HM2-PLATFORM-ROUTING-MIB DEFINITIONS ::= BEGIN -- -- *********************************************************** -- Hirschmann Platform Routing MIB -- *********************************************************** -- IMPORTS hm2PlatformMibs, HmEnabledStatus FROM HM2-TC-MIB ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressType, InetAddressIPv4 FROM INET-ADDRESS-MIB ospfIfEntry, ospfNbrEntry, ospfVirtIfEntry, ospfAreaEntry, ospfIfMetricEntry, RouterID FROM OSPF-MIB VlanId FROM Q-BRIDGE-MIB vrrpOperVrId FROM VRRP-MIB PhysAddress FROM RFC1213-MIB rip2IfConfEntry FROM RIPv2-MIB TimeTicks, Integer32, Gauge32, IpAddress, Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- -- Node definitions -- hm2PlatformRouting MODULE-IDENTITY LAST-UPDATED "201109080000Z" -- September 8, 2011 at 00:00 GMT (201109080000Z) ORGANIZATION "Hirschmann Automation and Control GmbH" CONTACT-INFO "Postal: Stuttgarter Str. 45-51 72654 Neckartenzlingen Germany Phone: +49 7127 140 E-mail: hac.support@belden.com" DESCRIPTION "The Hirschmann Platform2 MIB for Layer3 Switching. Copyright (C) 2011. All Rights Reserved." REVISION "201109080000Z" -- September 8, 2011 at 00:00 GMT (201109080000Z) DESCRIPTION "Initial version." ::= { hm2PlatformMibs 2 } -- -- hm2AgentSwitchArpGroup -- hm2AgentSwitchArpGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 1 } hm2AgentSwitchArpAgeoutTime OBJECT-TYPE SYNTAX Integer32 (15..21600) MAX-ACCESS read-write STATUS current DESCRIPTION "HiOS: Configures the exact ARP entry age-out time in seconds. HiSecOS: Configures the average ARP entry age-out time in seconds, with each entry aging out after a random time between 0.5*hm2AgentSwitchArpAgeoutTime and 1.5*hm2AgentSwitchArpAgeoutTime." DEFVAL { 1200 } ::= { hm2AgentSwitchArpGroup 1 } hm2AgentSwitchArpResponseTime OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the ARP request response timeout in seconds. Allowable range: 1-10" DEFVAL { 1 } ::= { hm2AgentSwitchArpGroup 2 } hm2AgentSwitchArpMaxRetries OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the ARP count of maximum request for retries. Allowable range: 0-10" DEFVAL { 4 } ::= { hm2AgentSwitchArpGroup 3 } hm2AgentSwitchArpCacheSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the ARP maximum number of entries in the cache. Allowable range is platform specific." ::= { hm2AgentSwitchArpGroup 4 } hm2AgentSwitchArpDynamicRenew OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the current setting of ARP dynamic renew mode." DEFVAL { disable } ::= { hm2AgentSwitchArpGroup 5 } hm2AgentSwitchArpTotalEntryCountCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries in the ARP cache." ::= { hm2AgentSwitchArpGroup 6 } hm2AgentSwitchArpTotalEntryCountPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed." ::= { hm2AgentSwitchArpGroup 7 } hm2AgentSwitchArpStaticEntryCountCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of configured static ARP entries." ::= { hm2AgentSwitchArpGroup 8 } hm2AgentSwitchArpStaticEntryCountMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of configurable static ARP entries." ::= { hm2AgentSwitchArpGroup 9 } hm2AgentSwitchLocalProxyArpTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchLocalProxyArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the per-interface configuration parameters for local proxy ARP." ::= { hm2AgentSwitchArpGroup 11 } hm2AgentSwitchLocalProxyArpEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchLocalProxyArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a logical row in the hm2AgentSwitchLocalProxyArpTable." INDEX { ifIndex } ::= { hm2AgentSwitchLocalProxyArpTable 1 } Hm2AgentSwitchLocalProxyArpEntry ::= SEQUENCE { hm2AgentSwitchLocalProxyArpMode INTEGER } hm2AgentSwitchLocalProxyArpMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The local proxy ARP mode for the interface." DEFVAL { disable } ::= { hm2AgentSwitchLocalProxyArpEntry 1 } hm2AgentSwitchIntfArpTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchIntfArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information." ::= { hm2AgentSwitchArpGroup 12 } hm2AgentSwitchIntfArpEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchIntfArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information." INDEX { hm2AgentSwitchIntfArpIpAddress, hm2AgentSwitchIntfArpIfIndex } ::= { hm2AgentSwitchIntfArpTable 1 } Hm2AgentSwitchIntfArpEntry ::= SEQUENCE { hm2AgentSwitchIntfArpIpAddress IpAddress, hm2AgentSwitchIntfArpIfIndex InterfaceIndex, hm2AgentSwitchIntfArpAge TimeTicks, hm2AgentSwitchIntfArpMacAddress PhysAddress, hm2AgentSwitchIntfArpType INTEGER, hm2AgentSwitchIntfArpStatus RowStatus } hm2AgentSwitchIntfArpIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Type of Address assigned to this interface." ::= { hm2AgentSwitchIntfArpEntry 1 } hm2AgentSwitchIntfArpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface" ::= { hm2AgentSwitchIntfArpEntry 2 } hm2AgentSwitchIntfArpAge OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging." ::= { hm2AgentSwitchIntfArpEntry 3 } hm2AgentSwitchIntfArpMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The hardware MAX Address that each interface maps to." ::= { hm2AgentSwitchIntfArpEntry 4 } hm2AgentSwitchIntfArpType OBJECT-TYPE SYNTAX INTEGER { local(1), gateway(2), static(3), dynamic(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of ARP entry." ::= { hm2AgentSwitchIntfArpEntry 5 } hm2AgentSwitchIntfArpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this ARP entry. Setting this object destroy will remove the entry." ::= { hm2AgentSwitchIntfArpEntry 6 } hm2AgentSwitchArpSparseLearn OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the current setting of ARP sparse learn mode. " DEFVAL { enable } ::= { hm2AgentSwitchArpGroup 100 } hm2AgentSwitchArpCacheClear OBJECT-TYPE SYNTAX INTEGER { other(1), flushARP(2), flushARPWithGateway(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushARP' will flush the ARP cache. Setting the object to 'flushARPWithGateway' will also flush the ARP cache but includes the ARP entries that are used by gateways of routes. Reading the object always returns 'other'." ::= { hm2AgentSwitchArpGroup 101 } hm2AgentSwitchProxyArpMaxResponseDelay OBJECT-TYPE SYNTAX Integer32 (0|1..1000) UNITS "milli-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the maximum time in ms to wait before a proxy response is sent. Setting this to 0 determines a response to be sent immediately." DEFVAL { 800 } ::= { hm2AgentSwitchArpGroup 248 } -- -- hm2AgentSwitchIpGroup -- hm2AgentSwitchIpGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 2 } hm2AgentSwitchIpRoutingMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enables/disables routing on the switch." DEFVAL { disable } ::= { hm2AgentSwitchIpGroup 1 } hm2AgentSwitchIpDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the default gateway manually configured." ::= { hm2AgentSwitchIpGroup 2 } hm2AgentSwitchIpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchIpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP interface table." ::= { hm2AgentSwitchIpGroup 3 } hm2AgentSwitchIpInterfaceEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchIpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP interface entry." INDEX { hm2AgentSwitchIpInterfaceIfIndex } ::= { hm2AgentSwitchIpInterfaceTable 1 } Hm2AgentSwitchIpInterfaceEntry ::= SEQUENCE { hm2AgentSwitchIpInterfaceIfIndex InterfaceIndex, hm2AgentSwitchIPAddressConfigMethod INTEGER, hm2AgentSwitchIpInterfaceIpAddress IpAddress, hm2AgentSwitchIpInterfaceNetMask IpAddress, hm2AgentSwitchIpInterfaceClearIp HmEnabledStatus, hm2AgentSwitchIpInterfaceRoutingMode HmEnabledStatus, hm2AgentSwitchIpInterfaceProxyARPMode HmEnabledStatus, hm2AgentSwitchIpInterfaceMtuValue Unsigned32, hm2AgentSwitchIpInterfaceBandwidth Unsigned32, hm2AgentSwitchIpInterfaceUnnumberedIfIndex InterfaceIndexOrZero, hm2AgentSwitchIpInterfaceIcmpUnreachables HmEnabledStatus, hm2AgentSwitchIpInterfaceIcmpRedirects HmEnabledStatus, hm2AgentSwitchDhcpOperation INTEGER, hm2AgentSwitchIpInterfaceSuppressed INTEGER, hm2AgentSwitchIpInterfaceNumberOfFlaps Unsigned32, hm2AgentSwitchIpInterfaceCurrentPenalty Unsigned32, hm2AgentSwitchIpInterfaceReUseTime Unsigned32, hm2AgentSwitchIpInterfaceNetdirectedBCMode HmEnabledStatus } hm2AgentSwitchIpInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex associated with this instance." ::= { hm2AgentSwitchIpInterfaceEntry 1 } hm2AgentSwitchIPAddressConfigMethod OBJECT-TYPE SYNTAX INTEGER { none(0), manual(1), dhcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of the IP address. User can set the object to none(0) or dhcp(2). Option dhcp(2) enables DHCP client on the interface. Option none(0) disables DHCP client on the interface. Get on this object returns manual(1) only when the interface has a manually configured address." ::= { hm2AgentSwitchIpInterfaceEntry 2 } hm2AgentSwitchIpInterfaceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address assigned to this interface. When setting this value, the value of hm2AgentSwitchIpInterfaceNetMask must be set at the same time." ::= { hm2AgentSwitchIpInterfaceEntry 3 } hm2AgentSwitchIpInterfaceNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The netmask assigned to this interface. When setting this value, the value of hm2AgentSwitchIpInterfaceIpAddress must be set at the same time." ::= { hm2AgentSwitchIpInterfaceEntry 4 } hm2AgentSwitchIpInterfaceClearIp OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When setting this object to 'enable(1)' the interfaces IP address and netmask will be set back to 0.0.0.0. Reading this object always returns 'disable(2)." ::= { hm2AgentSwitchIpInterfaceEntry 5 } hm2AgentSwitchIpInterfaceRoutingMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables routing for this interface." DEFVAL { disable } ::= { hm2AgentSwitchIpInterfaceEntry 6 } hm2AgentSwitchIpInterfaceProxyARPMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables proxy ARP for this interface." DEFVAL { disable } ::= { hm2AgentSwitchIpInterfaceEntry 7 } hm2AgentSwitchIpInterfaceMtuValue OBJECT-TYPE SYNTAX Unsigned32 (0 | 68..12266) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the MTU value for this interface. The applicable range is 68 to the , in bytes. Get of this object returns the effective MTU value on the interface. Set of this object with a value of 0 resets the MTU to the default IP MTU value on the interface. If a packet is received where the size exceeds the mtu value, an icmp destination unreachable message is sent back to the sender with the current mtu." ::= { hm2AgentSwitchIpInterfaceEntry 8 } hm2AgentSwitchIpInterfaceBandwidth OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the bandwidth value for this interface. If the returned value is 0, bandwidth for this interface is not configured." ::= { hm2AgentSwitchIpInterfaceEntry 9 } hm2AgentSwitchIpInterfaceUnnumberedIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If this object is non-zero, it indicates that the interface is unnumbered and specifies which interface the address is borrowed from." ::= { hm2AgentSwitchIpInterfaceEntry 10 } hm2AgentSwitchIpInterfaceIcmpUnreachables OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is enabled, it indicates that ICMP unreachables can be sent on this interface." DEFVAL { enable } ::= { hm2AgentSwitchIpInterfaceEntry 11 } hm2AgentSwitchIpInterfaceIcmpRedirects OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is enabled and hm2AgentSwitchIpIcmpRedirectsMode is also enabled, ICMP redirects can