ALCATEL-IND1-PIM-STD-MIB DEFINITIONS ::= BEGIN IMPORTS routingIND1Pim FROM ALCATEL-IND1-BASE MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter32, Counter64, Gauge32, TimeTicks FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TruthValue, StorageType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB InetAddressType, InetAddressPrefixLength, InetAddress, InetVersion FROM INET-ADDRESS-MIB IANAipRouteProtocol FROM IANA-RTPROTO-MIB; alaPimStdMIB MODULE-IDENTITY LAST-UPDATED "200707020000Z" -- 2 July 2007 ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of PIM routers. This MIB is based on the Internet Draft developed by the IETF PIM Working Group. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200707020000Z" DESCRIPTION "The latest version of this MIB Module." ::= { routingIND1Pim 2 } -- -- Textual Conventions -- AlaPimMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The PIM mode in which a group is operating. none(1) The group is not using PIM, which may be the case if, for example, it is a link-local or unroutable group address. ssm(2) Source-Specific Multicast (SSM) with PIM Sparse Mode. asm(3) Any Source Multicast (ASM), with PIM Sparse Mode. bidir(4) Bi-directional PIM. dm(5) PIM Dense Mode. other(6) Any other PIM mode." SYNTAX INTEGER { none(1), ssm(2), asm(3), bidir(4), dm(5), other(6) } AlaPimGroupMappingOriginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The mechanism by which a PIM group mapping was learned. fixed(1) Link-local or unroutable group mappings. configRp(2) Local static RP configuration. configSsm(3) Local SSM Group configuration. bsr(4) The PIM Bootstrap Router (BSR) mechanism. autoRP(5) Cisco's Auto-RP mechanism. embedded(6) The Embedded-RP mechanism where the RP address is embedded in the multicast group address. other(7) Any other mechanism." REFERENCE "RFC 3596, RFC 3956 and I-D.ietf-pim-sm-bsr" SYNTAX INTEGER { fixed(1), configRp(2), configSsm(3), bsr(4), autoRP(5), embedded(6), other(7) } -- -- Top-level structure -- alaPimNotifications OBJECT IDENTIFIER ::= { alaPimStdMIB 0 } alaPim OBJECT IDENTIFIER ::= { alaPimStdMIB 1 } alaPimKeepalivePeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the Keepalive Timer. This is the period during which the PIM router will maintain (S,G) state in the absence of explicit (S,G) local membership or (S,G) join messages received to maintain it. This timer period is called the Keepalive_Period in the PIM-SM specification. It is called the SourceLifetime in the PIM-DM specification. The storage type of this object is determined by alaPimDeviceConfigStorageType." REFERENCE "RFC 4601 section 4.11" DEFVAL { 210 } ::= { alaPim 14 } alaPimRegisterSuppressionTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Rendezvous Point (RP) after receiving a Register-Stop message. This object is used to run timers both at the DR and at the RP. This timer period is called the Register_Suppression_Time in the PIM-SM specification. The storage type of this object is determined by alaPimDeviceConfigStorageType." REFERENCE "RFC 4601 section 4.11" DEFVAL { 60 } ::= { alaPim 15 } alaPimStarGEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the alaPimStarGTable." ::= { alaPim 16 } alaPimStarGIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the alaPimStarGITable." ::= { alaPim 17 } alaPimSGEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the alaPimSGTable." ::= { alaPim 18 } alaPimSGIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the alaPimSGITable." ::= { alaPim 19 } alaPimSGRptEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the alaPimSGRptTable." ::= { alaPim 20 } alaPimSGRptIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the alaPimSGRptITable." ::= { alaPim 21 } alaPimOutAsserts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Asserts sent by this router. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.6" ::= { alaPim 22 } alaPimInAsserts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented by all routers that receive an assert, not only those routers that are contesting the assert. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.6" ::= { alaPim 23 } alaPimLastAssertInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The interface on which this router most recently sent or received an assert, or zero if this router has not sent or received an assert." REFERENCE "RFC 4601 section 4.6" ::= { alaPim 24 } alaPimLastAssertGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the multicast group address in the most recently sent or received assert. If this router has not sent or received an assert then this object is set to unknown(0)." ::= { alaPim 25 } alaPimLastAssertGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast group address in the most recently sent or received assert. The InetAddressType is given by the alaPimLastAssertGroupAddressType object." ::= { alaPim 26 } alaPimLastAssertSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the multicast source address in the most recently sent or received assert. If the most recent assert was (*,G), or if this router has not sent or received an assert, then this object is set to unknown(0)." ::= { alaPim 27 } alaPimLastAssertSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast source address in the most recently sent or received assert. The InetAddressType is given by the alaPimLastAssertSourceAddressType object." ::= { alaPim 28 } alaPimNeighborLossNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between alaPimNeighborLoss notifications originated by this router. The maximum value 65535 represents an 'infinite' time, in which case no alaPimNeighborLoss traps are ever sent. The storage type of this object is determined by alaPimDeviceConfigStorageType." DEFVAL { 0 } ::= { alaPim 29 } alaPimNeighborLossCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbor loss events that have occurred. This count is incremented when the neighbor timer expires, and the router has no other neighbors on the same interface with the same IP version and a lower IP address than itself. This counter is incremented whenever a alaPimNeighborLoss notification would be generated. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2" ::= { alaPim 30 } alaPimInvalidRegisterNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (10..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between alaPimInvalidRegister notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimInvalidRegister notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the data and control planes to the network management plane. The storage type of this object is determined by alaPimDeviceConfigStorageType." DEFVAL { 65535 } ::= { alaPim 31 } alaPimInvalidRegisterMsgsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid PIM Register messages that have been received by this device. A PIM Register message is invalid if either o the destination address of the Register message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Register implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object alaPimGroupMappingPimMode. If there is no such mapping, then the object alaPimGroupMappingPimMode is absent. The RP address contained in the invalid Register is alaPimInvalidRegisterRp. Multicast data carried by invalid Register messages is discarded. The discarded data is from a source directly connected to alaPimInvalidRegisterOrigin, and is addressed to alaPimInvalidRegisterGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.4.2, RFC 3569 and I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable" ::= { alaPim 32 } alaPimInvalidRegisterAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type stored in alaPimInvalidRegisterOrigin, alaPimInvalidRegisterGroup and alaPimInvalidRegisterRp. If no unexpected Register messages have been received, then this object is set to unknown(0)." ::= { alaPim 33 } alaPimInvalidRegisterOrigin OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the last unexpected Register message received by this device." ::= { alaPim 34 } alaPimInvalidRegisterGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address to which the last unexpected Register message received by this device was addressed." ::= { alaPim 35 } alaPimInvalidRegisterRp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RP address to which the last unexpected Register message received by this device was delivered." ::= { alaPim 36 } alaPimInvalidJoinPruneNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (10..