WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

commit version 22.12.12447

Browse Source
This commit is contained in:
Chris Hammer
2023-01-01 22:36:12 -05:00
parent af1b03d79f
commit b948283a96
744 changed files with 620715 additions and 27381 deletions
Download Patch File Download Diff File Expand all files Collapse all files

313
mibs/netping/DKSF-561-1-X-X-1 Normal file
View File

@ -0,0 +1,313 @@
DKSF-561-1-X-X-1 DEFINITIONS ::= BEGIN
IMPORTS
enterprises,
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
sysName
FROM SNMPv2-MIB ;
netPingIOv3 MODULE-IDENTITY
LAST-UPDATED "202110070000Z"
ORGANIZATION "Alentis Electronics"
CONTACT-INFO "developers@netping.ru"
DESCRIPTION "MIB for NetPing IO v3 (254R301) remote sensing and control"
REVISION "202110070000Z"
DESCRIPTION "npIoLineN fixed, range must be 1..4; npPwrChannelN fixed, range must be 1..2"
REVISION "202011060000Z"
DESCRIPTION "Initial release"
::= { lightcom 561 }
lightcom OBJECT IDENTIFIER::={enterprises 25728 }
npPwr OBJECT IDENTIFIER::={ lightcom 5800 }
npPwrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpPwrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Watchdog and outlet/relay control table"
::= { npPwr 3 }
npPwrEntry OBJECT-TYPE
SYNTAX NpPwrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Watchdog control table row"
INDEX { npPwrChannelN }
::= { npPwrTable 1 }
NpPwrEntry ::= SEQUENCE {
npPwrChannelN INTEGER,
npPwrStartReset INTEGER,
npPwrResetsCounter INTEGER,
npPwrRepeatingResetsCounter INTEGER,
npPwrMemo DisplayString
}
npPwrChannelN OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The id of watchdog/power channel"
::= { npPwrEntry 1 }
npPwrStartReset OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Deprecated in current FW version: Write 1 to start forced reset.
On read:
0 - normal operation
1 - reset is active
2 - reboot pause is active or watchdog is inactive"
::={npPwrEntry 2}
npPwrResetsCounter OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Counter of watchdog resets
Write 0 to clear."
::={npPwrEntry 4}
npPwrRepeatingResetsCounter OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter of continous failed
watchdog resets"
::={npPwrEntry 5}
npPwrMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Watchdog channel memo"
::={npPwrEntry 6}
npPwrWdogTrapData OBJECT IDENTIFIER::={ npPwr 2 }
npPwrWdogTrapN OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "No of Watchdog channel / output relay"
::= { npPwrWdogTrapData 1 }
npPwrWdogTrapMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Watchdog/Relay memo"
::={npPwrWdogTrapData 6}
npPwrWdogTrapFailBitmap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Failed adresses, bit 0 - A, bit 1 - B, bit 2 - C"
::= { npPwrWdogTrapData 13 }
npPwrWdogTrap OBJECT IDENTIFIER::={npPwr 6}
npPwrWdogTrapReset NOTIFICATION-TYPE
OBJECTS {
npPwrWdogTrapN,
npPwrWdogTrapMemo,
npPwrWdogTrapFailBitmap
}
STATUS current
DESCRIPTION
"Watchdog reset started"
::= { npPwrWdogTrap 100 }
npPwrWdogTrapSuspended NOTIFICATION-TYPE
OBJECTS {
npPwrWdogTrapN,
npPwrWdogTrapMemo
}
STATUS current
DESCRIPTION
"Watchdog resets suspended because of no effect"
::= { npPwrWdogTrap 101 }
npPwrWdogTrapResumed NOTIFICATION-TYPE
OBJECTS {
npPwrWdogTrapN,
npPwrWdogTrapMemo
}
STATUS current
DESCRIPTION
"Watchdog normal operation resumed, successful ping after resets was suspended"
::= { npPwrWdogTrap 102 }
npIo OBJECT IDENTIFIER::={lightcom 8900}
npIoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpIoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Digital Input/output Table"
::= { npIo 1 }
npIoEntry OBJECT-TYPE
SYNTAX NpIoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Digital Input/output Table Row"
INDEX { npIoLineN }
::= { npIoTable 1 }
NpIoEntry ::= SEQUENCE {
npIoLineN INTEGER,
npIoLevelIn INTEGER,
npIoLevelOut INTEGER,
npIoMemo DisplayString,
npIoPulseCounter Counter32,
npIoSinglePulseDuration INTEGER,
npIoSinglePulseStart INTEGER
}
npIoLineN OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of IO line, from 1 to max supported"
::= { npIoEntry 1 }
npIoLevelIn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input level, 0 or 1"
::= { npIoEntry 2 }
npIoLevelOut OBJECT-TYPE
SYNTAX INTEGER {
flip(-1),
low(0),
high(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Output level, 0 or 1.
Write -1 to flip output."
::= { npIoEntry 3 }
npIoMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IO line memo"
::= { npIoEntry 6 }
npIoPulseCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset."
::= { npIoEntry 9 }
npIoSinglePulseDuration OBJECT-TYPE
SYNTAX INTEGER (100..25500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms"
::= { npIoEntry 12 }
npIoSinglePulseStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration"
::= { npIoEntry 13 }
npIoTraps OBJECT IDENTIFIER::={npIo 2}
npIoTrapPrefix OBJECT IDENTIFIER::={npIoTraps 0}
npIoTrapLineN OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, Number of IO line"
::= { npIoTraps 1 }
npIoTrapLevelIn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, new Input level, 0 or 1"
::= { npIoTraps 2 }
npIoTrapMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, IO line memo"
::= { npIoTraps 6 }
npIoTrapLevelLegend OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Legend for current logic level on the IO line"
::= { npIoTraps 7 }
npIoTrap NOTIFICATION-TYPE
OBJECTS {
npIoTrapLineN,
npIoTrapLevelIn,
npIoTrapMemo,
npIoTrapLevelLegend
}
STATUS current
DESCRIPTION
"Input state of IO line is changed"
::= { npIoTrapPrefix 1 }
npReboot OBJECT IDENTIFIER::={ lightcom 911 }
npSoftReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to reboot device after
current operations completition"
::= { npReboot 1 }
npResetStack OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to re-initialize network
stack"
::= { npReboot 2 }
npForcedReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to immediate forced reboot"
::= { npReboot 3 }
END

