TIMETRA-DYNAMIC-SERVICES-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InetAddress, InetAddressType
                                                         FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Counter32, Integer32, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    DateAndTime, DisplayString, MacAddress,
    RowPointer, RowStatus,
    TEXTUAL-CONVENTION, TimeStamp,
    TruthValue
                                                         FROM SNMPv2-TC
    timetraSRMIBModules, tmnxSRConfs,
    tmnxSRNotifyPrefix, tmnxSRObjs
                                                         FROM TIMETRA-GLOBAL-MIB
    sapEncapValue, sapPortId
                                                         FROM TIMETRA-SAP-MIB
    svcId
                                                         FROM TIMETRA-SERV-MIB
    TItemDescription, TNamedItem,
    TNamedItemOrEmpty, TmnxAdminState,
    TmnxAuthPassword, TmnxEnabledDisabled,
    TmnxEncapVal, TmnxPortID, TmnxServId,
    TmnxSubAcctSessionId
                                                         FROM TIMETRA-TC-MIB
    ;

timetraDynSrvMIBModule           MODULE-IDENTITY
    LAST-UPDATED "201601010000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia 7xxx Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision Dynamic
         Services for the Nokia 7xxx device.

         Copyright 2012-2018 Nokia. All rights reserved. Reproduction of this
         document is authorized on the condition that the foregoing copyright
         notice is included.

         This SNMP MIB module (Specification) embodies Nokia's proprietary
         intellectual property. Nokia retains all title and ownership in the
         Specification, including any revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied 'as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "201601010000Z"
    DESCRIPTION
        "Rev 14.0                01 Jan 2016 00:00
         14.0 release of the TIMETRA-DYNAMIC-SERVICES-PROTOCOL-MIB.mib."

    REVISION    "201305310000Z"
    DESCRIPTION
        "Rev 11.0                31 May 2013 12:00
         11.0 release of the TIMETRA-DYNAMIC-SERVICES-PROTOCOL-MIB.mib."

    ::= { timetraSRMIBModules 84 }

TmnxDynSrvAcctStatsType          ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxDynSrvAcctStatsType data type is an enumerated integer that
         describes the values used to identify the type of accounting
         statistics gathered."
    SYNTAX      INTEGER {
        volumeTime (1),
        time       (2)
    }

tmnxDynSvc                       OBJECT IDENTIFIER ::= { tmnxSRObjs 84 }

tmnxDynSvcObjs                   OBJECT IDENTIFIER ::= { tmnxDynSvc 1 }

tmnxDynSvcPlcyTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcPlcyTable allows configuration of policies for Dynamic
         Services."
    ::= { tmnxDynSvcObjs 1 }

tmnxDynSvcPlcyEntry              OBJECT-TYPE
    SYNTAX      TmnxDynSvcPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular Dynamic
         Services profile.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxDynSvcPlcyRowStatus."
    INDEX       { IMPLIED tmnxDynSvcPlcyName }
    ::= { tmnxDynSvcPlcyTable 1 }

TmnxDynSvcPlcyEntry              ::= SEQUENCE
{
    tmnxDynSvcPlcyName               TNamedItem,
    tmnxDynSvcPlcyRowStatus          RowStatus,
    tmnxDynSvcPlcyLastCh             TimeStamp,
    tmnxDynSvcPlcyDescription        TItemDescription,
    tmnxDynSvcPlcyScriptPlcy         TNamedItemOrEmpty,
    tmnxDynSvcPlcyCliUser            TNamedItemOrEmpty,
    tmnxDynSvcPlcySapLimit           Unsigned32
}

tmnxDynSvcPlcyName               OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyName specifies the identifier name of this
         Dynamic Services policy."
    ::= { tmnxDynSvcPlcyEntry 1 }

tmnxDynSvcPlcyRowStatus          OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyRowStatus controls the creation and
         deletion of rows in the table."
    ::= { tmnxDynSvcPlcyEntry 2 }

tmnxDynSvcPlcyLastCh             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyLastCh indicates the sysUpTime at the time
         of the most recent management-initiated change to this conceptual row."
    ::= { tmnxDynSvcPlcyEntry 3 }

tmnxDynSvcPlcyDescription        OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyDescription specifies the description of
         this Dynamic Services policy."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyEntry 4 }

tmnxDynSvcPlcyScriptPlcy         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyScriptPlcy specifies the identifier name of
         the script policy associated with this Dynamic Services policy.

         For a non-empty value, a row with the same value for the object
         tmnxRadScriptPlcyName must exist in the
         TIMETRA-RADIUS-MIB::tmnxRadScriptPlcyTable."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyEntry 5 }

tmnxDynSvcPlcyCliUser            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyCliUser specifies the identifier name of
         the CLI user associated with this Dynamic Services policy.

         For a non-empty value, a row with the same value for the object
         tmnxUserName must exist in the TIMETRA-SECURITY-MIB::tmnxUserTable."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyEntry 6 }

tmnxDynSvcPlcySapLimit           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..131072)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcySapLimit specifies the limit of the number
         of SAPs (Service Access Point) that can be created using this Dynamic
         Services policy.

         Each SAP counts for a dynamic service instance.

         Changing the value from any nonzero value to zero specifies that no
         new SAPs can be created."
    DEFVAL      { 1 }
    ::= { tmnxDynSvcPlcyEntry 7 }

tmnxDynSvcPlcyApTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcPlcyApEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcPlcyApTable allows configuration of accounting policies
         associated with Dynamic Services policies."
    ::= { tmnxDynSvcObjs 2 }

tmnxDynSvcPlcyApEntry            OBJECT-TYPE
    SYNTAX      TmnxDynSvcPlcyApEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular Dynamic
         Services profile.

         Two rows in this table are created automatically by the system for
         each row in the tmnxDynSvcPlcyTable."
    INDEX       {
        tmnxDynSvcPlcyName,
        tmnxDynSvcPlcyApIndex
    }
    ::= { tmnxDynSvcPlcyApTable 1 }

TmnxDynSvcPlcyApEntry            ::= SEQUENCE
{
    tmnxDynSvcPlcyApIndex            Unsigned32,
    tmnxDynSvcPlcyApLastCh           TimeStamp,
    tmnxDynSvcPlcyApName             TNamedItemOrEmpty,
    tmnxDynSvcPlcyApStatsType        TmnxDynSrvAcctStatsType,
    tmnxDynSvcPlcyApUpdateInterval   Unsigned32,
    tmnxDynSvcPlcyApUpdateIvlJitter  Integer32
}

tmnxDynSvcPlcyApIndex            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyApIndex specifies the identifier number of
         this row within the scope of a Dynamic Services policy."
    ::= { tmnxDynSvcPlcyApEntry 1 }

tmnxDynSvcPlcyApLastCh           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyApLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcPlcyApEntry 2 }

tmnxDynSvcPlcyApName             OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyApName specifies the identifier name of a
         RADIUS server policy to be used for accounting.

         For a non-empty value, a row with the same value for the object
         tmnxRadSrvPlcyName must exist in the
         TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyApEntry 3 }

tmnxDynSvcPlcyApStatsType        OBJECT-TYPE
    SYNTAX      TmnxDynSrvAcctStatsType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyApStatsType specifies what type of
         statistics are sent to the accounting server."
    DEFVAL      { volumeTime }
    ::= { tmnxDynSvcPlcyApEntry 4 }

tmnxDynSvcPlcyApUpdateInterval   OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 5..259200)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyApUpdateInterval specifies the time
         interval between consecutive accounting updates when using this
         Dynamic Services policy.