be sent on this interface." DEFVAL { enable } ::= { hm2AgentSwitchIpInterfaceEntry 12 } hm2AgentSwitchDhcpOperation OBJECT-TYPE SYNTAX INTEGER { renew(1), release(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Renew or release the IP address learned through DHCP. Get on this object always gives none. None means no operation is performed on DHCP." ::= { hm2AgentSwitchIpInterfaceEntry 13 } hm2AgentSwitchIpInterfaceSuppressed OBJECT-TYPE SYNTAX INTEGER { unsuppressed(0), suppressed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION " This mib variable contains the following values, which has the meaning as: 'unsuppressed' - The interface is not suppressed 'suppressed' - The interface is suppressed " ::= { hm2AgentSwitchIpInterfaceEntry 14 } hm2AgentSwitchIpInterfaceNumberOfFlaps OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This mib variable displays the number of flaps occurred on the interface" ::= { hm2AgentSwitchIpInterfaceEntry 15 } hm2AgentSwitchIpInterfaceCurrentPenalty OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "This mib variable displays the current penalty of an interface" ::= { hm2AgentSwitchIpInterfaceEntry 16 } hm2AgentSwitchIpInterfaceReUseTime OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This mib variable displays the number of seconds until the interface is allowed to come up " ::= { hm2AgentSwitchIpInterfaceEntry 17 } hm2AgentSwitchIpInterfaceNetdirectedBCMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables netdirected broadcasts for this interface." DEFVAL { disable } ::= { hm2AgentSwitchIpInterfaceEntry 248 } hm2AgentSwitchIpRouterDiscoveryTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchIpRouterDiscoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is no global administrative flag for router discovery. The global routing flag (hm2AgentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well." ::= { hm2AgentSwitchIpGroup 4 } hm2AgentSwitchIpRouterDiscoveryEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchIpRouterDiscoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { hm2AgentSwitchIpRouterDiscoveryIfIndex } ::= { hm2AgentSwitchIpRouterDiscoveryTable 1 } Hm2AgentSwitchIpRouterDiscoveryEntry ::= SEQUENCE { hm2AgentSwitchIpRouterDiscoveryIfIndex Integer32, hm2AgentSwitchIpRouterDiscoveryAdvertiseMode INTEGER, hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval Integer32, hm2AgentSwitchIpRouterDiscoveryMinAdvertisementInterval Integer32, hm2AgentSwitchIpRouterDiscoveryAdvertisementLifetime Integer32, hm2AgentSwitchIpRouterDiscoveryPreferenceLevel Integer32, hm2AgentSwitchIpRouterDiscoveryAdvertisementAddress IpAddress } hm2AgentSwitchIpRouterDiscoveryIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Number to configure Router Discovery on." ::= { hm2AgentSwitchIpRouterDiscoveryEntry 1 } hm2AgentSwitchIpRouterDiscoveryAdvertiseMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable router discovery on the interface." DEFVAL { disable } ::= { hm2AgentSwitchIpRouterDiscoveryEntry 2 } hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time allowed between sending router advertisements from the interface." DEFVAL { 600 } ::= { hm2AgentSwitchIpRouterDiscoveryEntry 3 } hm2AgentSwitchIpRouterDiscoveryMinAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (3..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval." DEFVAL { 450 } ::= { hm2AgentSwitchIpRouterDiscoveryEntry 4 } hm2AgentSwitchIpRouterDiscoveryAdvertisementLifetime OBJECT-TYPE SYNTAX Integer32 (4..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval." DEFVAL { 1800 } ::= { hm2AgentSwitchIpRouterDiscoveryEntry 5 } hm2AgentSwitchIpRouterDiscoveryPreferenceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference." DEFVAL { 0 } ::= { hm2AgentSwitchIpRouterDiscoveryEntry 6 } hm2AgentSwitchIpRouterDiscoveryAdvertisementAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Address used when sending router advertisements from the interface." DEFVAL { 'E0000001'h } ::= { hm2AgentSwitchIpRouterDiscoveryEntry 7 } hm2AgentSwitchIpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchIpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A static VLAN for which routing can be enabled/disabled." ::= { hm2AgentSwitchIpGroup 5 } hm2AgentSwitchIpVlanEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchIpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A static VLAN for which routing can be enabled/disabled." INDEX { hm2AgentSwitchIpVlanId } ::= { hm2AgentSwitchIpVlanTable 1 } Hm2AgentSwitchIpVlanEntry ::= SEQUENCE { hm2AgentSwitchIpVlanId VlanId, hm2AgentSwitchIpVlanIfIndex InterfaceIndex, hm2AgentSwitchIpVlanRoutingStatus RowStatus } hm2AgentSwitchIpVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN's ID." ::= { hm2AgentSwitchIpVlanEntry 1 } hm2AgentSwitchIpVlanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The IfIndex associated with this VLAN." ::= { hm2AgentSwitchIpVlanEntry 2 } hm2AgentSwitchIpVlanRoutingStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of Routing mode per VLAN. active(1) - VLAN is enabled for routing createAndGo(4) - Adds VLAN entry for routing createAndWait(5) - Adds VLAN entry for routing destroy(6) - Removes VLAN from routing" ::= { hm2AgentSwitchIpVlanEntry 3 } hm2AgentSwitchSecondaryAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchSecondaryAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains a list of secondary IP addresses associated with an interface." ::= { hm2AgentSwitchIpGroup 6 } hm2AgentSwitchSecondaryAddressEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchSecondaryAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A secondary IP address for a given interface. This IP address must not conflict with the IP address configured in the hm2AgentSwitchIpInterfaceTable." INDEX { hm2AgentSwitchIpInterfaceIfIndex, hm2AgentSwitchSecondaryIpAddress } ::= { hm2AgentSwitchSecondaryAddressTable 1 } Hm2AgentSwitchSecondaryAddressEntry ::= SEQUENCE { hm2AgentSwitchSecondaryIpAddress IpAddress, hm2AgentSwitchSecondaryNetMask IpAddress, hm2AgentSwitchSecondaryStatus RowStatus } hm2AgentSwitchSecondaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The secondary IP address assigned to this interface." ::= { hm2AgentSwitchSecondaryAddressEntry 1 } hm2AgentSwitchSecondaryNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The secondary netmask assigned to this interface. This value must be set during creation and can not be changed." ::= { hm2AgentSwitchSecondaryAddressEntry 2 } hm2AgentSwitchSecondaryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the secondary address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The hm2AgentSwitchSecondaryNetMask object must be set during creation. destroy(6) - Removes the associated address from the interface." ::= { hm2AgentSwitchSecondaryAddressEntry 3 } -- -- hm2AgentSwitchIpIcmpControlGroup -- hm2AgentSwitchIpIcmpControlGroup OBJECT IDENTIFIER ::= { hm2AgentSwitchIpGroup 8 } hm2AgentSwitchIpIcmpEchoReplyMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the administrative Echo Reply Mode." DEFVAL { enable } ::= { hm2AgentSwitchIpIcmpControlGroup 1 } hm2AgentSwitchIpIcmpRedirectsMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the administrative Mode for sending Redirects. " DEFVAL { enable } ::= { hm2AgentSwitchIpIcmpControlGroup 2 } hm2AgentSwitchIpIcmpRateLimitInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "milli-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "HiOS: Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. HiSecOS: Specifies the average minimum time between subsequent ICMP packets for each destination, using a token bucket algorithm. In times without ICMP packets, the tokens accumulate to allow for bursts of up to hm2AgentSwitchIpIcmpRateLimitBurstSize packets." DEFVAL { 1000 } ::= { hm2AgentSwitchIpIcmpControlGroup 3 } hm2AgentSwitchIpIcmpRateLimitBurstSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "HiOS: Specifies the number of tokens to be placed after timeout. HiSecOS: The size of the token bucket, fixed at 6 tokens." DEFVAL { 100 } ::= { hm2AgentSwitchIpIcmpControlGroup 4 } hm2AgentSwitchIntfIpHelperAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchIntfIpHelperAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains a list of IP helper addresses associated with an interface." ::= { hm2AgentSwitchIpGroup 10 } hm2AgentSwitchIpFirstActiveAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of hm2AgentSwitchIpFirstActiveAddress." ::= { hm2AgentSwitchIpGroup 248 } hm2AgentSwitchIpFirstActiveAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest ip address of any active routing interface." ::= { hm2AgentSwitchIpGroup 249 } hm2AgentSwitchIpStaticDefaultPref OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The default preference for static routes." DEFVAL { 1 } ::= { hm2AgentSwitchIpGroup 250 } hm2AgentSwitchIpRouteCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of routes configured on the switch." ::= { hm2AgentSwitchIpGroup 251 } hm2AgentSwitchIpBestRouteCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of best routes active on the switch." ::= { hm2AgentSwitchIpGroup 252 } hm2AgentSwitchIpSourceRoutingMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enables/disables source routing on the switch." DEFVAL { disable } ::= { hm2AgentSwitchIpGroup 253 } hm2AgentSwitchIntfIpHelperAddressEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchIntfIpHelperAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP helper address for a given interface." INDEX { hm2AgentSwitchIpInterfaceIfIndex, hm2AgentSwitchIntfIpHelperUdpPort, hm2AgentSwitchIntfIpHelperIpAddress } ::= { hm2AgentSwitchIntfIpHelperAddressTable 1 } Hm2AgentSwitchIntfIpHelperAddressEntry ::= SEQUENCE { hm2AgentSwitchIntfIpHelperUdpPort Unsigned32, hm2AgentSwitchIntfIpHelperIpAddress IpAddress, hm2AgentSwitchIntfIpHelperHitCount Unsigned32, hm2AgentSwitchIntfIpHelperStatus RowStatus } hm2AgentSwitchIntfIpHelperUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "UDP port number. Received packets with this destination UDP port number are forwarded to the helper address in this entry. A relay entry with port 0 allows dhcp, time, winnameserver, tacacs, dns, tftp, netbios-ns and netbios-dgm relay." ::= { hm2AgentSwitchIntfIpHelperAddressEntry 1 } hm2AgentSwitchIntfIpHelperIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP helper address for packets received on this interface. An address of 0.0.0.0 identifies the entry as a discard entry. Packets that match a discard entry are dropped." ::= { hm2AgentSwitchIntfIpHelperAddressEntry 2 } hm2AgentSwitchIntfIpHelperHitCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a packet has been forwarded or discarded according to this entry." ::= { hm2AgentSwitchIntfIpHelperAddressEntry 4 } hm2AgentSwitchIntfIpHelperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry." ::= { hm2AgentSwitchIntfIpHelperAddressEntry 5 } hm2AgentSwitchClearIpDefaultGateway OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Resets the Global Default Gateway address." ::= { hm2AgentSwitchIpGroup 11 } -- -- hm2AgentRouterRipConfigGroup -- hm2AgentRouterRipConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 3 } hm2AgentRouterRipAdminState OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the administrative mode of RIP in the router." DEFVAL { disable } ::= { hm2AgentRouterRipConfigGroup 1 } hm2AgentRouterRipSplitHorizonMode OBJECT-TYPE SYNTAX INTEGER { none(1), simple(2), poisonReverse(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2)." DEFVAL { simple } ::= { hm2AgentRouterRipConfigGroup 2 } hm2AgentRouterRipAutoSummaryMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is enable(1)." DEFVAL { enable } ::= { hm2AgentRouterRipConfigGroup 3 } hm2AgentRouterRipHostRoutesAcceptMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1)." DEFVAL { enable } ::= { hm2AgentRouterRipConfigGroup 4 } --************************************************************************************ hm2AgentRouterRipDefaultMetric OBJECT-TYPE SYNTAX Integer32 (0|1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default metric of redistributed routes, when RIP redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15)." DEFVAL { 0 } ::= { hm2AgentRouterRipConfigGroup 5 } hm2AgentRouterRipDefaultMetricConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether RIP default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed." DEFVAL { false } ::= { hm2AgentRouterRipConfigGroup 6 } hm2AgentRouterRipDefaultInfoOriginate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine, whether RIP can advertise a default-route learned from another protocol." DEFVAL { false } ::= { hm2AgentRouterRipConfigGroup 7 } -- Agent RIP Route-redistribution table. This table contains, one entry per -- source(bgp, ospf, static, connected) from which BGP redistributes routes. hm2AgentRipRouteRedistTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentRipRouteRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected." ::= { hm2AgentRouterRipConfigGroup 8 } hm2AgentRipRouteRedistEntry OBJECT-TYPE SYNTAX Hm2AgentRipRouteRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries of the table." INDEX { hm2AgentRipRouteRedistSource } ::= { hm2AgentRipRouteRedistTable 1 } Hm2AgentRipRouteRedistEntry ::= SEQUENCE { hm2AgentRipRouteRedistSource INTEGER, hm2AgentRipRouteRedistMode INTEGER, hm2AgentRipRouteRedistMetric Integer32, hm2AgentRipRouteRedistMetricConfigured TruthValue, hm2AgentRipRouteRedistMatchInternal INTEGER, hm2AgentRipRouteRedistMatchExternal1 INTEGER, hm2AgentRipRouteRedistMatchExternal2 INTEGER, hm2AgentRipRouteRedistMatchNSSAExternal1 INTEGER, hm2AgentRipRouteRedistMatchNSSAExternal2 INTEGER, hm2AgentRipRouteRedistDistList Unsigned32, hm2AgentRipRouteRedistDistListConfigured TruthValue } hm2AgentRipRouteRedistSource OBJECT-TYPE SYNTAX INTEGER { connected(1), static(2), ospf(3), bgp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry." ::= { hm2AgentRipRouteRedistEntry 1 } hm2AgentRipRouteRedistMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "User enabels/disables route-redistribution for a particular source protocol." DEFVAL { disable } ::= { hm2AgentRipRouteRedistEntry 2 } hm2AgentRipRouteRedistMetric OBJECT-TYPE SYNTAX Integer32 (0|1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Metric used for redistributing a particular source protocol route into RIP. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15)." DEFVAL { 0 } ::= { hm2AgentRipRouteRedistEntry 3 } hm2AgentRipRouteRedistMetricConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether RIP redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed." DEFVAL { false } ::= { hm2AgentRipRouteRedistEntry 4 } hm2AgentRipRouteRedistMatchInternal OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), not-applicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf." ::= { hm2AgentRipRouteRedistEntry 5 } hm2AgentRipRouteRedistMatchExternal1 OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), not-applicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf." ::= { hm2AgentRipRouteRedistEntry 6 } hm2AgentRipRouteRedistMatchExternal2 OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), not-applicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf." ::= { hm2AgentRipRouteRedistEntry 7 } hm2AgentRipRouteRedistMatchNSSAExternal1 OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), not-applicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf." ::= { hm2AgentRipRouteRedistEntry 8 } hm2AgentRipRouteRedistMatchNSSAExternal2 OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), not-applicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf." ::= { hm2AgentRipRouteRedistEntry 9 } hm2AgentRipRouteRedistDistList OBJECT-TYPE SYNTAX Unsigned32 (0|1000..1099) MAX-ACCESS read-write STATUS current DESCRIPTION "Access-list number of the access-list, which filters routes received from a source-protocol." ::= { hm2AgentRipRouteRedistEntry 10 } hm2AgentRipRouteRedistDistListConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether Access-list is configured or not." ::= { hm2AgentRipRouteRedistEntry 11 } -- The RIP Interface Configuration Table (augmented information). hm2AgentRip2IfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentRip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB." ::= { hm2AgentRouterRipConfigGroup 9 } hm2AgentRip2IfConfEntry OBJECT-TYPE SYNTAX Hm2AgentRip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB." AUGMENTS { rip2IfConfEntry } ::= { hm2AgentRip2IfConfTable 1 } Hm2AgentRip2IfConfEntry ::= SEQUENCE { hm2AgentRip2IfConfAuthKeyId Integer32 } hm2AgentRip2IfConfAuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used." ::= { hm2AgentRip2IfConfEntry 1 } hm2AgentRouterRipRoutePref OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The route preference, sometimes called administrative distance, for RIP routes. A route with a preference of 255 is considered unreachable." DEFVAL { 120 } ::= { hm2AgentRouterRipConfigGroup 10 } hm2AgentRouterRipUpdateTimerInterval OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the RIP update timer interval in the router. This is the time in seconds between two full routing table update packets." DEFVAL { 30 } ::= { hm2AgentRouterRipConfigGroup 248 } -- -- hm2AgentRouterOspfConfigGroup -- hm2AgentRouterOspfConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 4 } hm2AgentOspfDefaultMetric OBJECT-TYPE SYNTAX Integer32 (0 | 1..16777214) MAX-ACCESS read-write STATUS current DESCRIPTION "Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..16777214)." DEFVAL { 0 } ::= { hm2AgentRouterOspfConfigGroup 1 } hm2AgentOspfDefaultMetricConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed." DEFVAL { false } ::= { hm2AgentRouterOspfConfigGroup 2 } hm2AgentOspfDefaultInfoOriginate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine, whether OSPF can advertise a default-route learned from another protocol." DEFVAL { false } ::= { hm2AgentRouterOspfConfigGroup 3 } hm2AgentOspfDefaultInfoOriginateAlways OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route." DEFVAL { false } ::= { hm2AgentRouterOspfConfigGroup 4 } hm2AgentOspfDefaultInfoOriginateMetric OBJECT-TYPE SYNTAX Integer32 (0 | 1..16777214) MAX-ACCESS read-write STATUS current DESCRIPTION "Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..16777214)." DEFVAL { 0 } ::= { hm2AgentRouterOspfConfigGroup 5 } hm2AgentOspfDefaultInfoOriginateMetricConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is not allowed." ::= { hm2AgentRouterOspfConfigGroup 6 } hm2AgentOspfDefaultInfoOriginateMetricType OBJECT-TYPE SYNTAX INTEGER { externalType1(1), externalType2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2)." DEFVAL { 2 } ::= { hm2AgentRouterOspfConfigGroup 7 } hm2AgentOspfRouteRedistTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfRouteRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected." ::= { hm2AgentRouterOspfConfigGroup 8 } hm2AgentOspfRouteRedistEntry OBJECT-TYPE SYNTAX Hm2AgentOspfRouteRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries of the table." INDEX { hm2AgentOspfRouteRedistSource } ::= { hm2AgentOspfRouteRedistTable 1 } Hm2AgentOspfRouteRedistEntry ::= SEQUENCE { hm2AgentOspfRouteRedistSource INTEGER, hm2AgentOspfRouteRedistMode INTEGER, hm2AgentOspfRouteRedistMetric Integer32, hm2AgentOspfRouteRedistMetricConfigured TruthValue, hm2AgentOspfRouteRedistMetricType INTEGER, hm2AgentOspfRouteRedistTag Unsigned32, hm2AgentOspfRouteRedistSubnets TruthValue, hm2AgentOspfRouteRedistDistList Unsigned32, hm2AgentOspfRouteRedistDistListConfigured TruthValue } hm2AgentOspfRouteRedistSource OBJECT-TYPE SYNTAX INTEGER { connected(1), static(2), rip(3), bgp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry." ::= { hm2AgentOspfRouteRedistEntry 1 } hm2AgentOspfRouteRedistMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "User enables/disables route-redistribution for a particular source protocol." DEFVAL { disable } ::= { hm2AgentOspfRouteRedistEntry 2 } hm2AgentOspfRouteRedistMetric OBJECT-TYPE SYNTAX Integer32 (0..16777214) MAX-ACCESS read-write STATUS current DESCRIPTION "Metric used for redistributing a particular source protocol route into OSPF." ::= { hm2AgentOspfRouteRedistEntry 3 } hm2AgentOspfRouteRedistMetricConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether OSPF redistribute-metric is configured or not." ::= { hm2AgentOspfRouteRedistEntry 4 } hm2AgentOspfRouteRedistMetricType OBJECT-TYPE SYNTAX INTEGER { externalType1(1), externalType2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2)." DEFVAL { externalType2 } ::= { hm2AgentOspfRouteRedistEntry 5 } --#ifdef HM_MODIFIED /* More details : https://haczilla.belden.eu.com/show_bug.cgi?id=30813 */ hm2AgentOspfRouteRedistTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the tag field in routes redistributed by OSPF." ::= { hm2AgentOspfRouteRedistEntry 6 } hm2AgentOspfRouteRedistSubnets OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this value is false, then OSPF will not redistribute subnetted routes." DEFVAL { true } ::= { hm2AgentOspfRouteRedistEntry 7 } hm2AgentOspfRouteRedistDistList OBJECT-TYPE SYNTAX Unsigned32 (0|1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Access-list number of the access-list, which filters routes received from a source-protocol. HiOS: Valid access list numbers are between 1000 and 1099. HiSecOS: Valid access list numbers are between 1 and 10000." ::= { hm2AgentOspfRouteRedistEntry 8 } hm2AgentOspfRouteRedistDistListConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether Access-list is configured or not." ::= { hm2AgentOspfRouteRedistEntry 9 } hm2AgentOspfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB." ::= { hm2AgentRouterOspfConfigGroup 9 } hm2AgentOspfIfEntry OBJECT-TYPE SYNTAX Hm2AgentOspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB." AUGMENTS { ospfIfEntry } ::= { hm2AgentOspfIfTable 1 } Hm2AgentOspfIfEntry ::= SEQUENCE { hm2AgentOspfIfAuthKeyId Integer32, hm2AgentOspfIfIpMtuIgnoreFlag INTEGER, hm2AgentOspfIfPassiveMode TruthValue, hm2AgentOspfIfAdvertiseSecondaries INTEGER, hm2AgentOspfIfFastHelloMode INTEGER } hm2AgentOspfIfAuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used." ::= { hm2AgentOspfIfEntry 1 } hm2AgentOspfIfIpMtuIgnoreFlag OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the IP MTU Ignore Flag value for this OSPF interface." ::= { hm2AgentOspfIfEntry 2 } hm2AgentOspfIfPassiveMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation." DEFVAL { false } ::= { hm2AgentOspfIfEntry 3 } hm2AgentOspfIfAdvertiseSecondaries OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the advertisability of the secondary addresses configured on this interface." ::= { hm2AgentOspfIfEntry 4 } hm2AgentOspfIfFastHelloMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the fast hello mode on this interface. If enabled, hello packets are sent every 250ms, ospfIfHelloInterval is ignored. The dead interval and spf delay need to be re-configured accordingly for faster