initial commit; version 22.5.12042

2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
--- a/mibs/zyxel/ZYXEL-IPV6-SNOOPING-MIB
+++ b/mibs/zyxel/ZYXEL-IPV6-SNOOPING-MIB
@ -0,0 +1,166 @@
+-- ZyXEL Communications Corporation
+-- Private Enterprise MIB definition 
+  
+-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
+-- It contains ZyXEL products OIDs, and common managed objects.
+
+-- $Log: ZYXEL-IPV6-SNOOPING-MIB.mib $ 
+-- Revision 1.1  2015/01/28 08:34:26  Kevin 
+-- Initial revision 
+
+ZYXEL-IPV6-SNOOPING-MIB DEFINITIONS ::= BEGIN
+
+
+    IMPORTS
+	OBJECT-TYPE
+		FROM SNMPv2-SMI			-- RFC2578	
+		
+	MODULE-IDENTITY
+		FROM SNMPv2-SMI
+	
+	RowStatus
+		FROM SNMPv2-TC			-- RFC2579
+		
+	DisplayString                                          
+	  	FROM SNMPv2-TC
+	  	
+	EnabledStatus
+		FROM  P-BRIDGE-MIB
+	
+	esMgmt			
+		FROM ZYXEL-ES-SMI;
+
+	zyxelIpv6Snooping MODULE-IDENTITY
+		LAST-UPDATED	"201412310000Z"    
+		ORGANIZATION "Enterprise Solution ZyXEL"     
+		CONTACT-INFO
+			""	   
+		DESCRIPTION
+			"The subtree for IPv6 snooping"
+		::= { esMgmt 109 }
+
+	zyxelIpv6SnoopingSetup 	OBJECT IDENTIFIER ::= { zyxelIpv6Snooping 1 }		
+
+
+	zyIpv6SnoopingPolicyMaxNumberOfPolicies OBJECT-TYPE
+        SYNTAX  	INTEGER
+        MAX-ACCESS  read-only
+        STATUS  	current
+        DESCRIPTION
+		"The maximum number of IPv6 snooping policy entries that can be created."
+		::= { zyxelIpv6SnoopingSetup 1 } 
+		
+	zyxelIpv6SnoopingPolicyTable OBJECT-TYPE
+        SYNTAX	SEQUENCE OF ZyxelIpv6SnoopingPolicyEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The table maintains IPv6 snooping policy configuration."
+        ::= { zyxelIpv6SnoopingSetup 2 }
+        
+	zyxelIpv6SnoopingPolicyEntry OBJECT-TYPE
+        SYNTAX	ZyxelIpv6SnoopingPolicyEntry
+        MAX-ACCESS	not-accessible
+        STATUS	current
+        DESCRIPTION    	
+		"An entry contains IPv6 snooping policy configuration."
+        INDEX          	{ zyIpv6SnoopingPolicyName }
+        ::= { zyxelIpv6SnoopingPolicyTable 1 }              
+
+      	ZyxelIpv6SnoopingPolicyEntry ::=
+		SEQUENCE {
+        	zyIpv6SnoopingPolicyName						DisplayString,
+        	zyIpv6SnoopingPolicyProtocol					BITS,
+        	zyIpv6SnoopingPolicyPrefixGleanState			EnabledStatus,
+        	zyIpv6SnoopingPolicyLimitAddressCount			INTEGER,
+          	zyIpv6SnoopingPolicyRowStatus 					RowStatus
+           }
+
+        zyIpv6SnoopingPolicyName OBJECT-TYPE
+        SYNTAX  DisplayString
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The name of IPv6 snooping policy."
+        ::= { zyxelIpv6SnoopingPolicyEntry 1 }
+
+        zyIpv6SnoopingPolicyProtocol OBJECT-TYPE
+        SYNTAX  BITS {
+        	dhcp(0)
+        }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "Select the protocol is snooped in the policy."
+        ::= { zyxelIpv6SnoopingPolicyEntry 2 }                        
+
+        zyIpv6SnoopingPolicyPrefixGleanState OBJECT-TYPE
+        SYNTAX  EnabledStatus
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "Enable/Disable the option to glean IPv6 prefix in DHCP-PD packet"
+        ::= { zyxelIpv6SnoopingPolicyEntry 3 }                        
+
+        zyIpv6SnoopingPolicyLimitAddressCount OBJECT-TYPE
+        SYNTAX  INTEGER
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "Set this field to limit the number of snooped addresses. 
+        For example, if you set this field to 5, then only the devices 
+        with these five learned addresses may snooped on the policy at any one time. 
+        A sixth device would have to wait until one of the five learned addresses aged out. 
+        0 means no limit."
+        ::= { zyxelIpv6SnoopingPolicyEntry 4 }                        
+
+        zyIpv6SnoopingPolicyRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "This object allows an IPv6 snooping policy entry to be created and deleted."
+        ::= { zyxelIpv6SnoopingPolicyEntry 100 }
+		
+
+		zyxelIpv6SnoopingPolicyIfTable OBJECT-TYPE
+        SYNTAX	SEQUENCE OF ZyxelIpv6SnoopingPolicyIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The table maintains IPv6 snooping policy interface VLAN configuration"
+        ::= { zyxelIpv6SnoopingSetup 3 }
+                               
+		zyxelIpv6SnoopingPolicyIfEntry OBJECT-TYPE
+        SYNTAX	ZyxelIpv6SnoopingPolicyIfEntry
+        MAX-ACCESS	not-accessible
+        STATUS	current
+        DESCRIPTION    	
+		"An entry contains IPv6 snooping policy interface VLAN configuration."
+        INDEX          	{ zyIpv6SnoopingPolicyIfIndex }
+        ::= { zyxelIpv6SnoopingPolicyIfTable 1 }              
+
+      	ZyxelIpv6SnoopingPolicyIfEntry ::=
+		SEQUENCE {
+         	zyIpv6SnoopingPolicyIfIndex				INTEGER,
+			zyIpv6SnoopingPolicyIfAttachPolicy		DisplayString
+           }
+
+        zyIpv6SnoopingPolicyIfIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The interface VLAN of IPv6. It is created by zyxelIf module."
+        ::= { zyxelIpv6SnoopingPolicyIfEntry 1 }
+
+        zyIpv6SnoopingPolicyIfAttachPolicy OBJECT-TYPE
+        SYNTAX  DisplayString
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "Select the policy attach to the interface VLAN."
+        ::= { zyxelIpv6SnoopingPolicyIfEntry 2 }                        
+                          
+END
+