         The value zero specifies that no intermediate updates be sent."
    DEFVAL      { 0 }
    ::= { tmnxDynSvcPlcyApEntry 5 }

tmnxDynSvcPlcyApUpdateIvlJitter  OBJECT-TYPE
    SYNTAX      Integer32 (-10 | 0..3600)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyApUpdateIvlJitter specifies the amount of
         jitter to be applied on the update interval which is configured in
         tmnxDynSvcPlcyApUpdateInterval and can be overruled by RADIUS.

         A value between 0..3600 specifies the amount of jitter in seconds.

         The (default) value -10 corresponds to a jitter value of 10% of the
         update interval.

         The operational value used by the system will never be bigger then 10%
         of the update interval."
    DEFVAL      { -10 }
    ::= { tmnxDynSvcPlcyApEntry 6 }

tmnxDynSvcRange                  OBJECT IDENTIFIER ::= { tmnxDynSvcObjs 3 }

tmnxDynSvcRangeStart             OBJECT-TYPE
    SYNTAX      TmnxServId (0 | 1..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRangeStart specifies the start of the range of
         service identifiers used as dynamic services."
    DEFVAL      { 0 }
    ::= { tmnxDynSvcRange 1 }

tmnxDynSvcRangeEnd               OBJECT-TYPE
    SYNTAX      TmnxServId (0 | 1..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRangeEnd specifies the end of the range of
         service identifiers used as dynamic services.

         The value of tmnxDynSvcRangeEnd must be greater than or equal to the
         value of tmnxDynSvcRangeStart."
    DEFVAL      { 0 }
    ::= { tmnxDynSvcRange 2 }

tmnxDynSvcSapTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcSapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcSapTable contains the Service Access Points (SAPs)
         created for Dynamic Services.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 4 }

tmnxDynSvcSapEntry               OBJECT-TYPE
    SYNTAX      TmnxDynSvcSapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about a particular Dynamic
         Services SAP."
    INDEX       {
        sapPortId,
        sapEncapValue
    }
    ::= { tmnxDynSvcSapTable 1 }

TmnxDynSvcSapEntry               ::= SEQUENCE
{
    tmnxDynSvcSapAcctSessionId       TmnxSubAcctSessionId,
    tmnxDynSvcSapAcctSessionIdCtrl   TmnxSubAcctSessionId,
    tmnxDynSvcSapPolicy              TNamedItemOrEmpty,
    tmnxDynSvcSapScriptsExecuted     Counter32,
    tmnxDynSvcSapScriptsSuccess      Counter32,
    tmnxDynSvcSapLastScriptAction    INTEGER,
    tmnxDynSvcSapLastScriptTime      DateAndTime,
    tmnxDynSvcSapOrphaned            TruthValue,
    tmnxDynSvcSapService             TmnxServId,
    tmnxDynSvcSapLastScriptParams    OCTET STRING
}

tmnxDynSvcSapAcctSessionId       OBJECT-TYPE
    SYNTAX      TmnxSubAcctSessionId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapAcctSessionId indicates the identifier used
         for accounting."
    ::= { tmnxDynSvcSapEntry 1 }

tmnxDynSvcSapAcctSessionIdCtrl   OBJECT-TYPE
    SYNTAX      TmnxSubAcctSessionId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapAcctSessionIdCtrl indicates the identifier
         used for accounting of the Customer Premises Equipment's (CPE) control
         channel that is associated with this SAP."
    ::= { tmnxDynSvcSapEntry 2 }

tmnxDynSvcSapPolicy              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapPolicy indicates the Dynamic Services policy
         associated with this SAP.

         It refers to a conceptual row in the tmnxDynSvcPlcyTable."
    ::= { tmnxDynSvcSapEntry 3 }

tmnxDynSvcSapScriptsExecuted     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapScriptsExecuted indicates the number of
         times a script was executed for this SAP."
    ::= { tmnxDynSvcSapEntry 4 }

tmnxDynSvcSapScriptsSuccess      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapScriptsSuccess indicates the number of times
         a script was successfully executed for this SAP."
    ::= { tmnxDynSvcSapEntry 5 }

tmnxDynSvcSapLastScriptAction    OBJECT-TYPE
    SYNTAX      INTEGER {
        setup    (1),
        modify   (2),
        teardown (3),
        commit   (4),
        revert   (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapLastScriptAction indicates the action of the
         last script executed for this SAP."
    ::= { tmnxDynSvcSapEntry 6 }

tmnxDynSvcSapLastScriptTime      OBJECT-TYPE
    SYNTAX      DateAndTime (SIZE (11))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapLastScriptTime indicates the time when the
         last script executed for this SAP."
    ::= { tmnxDynSvcSapEntry 7 }

tmnxDynSvcSapOrphaned            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxDynSvcSapOrphaned indicates whether the corresponding
         SAP was not deleted after running the teardown portion of the script.

         If set to 'true', the SAP was not deleted, and manual action is needed
         to get rid of the SAP."
    ::= { tmnxDynSvcSapEntry 8 }

tmnxDynSvcSapService             OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapService indicates the parent service of this
         SAP.

         The value zero indicates that the parent service is currently unknown."
    ::= { tmnxDynSvcSapEntry 9 }

tmnxDynSvcSapLastScriptParams    OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..1000))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapLastScriptParams indicates the parameter
         string of the script instance that was last executed on this SAP.

         The value of this object corresponds with the content of the RADIUS
         vendor-specific Alc-Dyn-Serv-Script-Params option.

         The value of this object is subjected to the same constraints as for
         the DisplayString syntax."
    ::= { tmnxDynSvcSapEntry 10 }

tmnxDynSvcSapAcctTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcSapAcctEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcSapAcctTable contains the Dynamic Services SAP's
         accounting information.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 5 }

tmnxDynSvcSapAcctEntry           OBJECT-TYPE
    SYNTAX      TmnxDynSvcSapAcctEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about an accounting instance
         of a particular Dynamic Services SAP."
    INDEX       {
        sapPortId,
        sapEncapValue,
        tmnxDynSvcSapAcctIndex
    }
    ::= { tmnxDynSvcSapAcctTable 1 }

TmnxDynSvcSapAcctEntry           ::= SEQUENCE
{
    tmnxDynSvcSapAcctIndex           Unsigned32,
    tmnxDynSvcSapAcctAcctStatus      TmnxEnabledDisabled,
    tmnxDynSvcSapAcctStatsType       TmnxDynSrvAcctStatsType,
    tmnxDynSvcSapAcctAcctInterval    Unsigned32
}

tmnxDynSvcSapAcctIndex           OBJECT-TYPE
    SYNTAX      Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapAcctIndex specifies the identifier number of
         this conceptual row within the scope of a Dynamic Services SAP."
    ::= { tmnxDynSvcSapAcctEntry 1 }

tmnxDynSvcSapAcctAcctStatus      OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapAcctAcctStatus indicates the operational
         status of this accounting instance."
    ::= { tmnxDynSvcSapAcctEntry 2 }

tmnxDynSvcSapAcctStatsType       OBJECT-TYPE
    SYNTAX      TmnxDynSrvAcctStatsType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapAcctStatsType indicates the actual type of
         accounting statistics gathered by this accounting instance.

         It can be specified by the associated Dynamic Services policy (the
         object tmnxDynSvcPlcyApStatsType), or by the AAA server."
    ::= { tmnxDynSvcSapAcctEntry 3 }

tmnxDynSvcSapAcctAcctInterval    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "minutes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapAcctAcctInterval indicates the actual
         accounting update interval for this accounting instance.

