-- ============================================================================= -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: -- The file defines a MIB to provide WLAN configuration information. -- Reference: -- Version: V3.3 -- History: -- V1.0 2006-05-10 Initial version, created by shiyang (Richard) -- V1.1 2007-02-01 modified by xingjichen(Daniel) -- Added hpnicfDot11RadioIntfConfigTable,hpnicfDot11RadioIntfBindTable, -- hpnicfDot11StaKeepALiveTimerIntvl,hpnicfDot11StaIdleTimerIntvl, -- hpnicfDot11BroadcastProbeReply. -- V1.2 2007-04-27 modified by shiyang(Richard) -- Replace hpnicfDot11UnicastCipherKeyIndex, hpnicfDot11UnicastCipherKey, -- hpnicfDot11BroadcastCipherKeyIndex and hpnicfDot11BroadcastCipherKey -- with hpnicfDot11CipherKeyIndex, hpnicfDot11CipherKey as per CLI change. -- Delete hpnicfDot11MaxTxLifetime as per CLI change. -- Add hpnicfDot11GlobalCountryCode,hpnicfDot11APScanMode. -- hpnicfDot11ACCtrlTunnelSecSupport and hpnicfDot11ACDataTunnelSecSupport. -- Move hpnicfDot11StaKeepALiveTimerIntvl,hpnicfDot11StaIdleTimerIntvl -- and so on to hpnicfDot11GlobeConfigGroup. -- Split hpnicfDot11ServicePolicyTable into hpnicfDot11ServicePolicyTable -- and hpnicfDot11ServicePolicyExtTable. -- For hpnicfDot11SecurityCiphers node,update its description for case of -- value equals to zero. -- V1.3 2007-06-19 modified by Vikas K -- Add new table of hpnicfDot11DataRateConfigTable for AP Configuration -- Group. -- Add new node of hpnicfDot11APName for hpnicfDot11APTemplateTable. -- Modify the hpnicfDot11APScanMode from read-only to read-write. -- Add undo functionality to node hpnicfDot11WlanInfBindingID and -- hpnicfDot11Description. -- Add hpnicfDot11StatisInterv to the hpnicfDot11APTemplateTable. -- V1.4 2007-10-9 modified by Jagan K -- Add new table hpnicfDot11WlanBssIfTable for WLAN BSS interface -- configuration. -- Add new table hpnicfDot11WlanEssIfTable for WLAN ESS interface -- configuration. -- Add new table hpnicfDot11WlanEthernetIfTable for WLAN Ethernet interface -- configuration. -- V1.5 2007-12-21 modified by wanghao (Kumar) -- Add hpnicfDot11ACAutoAPSupport, hpnicfDot11AutoAPName, -- hpnicfDot11PersistentName to hpnicfDot11GlobeConfigGroup -- Add hpnicfDot11ClientMaxCount to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11APBroadcastProbeReply, hpnicfDot11StaIdleTimerInterv, -- hpnicfDot11StaKeepAliveTimerInterv, hpnicfDot11APCir, hpnicfDot11APCbs -- to hpnicfDot11APTemplateTable. -- V1.6 2008-02-25 modified by wanghao (Kumar) -- Add hpnicfDot11RdoClientMaxCount to hpnicfDot11RadioPolicyTable. -- V1.7 2008-04-01 modified by wangbin -- Add hpnicfDot11PortSecurityTable to hpnicfDot11InterfaceConfigGroup. -- Add hpnicfDot11PortSecurityMode, hpnicfDot11SecurityUserLoginTxKeyType, -- hpnicfDot11SecurityPskKeyMode, hpnicfDot11SecurityPskKeyString -- to hpnicfDot11PortSecurityTable. -- V1.8 2008-08-01 modified by ChangHuifeng -- Add hpnicfDot11ACBackupGroup and -- hpnicfDot11RadioElementConfigGroup. -- Add hpnicfDot11WlanMeshIfTable to hpnicfDot11InterfaceConfigGroup. -- Add hpnicfDot11APPriorityLevel and hpnicfDot11APElementID to -- hpnicfDot11APTemplateTable. -- Add hpnicfDot11CfgRdElementID to hpnicfDot11RadioToConfigTable. -- Add hpnicfDot11APDevDetectEnable to hpnicfDot11APTemplateEntry. -- Obsolete hpnicfDot11StatisInterv -- Change default value of hpnicfDot11APScanMode to passive. -- Change units of hpnicfDot11BeaconInterval and -- hpnicfDot11RadioCfgBeaconIntvl to TU. -- Remove default value of hpnicfDot11SSIDEncryptionMode. -- Change MAC-ACCESS of objects in hpnicfDot11RadioToConfigTable -- from read-create to read-write. -- Change name of hpnicfDot11IWlanEssRowStatus to hpnicfDot11WlanEssRowStatus. -- Change description of hpnicfDot11PortSecurityTable. -- V1.9 2008-11-07 modified by Wang Lu and Li Yugang -- Add hpnicfDot11IntfTrapThreshold to hpnicfDot11GlobeConfigGroup -- Add hpnicfDot11SPInCirMode, hpnicfDot11SPInCirValue, hpnicfDot11SPOutCirMode, -- hpnicfDot11SPOutCirValue to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11CfgWorkMode to hpnicfDot11RadioToConfigTable -- Add hpnicfDot11RadioCfgWorkMode to hpnicfDot11RadioIntfConfigTable. -- Add new traps hpnicfDot11CfgCipherChange and hpnicfDot11CfgPSKChange. -- Add hpnicfDot11MonitorInterval, hpnicfDot11SampleInterval, -- hpnicfDot11ChnlSwitChkInterval, hpnicfDot11APUserUplimit, -- hpnicfDot11APL2IsolateEnable to hpnicfDot11GlobeConfigGroup. -- Add hpnicfDot11RadioCfgOnly11gEnable to hpnicfDot11RadioIntfConfigTable. -- Add hpnicfDot11RadioWDSTable to hpnicfDot11RadioElementConfigGroup. -- V2.0 2009-03-20 modified by caizibin -- Add value ext(6) to hpnicfDot11PortSecurityMode -- V2.1 2009-05-07 modified by Li Yugang, Wang Shaojie, Jin Yi -- Add hpnicfDot11APBSSIDSupportNum, hpnicfDot11APLastUpdateStatTime, -- hpnicfDot11APDoSProtectEnable, hpnicfDot11MaxAPPerIf to -- hpnicfDot11GlobeConfigGroup. -- Add hpnicfDot11WlanInfPVID to hpnicfDot11ServicePolicyTable. -- Add hpnicfDot11CipherKeyType to hpnicfDot11ServicePolicyExtTable. -- Add hpnicfDot11CfgPwrAttValue to hpnicfDot11RadioToConfigTable. -- Add new table hpnicfDot11APSysInfoSetTable to hpnicfDot11APConfigGroup. -- Add hpnicfDot11SSIDWepIDConflictTrap to hpnicfDot11CfgNotifications. -- Add new table hpnicfDot11CfgTrapVarObjects to hpnicfDot11CfgNotifyGroup. -- V2.2 2009-07-29 modified by Heziqi -- Add new node hpnicfDot11ServiceSetVlanId for hpnicfDot11APServiceSetTable. -- Add hpnicfDot11UplinkTrackId to hpnicfDot11GlobeConfigGroup. -- Add hpnicfDot11APLimitTable. -- Change description of hpnicfDot11StaKeepALiveTimerIntvl. -- Add new node hpnicfDot11RadioTxArithmetic for HpnicfDot11RadioToConfigTable. -- V2.3 2009-07-29 modified by Jinyi -- Add new table hpnicfDot11APIfSetTable -- V2.4 2009-12-01 modified by Wang Shaojie -- Add new node hpnicfDot11APGetIPMethod for hpnicfDot11APTemplateTable. -- Add new group hpnicfDot11CfgTrapConfigGroup. -- Add new table hpnicfDot11CfgSwitchTrapTable to hpnicfDot11CfgTrapConfigGroup. -- Add new node hpnicfDot11BeaconIntervalMs to hpnicfDot11RadioPolicyTable. -- Add new node hpnicfDot11SPInCirStaticValue, hpnicfDot11SPOutCirStaticValue -- to hpnicfDot11ServicePolicyTable. -- Modify description of hpnicfDot11SecurityCiphers. -- Add new node hpnicfDot11StatisIntervMode to hpnicfDot11APTemplateTable. -- Modify SYNTAX of hpnicfDot11APWorkMode. -- Modify STATUS of hpnicfDot11StatisInterv. -- Add new node hpnicfDot11SmartRateSet to hpnicfDot11DataRateConfigTable. -- 2010-02-22 modified by Wang Chunsheng -- Add new node hpnicfDot11CfgChannelLockStat, hpnicfDot11CfgPowerLockStat, -- hpnicfDot11CfgLBRdGroupId, hpnicfDot11CfgRRMSDRdGroupId to hpnicfDot11RadioToConfigTable. -- 2010-03-15 modified by Wang Lu -- Add hpnicfDot11RtCollectSwitch, hpnicfDot11RglCollectIntvl, and -- hpnicfDot11RtCollectIntvl to hpnicfDot11GlobeConfigGroup -- Add hpnicfDot11SPIsolate to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11APServiceVlanTable, hpnicfDot11RadioConfigTable, -- hpnicfDot11RadioPolicyExtTable and hpnicfDot11RadioSSIDCfgTable -- Remove hpnicfDot11CfgTrapConfigGroup -- Add hpnicfDot11SrvPortSecurityTable -- 2010-06-01 Modified by Wang Shaojie, Yin Junjie -- Add hpnicfDot11RCApPowerLevel, hpnicfDot11RCDynamicChlState, -- hpnicfDot11RCDynamicPowerState to hpnicfDot11RadioConfigTable. -- Add hpnicfDot11APSerialIDTable -- Add hpnicfDot11APSTVlanTable -- 2010-07-08 Modified the index of hpnicfDot11APSysInfoSetTable by jinyi -- 2010-08-05 Modified by Yin Junjie -- Add new table hpnicfDot11SrvPolicyExtendTable -- Add hpnicfDot11SPEnable to hpnicfDot11SrvPolicyExtendTable -- 2010-09-02 Modified by Yin Junjie -- Add new node hpnicfDot11AdjIntfTrapThreshold -- to hpnicfDot11GlobeConfigGroup -- Add hpnicfDot11RCRadioStatus to hpnicfDot11RadioConfigTable -- V2.5 2010-09-25 Modified by Wu Xiaopeng -- Remove Size list of hpnicfDot11APName. -- V2.6 2011-05-23 Modified by Cui Kai -- Add new node hpnicfDot11WlanexAuthServerIP to hpnicfDot11ServicePolicyTable -- 2011-07-08 Modified by Niu Jian -- Change type of hpnicfDot11CfgSTNASPortID to OCTET STRING -- V2.7 2011-07-13 Modified by Yu Bo -- Add new node hpnicfDot11RCRadioRate to hpnicfDot11RadioConfigTable -- Add new node hpnicfDot11RCPwrAdjustStepLength to hpnicfDot11RadioConfigTable -- 2011-08-08 Modified by Xiao Min -- Add new table hpnicfDot11nRadioCfg2Table -- 2011-08-10 Modified by limingjin -- Add hpnicfDot11RadioCfgType2 to hpnicfDot11RadioIntfConfigTable -- Add hpnicfDot11RCRadioType2 to hpnicfDot11RadioConfigTable -- Add hpnicfDot11CfgRadioType2 to hpnicfDot11RadioToConfigTable -- V2.8 2011-09-28 Modified by zhanghu -- Add hpnicfDot11ApTrapEnabled to hpnicfDot11APTemplateTable -- Add hpnicfDot11AllAPMonitorMode to hpnicfDot11APTemplateTable -- Add hpnicfDot11SIDAPTemplateName, hpnicfDot11SIDModelAlias, hpnicfDot11SIDAPDescription, hpnicfDot11SIDRowStatus, -- hpnicfDot11SIDAPName, hpnicfDot11SIDStatisInterv, hpnicfDot11SIDAPBroadcastProbeReply, -- hpnicfDot11SIDAPStaIdleTimerInterv, hpnicfDot11SIDStaKeepAliveTimerInterv, -- hpnicfDot11SIDAPCir, hpnicfDot11SIDAPCbs, hpnicfDot11SIDAPPriorityLevel, -- hpnicfDot11SIDAPElementID, hpnicfDot11SIDAPDevDetectEnable, hpnicfDot11SIDAPStatisIntervMode -- to hpnicfDot11APSerialIDTable -- 2011-08-28 Modified by Wang Lu -- Add hpnicfDot11CfgSaEnable, hpnicfDot11CfgSaBand, hpnicfDot11CfgIDSEnable, -- hpnicfDot11CfgSaCltRtFFTData to hpnicfDot11RadioToConfigTable -- V2.9 2012-08-10 by Zhang Cong cong -- Add new node hpnicfDot11ConfigureAPMacAddress to hpnicfDot11CfgTrapVarObjects -- Add new object hpnicfDot11ConfigureAPMacAddress to hpnicfDot11SSIDWepIDConflictTrap -- V3.0 2013-04-15 by Shao Pengfei & Li Shihao -- Add new node hpnicfDot11GlobalApFmwUpdState to hpnicfDot11GlobeConfigGroup -- Add new node hpnicfDot11ApFmwUpdState to hpnicfDot11APTemplateTable -- Add new node hpnicfDot11SPBeaconMeasEnable to hpnicfDot11ServicePolicyTable -- Add new node hpnicfDot11SPBeaconMeasType to hpnicfDot11ServicePolicyTable -- Add new node hpnicfDot11SPBeaconMeasInterval to hpnicfDot11ServicePolicyTable -- V3.1 2013-08-30 by Xiao Mengmeng & Li Qian & Ji Chunyu & Liu Yawen -- Add hpnicfDot11AuthenModeCM to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11SecIEStatusCM to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11SecurityCiphersCM to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11SrvPolicyStatusCM to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11CfgSTNASID to hpnicfDot11APSTVlanTable -- Add hpnicfDot11RCPreambleLenCM to hpnicfDot11RadioConfigTable -- Add hpnicfDot11RCDynamicChlStateCM to hpnicfDot11RadioConfigTable -- Add hpnicfDot11RCRadioStatusCM to hpnicfDot11RadioConfigTable -- Add hpnicfDot11SIDAPWorkModeCM to hpnicfDot11APSerialIDTable -- Add hpnicfDot11nRadioCfg2AMpduEnableCM to hpnicfDot11nRadioCfg2Table -- Add hpnicfDot11nRadioCfg2ChannelBandCM to hpnicfDot11nRadioCfg2Table -- Add hpnicfDot11nRadioCfg2ShortGiEnableCM to hpnicfDot11nRadioCfg2Table -- 2013-12-24 Modified by Chen Guoxi -- Add mode80 to hpnicfDot11nChanelBand and hpnicfDot11nRadioCfg2ChannelBand -- Add new node hpnicfDot11nClientDot11acOnly to hpnicfDot11nRadioCfgTable -- Add new node hpnicfDot11nRadioCfg2ClientDot11acOnly to hpnicfDot11nRadioCfg2Table -- V3.2 2014-02-10 by Zhou Weichao -- Add hpnicfDot11ACNasIDCM to hpnicfDot11GlobeConfigGroup -- Add hpnicfDot11SSIDHiddenCM to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11SPIsolateCM to hpnicfDot11ServicePolicyTable -- Add hpnicfDot11RPBeaconIntervalCM to hpnicfDot11RadioPolicyExtTable -- Add hpnicfDot11StatisIntervModeCM to hpnicfDot11APTemplateTable -- Add hpnicfDot11APNasIDCM to hpnicfDot11APTemplateTable -- Add hpnicfDot11RCDynamicPowerStateCM to hpnicfDot11RadioConfigTable -- Add hpnicfDot11RCRadioRateCM to hpnicfDot11RadioConfigTable -- Add hpnicfDot11nRadioCfg2ClientDot11nOnlyCM to hpnicfDot11nRadioCfg2Table -- Modify hpnicfDot11WlanexAuthServerIP -- Add hpnicfDot11RadioCfgRssithresholdCM to hpnicfDot11RadioIntfConfigTable -- Add hpnicfDot11SrvPortSecurityModeCM to hpnicfDot11SrvPortSecurityTable -- V3.3 2014-5-14 Add by yubo -- Add hpnicfDot11RCRssiThresholdCM