1254
mibs/netping/DKSF-57-1-X-X-1 Normal file
View File

File diff suppressed because it is too large Load Diff

123
mibs/netping/DKSF-60-4-X-X-X
View File

@ -21,14 +21,26 @@ IMPORTS
netPing MODULE-IDENTITY
LAST-UPDATED "201411210000Z"
LAST-UPDATED "201601140000Z"
ORGANIZATION "NetPing East, Alentis Electronics"
CONTACT-INFO
"developers@netping.ru"
DESCRIPTION
"Generic MIB for NetPing remote sensing and control"
REVISION "201601140000Z"
DESCRIPTION
"npIrStatus values changed"
REVISION "201509240000Z"
DESCRIPTION
"npElecMeter branch added"
REVISION "201411210000Z"
REVISION "201504090000Z"
DESCRIPTION
"npRelHumTrap added; npIoTrapLevelLegend added"
REVISION "201411210000Z"
DESCRIPTION
"npRelayFlip variable max-access bugfix"
@ -518,11 +530,19 @@ npIoTrapMemo OBJECT-TYPE
DESCRIPTION "Trap data, IO line memo"
::= { npIoTraps 6 }
npIoTrapLevelLegend OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Legend for current logic level on the IO line"
::= { npIoTraps 7 }
npIoTrap NOTIFICATION-TYPE
OBJECTS {
npIoTrapLineN,
npIoTrapLevelIn,
npIoTrapMemo
npIoTrapMemo,
npIoTrapLevelLegend
}
STATUS current
DESCRIPTION
@ -741,8 +761,24 @@ npRelHumSensorValueT100 OBJECT-TYPE
STATUS current
DESCRIPTION "Sensor temperature, deg.C * 100 (fixed point two decimal places)
Used to get access to the fractional part of T value"
::= { npRelHumSensor 9 }
::= { npRelHumSensor 9 }
npRelHumTraps OBJECT IDENTIFIER::={npRelHumidity 9}
npRelHumTrapPrefix OBJECT IDENTIFIER::={npRelHumTraps 0}
npRelHumTrap NOTIFICATION-TYPE
OBJECTS {
npRelHumSensorStatusH,
npRelHumSensorValueH,
npRelHumSafeRangeHigh,
npRelHumSafeRangeLow
}
STATUS current
DESCRIPTION
"Status of Relative Humidity RH sensor has changed!"
::= { npRelHumTrapPrefix 1 }
npIr OBJECT IDENTIFIER::={lightcom 7900}
npIrCtrl OBJECT IDENTIFIER::={npIr 1}
@ -764,16 +800,83 @@ npIrReset OBJECT-TYPE
npIrStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
busyCaptureWaitingButton (1),
busyCaptureWaitingIr (2),
busyPlayback (3),
error (255)
commandCompleted (0),
protocolError (1),
commandAccepted (2),
errorUnknown (16),
errorBadNumber (17),
errorEmptyRecord (18),
errorFlashChip (19),
errorTimeout (20),
errorExtBusBusy (21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IR transiever status"
::= { npIrCtrl 3 }
npElecMeter OBJECT IDENTIFIER::={lightcom 9700}
npElecTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpElecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Electricity Meter Table"
::= { npElecMeter 1 }
npElecEntry OBJECT-TYPE
SYNTAX NpElecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Electricity Meter Table Table Row"
INDEX { npElecIndex }
::= { npElecTable 1 }
NpElecEntry ::= SEQUENCE {
npElecIndex INTEGER,
npElecPulsesPerKwh INTEGER,
npElecPower Gauge32,
npElecEnergy Counter32,
npElecEnergy100 Counter32
}
npElecIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of elec.meter, associated with IO line"
::= { npElecEntry 1 }
npElecPulsesPerKwh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Pulses on IO line input per 1 kWh of consumed energy"
::= { npElecEntry 2 }
npElecPower OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power, Watts, based on pulse rate/interval, 5 minute average"
::= { npElecEntry 3 }
npElecEnergy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Energy counter, kWh, based on pulse count"
::= { npElecEntry 4 }
npElecEnergy100 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Energy counter, kWh*100, based on pulse count"
::= { npElecEntry 5 }
npReboot OBJECT IDENTIFIER::={ lightcom 911 }