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between alaPimInvalidJoinPrune notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimInvalidJoinPrune notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the control plane to the network management plane. The storage type of this object is determined by alaPimDeviceConfigStorageType." DEFVAL { 65535 } ::= { alaPim 37 } alaPimInvalidJoinPruneMsgsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid PIM Join/Prune messages that have been received by this device. A PIM Join/Prune message is invalid if either o the Group to RP mapping specified by this message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Join/Prune (*,G) or (S,G,rpt) implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object alaPimGroupMappingPimMode. If there is no such mapping, then the object alaPimGroupMappingPimMode is absent. The RP address contained in the invalid Join/Prune is alaPimInvalidJoinPruneRp. Invalid Join/Prune messages are discarded. This may result in loss of multicast data affecting listeners downstream of alaPimInvalidJoinPruneOrigin, for multicast data addressed to alaPimInvalidJoinPruneGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.5.2, RFC 3569 and I-D.ietf.mboned-ip-mcast-mib ipMcastSsmRangeTable" ::= { alaPim 38 } alaPimInvalidJoinPruneAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type stored in alaPimInvalidJoinPruneOrigin, alaPimInvalidJoinPruneGroup and alaPimInvalidJoinPruneRp. If no unexpected Join/Prune messages have been received, this object is set to unknown(0)." ::= { alaPim 39 } alaPimInvalidJoinPruneOrigin OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the last unexpected Join/Prune message received by this device." ::= { alaPim 40 } alaPimInvalidJoinPruneGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address carried in the last unexpected Join/Prune message received by this device." ::= { alaPim 41 } alaPimInvalidJoinPruneRp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RP address carried in the last unexpected Join/Prune message received by this device." ::= { alaPim 42 } alaPimRPMappingNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between alaPimRPMappingChange notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimRPMappingChange notifications are ever sent. The storage type of this object is determined by alaPimDeviceConfigStorageType." DEFVAL { 65535 } ::= { alaPim 43 } alaPimRPMappingChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of changes to active RP mappings on this device. Information about active RP mappings is available in alaPimGroupMappingTable. Only changes to active mappings cause this count to be incremented. That is, changes that modify the alaPimGroupMappingEntry with the highest precedence for a group (lowest value of alaPimGroupMappingPrecedence). Such changes may result from manual configuration of this device, or from automatic RP mapping discovery methods including the PIM Bootstrap Router (BSR) mechanism. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "I-D.ietf-pim-sm-bsr" ::= { alaPim 44 } alaPimInterfaceElectionNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between alaPimInterfaceElection notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimInterfaceElection notifications are ever sent. The storage type of this object is determined by alaPimDeviceConfigStorageType." DEFVAL { 65535 } ::= { alaPim 45 } alaPimInterfaceElectionWinCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this device has been elected DR or DF on any interface. Elections occur frequently on newly-active interfaces, as triggered Hellos establish adjacencies. This counter is not incremented for elections on an interface until the first periodic Hello has been sent. If this router is the DR or DF at the time of sending the first periodic Hello after interface activation, then this counter is incremented (once) at that time. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2 and I-D.ietf-pim-bidir section 3.5.2" ::= { alaPim 46 } alaPimRefreshInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This object is used only by PIM-DM. The storage type of this object is determined by alaPimDeviceConfigStorageType." REFERENCE "RFC 3973 section 4.8" DEFVAL { 60 } ::= { alaPim 47 } alaPimDeviceConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type used for the global PIM configuration of this device, comprised of the objects listed below. If this storage type takes the value 'permanent', write-access to the listed objects need not be allowed. The objects described by this storage type are: alaPimKeepalivePeriod, alaPimRegisterSuppressionTime, alaPimNeighborLossNotificationPeriod, alaPimInvalidRegisterNotificaationPeriod, alaPimInvalidJoinPruneNotificationPeriod, alaPimRPMappingNotificationPeriod, alaPimInterfaceElectionNotificationPeriod and alaPimRefreshInterval." DEFVAL { nonVolatile } ::= { alaPim 48 } -- -- The PIM Interface Table -- alaPimInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. PIM is enabled on all interfaces listed in this table." ::= { alaPim 1 } alaPimInterfaceEntry OBJECT-TYPE SYNTAX AlaPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimInterfaceTable. This entry is preserved on agent restart." INDEX { alaPimInterfaceIfIndex, alaPimInterfaceIPVersion } ::= { alaPimInterfaceTable 1 } AlaPimInterfaceEntry ::= SEQUENCE { alaPimInterfaceIfIndex InterfaceIndex, alaPimInterfaceIPVersion InetVersion, alaPimInterfaceAddressType InetAddressType, alaPimInterfaceAddress InetAddress, alaPimInterfaceGenerationIDValue Unsigned32, alaPimInterfaceDR InetAddress, alaPimInterfaceDRPriority Unsigned32, alaPimInterfaceDRPriorityEnabled TruthValue, alaPimInterfaceHelloInterval Unsigned32, alaPimInterfaceTrigHelloInterval Unsigned32, alaPimInterfaceHelloHoldtime Unsigned32, alaPimInterfaceJoinPruneInterval Unsigned32, alaPimInterfaceJoinPruneHoldtime Unsigned32, alaPimInterfaceDFElectionRobustness Unsigned32, alaPimInterfaceLanDelayEnabled TruthValue, alaPimInterfacePropagationDelay Unsigned32, alaPimInterfaceOverrideInterval Unsigned32, alaPimInterfaceEffectPropagDelay Unsigned32, alaPimInterfaceEffectOverrideIvl Unsigned32, alaPimInterfaceSuppressionEnabled TruthValue, alaPimInterfaceBidirCapable TruthValue, alaPimInterfaceDomainBorder TruthValue, alaPimInterfaceStubInterface TruthValue, alaPimInterfacePruneLimitInterval Unsigned32, alaPimInterfaceGraftRetryInterval Unsigned32, alaPimInterfaceSRPriorityEnabled TruthValue, alaPimInterfaceStatus RowStatus, alaPimInterfaceStorageType StorageType } alaPimInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { alaPimInterfaceEntry 1 } alaPimInterfaceIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g. IPv4 and IPv6, however the traffic is considered to be logically separate." ::= { alaPimInterfaceEntry 2 } alaPimInterfaceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of this PIM interface." ::= { alaPimInterfaceEntry 3 } alaPimInterfaceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of this router on this PIM interface. The InetAddressType is given by the alaPimInterfaceAddressType object." REFERENCE "RFC 4601 sections 4.1.6, 4.3.1-4.3.4 and 4.5.1" ::= { alaPimInterfaceEntry 4 } alaPimInterfaceGenerationIDValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface." REFERENCE "RFC 4601 section 4.3.1" ::= { alaPimInterfaceEntry 5 } alaPimInterfaceDR OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the alaPimInterfaceAddressType object." REFERENCE "RFC 4601 section 4.3" ::= { alaPimInterfaceEntry 6 } alaPimInterfaceDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Designated Router Priority value inserted into the DR Priority option on this interface. Numerically higher values for this object indicate higher priorities." REFERENCE "RFC 4601 section 4.3.2" DEFVAL { 1 } ::= { alaPimInterfaceEntry 7 } alaPimInterfaceDRPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the DR Priority option." REFERENCE "RFC 4601 section 4.3.2" ::= { alaPimInterfaceEntry 8 } alaPimInterfaceHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (0..18000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Hello messages should not be sent on this interface." REFERENCE "RFC 4601 section 9" DEFVAL { 30 } ::= { alaPimInterfaceEntry 9 } alaPimInterfaceTrigHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (0..