpv4SrcIp, qtechApProfIpv4DestIp, qtechApProfIpv4Pro, qtechApProfIpv4L4SrcPort, qtechApProfIpv4L4DestPort, qtechApProfIpv4Vlan, qtechApProfIpv4SrcPort, qtechApProfIpv6SrcIp, qtechApProfIpv6DestIp, qtechApProfIpv6Pro, qtechApProfIpv6L4SrcPort, qtechApProfIpv6L4DestPort, qtechApProfIpv6Vlan, qtechApProfIpv6SrcPort, qtechApProfMplsTopLabel, qtechApProfMpls2ndLabel, qtechApProfMplsSrcIp, qtechApProfMplsDestIp, qtechApProfMplsVlan, qtechApProfMplsSrcPort } STATUS current DESCRIPTION "A collection of objects providing aggregate port configure." ::= { qtechApMIBGroups 1 } END