-- F10-FIPSNOOPING-MIB.my: FIP Snooping mib -- Dell Networking OS FIP Snooping Proprietary MIB Definition -- This SNMP Management Information Specification -- explains the proprietary MIB implemented for the FIP Snooping Feature. F10-FIPSNOOPING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter32, Integer32 FROM SNMPv2-SMI MacAddress, DateAndTime FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB dot1qVlanIndex FROM Q-BRIDGE-MIB f10Mgmt FROM FORCE10-SMI; dF10FipSnooping MODULE-IDENTITY LAST-UPDATED "201112080000Z" -- Dec 8, 2011 ORGANIZATION "Dell Inc." CONTACT-INFO "http://www.force10networks.com/support" DESCRIPTION "The Dell Networking OS Private MIB for FIP Snooping feature. This MIB module is for configuring FIP snooping related objects and monitoring related FCoE sessions. Terminologies used in this MIB are defined by the T11 FCoE standard. Refer to www.t11.org. This MIB also supports configuration of the following objects: - Port role configuration to identify FCF facing or FCF connected interface - FC-MAP value used by the FCF operating in FPMA mode " REVISION "201112080000Z" -- Dec 8, 2011 DESCRIPTION "Initial version of this MIB module." ::= { f10Mgmt 22 } --********************************************************************* -- FIP Snooping related objects used to configure FIP Snooping -- objects on Ethernet bridges connected to ENodes --********************************************************************* --********************************************************************* -- dF10FIPSCfgGroup --********************************************************************* dF10FIPSCfgGroup OBJECT IDENTIFIER ::= { dF10FipSnooping 1 } dF10FIPSAdminMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This enables or disables FIP Snooping on the system." DEFVAL { disable } ::= { dF10FIPSCfgGroup 1 } dF10FIPSFCMAP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the FC-MAP value on the system. Default value is 0x0EFC00." DEFVAL { "0x0EFC00" } ::= { dF10FIPSCfgGroup 2 } dF10FIPSStatsClear OBJECT-TYPE SYNTAX INTEGER { clear(0), ignore(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all FIP Snooping statistics in the system. This is write-only value. It always returns '0' on request." ::= { dF10FIPSCfgGroup 5 } --********************************************************************* -- dF10FIPSVlanCfgTable -- FIP Snooping VLAN Configuration table -- Configure FC-MAP, enable/disable --********************************************************************* dF10FIPSVlanCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSVlanCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the FIP Snooping Vlan configuration entries." ::= { dF10FIPSCfgGroup 3 } dF10FIPSVlanCfgEntry OBJECT-TYPE SYNTAX DF10FIPSVlanCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a FIP Snooping Vlan." INDEX { dot1qVlanIndex } ::= { dF10FIPSVlanCfgTable 1 } DF10FIPSVlanCfgEntry ::= SEQUENCE { dF10FIPSVlanAdminMode INTEGER, dF10FIPSVlanFCMAP OCTET STRING, dF10FIPSVlanStatsClear INTEGER } dF10FIPSVlanAdminMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This enables or disables FIP Snooping on a selected Vlan interface." DEFVAL { disable } ::= { dF10FIPSVlanCfgEntry 1 } dF10FIPSVlanFCMAP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the FC-MAP value associated with the FIP snooping Vlan. Default value is 0x0EFC00." DEFVAL { "0x0EFC00" } ::= { dF10FIPSVlanCfgEntry 2 } dF10FIPSVlanStatsClear OBJECT-TYPE SYNTAX INTEGER { clear(0), ignore(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear FIP Snooping statistics on this Vlan. This is write-only value. It always returns '0' on request" ::= { dF10FIPSVlanCfgEntry 3 } --********************************************************************* -- dF10FIPSIntfTable -- FIP Snooping Interface Configuration table -- Configure trusted FCF interface mode --********************************************************************* dF10FIPSIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table providing configuration for trusted FCF interface mode." ::= { dF10FIPSCfgGroup 4 } dF10FIPSIntfEntry OBJECT-TYPE SYNTAX DF10FIPSIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCF trust mode configuration for an interface." INDEX { ifIndex } ::= { dF10FIPSIntfTable 1 } DF10FIPSIntfEntry::= SEQUENCE { dF10FIPSIntfPortModeFcf INTEGER, dF10FIPSIntfStatsClear INTEGER } dF10FIPSIntfPortModeFcf OBJECT-TYPE SYNTAX INTEGER { disable(0), fcf(1), fcoetrusted(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets/disables FCF port mode on an interface." DEFVAL { disable } ::= { dF10FIPSIntfEntry 2 } dF10FIPSIntfStatsClear OBJECT-TYPE SYNTAX INTEGER { clear(0), ignore(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear FIP Snooping statistics on this interface. This is write-only value. It always returns '0' on request" ::= { dF10FIPSIntfEntry 3 } --********************************************************************* -- FIP Snooping related objects used to monitor FIP Snooping -- sessions, ENodes and FCFs on Ethernet bridges connected to ENodes --********************************************************************* --********************************************************************* -- dF10FIPSStatusGroup --********************************************************************* dF10FIPSStatusGroup OBJECT IDENTIFIER ::= { dF10FipSnooping 2 } ---------------------------------------------------------------------------- -- FIP Snooping Sesh Table ---------------------------------------------------------------------------- dF10FIPSSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for FIP Snooping Session entries." ::= { dF10FIPSStatusGroup 1 } dF10FIPSSessionEntry OBJECT-TYPE SYNTAX DF10FIPSSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents an entry in FIP Snooping session table." INDEX { dF10FIPSSessionVlanIndex, dF10FIPSSessionFCFMacAddr, dF10FIPSSessionENodeMacAddr, dF10FIPSSessionLoginType, dF10FIPSFCoEMacAddr, dF10FIPSSessionTentativeIndex, dF10FIPSSessionFCID} ::={ dF10FIPSSessionTable 1} DF10FIPSSessionEntry ::= SEQUENCE { dF10FIPSSessionVlanIndex Unsigned32, dF10FIPSSessionFCFMacAddr MacAddress, dF10FIPSSessionENodeMacAddr MacAddress, dF10FIPSSessionLoginType INTEGER, dF10FIPSFCoEMacAddr MacAddress, dF10FIPSSessionTentativeIndex Unsigned32, dF10FIPSSessionFCID OCTET STRING, dF10FIPSSessionENodeIntf Unsigned32, dF10FIPSSessionFCFIntf Unsigned32, dF10FIPSSessionTime DateAndTime, dF10FIPSSessionExpiryTime Integer32, dF10FIPSSessionState OCTET STRING } dF10FIPSSessionVlanIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Vlan in which the session is established." ::={dF10FIPSSessionEntry 1 } dF10FIPSSessionFCFMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the FCF to which the session is established." ::={ dF10FIPSSessionEntry 2 } dF10FIPSSessionENodeMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the ENode from which the session originated." ::={ dF10FIPSSessionEntry 3 } dF10FIPSSessionLoginType OBJECT-TYPE SYNTAX INTEGER { flogi(0), fdisc(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of login requested by ENode." ::= { dF10FIPSSessionEntry 4 } dF10FIPSFCoEMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address assigned to the VN_Port on the ENode." ::={ dF10FIPSSessionEntry 5 } dF10FIPSSessionTentativeIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to the tentavtive session." ::={ dF10FIPSSessionEntry 6 } dF10FIPSSessionFCID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) -- (00:ee:dd) MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCID created by FCF for this virtual session." ::={ dF10FIPSSessionEntry 7 } dF10FIPSSessionENodeIntf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface to which the ENode is connected." ::={ dF10FIPSSessionEntry 8 } dF10FIPSSessionFCFIntf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface on which the FCF is discovered." ::={ dF10FIPSSessionEntry 9 } dF10FIPSSessionTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed after this successful virtual session is established by ENode with FCF." ::={ dF10FIPSSessionEntry 10 } dF10FIPSSessionExpiryTime OBJECT-TYPE SYNTAX Integer32 (0..450) MAX-ACCESS read-only STATUS current DESCRIPTION "This is virtual connection/session expiry interval. This is used to monitor the status of the session. Session entry is removed when the value reaches 0. This value is reset to 450 secs (5*90secs) every time an associated VN_Port FKA is received from the ENode. This is ignored (marked as NA) if the D-bit is set to one in the FCF Discovery Advertisements." ::={ dF10FIPSSessionEntry 11 } dF10FIPSSessionState OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the virtual session. The state is displayed as TENTATIVE during the process of ENode login to FCF (using FLOGI or FDESC). It displays ACTIVE after ENode and FCF establish a successful virtual connection." ::={ dF10FIPSSessionEntry 12 } ---------------------------------------------------------------------------- -- FIP Snooping Enode Information ---------------------------------------------------------------------------- dF10FIPSENodeTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSENodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for FIP Snooping discovered ENode entries." ::= { dF10FIPSStatusGroup 2 } dF10FIPSENodeEntry OBJECT-TYPE SYNTAX DF10FIPSENodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents an entry in FIP Snooping ENodes table." INDEX { dF10FIPSENodeVlanIndex, dF10FIPSENodeMacAddr } ::={ dF10FIPSENodeTable 1} DF10FIPSENodeEntry ::= SEQUENCE { dF10FIPSENodeVlanIndex Unsigned32, dF10FIPSENodeMacAddr MacAddress, dF10FIPSENodeIntf Unsigned32, dF10FIPSENodeNameID OCTET STRING, dF10FIPSENodeMaxFCoESize Unsigned32, dF10FIPSENodeConnectedFCFsCount Unsigned32, dF10FIPSENodeActiveSessions Unsigned32, dF10FIPSENodeWaitingSessions Unsigned32, dF10FIPSENodeRejectedSessions Unsigned32, dF10FIPSENodeTimeSinceDiscovered DateAndTime } dF10FIPSENodeVlanIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Vlan in which the enode is present." ::={dF10FIPSENodeEntry 1 } dF10FIPSENodeMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the ENode." ::={dF10FIPSENodeEntry 2 } dF10FIPSENodeIntf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface to which the ENode is connected." ::={dF10FIPSENodeEntry 3 } dF10FIPSENodeNameID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Name ID of the ENode." ::={dF10FIPSENodeEntry 4 } dF10FIPSENodeMaxFCoESize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum FCoE PDU size the ENode MAC intends to use for FCoE traffic. This is equivalent to the maximum Ethernet frame payload the ENode intends to send." ::={dF10FIPSENodeEntry 5 } dF10FIPSENodeConnectedFCFsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of FCFs to which this ENode has FCoE virtual connections established." ::={dF10FIPSENodeEntry 6 } dF10FIPSENodeActiveSessions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of FCoE virtual connections successfully established by the ENode with FCFs." ::={dF10FIPSENodeEntry 7 } dF10FIPSENodeWaitingSessions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of FCoE virtual connections initiated by ENode and waiting for FCF acceptance." ::={dF10FIPSENodeEntry 8 } dF10FIPSENodeRejectedSessions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of virtual connections originted from ENode which are rejected by FCFs." ::={dF10FIPSENodeEntry 9 } dF10FIPSENodeTimeSinceDiscovered OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed since the ENode is discovered." ::={dF10FIPSENodeEntry 10 } ------------------------------------------------------------------------------ -- FCF {Key: Vlan, FCF-MAC only} ---------------------------------------------------------------------------- dF10FIPSFCFTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSFCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for FIP Snooping discovered FCF entries." ::= { dF10FIPSStatusGroup 3 } dF10FIPSFCFEntry OBJECT-TYPE SYNTAX DF10FIPSFCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents an entry in FIP Snooping FCFs table." INDEX { dF10FIPSFCFVlanIndex, dF10FIPSFCFMacAddr } ::={ dF10FIPSFCFTable 1} DF10FIPSFCFEntry ::= SEQUENCE { dF10FIPSFCFVlanIndex Unsigned32, dF10FIPSFCFMacAddr MacAddress, dF10FIPSFCFIntf Unsigned32, dF10FIPSFCFNameID OCTET STRING, dF10FIPSFCFFabricName OCTET STRING, dF10FIPSFCFAddressingMode INTEGER, dF10FIPSFCFPriority Integer32, dF10FIPSFCFDbit Integer32, dF10FIPSFCFIsAvailableForLogin Integer32, dF10FIPSFCFConfiguredFKA Integer32, dF10FIPSFCFTimeSinceDiscovered DateAndTime, dF10FIPSFCFConnectedENodesCount Unsigned32, dF10FIPSFCFSessions Unsigned32, dF10FIPSFCFExpiryTime Unsigned32 } dF10FIPSFCFVlanIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Vlan in which the FCF is present." ::={dF10FIPSFCFEntry 1 } dF10FIPSFCFMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the FCF." ::={ dF10FIPSFCFEntry 