-- ***************************************************************** -- QTECH-MPLS-LDP-MIB.mib: Qtech MPLS LDP MIB file -- -- MAY 2011, HongPeiYang -- -- Copyright (c) 2011 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-MPLS-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, IpAddress, Unsigned32, Gauge32, Counter32 FROM SNMPv2-SMI TruthValue, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ConfigStatus FROM QTECH-TC EnabledStatus FROM P-BRIDGE-MIB AreaID, Status, PositiveInteger, DesignatedRouterPriority, RouterID, HelloRange FROM OSPF-MIB InetAddressPrefixLength, InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB -- [RFC3291] SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411] MplsLdpIdentifier FROM MPLS-TC-STD-MIB -- [RFC3811] qtechMgmt FROM QTECH-SMI; qtechMplsLdpMIB MODULE-IDENTITY LAST-UPDATED "201105150000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech mpls ldp mibs." REVISION "201105150000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 99} qtechMplsLdpMIBObjects OBJECT IDENTIFIER ::= { qtechMplsLdpMIB 1 } --**************************************************************** qtechMplsLdpObjects OBJECT IDENTIFIER ::= { qtechMplsLdpMIBObjects 1 } qtechMplsLdpConformance OBJECT IDENTIFIER ::= { qtechMplsLdpMIBObjects 2 } --**************************************************************** -- MPLS LDP Objects --**************************************************************** qtechMplsLdpMplsGernalMibObjects OBJECT IDENTIFIER ::= { qtechMplsLdpObjects 1 } qtechMplsLdpConfigMibObjects OBJECT IDENTIFIER ::= { qtechMplsLdpObjects 2 } mplsLdpThreadName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "LDP Task Name." ::= { qtechMplsLdpMplsGernalMibObjects 1 } mplsLdpSessionUpCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total LDP session Operational count." ::= { qtechMplsLdpMplsGernalMibObjects 2 } mplsLdpSessionCreatCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total active LDP session number." ::= { qtechMplsLdpMplsGernalMibObjects 3 } mplsLdpSessionDownCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total tear down LDP session number." ::= { qtechMplsLdpMplsGernalMibObjects 4 } mplsLdpSessionDownCauseByInf OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of LDP sessions which are caused down by interface." ::= { qtechMplsLdpMplsGernalMibObjects 5 } qtechMplsLdpFecTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechMplsLdpFecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the FEC (Forwarding Equivalence Class) Information associated with an LSP." ::= { qtechMplsLdpMplsGernalMibObjects 6 } qtechMplsLdpFecEntry OBJECT-TYPE SYNTAX QtechMplsLdpFecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a single FEC Element." INDEX { mplsFecIndex } ::= { qtechMplsLdpFecTable 1 } QtechMplsLdpFecEntry ::= SEQUENCE { mplsFecIndex INTEGER, mplsFecType INTEGER, mplsFecAddrType InetAddressType, mplsFecAddr InetAddress, mplsFecAddrPrefixLength InetAddressPrefixLength, mplsFecStatus INTEGER, mplsFecLspActivity TruthValue, mplsFecLspDisconnect TruthValue, mplsFecLspDisconnectType INTEGER, mplsFecSession MplsLdpIdentifier, mplsLdpSessionCloseType INTEGER, mplsFecIngressBytes INTEGER, mplsFecIngressPackets INTEGER, mplsFecTransmitBytes INTEGER, mplsFecTransmitPackets INTEGER } mplsFecIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index which uniquely identifies this entry." ::= { qtechMplsLdpFecEntry 1 } mplsFecType OBJECT-TYPE SYNTAX INTEGER { prefix(1), hostAddress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the FEC. If the value of this object is 'prefix(1)' then the FEC type described by this row is an address prefix. If the value of this object is 'hostAddress(2)' then the FEC type described by this row is a host address." REFERENCE "RFC3036, Section 3.4.1. FEC TLV." ::= { qtechMplsLdpFecEntry 2 } mplsFecAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is the type of the Internet address. The value of this object, decides how the value of the mplsFecAddr object is interpreted." REFERENCE "RFC3036, Section 3.4.1. FEC TLV." ::= { qtechMplsLdpFecEntry 3 } mplsFecAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is interpreted based on the value of the 'mplsFecAddrType' object. This address is then further interpretted as an being used with the address prefix, or as the host address. This further interpretation is indicated by the 'mplsFecType' object. In other words, the FEC element is populated according to the Prefix FEC Element value encoding, or