800
mibs/netping/DKSF-70-3-X-X-1
View File

@ -1,800 +0,0 @@
DKSF-70-3-X-X-1 DEFINITIONS ::= BEGIN
IMPORTS
enterprises,
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32,
Counter64,
Integer32,
TimeTicks,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
TruthValue,
TimeStamp
FROM SNMPv2-TC
snmpTraps
FROM SNMPv2-MIB ;
uniPingServerSolutionV3 MODULE-IDENTITY
LAST-UPDATED "201411260000Z"
ORGANIZATION "Alentis Electronics"
CONTACT-INFO
"developers@netping.ru"
DESCRIPTION
"Generic MIB for NetPing remote sensing and control"
REVISION "201411260000Z"
DESCRIPTION
"npRelayN, npRelayMode, npIoLineN, npRelHumSensorStatusH, npRelHumSensorStatus values changed"
REVISION "201402020000Z"
DESCRIPTION
"npRelayMode valid values changed, (3) excluded "
REVISION "201401290000Z"
DESCRIPTION
"npCurLoop, npRelHumidity, npIr branches has added"
REVISION "201401210000Z"
DESCRIPTION
"partial rewrite for DKSF 70"
REVISION "201304110000Z"
DESCRIPTION
"partial rewrite for DKSF 48"
REVISION "201205310000Z"
DESCRIPTION
"npPwrRelayState branch was added"
REVISION "201204170000Z"
DESCRIPTION
"npReboot branch was added"
REVISION "201203230000Z"
DESCRIPTION
"Minor changes to IR module for IRC-TRv2"
REVISION "201109230000Z"
DESCRIPTION
"4 IO lines,
Identification is changed from DKSF 52.4 to DKSF 52.5"
REVISION "201103240000Z"
DESCRIPTION
"npIoPulseCounter, npIoSinglePulseDuration, npIoSinglePulseStart is added
Identification is changed from DKSF 52.3 to DKSF 52.4"
REVISION "201010140000Z"
DESCRIPTION
"IR module support"
REVISION "201009200000Z"
DESCRIPTION
"dksf 52.3 subversion"
REVISION "201005310000Z"
DESCRIPTION
"dksf 51.3 subversion"
REVISION "201004140000Z"
DESCRIPTION
"SMIv2-style rewrite"
::= { lightcom 70 }
lightcom OBJECT IDENTIFIER::={enterprises 25728 }
npTrapInfo OBJECT IDENTIFIER::={lightcom 90}
npTrapEmailTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "user-specified e-mail for NetPing Trap Forwarding Service"
::={npTrapInfo 1}
npRelay OBJECT IDENTIFIER::={ lightcom 5500 }
npRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpRelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Watchdog and outlet/relay control table"
::= { npRelay 5 }
npRelayEntry OBJECT-TYPE
SYNTAX NpRelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Relay/outlet table row"
INDEX { npRelayN }
::= { npRelayTable 1 }
NpRelayEntry ::= SEQUENCE {
npRelayN INTEGER,
npRelayMode INTEGER,
npRelayStartReset INTEGER,
npRelayMemo DisplayString,
npRelayState INTEGER
-- not in dksf70 npRelayPowered INTEGER
}
npRelayN OBJECT-TYPE
SYNTAX INTEGER (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The N of output relay"
::= { npRelayEntry 1 }
npRelayMode OBJECT-TYPE
SYNTAX INTEGER {
flip(-1),
off(0),
on(1),
logic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control of relay:
-1 - flip, works only for manual On and Off state
0 - manual off
1 - manual on
4 - logic"
::={npRelayEntry 2}
npRelayStartReset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to start reset (switch relay off for some time)"
::={npRelayEntry 3}
npRelayMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relay memo"
::={npRelayEntry 6}
npRelayState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on"
::={npRelayEntry 15}
-- npRelayPowered OBJECT-TYPE
-- SYNTAX INTEGER {
-- no(0),
-- yes(1)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "AC presence on output.
-- 0 - no AC dew to relay switched off or no ac on input
-- 1 - AC is present"
-- ::={npRelayEntry 16}
npThermo OBJECT IDENTIFIER::={lightcom 8800}
npThermoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpThermoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Thermo Sensors Table"
::= { npThermo 1 }
npThermoEntry OBJECT-TYPE
SYNTAX NpThermoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Thermo Sensors Table Row"
INDEX { npThermoSensorN }
::= { npThermoTable 1 }
NpThermoEntry ::= SEQUENCE {
npThermoSensorN INTEGER,
npThermoValue INTEGER,
npThermoStatus INTEGER,
npThermoLow INTEGER,
npThermoHigh INTEGER,
npThermoMemo DisplayString
}
npThermoSensorN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The id of temperature sensor, 1 to 8"
::= { npThermoEntry 1 }
npThermoValue OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature, deg.C"
::= { npThermoEntry 2 }
npThermoStatus OBJECT-TYPE
SYNTAX INTEGER {
failed(0),
low(1),
norm(2),
high(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)"
::= { npThermoEntry 3 }
npThermoLow OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bottom margin of normal temperature range, deg.C"
::= { npThermoEntry 4 }
npThermoHigh OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Top margin of normal temperature range, deg.C"
::= { npThermoEntry 5 }
npThermoMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "T channel memo"
::= { npThermoEntry 6 }
npThermoTraps OBJECT IDENTIFIER::={npThermo 2}
npThermoTrapPrefix OBJECT IDENTIFIER::={npThermoTraps 0}
npThermoTrapSensorN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The id of temperature sensor, 1 to 8"
::= { npThermoTraps 1 }
npThermoTrapValue OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature, deg.C"
::= { npThermoTraps 2 }
npThermoTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
failed(0),
low(1),
norm(2),
high(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)"
::= { npThermoTraps 3 }
npThermoTrapLow OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bottom margin of normal temperature range, deg.C"
::= { npThermoTraps 4 }
npThermoTrapHigh OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Top margin of normal temperature range, deg.C"
::= { npThermoTraps 5 }
npThermoTrapMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "T channel memo"
::= { npThermoTraps 6 }
npThermoTrap NOTIFICATION-TYPE
OBJECTS {
npThermoTrapSensorN,
npThermoTrapValue,
npThermoTrapStatus,
npThermoTrapLow,
npThermoTrapHigh,
npThermoTrapMemo
}
STATUS current
DESCRIPTION
"Status of Thermo sensor is changed (crossing of normal temp. range)"
::= { npThermoTrapPrefix 1 }
npIo OBJECT IDENTIFIER::={lightcom 8900}
npIoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpIoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Digital Input/output Table"
::= { npIo 1 }
npIoEntry OBJECT-TYPE
SYNTAX NpIoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Digital Input/output Table Row"
INDEX { npIoLineN }
::= { npIoTable 1 }
NpIoEntry ::= SEQUENCE {
npIoLineN INTEGER,
npIoLevelIn INTEGER,
npIoLevelOut INTEGER,
npIoMemo DisplayString,
npIoPulseCounter Counter32,
npIoSinglePulseDuration INTEGER,
npIoSinglePulseStart INTEGER
}
npIoLineN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of IO line, from 1 to max supported"
::= { npIoEntry 1 }
npIoLevelIn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input level, 0 or 1"
::= { npIoEntry 2 }
npIoLevelOut OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Output level, 0 or 1"
::= { npIoEntry 3 }
npIoMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IO line memo"
::= { npIoEntry 6 }
npIoPulseCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset."
::= { npIoEntry 9 }
npIoSinglePulseDuration OBJECT-TYPE