2 } dF10FIPSFCFIntf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inteface on which FCF is discovered." ::={ dF10FIPSFCFEntry 3 } dF10FIPSFCFNameID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Name Identifer of the FCF." ::={ dF10FIPSFCFEntry 4 } dF10FIPSFCFFabricName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Fabric Name identifying the Fabric." ::={ dF10FIPSFCFEntry 5 } dF10FIPSFCFAddressingMode OBJECT-TYPE SYNTAX INTEGER { fpma(1), spma(2), both(3) -- FPMA and SPMA } MAX-ACCESS read-only STATUS current DESCRIPTION "Addressing mode(s) supported by the FCF." ::={dF10FIPSFCFEntry 6 } dF10FIPSFCFPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the priority assigned to FCF. The highest priority value is 0 and the lowest priority value is 255." ::={ dF10FIPSFCFEntry 7 } dF10FIPSFCFDbit OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "This reflects the value of D bit value provided by the most recently received Discovery Advertisement from the FCF." ::={dF10FIPSFCFEntry 8 } dF10FIPSFCFIsAvailableForLogin OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "This reflects the value of the A bit provided by the most recently received Discovery Advertisement from the FCF. This provides the information that the transmitting FCF is available for FIP FLOGI/FDISC from ENodes. This is informational and shall have no effect on existing logins." ::={dF10FIPSFCFEntry 9 } dF10FIPSFCFConfiguredFKA OBJECT-TYPE SYNTAX Integer32 (1..450) MAX-ACCESS read-only STATUS current DESCRIPTION "FIP keepalive interval (FKA_ADV_PERIOD) in seconds configured on the FCF multiplied by five. For example, if the FKA_ADV period configured on the FCF is 80 seconds, the value of this field is 400 seconds." ::={ dF10FIPSFCFEntry 10 } dF10FIPSFCFTimeSinceDiscovered OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed since the FCF is discovered." ::={ dF10FIPSFCFEntry 11 } dF10FIPSFCFConnectedENodesCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ENodes to which FCF has FCoE virtual connections established." ::={ dF10FIPSFCFEntry 12 } dF10FIPSFCFSessions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of FCoE virtual connections successfully established by the ENodes with this FCF." ::={ dF10FIPSFCFEntry 13 } dF10FIPSFCFExpiryTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the timer value in seconds to monitor the status of the FCF. FCF entry and all its associated virtual sessions will be removed when the value reaches 0. This value is reset to 'Configured FKA-ADV' every time a Discovery Advertisement is received from the FCF-MAC." ::={ dF10FIPSFCFEntry 14 } --********************************************************************* -- FIP Snooping related objects used to monitor FIP Snooping -- statistics on Ethernet bridges connected to ENodes --********************************************************************* --********************************************************************* -- dF10FIPSStatisticsGroup --********************************************************************* dF10FIPSStatisticsGroup OBJECT IDENTIFIER ::= { dF10FipSnooping 3 } -- ------------------------------------------------------------- -- Per FCoE VLAN Statistics Table -- ------------------------------------------------------------- dF10FIPSVlanStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSVlanStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification." ::= { dF10FIPSStatisticsGroup 1 } dF10FIPSVlanStatsEntry OBJECT-TYPE SYNTAX DF10FIPSVlanStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FIP Snooping control traffic statistics of a VLAN." INDEX { dot1qVlanIndex } ::= { dF10FIPSVlanStatsTable 1 } DF10FIPSVlanStatsEntry ::= SEQUENCE { dF10FIPSVlanVlanRequests Counter32, dF10FIPSVlanVlanNotifications Counter32, dF10FIPSVlanMCDiscSolicits Counter32, dF10FIPSVlanUnicastDiscSolicits Counter32, dF10FIPSVlanFLogis Counter32, dF10FIPSVlanFDiscs Counter32, dF10FIPSVlanFLogouts Counter32, dF10FIPSVlanVnPortKeepAlives Counter32, dF10FIPSVlanMCDiscAdverts Counter32, dF10FIPSVlanUnicastDiscAdverts Counter32, dF10FIPSVlanFLogiAccepts Counter32, dF10FIPSVlanFLogiRejects Counter32, dF10FIPSVlanFDiscAccepts Counter32, dF10FIPSVlanFDiscRejects Counter32, dF10FIPSVlanFLogoutAccepts Counter32, dF10FIPSVlanFLogoutRejects