to hpnicfDot11RadioConfigTable -- ============================================================================= HPN-ICF-DOT11-CFG-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, RowStatus, DisplayString, DateAndTime, MacAddress FROM SNMPv2-TC ifIndex FROM RFC1213-MIB MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI InetAddress FROM INET-ADDRESS-MIB hpnicfDot11, HpnicfDot11RadioType, HpnicfDot11TxPwrLevelScopeType, HpnicfDot11ChannelScopeType, HpnicfDot11SSIDStringType, HpnicfDot11AuthenType, HpnicfDot11RadioScopeType, HpnicfDot11SSIDEncryptModeType, HpnicfDot11SecIEStatusType, HpnicfDot11PreambleType, HpnicfDot11ServicePolicyIDType, HpnicfDot11TunnelSecSchemType, HpnicfDot11RadioElementIndex, HpnicfDot11WorkMode, HpnicfDot11CirMode, hpnicfDot11APElementIndex, HpnicfDot11ObjectIDType, HpnicfDot11RadioType2, HpnicfDot11TruthValueCM FROM HPN-ICF-DOT11-REF-MIB; hpnicfDot11CFG MODULE-IDENTITY LAST-UPDATED "201009251800Z" -- Sep 25, 2010 at 18:00 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key." REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT DESCRIPTION "Modified to remove some issue." REVISION "201009021800Z" -- Sep 2, 2010 at 18:00 GMT DESCRIPTION "Modified to add new node." REVISION "200907291800Z" -- Jul 29, 2009 at 18:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200903201530Z" -- Mar 20, 2009 at 15:30 GMT DESCRIPTION "Modified to add new value for appointed node." REVISION "200811071530Z" -- Nov 07, 2008 at 15:30 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200807091800Z" -- July 09, 2008 at 18:00 GMT DESCRIPTION "Modified to add new groups." REVISION "200802251800Z" -- Feb 25, 2008 at 18:00 GMT DESCRIPTION "Modified to add new nodes." REVISION "200712211800Z" -- Dec 21, 2007 at 18:00 GMT DESCRIPTION "Modified to add new nodes." REVISION "200710091655Z" -- October 09, 2007 at 16:55 GMT DESCRIPTION "changed for new requirements" REVISION "200706191800Z" -- June 19, 2007 at 18:00 GMT DESCRIPTION "Modified to add new table." REVISION "200704272000Z" -- Apr 27, 2007 at 20:00 GMT DESCRIPTION "Modified to fix some issue." REVISION "200702012000Z" -- February 01, 2007 at 20:00 GMT DESCRIPTION "Modified to support fat AP." REVISION "200605101900Z" -- May 10, 2006 at 19:00 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hpnicfDot11 4 } -- ***************************************************************************** -- * Major sections -- ***************************************************************************** -- AP Configuration Group -- DEFINED AS "The group to provide the configuration information -- for APs. hpnicfDot11GlobeConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 1 } hpnicfDot11PolicyConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 2 } -- Policy Configuration Group has the following children: -- hpnicfDot11RadioPolicyTable ::= { hpnicfDot11PolicyConfigGroup 1 } -- hpnicfDot11ServicePolicyTable ::= { hpnicfDot11PolicyConfigGroup 2 } -- hpnicfDot11ServicePolicyExtTable ::= { hpnicfDot11PolicyConfigGroup 3 } -- hpnicfDot11RadioPolicyExtTable ::= { hpnicfDot11PolicyConfigGroup 4 } hpnicfDot11APConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 3 } -- AP Configuration Group has the following children: -- hpnicfDot11APTemplateTable ::= { hpnicfDot11APConfigGroup 1 } -- hpnicfDot11RadioToConfigTable ::= { hpnicfDot11APConfigGroup 2 } -- hpnicfDot11APServiceSetTable ::= { hpnicfDot11APConfigGroup 3 } -- hpnicfDot11APSysInfoSetTable ::= { hpnicfDot11APConfigGroup 4 } -- hpnicfDot11APLimitTable ::= { hpnicfDot11APConfigGroup 5 } -- hpnicfDot11APSerialIDTable ::= { hpnicfDot11APConfigGroup 10 } -- hpnicfDot11APSTVlanTable ::= { hpnicfDot11APConfigGroup 11 } hpnicfDot11RadioIntfConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 4 } -- Radio Interface Group has the following children: -- hpnicfDot11RadioIntfConfigTable ::= { hpnicfDot11RadioIntfConfigGroup 1 } -- hpnicfDot11RadioIntfBindTable ::= { hpnicfDot11RadioIntfConfigGroup 2 } hpnicfDot11DataRateConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 5 } -- Data Rate Config Group has the following children: -- hpnicfDot11DataRateConfigTable ::= { hpnicfDot11DataRateConfigGroup 1 } hpnicfDot11InterfaceConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 6 } -- Interface Config Group has the following children: -- hpnicfDot11WlanEssIfTable ::= { hpnicfDot11InterfaceConfigGroup 1 } -- hpnicfDot11WlanBssIfTable ::= { hpnicfDot11InterfaceConfigGroup 2 } -- hpnicfDot11WLANEthernetIfTable ::= { hpnicfDot11InterfaceConfigGroup 3 } -- hpnicfDot11PortSecurityTable ::= { hpnicfDot11InterfaceConfigGroup 4 } -- hpnicfDot11WlanMeshIfTable ::= { hpnicfDot11InterfaceConfigGroup 5 } hpnicfDot11ACBackupGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 7 } hpnicfDot11RadioElementConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 8 } -- Radio Element Config Group has the following children: -- hpnicfDot11nRadioCfgTable ::= { hpnicfDot11RadioElementConfigGroup 1 } -- hpnicfDot11RadioWDSTable ::= { hpnicfDot11RadioElementConfigGroup 2 } -- hpnicfDot11nRadioCfg2Table ::= { hpnicfDot11RadioElementConfigGroup 3 } hpnicfDot11CfgNotifyGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 9 } -- ***************************************************************************** -- * hpnicfDot11GlobeConfigGroup Definition -- ***************************************************************************** hpnicfDot11GlobalCountryCode OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the country code for wireless network." ::= { hpnicfDot11GlobeConfigGroup 1 } hpnicfDot11StaKeepALiveTimerIntvl OBJECT-TYPE SYNTAX Unsigned32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled." DEFVAL { 0 } ::= { hpnicfDot11GlobeConfigGroup 2 } hpnicfDot11StaIdleTimerIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle." ::= { hpnicfDot11GlobeConfigGroup 3 } hpnicfDot11BroadcastProbeReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled" DEFVAL { true } ::= { hpnicfDot11GlobeConfigGroup 4 } hpnicfDot11APScanMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the scanning mode for AP. The following values are supported: active - AP will actively do scan. passive - AP will passively do scan." DEFVAL { passive } ::= { hpnicfDot11GlobeConfigGroup 5 } hpnicfDot11ACCtrlTunnelSecSupport OBJECT-TYPE SYNTAX HpnicfDot11TunnelSecSchemType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents what security schemes are supported for CAPWAP Control tunnel." ::= { hpnicfDot11GlobeConfigGroup 6 } hpnicfDot11ACDataTunnelSecSupport OBJECT-TYPE SYNTAX HpnicfDot11TunnelSecSchemType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme." DEFVAL { cleartxt } ::= { hpnicfDot11GlobeConfigGroup 7 } hpnicfDot11ACAutoAPSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled" DEFVAL { false } ::= { hpnicfDot11GlobeConfigGroup 8 } hpnicfDot11AutoAPName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the name of auto AP that needs to be made persistent. When read the value from the node, NULL value be returned." ::= { hpnicfDot11GlobeConfigGroup 9 } hpnicfDot11PersistentName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned." ::= { hpnicfDot11GlobeConfigGroup 10 } hpnicfDot11IntfTrapThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent." ::= { hpnicfDot11GlobeConfigGroup 11 } hpnicfDot11MonitorInterval OBJECT-TYPE SYNTAX Unsigned32(0 | 5..15) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode." DEFVAL { 0 } ::= { hpnicfDot11GlobeConfigGroup 12 } hpnicfDot11SampleInterval OBJECT-TYPE SYNTAX Unsigned32(0 | 10..300) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the sampling interval. Default value 0 : The sampling functionality is disabled." DEFVAL { 0 } ::= { hpnicfDot11GlobeConfigGroup 13 } hpnicfDot11ChnlSwitChkInterval OBJECT-TYPE SYNTAX Unsigned32(8..180) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the checking interval of channel switch." DEFVAL { 8 } ::= { hpnicfDot11GlobeConfigGroup 14 } hpnicfDot11APUserUplimit OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the upper limit of user which has access to this AP." ::= { hpnicfDot11GlobeConfigGroup 15 } hpnicfDot11APL2IsolateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled." DEFVAL { false } ::= { hpnicfDot11GlobeConfigGroup 16 } hpnicfDot11APBSSIDSupportNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the max number of BSSID supported by Current AP." ::= { hpnicfDot11GlobeConfigGroup 17 } hpnicfDot11APLastUpdateStatTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents date and time update statistic information lately." ::= { hpnicfDot11GlobeConfigGroup 18 } hpnicfDot11APDoSProtectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled." DEFVAL { false } ::= { hpnicfDot11GlobeConfigGroup 19 } hpnicfDot11MaxAPPerIf OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents max AP number that can be connected to AC interface." ::= { hpnicfDot11GlobeConfigGroup 20 } hpnicfDot11SampleTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the start time of current sample period." ::= { hpnicfDot11GlobeConfigGroup 21 } hpnicfDot11UplinkTrackId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled." DEFVAL { 0 } ::= { hpnicfDot11GlobeConfigGroup 22 } hpnicfDot11RtCollectSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, hpnicfDot11RtCollectIntvl will take effect. Otherwise, hpnicfDot11RglCollectIntvl will take effect." DEFVAL { false } ::= { hpnicfDot11GlobeConfigGroup 23 } hpnicfDot11RglCollectIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents interval to regularly collect statistics from AC to AP." ::= { hpnicfDot11GlobeConfigGroup 24 } hpnicfDot11RtCollectIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents interval to collect real-time statistics from AC to AP." ::= { hpnicfDot11GlobeConfigGroup 25 } hpnicfDot11AllAPCpuUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU usage threshold for all AP." ::= { hpnicfDot11GlobeConfigGroup 26 } hpnicfDot11AllAPMemUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The memory usage threshold for all AP." ::= { hpnicfDot11GlobeConfigGroup 27 } hpnicfDot11AdjIntfTrapThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent." ::= { hpnicfDot11GlobeConfigGroup 28 } hpnicfDot11AllAPMonitorMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents what work mode for All AP. The following values are supported: normal, - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { hpnicfDot11GlobeConfigGroup 29 } hpnicfDot11GlobalApFmwUpdState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically." DEFVAL { enable } ::= { hpnicfDot11GlobeConfigGroup 30 } hpnicfDot11ACNasIDCM OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the NAS-ID of current AC." ::= { hpnicfDot11GlobeConfigGroup 31 } -- ***************************************************************************** -- * End of hpnicfDot11GlobeConfigGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioPolicyTable Definition -- ***************************************************************************** hpnicfDot11RadioPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP)." ::= { hpnicfDot11PolicyConfigGroup 1 } hpnicfDot11RadioPolicyEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each radio policy." INDEX { IMPLIED hpnicfDot11RadioPolicyName } ::= { hpnicfDot11RadioPolicyTable 1 } HpnicfDot11RadioPolicyEntry ::= SEQUENCE { hpnicfDot11RadioPolicyName OCTET STRING, hpnicfDot11BeaconInterval Integer32, hpnicfDot11DtimInterval Integer32, hpnicfDot11RtsThreshold Integer32, hpnicfDot11FragThreshold Integer32, hpnicfDot11ShortRetryThreshold Integer32, hpnicfDot11LongRetryThreshold Integer32, hpnicfDot11MaxRxLifetime Unsigned32, hpnicfDot11RdoPolicyRowStatus RowStatus, hpnicfDot11RdoClientMaxCount Integer32, hpnicfDot11BeaconIntervalMs Integer32 } hpnicfDot11RadioPolicyName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of radio policy." ::= { hpnicfDot11RadioPolicyEntry 1 } hpnicfDot11BeaconInterval OBJECT-TYPE SYNTAX Integer32 UNITS "TU" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for Beacon management frame." DEFVAL { 100 } ::= { hpnicfDot11RadioPolicyEntry 2 } hpnicfDot11DtimInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames." DEFVAL { 1 } ::= { hpnicfDot11RadioPolicyEntry 3 } hpnicfDot11RtsThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed." DEFVAL { 2346 } ::= { hpnicfDot11RadioPolicyEntry 4 } hpnicfDot11FragThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers." DEFVAL { 2346 } ::= { hpnicfDot11RadioPolicyEntry 5 } hpnicfDot11ShortRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RTSThreshold, which shall be made before a failure condition is indicated." DEFVAL { 7 } ::= { hpnicfDot11RadioPolicyEntry 6 } hpnicfDot11LongRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 4 } ::= { hpnicfDot11RadioPolicyEntry 7 } hpnicfDot11MaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the elapsed time. After the time specified by hpnicfDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated." DEFVAL { 2000 } ::= { hpnicfDot11RadioPolicyEntry 8 } hpnicfDot11RdoPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11RadioPolicyEntry 9 } hpnicfDot11RdoClientMaxCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Represent the maximum number of stations supported by this radio policy." ::= { hpnicfDot11RadioPolicyEntry 10 } hpnicfDot11BeaconIntervalMs OBJECT-TYPE SYNTAX Integer32 UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for Beacon management frame." ::= { hpnicfDot11RadioPolicyEntry 11 } -- ***************************************************************************** -- * End of hpnicfDot11RadioPolicyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11ServicePolicyTable Definition -- ***************************************************************************** hpnicfDot11ServicePolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11ServicePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP)." ::= { hpnicfDot11PolicyConfigGroup 2 } hpnicfDot11ServicePolicyEntry OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each service policy." INDEX { hpnicfDot11ServicePolicyID } ::= { hpnicfDot11ServicePolicyTable 1 } HpnicfDot11ServicePolicyEntry ::= SEQUENCE { hpnicfDot11ServicePolicyID HpnicfDot11ServicePolicyIDType, hpnicfDot11SSIDName HpnicfDot11SSIDStringType, hpnicfDot11SSIDHidden TruthValue, hpnicfDot11AuthenMode HpnicfDot11AuthenType, hpnicfDot11SSIDEncryptionMode HpnicfDot11SSIDEncryptModeType, hpnicfDot11WlanInfBindingType OCTET STRING, hpnicfDot11WlanInfBindingID Integer32, hpnicfDot11SrvPolicyRowStatus RowStatus, hpnicfDot11ClientMaxCount Integer32, hpnicfDot11SPInCirMode HpnicfDot11CirMode, hpnicfDot11SPInCirValue Integer32, hpnicfDot11SPOutCirMode HpnicfDot11CirMode, hpnicfDot11SPOutCirValue Integer32, hpnicfDot11WlanInfPVID Integer32, hpnicfDot11SPInCirStaticValue Integer32, hpnicfDot11SPOutCirStaticValue Integer32, hpnicfDot11SPIsolate TruthValue, hpnicfDot11WlanexAuthServerIP IpAddress, hpnicfDot11SPBeaconMeasEnable TruthValue, hpnicfDot11SPBeaconMeasType INTEGER, hpnicfDot11SPBeaconMeasInterval Integer32, hpnicfDot11AuthenModeCM INTEGER, hpnicfDot11SecIEStatusCM INTEGER, hpnicfDot11SecurityCiphersCM INTEGER, hpnicfDot11SrvPolicyStatusCM INTEGER, hpnicfDot11SSIDHiddenCM HpnicfDot11TruthValueCM, hpnicfDot11SPIsolateCM HpnicfDot11TruthValueCM } hpnicfDot11ServicePolicyID OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { hpnicfDot11ServicePolicyEntry 1 } hpnicfDot11SSIDName OBJECT-TYPE SYNTAX HpnicfDot11SSIDStringType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the ESS. As per CLI, the value of service policy name will be SSID." ::= { hpnicfDot11ServicePolicyEntry 2 } hpnicfDot11SSIDHidden OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame." DEFVAL { false } ::= { hpnicfDot11ServicePolicyEntry 3 } hpnicfDot11AuthenMode OBJECT-TYPE SYNTAX HpnicfDot11AuthenType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Authentication mode defined by 802.11." ::= { hpnicfDot11ServicePolicyEntry 4 } hpnicfDot11SSIDEncryptionMode OBJECT-TYPE SYNTAX HpnicfDot11SSIDEncryptModeType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the encryption mode for this ESS." ::= { hpnicfDot11ServicePolicyEntry 5 } hpnicfDot11WlanInfBindingType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the service policy will bind to what kind of data forwarding interface." DEFVAL { "WLAN-ESS" } ::= { hpnicfDot11ServicePolicyEntry 6 } hpnicfDot11WlanInfBindingID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed." ::= { hpnicfDot11ServicePolicyEntry 7 } hpnicfDot11SrvPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11ServicePolicyEntry 8 } hpnicfDot11ClientMaxCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Represent the maximum number of stations supported by this service policy." ::= { hpnicfDot11ServicePolicyEntry 9 } hpnicfDot11SPInCirMode OBJECT-TYPE SYNTAX HpnicfDot11CirMode MAX-ACCESS read-create STATUS current DESCRIPTION " CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset." DEFVAL { static } ::= { hpnicfDot11ServicePolicyEntry 10 } hpnicfDot11SPInCirValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless." DEFVAL { 0 } ::= { hpnicfDot11ServicePolicyEntry 11 } hpnicfDot11SPOutCirMode OBJECT-TYPE SYNTAX HpnicfDot11CirMode MAX-ACCESS read-create STATUS current DESCRIPTION " CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset." DEFVAL { static } ::= { hpnicfDot11ServicePolicyEntry 12 } hpnicfDot11SPOutCirValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless." DEFVAL { 0 } ::= { hpnicfDot11ServicePolicyEntry 13 } hpnicfDot11WlanInfPVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the VLAN ID of SSID." DEFVAL { 1 } ::= { hpnicfDot11ServicePolicyEntry 14 } hpnicfDot11SPInCirStaticValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of inbound direction for static CIR mode." DEFVAL { 0 } ::= { hpnicfDot11ServicePolicyEntry 15 } hpnicfDot11SPOutCirStaticValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of outbound direction for static CIR mode." DEFVAL { 0 } ::= { hpnicfDot11ServicePolicyEntry 16 } hpnicfDot11SPIsolate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If it is true, then stations connected with the service policy are isolated." DEFVAL { false } ::= { hpnicfDot11ServicePolicyEntry 17 } hpnicfDot11WlanexAuthServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the IP address of the Wlanex Authentication server" ::= { hpnicfDot11ServicePolicyEntry 18 } hpnicfDot11SPBeaconMeasEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If it is true, then beacon-measurement is enabled." DEFVAL { false } ::= { hpnicfDot11ServicePolicyEntry 19 } hpnicfDot11SPBeaconMeasType OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2), beaconTable(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMeasurement will use the active type. beaconTable - BeaconMeasurement will use the beacon table type." DEFVAL { beaconTable } ::= { hpnicfDot11ServicePolicyEntry 20 } hpnicfDot11SPBeaconMeasInterval OBJECT-TYPE SYNTAX Integer32(10..200) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the beacon-measurement interval." DEFVAL { 60 } ::= { hpnicfDot11ServicePolicyEntry 21 } hpnicfDot11AuthenModeCM OBJECT-TYPE SYNTAX INTEGER { opensystem(0), sharedkey(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Authentication mode defined by 802.11." ::= { hpnicfDot11ServicePolicyEntry 22 } hpnicfDot11SecIEStatusCM OBJECT-TYPE SYNTAX INTEGER { none(0), wpa(1), wpa2(2), wlanex(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "To enable the security Information element in the beacon and probe response frames sent by AP." ::= { hpnicfDot11ServicePolicyEntry 23 } hpnicfDot11SecurityCiphersCM OBJECT-TYPE SYNTAX INTEGER { none(0), wep40(1), wep104(2), tkip(3), aesccmp(4), wpisms4(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configuration or undo operation." ::= { hpnicfDot11ServicePolicyEntry 24 } hpnicfDot11SrvPolicyStatusCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the Service Policy." ::= { hpnicfDot11ServicePolicyEntry 25 } hpnicfDot11SSIDHiddenCM OBJECT-TYPE SYNTAX HpnicfDot11TruthValueCM MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames." DEFVAL { dot11false } ::= { hpnicfDot11ServicePolicyEntry 26 } hpnicfDot11SPIsolateCM OBJECT-TYPE SYNTAX HpnicfDot11TruthValueCM MAX-ACCESS read-create STATUS current DESCRIPTION "If it is dot11true, the clients connected with the service policy are isolated to each other." DEFVAL { dot11false } ::= { hpnicfDot11ServicePolicyEntry 27 } -- ***************************************************************************** -- * End of hpnicfDot11ServicePolicyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11ServicePolicyExtTable Definition -- ***************************************************************************** hpnicfDot11ServicePolicyExtTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11ServicePolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for ESS, as per service policy of CLI. When the value of hpnicfDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table." ::= { hpnicfDot11PolicyConfigGroup 3 } hpnicfDot11ServicePolicyExtEntry OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each service policy under cipher(2) mode." INDEX { hpnicfDot11ServicePolicyExtID } ::= { hpnicfDot11ServicePolicyExtTable 1 } HpnicfDot11ServicePolicyExtEntry ::= SEQUENCE { hpnicfDot11ServicePolicyExtID HpnicfDot11ServicePolicyIDType, hpnicfDot11SecIEStatus HpnicfDot11SecIEStatusType, hpnicfDot11SecurityCiphers Integer32, hpnicfDot11CipherKeyIndex Integer32, hpnicfDot11CipherKey OCTET STRING, hpnicfDot11SrvPolicyExtRowStatus RowStatus, hpnicfDot11CipherKeyType INTEGER } hpnicfDot11ServicePolicyExtID OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { hpnicfDot11ServicePolicyExtEntry 1 } hpnicfDot11SecIEStatus OBJECT-TYPE SYNTAX HpnicfDot11SecIEStatusType MAX-ACCESS read-create STATUS current DESCRIPTION "To enable the security Information element in the beacon and probe response frames sent by AP." ::= { hpnicfDot11ServicePolicyExtEntry 2 } hpnicfDot11SecurityCiphers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy, it could support multiple cipher types at the same time. So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation." ::= { hpnicfDot11ServicePolicyExtEntry 3 } hpnicfDot11CipherKeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the key index of cipher key for packet. When hpnicfDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective." DEFVAL { 1 } ::= { hpnicfDot11ServicePolicyExtEntry 4 } hpnicfDot11CipherKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cipher key for packet. When hpnicfDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective." ::= { hpnicfDot11ServicePolicyExtEntry 5 } hpnicfDot11SrvPolicyExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11ServicePolicyExtEntry 6 } hpnicfDot11CipherKeyType OBJECT-TYPE SYNTAX INTEGER { char(1), hex(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cipher key type of hpnicfDot11CipherKey." DEFVAL {1} ::= { hpnicfDot11ServicePolicyExtEntry 7 } -- ***************************************************************************** -- * End of hpnicfDot11ServicePolicyExtTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioPolicyExtTable Definition -- ***************************************************************************** hpnicfDot11RadioPolicyExtTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioPolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy." ::= { hpnicfDot11PolicyConfigGroup 4 } hpnicfDot11RadioPolicyExtEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioPolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each radio policy." INDEX { hpnicfDot11RPAPSerialID, hpnicfDot11RPRadioID } ::= { hpnicfDot11RadioPolicyExtTable 1 } HpnicfDot11RadioPolicyExtEntry ::= SEQUENCE { hpnicfDot11RPAPSerialID OCTET STRING, hpnicfDot11RPRadioID HpnicfDot11RadioScopeType, hpnicfDot11RPBeaconInterval Integer32, hpnicfDot11RPDtimInterval Integer32, hpnicfDot11RPRtsThreshold Integer32, hpnicfDot11RPFragThreshold Integer32, hpnicfDot11RPShortRetryThreshold Integer32, hpnicfDot11RPLongRetryThreshold