WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

623
mibs/supermicro/SUPERMICRO-IPMROUTE-MIB Normal file
View File

@ -0,0 +1,623 @@
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
-- $Id: fsmfwd.mib,v 1.5 2012/09/07 09:52:05 siva Exp $
-- Management Information Base for MFWD Module
SUPERMICRO-IPMROUTE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Integer32, Counter32, Counter64, Gauge32,
IpAddress, TimeTicks, enterprises
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, TruthValue,
DisplayString FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InterfaceIndexOrZero,
InterfaceIndex FROM IF-MIB
IANAipMRouteProtocol FROM IANA-RTPROTO-MIB;
ipMRouteMIB MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "Super Micro Computer Inc."
CONTACT-INFO "support@Supermicro.com"
DESCRIPTION
"The MIB module for management of IP Multicast forwardingi, but
independent of the specific multicast routing protocol in
use."
REVISION "201209050000Z" -- November 30, 2001"
DESCRIPTION
"Initial version, published as RFC 2932."
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 71 }
-- Textual Conventions
-- This Textual convention enhance the readability of the secification.
Status ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the ipMRouteGlobalDebug"
SYNTAX INTEGER {
enable(1),
disable(2)
}
-- The ID 20 for futurepim is temp not allocated one
-- future OBJECT IDENTIFIER ::= { enterprises 2076}
-- mfwd OBJECT IDENTIFIER ::= { future 20 }
-- mfwdMIB OBJECT IDENTIFIER ::= { mfwd 1 }
mfwdMIBObjects OBJECT IDENTIFIER ::= { ipMRouteMIB 1 }
mfwdScalars OBJECT IDENTIFIER ::= { mfwdMIBObjects 1 }
mfwdTables OBJECT IDENTIFIER ::= { mfwdMIBObjects 2 }
mfwdTraps OBJECT IDENTIFIER ::= { mfwdMIBObjects 3 }
-- the IP Multicast Routing MIB-Group
--
-- a collection of objects providing information about
-- IP Multicast Groups
ipMRouteEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled status of IP Multicast routing on this router."
::= { mfwdScalars 1 }
ipMRouteEntryCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rows in the ipMRouteTable. This can be used
to monitor the multicast routing table size."
::= { mfwdScalars 2 }
ipMRouteEnableCmdb OBJECT-TYPE
SYNTAX INTEGER { enable(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transit data storage is used to store the data packets which
have suffered a cache-miss and waiting for MRP to create a route
entry. This feature is optional in MFWD. This can be enabled or
disabled using this mib object."
::= { mfwdScalars 3 }
mfwdGlobalTrace OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in MFWD Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path,
3 - Control Plane, 4 - packet Dump, 5 - All resources except
buffer, 6 - All Failures, 7 - Buffer. The remaining
bits are unused. The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Trace
statements related to management and Data Path will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { mfwdScalars 4 }
mfwdGlobalDebug OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Debug statements in PIM.
A Four byte integer value is specified for enabling the
level of debugging. Each bit in the four byte integer
variable represents a level of debugging. The combination of
levels are also allowed. The user have to enter the
corresponding integer value for the bit set."
DEFVAL { 0 }
::= { mfwdScalars 5 }
ipMRouteDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This data contains the value of the number of packets that have
been discarded since they have arrived on an unknown interface "
::= { mfwdScalars 6 }
mfwdAvgDataRate OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Used to tune the processing of Mesages from MRP and IP"
DEFVAL { 1000 }
::= { mfwdScalars 7 }
ipMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information for IP datagrams sent by particular sources to
the IP multicast groups known to this router."
::= { mfwdTables 1 }
ipMRouteEntry OBJECT-TYPE
SYNTAX IpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.
Discontinuities in counters in this entry can be detected by
observing the value of ipMRouteUpTime."
INDEX { ipMRouteOwnerId,
ipMRouteGroup,
ipMRouteSource,
ipMRouteSourceMask }
::= { ipMRouteTable 1 }
IpMRouteEntry ::= SEQUENCE {
ipMRouteOwnerId INTEGER,
ipMRouteGroup IpAddress,
ipMRouteSource IpAddress,
ipMRouteSourceMask IpAddress,
ipMRouteUpstreamNeighbor IpAddress,
ipMRouteInIfIndex InterfaceIndexOrZero,
ipMRouteUpTime TimeTicks,
ipMRoutePkts Counter32,
ipMRouteDifferentInIfPackets Counter32,
ipMRouteProtocol IANAipMRouteProtocol,
ipMRouteRtAddress IpAddress,
ipMRouteRtMask IpAddress,
ipMRouteRtType INTEGER
}
ipMRouteOwnerId OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This Value represents the owner id of the MRP which owns
the route entry."
::= { ipMRouteEntry 1 }
ipMRouteGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains multicast routing information."
::= { ipMRouteEntry 2 }
ipMRouteSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { ipMRouteEntry 3 }
ipMRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { ipMRouteEntry 4 }
ipMRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources to this multicast
address are received, or 0.0.0.0 if the upstream neighbor is
unknown (e.g., in CBT)."
::= { ipMRouteEntry 5 }
ipMRouteInIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface on which IP
datagrams sent by these sources to this multicast address
are received. A value of 0 indicates that datagrams are not
subject to an incoming interface check, but may be accepted
on multiple interfaces (e.g., in CBT)."