SYNTAX INTEGER (100..25500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms"
::= { npIoEntry 12 }
npIoSinglePulseStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration"
::= { npIoEntry 13 }
npIoTraps OBJECT IDENTIFIER::={npIo 2}
npIoTrapPrefix OBJECT IDENTIFIER::={npIoTraps 0}
npIoTrapLineN OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, Number of IO line"
::= { npIoTraps 1 }
npIoTrapLevelIn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, new Input level, 0 or 1"
::= { npIoTraps 2 }
npIoTrapMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, IO line memo"
::= { npIoTraps 6 }
npIoTrap NOTIFICATION-TYPE
OBJECTS {
npIoTrapLineN,
npIoTrapLevelIn,
npIoTrapMemo
}
STATUS current
DESCRIPTION
"Input state of IO line is changed"
::= { npIoTrapPrefix 1 }
npCurLoop OBJECT IDENTIFIER::={lightcom 8300}
npCurLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpCurLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current loop sensors Table"
::= { npCurLoop 1 }
npCurLoopEntry OBJECT-TYPE
SYNTAX NpCurLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current loop sensors Table Row"
INDEX { npCurLoopN }
::= { npCurLoopTable 1 }
NpCurLoopEntry ::= SEQUENCE {
npCurLoopN INTEGER,
npCurLoopStatus INTEGER,
npCurLoopI INTEGER,
npCurLoopV INTEGER,
npCurLoopR INTEGER,
npCurLoopPower INTEGER
}
npCurLoopN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of current loop, 1 to max supported"
::= { npCurLoopEntry 1 }
npCurLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
alert(1),
cut(2),
short(3),
notPowered(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the loop
0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered"
::= { npCurLoopEntry 2 }
npCurLoopI OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loop current, mA"
::= { npCurLoopEntry 3 }
npCurLoopV OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voltage drop on the loop, mV"
::= { npCurLoopEntry 4 }
npCurLoopR OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resistance of the loop, Ohm"
::= { npCurLoopEntry 5 }
npCurLoopPower OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
cyclePower(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control of loop power
0=Off, 1=On, 2=reset by off/on power"
::= { npCurLoopEntry 7 }
npCurLoopTraps OBJECT IDENTIFIER::={npCurLoop 2}
npCurLoopTrapPrefix OBJECT IDENTIFIER::={npCurLoopTraps 0}
npCurLoopTrapN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of current loop, which status has changed"
::= { npCurLoopTraps 1 }
npCurLoopTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
alert(1),
cut(2),
short(3),
notPowered(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the loop
0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered"
::= { npCurLoopTraps 2 }
npCurLoopTrapI OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loop current, mA"
::= { npCurLoopTraps 3 }
npCurLoopTrapV OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voltage drop on the loop, mV"
::= { npCurLoopTraps 4 }
npCurLoopTrapR OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resistance of the loop, Ohm"
::= { npCurLoopTraps 5 }
npCurLoopTrapPower OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of loop power
0=Off, 1=On"
::= { npCurLoopTraps 7 }
npCurLoopTrap NOTIFICATION-TYPE
OBJECTS {
npCurLoopTrapN,
npCurLoopTrapStatus,
npCurLoopTrapI,
npCurLoopTrapV,
npCurLoopTrapR,
npCurLoopTrapPower,
npTrapEmailTo
}
STATUS current
DESCRIPTION
"Status of current loop N has changed!"
::= { npCurLoopTrapPrefix 1 }
npRelHumidity OBJECT IDENTIFIER::={lightcom 8400}
npRelHumSensor OBJECT IDENTIFIER::={npRelHumidity 2}
npRelHumSensorStatus OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the Rel.Humidity Sensor One
1=Normal, 0=Error or Sensor isn't connected"
::= { npRelHumSensor 3 }
npRelHumSensorValueH OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relative humidity value, %"
::= { npRelHumSensor 2 }
npRelHumSensorValueT OBJECT-TYPE
SYNTAX INTEGER (-60..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sensor temperature, deg.C"
::= { npRelHumSensor 4 }
npRelHumSensorStatusH OBJECT-TYPE
SYNTAX INTEGER {
sensorFailed(0),
belowSafeRange(1),
inSafeRange(2),
aboveSafeRange(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of Relative Humiduty"
::= { npRelHumSensor 5 }
npRelHumSafeRangeHigh OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relative Humidity safe range, top margin, %RH"
::= { npRelHumSensor 7 }
npRelHumSafeRangeLow OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relative Humidity safe range, bottom margin, %RH"
::= { npRelHumSensor 8 }
npRelHumSensorValueT100 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sensor temperature, deg.C * 100 (fixed point two decimal places)
Used to get access to the fractional part of T value"
::= { npRelHumSensor 9 }
npRelHumTraps OBJECT IDENTIFIER::={npRelHumidity 9}
npRelHumTrapPrefix OBJECT IDENTIFIER::={npRelHumTraps 0}
npRelHumTrap NOTIFICATION-TYPE
OBJECTS {
npRelHumSensorStatusH,
npRelHumSensorValueH,
npRelHumSafeRangeHigh,
npRelHumSafeRangeLow,
npTrapEmailTo
}
STATUS current
DESCRIPTION
"Status of Relative Humidity RH sensor has changed!"
::= { npRelHumTrapPrefix 1 }
npGsm OBJECT IDENTIFIER::={lightcom 3800}
npGsmInfo OBJECT IDENTIFIER::={npGsm 1}
npGsmFailed OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
failed (1),
fatalError (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware's GSM module status"
::= { npGsmInfo 1 }
npGsmRegistration OBJECT-TYPE
SYNTAX INTEGER {
impossible (0),
homeNetwork (1),
searching (2),
denied (3),
unknown (4),
roaming (5),
infoUpdate (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of modem registration in GSM network (AT+CREG? result)"
::= { npGsmInfo 2 }
npGsmStrength OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GSM signal strength.
0..31 = 0..100%,
99 = unknown or n/a,
255 = updating info"
::= { npGsmInfo 3 }
npGsmTraps OBJECT IDENTIFIER::={npGsm 2}
npGsmTrapPrefix OBJECT IDENTIFIER::={npGsmTraps 0}
npGsmTrap NOTIFICATION-TYPE
OBJECTS {
npGsmFailed,
npGsmRegistration,
npGsmStrength
}
STATUS current
DESCRIPTION
"GSM modem or SMS firmware problems"
::= { npGsmTrapPrefix 1 }
npIr OBJECT IDENTIFIER::={lightcom 7900}
npIrCtrl OBJECT IDENTIFIER::={npIr 1}
npIrPlayCmd OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write IR command number to send IR command"
::= { npIrCtrl 1 }
npIrReset OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to reset IR transiever.
After reset, send IR command and check npIrStatus."
::= { npIrCtrl 2 }
npIrStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
busyCaptureWaitingButton (1),
busyCaptureWaitingIr (2),
busyPlayback (3),
error (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IR transiever status"
::= { npIrCtrl 3 }
npReboot OBJECT IDENTIFIER::={ lightcom 911 }
npSoftReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to reboot device after
current operations completition"
::= { npReboot 1 }
npResetStack OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to re-initialize network
stack"
::= { npReboot 2 }
npForcedReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to immediate forced reboot"
::= { npReboot 3 }
END