convergence." DEFVAL { disable } ::= { hm2AgentOspfIfEntry 248 } hm2AgentOspfVirtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfVirtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB." ::= { hm2AgentRouterOspfConfigGroup 10 } hm2AgentOspfVirtIfEntry OBJECT-TYPE SYNTAX Hm2AgentOspfVirtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB." AUGMENTS { ospfVirtIfEntry } ::= { hm2AgentOspfVirtIfTable 1 } Hm2AgentOspfVirtIfEntry ::= SEQUENCE { hm2AgentOspfVirtIfAuthKeyId Integer32 } hm2AgentOspfVirtIfAuthKeyId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used." ::= { hm2AgentOspfVirtIfEntry 1 } hm2AgentRouterOspfRFC1583CompatibilityMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops." DEFVAL { enable } ::= { hm2AgentRouterOspfConfigGroup 11 } hm2AgentOspfSpfDelayTime OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A value of 0 means that there is no delay; that is, the SPF calculation is started immediately." DEFVAL { 5 } ::= { hm2AgentRouterOspfConfigGroup 12 } hm2AgentOspfSpfHoldTime OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay; that is, two SPF calculations can be done, one immediately after the other." DEFVAL { 10 } ::= { hm2AgentRouterOspfConfigGroup 13 } hm2AgentOspfAutoCostRefBw OBJECT-TYPE SYNTAX Unsigned32 (1..4294967) MAX-ACCESS read-write STATUS current DESCRIPTION "Auto cost reference bandwidth of the router interfaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps." DEFVAL { 100 } ::= { hm2AgentRouterOspfConfigGroup 14 } hm2AgentOspfOpaqueLsaSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." REFERENCE "The OSPF Opaque LSA Option" ::= { hm2AgentRouterOspfConfigGroup 15 } hm2AgentOspfAreaOpaqueLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfAreaOpaqueLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to." REFERENCE "OSPF Version 2, Section 12 Link State Advertisements" ::= { hm2AgentRouterOspfConfigGroup 16 } hm2AgentOspfAreaOpaqueLsdbEntry OBJECT-TYPE SYNTAX Hm2AgentOspfAreaOpaqueLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single AreaOpaque Link State Advertisement." INDEX { hm2AgentOspfAreaOpaqueLsdbAreaId, hm2AgentOspfAreaOpaqueLsdbType, hm2AgentOspfAreaOpaqueLsdbLsid, hm2AgentOspfAreaOpaqueLsdbRouterId } ::= { hm2AgentOspfAreaOpaqueLsdbTable 1 } Hm2AgentOspfAreaOpaqueLsdbEntry ::= SEQUENCE { hm2AgentOspfAreaOpaqueLsdbAreaId IpAddress, hm2AgentOspfAreaOpaqueLsdbType INTEGER, hm2AgentOspfAreaOpaqueLsdbLsid IpAddress, hm2AgentOspfAreaOpaqueLsdbRouterId RouterID, hm2AgentOspfAreaOpaqueLsdbSequence Integer32, hm2AgentOspfAreaOpaqueLsdbAge Integer32, hm2AgentOspfAreaOpaqueLsdbChecksum Integer32, hm2AgentOspfAreaOpaqueLsdbAdvertisement OCTET STRING } hm2AgentOspfAreaOpaqueLsdbAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 1 } hm2AgentOspfAreaOpaqueLsdbType OBJECT-TYPE SYNTAX INTEGER { areaOpaqueLink(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertisement format." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 2 } hm2AgentOspfAreaOpaqueLsdbLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 3 } hm2AgentOspfAreaOpaqueLsdbRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 4 } hm2AgentOspfAreaOpaqueLsdbSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 5 } hm2AgentOspfAreaOpaqueLsdbAge OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state advertisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 6 } hm2AgentOspfAreaOpaqueLsdbChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 7 } hm2AgentOspfAreaOpaqueLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size" REFERENCE "OSPF Version 2, Section 12 Link State Advertisements" ::= { hm2AgentOspfAreaOpaqueLsdbEntry 8 } hm2AgentOspfLocalLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfLocalLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Advertisements for non-virtual links. The purpose is to allow Link-Local LSAs to be displayed for each non-virtual interface. This table is implemented to support type-9 LSAs which are defined in 'The OSPF Opaque LSA Option'." REFERENCE "OSPF Version 2, Section 12 Link State Advertisements and The OSPF Opaque LSA Option" ::= { hm2AgentRouterOspfConfigGroup 17 } hm2AgentOspfLocalLsdbEntry OBJECT-TYPE SYNTAX Hm2AgentOspfLocalLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single Link State Advertisement." INDEX { hm2AgentOspfLocalLsdbIpAddress, hm2AgentOspfLocalLsdbAddressLessIf, hm2AgentOspfLocalLsdbType, hm2AgentOspfLocalLsdbLsid, hm2AgentOspfLocalLsdbRouterId } ::= { hm2AgentOspfLocalLsdbTable 1 } Hm2AgentOspfLocalLsdbEntry ::= SEQUENCE { hm2AgentOspfLocalLsdbIpAddress IpAddress, hm2AgentOspfLocalLsdbAddressLessIf InterfaceIndexOrZero, hm2AgentOspfLocalLsdbType INTEGER, hm2AgentOspfLocalLsdbLsid IpAddress, hm2AgentOspfLocalLsdbRouterId RouterID, hm2AgentOspfLocalLsdbSequence Integer32, hm2AgentOspfLocalLsdbAge Integer32, hm2AgentOspfLocalLsdbChecksum Integer32, hm2AgentOspfLocalLsdbAdvertisement OCTET STRING } hm2AgentOspfLocalLsdbIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the interface from which the LSA was received if the interface is numbered." REFERENCE "OSPF Version 2, Appendix C.3 Interface parameters" ::= { hm2AgentOspfLocalLsdbEntry 1 } hm2AgentOspfLocalLsdbAddressLessIf OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface Index of the interface from which the LSA was received if the interface is unnumbered." REFERENCE "OSPF Version 2, Appendix C.3 Interface parameters" ::= { hm2AgentOspfLocalLsdbEntry 2 } hm2AgentOspfLocalLsdbType OBJECT-TYPE SYNTAX INTEGER { localOpaqueLink(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header and " ::= { hm2AgentOspfLocalLsdbEntry 3 } hm2AgentOspfLocalLsdbLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { hm2AgentOspfLocalLsdbEntry 4 } hm2AgentOspfLocalLsdbRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { hm2AgentOspfLocalLsdbEntry 5 } hm2AgentOspfLocalLsdbSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { hm2AgentOspfLocalLsdbEntry 6 } hm2AgentOspfLocalLsdbAge OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state adver- tisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { hm2AgentOspfLocalLsdbEntry 7 } hm2AgentOspfLocalLsdbChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { hm2AgentOspfLocalLsdbEntry 8 } hm2AgentOspfLocalLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { hm2AgentOspfLocalLsdbEntry 9 } hm2AgentOspfAsLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfAsLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { hm2AgentRouterOspfConfigGroup 18 } hm2AgentOspfAsLsdbEntry OBJECT-TYPE SYNTAX Hm2AgentOspfAsLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single Link State Advertisement." INDEX { hm2AgentOspfAsLsdbType, hm2AgentOspfAsLsdbLsid, hm2AgentOspfAsLsdbRouterId } ::= { hm2AgentOspfAsLsdbTable 1 } Hm2AgentOspfAsLsdbEntry ::= SEQUENCE { hm2AgentOspfAsLsdbType INTEGER, hm2AgentOspfAsLsdbLsid IpAddress, hm2AgentOspfAsLsdbRouterId RouterID, hm2AgentOspfAsLsdbSequence Integer32, hm2AgentOspfAsLsdbAge Integer32, hm2AgentOspfAsLsdbChecksum Integer32, hm2AgentOspfAsLsdbAdvertisement OCTET STRING } hm2AgentOspfAsLsdbType OBJECT-TYPE SYNTAX INTEGER { asOpaqueLink(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { hm2AgentOspfAsLsdbEntry 1 } hm2AgentOspfAsLsdbLsid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { hm2AgentOspfAsLsdbEntry 2 } hm2AgentOspfAsLsdbRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { hm2AgentOspfAsLsdbEntry 3 } hm2AgentOspfAsLsdbSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { hm2AgentOspfAsLsdbEntry 4 } hm2AgentOspfAsLsdbAge OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the age of the link state adver- tisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { hm2AgentOspfAsLsdbEntry 5 } hm2AgentOspfAsLsdbChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { hm2AgentOspfAsLsdbEntry 6 } hm2AgentOspfAsLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The entire Link State Advertisement, including its header." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size." ::= { hm2AgentOspfAsLsdbEntry 7 } hm2AgentOspfDefaultPassiveMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation." DEFVAL { false } ::= { hm2AgentRouterOspfConfigGroup 19 } hm2AgentOspfRoutePrefIntraArea OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable." DEFVAL { 110 } ::= { hm2AgentRouterOspfConfigGroup 20 } hm2AgentOspfRoutePrefInterArea OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable." DEFVAL { 110 } ::= { hm2AgentRouterOspfConfigGroup 21 } hm2AgentOspfRoutePrefExternal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable." DEFVAL { 110 } ::= { hm2AgentRouterOspfConfigGroup 22 } -- -- hm2AgentOspfAreaNSSAEntry -- hm2AgentOspfAreaNSSATable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfAreaNSSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all the configured Not-So-Stubby-Area(NSSAs) in OSPF. Augments ospfAreaTable from the OSPF-MIB." ::= { hm2AgentRouterOspfConfigGroup 248 } hm2AgentOspfAreaNSSAEntry OBJECT-TYPE SYNTAX Hm2AgentOspfAreaNSSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single Not-So-Stubby-Area(NSSA). Augments ospfAreaEntry in OSPF-MIB." AUGMENTS { ospfAreaEntry } ::= { hm2AgentOspfAreaNSSATable 1 } Hm2AgentOspfAreaNSSAEntry ::= SEQUENCE { hm2AgentOspfAreaNSSAImportSummaries HmEnabledStatus, hm2AgentOspfAreaNSSARedistribute HmEnabledStatus, hm2AgentOspfAreaNSSADefaultInfoOriginate TruthValue, hm2AgentOspfAreaNSSADefaultMetric Integer32, hm2AgentOspfAreaNSSADefaultMetricType INTEGER } hm2AgentOspfAreaNSSAImportSummaries OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enabled, OSPF's summary routes are imported into the NSSA as Type-3 summary-LSAs. When set to disabled, summary routes are not imported into the NSSA. The default setting is enabled." DEFVAL { enable } ::= { hm2AgentOspfAreaNSSAEntry 1 } hm2AgentOspfAreaNSSARedistribute OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enabled NSSA ASBRs will not redistribute external routes into the NSSA and they will cease to originate Type-7 external LSAs for external routes." DEFVAL { enable } ::= { hm2AgentOspfAreaNSSAEntry 2 } hm2AgentOspfAreaNSSADefaultInfoOriginate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Determines if the router will originate a Type-7 default LSA into the NSSA. This command will cause a default LSA to be originated only if the router is an NSSA ABR or ASBR." DEFVAL { false } ::= { hm2AgentOspfAreaNSSAEntry 3 } hm2AgentOspfAreaNSSADefaultMetric OBJECT-TYPE SYNTAX Integer32 (1..16777214) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the metric value advertised in the Type-7 default LSA originated by this router" DEFVAL { 10 } ::= { hm2AgentOspfAreaNSSAEntry 4 } hm2AgentOspfAreaNSSADefaultMetricType OBJECT-TYPE SYNTAX INTEGER { ospfMetric (1), comparable (2), nonComparable (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the metric type advertised in the Type-7 default LSA originated by this router" DEFVAL { nonComparable } ::= { hm2AgentOspfAreaNSSAEntry 5 } -- -- hm2AgentOspfIfMetricTable -- hm2AgentOspfIfMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfIfMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about interface metrics." ::= { hm2AgentRouterOspfConfigGroup 249 } hm2AgentOspfIfMetricEntry OBJECT-TYPE SYNTAX Hm2AgentOspfIfMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about interface metrics." AUGMENTS { ospfIfMetricEntry } ::= { hm2AgentOspfIfMetricTable 1 } Hm2AgentOspfIfMetricEntry ::= SEQUENCE { hm2AgentOspfIfMetricCalculatedCost Integer32 } hm2AgentOspfIfMetricCalculatedCost OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the actual cost value used by OSPF for this interface." ::= { hm2AgentOspfIfMetricEntry 1 } -- -- hm2AgentSnmpTrapFlagsConfigGroupLayer3 -- hm2AgentSnmpTrapFlagsConfigGroupLayer3 OBJECT IDENTIFIER ::= { hm2PlatformRouting 5 } hm2AgentSnmpVRRPNewMasterTrapFlag OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This flag enables the sending of VRRP new master notification traps." DEFVAL { disable } ::= { hm2AgentSnmpTrapFlagsConfigGroupLayer3 1 } hm2AgentSnmpVRRPAuthFailureTrapFlag OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This flag enables the sending of VRRP authentication failure notification traps." DEFVAL { disable } ::= { hm2AgentSnmpTrapFlagsConfigGroupLayer3 2 } -- -- hm2AgentBootpDhcpRelayGroup -- hm2AgentBootpDhcpRelayGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 6 } hm2AgentBootpDhcpRelayMaxHopCount OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped through the intermediate agents. The default value is 4." DEFVAL { 4 } ::= { hm2AgentBootpDhcpRelayGroup 1 } hm2AgentBootpDhcpRelayMinWaitTime OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began booting) field of the request as a factor in deciding whether to relay the request or not." ::= { hm2AgentBootpDhcpRelayGroup 4 } hm2AgentBootpDhcpRelayCircuitIdOptionMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options." ::= { hm2AgentBootpDhcpRelayGroup 5 } -- -- hm2AgentECMPGroup -- hm2AgentECMPGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 7 } hm2AgentECMPOspfMaxPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent." ::= { hm2AgentECMPGroup 1 } -- -- hm2AgentRouterVrrpConfigGroup -- hm2AgentRouterVrrpConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 8 } hm2AgentRouterVrrpAdminState OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the administrative mode of VRRP in the router." ::= { hm2AgentRouterVrrpConfigGroup 1 } -- -- hm2AgentRouterVrrpOperTable -- hm2AgentVrrpOperations OBJECT IDENTIFIER ::= { hm2PlatformRouting 9 } hm2AgentRouterVrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentRouterVrrpOperEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `hm2AgentRouterVrrpOperEntry' items." ::= { hm2AgentVrrpOperations 1 } hm2AgentRouterVrrpOperEntry OBJECT-TYPE SYNTAX Hm2AgentRouterVrrpOperEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the table contains operational priority that is associated with a virtual router." INDEX { ifIndex, vrrpOperVrId } ::= { hm2AgentRouterVrrpOperTable 1 } Hm2AgentRouterVrrpOperEntry ::= SEQUENCE { hm2AgentRouterVrrpOperPriority Integer32 } hm2AgentRouterVrrpOperPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by the vrrpOperPriority object." ::= { hm2AgentRouterVrrpOperEntry 1 } hm2AgentRouterVrrpNumberOfFastInst OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VRRP instances with advertisement interval less than one second." ::= { hm2AgentVrrpOperations 248 } -- -- hm2AgentIpHelperGroup -- hm2AgentIpHelperGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 11 } hm2AgentIpHelperAdminMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable or disable IP helper." ::= { hm2AgentIpHelperGroup 1 } hm2AgentDhcpClientMsgsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of DHCP Requests Received. Total number of DHCP requests received from all clients." ::= { hm2AgentIpHelperGroup 2 } hm2AgentDhcpClientMsgsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of DHCP Requests Forwarded. Total number of DHCP requests relayed to a server." ::= { hm2AgentIpHelperGroup 3 } hm2AgentDhcpServerMsgsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP messages received from a server." ::= { hm2AgentIpHelperGroup 4 } hm2AgentDhcpServerMsgsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP messages relayed to a server." ::= { hm2AgentIpHelperGroup 5 } hm2AgentUdpClientMsgsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP messages received from all clients." ::= { hm2AgentIpHelperGroup 6 } hm2AgentUdpClientMsgsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP messages relayed to a server." ::= { hm2AgentIpHelperGroup 7 } hm2AgentSwitchIpHelperAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchIpHelperAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains a list of IP helper addresses configured globally." ::= { hm2AgentIpHelperGroup 8 } hm2AgentSwitchIpHelperAddressEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchIpHelperAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP Helper address that applies to packets received on any interface." INDEX { hm2AgentSwitchIpHelperUdpPort, hm2AgentSwitchIpHelperAddress } ::= { hm2AgentSwitchIpHelperAddressTable 1 } Hm2AgentSwitchIpHelperAddressEntry ::= SEQUENCE { hm2AgentSwitchIpHelperUdpPort Unsigned32, hm2AgentSwitchIpHelperAddress IpAddress, hm2AgentSwitchIpHelperHitCount Unsigned32, hm2AgentSwitchIpHelperStatus RowStatus } hm2AgentSwitchIpHelperUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "UDP port number. A relay entry with port 0 allows dhcp, time, winnameserver, tacacs, dns, tftp, netbios-ns and netbios-dgm relay." ::= { hm2AgentSwitchIpHelperAddressEntry 1 } hm2AgentSwitchIpHelperAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Helper address assigned to this interface." ::= { hm2AgentSwitchIpHelperAddressEntry 2 } hm2AgentSwitchIpHelperHitCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a packet has been forwarded or discarded according to this entry." ::= { hm2AgentSwitchIpHelperAddressEntry 3 } hm2AgentSwitchIpHelperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the global IP Helper address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry." ::= { hm2AgentSwitchIpHelperAddressEntry 4 } hm2AgentUdpClientMsgsTtlExpired OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP messages received with an expired TTL." ::= { hm2AgentIpHelperGroup 9 } hm2AgentUdpClientMsgsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP messages that matched a discard entry." ::= { hm2AgentIpHelperGroup 10 } -- -- hm2AgentInternalVlanGroup -- hm2AgentInternalVlanGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 12 } hm2AgentInternalVlanBase OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID internally assigned to the first port-based routing interface." DEFVAL { 4093 } ::= { hm2AgentInternalVlanGroup 1 } hm2AgentInternalVlanPolicy OBJECT-TYPE SYNTAX INTEGER { ascending(0), descending(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to search up or down from the base VLAN ID for a free VLAN ID to assign to a port-based routing interface." DEFVAL { descending } ::= { hm2AgentInternalVlanGroup 2 } hm2AgentSwitchInternalVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentSwitchInternalVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains a list of VLAN IDs used internally for port-based routing interfaces." ::= { hm2AgentInternalVlanGroup 3 } hm2AgentSwitchInternalVlanEntry OBJECT-TYPE SYNTAX Hm2AgentSwitchInternalVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VLAN ID internally assigned to a port-based routing interface." INDEX { hm2AgentSwitchInternalVlanId } ::= { hm2AgentSwitchInternalVlanTable 1 } Hm2AgentSwitchInternalVlanEntry ::= SEQUENCE { hm2AgentSwitchInternalVlanId VlanId, hm2AgentSwitchInternalVlanIfIndex InterfaceIndex } hm2AgentSwitchInternalVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VLAN ID internally assigned to a port-based routing interface." ::= { hm2AgentSwitchInternalVlanEntry 1 } hm2AgentSwitchInternalVlanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of port-based routing interface using this VLAN ID." ::= { hm2AgentSwitchInternalVlanEntry 2 } -- -- hm2AgentOspfQueueGroup -- hm2AgentOspfQueueGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 13 } hm2AgentOspfQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table lists information about OSPFv2 message queue utilization." ::= { hm2AgentOspfQueueGroup 1 } hm2AgentOspfQueueEntry OBJECT-TYPE SYNTAX Hm2AgentOspfQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a specific OSPFv2 message queue." INDEX { hm2AgentOspfQueueIndex } ::= { hm2AgentOspfQueueTable 1 } Hm2AgentOspfQueueEntry ::= SEQUENCE { hm2AgentOspfQueueIndex Unsigned32, hm2AgentOspfQueueName DisplayString, hm2AgentOspfQueueLength Gauge32, hm2AgentOspfQueueHigh Gauge32, hm2AgentOspfQueueDrops Counter32, hm2AgentOspfQueueLimit Unsigned32 } hm2AgentOspfQueueIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index value for this message queue." ::= { hm2AgentOspfQueueEntry 1 } hm2AgentOspfQueueName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of an OSPFv2 message queue." ::= { hm2AgentOspfQueueEntry 2 } hm2AgentOspfQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages currently in the message queue." ::= { hm2AgentOspfQueueEntry 3 } hm2AgentOspfQueueHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high water mark of the number of messages in the message queue." ::= { hm2AgentOspfQueueEntry 4 } hm2AgentOspfQueueDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of items dropped because the message queue was full." ::= { hm2AgentOspfQueueEntry 5 } hm2AgentOspfQueueLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of messages this queue can hold." ::= { hm2AgentOspfQueueEntry 6 } -- -- hm2AgentOspfPacketStatsGroup -- hm2AgentOspfPacketStatsGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 14 } hm2AgentOspfCountersCleared OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time since OSPFv2 counters were last cleared, in seconds." ::= { hm2AgentOspfPacketStatsGroup 1 } hm2AgentOspfLsaRetxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LSAs retransmitted since OSPF counters were last cleared. If the same LSA is retransmitted to multiple neighbors, the count is incremented for each neighbor." ::= { hm2AgentOspfPacketStatsGroup 2 } hm2AgentOspfHellosRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 Hello packets received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 3 } hm2AgentOspfHellosTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 Hello packets transmitted since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 4 } hm2AgentOspfDdRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 Database Description packets received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 5 } hm2AgentOspfDdTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 Database Description packets transmitted since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 6 } hm2AgentOspfLsReqRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 LS Request packets received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 7 } hm2AgentOspfLsReqTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 LS Request packets transmitted since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 8 } hm2AgentOspfLsUpdatesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 LS Update packets received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 9 } hm2AgentOspfLsUpdatesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 LS Update packets transmitted since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 10 } hm2AgentOspfLsAckRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 LS Acknowledgement packets received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 11 } hm2AgentOspfLsAckTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPFv2 LS Acknowledgement packets transmitted since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 12 } hm2AgentOspfLsUpdatesRxMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum rate of OSPFv2 