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no special meaning and indicates that triggered PIM Hello messages should always be sent immediately." REFERENCE "RFC 4601 section 4.11" DEFVAL { 5 } ::= { alaPimInterfaceEntry 10 } alaPimInterfaceHelloHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value set in the Holdtime field of PIM Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of alaPimInterfaceHelloInterval, or 65535 if alaPimInterfaceHelloInterval is set to zero." REFERENCE "RFC 4601 sections 4.3.2 and 4.9.2" DEFVAL { 105 } ::= { alaPimInterfaceEntry 11 } alaPimInterfaceJoinPruneInterval OBJECT-TYPE SYNTAX Unsigned32 (0..18000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Join/Prune messages should not be sent on this interface." REFERENCE "RFC 4601 section 4.11" DEFVAL { 60 } ::= { alaPimInterfaceEntry 12 } alaPimInterfaceJoinPruneHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of alaPimInterfaceJoinPruneInterval, or 65535 if alaPimInterfaceJoinPruneInterval is set to zero. PIM-DM implementations are recommended to use the value of alaPimInterfacePruneLimitInterval." REFERENCE "RFC 4601 sections 4.5.3 and 4.9.5" DEFVAL { 210 } ::= { alaPimInterfaceEntry 13 } alaPimInterfaceDFElectionRobustness OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of PIM DF-Election messages that must be lost in order for DF election on this interface to fail." DEFVAL { 3 } ::= { alaPimInterfaceEntry 14 } alaPimInterfaceLanDelayEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay option." REFERENCE "RFC 4601 sections 4.3.3 and 4.9.2" ::= { alaPimInterfaceEntry 15 } alaPimInterfacePropagationDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The expected propagation delay between PIM routers on this network or link. This router inserts this value into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages sent on this interface. Implementations should enforce a lower bound on the permitted values for this object to allow for scheduling and processing delays within the local router." DEFVAL { 500 } ::= { alaPimInterfaceEntry 16 } alaPimInterfaceOverrideInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface. When overriding a prune, PIM routers pick a random timer duration up to the value of this object. The more PIM routers that are active on a network, the more likely it is that the prune will be overridden after a small proportion of this time has elapsed. The more PIM routers are active on this network, the larger this object should be to obtain an optimal spread of prune override latencies." REFERENCE "RFC 4601 section 4.3.3" DEFVAL { 2500 } ::= { alaPimInterfaceEntry 17 } alaPimInterfaceEffectPropagDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Effective Propagation Delay on this interface. This object is always 500 if alaPimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimInterfaceEntry 18 } alaPimInterfaceEffectOverrideIvl OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Effective Override Interval on this interface. This object is always 2500 if alaPimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimInterfaceEntry 19 } alaPimInterfaceSuppressionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether join suppression is enabled on this interface. This object is always TRUE if alaPimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimInterfaceEntry 20 } alaPimInterfaceBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the Bidirectional-PIM Capable option." REFERENCE "I-D.ietf-pim-bidir section 3.2 and 3.7.4" ::= { alaPimInterfaceEntry 21 } alaPimInterfaceDomainBorder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether or not this interface is a PIM domain border. This includes acting as a border for PIM Bootstrap Router (BSR) messages, if the BSR mechanism is in use." DEFVAL { false } ::= { alaPimInterfaceEntry 22 } alaPimInterfaceStubInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this interface is a 'stub interface'. If this object is set to TRUE, then no PIM packets are sent out this interface, and any received PIM packets are ignored. Setting this object to TRUE is a security measure for interfaces towards untrusted hosts. This allows an interface to be configured for use with IGMP (Internet Group Management Protocol) or MLD (Multicast Listener Discovery) only, which protects the PIM router from forged PIM messages on the interface. To communicate with other PIM routers using this interface, this object must remain set to FALSE. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated." REFERENCE "RFC 3376, RFC 3810" DEFVAL { false } ::= { alaPimInterfaceEntry 23 } alaPimInterfacePruneLimitInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 60 } ::= { alaPimInterfaceEntry 24 } alaPimInterfaceGraftRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 3 } ::= { alaPimInterfaceEntry 25 } alaPimInterfaceSRPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM." ::= { alaPimInterfaceEntry 26 } alaPimInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. This status object can be set to active(1) without setting any other columnar objects in this entry. All writeable objects in this entry can be modified when the status of this entry is active(1)." ::= { alaPimInterfaceEntry 27 } alaPimInterfaceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { alaPimInterfaceEntry 28 } -- -- The PIM Neighbor Table -- alaPimNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM neighbors." ::= { alaPim 2 } alaPimNeighborEntry OBJECT-TYPE SYNTAX AlaPimNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimNeighborTable." INDEX { alaPimNeighborIfIndex, alaPimNeighborAddressType, alaPimNeighborAddress } ::= { alaPimNeighborTable 1 } AlaPimNeighborEntry ::= SEQUENCE { alaPimNeighborIfIndex InterfaceIndex, alaPimNeighborAddressType InetAddressType, alaPimNeighborAddress InetAddress, alaPimNeighborGenerationIDPresent TruthValue, alaPimNeighborGenerationIDValue Unsigned32, alaPimNeighborUpTime TimeTicks, alaPimNeighborExpiryTime TimeTicks, alaPimNeighborDRPriorityPresent TruthValue, alaPimNeighborDRPriority Unsigned32, alaPimNeighborLanPruneDelayPresent TruthValue, alaPimNeighborTBit TruthValue, alaPimNeighborPropagationDelay Unsigned32, alaPimNeighborOverrideInterval Unsigned32, alaPimNeighborBidirCapable TruthValue, alaPimNeighborSRCapable TruthValue } alaPimNeighborIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { alaPimNeighborEntry 1 } alaPimNeighborAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { alaPimNeighborEntry 2 } alaPimNeighborAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the alaPimNeighborAddressType object." ::= { alaPimNeighborEntry 3 } alaPimNeighborGenerationIDPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the Generation ID option." REFERENCE "RFC 4601 section 4.3.1" ::= { alaPimNeighborEntry 4 } alaPimNeighborGenerationIDValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if alaPimNeighborGenerationIDPresent is FALSE." REFERENCE "RFC 4601 section 4.3.1" ::= { alaPimNeighborEntry 5 } alaPimNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this PIM neighbor (last) became a neighbor of the local router." ::= { alaPimNeighborEntry 6 } alaPimNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out." ::= { alaPimNeighborEntry 7 } alaPimNeighborDRPriorityPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the DR Priority option." REFERENCE "RFC 4601 section 4.3.2" ::= { alaPimNeighborEntry 8 } alaPimNeighborDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if alaPimNeighborDRPriorityPresent is FALSE." REFERENCE "RFC 4601 section 4.3.2" ::= { alaPimNeighborEntry 9 } alaPimNeighborLanPruneDelayPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the LAN Prune Delay option." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimNeighborEntry 10 } alaPimNeighborTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This object is always TRUE if alaPimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimNeighborEntry 11 } alaPimNeighborPropagationDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if alaPimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimNeighborEntry 12 } alaPimNeighborOverrideInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if alaPimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { alaPimNeighborEntry 13 } alaPimNeighborBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option." REFERENCE "I-D.ietf-pim-bidir section 3.2 and 3.7.4" ::= { alaPimNeighborEntry 14 } alaPimNeighborSRCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.3.4" ::= { alaPimNeighborEntry 15 } -- -- The PIM Neighbor Secondary Address Table -- alaPimNbrSecAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the alaPimNeighborTable defined above)." REFERENCE "RFC 4601 section 4.3.4" ::= { alaPim 3 } alaPimNbrSecAddressEntry OBJECT-TYPE SYNTAX AlaPimNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimNbrSecAddressTable." INDEX { alaPimNbrSecAddressIfIndex, alaPimNbrSecAddressType, alaPimNbrSecAddressPrimary, alaPimNbrSecAddress } ::= { alaPimNbrSecAddressTable 1 } AlaPimNbrSecAddressEntry ::= SEQUENCE { alaPimNbrSecAddressIfIndex InterfaceIndex, alaPimNbrSecAddressType InetAddressType, alaPimNbrSecAddressPrimary InetAddress, alaPimNbrSecAddress InetAddress } alaPimNbrSecAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { alaPimNbrSecAddressEntry 1 } alaPimNbrSecAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { alaPimNbrSecAddressEntry 2 } alaPimNbrSecAddressPrimary OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the alaPimNbrSecAddressType object." ::= { alaPimNbrSecAddressEntry 3 } alaPimNbrSecAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary IP address of this PIM neighbor. The InetAddressType is given by the alaPimNbrSecAddressType object." ::= { alaPimNbrSecAddressEntry 4 } -- -- The PIM (*,G) State Table -- alaPimStarGTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimStarGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (*,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.3" ::= { alaPim 4 } alaPimStarGEntry OBJECT-TYPE SYNTAX AlaPimStarGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimStarGTable." INDEX { alaPimStarGAddressType, alaPimStarGGrpAddress } ::= { alaPimStarGTable 1 } AlaPimStarGEntry ::= SEQUENCE { alaPimStarGAddressType InetAddressType, alaPimStarGGrpAddress InetAddress, alaPimStarGUpTime TimeTicks, alaPimStarGPimMode AlaPimMode, alaPimStarGRPAddressType InetAddressType, alaPimStarGRPAddress InetAddress, alaPimStarGPimModeOrigin AlaPimGroupMappingOriginType, alaPimStarGRPIsLocal TruthValue, alaPimStarGUpstreamJoinState INTEGER, alaPimStarGUpstreamJoinTimer TimeTicks, alaPimStarGUpstreamNeighborType InetAddressType, alaPimStarGUpstreamNeighbor InetAddress, alaPimStarGRPFIfIndex InterfaceIndexOrZero, alaPimStarGRPFNextHopType InetAddressType, alaPimStarGRPFNextHop InetAddress, alaPimStarGRPFRouteProtocol IANAipRouteProtocol, alaPimStarGRPFRouteAddress InetAddress, alaPimStarGRPFRoutePrefixLength InetAddressPrefixLength, alaPimStarGRPFRouteMetricPref Unsigned32, alaPimStarGRPFRouteMetric Unsigned32 } alaPimStarGAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this multicast group." ::= { alaPimStarGEntry 1 } alaPimStarGGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address. The InetAddressType is given by the alaPimStarGAddressType object." ::= { alaPimStarGEntry 2 } alaPimStarGUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { alaPimStarGEntry 3 } alaPimStarGPimMode OBJECT-TYPE SYNTAX AlaPimMode MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this entry represents an ASM (Any Source Multicast, used with PIM-SM) or BIDIR-PIM group." ::= { alaPimStarGEntry 4 } alaPimStarGRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown." ::= { alaPimStarGEntry 5 } alaPimStarGRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the alaPimStarGRPAddressType." ::= { alaPimStarGEntry 6 } alaPimStarGPimModeOrigin OBJECT-TYPE SYNTAX AlaPimGroupMappingOriginType MAX-ACCESS read-only STATUS current DESCRIPTION "The mechanism by which the PIM mode and RP for the group were learned." ::= { alaPimStarGEntry 7 } alaPimStarGRPIsLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router is the RP for the group." ::= { alaPimStarGEntry 8 } alaPimStarGUpstreamJoinState OBJECT-TYPE SYNTAX INTEGER { notJoined (1), joined (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.6" ::= { alaPimStarGEntry 9 } alaPimStarGUpstreamJoinTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router next sends a periodic (*,G) Join message on alaPimStarGRPFIfIndex. This timer is called the (*,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.10" ::= { alaPimStarGEntry 10 } alaPimStarGUpstreamNeighborType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor." ::= { alaPimStarGEntry 11 } alaPimStarGUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address of the neighbor on alaPimStarGRPFIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the alaPimStarGUpstreamNeighborType object. This address is called RPF'(*,G) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.6" ::= { alaPimStarGEntry 12 } alaPimStarGRPFIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the RPF interface towards the RP, or zero if the RPF interface is unknown." ::= { alaPimStarGEntry 13 } alaPimStarGRPFNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown." ::= { alaPimStarGEntry 14 } alaPimStarGRPFNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the RPF next hop towards the RP. The InetAddressType is given by the alaPimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.5" ::= { alaPimStarGEntry 15 } alaPimStarGRPFRouteProtocol OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the RPF interface towards the RP was learned." ::= { alaPimStarGEntry 16 } alaPimStarGRPFRouteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address which when combined with the corresponding value of alaPimStarGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the alaPimStarGRPFNextHopType object. This address object is only significant up to alaPimStarGRPFRoutePrefixLength bits. The remainder of the address bits are zero." ::= { alaPimStarGEntry 17 } alaPimStarGRPFRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length which when combined with the corresponding value of alaPimStarGRPFRouteAddress identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the alaPimStarGRPFNextHopType object." ::= { alaPimStarGEntry 18 } alaPimStarGRPFRouteMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference of the route used to find the RPF interface towards the RP." ::= { alaPimStarGEntry 19 } alaPimStarGRPFRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric of the route used to find the RPF interface towards the RP." ::= { alaPimStarGEntry 20 } -- -- The PIM (*,G,I) State Table -- alaPimStarGITable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimStarGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (*,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.3" ::= { alaPim 5 } alaPimStarGIEntry OBJECT-TYPE SYNTAX AlaPimStarGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimStarGITable." INDEX { alaPimStarGAddressType, alaPimStarGGrpAddress, alaPimStarGIIfIndex } ::= { alaPimStarGITable 1 } AlaPimStarGIEntry ::= SEQUENCE { alaPimStarGIIfIndex InterfaceIndex, alaPimStarGIUpTime TimeTicks, alaPimStarGILocalMembership TruthValue, alaPimStarGIJoinPruneState INTEGER, alaPimStarGIPrunePendingTimer TimeTicks, alaPimStarGIJoinExpiryTimer TimeTicks, alaPimStarGIAssertState INTEGER, alaPimStarGIAssertTimer TimeTicks, alaPimStarGIAssertWinnerAddressType InetAddressType, alaPimStarGIAssertWinnerAddress InetAddress, alaPimStarGIAssertWinnerMetricPref Unsigned32, alaPimStarGIAssertWinnerMetric Unsigned32 } alaPimStarGIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { alaPimStarGIEntry 1 } alaPimStarGIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { alaPimStarGIEntry 2 } alaPimStarGILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(*,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6" ::= { alaPimStarGIEntry 3 } alaPimStarGIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.2" ::= { alaPimStarGIEntry 4 } alaPimStarGIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (*,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.1" ::= { alaPimStarGIEntry 5 } alaPimStarGIJoinExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time." REFERENCE "RFC 4601 section 4.10" ::= { alaPimStarGIEntry 6 } alaPimStarGIAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), iAmAssertWinner (2), iAmAssertLoser (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification. If alaPimStarGPimMode is 'bidir', this object must be 'noInfo'." REFERENCE "RFC 4601 section 4.6.2" ::= { alaPimStarGIEntry 7 } alaPimStarGIAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If alaPimStarGIAssertState is 'iAmAssertLoser', this is the time remaining before the (*,G) Assert state expires. If alaPimStarGIAssertState is 'noInfo', this is zero. This timer is called the (*,G) Assert Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.2" ::= { alaPimStarGIEntry 8 } alaPimStarGIAssertWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0)." ::= { alaPimStarGIEntry 9 } alaPimStarGIAssertWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the alaPimStarGIAssertWinnerAddressType object." ::= { alaPimStarGIEntry 10 } alaPimStarGIAssertWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is zero." ::= { alaPimStarGIEntry 11 } alaPimStarGIAssertWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero." ::= { alaPimStarGIEntry 12 } -- -- The PIM (S,G) State Table -- alaPimSGTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimSGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (S,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.4" ::= { alaPim 