841
mibs/netping/DKSF-70-4-X-X-1
View File

@ -1,841 +0,0 @@
DKSF-70-4-X-X-1 DEFINITIONS ::= BEGIN
IMPORTS
enterprises,
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32,
Counter64,
Integer32,
TimeTicks,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
TruthValue,
TimeStamp
FROM SNMPv2-TC
snmpTraps
FROM SNMPv2-MIB ;
uniPingServerSolutionV3 MODULE-IDENTITY
LAST-UPDATED "201505290000Z"
ORGANIZATION "Alentis Electronics"
CONTACT-INFO
"developers@netping.ru"
DESCRIPTION
"Generic MIB for NetPing remote sensing and control"
REVISION "201505290000Z"
DESCRIPTION
"npIoTrapLevelLegend added, npIrStatus values redefined"
REVISION "201412030000Z"
DESCRIPTION
"npRelayMode, npIoLevelOut values changed"
REVISION "201411260000Z"
DESCRIPTION
"npRelayN, npRelayMode, npIoLineN, npRelHumSensorStatusH, npRelHumSensorStatus values changed"
REVISION "201402020000Z"
DESCRIPTION
"npRelayMode valid values changed, (3) excluded "
REVISION "201401290000Z"
DESCRIPTION
"npCurLoop, npRelHumidity, npIr branches has added"
REVISION "201401210000Z"
DESCRIPTION
"partial rewrite for DKSF 70"
REVISION "201304110000Z"
DESCRIPTION
"partial rewrite for DKSF 48"
REVISION "201205310000Z"
DESCRIPTION
"npPwrRelayState branch was added"
REVISION "201204170000Z"
DESCRIPTION
"npReboot branch was added"
REVISION "201203230000Z"
DESCRIPTION
"Minor changes to IR module for IRC-TRv2"
REVISION "201109230000Z"
DESCRIPTION
"4 IO lines,
Identification is changed from DKSF 52.4 to DKSF 52.5"
REVISION "201103240000Z"
DESCRIPTION
"npIoPulseCounter, npIoSinglePulseDuration, npIoSinglePulseStart is added
Identification is changed from DKSF 52.3 to DKSF 52.4"
REVISION "201010140000Z"
DESCRIPTION
"IR module support"
REVISION "201009200000Z"
DESCRIPTION
"dksf 52.3 subversion"
REVISION "201005310000Z"
DESCRIPTION
"dksf 51.3 subversion"
REVISION "201004140000Z"
DESCRIPTION
"SMIv2-style rewrite"
::= { lightcom 70 }
lightcom OBJECT IDENTIFIER::={enterprises 25728 }
npTrapInfo OBJECT IDENTIFIER::={lightcom 90}
npTrapEmailTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "user-specified e-mail for NetPing Trap Forwarding Service"
::={npTrapInfo 1}
npRelay OBJECT IDENTIFIER::={ lightcom 5500 }
npRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpRelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Watchdog and outlet/relay control table"
::= { npRelay 5 }
npRelayEntry OBJECT-TYPE
SYNTAX NpRelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Relay/outlet table row"
INDEX { npRelayN }
::= { npRelayTable 1 }
NpRelayEntry ::= SEQUENCE {
npRelayN INTEGER,
npRelayMode INTEGER,
npRelayStartReset INTEGER,
npRelayMemo DisplayString,
npRelayState INTEGER
-- not in dksf70 npRelayPowered INTEGER
}
npRelayN OBJECT-TYPE
SYNTAX INTEGER (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The N of output relay"
::= { npRelayEntry 1 }
npRelayMode OBJECT-TYPE
SYNTAX INTEGER {
flip(-1),
off(0),
on(1),
watchdog(2),
schedule(3),
scheduleAndWatchdog(4),
logic(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control of relay:
-1 - flip between on(1) and off(0)
0 - manual off
1 - manual on
2 - watchdog
3 - schedule
4 - both schedule and watchdog (while switched on by schedule)
5 - logic"
::={npRelayEntry 2}
npRelayStartReset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to start reset (switch relay off for some time)"
::={npRelayEntry 3}
npRelayMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relay memo"
::={npRelayEntry 6}
npRelayState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on"
::={npRelayEntry 15}
-- npRelayPowered OBJECT-TYPE
-- SYNTAX INTEGER {
-- no(0),
-- yes(1)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "AC presence on output.
-- 0 - no AC dew to relay switched off or no ac on input
-- 1 - AC is present"
-- ::={npRelayEntry 16}
npThermo OBJECT IDENTIFIER::={lightcom 8800}
npThermoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpThermoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Thermo Sensors Table"
::= { npThermo 1 }
npThermoEntry OBJECT-TYPE
SYNTAX NpThermoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Thermo Sensors Table Row"
INDEX { npThermoSensorN }
::= { npThermoTable 1 }
NpThermoEntry ::= SEQUENCE {
npThermoSensorN INTEGER,
npThermoValue INTEGER,
npThermoStatus INTEGER,
npThermoLow INTEGER,
npThermoHigh INTEGER,
npThermoMemo DisplayString
}
npThermoSensorN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The id of temperature sensor, 1 to 8"
::= { npThermoEntry 1 }
npThermoValue OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature, deg.C"
::= { npThermoEntry 2 }
npThermoStatus OBJECT-TYPE
SYNTAX INTEGER {
failed(0),
low(1),
norm(2),
high(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)"
::= { npThermoEntry 3 }
npThermoLow OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bottom margin of normal temperature range, deg.C"
::= { npThermoEntry 4 }
npThermoHigh OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Top margin of normal temperature range, deg.C"
::= { npThermoEntry 5 }
npThermoMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "T channel memo"