LS Update packets received over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per second (that is, the number of packets received during the 5-second interval, divided by 5)." ::= { hm2AgentOspfPacketStatsGroup 13 } hm2AgentOspfLsUpdatesTxMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum rate of OSPFv2 LS Update packets transmitted over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per second (that is, the number of packets transmitted during the 5-second interval, divided by 5)." ::= { hm2AgentOspfPacketStatsGroup 14 } hm2AgentOspfType1LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 1 (router) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 15 } hm2AgentOspfType2LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 2 (network) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 16 } hm2AgentOspfType3LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 3 (network summary) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 17 } hm2AgentOspfType4LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 4 (ASBR summary) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 18 } hm2AgentOspfType5LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 5 (external) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 19 } hm2AgentOspfType7LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 7 (NSSA external) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 20 } hm2AgentOspfType9LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 9 (Link Opaque) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 21 } hm2AgentOspfType10LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 10 (Area Opaque) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 22 } hm2AgentOspfType11LsasRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of type 11 (AS Opaque) LSAs received since OSPF counters were last cleared." ::= { hm2AgentOspfPacketStatsGroup 23 } -- -- hm2AgentOspfSpfStatsTable -- hm2AgentOspfSpfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfSpfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains statistics for the twenty most recent SPF runs. Statistics are reported from the oldest SPF first to the most recent." ::= { hm2PlatformRouting 15 } hm2AgentOspfSpfStatsEntry OBJECT-TYPE SYNTAX Hm2AgentOspfSpfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for a single SPF run." INDEX { hm2AgentOspfSpfIndex } ::= { hm2AgentOspfSpfStatsTable 1 } Hm2AgentOspfSpfStatsEntry ::= SEQUENCE { hm2AgentOspfSpfIndex Unsigned32, hm2AgentOspfSpfStatsDeltaT Unsigned32, hm2AgentOspfSpfStatsIntra Unsigned32, hm2AgentOspfSpfStatsSumm Unsigned32, hm2AgentOspfSpfStatsExt Unsigned32, hm2AgentOspfSpfStatsSpfTotal Unsigned32, hm2AgentOspfSpfStatsRibUpdate Unsigned32, hm2AgentOspfSpfStatsReason DisplayString } hm2AgentOspfSpfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Integer that uniquely identifies an SPF run. This value is incremented each time OSPF runs a full routing table calculation." ::= { hm2AgentOspfSpfStatsEntry 1 } hm2AgentOspfSpfStatsDeltaT OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "How long since this routing table calculation ran. The time is given in seconds." ::= { hm2AgentOspfSpfStatsEntry 2 } hm2AgentOspfSpfStatsIntra OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of milliseconds to compute intra-area routes." ::= { hm2AgentOspfSpfStatsEntry 3 } hm2AgentOspfSpfStatsSumm OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of milliseconds to compute inter-area routes." ::= { hm2AgentOspfSpfStatsEntry 4 } hm2AgentOspfSpfStatsExt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of milliseconds to compute external routes." ::= { hm2AgentOspfSpfStatsEntry 5 } hm2AgentOspfSpfStatsSpfTotal OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of milliseconds for entire routing table calculation." ::= { hm2AgentOspfSpfStatsEntry 6 } hm2AgentOspfSpfStatsRibUpdate OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of milliseconds to update the common routing table." ::= { hm2AgentOspfSpfStatsEntry 7 } hm2AgentOspfSpfStatsReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Reasons why a routing table calculation was required. R - new router LSA, N - new Network LSA, SN - new network summary LSA, SA - new ASBR summary LSA, X - new external LSA." ::= { hm2AgentOspfSpfStatsEntry 8 } --**************************************************************** -- hm2AgentRoutingHeapGroup -- --**************************************************************** hm2AgentRoutingHeapGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 16 } hm2AgentRoutingHeapSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the routing heap, in bytes. Unicast routing protocols and ARP allocate memory from the routing heap." ::= { hm2AgentRoutingHeapGroup 1 } hm2AgentRoutingHeapInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes currently allocated from the routing heap." ::= { hm2AgentRoutingHeapGroup 2 } hm2AgentRoutingHeapHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "High water mark for the number of bytes allocated from the routing heap." ::= { hm2AgentRoutingHeapGroup 3 } --**************************************************************** -- hm2AgentRoutingTableSummaryGroup -- --**************************************************************** hm2AgentRoutingTableSummaryGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 17 } hm2AgentConnectedRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connected routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 1 } hm2AgentStaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of static routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 2 } hm2AgentRipRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RIP routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 3 } hm2AgentOspfRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 4 } hm2AgentOspfIntraRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 intra-area routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 5 } hm2AgentOspfInterRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 inter-area routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 6 } hm2AgentOspfExt1Routes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 external type 1 routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 7 } hm2AgentOspfExt2Routes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 external type 2 routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 8 } hm2AgentBgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 9 } hm2AgentEbgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external BGP routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 10 } hm2AgentIbgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of internal BGP routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 11 } hm2AgentLocalBgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local BGP routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 12 } hm2AgentRejectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reject routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 13 } hm2AgentTotalRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 14 } hm2AgentBestRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv4 routes in the forwarding table." ::= { hm2AgentRoutingTableSummaryGroup 15 } hm2AgentBestRoutesHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of IPv4 routes in the forwarding table." ::= { hm2AgentRoutingTableSummaryGroup 16 } hm2AgentAlternateRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of alternate routes in the IPv4 routing table. An alternate route is less preferred than the best route and is not used for forwarding." ::= { hm2AgentRoutingTableSummaryGroup 17 } hm2AgentRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes added to the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 18 } hm2AgentRouteModifies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes changed in the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 19 } hm2AgentRouteDeletes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes removed from the IPv4 routing table." ::= { hm2AgentRoutingTableSummaryGroup 20 } hm2AgentUnresolvedRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv4 route adds that failed because none of the route's next hops were on a local subnet." ::= { hm2AgentRoutingTableSummaryGroup 21 } hm2AgentInvalidRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv4 routes adds that failed because the route was invalid." ::= { hm2AgentRoutingTableSummaryGroup 22 } hm2AgentFailedRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv4 routes adds that failed because of a resource limitation in the routing table" ::= { hm2AgentRoutingTableSummaryGroup 23 } hm2AgentReservedLocals OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down. " ::= { hm2AgentRoutingTableSummaryGroup 24 } hm2AgentUniqueNextHops OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of distinct next hops used among all IPv4 routes currently in the routing table. These include local interfaces for local routes and neighbors for indirect routes." ::= { hm2AgentRoutingTableSummaryGroup 25 } hm2AgentUniqueNextHopsHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest count of unique next hops since counters were last cleared." ::= { hm2AgentRoutingTableSummaryGroup 26 } hm2AgentNextHopGroups OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of next hop groups in use by one or more routes. Each next hop group includes one or more next hops." ::= { hm2AgentRoutingTableSummaryGroup 27 } hm2AgentNextHopGroupsHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest count of next hop groups since counters were last cleared." ::= { hm2AgentRoutingTableSummaryGroup 28 } hm2AgentEcmpGroups OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of next hop groups with multiple next hops." ::= { hm2AgentRoutingTableSummaryGroup 29 } hm2AgentEcmpGroupsHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high water mark of the number of ECMP groups." ::= { hm2AgentRoutingTableSummaryGroup 30 } hm2AgentEcmpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of IPv4 routes with multiple next hops." ::= { hm2AgentRoutingTableSummaryGroup 31 } hm2AgentTruncEcmpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes or the number of ECMP groups. When an ECMP route cannot be installed because such a limit is reached, the route is installed with a single next hop." ::= { hm2AgentRoutingTableSummaryGroup 32 } hm2AgentEcmpRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop." ::= { hm2AgentRoutingTableSummaryGroup 33 } --**************************************************************** -- hm2AgentEcmpCountTable -- --************************************************************ hm2AgentEcmpCountTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentEcmpCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A count of the number of routes with each number of ECMP next hops." ::= { hm2PlatformRouting 18} hm2AgentEcmpCountEntry OBJECT-TYPE SYNTAX Hm2AgentEcmpCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of IPv4 routes with a given number of next hops." INDEX { hm2AgentEcmpNextHopCount } ::= { hm2AgentEcmpCountTable 1 } Hm2AgentEcmpCountEntry ::= SEQUENCE { hm2AgentEcmpNextHopCount Unsigned32, hm2AgentEcmpRouteCount Gauge32 } hm2AgentEcmpNextHopCount OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform." ::= { hm2AgentEcmpCountEntry 1 } hm2AgentEcmpRouteCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv4 routes with agentEcmpNextHopCount next hops." ::= { hm2AgentEcmpCountEntry 