initial commit; version 22.5.12042
This commit is contained in:
553
mibs/zyxel/ZYXEL-POWER-ETHERNET-MIB
Normal file
553
mibs/zyxel/ZYXEL-POWER-ETHERNET-MIB
Normal file
@ -0,0 +1,553 @@
|
||||
-- ZyXEL Communications Corporation
|
||||
-- Private Enterprise MIB definition
|
||||
|
||||
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
|
||||
-- It contains ZyXEL products OIDs, and common managed objects.
|
||||
|
||||
-- ZYXEL-POWER-ETHERNET-MIB.mib
|
||||
-- Revision 1.9 2013/12/10
|
||||
-- remove uncessary imports
|
||||
-- Revision 1.8 2013/11/06 07:36:04 ccho
|
||||
-- fix mib style
|
||||
-- Revision 1.7 2013/06/25 10:00:40 Mandy
|
||||
-- Support notified trap for error recovered
|
||||
-- Revision 1.6 2012/11/16 08:03:56 cfchen
|
||||
-- user-defined max power
|
||||
-- Revision 1.5 2012/10/25 03:50:41 Kevin
|
||||
-- correct entry name
|
||||
-- Revision 1.4 2012/09/19 07:44:41 Kevin
|
||||
-- if it's leaf node, revise the vender name from zyxel to zy
|
||||
-- Revision 1.3 2012/08/22 09:47:47 Kevin
|
||||
-- clean warning for SNMPc
|
||||
-- Revision 1.2 2012/07/05 06:24:22 Kevin
|
||||
-- 1. upgrade from SNMP to SNMPv2
|
||||
-- 2. clean warning
|
||||
-- Revision 1.1 2012/05/30 07:50:26 Kevin
|
||||
-- Initial revision
|
||||
|
||||
ZYXEL-POWER-ETHERNET-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
OBJECT-TYPE
|
||||
FROM SNMPv2-SMI -- RFC2578
|
||||
|
||||
MODULE-IDENTITY
|
||||
FROM SNMPv2-SMI
|
||||
|
||||
EnabledStatus
|
||||
FROM P-BRIDGE-MIB
|
||||
|
||||
dot1dBasePort
|
||||
FROM BRIDGE-MIB
|
||||
|
||||
ifIndex
|
||||
FROM IF-MIB -- RFC2863
|
||||
|
||||
NOTIFICATION-TYPE
|
||||
FROM SNMPv2-SMI
|
||||
|
||||
DisplayString
|
||||
FROM SNMPv2-TC
|
||||
|
||||
InetAddressType, InetAddress
|
||||
FROM INET-ADDRESS-MIB -- RFC2851
|
||||
|
||||
RowStatus
|
||||
FROM SNMPv2-TC -- RFC2579
|
||||
|
||||
esMgmt
|
||||
FROM ZYXEL-ES-SMI;
|
||||
|
||||
|
||||
zyxelPoe MODULE-IDENTITY
|
||||
LAST-UPDATED "201207010000Z"
|
||||
ORGANIZATION "Enterprise Solution ZyXEL"
|
||||
CONTACT-INFO
|
||||
""
|
||||
DESCRIPTION
|
||||
"The subtree for Power over Ethernet (PoE)"
|
||||
::= { esMgmt 59 }
|
||||
|
||||
zyxelPoeSetup OBJECT IDENTIFIER ::= { zyxelPoe 1 }
|
||||
zyxelPoeStatus OBJECT IDENTIFIER ::= { zyxelPoe 2 }
|
||||
zyxelPoeTrapInfoObject OBJECT IDENTIFIER ::= { zyxelPoe 3 }
|
||||
zyxelPoeNotifications OBJECT IDENTIFIER ::= { zyxelPoe 4 }
|
||||
zyxelPoeAutoPdRecoverySetup OBJECT IDENTIFIER ::= { zyxelPoe 5 }
|
||||
|
||||
|
||||
-- *******************************************************************
|
||||
-- *
|
||||
-- * zyxelPoeSetup
|
||||
-- *
|
||||
-- *******************************************************************
|
||||
|
||||
-- zyxelPoeMode
|
||||
zyPoeMode OBJECT-TYPE
|
||||
SYNTAX INTEGER{
|
||||
consumption(0),
|
||||
classification(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set POE Mode Setup Consumption mode (0), Classification mode (1)."