the Host Address FEC Element encoding." REFERENCE "RFC3036, Section 3.4.1 FEC TLV." ::= { qtechMplsLdpFecEntry 4 } mplsFecAddrPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "If the value of the 'mplsFecType' is 'hostAddress(2)' then this object is undefined. If the value of 'mplsFecType' is 'prefix(1)' then the value of this object is the length in bits of the address prefix represented by 'mplsFecAddr', or zero. If the value of this object is zero, this indicates that the prefix matches all addresses. In this case the address prefix MUST also be zero (i.e., 'mplsFecAddr' should have the value of zero.)" REFERENCE "RFC3036, Section 3.4.1. FEC TLV." DEFVAL { 0 } ::= { qtechMplsLdpFecEntry 5 } mplsFecStatus OBJECT-TYPE SYNTAX INTEGER { route(1), nonroute(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the FEC. If the value of this object is 'prefix(1)' then the FEC type described by this row is an address prefix. If the value of this object is 'hostAddress(2)' then the FEC type described by this row is a host address." ::= { qtechMplsLdpFecEntry 6 } mplsFecLspActivity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "LSP activity state." ::= { qtechMplsLdpFecEntry 7 } mplsFecLspDisconnect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "LSP disconnection state." ::= { qtechMplsLdpFecEntry 8 } mplsFecLspDisconnectType OBJECT-TYPE SYNTAX INTEGER { sessionDown(1), nhChng(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "LSP disconnection reason." ::= { qtechMplsLdpFecEntry 9 } mplsFecSession OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "Corresponding LDP session of FEC nexthop" ::= { qtechMplsLdpFecEntry 10 } mplsLdpSessionCloseType OBJECT-TYPE SYNTAX INTEGER { none(0), backoff(1), hello_timer_expired(2), peer_holddown_time_expired(3), keepalive_timer_expired(4), peer_keepalive_time_expired(5), bad_ldp_identifier(6), peer_recv_bad_ldp_identifier(7), bad_protocol_version(8), peer_recv_bad_protocol_version(9), peer_recv_bad_pdu_length(10), peer_recv_bad_message_length(11), peer_recv_bad_tlv_length(12), malformed_tlv_value(13), peer_recv_malformed_tlv_value(14), peer_shutdown(15), session_rejected_no_hello(16), peer_rejected_no_hello(17), session_rejected_parameters_advertisement_mode(18), peer_rejected_advertisement_mode(19), session_rejected_parameters_max_pdu_length(20), peer_rejected_max_pdu_length(21), peer_rejected_parameters_label_range(22), session_rejected_bad_keepalive_time(23), peer_rejected_bad_keepalive_time(24), internal_error(25), peer_internal_error(26), event_unlawful(27), passive_wait_init_or_keepalive_expired(28), peer_unknown_message_type(29), peer_unknown_tlv_type(30), tcp_connection_closed_by_peer(31), no_ip_routing(32), nsr_recover_fail(33), session_has_no_other_adj(34), session_connect_fail(35), session_count_has_reach_max_count(36), session_send_msg_fail(37), session_md5_password_changed(38), fsm_process_fail(39), session_init_fail(40), add_ftn_or_ilm_fail(41), close_instance_close(42), close_msg_proto_version_error(43), close_session_backoff_callback_but_no_active_adj(44), close_recv_bad_msg(45), user_cleared_session_manually(46), ldp_unconfigured_globally(47), ldp_disabled_on_interface(48), no_enough_memory(49), ldp_global_config_change(50), interface_vrf_changed(51), ldp_router_id_changed(52), interface_down(53), recv_bad_length_msg(54), recv_bad_tlv_len(55), recv_malformed_tlv(56), recv_internal_error(57), recv_bad_pdu_length(58), tcp_connect_not_correct(59), nsm_client_close(60), process_label_mapping_fail(61), targeted_session_unconfigured(62), switchover_process_gr(63), local_host_process_gr(64), reload_command(65), te_interface_disabled_targeted_session(66), targeted_hellos_no_longer_accepted(67) } MAX-ACCESS read-only STATUS current DESCRIPTION "Corresponding LDP session tear down reason of FEC nexthop." ::= { qtechMplsLdpFecEntry 11 } mplsFecIngressBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Received bytes by LSP,where 0 means does not support" ::= { qtechMplsLdpFecEntry 12 } mplsFecIngressPackets OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Received packets by LSP,where 0 means does not support" ::= { qtechMplsLdpFecEntry 13 } mplsFecTransmitBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forwarding bytes by LSP,where 0 means does not support" ::= { qtechMplsLdpFecEntry 14 } mplsFecTransmitPackets OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forwarding packets by LSP,where 0 means does not support" ::= { qtechMplsLdpFecEntry 15 } END