6 } alaPimSGEntry OBJECT-TYPE SYNTAX AlaPimSGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimSGTable." INDEX { alaPimSGAddressType, alaPimSGGrpAddress, alaPimSGSrcAddress } ::= { alaPimSGTable 1 } AlaPimSGEntry ::= SEQUENCE { alaPimSGAddressType InetAddressType, alaPimSGGrpAddress InetAddress, alaPimSGSrcAddress InetAddress, alaPimSGUpTime TimeTicks, alaPimSGPimMode AlaPimMode, alaPimSGUpstreamJoinState INTEGER, alaPimSGUpstreamJoinTimer TimeTicks, alaPimSGUpstreamNeighbor InetAddress, alaPimSGRPFIfIndex InterfaceIndexOrZero, alaPimSGRPFNextHopType InetAddressType, alaPimSGRPFNextHop InetAddress, alaPimSGRPFRouteProtocol IANAipRouteProtocol, alaPimSGRPFRouteAddress InetAddress, alaPimSGRPFRoutePrefixLength InetAddressPrefixLength, alaPimSGRPFRouteMetricPref Unsigned32, alaPimSGRPFRouteMetric Unsigned32, alaPimSGSPTBit TruthValue, alaPimSGKeepaliveTimer TimeTicks, alaPimSGDRRegisterState INTEGER, alaPimSGDRRegisterStopTimer TimeTicks, alaPimSGRPRegisterPMBRAddressType InetAddressType, alaPimSGRPRegisterPMBRAddress InetAddress, alaPimSGUpstreamPruneState INTEGER, alaPimSGUpstreamPruneLimitTimer TimeTicks, alaPimSGOriginatorState INTEGER, alaPimSGSourceActiveTimer TimeTicks, alaPimSGStateRefreshTimer TimeTicks } alaPimSGAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the source and multicast group for this entry." ::= { alaPimSGEntry 1 } alaPimSGGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address for this entry. The InetAddressType is given by the alaPimSGAddressType object." ::= { alaPimSGEntry 2 } alaPimSGSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry. The InetAddressType is given by the alaPimSGAddressType object." ::= { alaPimSGEntry 3 } alaPimSGUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { alaPimSGEntry 4 } alaPimSGPimMode OBJECT-TYPE SYNTAX AlaPimMode MAX-ACCESS read-only STATUS current DESCRIPTION "Whether alaPimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM), or DM (Dense Mode) group." REFERENCE "RFC 4601 sections 4.5.2, RFC 3569 and I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable" ::= { alaPimSGEntry 5 } alaPimSGUpstreamJoinState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), notJoined (1), joined (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (S,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.7" ::= { alaPimSGEntry 6 } alaPimSGUpstreamJoinTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router next sends a periodic (S,G) Join message on alaPimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.10 and 4.11" ::= { alaPimSGEntry 7 } alaPimSGUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address of the neighbor on alaPimSGRPFIfIndex that the local router is sending periodic (S,G) Join messages to. This is zero if the RPF next hop is unknown or is not a PIM neighbor. The InetAddressType is given by the alaPimSGAddressType object. This address is called RPF'(S,G) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.6" ::= { alaPimSGEntry 8 } alaPimSGRPFIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown." ::= { alaPimSGEntry 9 } alaPimSGRPFNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown." ::= { alaPimSGEntry 10 } alaPimSGRPFNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the RPF next hop towards the source. The InetAddressType is given by the alaPimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.5" ::= { alaPimSGEntry 11 } alaPimSGRPFRouteProtocol OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the RPF interface towards the source was learned." ::= { alaPimSGEntry 12 } alaPimSGRPFRouteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address which when combined with the corresponding value of alaPimSGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the alaPimSGRPFNextHopType object. This address object is only significant up to alaPimSGRPFRoutePrefixLength bits. The remainder of the address bits are zero." ::= { alaPimSGEntry 13 } alaPimSGRPFRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length which when combined with the corresponding value of alaPimSGRPFRouteAddress identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the alaPimSGRPFNextHopType object." ::= { alaPimSGEntry 14 } alaPimSGRPFRouteMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference of the route used to find the RPF interface towards the source." ::= { alaPimSGEntry 15 } alaPimSGRPFRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric of the route used to find the RPF interface towards the source." ::= { alaPimSGEntry 16 } alaPimSGSPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree." ::= { alaPimSGEntry 17 } alaPimSGKeepaliveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before, in the absence of explicit (S,G) local membership or (S,G) Join messages received to maintain it, this (S,G) state expires. This timer is called the (S,G) Keepalive Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.4" ::= { alaPimSGEntry 18 } alaPimSGDRRegisterState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), joinPending (3), prune (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Register state machine in the PIM-SM specification. This object is always 'noInfo' unless alaPimSGPimMode is 'asm'." REFERENCE "RFC 4601 section 4.4.1" ::= { alaPimSGEntry 19 } alaPimSGDRRegisterStopTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If alaPimSGDRRegisterState is 'joinPending', this is the time remaining before the local router resumes encapsulating data packets and sending them to the RP. Otherwise, this is zero. This timer is called the Register-Stop Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.4" ::= { alaPimSGEntry 20 } alaPimSGRPRegisterPMBRAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unknown(0) if the local router is not the RP for the group." ::= { alaPimSGEntry 21 } alaPimSGRPRegisterPMBRAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType is given by the alaPimSGRPRegisterPMBRAddressType object." ::= { alaPimSGEntry 22 } alaPimSGUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), forwarding (1), ackpending (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.4.1" ::= { alaPimSGEntry 23 } alaPimSGUpstreamPruneLimitTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router may send a (S,G) Prune message on alaPimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM specification. This object is zero if the timer is not running. This object is used only by PIM-DM." REFERENCE "RFC 2973 section 4.8" ::= { alaPimSGEntry 24 } alaPimSGOriginatorState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), notOriginator (1), originator (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.5.2" ::= { alaPimSGEntry 25 } alaPimSGSourceActiveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This timer is called the Source Active Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { alaPimSGEntry 26 } alaPimSGStateRefreshTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { alaPimSGEntry 27 } -- -- The PIM (S,G,I) State Table -- alaPimSGITable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimSGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (S,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.4" ::= { alaPim 7 } alaPimSGIEntry OBJECT-TYPE SYNTAX AlaPimSGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimSGITable." INDEX { alaPimSGAddressType, alaPimSGGrpAddress, alaPimSGSrcAddress, alaPimSGIIfIndex } ::= { alaPimSGITable 1 } AlaPimSGIEntry ::= SEQUENCE { alaPimSGIIfIndex InterfaceIndex, alaPimSGIUpTime TimeTicks, alaPimSGILocalMembership TruthValue, alaPimSGIJoinPruneState INTEGER, alaPimSGIPrunePendingTimer TimeTicks, alaPimSGIJoinExpiryTimer TimeTicks, alaPimSGIAssertState INTEGER, alaPimSGIAssertTimer TimeTicks, alaPimSGIAssertWinnerAddressType InetAddressType, alaPimSGIAssertWinnerAddress InetAddress, alaPimSGIAssertWinnerMetricPref Unsigned32, alaPimSGIAssertWinnerMetric Unsigned32 } alaPimSGIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { alaPimSGIEntry 1 } alaPimSGIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { alaPimSGIEntry 2 } alaPimSGILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(S,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 sections 4.1.6, 4.6.1 and 4.6.2" ::= { alaPimSGIEntry 3 } alaPimSGIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machine in the PIM-SM and PIM-DM specification." REFERENCE "RFC 4601 section 4.5.3 and RFC 3973 section 4.4.2" ::= { alaPimSGIEntry 4 } alaPimSGIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (S,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.3 