::= { npThermoEntry 6 }
npThermoTraps OBJECT IDENTIFIER::={npThermo 2}
npThermoTrapPrefix OBJECT IDENTIFIER::={npThermoTraps 0}
npThermoTrapSensorN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The id of temperature sensor, 1 to 8"
::= { npThermoTraps 1 }
npThermoTrapValue OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature, deg.C"
::= { npThermoTraps 2 }
npThermoTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
failed(0),
low(1),
norm(2),
high(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)"
::= { npThermoTraps 3 }
npThermoTrapLow OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bottom margin of normal temperature range, deg.C"
::= { npThermoTraps 4 }
npThermoTrapHigh OBJECT-TYPE
SYNTAX INTEGER (-60..280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Top margin of normal temperature range, deg.C"
::= { npThermoTraps 5 }
npThermoTrapMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "T channel memo"
::= { npThermoTraps 6 }
npThermoTrap NOTIFICATION-TYPE
OBJECTS {
npThermoTrapSensorN,
npThermoTrapValue,
npThermoTrapStatus,
npThermoTrapLow,
npThermoTrapHigh,
npThermoTrapMemo
}
STATUS current
DESCRIPTION
"Status of Thermo sensor is changed (crossing of normal temp. range)"
::= { npThermoTrapPrefix 1 }
npIo OBJECT IDENTIFIER::={lightcom 8900}
npIoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpIoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Digital Input/output Table"
::= { npIo 1 }
npIoEntry OBJECT-TYPE
SYNTAX NpIoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Digital Input/output Table Row"
INDEX { npIoLineN }
::= { npIoTable 1 }
NpIoEntry ::= SEQUENCE {
npIoLineN INTEGER,
npIoLevelIn INTEGER,
npIoLevelOut INTEGER,
npIoMemo DisplayString,
npIoPulseCounter Counter32,
npIoSinglePulseDuration INTEGER,
npIoSinglePulseStart INTEGER
}
npIoLineN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of IO line, from 1 to max supported"
::= { npIoEntry 1 }
npIoLevelIn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input level, 0 or 1"
::= { npIoEntry 2 }
npIoLevelOut OBJECT-TYPE
SYNTAX INTEGER {
flip(-1),
low(0),
high(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Output level, 0 or 1.
Write -1 to flip output."
::= { npIoEntry 3 }
npIoMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IO line memo"
::= { npIoEntry 6 }
npIoPulseCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset."
::= { npIoEntry 9 }
npIoSinglePulseDuration OBJECT-TYPE
SYNTAX INTEGER (100..25500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms"
::= { npIoEntry 12 }
npIoSinglePulseStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration"
::= { npIoEntry 13 }
npIoTraps OBJECT IDENTIFIER::={npIo 2}
npIoTrapPrefix OBJECT IDENTIFIER::={npIoTraps 0}
npIoTrapLineN OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, Number of IO line"
::= { npIoTraps 1 }
npIoTrapLevelIn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, new Input level, 0 or 1"
::= { npIoTraps 2 }
npIoTrapMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trap data, IO line memo"
::= { npIoTraps 6 }
npIoTrapLevelLegend OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Legend for current logic level on the IO line"
::= { npIoTraps 7 }
npIoTrap NOTIFICATION-TYPE
OBJECTS {
npIoTrapLineN,
npIoTrapLevelIn,
npIoTrapMemo,
npIoTrapLevelLegend
}
STATUS current
DESCRIPTION
"Input state of IO line is changed"
::= { npIoTrapPrefix 1 }
npCurLoop OBJECT IDENTIFIER::={lightcom 8300}
npCurLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpCurLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current loop sensors Table"
::= { npCurLoop 1 }
npCurLoopEntry OBJECT-TYPE
SYNTAX NpCurLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Current loop sensors Table Row"
INDEX { npCurLoopN }
::= { npCurLoopTable 1 }
NpCurLoopEntry ::= SEQUENCE {
npCurLoopN INTEGER,
npCurLoopStatus INTEGER,
npCurLoopI INTEGER,
npCurLoopV INTEGER,
npCurLoopR INTEGER,
npCurLoopPower INTEGER
}
npCurLoopN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of current loop, 1 to max supported"
::= { npCurLoopEntry 1 }
npCurLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
alert(1),
cut(2),
short(3),
notPowered(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the loop
0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered"
::= { npCurLoopEntry 2 }
npCurLoopI OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loop current, mA"
::= { npCurLoopEntry 3 }
npCurLoopV OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voltage drop on the loop, mV"
::= { npCurLoopEntry 4 }
npCurLoopR OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resistance of the loop, Ohm"
::= { npCurLoopEntry 5 }
npCurLoopPower OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
cyclePower(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control of loop power
0=Off, 1=On, 2=reset by off/on power"
::= { npCurLoopEntry 7 }
npCurLoopTraps OBJECT IDENTIFIER::={npCurLoop 2}
npCurLoopTrapPrefix OBJECT IDENTIFIER::={npCurLoopTraps 0}
npCurLoopTrapN OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of current loop, which status has changed"