         It can be specified by the associated Dynamic Services policy (the
         object tmnxDynSvcPlcyApUpdateInterval), or by the AAA server."
    ::= { tmnxDynSvcSapAcctEntry 4 }

tmnxDynSvcRootObjTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcRootObjEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcRootObjTable contains information of the Root objects
         created by Dynamic Services.

         A root object is an object created by a Dynamic Service of which the
         parent is not created by a Dynamic Service.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 6 }

tmnxDynSvcRootObjEntry           OBJECT-TYPE
    SYNTAX      TmnxDynSvcRootObjEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about a Dynamic Services root
         object."
    INDEX       { tmnxDynSvcRootObjIndex }
    ::= { tmnxDynSvcRootObjTable 1 }

TmnxDynSvcRootObjEntry           ::= SEQUENCE
{
    tmnxDynSvcRootObjIndex           Unsigned32,
    tmnxDynSvcRootObjInstance        RowPointer,
    tmnxDynSvcRootObjOrphanTime      TimeStamp,
    tmnxDynSvcRootObjSnippetName     DisplayString,
    tmnxDynSvcRootObjSnippetInstance DisplayString
}

tmnxDynSvcRootObjIndex           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRootObjIndex specifies the index that
         identifies this conceptual row within the scope of a Dynamic Services
         Root object."
    ::= { tmnxDynSvcRootObjEntry 1 }

tmnxDynSvcRootObjInstance        OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRootObjInstance indicates the concerned root
         object."
    ::= { tmnxDynSvcRootObjEntry 2 }

tmnxDynSvcRootObjOrphanTime      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRootObjOrphanTime indicates the sysUpTime when
         the object was orphaned.

         When the object is not orphaned or when the time is unknown, the
         tmnxDynSvcRootObjOrphanTime is set to 0."
    ::= { tmnxDynSvcRootObjEntry 3 }

tmnxDynSvcRootObjSnippetName     OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRootObjSnippetName indicates the type-name from
         the snippet to which the root object belongs.

         A 'snippet' is the name of a set of python functions to create, modify
         or destroy configuration; for example: a snippet called 'vprn' in
         order to create/modify/destroy VPRN services.

         When the tmnxDynSvcRootObjSnippetName is an empty string it implies
         that there is no snippet."
    ::= { tmnxDynSvcRootObjEntry 4 }

tmnxDynSvcRootObjSnippetInstance OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcRootObjSnippetInstance indicates the identifier
         from the snippet to which the object belongs and is unique within the
         snippet scope.

         A 'snippet instance' is an instance of the configuration created by a
         snippet; for example: a particular VPRN service.

         When the tmnxDynSvcRootObjSnippetInstance is an empty string it
         implies that there is no snippet."
    ::= { tmnxDynSvcRootObjEntry 5 }

tmnxDynSvcStatsTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcStatsTable shows statistics information of the Dynamic
         Services."
    ::= { tmnxDynSvcObjs 7 }

tmnxDynSvcStatsEntry             OBJECT-TYPE
    SYNTAX      TmnxDynSvcStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents a statistic counter.

         Entries in this table are created and destroyed by the system.

         Rows are only created where the statistics value is nonzero; this
         allows faster walking through this table; hence, it is recommended to
         perform only get-next-request operations to retrieve information from
         this table."
    INDEX       { tmnxDynSvcStatsId }
    ::= { tmnxDynSvcStatsTable 1 }

TmnxDynSvcStatsEntry             ::= SEQUENCE
{
    tmnxDynSvcStatsId                Unsigned32,
    tmnxDynSvcStatsDescr             TItemDescription,
    tmnxDynSvcStatsVal               Counter32
}

tmnxDynSvcStatsId                OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcStatsId specifies the number that identifies
         this conceptual row within the scope of a Dynamic Services."
    ::= { tmnxDynSvcStatsEntry 1 }

tmnxDynSvcStatsDescr             OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcStatsDescr indicates the description
         of the statistic counter contained in this conceptual row."
    ::= { tmnxDynSvcStatsEntry 2 }

tmnxDynSvcStatsVal               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcStatsVal indicates the value of the
         statistics contained in this conceptual row."
    ::= { tmnxDynSvcStatsEntry 3 }

tmnxDynSvcSnippetTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcSnippetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcSnippetTable contains information of the snippets
         created by Dynamic Services.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 8 }

tmnxDynSvcSnippetEntry           OBJECT-TYPE
    SYNTAX      TmnxDynSvcSnippetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about a snippet within the
         scope of Dynamic Services."
    INDEX       {
        tmnxDynSvcSnippetName,
        tmnxDynSvcSnippetInstance
    }
    ::= { tmnxDynSvcSnippetTable 1 }

TmnxDynSvcSnippetEntry           ::= SEQUENCE
{
    tmnxDynSvcSnippetName            DisplayString,
    tmnxDynSvcSnippetInstance        DisplayString,
    tmnxDynSvcSnippetRefCount        Counter32,
    tmnxDynSvcSnippetDictLength      Unsigned32
}

tmnxDynSvcSnippetName            OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSnippetName specifies the type-name from the
         snippet that identifies this conceptual row within the scope of a
         Dynamic Services.

         The type-name is used to lookup the set of python functions to create,
         modify or destroy configuration; for example: a snippet with type-name
         'vprn' could be used to create/modify/destroy VPRN services."
    ::= { tmnxDynSvcSnippetEntry 1 }

tmnxDynSvcSnippetInstance        OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..48))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetInstance specifies the
         identifier from the snippet that in combination with the type-name
         uniquely identifies a snippet.

         A 'snippet instance' is an instance of the configuration created by a
         snippet; for example: a particular VPRN service."
    ::= { tmnxDynSvcSnippetEntry 2 }

tmnxDynSvcSnippetRefCount        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRefCount indicates the number
         of times this snippet is referenced by other snippets."
    ::= { tmnxDynSvcSnippetEntry 3 }

tmnxDynSvcSnippetDictLength      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetDictLength indicates the
         length of the python dictionary stored for this snippet."
    ::= { tmnxDynSvcSnippetEntry 4 }

tmnxDynSvcSnippetRootObjTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcSnippetRootObjEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcSnippetRootObjTable contains information of the root
         objects created by a snippet within the scope of a Dynamic Service.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 9 }

tmnxDynSvcSnippetRootObjEntry    OBJECT-TYPE
    SYNTAX      TmnxDynSvcSnippetRootObjEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about a root object created
         by a snippet within the scope of a Dynamic Service."
    INDEX       {
        tmnxDynSvcSnippetName,
        tmnxDynSvcSnippetInstance,
        tmnxDynSvcSnippetRootObjIdx
    }
    ::= { tmnxDynSvcSnippetRootObjTable 1 }

TmnxDynSvcSnippetRootObjEntry    ::= SEQUENCE
{
    tmnxDynSvcSnippetRootObjIdx      Unsigned32,
    tmnxDynSvcSnippetRootObjOid      RowPointer
}

tmnxDynSvcSnippetRootObjIdx      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRootObjIdx specifies the
         index that identifies this conceptual row within the scope of the
         snippet."
    ::= { tmnxDynSvcSnippetRootObjEntry 1 }

tmnxDynSvcSnippetRootObjOid      OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRootObjOid indicates the
         concerned root object that was created by the snippet."
    ::= { tmnxDynSvcSnippetRootObjEntry 2 }

tmnxDynSvcSnippetRefTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcSnippetRefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcSnippetRefTable contains information of the referenced
         snippets created by a python script within the scope of a Dynamic
         Service.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 10 }

tmnxDynSvcSnippetRefEntry        OBJECT-TYPE
    SYNTAX      TmnxDynSvcSnippetRefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about a referenced snippet
         created by a python script within the scope of a Dynamic Service."
    INDEX       {
        tmnxDynSvcSnippetName,
        tmnxDynSvcSnippetInstance,
        tmnxDynSvcSnippetRefIdx
    }
    ::= { tmnxDynSvcSnippetRefTable 1 }