and 4.5.4" ::= { alaPimSGIEntry 5 } alaPimSGIJoinExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time. This timer is called the (S,G) Prune Timer in the PIM-DM specification." REFERENCE "RFC 4601 section 4.10 and RFC 3973 section 4.8" ::= { alaPimSGIEntry 6 } alaPimSGIAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), iAmAssertWinner (2), iAmAssertLoser (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.1" ::= { alaPimSGIEntry 7 } alaPimSGIAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (S,G) Assert message on this interface. If alaPimSGIAssertState is 'iAmAssertLoser', this is the time remaining before the (S,G) Assert state expires. If alaPimSGIAssertState is 'noInfo', this is zero. This timer is called the (S,G) Assert Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.1" ::= { alaPimSGIEntry 8 } alaPimSGIAssertWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0)." ::= { alaPimSGIEntry 9 } alaPimSGIAssertWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the alaPimSGIAssertWinnerAddressType object." ::= { alaPimSGIEntry 10 } alaPimSGIAssertWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is zero." ::= { alaPimSGIEntry 11 } alaPimSGIAssertWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If alaPimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero." ::= { alaPimSGIEntry 12 } -- -- The PIM (S,G,rpt) State Table -- alaPimSGRptTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimSGRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (S,G,rpt) state that PIM has." REFERENCE "RFC 4601 section 4.1.5" ::= { alaPim 8 } alaPimSGRptEntry OBJECT-TYPE SYNTAX AlaPimSGRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimSGRptTable." INDEX { alaPimStarGAddressType, alaPimStarGGrpAddress, alaPimSGRptSrcAddress } ::= { alaPimSGRptTable 1 } AlaPimSGRptEntry ::= SEQUENCE { alaPimSGRptSrcAddress InetAddress, alaPimSGRptUpTime TimeTicks, alaPimSGRptUpstreamPruneState INTEGER, alaPimSGRptUpstreamOverrideTimer TimeTicks } alaPimSGRptSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry. The InetAddressType is given by the alaPimStarGAddressType object." ::= { alaPimSGRptEntry 1 } alaPimSGRptUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { alaPimSGRptEntry 2 } alaPimSGRptUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { rptNotJoined (1), pruned (2), notPruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.9" ::= { alaPimSGRptEntry 3 } alaPimSGRptUpstreamOverrideTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router sends a triggered (S,G,rpt) Join message on alaPimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.9" ::= { alaPimSGRptEntry 4 } -- -- The PIM (S,G,rpt,I) State Table -- alaPimSGRptITable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimSGRptIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (S,G,rpt) state that PIM has." REFERENCE "RFC 4601 section 4.1.5" ::= { alaPim 9 } alaPimSGRptIEntry OBJECT-TYPE SYNTAX AlaPimSGRptIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimSGRptITable." INDEX { alaPimStarGAddressType, alaPimStarGGrpAddress, alaPimSGRptSrcAddress, alaPimSGRptIIfIndex } ::= { alaPimSGRptITable 1 } AlaPimSGRptIEntry ::= SEQUENCE { alaPimSGRptIIfIndex InterfaceIndex, alaPimSGRptIUpTime TimeTicks, alaPimSGRptILocalMembership TruthValue, alaPimSGRptIJoinPruneState INTEGER, alaPimSGRptIPrunePendingTimer TimeTicks, alaPimSGRptIPruneExpiryTimer TimeTicks } alaPimSGRptIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { alaPimSGRptIEntry 1 } alaPimSGRptIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { alaPimSGRptIEntry 2 } alaPimSGRptILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_exclude(S,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6" ::= { alaPimSGRptIEntry 3 } alaPimSGRptIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), prune (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.4" ::= { alaPimSGRptIEntry 4 } alaPimSGRptIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.4" ::= { alaPimSGRptIEntry 5 } alaPimSGRptIPruneExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time." REFERENCE "RFC 4601 section 4.5.4" ::= { alaPimSGRptIEntry 6 } -- -- The PIM Static RP Table -- alaPimStaticRPTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create and manage static configuration of RPs. If the group prefixes configured for two or more rows in this table overlap, the row with the greatest value of alaPimStaticRPGrpPrefixLength is used for the overlapping range." REFERENCE "RFC 4601 section 3.7" ::= { alaPim 11 } alaPimStaticRPEntry OBJECT-TYPE SYNTAX AlaPimStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimStaticRPTable. This entry is preserved on agent restart." INDEX { alaPimStaticRPAddressType, alaPimStaticRPGrpAddress, alaPimStaticRPGrpPrefixLength } ::= { alaPimStaticRPTable 1 } AlaPimStaticRPEntry ::= SEQUENCE { alaPimStaticRPAddressType InetAddressType, alaPimStaticRPGrpAddress InetAddress, alaPimStaticRPGrpPrefixLength InetAddressPrefixLength, alaPimStaticRPRPAddress InetAddress, alaPimStaticRPPimMode AlaPimMode, alaPimStaticRPOverrideDynamic TruthValue, alaPimStaticRPPrecedence Unsigned32, alaPimStaticRPRowStatus RowStatus, alaPimStaticRPStorageType StorageType } alaPimStaticRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this entry." ::= { alaPimStaticRPEntry 1 } alaPimStaticRPGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address which, when combined with alaPimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the alaPimStaticRPAddressType object. This address object is only significant up to alaPimSGRPFRoutePrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry." ::= { alaPimStaticRPEntry 2 } alaPimStaticRPGrpPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group prefix length, which, when combined with alaPimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the alaPimStaticRPAddressType object. If alaPimStaticRPAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If alaPimStaticRPGrpAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128." ::= { alaPimStaticRPEntry 3 } alaPimStaticRPRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the alaPimStaticRPAddressType object." ::= { alaPimStaticRPEntry 4 } alaPimStaticRPPimMode OBJECT-TYPE SYNTAX AlaPimMode MAX-ACCESS read-create STATUS current DESCRIPTION "The PIM mode to be used for groups in this group prefix. If this object is set to ssm(2) or dm(5), then alaPimStaticRPRPAddress must be set to zero. No RP operations are ever possible for PIM Mode SSM or DM." REFERENCE "RFC 4601 section 3.7, RFC 3569 and I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable" DEFVAL { asm } ::= { alaPimStaticRPEntry 5 } alaPimStaticRPOverrideDynamic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this static RP configuration overrides RP information learned dynamically for groups in this group prefix." DEFVAL { false } ::= { alaPimStaticRPEntry 6 } alaPimStaticRPPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value for alaPimGroupMappingPrecedence to be used for this static RP configuration. This allows fine control over which configuration is overridden by this static configuration. If alaPimStaticRPOverrideDynamic is set to TRUE, all dynamic RP configuration is overridden by this static configuration, whatever the value of this object. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers. A setting of this object may have different effects when applied to other routers. Do not use this object unless fine control of static RP behavior on the local router is required. A value of 65535 is used to represent an 'undefined' value indicating that this object is not being used." ::= { alaPimStaticRPEntry 7 } alaPimStaticRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before valid values have been written to alaPimStaticRPRPAddress. All writeable objects in this entry can be modified when the status of this entry is active(1)." ::= { alaPimStaticRPEntry 8 } alaPimStaticRPStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { alaPimStaticRPEntry 9 } -- -- The PIM Group Mapping Table -- alaPimGroupMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaPimGroupMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this table are created for a variety of reasons, indicated by the value of the alaPimGroupMappingOrigin object. - Rows with a alaPimGroupMappingOrigin value of 'fixed' are created automatically by the router at startup, to correspond to the well-defined prefixes of link-local and unroutable group addresses. These rows are never destroyed. - Rows with a alaPimGroupMappingOrigin value of 'embedded' are created by the router to correspond to group prefixes that are to be treated as being in Embedded-RP format. - Rows with a alaPimGroupMappingOrigin value of 'configRp' are created and destroyed as a result of rows in the alaPimStaticRPTable being created and destroyed. - Rows with a alaPimGroupMappingOrigin value of 'configSsm' are created and destroyed as a result of configuration of SSM address ranges to the local router. - Rows with a alaPimGroupMappingOrigin value of 'bsr' are created as a result of running the PIM Bootstrap Router (BSR) mechanism. If the local router is not the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages received from the elected BSR. If the local router is the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages that the local router sends. In either case, these rows are destroyed when the group prefixes are timed out by the BSR mechanism. - Rows with a alaPimGroupMappingOrigin value of 'other' are created and destroyed according to some other mechanism not specified here. Given the collection of rows in this table at any point in time, the PIM mode and RP address to use for a particular group is determined using the following algorithm. 