::= { npCurLoopTraps 1 }
npCurLoopTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
alert(1),
cut(2),
short(3),
notPowered(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the loop
0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered"
::= { npCurLoopTraps 2 }
npCurLoopTrapI OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loop current, mA"
::= { npCurLoopTraps 3 }
npCurLoopTrapV OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voltage drop on the loop, mV"
::= { npCurLoopTraps 4 }
npCurLoopTrapR OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resistance of the loop, Ohm"
::= { npCurLoopTraps 5 }
npCurLoopTrapPower OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of loop power
0=Off, 1=On"
::= { npCurLoopTraps 7 }
npCurLoopTrap NOTIFICATION-TYPE
OBJECTS {
npCurLoopTrapN,
npCurLoopTrapStatus,
npCurLoopTrapI,
npCurLoopTrapV,
npCurLoopTrapR,
npCurLoopTrapPower,
npTrapEmailTo
}
STATUS current
DESCRIPTION
"Status of current loop N has changed!"
::= { npCurLoopTrapPrefix 1 }
npRelHumidity OBJECT IDENTIFIER::={lightcom 8400}
npRelHumSensor OBJECT IDENTIFIER::={npRelHumidity 2}
npRelHumSensorStatus OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the Rel.Humidity Sensor One
1=Normal, 0=Error or Sensor isn't connected"
::= { npRelHumSensor 3 }
npRelHumSensorValueH OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relative humidity value, %"
::= { npRelHumSensor 2 }
npRelHumSensorValueT OBJECT-TYPE
SYNTAX INTEGER (-60..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sensor temperature, deg.C"
::= { npRelHumSensor 4 }
npRelHumSensorStatusH OBJECT-TYPE
SYNTAX INTEGER {
sensorFailed(0),
belowSafeRange(1),
inSafeRange(2),
aboveSafeRange(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of Relative Humiduty"
::= { npRelHumSensor 5 }
npRelHumSafeRangeHigh OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relative Humidity safe range, top margin, %RH"
::= { npRelHumSensor 7 }
npRelHumSafeRangeLow OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relative Humidity safe range, bottom margin, %RH"
::= { npRelHumSensor 8 }
npRelHumSensorValueT100 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sensor temperature, deg.C * 100 (fixed point two decimal places)
Used to get access to the fractional part of T value"
::= { npRelHumSensor 9 }
npRelHumTraps OBJECT IDENTIFIER::={npRelHumidity 9}
npRelHumTrapPrefix OBJECT IDENTIFIER::={npRelHumTraps 0}
npRelHumTrap NOTIFICATION-TYPE
OBJECTS {
npRelHumSensorStatusH,
npRelHumSensorValueH,
npRelHumSafeRangeHigh,
npRelHumSafeRangeLow,
npTrapEmailTo
}
STATUS current
DESCRIPTION
"Status of Relative Humidity RH sensor has changed!"
::= { npRelHumTrapPrefix 1 }
npGsm OBJECT IDENTIFIER::={lightcom 3800}
npGsmInfo OBJECT IDENTIFIER::={npGsm 1}
npGsmFailed OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
failed (1),
fatalError (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware's GSM module status"
::= { npGsmInfo 1 }
npGsmRegistration OBJECT-TYPE
SYNTAX INTEGER {
impossible (0),
homeNetwork (1),
searching (2),
denied (3),
unknown (4),
roaming (5),
infoUpdate (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of modem registration in GSM network (AT+CREG? result)"
::= { npGsmInfo 2 }
npGsmStrength OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GSM signal strength.
0..31 = 0..100%,
99 = unknown or n/a,
255 = updating info"
::= { npGsmInfo 3 }
npGsmSendSms OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Send arbitrary SMS.
Format: [phone_number,phone_number,...] Message
One to four destination phone numbers
If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup
Only Latin characters allowed in message body"
::= { npGsmInfo 9 }
npGsmTraps OBJECT IDENTIFIER::={npGsm 2}
npGsmTrapPrefix OBJECT IDENTIFIER::={npGsmTraps 0}
npGsmTrap NOTIFICATION-TYPE
OBJECTS {
npGsmFailed,
npGsmRegistration,
npGsmStrength
}
STATUS current
DESCRIPTION
"GSM modem or SMS firmware problems"
::= { npGsmTrapPrefix 1 }
npIr OBJECT IDENTIFIER::={lightcom 7900}
npIrCtrl OBJECT IDENTIFIER::={npIr 1}
npIrPlayCmd OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write IR command number to send IR command"
::= { npIrCtrl 1 }
npIrReset OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to reset IR transiever.
After reset, send IR command and check npIrStatus."
::= { npIrCtrl 2 }
npIrStatus OBJECT-TYPE
SYNTAX INTEGER {
commandCompleted (0),
protocolError (1),
commandAccepted (2),
errorUnknown (16),
errorBadNumber (17),
errorEmptyRecord (18),
errorFlashChip (19),
errorTimeout (20),
errorExtBusBusy (21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IR transiever status"
::= { npIrCtrl 3 }
npReboot OBJECT IDENTIFIER::={ lightcom 911 }
npSoftReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to reboot device after
current operations completition"
::= { npReboot 1 }
npResetStack OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to re-initialize network
stack"
::= { npReboot 2 }
npForcedReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to immediate forced reboot"
::= { npReboot 3 }
END