TmnxDynSvcSnippetRefEntry        ::= SEQUENCE
{
    tmnxDynSvcSnippetRefIdx          Unsigned32,
    tmnxDynSvcSnippetRefSnipName     DisplayString,
    tmnxDynSvcSnippetRefSnipInst     DisplayString
}

tmnxDynSvcSnippetRefIdx          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRefIdx specifies the index
         that identifies this conceptual row within the scope of the snippet."
    ::= { tmnxDynSvcSnippetRefEntry 1 }

tmnxDynSvcSnippetRefSnipName     OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRefSnipName indicates the
         type-name from the snippet created or referenced by a python script."
    ::= { tmnxDynSvcSnippetRefEntry 2 }

tmnxDynSvcSnippetRefSnipInst     OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..48))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRefSnipInst indicates the
         identifier from the snippet created or referenced by a python script."
    ::= { tmnxDynSvcSnippetRefEntry 3 }

tmnxDynSvcSnippetResIdTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcSnippetResIdEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcSnippetResIdTable contains information of the
         identifiers reserved by a python script within the scope of a Dynamic
         Service.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 11 }

tmnxDynSvcSnippetResIdEntry      OBJECT-TYPE
    SYNTAX      TmnxDynSvcSnippetResIdEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about an identifier reserved
         by a python script within the scope of a Dynamic Service."
    INDEX       {
        tmnxDynSvcSnippetName,
        tmnxDynSvcSnippetInstance,
        tmnxDynSvcSnippetResIdIdx
    }
    ::= { tmnxDynSvcSnippetResIdTable 1 }

TmnxDynSvcSnippetResIdEntry      ::= SEQUENCE
{
    tmnxDynSvcSnippetResIdIdx        Unsigned32,
    tmnxDynSvcSnippetResIdType       DisplayString,
    tmnxDynSvcSnippetResIdValue      DisplayString
}

tmnxDynSvcSnippetResIdIdx        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetResIdIdx specifies the index
         that identifies this conceptual row within the scope of the snippet."
    ::= { tmnxDynSvcSnippetResIdEntry 1 }

tmnxDynSvcSnippetResIdType       OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetResIdType indicates the
         type-name from the identifier reserved by a python script."
    ::= { tmnxDynSvcSnippetResIdEntry 2 }

tmnxDynSvcSnippetResIdValue      OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..48))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetResIdValue indicates the
         value from the identifier reserved by a python script."
    ::= { tmnxDynSvcSnippetResIdEntry 3 }

tmnxDynSvcTimer                  OBJECT IDENTIFIER ::= { tmnxDynSvcObjs 12 }

tmnxDynSvcTimerAccSetupTimeout   OBJECT-TYPE
    SYNTAX      Unsigned32 (2..3600)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcTimerAccSetupTimeout specifies the timeout in
         seconds after which a script is cancelled for setup actions received
         via RADIUS Access-Accept messages."
    DEFVAL      { 30 }
    ::= { tmnxDynSvcTimer 1 }

tmnxDynSvcPlcyAuthTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcPlcyAuthEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcPlcyAuthTable allows configuration of authentication
         parameters associated with Dynamic Services policies."
    ::= { tmnxDynSvcObjs 13 }

tmnxDynSvcPlcyAuthEntry          OBJECT-TYPE
    SYNTAX      TmnxDynSvcPlcyAuthEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular Dynamic
         Services profile.

         An entry in this table is automatically created by the system for each
         row in the tmnxDynSvcPlcyTable."
    AUGMENTS    { tmnxDynSvcPlcyEntry }
    ::= { tmnxDynSvcPlcyAuthTable 1 }

TmnxDynSvcPlcyAuthEntry          ::= SEQUENCE
{
    tmnxDynSvcPlcyAuthLastCh         TimeStamp,
    tmnxDynSvcPlcyAuthRadiusSrvPlcy  TNamedItemOrEmpty,
    tmnxDynSvcPlcyAuthPassword       TmnxAuthPassword,
    tmnxDynSvcPlcyAuthLocalDb        TNamedItemOrEmpty
}

tmnxDynSvcPlcyAuthLastCh         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyAuthLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcPlcyAuthEntry 1 }

tmnxDynSvcPlcyAuthRadiusSrvPlcy  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyAuthRadiusSrvPlcy specifies the RADIUS
         server policy to be used for authentication.

         For a non-empty value, a row with the same value for the object
         tmnxRadSrvPlcyName must exist in the
         TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyAuthEntry 2 }

tmnxDynSvcPlcyAuthPassword       OBJECT-TYPE
    SYNTAX      TmnxAuthPassword
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyAuthPassword specifies the password for
         going to the RADIUS server. An empty string is returned on SNMP GET
         requests."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyAuthEntry 3 }

tmnxDynSvcPlcyAuthLocalDb        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcPlcyAuthLocalDb specifies the local database to
         be used for authentication.

         For a non-empty value, a row with the same value for the object
         tmnxDynSvcLocAuthDbName must exist in the tmnxDynSvcLocalAuthDbTable."
    DEFVAL      { "" }
    ::= { tmnxDynSvcPlcyAuthEntry 4 }

tmnxDynSvcCaptureSapTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcCaptureSapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains Dynamic Services configuration for capture SAPs.
         It allows to dynamically create dynamic SAPs based on incoming data
         packets.

         A row is automatically created in the tmnxDynSvcCaptureSapTable for an
         entry in the sapBaseInfoTable where the value of the object sapSubType
         is equal to 'capture' and the SAP's encapsulation allows creation of
         dynamic SAPs."
    ::= { tmnxDynSvcObjs 14 }

tmnxDynSvcCaptureSapEntry        OBJECT-TYPE
    SYNTAX      TmnxDynSvcCaptureSapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Dynamic Services specific configuration for a capture SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { tmnxDynSvcCaptureSapTable 1 }

TmnxDynSvcCaptureSapEntry        ::= SEQUENCE
{
    tmnxDynSvcCaptureSapLastCh       TimeStamp,
    tmnxDynSvcCaptureSapAdminState   TmnxAdminState,
    tmnxDynSvcCaptureSapPolicy       TNamedItemOrEmpty
}

tmnxDynSvcCaptureSapLastCh       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCaptureSapLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcCaptureSapEntry 1 }

tmnxDynSvcCaptureSapAdminState   OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCaptureSapAdminState specifies the
         administrative state of this capture SAP.

         If the value of this field is set 'inService', data packets coming in
         on this capture SAP will get authenticated and, if successful, result
         in the creation of Dynamic Services SAPs."
    DEFVAL      { outOfService }
    ::= { tmnxDynSvcCaptureSapEntry 2 }

tmnxDynSvcCaptureSapPolicy       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCaptureSapPolicy specifies
         the Dynamic Services policy associated with this capture SAP.
         Its use is twofold:
         - define the parameters to authenticate the incoming data packet
         - used as default Dynamic Services Policy when authentication does
           not return one.

         It refers to a conceptual row in the tmnxDynSvcPlcyTable."
    DEFVAL      { "" }
    ::= { tmnxDynSvcCaptureSapEntry 3 }

tmnxDynSvcCaptureSapStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcCaptureSapStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcCaptureSapStatsTable contains statistics about the
         capture SAPs of this system."
    ::= { tmnxDynSvcObjs 15 }

tmnxDynSvcCaptureSapStatsEntry   OBJECT-TYPE
    SYNTAX      TmnxDynSvcCaptureSapStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents statistics about a particular capture
         SAP.