|
||||
::= { zyxelPoeSetup 1 }
|
||||
|
||||
-- zyxelPoePsePortTable
|
||||
zyxelPoePsePortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZyxelPoePsePortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table contains power ethernet port information. "
|
||||
::= { zyxelPoeSetup 2 }
|
||||
|
||||
zyxelPoePsePortEntry OBJECT-TYPE
|
||||
SYNTAX ZyxelPoePsePortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry contains power ethernet port information. "
|
||||
INDEX { dot1dBasePort }
|
||||
::= { zyxelPoePsePortTable 1 }
|
||||
|
||||
ZyxelPoePsePortEntry ::=
|
||||
SEQUENCE {
|
||||
zyPoePsePortMaxPower INTEGER,
|
||||
zyPoePsePowerUp INTEGER,
|
||||
zyPoePsePortTimeRange DisplayString,
|
||||
zyPoePseWideRangeDetection EnabledStatus
|
||||
}
|
||||
|
||||
zyPoePsePortMaxPower OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PoE PSE port user-defined max power expressed in milliwatt,
|
||||
Valid value should be between 1000 and 33000,in steps of 200.
|
||||
Value 0(Default) means to disable user-defined max power."
|
||||
|
||||
::= { zyxelPoePsePortEntry 1 }
|
||||
|
||||
zyPoePsePowerUp OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
ieee802dot3af(0),
|
||||
legacy(1),
|
||||
preIeee802dot3at(2),
|
||||
ieee802dot3at(3),
|
||||
ieee802dot3bt(4),
|
||||
preIeee802dot3bt(5),
|
||||
forceIeee802dot3at(6)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set PoE Power Up Mode Setup 802.3af mode (0), Legacy mode (1), Pre-802.3at mode(2), 802.3at mode(3), 802.3bt mode(4), Pre-802.3bt mode(5), Force-802.3at mode(6)"
|
||||
|
||||
|
||||
::= { zyxelPoePsePortEntry 2 }
|
||||
|
||||
zyPoePsePortTimeRange OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Time-Based PoE allow to schedule the PoE works time.
|
||||
Type in the time-range name witch is already created."
|
||||
|
||||
::= { zyxelPoePsePortEntry 3 }
|
||||
|
||||
zyPoePseWideRangeDetection OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set PoE Wide range detection Enable/Disable."
|
||||
|
||||
|
||||
::= { zyxelPoePsePortEntry 4 }
|
||||
|
||||
-- zyxelPoePreAllocate
|
||||
zyPoePreAllocate OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set Poe pre-allocate Enable/Disable."
|
||||
::= { zyxelPoeSetup 3 }
|
||||
|
||||
-- zyxelPoeDualDetection
|
||||
zyPoeDualDetection OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set Poe dual detection Enable/Disable."
|
||||
::= { zyxelPoeSetup 4 }
|
||||
|
||||
-- zyxelPoePowerSequenceDelay
|
||||
zyPoePowerSequenceDelay OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set Poe Power Sequence Mode Delay Setup Enable/Disable."
|
||||
::= { zyxelPoeSetup 5 }
|
||||
|
||||
-- *******************************************************************
|
||||
-- *
|
||||
-- * zyxelPoeStatus
|
||||
-- *
|
||||
-- *******************************************************************
|
||||
|
||||
|
||||
-- zyxelPoePsePortTimeRangeTable
|
||||
zyxelPoePsePortTimeRangeTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZyxelPoePsePortTimeRangeEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table contains power ethernet port time-range settings. "
|
||||
::= { zyxelPoeSetup 6 }
|
||||
|
||||
zyxelPoePsePortTimeRangeEntry OBJECT-TYPE
|
||||
SYNTAX ZyxelPoePsePortTimeRangeEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry contains power ethernet port time-range settings. "
|
||||
INDEX { dot1dBasePort, zyPoePsePortTimeRangeName }
|
||||
::= { zyxelPoePsePortTimeRangeTable 1 }
|
||||
|
||||
ZyxelPoePsePortTimeRangeEntry ::=
|
||||
SEQUENCE {
|
||||
zyPoePsePortTimeRangeName DisplayString,
|
||||
zyPoePsePortTimeRangeRowStatus RowStatus
|
||||
}
|
||||
|
||||
zyPoePsePortTimeRangeName OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Time-Based PoE allow to schedule the PoE works time. Specifiy the time-range which is already created."
|
||||
::= { zyxelPoePsePortTimeRangeEntry 1 }
|
||||
|
||||
zyPoePsePortTimeRangeRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object allow entry to be create and deleted a poe port time-range entry."