2 } --**************************************************************** -- hm2AgentOspfStubRouterGroup -- --**************************************************************** hm2AgentOspfStubRouterGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 19 } hm2AgentOspfStubRouterAdvertisement OBJECT-TYPE SYNTAX INTEGER { doNotAdvertise(1), advertise(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies how the router LSAs are advertised by the router. The value doNotAdvertise indicates the advertisement of a standard router LSA and is the default value. The value advertise indicates the advertisement of a stub router LSA." ::= { hm2AgentOspfStubRouterGroup 1 } hm2AgentOspfStubRouterReason OBJECT-TYPE SYNTAX INTEGER { configured(0), startup(1), resource-limitation(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the reason because of which the router is in Stub mode. This is valid only if the agentOspfStubRouterMode is 'active'." ::= { hm2AgentOspfStubRouterGroup 2 } hm2AgentOspfStubRouterStartupTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining (in seconds) for the router to come out of the stub mode. This is valid only if the agentOspfStubRouterReason is 'startup'." ::= { hm2AgentOspfStubRouterGroup 3 } hm2AgentOspfStubRouterDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed (in seconds) since the router last entered the stub router mode. This is valid only if the agentOspfStubRouterMode is 'active' and agentOspfStubRouterReason is 'resource-limitation'." ::= { hm2AgentOspfStubRouterGroup 4 } -- -- hm2AgentOspfNbrTable -- hm2AgentOspfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about this router's neighbors. Augments ospfNbrTable from the OSPF-MIB." ::= { hm2PlatformRouting 249 } hm2AgentOspfNbrEntry OBJECT-TYPE SYNTAX Hm2AgentOspfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single neighbor. Augments ospfNbrEntry in OSPF-MIB." AUGMENTS { ospfNbrEntry } ::= { hm2AgentOspfNbrTable 1 } Hm2AgentOspfNbrEntry ::= SEQUENCE { hm2AgentOspfNbrDeadTime TimeTicks } hm2AgentOspfNbrDeadTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor's Dead Time is the amount of remaining time since the last OSPF hello packet received, before declaring the neighbor status as down." ::= { hm2AgentOspfNbrEntry 1 } -- -- hm2AgentOspfRouteTable -- hm2AgentOspfRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentOspfRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about this router's OSPF routes." ::= { hm2PlatformRouting 250 } hm2AgentOspfRouteEntry OBJECT-TYPE SYNTAX Hm2AgentOspfRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single route." INDEX { hm2AgentOspfRouteNet, hm2AgentOspfRouteMask } ::= { hm2AgentOspfRouteTable 1 } Hm2AgentOspfRouteEntry ::= SEQUENCE { hm2AgentOspfRouteNet InetAddressIPv4, hm2AgentOspfRouteMask InetAddressIPv4, hm2AgentOspfRouteCost Integer32, hm2AgentOspfRouteProtoType INTEGER } hm2AgentOspfRouteNet OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of the Net or Subnet indicated by the route." ::= { hm2AgentOspfRouteEntry 1 } hm2AgentOspfRouteMask OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Subnet Mask that pertains to the Net or Subnet." ::= { hm2AgentOspfRouteEntry 2 } hm2AgentOspfRouteCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route cost calculated in the SPF algorithm to reach the network." ::= { hm2AgentOspfRouteEntry 3 } hm2AgentOspfRouteProtoType OBJECT-TYPE SYNTAX INTEGER { intra (1), inter (2), ext-type1 (3), ext-type2 (4), nssa-type1 (5), nssa-type2 (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route that was learned from OSPF." ::= { hm2AgentOspfRouteEntry 4 } -- -- hm2AgentVrrpExtGroup -- hm2AgentVrrpExtGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 260 } -- -- hm2AgentVrrpTrackingTable -- hm2AgentVrrpTrackingTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentVrrpTrackingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains variables to define an entry in the VRRP Tracking database." ::= { hm2AgentVrrpExtGroup 1 } hm2AgentVrrpTrackingEntry OBJECT-TYPE SYNTAX Hm2AgentVrrpTrackingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries of the table." INDEX { hm2AgentVrrpTrackIfIndex, hm2AgentVrrpTrackVrid, IMPLIED hm2AgentVrrpTrackId } ::= { hm2AgentVrrpTrackingTable 1 } Hm2AgentVrrpTrackingEntry ::= SEQUENCE { hm2AgentVrrpTrackIfIndex Integer32, hm2AgentVrrpTrackVrid Integer32, hm2AgentVrrpTrackId SnmpAdminString, hm2AgentVrrpTrackDecrement Integer32, hm2AgentVrrpTrackOperStatus INTEGER, hm2AgentVrrpTrackRowStatus RowStatus } hm2AgentVrrpTrackIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DURABLE: { 1:all } The interface number of the virtual router" ::= { hm2AgentVrrpTrackingEntry 1 } hm2AgentVrrpTrackVrid OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DURABLE: { 1:all } The virtual router id for this virtual router" ::= { hm2AgentVrrpTrackingEntry 2 } hm2AgentVrrpTrackId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "DURABLE: { 1:all } The id of the object being tracked" ::= { hm2AgentVrrpTrackingEntry 3 } hm2AgentVrrpTrackDecrement OBJECT-TYPE SYNTAX Integer32 (1..253) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 1:all } The value by wich the current priority of the virtual router is decremented when the tracked object goes DOWN." ::= { hm2AgentVrrpTrackingEntry 4 } hm2AgentVrrpTrackOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), notReady(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the tracked object is currently UP or DOWN or NOT-READY" ::= { hm2AgentVrrpTrackingEntry 5 } hm2AgentVrrpTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 1:all } Defines the status of a vrrp tracking database entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the tracked object exists and is trackable, notReady(3) otherwise." ::= { hm2AgentVrrpTrackingEntry 6 } -- -- hm2AgentVrrpExtTable -- hm2AgentVrrpExtTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentVrrpExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains variables to define an entry in the VRRP enhancements database." ::= { hm2AgentVrrpExtGroup 2 } hm2AgentVrrpExtEntry OBJECT-TYPE SYNTAX Hm2AgentVrrpExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the hm2AgentVrrpExtTable." INDEX { hm2AgentVrrpExtIfIndex, hm2AgentVrrpExtVrid } ::= { hm2AgentVrrpExtTable 1 } Hm2AgentVrrpExtEntry ::= SEQUENCE { hm2AgentVrrpExtIfIndex Integer32, hm2AgentVrrpExtVrid Integer32, hm2AgentVrrpExtDomainId Integer32, hm2AgentVrrpExtDomainRole INTEGER, hm2AgentVrrpExtDomainStatus INTEGER, hm2AgentVrrpExtAdvertAddress IpAddress, hm2AgentVrrpExtAdvertTimer Integer32, hm2AgentVrrpExtCfgPriority Integer32, hm2AgentVrrpExtNotifyAddress IpAddress, hm2AgentVrrpExtNotifyLinkdown INTEGER, hm2AgentVrrpExtPreemptionDelay Integer32, hm2AgentVrrpPrimaryVirtualAddress IpAddress, hm2AgentVrrpExtMethod INTEGER } hm2AgentVrrpExtIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface number of the virtual router" ::= { hm2AgentVrrpExtEntry 1 } hm2AgentVrrpExtVrid OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The virtual router id for this virtual router" ::= { hm2AgentVrrpExtEntry 2 } hm2AgentVrrpExtDomainId OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The domain this virtual router is a member of. If set to 0, the virtual router is not a member of any domain." DEFVAL { 0 } ::= { hm2AgentVrrpExtEntry 3 } hm2AgentVrrpExtDomainRole OBJECT-TYPE SYNTAX INTEGER { none(1), member(2), supervisor(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The role of this virtual router in its domain. This is none(1) if the virtual router is not member of a domain, supervisor(3) if it is the supervisor of its domain, member(2) otherwise." DEFVAL { none } ::= { hm2AgentVrrpExtEntry 4 } hm2AgentVrrpExtDomainStatus OBJECT-TYPE SYNTAX INTEGER { noError(1), noSupervisor(2), supervisorDown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the domain configuration is correct for this virtual router" ::= { hm2AgentVrrpExtEntry 5 } hm2AgentVrrpExtAdvertAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address advertisements of the virtual router are sent to" DEFVAL { 'E0000012'h } ::= { hm2AgentVrrpExtEntry 6 } hm2AgentVrrpExtAdvertTimer OBJECT-TYPE SYNTAX Integer32 (100..255000) UNITS "milli-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to set the interval between advertisements in milliseconds. This accesses the same value as vrrpOperAdvertisementInterval." DEFVAL { 1000 } ::= { hm2AgentVrrpExtEntry 7 } hm2AgentVrrpExtCfgPriority OBJECT-TYPE SYNTAX Integer32 (1..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The configured priority of the virtual router. This can be different from the operating priority if tracked objects are down or the virtual router is the ip address owner" DEFVAL { 100 } ::= { hm2AgentVrrpExtEntry 8 } hm2AgentVrrpExtNotifyAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address notifications of the virtual router are sent to" DEFVAL { '00000000'H } -- 0.0.0.0 ::= { hm2AgentVrrpExtEntry 9 } hm2AgentVrrpExtNotifyLinkdown OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables sending of notification messages if the virtual router's interface goes down." DEFVAL { disable } ::= { hm2AgentVrrpExtEntry 10 } hm2AgentVrrpExtPreemptionDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time (in seconds) after startup of the virtual router by which the preemption of a Master with a lower priority is delayed." DEFVAL { 0 } ::= { hm2AgentVrrpExtEntry 11 } hm2AgentVrrpPrimaryVirtualAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual IP address in the subnet of the primary ip address on the interface. If no match is found, an unspecified virtual address is returned. If no virtual address is configured, 0.0.0.0 is returned." ::= { hm2AgentVrrpExtEntry 12 } hm2AgentVrrpExtMethod OBJECT-TYPE SYNTAX INTEGER { none (1), config (2), ttdp (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of the VRRP instance. User can set the object to none(1), config(2), ttdp(3)." DEFVAL { none } ::= { hm2AgentVrrpExtEntry 13 } -- -- hm2AgentVrrpDomainTable -- hm2AgentVrrpDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentVrrpDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains variables to define an entry in the VRRP domain database." ::= { hm2AgentVrrpExtGroup 3 } hm2AgentVrrpDomainEntry OBJECT-TYPE SYNTAX Hm2AgentVrrpDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries of the table." INDEX { hm2AgentVrrpDomainId } ::= { hm2AgentVrrpDomainTable 1 } Hm2AgentVrrpDomainEntry ::= SEQUENCE { hm2AgentVrrpDomainId Integer32, hm2AgentVrrpDomainMemberSendAdv INTEGER, hm2AgentVrrpDomainStatus INTEGER, hm2AgentVrrpDomainSupervisorIfIndex Integer32, hm2AgentVrrpDomainSupervisorVrid Integer32, hm2AgentVrrpDomainOperPriority Integer32, hm2AgentVrrpDomainSupervisorOperState INTEGER } hm2AgentVrrpDomainId OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The domain ID." ::= { hm2AgentVrrpDomainEntry 1 } hm2AgentVrrpDomainMemberSendAdv OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 1:all } Determines if the members of this domain send advertisement packets. If set to disabled(2), only the supervisor of the domain sends packets." DEFVAL { disable } ::= { hm2AgentVrrpDomainEntry 2 } hm2AgentVrrpDomainStatus OBJECT-TYPE SYNTAX INTEGER { noError(1), noSupervisor(2), supervisorDown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the configuration of the domain is complete." ::= { hm2AgentVrrpDomainEntry 3 } hm2AgentVrrpDomainSupervisorIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number of the supervisor of the domain" ::= { hm2AgentVrrpDomainEntry 4 } hm2AgentVrrpDomainSupervisorVrid OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual router id of the supervisor of the domain. 