         Rows are created and destroyed automatically by the system."
    AUGMENTS    { tmnxDynSvcCaptureSapEntry }
    ::= { tmnxDynSvcCaptureSapStatsTable 1 }

TmnxDynSvcCaptureSapStatsEntry   ::= SEQUENCE
{ tmnxDynSvcCSapStatsRxPackets     Counter32 }

tmnxDynSvcCSapStatsRxPackets     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCSapStatsRxPackets indicates the total number
         of data packets received by this capture SAP."
    ::= { tmnxDynSvcCaptureSapStatsEntry 1 }

tmnxDynSvcCaptureSapDropTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcCaptureSapDropEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcCaptureSapDropTable contains data-trigger related drop
         statistics about the capture SAPs of this system."
    ::= { tmnxDynSvcObjs 16 }

tmnxDynSvcCaptureSapDropEntry    OBJECT-TYPE
    SYNTAX      TmnxDynSvcCaptureSapDropEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents information about a specific drop
         reason.

         Rows are created and destroyed automatically by the system."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxDynSvcCSapDropIndex
    }
    ::= { tmnxDynSvcCaptureSapDropTable 1 }

TmnxDynSvcCaptureSapDropEntry    ::= SEQUENCE
{
    tmnxDynSvcCSapDropIndex          Unsigned32,
    tmnxDynSvcCSapDropReason         DisplayString,
    tmnxDynSvcCSapDropCounter        Counter32
}

tmnxDynSvcCSapDropIndex          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..9)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCSapDropIndex specifies the index of this row."
    ::= { tmnxDynSvcCaptureSapDropEntry 1 }

tmnxDynSvcCSapDropReason         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCSapDropReason indicates a descriptive reason
         explaining the cause of drop."
    ::= { tmnxDynSvcCaptureSapDropEntry 2 }

tmnxDynSvcCSapDropCounter        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcCSapDropCounter indicates the amount of
         data-triggers dropped corresponding to this row."
    ::= { tmnxDynSvcCaptureSapDropEntry 3 }

tmnxDynSvcDataTriggerTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcDataTriggerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcDataTriggerTable contains the Data Triggers created for
         Dynamic Services.

         Conceptual rows in this table are created and destroyed automatically
         by the system."
    ::= { tmnxDynSvcObjs 17 }

tmnxDynSvcDataTriggerEntry       OBJECT-TYPE
    SYNTAX      TmnxDynSvcDataTriggerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row presents information about a particular Data
         Trigger."
    INDEX       {
        sapPortId,
        sapEncapValue
    }
    ::= { tmnxDynSvcDataTriggerTable 1 }

TmnxDynSvcDataTriggerEntry       ::= SEQUENCE
{
    tmnxDynSvcDTriggerAcctSessionId  TmnxSubAcctSessionId,
    tmnxDynSvcDTriggerMacAddress     MacAddress,
    tmnxDynSvcDTriggerIpAddressType  InetAddressType,
    tmnxDynSvcDTriggerIpAddress      InetAddress,
    tmnxDynSvcDTriggerState          INTEGER
}

tmnxDynSvcDTriggerAcctSessionId  OBJECT-TYPE
    SYNTAX      TmnxSubAcctSessionId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcDTriggerAcctSessionId indicates the identifier
         used for accounting."
    ::= { tmnxDynSvcDataTriggerEntry 1 }

tmnxDynSvcDTriggerMacAddress     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcDTriggerMacAddress indicates the MAC address of
         the incoming data packet triggering the creation of this row."
    ::= { tmnxDynSvcDataTriggerEntry 2 }

tmnxDynSvcDTriggerIpAddressType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcDTriggerIpAddressType indicates the type of
         address stored in tmnxDynSvcDTriggerIpAddress."
    ::= { tmnxDynSvcDataTriggerEntry 3 }

tmnxDynSvcDTriggerIpAddress      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcDTriggerIpAddress indicates the IP address of
         the incoming data packet triggering the creation of this row. If this
         row was created by a non-IP packet, the value of
         tmnxDynSvcDTriggerIpAddressType returns 'unknown'."
    ::= { tmnxDynSvcDataTriggerEntry 4 }

tmnxDynSvcDTriggerState          OBJECT-TYPE
    SYNTAX      INTEGER {
        pending    (1),
        accepted   (2),
        sapCreated (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcDTriggerState indicates the current state of
         the Data Trigger corresponding to this row:
         - 'pending'   : authentication is going on
         - 'accepted'  : authentication has been finished and was successful
         - 'sapCreated': the dynamic SAP has been created"
    ::= { tmnxDynSvcDataTriggerEntry 5 }

tmnxDynSvcLocalAuthDbTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcLocalAuthDbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcLocalAuthDbTable allows configuration of local
         authentication databases for data-triggered Dynamic Services."
    ::= { tmnxDynSvcObjs 18 }

tmnxDynSvcLocalAuthDbEntry       OBJECT-TYPE
    SYNTAX      TmnxDynSvcLocalAuthDbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular database.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxDynSvcLocAuthDbRowStatus."
    INDEX       { IMPLIED tmnxDynSvcLocAuthDbName }
    ::= { tmnxDynSvcLocalAuthDbTable 1 }

TmnxDynSvcLocalAuthDbEntry       ::= SEQUENCE
{
    tmnxDynSvcLocAuthDbName          TNamedItem,
    tmnxDynSvcLocAuthDbRowStatus     RowStatus,
    tmnxDynSvcLocAuthDbLastCh        TimeStamp,
    tmnxDynSvcLocAuthDbAdminState    TmnxAdminState,
    tmnxDynSvcLocAuthDbDescription   TItemDescription
}

tmnxDynSvcLocAuthDbName          OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocAuthDbName specifies the identifier name of
         this database."
    ::= { tmnxDynSvcLocalAuthDbEntry 1 }

tmnxDynSvcLocAuthDbRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocAuthDbRowStatus controls the creation and
         deletion of rows in the table."
    ::= { tmnxDynSvcLocalAuthDbEntry 2 }

tmnxDynSvcLocAuthDbLastCh        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocAuthDbLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcLocalAuthDbEntry 3 }

tmnxDynSvcLocAuthDbAdminState    OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocAuthDbAdminState specifies the
         administrative state of this database."
    DEFVAL      { outOfService }
    ::= { tmnxDynSvcLocalAuthDbEntry 4 }

tmnxDynSvcLocAuthDbDescription   OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocAuthDbDescription specifies the description
         of this database."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbEntry 5 }

tmnxDynSvcLocalAuthDbUserTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcLocalAuthDbUserEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcLocalAuthDbUserTable allows configuration of user
         entries in the local authentication databases defined in the
         tmnxDynSvcLocalAuthDbTable."
    ::= { tmnxDynSvcObjs 19 }

tmnxDynSvcLocalAuthDbUserEntry   OBJECT-TYPE
    SYNTAX      TmnxDynSvcLocalAuthDbUserEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular user entry.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxDynSvcLocADbUsrRowStatus."
    INDEX       {
        tmnxDynSvcLocAuthDbName,
        tmnxDynSvcLocADbUsrName
    }
    ::= { tmnxDynSvcLocalAuthDbUserTable 1 }