1. From the set of all rows, the subset whose group prefix contains the group in question are selected. 2. If there are no such rows, the behavior is undefined. 3. From the selected subset of rows, the subset that have the greatest value of alaPimGroupMappingGrpPrefixLength are selected. 4. If there are multiple selected rows, and a subset are defined by alaPimStaticRPTable (alaPimGroupMappingOrigin value of 'configRp') with alaPimStaticRPOverrideDynanic set to TRUE, then this subset is selected. 5. If there are still multiple selected rows, the subset that have the highest precedence (the lowest numerical value for alaPimGroupMappingPrecedence) are selected. 6. If there are still multiple selected rows, the row selected is implementation dependent; the implementation might or might not apply the PIM hash function to select the row. 7. The group mode to use is given by the value of alaPimGroupMappingPimMode from the single selected row; the RP to use is given by the value of alaPimGroupMappingRPAddress, unless alaPimGroupMappingOrigin is 'embedded', in which case the RP is extracted from the group address in question." REFERENCE "RFC 4601 section 3.7, RFC 3956 and RFC 4610" ::= { alaPim 13 } alaPimGroupMappingEntry OBJECT-TYPE SYNTAX AlaPimGroupMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the alaPimGroupMappingTable." INDEX { alaPimGroupMappingOrigin, alaPimGroupMappingAddressType, alaPimGroupMappingGrpAddress, alaPimGroupMappingGrpPrefixLength, alaPimGroupMappingRPAddressType, alaPimGroupMappingRPAddress } ::= { alaPimGroupMappingTable 1 } AlaPimGroupMappingEntry ::= SEQUENCE { alaPimGroupMappingOrigin AlaPimGroupMappingOriginType, alaPimGroupMappingAddressType InetAddressType, alaPimGroupMappingGrpAddress InetAddress, alaPimGroupMappingGrpPrefixLength InetAddressPrefixLength, alaPimGroupMappingRPAddressType InetAddressType, alaPimGroupMappingRPAddress InetAddress, alaPimGroupMappingPimMode AlaPimMode, alaPimGroupMappingPrecedence Unsigned32 } alaPimGroupMappingOrigin OBJECT-TYPE SYNTAX AlaPimGroupMappingOriginType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mechanism by which this group mapping was learned." ::= { alaPimGroupMappingEntry 1 } alaPimGroupMappingAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the IP multicast group prefix." ::= { alaPimGroupMappingEntry 2 } alaPimGroupMappingGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with alaPimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given by the alaPimGroupMappingAddressType object. This address object is only significant up to alaPimGroupMappingGrpPrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry." ::= { alaPimGroupMappingEntry 3 } alaPimGroupMappingGrpPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group prefix length, which, when combined with alaPimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by the alaPimGroupMappingAddressType object. If alaPimGroupMappingAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If alaPimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128." ::= { alaPimGroupMappingEntry 4 } alaPimGroupMappingRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the RP to be used for groups within this group prefix, or unknown(0) if no RP is to be used or if the RP address is unknown. This object must be unknown(0) if alaPimGroupMappingPimMode is ssm(2) or dm(5), or if alaPimGroupMappingOrigin is embedded(6)." ::= { alaPimGroupMappingEntry 5 } alaPimGroupMappingRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the alaPimGroupMappingRPAddressType object." ::= { alaPimGroupMappingEntry 6 } alaPimGroupMappingPimMode OBJECT-TYPE SYNTAX AlaPimMode MAX-ACCESS read-only STATUS current DESCRIPTION "The PIM mode to be used for groups in this group prefix." ::= { alaPimGroupMappingEntry 7 } alaPimGroupMappingPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for this object indicate lower precedences, with the value zero denoting the highest precedence. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers." ::= { alaPimGroupMappingEntry 8 } -- -- PIM Notifications -- alaPimNeighborLoss NOTIFICATION-TYPE OBJECTS { alaPimNeighborUpTime } STATUS current DESCRIPTION "A alaPimNeighborLoss notification signifies the loss of an adjacency with a neighbor. This notification should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with the same IP version and a lower IP address than itself. This notification is generated whenever the counter alaPimNeighborLossCount is incremented, subject to the rate limit specified by alaPimNeighborLossNotificationPeriod." REFERENCE "RFC 4601 section 4.3.2" ::= { alaPimNotifications 1 } alaPimInvalidRegister NOTIFICATION-TYPE OBJECTS { alaPimGroupMappingPimMode, alaPimInvalidRegisterAddressType, alaPimInvalidRegisterOrigin, alaPimInvalidRegisterGroup, alaPimInvalidRegisterRp } STATUS current DESCRIPTION "A alaPimInvalidRegister notification signifies that an invalid PIM Register message was received by this device. This notification is generated whenever the counter alaPimInvalidRegisterMsgsRcvd is incremented, subject to the rate limit specified by alaPimInvalidRegisterNotificationPeriod." REFERENCE "RFC 4601 section 4.4.2" ::= { alaPimNotifications 2 } alaPimInvalidJoinPrune NOTIFICATION-TYPE OBJECTS { alaPimGroupMappingPimMode, alaPimInvalidJoinPruneAddressType, alaPimInvalidJoinPruneOrigin, alaPimInvalidJoinPruneGroup, alaPimInvalidJoinPruneRp, alaPimNeighborUpTime } STATUS current DESCRIPTION "A alaPimInvalidJoinPrune notification signifies that an invalid PIM Join/Prune message was received by this device. This notification is generated whenever the counter alaPimInvalidJoinPruneMsgsRcvd is incremented, subject to the rate limit specified by alaPimInvalidJoinPruneNotificationPeriod." REFERENCE "RFC 4601 section 4.5.2" ::= { alaPimNotifications 3 } alaPimRPMappingChange NOTIFICATION-TYPE OBJECTS { alaPimGroupMappingPimMode, alaPimGroupMappingPrecedence } STATUS current DESCRIPTION "A alaPimRPMappingChange notification signifies a change to the active RP mapping on this device. This notification is generated whenever the counter alaPimRPMappingChangeCount is incremented, subject to the rate limit specified by alaPimRPMappingChangeNotificationPeriod." ::= { alaPimNotifications 4 } alaPimInterfaceElection NOTIFICATION-TYPE OBJECTS { alaPimInterfaceAddressType, alaPimInterfaceAddress } STATUS current DESCRIPTION "A alaPimInterfaceElection notification signifies that a new DR or DR has been elected on a network. This notification is generated whenever the counter alaPimInterfaceElectionsWinCount is incremented, subject to the rate limit specified by alaPimInterfaceElectionNotificationPeriod." REFERENCE "RFC 4601 section 4.3.2 and I-D.ietf-pim-bidir section 3.5.2" ::= { alaPimNotifications 5 } -- -- Conformance Information -- alaPimMIBConformance OBJECT IDENTIFIER ::= { alaPimStdMIB 2 } alaPimMIBCompliances OBJECT IDENTIFIER ::= { alaPimMIBConformance 1 } alaPimMIBGroups OBJECT IDENTIFIER ::= { alaPimMIBConformance 2 } -- -- Compliance Statements -- alaPimMIBComplianceAsm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the PIM-SM MIB." MODULE -- this module MANDATORY-GROUPS { alaPimTopologyGroup, alaPimSsmGroup, alaPimRPConfigGroup, alaPimSmGroup } GROUP alaPimNotificationGroup DESCRIPTION "This group is optional." GROUP alaPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP alaPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP alaPimStaticRPPrecedenceGroup DESCRIPTION "This group is optional." GROUP alaPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP alaPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP alaPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP alaPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { alaPimMIBCompliances 1 } alaPimMIBComplianceSsm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for PIM SSM MIB." MODULE -- this module MANDATORY-GROUPS { alaPimTopologyGroup, alaPimSsmGroup } GROUP alaPimNotificationGroup DESCRIPTION "This group is optional." GROUP alaPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP alaPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP alaPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP alaPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP alaPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP alaPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { alaPimMIBCompliances 3 } alaPimMIBComplianceDm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for PIM-DM MIB." MODULE -- this module MANDATORY-GROUPS { alaPimTopologyGroup, alaPimSsmGroup, alaPimRPConfigGroup, alaPimSmGroup, alaPimDmGroup } GROUP alaPimNotificationGroup DESCRIPTION "This group is optional." GROUP alaPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP alaPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP alaPimStaticRPPrecedenceGroup DESCRIPTION "This group is optional." GROUP alaPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP alaPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP alaPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP alaPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { alaPimMIBCompliances 4 } -- -- Units of Conformance -- alaPimTopologyGroup OBJECT-GROUP OBJECTS { alaPimInterfaceAddressType, alaPimInterfaceAddress, alaPimInterfaceGenerationIDValue, alaPimInterfaceDR, alaPimInterfaceDRPriorityEnabled, alaPimInterfaceHelloHoldtime, alaPimInterfaceJoinPruneHoldtime, alaPimInterfaceLanDelayEnabled, alaPimInterfaceEffectPropagDelay, alaPimInterfaceEffectOverrideIvl, alaPimInterfaceSuppressionEnabled, alaPimInterfaceBidirCapable, alaPimNeighborGenerationIDPresent, alaPimNeighborGenerationIDValue, alaPimNeighborUpTime, alaPimNeighborExpiryTime, alaPimNeighborDRPriorityPresent, alaPimNeighborDRPriority, alaPimNeighborLanPruneDelayPresent, alaPimNeighborTBit, alaPimNeighborPropagationDelay, alaPimNeighborOverrideInterval, alaPimNeighborBidirCapable, alaPimNbrSecAddress } STATUS current DESCRIPTION "A collection of read-only objects used to report local PIM topology." ::= { alaPimMIBGroups 1 } alaPimNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { alaPimNeighborLoss } STATUS current DESCRIPTION "A collection of notifications for signaling important PIM events." ::= { alaPimMIBGroups 2 } alaPimTuningParametersGroup OBJECT-GROUP OBJECTS { alaPimKeepalivePeriod, alaPimRegisterSuppressionTime, alaPimInterfaceDRPriority, alaPimInterfaceHelloInterval, alaPimInterfaceTrigHelloInterval, alaPimInterfaceJoinPruneInterval, alaPimInterfacePropagationDelay, alaPimInterfaceOverrideInterval, alaPimInterfaceDomainBorder, alaPimInterfaceStubInterface, alaPimInterfaceStatus, alaPimInterfaceStorageType } STATUS current DESCRIPTION "A collection of writeable objects used to configure PIM behavior and to tune performance." ::= { alaPimMIBGroups 3 } alaPimRouterStatisticsGroup OBJECT-GROUP OBJECTS { alaPimStarGEntries, alaPimStarGIEntries, alaPimSGEntries, alaPimSGIEntries, alaPimSGRptEntries, alaPimSGRptIEntries } STATUS current DESCRIPTION "A collection of statistics global to the PIM router." ::= { alaPimMIBGroups 4 } alaPimSsmGroup OBJECT-GROUP OBJECTS { alaPimSGUpTime, alaPimSGPimMode, alaPimSGUpstreamJoinState, alaPimSGUpstreamJoinTimer, alaPimSGUpstreamNeighbor, alaPimSGRPFIfIndex, alaPimSGRPFNextHopType, alaPimSGRPFNextHop, alaPimSGRPFRouteProtocol, alaPimSGRPFRouteAddress, alaPimSGRPFRoutePrefixLength, alaPimSGRPFRouteMetricPref, alaPimSGRPFRouteMetric, alaPimSGSPTBit, alaPimSGKeepaliveTimer, alaPimSGDRRegisterState, alaPimSGDRRegisterStopTimer, alaPimSGRPRegisterPMBRAddressType, alaPimSGRPRegisterPMBRAddress, alaPimSGIUpTime, alaPimSGILocalMembership, alaPimSGIJoinPruneState, alaPimSGIPrunePendingTimer, alaPimSGIJoinExpiryTimer, alaPimSGIAssertState, alaPimSGIAssertTimer, alaPimSGIAssertWinnerAddressType, alaPimSGIAssertWinnerAddress, alaPimSGIAssertWinnerMetricPref, alaPimSGIAssertWinnerMetric } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running the PIM SSM (Source Specific Multicast) protocol, in PIM mode SM (Sparse Mode)." ::= { alaPimMIBGroups 5 } alaPimRPConfigGroup OBJECT-GROUP OBJECTS { alaPimStaticRPRPAddress, alaPimStaticRPPimMode, alaPimStaticRPOverrideDynamic, alaPimStaticRPRowStatus, alaPimStaticRPStorageType, alaPimGroupMappingPimMode, alaPimGroupMappingPrecedence } STATUS current DESCRIPTION "A collection of objects to support configuration of RPs (Rendezvous Points) and Group Mappings." ::= { alaPimMIBGroups 6 } alaPimSmGroup OBJECT-GROUP OBJECTS { alaPimStarGUpTime, alaPimStarGPimMode, alaPimStarGRPAddressType, alaPimStarGRPAddress, alaPimStarGPimModeOrigin, alaPimStarGRPIsLocal, alaPimStarGUpstreamJoinState, alaPimStarGUpstreamJoinTimer, alaPimStarGUpstreamNeighborType, alaPimStarGUpstreamNeighbor, alaPimStarGRPFIfIndex, alaPimStarGRPFNextHopType, alaPimStarGRPFNextHop, alaPimStarGRPFRouteProtocol, alaPimStarGRPFRouteAddress, alaPimStarGRPFRoutePrefixLength, alaPimStarGRPFRouteMetricPref, alaPimStarGRPFRouteMetric, alaPimStarGIUpTime, alaPimStarGILocalMembership, alaPimStarGIJoinPruneState, alaPimStarGIPrunePendingTimer, alaPimStarGIJoinExpiryTimer, alaPimStarGIAssertState, alaPimStarGIAssertTimer, alaPimStarGIAssertWinnerAddressType, alaPimStarGIAssertWinnerAddress, alaPimStarGIAssertWinnerMetricPref, alaPimStarGIAssertWinnerMetric, alaPimSGRptUpTime, alaPimSGRptUpstreamPruneState, alaPimSGRptUpstreamOverrideTimer, alaPimSGRptIUpTime, alaPimSGRptILocalMembership, alaPimSGRptIJoinPruneState, alaPimSGRptIPrunePendingTimer, alaPimSGRptIPruneExpiryTimer } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running PIM-SM (Sparse Mode). The groups alaPimSsmGroup and alaPimRPConfigGroup are also required." ::= { alaPimMIBGroups 7 } alaPimStaticRPPrecedenceGroup OBJECT-GROUP OBJECTS { alaPimStaticRPPrecedence } STATUS current DESCRIPTION "A collection of objects to allow fine control of interactions between static RP configuration and dynamically acquired group to RP mappings." ::= { alaPimMIBGroups 10 } alaPimNetMgmtNotificationObjects OBJECT-GROUP OBJECTS { alaPimInvalidRegisterNotificationPeriod, alaPimInvalidRegisterMsgsRcvd, alaPimInvalidRegisterAddressType, alaPimInvalidRegisterOrigin, alaPimInvalidRegisterGroup, alaPimInvalidRegisterRp, alaPimInvalidJoinPruneNotificationPeriod, alaPimInvalidJoinPruneMsgsRcvd, alaPimInvalidJoinPruneAddressType, alaPimInvalidJoinPruneOrigin, alaPimInvalidJoinPruneGroup, alaPimInvalidJoinPruneRp, alaPimRPMappingNotificationPeriod, alaPimRPMappingChangeCount, alaPimInterfaceElectionNotificationPeriod, alaPimInterfaceElectionWinCount } STATUS current DESCRIPTION "A collection of objects to support notification of PIM network management events." ::= { alaPimMIBGroups 11 } alaPimNetMgmtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { alaPimInvalidRegister, alaPimInvalidJoinPrune, alaPimRPMappingChange, alaPimInterfaceElection } STATUS current DESCRIPTION "A collection of notifications for signaling PIM network management events." ::= { alaPimMIBGroups 12 } alaPimDiagnosticsGroup OBJECT-GROUP OBJECTS { alaPimInAsserts, alaPimOutAsserts, alaPimLastAssertInterface, alaPimLastAssertGroupAddressType, alaPimLastAssertGroupAddress, alaPimLastAssertSourceAddressType, alaPimLastAssertSourceAddress, alaPimNeighborLossNotificationPeriod, alaPimNeighborLossCount } STATUS current DESCRIPTION "Objects providing additonal diagnostics related to a PIM router." ::= { alaPimMIBGroups 13 } alaPimDmGroup OBJECT-GROUP OBJECTS { alaPimRefreshInterval, alaPimInterfacePruneLimitInterval, alaPimInterfaceGraftRetryInterval, alaPimInterfaceSRPriorityEnabled, alaPimNeighborSRCapable, alaPimSGUpstreamPruneState, alaPimSGUpstreamPruneLimitTimer, alaPimSGOriginatorState, alaPimSGSourceActiveTimer, alaPimSGStateRefreshTimer } STATUS current DESCRIPTION "A collection of objects required for management of PIM Dense Mode (PIM-DM) function. The groups alaPimSsmGroup and alaPimSmGroup are also required." REFERENCE "RFC 3973" ::= { alaPimMIBGroups 14 } alaPimDeviceStorageGroup OBJECT-GROUP OBJECTS { alaPimDeviceConfigStorageType } STATUS current DESCRIPTION "An object that specifies the volatility of global PIM configuration settings on this device." ::= { alaPimMIBGroups 15 } END