Counter32, dF10FIPSVlanClearVirtLinks Counter32, dF10FIPSVlanVnPortSeshTimeouts Counter32, dF10FIPSVlanFcfDiscAdvTimeouts Counter32, dF10FIPSVlanSeshFailsDueToHwCfg Counter32, dF10FIPSVlanSeshDenyFcfLmtRch Counter32, dF10FIPSVlanSeshDenyENodeLmtRch Counter32, dF10FIPSVlanSeshDenySysLmtRch Counter32 } dF10FIPSVlanVlanRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VLAN Request messages received on the VLAN." ::={ dF10FIPSVlanStatsEntry 1 } dF10FIPSVlanVlanNotifications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VLAN Notification messages received on the VLAN." ::={ dF10FIPSVlanStatsEntry 2 } dF10FIPSVlanMCDiscSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Multicast Discovery Solicitation messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 3 } dF10FIPSVlanUnicastDiscSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Unicast Discovery Solicitation messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 4 } dF10FIPSVlanFLogis OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Login messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 5 } dF10FIPSVlanFDiscs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Discovery Login messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 6 } dF10FIPSVlanFLogouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logout messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 7 } dF10FIPSVlanVnPortKeepAlives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VN_Port keep alive messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 8 } dF10FIPSVlanMCDiscAdverts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Multicast Discovery Advertisement messages snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 9 } dF10FIPSVlanUnicastDiscAdverts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Unicast Discovery Advertisement packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 10 } dF10FIPSVlanFLogiAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Login accept packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 11 } dF10FIPSVlanFLogiRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Login reject packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 12 } dF10FIPSVlanFDiscAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Discovery accept packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 13 } dF10FIPSVlanFDiscRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Discovery reject packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 14 } dF10FIPSVlanFLogoutAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logouts accept packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 15 } dF10FIPSVlanFLogoutRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logouts reject packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 16 } dF10FIPSVlanClearVirtLinks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Clear Virtual Link request packets snooped in the VLAN." ::={ dF10FIPSVlanStatsEntry 17 } dF10FIPSVlanVnPortSeshTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of virtual sessions removed due to session timer expiry in the VLAN." ::={ dF10FIPSVlanStatsEntry 18 } dF10FIPSVlanFcfDiscAdvTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ACTIVE sessions timed out due to Discovery Advertisements timer expiry from FCFs in the VLAN." ::={ dF10FIPSVlanStatsEntry 19 } dF10FIPSVlanSeshFailsDueToHwCfg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions in the VLAN that failed while configuring the hardware." ::={ dF10FIPSVlanStatsEntry 20 } dF10FIPSVlanSeshDenyFcfLmtRch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions that are denied to be created for the new FCF as the number of FCFs reached the maximum allowed limit supported in the VLAN." ::={ dF10FIPSVlanStatsEntry 21 } dF10FIPSVlanSeshDenyENodeLmtRch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions that are denied to be created for the new ENode as the number of ENodes reached the maximum allowed limit supported by the system." ::={ dF10FIPSVlanStatsEntry 22 } dF10FIPSVlanSeshDenySysLmtRch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of session create requests denied as the number of sessions reached the maximum allowed limit supported by the system." ::={ dF10FIPSVlanStatsEntry 23 } -- ------------------------------------------------------------- -- Per