TmnxDynSvcLocalAuthDbUserEntry   ::= SEQUENCE
{
    tmnxDynSvcLocADbUsrName          DisplayString,
    tmnxDynSvcLocADbUsrRowStatus     RowStatus,
    tmnxDynSvcLocADbUsrLastCh        TimeStamp,
    tmnxDynSvcLocADbUsrAdminState    TmnxAdminState,
    tmnxDynSvcLocADbUsrDescription   TItemDescription
}

tmnxDynSvcLocADbUsrName          OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbUsrName specifies the user-name of this
         entry."
    ::= { tmnxDynSvcLocalAuthDbUserEntry 1 }

tmnxDynSvcLocADbUsrRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbUsrRowStatus controls the creation and
         deletion of rows in the table."
    ::= { tmnxDynSvcLocalAuthDbUserEntry 2 }

tmnxDynSvcLocADbUsrLastCh        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbUsrLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcLocalAuthDbUserEntry 3 }

tmnxDynSvcLocADbUsrAdminState    OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbUsrAdminState specifies the
         administrative state of this user entry."
    DEFVAL      { outOfService }
    ::= { tmnxDynSvcLocalAuthDbUserEntry 4 }

tmnxDynSvcLocADbUsrDescription   OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbUsrDescription specifies the description
         of this user entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbUserEntry 5 }

tmnxDynSvcLocalAuthDbSapTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcLocalAuthDbSapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcLocalAuthDbSapTable allows configuration of per-user SAP
         entries in the local authentication databases defined in the
         tmnxDynSvcLocalAuthDbUserTable."
    ::= { tmnxDynSvcObjs 20 }

tmnxDynSvcLocalAuthDbSapEntry    OBJECT-TYPE
    SYNTAX      TmnxDynSvcLocalAuthDbSapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular per-user SAP
         entry.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxDynSvcLocADbSapRowStatus."
    INDEX       {
        tmnxDynSvcLocAuthDbName,
        tmnxDynSvcLocADbUsrName,
        tmnxDynSvcLocADbSapIndex
    }
    ::= { tmnxDynSvcLocalAuthDbSapTable 1 }

TmnxDynSvcLocalAuthDbSapEntry    ::= SEQUENCE
{
    tmnxDynSvcLocADbSapIndex         Unsigned32,
    tmnxDynSvcLocADbSapRowStatus     RowStatus,
    tmnxDynSvcLocADbSapLastCh        TimeStamp,
    tmnxDynSvcLocADbSapSapId         DisplayString,
    tmnxDynSvcLocADbSapPolicy        TNamedItemOrEmpty,
    tmnxDynSvcLocADbSapScriptParams1 DisplayString,
    tmnxDynSvcLocADbSapScriptParams2 DisplayString,
    tmnxDynSvcLocADbSapScriptParams3 DisplayString,
    tmnxDynSvcLocADbSapScriptParams4 DisplayString
}

tmnxDynSvcLocADbSapIndex         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..32)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapIndex specifies the index of this
         entry."
    ::= { tmnxDynSvcLocalAuthDbSapEntry 1 }

tmnxDynSvcLocADbSapRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapRowStatus controls the creation and
         deletion of rows in the table."
    ::= { tmnxDynSvcLocalAuthDbSapEntry 2 }

tmnxDynSvcLocADbSapLastCh        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcLocalAuthDbSapEntry 3 }

tmnxDynSvcLocADbSapSapId         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapSapId specifies the SAP identifier of
         this SAP entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbSapEntry 4 }

tmnxDynSvcLocADbSapPolicy        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapPolicy specifies the Dynamic Services
         policy of this SAP entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbSapEntry 5 }

tmnxDynSvcLocADbSapScriptParams1 OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..250))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapScriptParams1 specifies the Python
         script parameters of this SAP entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbSapEntry 6 }

tmnxDynSvcLocADbSapScriptParams2 OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..250))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapScriptParams2 specifies the Python
         script parameters of this SAP entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbSapEntry 7 }

tmnxDynSvcLocADbSapScriptParams3 OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..250))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapScriptParams3 specifies the Python
         script parameters of this SAP entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbSapEntry 8 }

tmnxDynSvcLocADbSapScriptParams4 OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..250))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbSapScriptParams4 specifies the Python
         script parameters of this SAP entry."
    DEFVAL      { "" }
    ::= { tmnxDynSvcLocalAuthDbSapEntry 9 }

tmnxDynSvcLocalAuthDbAcctTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxDynSvcLocalAuthDbAcctEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxDynSvcLocalAuthDbAcctTable allows accounting configuration of
         per-user SAP entries in the local authentication databases defined in
         the tmnxDynSvcLocalAuthDbSapTable."
    ::= { tmnxDynSvcObjs 21 }

tmnxDynSvcLocalAuthDbAcctEntry   OBJECT-TYPE
    SYNTAX      TmnxDynSvcLocalAuthDbAcctEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a particular accounting
         instance.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxDynSvcLocADbAcctRowStatus."
    INDEX       {
        tmnxDynSvcLocAuthDbName,
        tmnxDynSvcLocADbUsrName,
        tmnxDynSvcLocADbSapIndex,
        tmnxDynSvcLocADbAcctIndex
    }
    ::= { tmnxDynSvcLocalAuthDbAcctTable 1 }

TmnxDynSvcLocalAuthDbAcctEntry   ::= SEQUENCE
{
    tmnxDynSvcLocADbAcctIndex        Unsigned32,
    tmnxDynSvcLocADbAcctRowStatus    RowStatus,
    tmnxDynSvcLocADbAcctLastCh       TimeStamp,
    tmnxDynSvcLocADbAcctStatsType    INTEGER,
    tmnxDynSvcLocADbAcctUpdateIvl    Unsigned32
}

tmnxDynSvcLocADbAcctIndex        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbAcctIndex specifies the accounting
         instance."
    ::= { tmnxDynSvcLocalAuthDbAcctEntry 1 }

tmnxDynSvcLocADbAcctRowStatus    OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbAcctRowStatus controls the creation and
         deletion of rows in the table."
    ::= { tmnxDynSvcLocalAuthDbAcctEntry 2 }

tmnxDynSvcLocADbAcctLastCh       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbAcctLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { tmnxDynSvcLocalAuthDbAcctEntry 3 }

tmnxDynSvcLocADbAcctStatsType    OBJECT-TYPE
    SYNTAX      INTEGER {
        off        (1),
        volumeTime (2),
        time       (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbAcctStatsType specifies the type of
         statistics."
    DEFVAL      { off }
    ::= { tmnxDynSvcLocalAuthDbAcctEntry 4 }

tmnxDynSvcLocADbAcctUpdateIvl    OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 5..259200)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcLocADbAcctUpdateIvl specifies the time interval
         between consecutive accounting updates.

         The value zero specifies that no intermediate updates be sent."
    DEFVAL      { 0 }
    ::= { tmnxDynSvcLocalAuthDbAcctEntry 5 }

tmnxDynSvcPlcyTableLastCh        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcPlcyTableLastCh indicates the value
         of sysUpTime at the time of the last modification of an entry in the
         tmnxDynSvcPlcyTable."
    ::= { tmnxDynSvcObjs 100 }

tmnxDynSvcPlcyApTableLastCh      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcPlcyApTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcPlcyApTable."
    ::= { tmnxDynSvcObjs 101 }

tmnxDynSvcSapTableLastCh         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxDynSvcSapTableLastCh indicates the sysUpTime at the
         time of the last change of a row in the tmnxDynSvcSapTable or an
         associated row in the tmnxDynSvcSapAcctTable.