Integer32, hpnicfDot11RPClientMaxCount Integer32, hpnicfDot11RPBeaconIntervalCM Integer32 } hpnicfDot11RPAPSerialID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Serial ID of AP." ::= { hpnicfDot11RadioPolicyExtEntry 1 } hpnicfDot11RPRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents each radio." ::= { hpnicfDot11RadioPolicyExtEntry 2 } hpnicfDot11RPBeaconInterval OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the interval for Beacon management frame." DEFVAL { 100 } ::= { hpnicfDot11RadioPolicyExtEntry 3 } hpnicfDot11RPDtimInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames." DEFVAL { 1 } ::= { hpnicfDot11RadioPolicyExtEntry 4 } hpnicfDot11RPRtsThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed." DEFVAL { 2346 } ::= { hpnicfDot11RadioPolicyExtEntry 5 } hpnicfDot11RPFragThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers." DEFVAL { 2346 } ::= { hpnicfDot11RadioPolicyExtEntry 6 } hpnicfDot11RPShortRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 7 } ::= { hpnicfDot11RadioPolicyExtEntry 7 } hpnicfDot11RPLongRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RTSThreshold, and that shall be made before a failure condition is indicated." DEFVAL { 4 } ::= { hpnicfDot11RadioPolicyExtEntry 8 } hpnicfDot11RPClientMaxCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of stations supported by this radio policy." ::= { hpnicfDot11RadioPolicyExtEntry 9 } hpnicfDot11RPBeaconIntervalCM OBJECT-TYPE SYNTAX Integer32 UNITS "timeunit" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents beacon interval." DEFVAL { 100 } ::= { hpnicfDot11RadioPolicyExtEntry 10 } -- ***************************************************************************** -- * End of hpnicfDot11RadioPolicyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11ServicePolicyPortSecurityTable Definition -- ***************************************************************************** hpnicfDot11SrvPortSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11SrvPortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hpnicfPortSecurityTables should be used to configure port security." ::= { hpnicfDot11PolicyConfigGroup 5 } hpnicfDot11SrvPortSecurityEntry OBJECT-TYPE SYNTAX HpnicfDot11SrvPortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in this table for service policy." INDEX { hpnicfDot11SecurityServicePolicyID } ::= { hpnicfDot11SrvPortSecurityTable 1 } HpnicfDot11SrvPortSecurityEntry ::= SEQUENCE { hpnicfDot11SecurityServicePolicyID HpnicfDot11ServicePolicyIDType, hpnicfDot11SrvPortSecurityMode INTEGER, hpnicfDot11SrvSecurityKeyType INTEGER, hpnicfDot11SrvSecurityPskKeyMode INTEGER, hpnicfDot11SrvSecurityPskKeyString DisplayString, hpnicfDot11SrvPortSecurityModeCM INTEGER } hpnicfDot11SecurityServicePolicyID OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { hpnicfDot11SrvPortSecurityEntry 1 } hpnicfDot11SrvPortSecurityMode OBJECT-TYPE SYNTAX INTEGER { noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. noRestrictions The default value, no any security mode is set. userLoginSecureExt Access to the port is denied until the port client is authorized (by 802.1X). psk Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext Access to the port is denied until the port client is authenticated (by ext)." ::= { hpnicfDot11SrvPortSecurityEntry 2 } hpnicfDot11SrvSecurityKeyType OBJECT-TYPE SYNTAX INTEGER { userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption." ::= { hpnicfDot11SrvPortSecurityEntry 3 } hpnicfDot11SrvSecurityPskKeyMode OBJECT-TYPE SYNTAX INTEGER { pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password input mode. When input as pskKeyModePassPhrase, hpnicfDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hpnicfDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'." ::= { hpnicfDot11SrvPortSecurityEntry 4 } hpnicfDot11SrvSecurityPskKeyString OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password string used for psk authentication." ::= { hpnicfDot11SrvPortSecurityEntry 5 } hpnicfDot11SrvPortSecurityModeCM OBJECT-TYPE SYNTAX INTEGER { none(0), psk(1), radius(2), wlanex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. none - The default value, no any security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). radius - Access to the port is denied until the port client is authorized (by 802.1X). wlanex - Access to the port is denied until the port client is authenticated by wlan cert." ::= { hpnicfDot11SrvPortSecurityEntry 6 } -- ***************************************************************************** -- * End of hpnicfDot11PortSecurityTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11SrvPolicyExtendTable Definition -- ***************************************************************************** hpnicfDot11SrvPolicyExtendTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11SrvPolicyExtendEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters of each service policy." ::= { hpnicfDot11PolicyConfigGroup 6 } hpnicfDot11SrvPolicyExtendEntry OBJECT-TYPE SYNTAX HpnicfDot11SrvPolicyExtendEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each service policy." INDEX { hpnicfDot11ServicePolicyID } ::= { hpnicfDot11SrvPolicyExtendTable 1 } HpnicfDot11SrvPolicyExtendEntry ::= SEQUENCE { hpnicfDot11SPEnable INTEGER } hpnicfDot11SPEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the service policy is enabled." ::= { hpnicfDot11SrvPolicyExtendEntry 1 } -- ***************************************************************************** -- * End of hpnicfDot11ServicePolicyExtendTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APTemplateTable Definition -- ***************************************************************************** hpnicfDot11APTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by hpnicfDot11APSerialID information in AP template." ::= { hpnicfDot11APConfigGroup 1 } hpnicfDot11APTemplateEntry OBJECT-TYPE SYNTAX HpnicfDot11APTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each AP." INDEX { hpnicfDot11APTemplateName } ::= { hpnicfDot11APTemplateTable 1 } HpnicfDot11APTemplateEntry ::= SEQUENCE { hpnicfDot11APTemplateName OCTET STRING, hpnicfDot11APSerialID OCTET STRING, hpnicfDot11TemplateAPModelAlias OCTET STRING, hpnicfDot11Description OCTET STRING, hpnicfDot11APWorkMode INTEGER, hpnicfDot11APTemplateRowStatus RowStatus, hpnicfDot11APName OCTET STRING, hpnicfDot11StatisInterv Integer32, hpnicfDot11APBroadcastProbeReply TruthValue, hpnicfDot11StaIdleTimerInterv Integer32, hpnicfDot11StaKeepAliveTimerInterv Integer32, hpnicfDot11APCir Integer32, hpnicfDot11APCbs Integer32, hpnicfDot11APPriorityLevel Integer32, hpnicfDot11APElementID Integer32, hpnicfDot11APDevDetectEnable TruthValue, hpnicfDot11APGetIPMethod INTEGER, hpnicfDot11StatisIntervMode INTEGER, hpnicfDot11ApTrapEnabled TruthValue, hpnicfDot11ApFmwUpdState INTEGER, hpnicfDot11StatisIntervModeCM INTEGER, hpnicfDot11ApNasIDCM OCTET STRING } hpnicfDot11APTemplateName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of AP template." ::= { hpnicfDot11APTemplateEntry 1 } hpnicfDot11APSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents AP serial id." ::= { hpnicfDot11APTemplateEntry 2 } hpnicfDot11TemplateAPModelAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the alias of AP model name." ::= { hpnicfDot11APTemplateEntry 3 } hpnicfDot11Description OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed." ::= { hpnicfDot11APTemplateEntry 4 } hpnicfDot11APWorkMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { hpnicfDot11APTemplateEntry 5 } hpnicfDot11APTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11APTemplateEntry 6 } hpnicfDot11APName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the AP name." ::= { hpnicfDot11APTemplateEntry 7 } hpnicfDot11StatisInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of radio statistic." ::= { hpnicfDot11APTemplateEntry 8 } hpnicfDot11APBroadcastProbeReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled" DEFVAL { true } ::= { hpnicfDot11APTemplateEntry 9 } hpnicfDot11StaIdleTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle." ::= { hpnicfDot11APTemplateEntry 10 } hpnicfDot11StaKeepAliveTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of the keep alive requests sent between AP and STA." ::= { hpnicfDot11APTemplateEntry 11 } hpnicfDot11APCir OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed information rate between AP and AC." ::= { hpnicfDot11APTemplateEntry 12 } hpnicfDot11APCbs OBJECT-TYPE SYNTAX Integer32 UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed burst size between AP and AC." ::= { hpnicfDot11APTemplateEntry 13 } hpnicfDot11APPriorityLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP." DEFVAL { 4 } ::= { hpnicfDot11APTemplateEntry 14 } hpnicfDot11APElementID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AP element ID." ::= { hpnicfDot11APTemplateEntry 15 } hpnicfDot11APDevDetectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hpnicfDot11APWorkMode is monitor, device detection can not be enabled with object hpnicfDot11APDevDetectEnable." DEFVAL { false } ::= { hpnicfDot11APTemplateEntry 16 } hpnicfDot11APGetIPMethod OBJECT-TYPE SYNTAX INTEGER { dhcpAlloc(1), static(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the method how AP gets IP address." DEFVAL { dhcpAlloc } ::= { hpnicfDot11APTemplateEntry 17 } hpnicfDot11StatisIntervMode OBJECT-TYPE SYNTAX INTEGER { normal(1), realtime(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s" DEFVAL { normal } ::= { hpnicfDot11APTemplateEntry 18 } hpnicfDot11ApTrapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status." DEFVAL { true } ::= { hpnicfDot11APTemplateEntry 19 } hpnicfDot11ApFmwUpdState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), inherit(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically. inherit - The status will inherit value from apgroup-view or system-view." DEFVAL { inherit } ::= { hpnicfDot11APTemplateEntry 20 } hpnicfDot11StatisIntervModeCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mode of statistic interval. off - statistic interval value between 10s to 120s on - statistic interval value between 2s to 5s" DEFVAL { off } ::= { hpnicfDot11APTemplateEntry 21 } hpnicfDot11ApNasIDCM OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the NAS-ID of current service policy for each specific radio of AP." ::= { hpnicfDot11APTemplateEntry 22 } -- ***************************************************************************** -- * End of hpnicfDot11APTemplateTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioToConfigTable Definition -- ***************************************************************************** hpnicfDot11RadioToConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioToConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Before AP connects to AC, administrator will configure radio parameter to each radio." ::= { hpnicfDot11APConfigGroup 2 } hpnicfDot11RadioToConfigEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioToConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each radio." INDEX { hpnicfDot11APTemplateNameCfg, hpnicfDot11CfgRadioID } ::= { hpnicfDot11RadioToConfigTable 1 } HpnicfDot11RadioToConfigEntry ::= SEQUENCE { hpnicfDot11APTemplateNameCfg OCTET STRING, hpnicfDot11CfgRadioID HpnicfDot11RadioScopeType, hpnicfDot11CfgRadioPolicyName OCTET STRING, hpnicfDot11CfgRadioType HpnicfDot11RadioType, hpnicfDot11CfgChannel HpnicfDot11ChannelScopeType, hpnicfDot11CfgMaxTxPowerLevel HpnicfDot11TxPwrLevelScopeType, hpnicfDot11PreambleLen HpnicfDot11PreambleType, hpnicfDot11CfgRadioStatus TruthValue, hpnicfDot11CfgRdElementID Unsigned32, hpnicfDot11CfgWorkMode HpnicfDot11WorkMode, hpnicfDot11CfgPwrAttValue Integer32, hpnicfDot11RadioTxArithmetic INTEGER, hpnicfDot11CfgChannelLockStat INTEGER, hpnicfDot11CfgPowerLockStat INTEGER, hpnicfDot11CfgLBRdGroupId Unsigned32, hpnicfDot11CfgRRMSDRdGroupId Unsigned32, hpnicfDot11CfgRadioType2 HpnicfDot11RadioType2, hpnicfDot11CfgIDSEnable TruthValue, hpnicfDot11CfgSaEnable TruthValue, hpnicfDot11CfgSaCltRtFFTData TruthValue, hpnicfDot11CfgSaBand