|
||||
::= { zyxelPoePsePortTimeRangeEntry 2 }
|
||||
|
||||
-- zyPoeContinuousPoE
|
||||
zyPoeContinuousPoE OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set Continuous PoE Enable/Disable."
|
||||
::= { zyxelPoeSetup 7 }
|
||||
|
||||
|
||||
-- zyxelPoePsePortInfoTable
|
||||
zyxelPoePsePortInfoTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZyxelPoePsePortInfoEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table contains power ethernet port information. "
|
||||
::= { zyxelPoeStatus 1 }
|
||||
|
||||
zyxelPoePsePortInfoEntry OBJECT-TYPE
|
||||
SYNTAX ZyxelPoePsePortInfoEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry contains power ethernet port information. "
|
||||
INDEX { dot1dBasePort }
|
||||
::= { zyxelPoePsePortInfoTable 1 }
|
||||
|
||||
ZyxelPoePsePortInfoEntry ::=
|
||||
SEQUENCE {
|
||||
zyPoePsePortInfoPowerConsumption INTEGER,
|
||||
zyPoePsePortTimeRangeState INTEGER,
|
||||
zyPoePsePortTimeRangeInProfile DisplayString
|
||||
}
|
||||
|
||||
zyPoePsePortInfoPowerConsumption OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PoE PSE port power consumption expressed in milliwatt."
|
||||
::= { zyxelPoePsePortInfoEntry 1 }
|
||||
|
||||
zyPoePsePortTimeRangeState OBJECT-TYPE
|
||||
SYNTAX INTEGER{
|
||||
none(0),
|
||||
in(1),
|
||||
out(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"None(0): not bind with any time range.
|
||||
In(1): system time is in the time range.
|
||||
Out(2): system time is out of the time range."
|
||||
::= { zyxelPoePsePortInfoEntry 2 }
|
||||
|
||||
|
||||
-- *******************************************************************
|
||||
-- *
|
||||
-- * zyxelPoeTrapInfoObject
|
||||
-- *
|
||||
-- *******************************************************************
|
||||
|
||||
|
||||
zyPoePsePortTimeRangeInProfile OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"time-range profile name which is in profile"
|
||||
::= { zyxelPoePsePortInfoEntry 3 }
|
||||
|
||||
|
||||
zyPoeTrapPsePowerSupplyFailedReason OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
internalPowerSupplyForPoeFailed(0),
|
||||
rpsForPoeFailed(1),
|
||||
rpsFanFailed(2),
|
||||
rpsOverTemperature(3)
|
||||
}
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Internal-power-supply-for-PoE-failed(0): Internal power supply for PoE has failed.
|
||||
RPS-for-PoE-failed(1): External power supply for PoE (RPS) has failed.
|
||||
RPS-fan-failed(2): RPS fan has failed.
|
||||
RPS-over-temperature(3): RPS temperature is out of the normal operation range."
|
||||
::= { zyxelPoeTrapInfoObject 1 }
|
||||
|
||||
-- *******************************************************************
|
||||
-- *
|
||||
-- * zyxelPoeNotifications
|
||||
-- *
|
||||
-- *******************************************************************
|
||||
zyPoePowerPortOverload NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port is off, due to the overload state according to 802.3af."
|
||||
::= { zyxelPoeNotifications 1 }
|
||||
|
||||
zyPoePowerPortShortCircuit NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port is off, due to short circuit."
|
||||
::= { zyxelPoeNotifications 2 }
|
||||
|
||||
zyPoePowerPortOverSystemBudget NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port is off, due to over system budget."
|
||||
::= { zyxelPoeNotifications 3 }
|
||||
|
||||
zyPoePsePowerSupplyFailed NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
zyPoeTrapPsePowerSupplyFailedReason
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PSE power supply failed, due to the reason of zyxelPoeTrapPsePowerSupplyFailedReason."
|
||||
::= { zyxelPoeNotifications 4 }
|
||||
|
||||
zyPoePowerPortOverloadRecovered NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port is on, since recovered from overload state."
|
||||
::= { zyxelPoeNotifications 5 }
|
||||
|
||||
zyPoePowerPortShortCircuitRecovered NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port is on, since recovered from short circuit."
|
||||
::= { zyxelPoeNotifications 6 }
|
||||
|
||||
zyPoePowerPortOverSystemBudgetRecovered NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port is on, since recovered from over system budget."