0 if unconfigured" ::= { hm2AgentVrrpDomainEntry 5 } hm2AgentVrrpDomainOperPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The current operating priority of the domain. This can be different from the configured priority if tracked objects are down. For domain members this is the priority of the supervisor of that Domain if the supervisor is configured and up." ::= { hm2AgentVrrpDomainEntry 6 } hm2AgentVrrpDomainSupervisorOperState OBJECT-TYPE SYNTAX INTEGER { initialize(1), backup(2), master(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the current operational state of the domain supervisor." ::= { hm2AgentVrrpDomainEntry 7 } -- -- hm2AgentNeighbourGroup -- hm2AgentNeighbourGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 270 } -- -- hm2AgentStaticNeighbourTable -- hm2AgentStaticNeighbourTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentStaticNeighbourEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { hm2AgentNeighbourGroup 10 } hm2AgentStaticNeighbourEntry OBJECT-TYPE SYNTAX Hm2AgentStaticNeighbourEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { hm2AgentStaticNeighbourAddressType, hm2AgentStaticNeighbourAddress } ::= { hm2AgentStaticNeighbourTable 1 } Hm2AgentStaticNeighbourEntry ::= SEQUENCE { hm2AgentStaticNeighbourAddressType InetAddressType, hm2AgentStaticNeighbourAddress InetAddress, hm2AgentStaticNeighbourPhysAddress PhysAddress, hm2AgentStaticNeighbourIfIndex InterfaceIndexOrZero, hm2AgentStaticNeighbourRowStatus RowStatus } hm2AgentStaticNeighbourAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { hm2AgentStaticNeighbourEntry 1 } hm2AgentStaticNeighbourAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { hm2AgentStaticNeighbourEntry 2 } hm2AgentStaticNeighbourPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE(0..65535)) MAX-ACCESS read-create STATUS current DESCRIPTION "." ::= { hm2AgentStaticNeighbourEntry 3 } hm2AgentStaticNeighbourIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { hm2AgentStaticNeighbourEntry 4 } hm2AgentStaticNeighbourRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Setting this object destroy will remove the entry." ::= { hm2AgentStaticNeighbourEntry 5 } -- -- hm2AgentDynamicNeighbourTable -- hm2AgentDynamicNeighbourTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentDynamicNeighbourEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { hm2AgentNeighbourGroup 11 } hm2AgentDynamicNeighbourEntry OBJECT-TYPE SYNTAX Hm2AgentDynamicNeighbourEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { hm2AgentDynamicNeighbourAddressType, hm2AgentDynamicNeighbourAddress } ::= { hm2AgentDynamicNeighbourTable 1 } Hm2AgentDynamicNeighbourEntry ::= SEQUENCE { hm2AgentDynamicNeighbourAddressType InetAddressType, hm2AgentDynamicNeighbourAddress InetAddress, hm2AgentDynamicNeighbourPhysAddress PhysAddress, hm2AgentDynamicNeighbourIfIndex InterfaceIndexOrZero, hm2AgentDynamicNeighbourAction INTEGER } hm2AgentDynamicNeighbourAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { hm2AgentDynamicNeighbourEntry 1 } hm2AgentDynamicNeighbourAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { hm2AgentDynamicNeighbourEntry 2 } hm2AgentDynamicNeighbourPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE(0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { hm2AgentDynamicNeighbourEntry 3 } hm2AgentDynamicNeighbourIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { hm2AgentDynamicNeighbourEntry 4 } hm2AgentDynamicNeighbourAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2), static(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { hm2AgentDynamicNeighbourEntry 5 } -- -- hm2AgentRoutingSNMPExtensionGroup -- hm2AgentRoutingSNMPExtensionGroup OBJECT IDENTIFIER ::= { hm2PlatformRouting 280 } hm2AgentIpHelperTableFullErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The maximum number of IP helper entries has been reached" ::= { hm2AgentRoutingSNMPExtensionGroup 1 } hm2AgentIpHelperInvalidServerAddrErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Invalid IP server address." ::= { hm2AgentRoutingSNMPExtensionGroup 2 } hm2AgentRouterOspfDependenciesNotMet OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot modify OSPF admin state on this interface. Set primary IP address." ::= { hm2AgentRoutingSNMPExtensionGroup 3 } hm2AgentRouterOspfRangeTableFullErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The maximum number of area-range entries has been reached." ::= { hm2AgentRoutingSNMPExtensionGroup 4 } hm2AgentRouterOspfVirtNbrTableFullErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The maximum number of virtual neighbor entries has been reached." ::= { hm2AgentRoutingSNMPExtensionGroup 5 } hm2AgentRouterRIPDependenciesNotMet OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot modify RIP admin state on this interface. Set primary IP address." ::= { hm2AgentRoutingSNMPExtensionGroup 8 } hm2AgentIpHelperInvalidUdpPortErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Invalid UDP port." ::= { hm2AgentRoutingSNMPExtensionGroup 9 } hm2AgentStaticNeighbourTableFullErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Static Neighbour Table is full." ::= { hm2AgentRoutingSNMPExtensionGroup 10 } hm2AgentSecondaryAddrNoPrimaryErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot add the secondary IP address because the interface has no primary IP address." ::= { hm2AgentRoutingSNMPExtensionGroup 11 } hm2AgentSecondaryAddrDifferentPrimaryErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The secondary IP address must be different from the primary IP address." ::= { hm2AgentRoutingSNMPExtensionGroup 12 } hm2AgentSecondaryAddrWrongIpClassErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The network number of the secondary IP address is not valid to be used on a routing interface." ::= { hm2AgentRoutingSNMPExtensionGroup 13 } hm2AgentSecondaryAddrWrongSubnetErrorReturn OBJECT-IDENTITY STATUS obsolete DESCRIPTION "All IP addresses on the interface must be from different subnets." ::= { hm2AgentRoutingSNMPExtensionGroup 14 } hm2AgentSecondaryAddrMaxIntfEntriesErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The maximum number of secondary IP addresses on the interface has been reached." ::= { hm2AgentRoutingSNMPExtensionGroup 15 } hm2AgentSecondaryAddrMaxSystemEntriesErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The maximum number of IP addresses on the system has been reached." ::= { hm2AgentRoutingSNMPExtensionGroup 16 } hm2AgentSecondaryAddrStaticRouteErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The secondary IP address is same as the next hop address of a static route." ::= { hm2AgentRoutingSNMPExtensionGroup 17 } hm2AgentSecondaryAddrStaticARPErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The secondary IP address is same as a static ARP entry." ::= { hm2AgentRoutingSNMPExtensionGroup 18 } hm2AgentSecondaryAddrAbsentEntryErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The secondary IP address is not configured on the interface." ::= { hm2AgentRoutingSNMPExtensionGroup 19 } hm2AgentPrimaryAddrWrongIpClassErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The primary IP address is out of the allowed IP class." ::= { hm2AgentRoutingSNMPExtensionGroup 20 } hm2AgentPrimaryAddrConflictErrorReturn OBJECT-IDENTITY STATUS obsolete DESCRIPTION "The primary IP address conflicts with another IP address on a routing interface." ::= { hm2AgentRoutingSNMPExtensionGroup 21 } hm2AgentPrimaryAddrStaticRouteErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The primary IP address is same as the next hop address of a static route." ::= { hm2AgentRoutingSNMPExtensionGroup 22 } hm2AgentPrimaryAddrStaticARPErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The primary IP address is same as a static ARP entry." ::= { hm2AgentRoutingSNMPExtensionGroup 23 } hm2AgentPrimaryAddrExistingSecondaryErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The primary IP address cannot be changed because the interface has secondary IP addresses configured." ::= { hm2AgentRoutingSNMPExtensionGroup 24 } hm2AgentPrimaryAddrNetworkConflictErrorReturn OBJECT-IDENTITY STATUS obsolete DESCRIPTION "The primary IP address conflicts with the management IP address." ::= { hm2AgentRoutingSNMPExtensionGroup 25 } hm2AgentPrimaryAddrRoutingTableFullErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The primary IP address cannot be added because there are no free entries in the routing table." ::= { hm2AgentRoutingSNMPExtensionGroup 26 } hm2AgentDstAddrHostBitSetErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The route cannot be added. Host bits must not be set in the destination. Network address is {0}." ::= { hm2AgentRoutingSNMPExtensionGroup 27 } hm2AgentSamePrefRouteErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Route cannot be added because reject route and next hop route cannot share the same preference." ::= { hm2AgentRoutingSNMPExtensionGroup 28 } hm2AgentVrrpAssoIpAddrRowStatusInconsistentAddress OBJECT-IDENTITY STATUS current DESCRIPTION "The virtual address does not matching the current interface address configuration." ::= { hm2AgentRoutingSNMPExtensionGroup 29 } hm2AgentVrrpAssoIpAddrRowStatusInvalidAddress OBJECT-IDENTITY STATUS current DESCRIPTION "The virtual address is not valid with the current interface address configuration." ::= { hm2AgentRoutingSNMPExtensionGroup 30 } hm2AgentVrrpAssoIpAddrRowStatusUnknownVRID OBJECT-IDENTITY STATUS current DESCRIPTION "Unknown virtual router id." ::= { hm2AgentRoutingSNMPExtensionGroup 31 } hm2AgentSwitchIpRouterDiscMinMaxAdvtIntErrorRtrn OBJECT-IDENTITY STATUS current DESCRIPTION "Min advertisement interval is bigger then max advertisement interval." ::= { hm2AgentRoutingSNMPExtensionGroup 32 } hm2AgentSwitchIpRouterDiscLifeTimeMaxAdvIntErrorRtrn OBJECT-IDENTITY STATUS current DESCRIPTION "Max advertisement interval is bigger then advertisement life time." ::= { hm2AgentRoutingSNMPExtensionGroup 33 } hm2AgentSwitchIpIcmpRateLimitExceedingRatioErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Rate limit ratio exceeds 100 packets per second." ::= { hm2AgentRoutingSNMPExtensionGroup 34 } hm2AgentRouterOspfMaxAreaErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The maximum number of OSPF areas has been reached." ::= { hm2AgentRoutingSNMPExtensionGroup 35 } hm2AgentospfRouterIdChange OBJECT-IDENTITY STATUS current DESCRIPTION "OSPF must be disabled to change the router ID." ::= { hm2AgentRoutingSNMPExtensionGroup 36 } hm2AgentOspfRedistDistList OBJECT-IDENTITY STATUS current DESCRIPTION "Please add a redistribute list." ::= { hm2AgentRoutingSNMPExtensionGroup 37 } hm2AgentOspfDefaultAreaDeleteErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "The default area cannot be deleted." ::= { hm2AgentRoutingSNMPExtensionGroup 38 } hm2AgentLocalArpDeleteErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Local ARP entries cannot be deleted." ::= { hm2AgentRoutingSNMPExtensionGroup 39 } hm2AgentDynamicVlanRoutingErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Dynamic VLANs cannot be used for routing interfaces." ::= { hm2AgentRoutingSNMPExtensionGroup 40 } hm2AgentVlanUnawareRoutingErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Routing cannot be used together with the vlan unaware mode." ::= { hm2AgentRoutingSNMPExtensionGroup 41 } END