INTEGER } hpnicfDot11APTemplateNameCfg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of AP template." ::= { hpnicfDot11RadioToConfigEntry 1 } hpnicfDot11CfgRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents each radio." ::= { hpnicfDot11RadioToConfigEntry 2 } hpnicfDot11CfgRadioPolicyName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the name of radio policy." ::= { hpnicfDot11RadioToConfigEntry 3 } hpnicfDot11CfgRadioType OBJECT-TYPE SYNTAX HpnicfDot11RadioType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { hpnicfDot11RadioToConfigEntry 4 } hpnicfDot11CfgChannel OBJECT-TYPE SYNTAX HpnicfDot11ChannelScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the channel allocation of radio." ::= { hpnicfDot11RadioToConfigEntry 5 } hpnicfDot11CfgMaxTxPowerLevel OBJECT-TYPE SYNTAX HpnicfDot11TxPwrLevelScopeType UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximal transmit power scope for AP." ::= { hpnicfDot11RadioToConfigEntry 6 } hpnicfDot11PreambleLen OBJECT-TYPE SYNTAX HpnicfDot11PreambleType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will be valid. Otherwise, the value for it will be invalid." DEFVAL { short } ::= { hpnicfDot11RadioToConfigEntry 7 } hpnicfDot11CfgRadioStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio admin status whether is enabled or disabled." ::= { hpnicfDot11RadioToConfigEntry 8 } hpnicfDot11CfgRdElementID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID." ::= { hpnicfDot11RadioToConfigEntry 9 } hpnicfDot11CfgWorkMode OBJECT-TYPE SYNTAX HpnicfDot11WorkMode MAX-ACCESS read-write STATUS current DESCRIPTION "Represents work mode of the radio." ::= { hpnicfDot11RadioToConfigEntry 10 } hpnicfDot11CfgPwrAttValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the value of power attenuation." ::= { hpnicfDot11RadioToConfigEntry 11 } hpnicfDot11RadioTxArithmetic OBJECT-TYPE SYNTAX INTEGER { quality(1), bandwidth(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the bandwidth first during the transmission." DEFVAL { quality } ::= { hpnicfDot11RadioToConfigEntry 12 } hpnicfDot11CfgChannelLockStat OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents locked status of channel on the radio." DEFVAL { unlocked } ::= { hpnicfDot11RadioToConfigEntry 13 } hpnicfDot11CfgPowerLockStat OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents locked status of power on the radio." DEFVAL { unlocked } ::= { hpnicfDot11RadioToConfigEntry 14 } hpnicfDot11CfgLBRdGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the load balance group ID allocated for the radio." ::= { hpnicfDot11RadioToConfigEntry 15 } hpnicfDot11CfgRRMSDRdGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the RRM self-decisive group ID allocated for the radio." ::= { hpnicfDot11RadioToConfigEntry 16 } hpnicfDot11CfgRadioType2 OBJECT-TYPE SYNTAX HpnicfDot11RadioType2 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { hpnicfDot11RadioToConfigEntry 17 } hpnicfDot11CfgIDSEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether intrusion detection is enabled for this radio." ::= { hpnicfDot11RadioToConfigEntry 18 } hpnicfDot11CfgSaEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether spectrum analysis is enabled." ::= { hpnicfDot11RadioToConfigEntry 19 } hpnicfDot11CfgSaCltRtFFTData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether to collect real-time FFT data for this radio." ::= { hpnicfDot11RadioToConfigEntry 20 } hpnicfDot11CfgSaBand OBJECT-TYPE SYNTAX INTEGER{ dot11g(1), dot11aLower(2), dot11aMiddle(3), dot11aUpper(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the following channels. dot11g (Channels 1-14) dot11aLower (channels 36-64) dot11aMiddle (channels 100-140) dot11aUpper (channels 149-165)." ::= { hpnicfDot11RadioToConfigEntry 21 } -- ***************************************************************************** -- * End of hpnicfDot11RadioToConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APServiceSetTable Definition -- ***************************************************************************** hpnicfDot11APServiceSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APServiceSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies." ::= { hpnicfDot11APConfigGroup 3 } hpnicfDot11APServiceSetEntry OBJECT-TYPE SYNTAX HpnicfDot11APServiceSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains service policy information for each specific radio of AP." INDEX { hpnicfDot11APTemplateNameCfg, hpnicfDot11CfgRadioID, hpnicfDot11CfgServicePolicyID } ::= { hpnicfDot11APServiceSetTable 1 } HpnicfDot11APServiceSetEntry ::= SEQUENCE { hpnicfDot11CfgServicePolicyID HpnicfDot11ServicePolicyIDType, hpnicfDot11SrvSetRowStatus RowStatus, hpnicfDot11ServiceSetVlanId Integer32 } hpnicfDot11CfgServicePolicyID OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy used by the AP." ::= { hpnicfDot11APServiceSetEntry 1 } hpnicfDot11SrvSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11APServiceSetEntry 2 } hpnicfDot11ServiceSetVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio." ::= { hpnicfDot11APServiceSetEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11APServiceSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APSTVlanTable Definition -- ***************************************************************************** hpnicfDot11APSTVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APSTVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies." ::= { hpnicfDot11APConfigGroup 11 } hpnicfDot11APSTVlanEntry OBJECT-TYPE SYNTAX HpnicfDot11APSTVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains VLAN and service policy information for each specific radio of AP." INDEX { hpnicfDot11SIDAPSerialID, hpnicfDot11CfgRadioID, hpnicfDot11CfgServicePolicyID } ::= { hpnicfDot11APSTVlanTable 1 } HpnicfDot11APSTVlanEntry ::= SEQUENCE { hpnicfDot11CfgSTVLANID Integer32, hpnicfDot11CfgSTNASPortID OCTET STRING, hpnicfDot11CfgServiceSetRowStatus RowStatus, hpnicfDot11CfgSTNASID OCTET STRING } hpnicfDot11CfgSTVLANID OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the VLAN that current Service Policy have bind to." ::= { hpnicfDot11APSTVlanEntry 1 } hpnicfDot11CfgSTNASPortID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the NAS Port ID of current Service Policy for each specific radio of AP." ::= { hpnicfDot11APSTVlanEntry 2 } hpnicfDot11CfgServiceSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11APSTVlanEntry 3 } hpnicfDot11CfgSTNASID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the NAS ID of current Service Policy for each specific radio of AP." ::= { hpnicfDot11APSTVlanEntry 4 } -- ***************************************************************************** -- * End of hpnicfDot11APSTVlanTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APSysInfoSetTable Definition -- ***************************************************************************** hpnicfDot11APSysInfoSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APSysInfoSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the system information for each AP." ::= { hpnicfDot11APConfigGroup 4 } hpnicfDot11APSysInfoSetEntry OBJECT-TYPE SYNTAX HpnicfDot11APSysInfoSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system information configuration for each AP." INDEX { hpnicfDot11SIDAPSerialID } ::= { hpnicfDot11APSysInfoSetTable 1 } HpnicfDot11APSysInfoSetEntry ::= SEQUENCE { hpnicfDot11APSysNetID OCTET STRING, hpnicfDot11APCpuUsageThreshold Integer32, hpnicfDot11APMemUsageThreshold Integer32 } hpnicfDot11APSysNetID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the system Net ID for AP." ::= { hpnicfDot11APSysInfoSetEntry 1 } hpnicfDot11APCpuUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU usage threshold for AP." ::= { hpnicfDot11APSysInfoSetEntry 2 } hpnicfDot11APMemUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The memory usage threshold for AP." ::= { hpnicfDot11APSysInfoSetEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11APSysInfoSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APLimitTable Definition -- ***************************************************************************** hpnicfDot11APLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s)." ::= { hpnicfDot11APConfigGroup 5 } hpnicfDot11APLimitEntry OBJECT-TYPE SYNTAX HpnicfDot11APLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the limit information for each AP." INDEX { hpnicfDot11APElementIndex } ::= { hpnicfDot11APLimitTable 1 } HpnicfDot11APLimitEntry ::= SEQUENCE { hpnicfDot11APSsidNumLimit Integer32, hpnicfDot11APUserCntLimit Integer32, hpnicfDot11APUserThreshold Integer32 } hpnicfDot11APSsidNumLimit OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP." DEFVAL { 0 } ::= { hpnicfDot11APLimitEntry 1 } hpnicfDot11APUserCntLimit OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP." DEFVAL { 0 } ::= { hpnicfDot11APLimitEntry 2 } hpnicfDot11APUserThreshold OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP." DEFVAL { 0 } ::= { hpnicfDot11APLimitEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11APLimitTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APIfSetTable Definition -- ***************************************************************************** hpnicfDot11APIfSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APIfSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the interface information for each AP." ::= { hpnicfDot11APConfigGroup 6 } hpnicfDot11APIfSetEntry OBJECT-TYPE SYNTAX HpnicfDot11APIfSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface information configuration for each AP." INDEX { hpnicfDot11APElementIndex, hpnicfDot11APSetIfIndex } ::= { hpnicfDot11APIfSetTable 1 } HpnicfDot11APIfSetEntry ::= SEQUENCE { hpnicfDot11APSetIfIndex Integer32, hpnicfDot11APIfAlias DisplayString } hpnicfDot11APSetIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the index for a interface." ::= { hpnicfDot11APIfSetEntry 1 } hpnicfDot11APIfAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object is an 'alias' name for the interface as specified by a network manager for AP." ::= { hpnicfDot11APIfSetEntry 2 } -- ***************************************************************************** -- * End of hpnicfDot11APIfSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11APServiceVlanTable Definition -- ***************************************************************************** hpnicfDot11APServiceVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APServiceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies." ::= { hpnicfDot11APConfigGroup 7 } hpnicfDot11APServiceVlanEntry OBJECT-TYPE SYNTAX HpnicfDot11APServiceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains service policy information for each AP." INDEX { hpnicfDot11APServiceVlanSerialID, hpnicfDot11APServiceVlanSPID } ::= { hpnicfDot11APServiceVlanTable 1 } HpnicfDot11APServiceVlanEntry ::= SEQUENCE { hpnicfDot11APServiceVlanSerialID OCTET STRING, hpnicfDot11APServiceVlanSPID HpnicfDot11ServicePolicyIDType, hpnicfDot11APServiceVlanId Integer32, hpnicfDot11APServiceVlanRowStatus RowStatus } hpnicfDot11APServiceVlanSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents AP serial id." ::= { hpnicfDot11APServiceVlanEntry 1 } hpnicfDot11APServiceVlanSPID OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the ID of each service policy used by the AP." ::= { hpnicfDot11APServiceVlanEntry 2 } hpnicfDot11APServiceVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio." ::= { hpnicfDot11APServiceVlanEntry 3 } hpnicfDot11APServiceVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the status of this table entry." ::= { hpnicfDot11APServiceVlanEntry 4 } -- ***************************************************************************** -- * End of hpnicfDot11APServiceSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioConfigTable Definition -- ***************************************************************************** hpnicfDot11RadioConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Before AP connects to AC, administrator will configure radio parameter to each radio." ::= { hpnicfDot11APConfigGroup 