         If no changes occurred since the last re-initialization of the local
         network management subsystem, then this object contains a zero value."
    ::= { tmnxDynSvcObjs 102 }

tmnxDynSvcRootObjTableLastCh     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcRootObjTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcRootObjTable."
    ::= { tmnxDynSvcObjs 103 }

tmnxDynSvcNonStoredRootObjCount  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcNonStoredRootObjCount indicates the
         number of root objects that are currently not stored in the
         tmnxDynSvcRootObjTable.

         The value of tmnxDynSvcNonStoredRootObjCount can go back to 0 when the
         objects that could not be stored in the tmnxDynSvcRootObjTable are
         deleted again."
    ::= { tmnxDynSvcObjs 104 }

tmnxDynSvcSnippetTableLastCh     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcSnippetTable."
    ::= { tmnxDynSvcObjs 105 }

tmnxDynSvcSnipRootObjTblLastCh   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnipRootObjTblLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcSnippetRootObjTable."
    ::= { tmnxDynSvcObjs 106 }

tmnxDynSvcSnippetRefTableLastCh  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetRefTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcSnippetRefTable."
    ::= { tmnxDynSvcObjs 107 }

tmnxDynSvcSnippetResIdTblLastCh  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcSnippetResIdTblLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcSnippetResIdTable."
    ::= { tmnxDynSvcObjs 108 }

tmnxDynSvcStatsLastClearedTime   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcStatsLastClearedTime indicates the
         value of sysUpTime at the time when the counters in
         tmnxDynSvcStatsTable were last cleared."
    ::= { tmnxDynSvcObjs 109 }

tmnxDynSvcPlcyAuthTableLastCh    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcPlcyAuthTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcPlcyAuthTable."
    ::= { tmnxDynSvcObjs 110 }

tmnxDynSvcCaptureSapTableLastCh  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcCaptureSapTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcCaptureSapTable."
    ::= { tmnxDynSvcObjs 111 }

tmnxDynSvcCSapStatsLastClearTime OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcCSapStatsLastClearTime indicates the
         value of sysUpTime at the time when the counters in
         tmnxDynSvcCaptureSapStatsTable were last cleared."
    ::= { tmnxDynSvcObjs 112 }

tmnxDynSvcDataTriggerTableLastCh OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcDataTriggerTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcDataTriggerTable."
    ::= { tmnxDynSvcObjs 113 }

tmnxDynSvcLocADbTableLastCh      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcLocADbTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcLocalAuthDbTable."
    ::= { tmnxDynSvcObjs 114 }

tmnxDynSvcLocADbUsrTableLastCh   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcLocADbUsrTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcLocalAuthDbUserTable."
    ::= { tmnxDynSvcObjs 115 }

tmnxDynSvcLocADbSapTableLastCh   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcLocADbSapTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcLocalAuthDbSapTable."
    ::= { tmnxDynSvcObjs 116 }

tmnxDynSvcLocADbAcctTableLastCh  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxDynSvcLocADbAcctTableLastCh indicates the
         value of sysUpTime at the time of the last modification of an entry in
         the tmnxDynSvcLocalAuthDbAcctTable."
    ::= { tmnxDynSvcObjs 117 }

tmnxDynSvcNotificationObjs       OBJECT IDENTIFIER ::= { tmnxDynSvc 2 }

tmnxDynSvcNotifDescription       OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object tmnxDynSvcNotifDescription is a printable character string."
    ::= { tmnxDynSvcNotificationObjs 1 }

tmnxDynSvcNotifSapPortId         OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object tmnxDynSvcNotifSapPortId is the ID number of the access
         port where a SAP is defined."
    ::= { tmnxDynSvcNotificationObjs 2 }

tmnxDynSvcNotifSapEncapValue     OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object tmnxDynSvcNotifSapEncapValue is the value of the label used
         to identify a SAP on the access port specified by
         tmnxDynSvcNotifSapPortId."
    ::= { tmnxDynSvcNotificationObjs 3 }

tmnxDynSvcNotifSapAcctSessionId  OBJECT-TYPE
    SYNTAX      TmnxSubAcctSessionId
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object tmnxDynSvcNotifSapAcctSessionId is the value of the
         identifier used for accounting."
    ::= { tmnxDynSvcNotificationObjs 4 }

tmnxDynSvcConformance            OBJECT IDENTIFIER ::= { tmnxSRConfs 84 }

tmnxDynSvcCompliances            OBJECT IDENTIFIER ::= { tmnxDynSvcConformance 1 }

tmnxDynSvcCompliance             MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of Dynamic Services on Nokia
         7xxx series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxDynSvcGroup
        }
    ::= { tmnxDynSvcCompliances 1 }

tmnxDynSvcNotifyCompliance       MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for Dynamic Services notifications on Nokia
         SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxDynSvcNotifyGroup
        }
    ::= { tmnxDynSvcCompliances 2 }

tmnxDynSvcV14v0Compliance        MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of Dynamic Services on Nokia
         7xxx series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxDynSvcV14v0Group,
            tmnxDynSvcObsoletedGroup
        }
    ::= { tmnxDynSvcCompliances 3 }

tmnxDynSvcGroups                 OBJECT IDENTIFIER ::= { tmnxDynSvcConformance 2 }

tmnxDynSvcGroup                  OBJECT-GROUP
    OBJECTS     {
        tmnxDynSvcPlcyRowStatus,
        tmnxDynSvcPlcyLastCh,
        tmnxDynSvcPlcyDescription,
        tmnxDynSvcPlcyScriptPlcy,
        tmnxDynSvcPlcyCliUser,
        tmnxDynSvcPlcySapLimit,
        tmnxDynSvcPlcyTableLastCh,
        tmnxDynSvcPlcyApLastCh,
        tmnxDynSvcPlcyApName,
        tmnxDynSvcPlcyApStatsType,
        tmnxDynSvcPlcyApUpdateInterval,
        tmnxDynSvcPlcyApTableLastCh,
        tmnxDynSvcRangeStart,
        tmnxDynSvcRangeEnd,
        tmnxDynSvcSapAcctSessionId,
        tmnxDynSvcSapAcctSessionIdCtrl,
        tmnxDynSvcSapPolicy,
        tmnxDynSvcSapScriptsExecuted,
        tmnxDynSvcSapScriptsSuccess,
        tmnxDynSvcSapLastScriptAction,
        tmnxDynSvcSapLastScriptTime,
        tmnxDynSvcSapOrphaned,
        tmnxDynSvcSapService,
        tmnxDynSvcSapLastScriptParams,
        tmnxDynSvcSapTableLastCh,
        tmnxDynSvcSapAcctAcctStatus,
        tmnxDynSvcSapAcctStatsType,
        tmnxDynSvcSapAcctAcctInterval,
        tmnxDynSvcPlcyApUpdateIvlJitter,
        tmnxDynSvcRootObjInstance,
        tmnxDynSvcRootObjOrphanTime,
        tmnxDynSvcRootObjSnippetName,
        tmnxDynSvcRootObjSnippetInstance,
        tmnxDynSvcRootObjTableLastCh,
        tmnxDynSvcNonStoredRootObjCount,
        tmnxDynSvcStatsDescr,
        tmnxDynSvcStatsVal,
        tmnxDynSvcSnippetRefCount,
        tmnxDynSvcSnippetDictLength,
        tmnxDynSvcSnippetRootObjOid,
        tmnxDynSvcSnippetRefSnipName,
        tmnxDynSvcSnippetRefSnipInst,
        tmnxDynSvcSnippetResIdType,
        tmnxDynSvcSnippetResIdValue,
        tmnxDynSvcSnippetTableLastCh,
        tmnxDynSvcSnipRootObjTblLastCh,
        tmnxDynSvcSnippetRefTableLastCh,
        tmnxDynSvcSnippetResIdTblLastCh,
        tmnxDynSvcTimerAccSetupTimeout,
        tmnxDynSvcStatsLastClearedTime
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects for the management of Dynamic Services on Nokia
         SROS series systems."
    ::= { tmnxDynSvcGroups 1 }