Interface Statistics Table -- ------------------------------------------------------------- dF10FIPSIntfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DF10FIPSIntfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification." ::= { dF10FIPSStatisticsGroup 2 } dF10FIPSIntfStatsEntry OBJECT-TYPE SYNTAX DF10FIPSIntfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FIP Snooping control traffic statistics on this interface." INDEX { ifIndex } ::= { dF10FIPSIntfStatsTable 1 } DF10FIPSIntfStatsEntry ::= SEQUENCE { dF10FIPSIntfVlanRequests Counter32, dF10FIPSIntfVlanNotifications Counter32, dF10FIPSIntfMCDiscSolicits Counter32, dF10FIPSIntfUnicastDiscSolicits Counter32, dF10FIPSIntfFLogis Counter32, dF10FIPSIntfFDiscs Counter32, dF10FIPSIntfFLogouts Counter32, dF10FIPSIntfVnPortKeepAlives Counter32, dF10FIPSIntfMCDiscAdverts Counter32, dF10FIPSIntfUnicastDiscAdverts Counter32, dF10FIPSIntfFLogiAccepts Counter32, dF10FIPSIntfFLogiRejects Counter32, dF10FIPSIntfFDiscAccepts Counter32, dF10FIPSIntfFDiscRejects Counter32, dF10FIPSIntfFLogoutAccepts Counter32, dF10FIPSIntfFLogoutRejects Counter32, dF10FIPSIntfClearVirtLinks Counter32, dF10FIPSIntfVnPortSeshTimeouts Counter32, dF10FIPSIntfFcfDiscAdvTimeouts Counter32, dF10FIPSIntfSeshFailsDueToHwCfg Counter32, dF10FIPSIntfSeshDenyFcfLmtRch Counter32, dF10FIPSIntfSeshDenyENodeLmtRch Counter32, dF10FIPSIntfSeshDenySysLmtRch Counter32 } dF10FIPSIntfVlanRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VLAN Request messages received on the interface." ::={ dF10FIPSIntfStatsEntry 1 } dF10FIPSIntfVlanNotifications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VLAN Notification messages received on the interface." ::={ dF10FIPSIntfStatsEntry 2 } dF10FIPSIntfMCDiscSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Multicast Discovery Solicitation messages received on the interface." ::={ dF10FIPSIntfStatsEntry 3 } dF10FIPSIntfUnicastDiscSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Unicast Discovery Solicitation messages received on the interface." ::={ dF10FIPSIntfStatsEntry 4 } dF10FIPSIntfFLogis OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logins received on the interface." ::={ dF10FIPSIntfStatsEntry 5 } dF10FIPSIntfFDiscs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Discovery logins received on the interface." ::={ dF10FIPSIntfStatsEntry 6 } dF10FIPSIntfFLogouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logouts received on the interface." ::={ dF10FIPSIntfStatsEntry 7 } dF10FIPSIntfVnPortKeepAlives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of VN_Port keepalive messages received on the interface." ::={ dF10FIPSIntfStatsEntry 8 } dF10FIPSIntfMCDiscAdverts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Multicast Discovery Advertisement messages received on the interface." ::={ dF10FIPSIntfStatsEntry 9 } dF10FIPSIntfUnicastDiscAdverts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Unicast Discovery Advertisement messages received on the interface." ::={ dF10FIPSIntfStatsEntry 10 } dF10FIPSIntfFLogiAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Login accept messages received on the interface." ::={ dF10FIPSIntfStatsEntry 11 } dF10FIPSIntfFLogiRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Login reject messages received on the interface." ::={ dF10FIPSIntfStatsEntry 12 } dF10FIPSIntfFDiscAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Discovery accept messages received on the interface." ::={ dF10FIPSIntfStatsEntry 13 } dF10FIPSIntfFDiscRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Discovery reject messages received on the interface." ::={ dF10FIPSIntfStatsEntry 14 } dF10FIPSIntfFLogoutAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logout accept messages received on the interface." ::={ dF10FIPSIntfStatsEntry 15 } dF10FIPSIntfFLogoutRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Fabric Logout reject messages received on the interface." ::={ dF10FIPSIntfStatsEntry 16 } dF10FIPSIntfClearVirtLinks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Clear Virtual Links messages received on the interface." ::={ dF10FIPSIntfStatsEntry 17 } dF10FIPSIntfVnPortSeshTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Virtual sessions removed due to session timer expiry." ::={ dF10FIPSIntfStatsEntry 18 } dF10FIPSIntfFcfDiscAdvTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ACTIVE sessions timed out due to Discovery Advertisements timer expiry from FCFs on this interface." ::={ dF10FIPSIntfStatsEntry 19 } dF10FIPSIntfSeshFailsDueToHwCfg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions on this interface that failed while configuring the hardware." ::={ dF10FIPSIntfStatsEntry 20 } dF10FIPSIntfSeshDenyFcfLmtRch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions that are denied to be created on this interface form a new FCF as the number of FCFs count reached the maximum allowed limit in the system." ::={ dF10FIPSIntfStatsEntry 21 } dF10FIPSIntfSeshDenyENodeLmtRch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions that are denied to be created on this interface form a new ENode/host as the number of ENodes/hosts count reached the maximum allowed limit in the system." ::={ dF10FIPSIntfStatsEntry 22 } dF10FIPSIntfSeshDenySysLmtRch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sessions that are denied to be created as the number of sessions count reached the maximum allowed limit supported in the system. This is a global counter." ::={ dF10FIPSIntfStatsEntry 23 } --************************************************************************************* -- Traps --************************************************************************************** dF10FIPSNotifications OBJECT IDENTIFIER ::= { dF10FipSnooping 4 } dF10FIPSTraps OBJECT IDENTIFIER ::= { dF10FIPSNotifications 0 } dF10FIPSTrapObjects OBJECT IDENTIFIER ::= { dF10FIPSNotifications 1 } dF10FIPSTrapVlanIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object refers to the Vlan Index for which the FIP Snooping trap is being sent." ::= { dF10FIPSTrapObjects 1 } dF10FIPSTrapMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object refers to the FCF or Enode MAC Address for which the FIP Snooping trap is being sent." ::= { dF10FIPSTrapObjects 2 } dF10MaxFcfsInVlanLmtRchTrap NOTIFICATION-TYPE OBJECTS {dF10FIPSTrapVlanIndex} STATUS current DESCRIPTION "This trap is sent when number of FCFs reached maximum allowed limit in VLAN." ::= { dF10FIPSTraps 1 } dF10MaxENodesLmtRchTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap is sent when number of ENodes reached maximum allowed limit in the system." ::= { dF10FIPSTraps 2 } dF10MaxSessionLmtRchTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap is sent when number of sessions reached maximum allowed limit in the system." ::= { dF10FIPSTraps 3 } dF10FcfDroppedTrap NOTIFICATION-TYPE OBJECTS {dF10FIPSTrapVlanIndex, dF10FIPSFCFIntf, dF10FIPSTrapMacAddr} STATUS current DESCRIPTION "This trap is sent when a new FCF discovered (Discovery Advertisement is received from FCF) is dropped, as the maximum allowed FCFs limit in a VLAN is already reached." ::= { dF10FIPSTraps 4 } dF10ENodeDroppedTrap NOTIFICATION-TYPE OBJECTS {dF10FIPSTrapVlanIndex, dF10FIPSENodeIntf, dF10FIPSTrapMacAddr} STATUS current DESCRIPTION "This trap is sent when a new ENode discovered is dropped, as the maximum allowed ENodes limit in the system is already reached." ::= { dF10FIPSTraps 5 } dF10SessionRequestDroppedTrap NOTIFICATION-TYPE OBJECTS {dF10FIPSTrapVlanIndex, dF10FIPSENodeIntf, dF10FIPSTrapMacAddr} STATUS current DESCRIPTION "This trap is sent when a new session request received is dropped, as the maximum allowed session limit in system is already reached." ::= { dF10FIPSTraps 6 } dF10AclInstallationFailureTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap is sent when there is a problem in installing the ACL entries due to no space or hardware failure" ::= { dF10FIPSTraps 7 } --****************************************************************************** -- Conformance information --****************************************************************************** dF10FIPSMibConformance OBJECT IDENTIFIER ::= { dF10FipSnooping 5 } dF10FIPSMibCompliances OBJECT IDENTIFIER ::= { dF10FIPSMibConformance 1 } dF10FIPSMibGroups OBJECT IDENTIFIER ::= { dF10FIPSMibConformance 2 } dF10FIPSMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Dell Networking OS product which implement the Dell Networking OS FIP Snooping MIB. " MODULE MANDATORY-GROUPS { dF10FIPSCfgObjectGroup, dF10FIPSVlanCfgObjectGroup, dF10FIPSIntfObjectGroup, dF10FIPSSessionObjectGroup, dF10FIPSENodeObjectGroup, dF10FIPSFCFObjectGroup, dF10FIPSVlanStatsObjectGroup, dF10FIPSIntfStatsObjectGroup, dF10FIPSTrapsObjectGroup, dF10FIPSTrapObjectsGroup } ::= { dF10FIPSMibCompliances 1 } dF10FIPSCfgObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSAdminMode, dF10FIPSFCMAP, dF10FIPSStatsClear } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS system information." ::= { dF10FIPSMibGroups 1 } dF10FIPSVlanCfgObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSVlanAdminMode, dF10FIPSVlanFCMAP, dF10FIPSVlanStatsClear } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS vlan information." ::= { dF10FIPSMibGroups 2 } dF10FIPSIntfObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSIntfPortModeFcf, dF10FIPSIntfStatsClear } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS interface information." ::= { dF10FIPSMibGroups 3 } dF10FIPSSessionObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSSessionENodeIntf, dF10FIPSSessionFCFIntf, dF10FIPSSessionTime, dF10FIPSSessionExpiryTime, dF10FIPSSessionState, dF10FIPSIntfStatsClear } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS Session information." ::= { dF10FIPSMibGroups 4 } dF10FIPSENodeObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSENodeIntf, dF10FIPSENodeNameID, dF10FIPSENodeMaxFCoESize, dF10FIPSENodeConnectedFCFsCount, dF10FIPSENodeActiveSessions, dF10FIPSENodeWaitingSessions, dF10FIPSENodeRejectedSessions, dF10FIPSENodeTimeSinceDiscovered } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS ENode information." ::= { dF10FIPSMibGroups 5 } dF10FIPSFCFObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSFCFIntf, dF10FIPSFCFNameID, dF10FIPSFCFFabricName, dF10FIPSFCFAddressingMode, dF10FIPSFCFPriority, dF10FIPSFCFDbit, dF10FIPSFCFIsAvailableForLogin, dF10FIPSFCFConfiguredFKA, dF10FIPSFCFTimeSinceDiscovered, dF10FIPSFCFConnectedENodesCount, dF10FIPSFCFSessions, dF10FIPSFCFExpiryTime } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS FCF information." ::= { dF10FIPSMibGroups 6 } dF10FIPSVlanStatsObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSVlanVlanRequests, dF10FIPSVlanVlanNotifications, dF10FIPSVlanMCDiscSolicits, dF10FIPSVlanUnicastDiscSolicits, dF10FIPSVlanFLogis, dF10FIPSVlanFDiscs, dF10FIPSVlanFLogouts, dF10FIPSVlanVnPortKeepAlives, dF10FIPSVlanMCDiscAdverts, dF10FIPSVlanUnicastDiscAdverts, dF10FIPSVlanFLogiAccepts, dF10FIPSVlanFLogiRejects, dF10FIPSVlanFDiscAccepts, dF10FIPSVlanFDiscRejects, dF10FIPSVlanFLogoutAccepts, dF10FIPSVlanFLogoutRejects, dF10FIPSVlanClearVirtLinks, dF10FIPSVlanVnPortSeshTimeouts, dF10FIPSVlanFcfDiscAdvTimeouts, dF10FIPSVlanSeshFailsDueToHwCfg, dF10FIPSVlanSeshDenyFcfLmtRch, dF10FIPSVlanSeshDenyENodeLmtRch, dF10FIPSVlanSeshDenySysLmtRch } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS Vlan Statistics information." ::= { dF10FIPSMibGroups 7 } dF10FIPSIntfStatsObjectGroup OBJECT-GROUP OBJECTS { dF10FIPSIntfVlanRequests, dF10FIPSIntfVlanNotifications, dF10FIPSIntfMCDiscSolicits, dF10FIPSIntfUnicastDiscSolicits, dF10FIPSIntfFLogis, dF10FIPSIntfFDiscs, dF10FIPSIntfFLogouts, dF10FIPSIntfVnPortKeepAlives, dF10FIPSIntfMCDiscAdverts, dF10FIPSIntfUnicastDiscAdverts, dF10FIPSIntfFLogiAccepts, dF10FIPSIntfFLogiRejects, dF10FIPSIntfFDiscAccepts, dF10FIPSIntfFDiscRejects, dF10FIPSIntfFLogoutAccepts, dF10FIPSIntfFLogoutRejects, dF10FIPSIntfClearVirtLinks, dF10FIPSIntfVnPortSeshTimeouts, dF10FIPSIntfFcfDiscAdvTimeouts, dF10FIPSIntfSeshFailsDueToHwCfg, dF10FIPSIntfSeshDenyFcfLmtRch, dF10FIPSIntfSeshDenyENodeLmtRch, dF10FIPSIntfSeshDenySysLmtRch } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS Interface Statistics information." ::= { dF10FIPSMibGroups 8 } dF10FIPSTrapsObjectGroup NOTIFICATION-GROUP NOTIFICATIONS { dF10MaxFcfsInVlanLmtRchTrap, dF10MaxENodesLmtRchTrap, dF10MaxSessionLmtRchTrap, dF10FcfDroppedTrap, dF10ENodeDroppedTrap, dF10SessionRequestDroppedTrap, dF10AclInstallationFailureTrap } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS Trap information." ::= { dF10FIPSMibGroups 9 } dF10FIPSTrapObjectsGroup OBJECT-GROUP OBJECTS { dF10FIPSTrapVlanIndex, dF10FIPSTrapMacAddr } STATUS current DESCRIPTION "This group represents a collection of objects providing the FIPS Trap object information." ::= { dF10FIPSMibGroups 10 } END