1177
mibs/netping/DKSF-70-5-X-X-1
View File

File diff suppressed because it is too large Load Diff

1206
mibs/netping/DKSF-70-6-X-X-1
View File

File diff suppressed because it is too large Load Diff

2052
mibs/netping/DKSF-70-MIB Normal file
View File

File diff suppressed because it is too large Load Diff

133
mibs/netping/DKSF-707-1-X-X-1
View File

@ -1,133 +0,0 @@
DKSF-707-1-X-X-1 DEFINITIONS ::= BEGIN
IMPORTS
enterprises,
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32,
Counter64,
Integer32,
TimeTicks,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
TruthValue,
TimeStamp
FROM SNMPv2-TC
snmpTraps
FROM SNMPv2-MIB ;
uniPingServerSolutionV3 MODULE-IDENTITY
LAST-UPDATED "201403030000Z"
ORGANIZATION "Alentis Electronics"
CONTACT-INFO
"developers@netping.ru"
DESCRIPTION
"MIB for NetPing SMS gsm bridge"
REVISION "201403030000Z"
DESCRIPTION
"initial release"
::= { lightcom 707 }
lightcom OBJECT IDENTIFIER::={enterprises 25728 }
npTrapInfo OBJECT IDENTIFIER::={lightcom 90}
npTrapEmailTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "user-specified e-mail for NetPing Trap Forwarding Service"
::={npTrapInfo 1}
npGsm OBJECT IDENTIFIER::={lightcom 3800}
npGsmInfo OBJECT IDENTIFIER::={npGsm 1}
npGsmFailed OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
failed (1),
fatalError (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware's GSM module status"
::= { npGsmInfo 1 }
npGsmRegistration OBJECT-TYPE
SYNTAX INTEGER {
impossible (0),
homeNetwork (1),
searching (2),
denied (3),
unknown (4),
roaming (5),
infoUpdate (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of modem registration in GSM network (AT+CREG? result)"
::= { npGsmInfo 2 }
npGsmStrength OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GSM signal strength.
0..31 = 0..100%,
99 = unknown or n/a,
255 = updating info"
::= { npGsmInfo 3 }
npGsmTraps OBJECT IDENTIFIER::={npGsm 2}
npGsmTrapPrefix OBJECT IDENTIFIER::={npGsmTraps 0}
npGsmTrap NOTIFICATION-TYPE
OBJECTS {
npGsmFailed,
npGsmRegistration,
npGsmStrength
}
STATUS current
DESCRIPTION
"GSM modem or SMS firmware problems"
::= { npGsmTrapPrefix 1 }
npReboot OBJECT IDENTIFIER::={ lightcom 911 }
npSoftReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to reboot device after
current operations completition"
::= { npReboot 1 }
npResetStack OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to re-initialize network
stack"
::= { npReboot 2 }
npForcedReboot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write 1 to immediate forced reboot"
::= { npReboot 3 }
END