8 } hpnicfDot11RadioConfigEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each radio." INDEX { hpnicfDot11RCAPSerialID, hpnicfDot11RCRadioID } ::= { hpnicfDot11RadioConfigTable 1 } HpnicfDot11RadioConfigEntry ::= SEQUENCE { hpnicfDot11RCAPSerialID OCTET STRING, hpnicfDot11RCRadioID HpnicfDot11RadioScopeType, hpnicfDot11RCRadioType HpnicfDot11RadioType, hpnicfDot11RCChannel HpnicfDot11ChannelScopeType, hpnicfDot11RCPreambleLen HpnicfDot11PreambleType, hpnicfDot11RCPwrAttValue Integer32, hpnicfDot11RCApPowerLevel HpnicfDot11TxPwrLevelScopeType, hpnicfDot11RCDynamicChlState TruthValue, hpnicfDot11RCDynamicPowerState TruthValue, hpnicfDot11RCRadioStatus TruthValue, hpnicfDot11RCRadioRate OCTET STRING, hpnicfDot11RCPwrAdjustStepLength Integer32, hpnicfDot11RCRadioType2 HpnicfDot11RadioType2, hpnicfDot11RCPreambleLenCM INTEGER, hpnicfDot11RCDynamicChlStateCM INTEGER, hpnicfDot11RCRadioStatusCM INTEGER, hpnicfDot11RCRadioRateCM OCTET STRING, hpnicfDot11RCDynamicPowerStateCM HpnicfDot11TruthValueCM, hpnicfDot11RCRssiThresholdCM Integer32 } hpnicfDot11RCAPSerialID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Serial ID of AP." ::= { hpnicfDot11RadioConfigEntry 1 } hpnicfDot11RCRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents each radio." ::= { hpnicfDot11RadioConfigEntry 2 } hpnicfDot11RCRadioType OBJECT-TYPE SYNTAX HpnicfDot11RadioType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the radio will work with which 802.11 radio type." ::= { hpnicfDot11RadioConfigEntry 3 } hpnicfDot11RCChannel OBJECT-TYPE SYNTAX HpnicfDot11ChannelScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the channel allocation of radio." ::= { hpnicfDot11RadioConfigEntry 4 } hpnicfDot11RCPreambleLen OBJECT-TYPE SYNTAX HpnicfDot11PreambleType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will be valid. Otherwise, the value for it will be invalid." DEFVAL { short } ::= { hpnicfDot11RadioConfigEntry 5 } hpnicfDot11RCPwrAttValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the value of power attenuation." ::= { hpnicfDot11RadioConfigEntry 6 } hpnicfDot11RCApPowerLevel OBJECT-TYPE SYNTAX HpnicfDot11TxPwrLevelScopeType UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximal transmit power scope for AP." ::= { hpnicfDot11RadioConfigEntry 7 } hpnicfDot11RCDynamicChlState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic channel selection." ::= { hpnicfDot11RadioConfigEntry 8 } hpnicfDot11RCDynamicPowerState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic power selection for the band." ::= { hpnicfDot11RadioConfigEntry 9 } hpnicfDot11RCRadioStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio admin status whether is enabled or disabled." ::= { hpnicfDot11RadioConfigEntry 10 } hpnicfDot11RCRadioRate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, the first value will be treated as a mandatory rate, and the second value will be treated as a supported rate. If you configure more than two rates, the configuration cannot take effect. If you configure only one rate, it is considered as the mandatory rate by default.)" ::= { hpnicfDot11RadioConfigEntry 11 } hpnicfDot11RCPwrAdjustStepLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Power adjustment step-length in dBm." ::= { hpnicfDot11RadioConfigEntry 12 } hpnicfDot11RCRadioType2 OBJECT-TYPE SYNTAX HpnicfDot11RadioType2 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the radio will work with which 802.11 radio type." ::= { hpnicfDot11RadioConfigEntry 13 } hpnicfDot11RCPreambleLenCM OBJECT-TYPE SYNTAX INTEGER { long(0), short(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLenCM will be valid. Otherwise, the value for it will be invalid." DEFVAL { short } ::= { hpnicfDot11RadioConfigEntry 14 } hpnicfDot11RCDynamicChlStateCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic channel selection." ::= { hpnicfDot11RadioConfigEntry 15 } hpnicfDot11RCRadioStatusCM OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio admin status whether is enabled or disabled." ::= { hpnicfDot11RadioConfigEntry 16 } hpnicfDot11RCRadioRateCM OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: For 802.11n radios, the first value is mandatory rate, and the second value is supported rate. If more than two rate values are configured, the configuration will not take effect. If only one rate value is configured, the mandatory rate will be set to the default value.)" ::= { hpnicfDot11RadioConfigEntry 17 } hpnicfDot11RCDynamicPowerStateCM OBJECT-TYPE SYNTAX HpnicfDot11TruthValueCM MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable dynamic power selection for the band." ::= { hpnicfDot11RadioConfigEntry 18 } hpnicfDot11RCRssiThresholdCM OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate." DEFVAL { 1 } ::= { hpnicfDot11RadioConfigEntry 19 } -- ***************************************************************************** -- * End of hpnicfDot11RadioConfigTable Definition -- ***************************************************************************** hpnicfDot11RadioSSIDCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioSSIDCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies." ::= { hpnicfDot11APConfigGroup 9 } hpnicfDot11RadioSSIDCfgEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioSSIDCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains SSID configuration information for each radio." INDEX { hpnicfDot11RadioSSIDSerialID, hpnicfDot11RadioSSIDRadioID, hpnicfDot11RadioSSIDWLANID } ::= { hpnicfDot11RadioSSIDCfgTable 1 } HpnicfDot11RadioSSIDCfgEntry ::= SEQUENCE { hpnicfDot11RadioSSIDSerialID HpnicfDot11ObjectIDType, hpnicfDot11RadioSSIDRadioID HpnicfDot11RadioScopeType, hpnicfDot11RadioSSIDWLANID Integer32, hpnicfDot11RadioSSIDIndex HpnicfDot11ServicePolicyIDType, hpnicfDot11RadioBSSID MacAddress, hpnicfDot11RadioSSIDRowStatus RowStatus } hpnicfDot11RadioSSIDSerialID OBJECT-TYPE SYNTAX HpnicfDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the serial ID of AP." ::= { hpnicfDot11RadioSSIDCfgEntry 1 } hpnicfDot11RadioSSIDRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents each radio." ::= { hpnicfDot11RadioSSIDCfgEntry 2 } hpnicfDot11RadioSSIDWLANID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the WLAN ID of the BSSID." ::= { hpnicfDot11RadioSSIDCfgEntry 3 } hpnicfDot11RadioSSIDIndex OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the ID of each service policy used by the radio." ::= { hpnicfDot11RadioSSIDCfgEntry 4 } hpnicfDot11RadioBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "As MAC address format, it is used to identify BSS." ::= { hpnicfDot11RadioSSIDCfgEntry 5 } hpnicfDot11RadioSSIDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hpnicfDot11RadioSSIDCfgEntry 6 } -- ***************************************************************************** -- * hpnicfDot11APSerialIDTable Definition -- ***************************************************************************** hpnicfDot11APSerialIDTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APSerialIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table will provide the general information about APs." ::= { hpnicfDot11APConfigGroup 10 } hpnicfDot11APSerialIDEntry OBJECT-TYPE SYNTAX HpnicfDot11APSerialIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the general information of an AP." INDEX { hpnicfDot11SIDAPSerialID } ::= { hpnicfDot11APSerialIDTable 1 } HpnicfDot11APSerialIDEntry ::= SEQUENCE { hpnicfDot11SIDAPSerialID OCTET STRING, hpnicfDot11SIDAPWorkMode INTEGER, hpnicfDot11SIDAPGetIPMethod INTEGER, hpnicfDot11SIDAPTemplateName OCTET STRING, hpnicfDot11SIDModelAlias OCTET STRING, hpnicfDot11SIDAPDescription OCTET STRING, hpnicfDot11SIDRowStatus RowStatus, hpnicfDot11SIDAPName OCTET STRING, hpnicfDot11SIDStatisInterv Integer32, hpnicfDot11SIDAPBroadcastProbeReply TruthValue, hpnicfDot11SIDAPStaIdleTimerInterv Integer32, hpnicfDot11SIDStaKeepAliveTimerInterv Integer32, hpnicfDot11SIDAPCir Integer32, hpnicfDot11SIDAPCbs Integer32, hpnicfDot11SIDAPPriorityLevel Integer32, hpnicfDot11SIDAPElementID Integer32, hpnicfDot11SIDAPDevDetectEnable TruthValue, hpnicfDot11SIDAPStatisIntervMode INTEGER, hpnicfDot11SIDAPWorkModeCM INTEGER } hpnicfDot11SIDAPSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents AP serial id." ::= { hpnicfDot11APSerialIDEntry 1 } hpnicfDot11SIDAPWorkMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { hpnicfDot11APSerialIDEntry 2 } hpnicfDot11SIDAPGetIPMethod OBJECT-TYPE SYNTAX INTEGER { dhcpAlloc(1), static(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the method how AP gets IP address." DEFVAL { dhcpAlloc } ::= { hpnicfDot11APSerialIDEntry 3 } hpnicfDot11SIDAPTemplateName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the name of AP template." ::= { hpnicfDot11APSerialIDEntry 4 } hpnicfDot11SIDModelAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the alias of AP model name." ::= { hpnicfDot11APSerialIDEntry 5 } hpnicfDot11SIDAPDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed." ::= { hpnicfDot11APSerialIDEntry 6 } hpnicfDot11SIDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11APSerialIDEntry 7 } hpnicfDot11SIDAPName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the AP name." ::= { hpnicfDot11APSerialIDEntry 8 } hpnicfDot11SIDStatisInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of radio statistic." ::= { hpnicfDot11APSerialIDEntry 9 } hpnicfDot11SIDAPBroadcastProbeReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled" DEFVAL { true } ::= { hpnicfDot11APSerialIDEntry 10 } hpnicfDot11SIDAPStaIdleTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle." ::= { hpnicfDot11APSerialIDEntry 11 } hpnicfDot11SIDStaKeepAliveTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of the keep alive requests sent between AP and STA." ::= { hpnicfDot11APSerialIDEntry 12 } hpnicfDot11SIDAPCir OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed information rate between AP and AC." ::= { hpnicfDot11APSerialIDEntry 13 } hpnicfDot11SIDAPCbs OBJECT-TYPE SYNTAX Integer32 UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed burst size between AP and AC." ::= { hpnicfDot11APSerialIDEntry 14 } hpnicfDot11SIDAPPriorityLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP." DEFVAL { 4 } ::= { hpnicfDot11APSerialIDEntry 15 } hpnicfDot11SIDAPElementID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AP element ID." ::= { hpnicfDot11APSerialIDEntry 16 } hpnicfDot11SIDAPDevDetectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hpnicfDot11APWorkMode is monitor, device detection can not be enabled with object hpnicfDot11SIDAPDevDetectEnable." DEFVAL { false } ::= { hpnicfDot11APSerialIDEntry 17 } hpnicfDot11SIDAPStatisIntervMode OBJECT-TYPE SYNTAX INTEGER { normal(1), realtime(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s" DEFVAL { normal } ::= { hpnicfDot11APSerialIDEntry 18 } hpnicfDot11SIDAPWorkModeCM OBJECT-TYPE SYNTAX INTEGER { normal(0), monitor(1), semimonitor(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. SemiMonitor - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { hpnicfDot11APSerialIDEntry 19 } -- ***************************************************************************** -- * hpnicfDot11RadioIntfConfigTable Definition -- ***************************************************************************** hpnicfDot11RadioIntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for radio in AP, as per radio." ::= { hpnicfDot11RadioIntfConfigGroup 1 } hpnicfDot11RadioIntfConfigEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each radio in AP." INDEX { hpnicfDot11RadioIfIdx } ::= { hpnicfDot11RadioIntfConfigTable 1 } HpnicfDot11RadioIntfConfigEntry ::= SEQUENCE { hpnicfDot11RadioIfIdx Integer32, hpnicfDot11RadioCfgBeaconIntvl Integer32, hpnicfDot11RadioCfgDtimIntvl Integer32, hpnicfDot11RadioCfgRtsThreshold Integer32, hpnicfDot11RadioCfgFragThreshold Integer32, hpnicfDot11RadioCfgShtRetryThld Integer32, hpnicfDot11RadioCfglongRtrThld Integer32, hpnicfDot11RadioCfgMaxRxLifetime Unsigned32, hpnicfDot11RadioCfgType HpnicfDot11RadioType, hpnicfDot11RadioCfgChannel