tmnxDynSvcV14v0Group             OBJECT-GROUP
    OBJECTS     {
        tmnxDynSvcPlcyRowStatus,
        tmnxDynSvcPlcyLastCh,
        tmnxDynSvcPlcyDescription,
        tmnxDynSvcPlcyScriptPlcy,
        tmnxDynSvcPlcyCliUser,
        tmnxDynSvcPlcySapLimit,
        tmnxDynSvcPlcyTableLastCh,
        tmnxDynSvcPlcyApLastCh,
        tmnxDynSvcPlcyApName,
        tmnxDynSvcPlcyApStatsType,
        tmnxDynSvcPlcyApUpdateInterval,
        tmnxDynSvcPlcyApTableLastCh,
        tmnxDynSvcRangeStart,
        tmnxDynSvcRangeEnd,
        tmnxDynSvcSapAcctSessionId,
        tmnxDynSvcSapAcctSessionIdCtrl,
        tmnxDynSvcSapPolicy,
        tmnxDynSvcSapScriptsExecuted,
        tmnxDynSvcSapScriptsSuccess,
        tmnxDynSvcSapLastScriptAction,
        tmnxDynSvcSapLastScriptTime,
        tmnxDynSvcSapService,
        tmnxDynSvcSapLastScriptParams,
        tmnxDynSvcSapTableLastCh,
        tmnxDynSvcSapAcctAcctStatus,
        tmnxDynSvcSapAcctStatsType,
        tmnxDynSvcSapAcctAcctInterval,
        tmnxDynSvcPlcyApUpdateIvlJitter,
        tmnxDynSvcRootObjInstance,
        tmnxDynSvcRootObjOrphanTime,
        tmnxDynSvcRootObjSnippetName,
        tmnxDynSvcRootObjSnippetInstance,
        tmnxDynSvcRootObjTableLastCh,
        tmnxDynSvcNonStoredRootObjCount,
        tmnxDynSvcStatsDescr,
        tmnxDynSvcStatsVal,
        tmnxDynSvcSnippetRefCount,
        tmnxDynSvcSnippetDictLength,
        tmnxDynSvcSnippetRootObjOid,
        tmnxDynSvcSnippetRefSnipName,
        tmnxDynSvcSnippetRefSnipInst,
        tmnxDynSvcSnippetResIdType,
        tmnxDynSvcSnippetResIdValue,
        tmnxDynSvcSnippetTableLastCh,
        tmnxDynSvcSnipRootObjTblLastCh,
        tmnxDynSvcSnippetRefTableLastCh,
        tmnxDynSvcSnippetResIdTblLastCh,
        tmnxDynSvcTimerAccSetupTimeout,
        tmnxDynSvcStatsLastClearedTime,
        tmnxDynSvcPlcyAuthLastCh,
        tmnxDynSvcPlcyAuthRadiusSrvPlcy,
        tmnxDynSvcPlcyAuthPassword,
        tmnxDynSvcPlcyAuthLocalDb,
        tmnxDynSvcPlcyAuthTableLastCh,
        tmnxDynSvcCaptureSapLastCh,
        tmnxDynSvcCaptureSapAdminState,
        tmnxDynSvcCaptureSapPolicy,
        tmnxDynSvcCaptureSapTableLastCh,
        tmnxDynSvcCSapStatsRxPackets,
        tmnxDynSvcCSapDropReason,
        tmnxDynSvcCSapDropCounter,
        tmnxDynSvcCSapStatsLastClearTime,
        tmnxDynSvcDataTriggerTableLastCh,
        tmnxDynSvcDTriggerAcctSessionId,
        tmnxDynSvcDTriggerMacAddress,
        tmnxDynSvcDTriggerIpAddressType,
        tmnxDynSvcDTriggerIpAddress,
        tmnxDynSvcDTriggerState,
        tmnxDynSvcLocADbTableLastCh,
        tmnxDynSvcLocADbUsrTableLastCh,
        tmnxDynSvcLocADbSapTableLastCh,
        tmnxDynSvcLocADbAcctTableLastCh,
        tmnxDynSvcLocAuthDbRowStatus,
        tmnxDynSvcLocAuthDbLastCh,
        tmnxDynSvcLocAuthDbAdminState,
        tmnxDynSvcLocAuthDbDescription,
        tmnxDynSvcLocADbUsrRowStatus,
        tmnxDynSvcLocADbUsrLastCh,
        tmnxDynSvcLocADbUsrAdminState,
        tmnxDynSvcLocADbUsrDescription,
        tmnxDynSvcLocADbSapRowStatus,
        tmnxDynSvcLocADbSapLastCh,
        tmnxDynSvcLocADbSapSapId,
        tmnxDynSvcLocADbSapPolicy,
        tmnxDynSvcLocADbSapScriptParams1,
        tmnxDynSvcLocADbSapScriptParams2,
        tmnxDynSvcLocADbSapScriptParams3,
        tmnxDynSvcLocADbSapScriptParams4,
        tmnxDynSvcLocADbAcctRowStatus,
        tmnxDynSvcLocADbAcctLastCh,
        tmnxDynSvcLocADbAcctStatsType,
        tmnxDynSvcLocADbAcctUpdateIvl
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for the management of Dynamic Services on Nokia
         SROS series systems in release 14.0."
    ::= { tmnxDynSvcGroups 2 }

tmnxDynSvcObsoletedGroup         OBJECT-GROUP
    OBJECTS     {
        tmnxDynSvcSapOrphaned
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects for the management of Dynamic Services
         on Nokia SROS series systems."
    ::= { tmnxDynSvcGroups 98 }

tmnxDynSvcNotifyObjsGroup        OBJECT-GROUP
    OBJECTS     {
        tmnxDynSvcNotifSapAcctSessionId,
        tmnxDynSvcNotifSapPortId,
        tmnxDynSvcNotifSapEncapValue,
        tmnxDynSvcNotifDescription
    }
    STATUS      current
    DESCRIPTION
        "The group of notification objects supporting Dynamic Services
         notifications on Nokia SROS series systems."
    ::= { tmnxDynSvcGroups 99 }

tmnxDynSvcNotifyGroup            NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxDynSvcSapFailed
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting Dynamic Services on Nokia SROS
         series systems."
    ::= { tmnxDynSvcGroups 100 }

tmnxDynSvcNotifyPrefix           OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 84 }

tmnxDynSvcNotifications          OBJECT IDENTIFIER ::= { tmnxDynSvcNotifyPrefix 0 }

tmnxDynSvcSapFailed              NOTIFICATION-TYPE
    OBJECTS     {
        tmnxDynSvcNotifSapAcctSessionId,
        tmnxDynSvcNotifSapPortId,
        tmnxDynSvcNotifSapEncapValue,
        tmnxDynSvcNotifDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxDynSvcSapFailed notification is sent when a Dynamic
         Services service SAP creation, modification or removal failed.

         [EFFECT] The desired new configuration is not in effect; the system
         has returned to the original configuration if possible.

         [RECOVERY] No recovery is necessary when the original configuration
         could be restored.

         If the SAP does not exist in the tmnxDynSvcSapTable at the time of
         this notification, the value 'invalid portid' is put in the object
         tmnxDynSvcNotifSapPortId."
    ::= { tmnxDynSvcNotifications 1 }

END