|
||||
::= { zyxelPoeNotifications 7 }
|
||||
|
||||
zyPoeAutoPdRecoveryAlarm NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex,
|
||||
zyPoeAutoPdRecoveryPortMode
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PoE device works fail."
|
||||
::= { zyxelPoeNotifications 8 }
|
||||
|
||||
zyPoePowerPortOverStandard NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
ifIndex
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port uses more power than standard defined value."
|
||||
::= { zyxelPoeNotifications 9 }
|
||||
|
||||
-- *******************************************************************
|
||||
-- *
|
||||
-- * zyxelPoeAutoPdRecoverySetup
|
||||
-- *
|
||||
-- *******************************************************************
|
||||
|
||||
-- zyPoeAutoPdRecoveryState
|
||||
zyPoeAutoPdRecoveryState OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Enable or disable Auto PD Recovery on switch."
|
||||
::= { zyxelPoeAutoPdRecoverySetup 1 }
|
||||
|
||||
-- zyxelPoeAutoPdRecoveryPortTable
|
||||
zyxelPoeAutoPdRecoveryPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZyxelPoeAutoPdRecoveryPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table contains Auto PD Recovery port configuration."
|
||||
::= { zyxelPoeAutoPdRecoverySetup 2 }
|
||||
|
||||
zyxelPoeAutoPdRecoveryPortEntry OBJECT-TYPE
|
||||
SYNTAX ZyxelPoeAutoPdRecoveryPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The entry contains Auto PD Recovery port configuration."
|
||||
INDEX { dot1dBasePort }
|
||||
::= { zyxelPoeAutoPdRecoveryPortTable 1 }
|
||||
|
||||
ZyxelPoeAutoPdRecoveryPortEntry ::=
|
||||
SEQUENCE {
|
||||
zyPoeAutoPdRecoveryPortState EnabledStatus,
|
||||
zyPoeAutoPdRecoveryPortMode INTEGER,
|
||||
zyPoeAutoPdRecoveryPortIpAddressType InetAddressType,
|
||||
zyPoeAutoPdRecoveryPortIpAddress InetAddress,
|
||||
zyPoeAutoPdRecoveryPollingInterval INTEGER,
|
||||
zyPoeAutoPdRecoveryPortPollingCount INTEGER,
|
||||
zyPoeAutoPdRecoveryPortAction INTEGER,
|
||||
zyPoeAutoPdRecoveryPortResumePollingInterval INTEGER,
|
||||
zyPoeAutoPdRecoveryPortPdRebootCount INTEGER,
|
||||
zyPoeAutoPdRecoveryPortResumePowerInterval INTEGER
|
||||
}
|
||||
zyPoeAutoPdRecoveryPortState OBJECT-TYPE
|
||||
SYNTAX EnabledStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Enable or disable Auto PD Recovery on specific port."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 1 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortMode OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
lldp(1),
|
||||
ping(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Auto PD Recovery mode. Default value is LLDP(1)."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 2 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortIpAddressType OBJECT-TYPE
|
||||
SYNTAX InetAddressType
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The address type of zyPoeAutoPdRecoveryPortIpAddress."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 3 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortIpAddress OBJECT-TYPE
|
||||
SYNTAX InetAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PD IP address."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 4 }
|
||||
|
||||
zyPoeAutoPdRecoveryPollingInterval OBJECT-TYPE
|
||||
SYNTAX INTEGER (10..300)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Time interval between each ping request to PD. Default value is 20 (seconds)."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 5 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortPollingCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (2..5)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Number of retry times when detect fail. Default value is 3 (times)."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 6 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortAction OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
reboot-alarm(1),
|
||||
alarm(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Action will be applied if PD without any response. Default value is reboot-alarm(1)"
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 7 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortResumePollingInterval OBJECT-TYPE
|
||||
SYNTAX INTEGER (60..800)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PD reboot waiting time. Default value is 600 (seconds)."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 8 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortPdRebootCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..5)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PD reboot count. Default value is 1 (time)."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 9 }
|
||||
|
||||
zyPoeAutoPdRecoveryPortResumePowerInterval OBJECT-TYPE
|
||||
SYNTAX INTEGER (5..120)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Set delay time to resume the PoE power supply. Default value is 10 (seconds)."
|
||||
::= { zyxelPoeAutoPdRecoveryPortEntry 10 }
|
||||
END
|
||||
Reference in New Issue
Block a user