HpnicfDot11ChannelScopeType, hpnicfDot11RadioCfgMaxTxPwrLvl HpnicfDot11TxPwrLevelScopeType, hpnicfDot11RadioCfgPreambleLen HpnicfDot11PreambleType, hpnicfDot11RadioCfgWorkMode HpnicfDot11WorkMode, hpnicfDot11RadioCfgOnly11gEnable TruthValue, hpnicfDot11RadioCfgType2 HpnicfDot11RadioType2, hpnicfDot11RadioCfgRssithresholdCM Integer32 } hpnicfDot11RadioIfIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the Radio IfIndex of radio in AP." ::= { hpnicfDot11RadioIntfConfigEntry 1 } hpnicfDot11RadioCfgBeaconIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "TU" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval for Beacon management frame." DEFVAL { 100 } ::= { hpnicfDot11RadioIntfConfigEntry 2 } hpnicfDot11RadioCfgDtimIntvl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames." DEFVAL { 1 } ::= { hpnicfDot11RadioIntfConfigEntry 3 } hpnicfDot11RadioCfgRtsThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "Byte" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed." DEFVAL { 2346 } ::= { hpnicfDot11RadioIntfConfigEntry 4 } hpnicfDot11RadioCfgFragThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "Byte" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers." DEFVAL { 2346 } ::= { hpnicfDot11RadioIntfConfigEntry 5 } hpnicfDot11RadioCfgShtRetryThld OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RadioRTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 5 } ::= { hpnicfDot11RadioIntfConfigEntry 6 } hpnicfDot11RadioCfglongRtrThld OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RadioRTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 5 } ::= { hpnicfDot11RadioIntfConfigEntry 7 } hpnicfDot11RadioCfgMaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the elapsed time. After the time specified by hpnicfDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated." DEFVAL { 2000 } ::= { hpnicfDot11RadioIntfConfigEntry 8 } hpnicfDot11RadioCfgType OBJECT-TYPE SYNTAX HpnicfDot11RadioType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { hpnicfDot11RadioIntfConfigEntry 9 } hpnicfDot11RadioCfgChannel OBJECT-TYPE SYNTAX HpnicfDot11ChannelScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the channel allocation of radio." DEFVAL { 1 } ::= { hpnicfDot11RadioIntfConfigEntry 10 } hpnicfDot11RadioCfgMaxTxPwrLvl OBJECT-TYPE SYNTAX HpnicfDot11TxPwrLevelScopeType UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximal transmit power scope for AP." ::= { hpnicfDot11RadioIntfConfigEntry 11 } hpnicfDot11RadioCfgPreambleLen OBJECT-TYPE SYNTAX HpnicfDot11PreambleType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether use long or short preamble for 802.11 MAC frame." DEFVAL { short } ::= { hpnicfDot11RadioIntfConfigEntry 12 } hpnicfDot11RadioCfgWorkMode OBJECT-TYPE SYNTAX HpnicfDot11WorkMode MAX-ACCESS read-write STATUS current DESCRIPTION "Represents work mode of the radio." ::= { hpnicfDot11RadioIntfConfigEntry 13 } hpnicfDot11RadioCfgOnly11gEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled." DEFVAL { false } ::= { hpnicfDot11RadioIntfConfigEntry 14 } hpnicfDot11RadioCfgType2 OBJECT-TYPE SYNTAX HpnicfDot11RadioType2 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { hpnicfDot11RadioIntfConfigEntry 15 } hpnicfDot11RadioCfgRssithresholdCM OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate." DEFVAL { 1 } ::= { hpnicfDot11RadioIntfConfigEntry 16 } -- ***************************************************************************** -- * End of hpnicfDot11RadioIntfConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioIntfBindTable Definition -- ***************************************************************************** hpnicfDot11RadioIntfBindTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioIntfBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the binding information for each radio in AP. " ::= { hpnicfDot11RadioIntfConfigGroup 2 } hpnicfDot11RadioIntfBindEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioIntfBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the radio interface binding information in AP." INDEX { hpnicfDot11RadioIfIdx, hpnicfDot11RadioIntfBindSvcPlcyID } ::= { hpnicfDot11RadioIntfBindTable 1 } HpnicfDot11RadioIntfBindEntry ::= SEQUENCE { hpnicfDot11RadioIntfBindSvcPlcyID HpnicfDot11ServicePolicyIDType, hpnicfDot11RadioIntfBindIfIdx Unsigned32, hpnicfDot11RadioIntfBindRowStatus RowStatus } hpnicfDot11RadioIntfBindSvcPlcyID OBJECT-TYPE SYNTAX HpnicfDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { hpnicfDot11RadioIntfBindEntry 1 } hpnicfDot11RadioIntfBindIfIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Ifindex of interface which is binded to the radio." ::= { hpnicfDot11RadioIntfBindEntry 2 } hpnicfDot11RadioIntfBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11RadioIntfBindEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11RadioIntfBindTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11DataRateConfigTable Definition -- ***************************************************************************** hpnicfDot11DataRateConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11DataRateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table will provide data rate configuration for a specific radio type." ::= { hpnicfDot11DataRateConfigGroup 1 } hpnicfDot11DataRateConfigEntry OBJECT-TYPE SYNTAX HpnicfDot11DataRateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry of the table will provide data rate configuration for a specific radio type." INDEX { hpnicfDot11RadioTypeID } ::= { hpnicfDot11DataRateConfigTable 1 } HpnicfDot11DataRateConfigEntry ::= SEQUENCE { hpnicfDot11RadioTypeID HpnicfDot11RadioType, hpnicfDot11SupportedRateSet OCTET STRING, hpnicfDot11MandatoryRateSet OCTET STRING, hpnicfDot11DisabledRateSet OCTET STRING, hpnicfDot11SmartRateSet OCTET STRING } hpnicfDot11RadioTypeID OBJECT-TYPE SYNTAX HpnicfDot11RadioType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the radio type." ::= { hpnicfDot11DataRateConfigEntry 1 } hpnicfDot11SupportedRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the supported rate set of a particular radio type." ::= { hpnicfDot11DataRateConfigEntry 2 } hpnicfDot11MandatoryRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the mandatory rate set of a particular radio type." ::= { hpnicfDot11DataRateConfigEntry 3 } hpnicfDot11DisabledRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the disabled rate set of a particular radio type." ::= { hpnicfDot11DataRateConfigEntry 4 } hpnicfDot11SmartRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the rate set of a particular radio type." ::= { hpnicfDot11DataRateConfigEntry 5 } -- ***************************************************************************** -- * End of hpnicfDot11DataRateConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11WlanEssIfTable Definition -- ************************************************************************* hpnicfDot11WlanEssIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11WlanEssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN ESS interface." ::= { hpnicfDot11InterfaceConfigGroup 1 } hpnicfDot11WlanEssIfEntry OBJECT-TYPE SYNTAX HpnicfDot11WlanEssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN ESS interface configuration." INDEX { hpnicfDot11WlanEssIfNumber } ::= { hpnicfDot11WlanEssIfTable 1 } HpnicfDot11WlanEssIfEntry ::= SEQUENCE { hpnicfDot11WlanEssIfNumber Integer32, hpnicfDot11WlanEssIfIndex Integer32, hpnicfDot11WlanEssRowStatus RowStatus } hpnicfDot11WlanEssIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN ESS interface number." ::= { hpnicfDot11WlanEssIfEntry 1 } hpnicfDot11WlanEssIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the ifIndex of WLAN-ESS interface." ::= { hpnicfDot11WlanEssIfEntry 2 } hpnicfDot11WlanEssRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the WLAN ESS interface row status." ::= { hpnicfDot11WlanEssIfEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11WlanEssIfTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11WlanBssIfTable Definition -- ************************************************************************* hpnicfDot11WlanBssIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11WlanBssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN BSS interface." ::= { hpnicfDot11InterfaceConfigGroup 2 } hpnicfDot11WlanBssIfEntry OBJECT-TYPE SYNTAX HpnicfDot11WlanBssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN BSS interface configuration." INDEX { hpnicfDot11WlanBssIfNumber } ::= { hpnicfDot11WlanBssIfTable 1 } HpnicfDot11WlanBssIfEntry ::= SEQUENCE { hpnicfDot11WlanBssIfNumber Integer32, hpnicfDot11WlanBssIfIndex Integer32, hpnicfDot11WlanBssRowStatus RowStatus } hpnicfDot11WlanBssIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN BSS interface number." ::= { hpnicfDot11WlanBssIfEntry 1 } hpnicfDot11WlanBssIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the ifIndex of WLAN-BSS interface." ::= { hpnicfDot11WlanBssIfEntry 2 } hpnicfDot11WlanBssRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the WLAN BSS interface row status." ::= { hpnicfDot11WlanBssIfEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11WlanBssIfTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11WLANEthernetIfTable Definition -- ************************************************************************* hpnicfDot11WLANEthernetIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11WLANEthernetIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN Ethernet interface." ::= { hpnicfDot11InterfaceConfigGroup 3 } hpnicfDot11WLANEthernetIfEntry OBJECT-TYPE SYNTAX HpnicfDot11WLANEthernetIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN Ethernet interface configuration." INDEX { hpnicfDot11WlanEthernetIfNumber } ::= { hpnicfDot11WLANEthernetIfTable 1 } HpnicfDot11WLANEthernetIfEntry ::= SEQUENCE { hpnicfDot11WlanEthernetIfNumber Integer32, hpnicfDot11WLANEthernetIfIndex Integer32, hpnicfDot11WlanEthernetRowStatus RowStatus } hpnicfDot11WlanEthernetIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN Ethernet interface number." ::= { hpnicfDot11WLANEthernetIfEntry 1 } hpnicfDot11WLANEthernetIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the ifIndex of WLAN-Ethernet interface." ::= { hpnicfDot11WLANEthernetIfEntry 2 } hpnicfDot11WlanEthernetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the Wlan Ethernet interface row status." ::= { hpnicfDot11WLANEthernetIfEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11DataRateConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11PortSecurityTable Definition -- ***************************************************************************** hpnicfDot11PortSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11PortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hpnicfPortSecurityTables should be used to configure port security." ::= { hpnicfDot11InterfaceConfigGroup 4 } hpnicfDot11PortSecurityEntry OBJECT-TYPE SYNTAX HpnicfDot11PortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB." INDEX { ifIndex } ::= { hpnicfDot11PortSecurityTable 1 } HpnicfDot11PortSecurityEntry ::= SEQUENCE { hpnicfDot11PortSecurityMode INTEGER, hpnicfDot11SecurityUserLoginTxKeyType INTEGER, hpnicfDot11SecurityPskKeyMode INTEGER, hpnicfDot11SecurityPskKeyString DisplayString } hpnicfDot11PortSecurityMode OBJECT-TYPE SYNTAX INTEGER { noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. noRestrictions - The default value,no any security mode is set. userLoginSecureExt - Access to the port is denied until the port client is authorized (by 802.1X). psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk - The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk - This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext - Access to the port is denied until the port client is authenticated (by ext). " ::= { hpnicfDot11PortSecurityEntry 1 } hpnicfDot11SecurityUserLoginTxKeyType OBJECT-TYPE SYNTAX INTEGER { userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption." ::= { hpnicfDot11PortSecurityEntry 2 } hpnicfDot11SecurityPskKeyMode OBJECT-TYPE SYNTAX INTEGER { pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password input mode. When input as pskKeyModePassPhrase, hpnicfDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hpnicfDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'." ::= { hpnicfDot11PortSecurityEntry 3 } hpnicfDot11SecurityPskKeyString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password string used for psk authentication." ::= { hpnicfDot11PortSecurityEntry 4 } -- ***************************************************************************** -- * End of hpnicfDot11PortSecurityTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11WlanMeshIfTable Definition -- ************************************************************************* hpnicfDot11WlanMeshIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11WlanMeshIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN mesh interface." ::= { hpnicfDot11InterfaceConfigGroup 5 } hpnicfDot11WlanMeshIfEntry OBJECT-TYPE SYNTAX HpnicfDot11WlanMeshIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN mesh interface configuration." INDEX { hpnicfDot11WlanMeshIfNumber } ::= { hpnicfDot11WlanMeshIfTable 1 } HpnicfDot11WlanMeshIfEntry ::= SEQUENCE { hpnicfDot11WlanMeshIfNumber Integer32, hpnicfDot11WlanMeshIfIndex Integer32, hpnicfDot11WlanMeshRowStatus RowStatus } hpnicfDot11WlanMeshIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN mesh interface number." ::= { hpnicfDot11WlanMeshIfEntry 1 } hpnicfDot11WlanMeshIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the index of WLAN mesh interface." ::= { hpnicfDot11WlanMeshIfEntry 2 } hpnicfDot11WlanMeshRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the WLAN mesh interface row status." ::= { hpnicfDot11WlanMeshIfEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11WlanMeshIfTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11ACBackupGroup Definition -- ***************************************************************************** hpnicfDot11BackupACAdrssIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0." ::= { hpnicfDot11ACBackupGroup 1 } hpnicfDot11BackupACAdrssIPv6 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0." ::= { hpnicfDot11ACBackupGroup 2 } -- ***************************************************************************** -- * End of hpnicfDot11ACBackupGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioElementConfigGroup Definition -- ***************************************************************************** hpnicfDot11nRadioCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11nRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure dot11n on the radio." ::= { hpnicfDot11RadioElementConfigGroup 1 } hpnicfDot11nRadioCfgEntry OBJECT-TYPE SYNTAX HpnicfDot11nRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the dot11n configuration on the radio." INDEX { hpnicfDot11nRadioCfgIndex } ::= { hpnicfDot11nRadioCfgTable 1 } HpnicfDot11nRadioCfgEntry ::= SEQUENCE { hpnicfDot11nRadioCfgIndex HpnicfDot11RadioElementIndex, hpnicfDot11nAMpduEnable TruthValue, hpnicfDot11nAMsduEnable TruthValue, hpnicfDot11nClientDot11nOnly TruthValue, hpnicfDot11nChanelBand INTEGER, hpnicfDot11nShortGiEnable TruthValue, hpnicfDot11nClientDot11acOnly TruthValue } hpnicfDot11nRadioCfgIndex OBJECT-TYPE SYNTAX HpnicfDot11RadioElementIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the radio." ::= { hpnicfDot11nRadioCfgEntry 1 } hpnicfDot11nAMpduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MPDU." DEFVAL { true } ::= { hpnicfDot11nRadioCfgEntry 2 } hpnicfDot11nAMsduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MSDU." DEFVAL { true } ::= { hpnicfDot11nRadioCfgEntry 3 } hpnicfDot11nClientDot11nOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode." DEFVAL { false } ::= { hpnicfDot11nRadioCfgEntry 4 } hpnicfDot11nChanelBand OBJECT-TYPE SYNTAX INTEGER { mode20(1), mode40(2), mode80(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the bandwidth mode." DEFVAL { mode40 } ::= { hpnicfDot11nRadioCfgEntry 5 } hpnicfDot11nShortGiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The function of Short GI." DEFVAL { true } ::= { hpnicfDot11nRadioCfgEntry 6 } hpnicfDot11nClientDot11acOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Only permit clients of 11ac mode." DEFVAL { false } ::= { hpnicfDot11nRadioCfgEntry 7 } -- ***************************************************************************** -- * End of hpnicfDot11RadioElementConfigGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioWDSTable Definition -- ***************************************************************************** hpnicfDot11RadioWDSTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioWDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WDS on the radio." ::= { hpnicfDot11RadioElementConfigGroup 2 } hpnicfDot11RadioWDSEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioWDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WDS configuration on the radio." INDEX { hpnicfDot11RadioWDSIndex } ::= { hpnicfDot11RadioWDSTable 1 } HpnicfDot11RadioWDSEntry ::= SEQUENCE { hpnicfDot11RadioWDSIndex HpnicfDot11RadioElementIndex, hpnicfDot11RadioWDSMode INTEGER, hpnicfDot11RadioWDSNetWorkID OCTET STRING, hpnicfDot11WDSSecPskKeyMode INTEGER, hpnicfDot11WDSSecPskKeyString DisplayString } hpnicfDot11RadioWDSIndex OBJECT-TYPE SYNTAX HpnicfDot11RadioElementIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the element index of radio." ::= { hpnicfDot11RadioWDSEntry 1 } hpnicfDot11RadioWDSMode OBJECT-TYPE SYNTAX INTEGER { nowds(1), wds(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled" DEFVAL { nowds } ::= { hpnicfDot11RadioWDSEntry 2 } hpnicfDot11RadioWDSNetWorkID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the mesh ID of WDS." DEFVAL { "" } ::= { hpnicfDot11RadioWDSEntry 3 } hpnicfDot11WDSSecPskKeyMode OBJECT-TYPE SYNTAX INTEGER { pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the PSK mode of WDS." DEFVAL { pskKeyModeNone } ::= { hpnicfDot11RadioWDSEntry 4 } hpnicfDot11WDSSecPskKeyString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the PSK value of WDS." DEFVAL { "" } ::= { hpnicfDot11RadioWDSEntry 5 } -- ***************************************************************************** -- * End of hpnicfDot11RadioWDSTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11nRadioCfg2Table Definition -- ***************************************************************************** hpnicfDot11nRadioCfg2Table OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11nRadioCfg2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure dot11n on the radio." ::= { hpnicfDot11RadioElementConfigGroup 3 } hpnicfDot11nRadioCfg2Entry OBJECT-TYPE SYNTAX HpnicfDot11nRadioCfg2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the dot11n configuration on the radio." INDEX { hpnicfDot11nRadioCfg2APIDIndex, hpnicfDot11nRadioCfg2RadioIDIndex } ::= { hpnicfDot11nRadioCfg2Table 1 } HpnicfDot11nRadioCfg2Entry ::= SEQUENCE { hpnicfDot11nRadioCfg2APIDIndex HpnicfDot11ObjectIDType, hpnicfDot11nRadioCfg2RadioIDIndex HpnicfDot11RadioScopeType, hpnicfDot11nRadioCfg2AMpduEnable TruthValue, hpnicfDot11nRadioCfg2AMsduEnable TruthValue, hpnicfDot11nRadioCfg2ClientDot11nOnly TruthValue, hpnicfDot11nRadioCfg2ChannelBand INTEGER, hpnicfDot11nRadioCfg2ShortGiEnable TruthValue, hpnicfDot11nRadioCfg2AMpduEnableCM INTEGER, hpnicfDot11nRadioCfg2ChannelBandCM INTEGER, hpnicfDot11nRadioCfg2ShortGiEnableCM INTEGER, hpnicfDot11nRadioCfg2ClientDot11acOnly TruthValue, hpnicfDot11nRadioCfg2ClientDot11nOnlyCM HpnicfDot11TruthValueCM } hpnicfDot11nRadioCfg2APIDIndex OBJECT-TYPE SYNTAX HpnicfDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the AP." ::= { hpnicfDot11nRadioCfg2Entry 1 } hpnicfDot11nRadioCfg2RadioIDIndex OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the radio." ::= { hpnicfDot11nRadioCfg2Entry 2 } hpnicfDot11nRadioCfg2AMpduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MPDU." DEFVAL { true } ::= { hpnicfDot11nRadioCfg2Entry 3 } hpnicfDot11nRadioCfg2AMsduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MSDU." DEFVAL { true } ::= { hpnicfDot11nRadioCfg2Entry 4 } hpnicfDot11nRadioCfg2ClientDot11nOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode." DEFVAL { false } ::= { hpnicfDot11nRadioCfg2Entry 5 } hpnicfDot11nRadioCfg2ChannelBand OBJECT-TYPE SYNTAX INTEGER { mode20(1), mode40(2), mode80(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the bandwidth mode." ::= { hpnicfDot11nRadioCfg2Entry 6 } hpnicfDot11nRadioCfg2ShortGiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of Short GI." DEFVAL { true } ::= { hpnicfDot11nRadioCfg2Entry 7 } hpnicfDot11nRadioCfg2AMpduEnableCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MPDU." DEFVAL { on } ::= { hpnicfDot11nRadioCfg2Entry 8 } hpnicfDot11nRadioCfg2ChannelBandCM OBJECT-TYPE SYNTAX INTEGER { mode40(1), mode20(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the bandwidth mode." ::= { hpnicfDot11nRadioCfg2Entry 9 } hpnicfDot11nRadioCfg2ShortGiEnableCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of Short GI." DEFVAL { on } ::= { hpnicfDot11nRadioCfg2Entry 10 } hpnicfDot11nRadioCfg2ClientDot11acOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Only permit clients of 11ac mode." DEFVAL { false } ::= { hpnicfDot11nRadioCfg2Entry 11 } hpnicfDot11nRadioCfg2ClientDot11nOnlyCM OBJECT-TYPE SYNTAX HpnicfDot11TruthValueCM MAX-ACCESS read-write STATUS current DESCRIPTION "If radio type is 802.11an or 802.11gn, permit only clients of 11n mode. If radio type is 802.11ac, permit clients of both 11n and 11ac mode." DEFVAL { dot11false } ::= { hpnicfDot11nRadioCfg2Entry 12 } -- ***************************************************************************** -- * End of hpnicfDot11nRadioCfg2Table Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11CfgNotifyGroup Definition -- ***************************************************************************** hpnicfDot11CfgNotifications OBJECT IDENTIFIER ::= { hpnicfDot11CfgNotifyGroup 0 } hpnicfDot11CfgCipherChange NOTIFICATION-TYPE OBJECTS { hpnicfDot11SSIDName, hpnicfDot11SecurityCiphers } STATUS current DESCRIPTION "This notification is sent when cipher type of corresponding service template is changed." ::= { hpnicfDot11CfgNotifications 1 } hpnicfDot11CfgPSKChange NOTIFICATION-TYPE OBJECTS { hpnicfDot11SSIDName } STATUS current DESCRIPTION "This notification is sent when pre-shared key of corresponding service template is changed." ::= { hpnicfDot11CfgNotifications 2 } hpnicfDot11SSIDWepIDConflictTrap NOTIFICATION-TYPE OBJECTS { hpnicfDot11PreConflictTemplateNum, hpnicfDot11CurrConflictTemplateNum, hpnicfDot11ConflictCipherIdx, hpnicfDot11ConfigureAPID, hpnicfDot11ConfigureRadioID, hpnicfDot11ConfigureAPMacAddress } STATUS current DESCRIPTION "This notification will be sent when the same wep ID is configured on two service policies." ::= { hpnicfDot11CfgNotifications 3 } -- CFG Notification variable object hpnicfDot11CfgTrapVarObjects OBJECT IDENTIFIER ::= { hpnicfDot11CfgNotifyGroup 1 } hpnicfDot11PreConflictTemplateNum OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration." ::= { hpnicfDot11CfgTrapVarObjects 1 } hpnicfDot11CurrConflictTemplateNum OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration." ::= { hpnicfDot11CfgTrapVarObjects 2 } hpnicfDot11ConflictCipherIdx OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents wep ID that conflicted with." ::= { hpnicfDot11CfgTrapVarObjects 3 } hpnicfDot11ConfigureAPID OBJECT-TYPE SYNTAX HpnicfDot11ObjectIDType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents which AP is configured." ::= { hpnicfDot11CfgTrapVarObjects 4 } hpnicfDot11ConfigureRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents which radio in AP is configured." ::= { hpnicfDot11CfgTrapVarObjects 5 } hpnicfDot11ConfigureAPMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents MAC Address of AP." ::= { hpnicfDot11CfgTrapVarObjects 6 } -- ***************************************************************************** -- * End of hpnicfDot11CfgNotifyGroup Definition -- ***************************************************************************** END