::= { ipMRouteEntry 6 }
ipMRouteUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { ipMRouteEntry 7 }
ipMRoutePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group
address."
::= { ipMRouteEntry 8 }
ipMRouteDifferentInIfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group address,
which were dropped because they were not received on the
interface indicated by ipMRouteInIfIndex. Packets which are
not subject to an incoming interface check (e.g., using CBT)
are not counted."
::= { ipMRouteEntry 9 }
ipMRouteProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast routing protocol via which this multicast
forwarding entry was learned."
::= { ipMRouteEntry 10 }
ipMRouteRtAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { ipMRouteEntry 11 }
ipMRouteRtMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask associated with the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { ipMRouteEntry 12 }
ipMRouteRtType OBJECT-TYPE
SYNTAX INTEGER {
unicast (1), -- Unicast route used in multicast RIB
multicast (2) -- Multicast route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason the given route was placed in the (logical)
multicast Routing Information Base (RIB). A value of
unicast means that the route would normally be placed only
in the unicast RIB, but was placed in the multicast RIB
(instead or in addition) due to local configuration, such as
when running PIM over RIP. A value of multicast means that
the route was explicitly added to the multicast RIB by the
routing protocol, such as DVMRP or Multiprotocol BGP."
::= { ipMRouteEntry 13 }
--
-- The IP Multicast Routing Next Hop Table
--
ipMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on the next-
hops on outgoing interfaces for routing IP multicast
datagrams. Each entry is one of a list of next-hops on
outgoing interfaces for particular sources sending to a
particular multicast group address."
::= { mfwdTables 2 }
ipMRouteNextHopEntry OBJECT-TYPE
SYNTAX IpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the list of next-hops on
outgoing interfaces to which IP multicast datagrams from
particular sources to a IP multicast group address are
routed. Discontinuities in counters in this entry can be
detected by observing the value of ipMRouteUpTime."
INDEX { ipMRouteNextHopOwnerId,
ipMRouteNextHopGroup, ipMRouteNextHopSource,
ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex,
ipMRouteNextHopAddress }
::= { ipMRouteNextHopTable 1 }
IpMRouteNextHopEntry ::= SEQUENCE {
ipMRouteNextHopOwnerId INTEGER,
ipMRouteNextHopGroup IpAddress,
ipMRouteNextHopSource IpAddress,
ipMRouteNextHopSourceMask IpAddress,
ipMRouteNextHopIfIndex InterfaceIndex,
ipMRouteNextHopAddress IpAddress,
ipMRouteNextHopState INTEGER,
ipMRouteNextHopUpTime TimeTicks
}
ipMRouteNextHopOwnerId OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This Value represents the owner id of the MRP which owns
the route entry."
::= { ipMRouteNextHopEntry 1 }
ipMRouteNextHopGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group for which this entry specifies a
next-hop on an outgoing interface."
::= { ipMRouteNextHopEntry 2 }
ipMRouteNextHopSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRouteNextHopSourceMask identifies
the sources for which this entry specifies a next-hop on an
outgoing interface."
::= { ipMRouteNextHopEntry 3 }
ipMRouteNextHopSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRouteNextHopSource identifies the sources for
which this entry specifies a next-hop on an outgoing
interface."
::= { ipMRouteNextHopEntry 4 }
ipMRouteNextHopIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for the outgoing
interface for this next-hop."
::= { ipMRouteNextHopEntry 5 }
ipMRouteNextHopAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next-hop specific to this entry. For
most interfaces, this is identical to ipMRouteNextHopGroup.
NBMA interfaces, however, may have multiple next-hop
addresses out a single outgoing interface."
::= { ipMRouteNextHopEntry 6 }
ipMRouteNextHopState OBJECT-TYPE
SYNTAX INTEGER { pruned(1), forwarding(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP datagrams. The value 'forwarding' indicates it
is currently being used; the value 'pruned' indicates it is
not."
::= { ipMRouteNextHopEntry 7 }
ipMRouteNextHopUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { ipMRouteNextHopEntry 8 }
--
-- The Multicast Routing Interface Table
--
ipMRouteInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRouteInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information specific to interfaces."
::= { mfwdTables 3 }
ipMRouteInterfaceEntry OBJECT-TYPE
SYNTAX IpMRouteInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for a particular interface."
INDEX { ipMRouteInterfaceIfIndex }
::= { ipMRouteInterfaceTable 1 }
IpMRouteInterfaceEntry ::= SEQUENCE {
ipMRouteInterfaceIfIndex InterfaceIndex,
ipMRouteInterfaceOwnerId Integer32,
ipMRouteInterfaceTtl Integer32,
ipMRouteInterfaceProtocol IANAipMRouteProtocol,
ipMRouteInterfaceRateLimit Integer32,
ipMRouteInterfaceCmdbPktCnt Counter32,
ipMRouteInterfaceInMcastOctets Counter32,
ipMRouteInterfaceOutMcastOctets Counter32
}
ipMRouteInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which this entry
contains information."
::= { ipMRouteInterfaceEntry 1 }
ipMRouteInterfaceOwnerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OwnerId value of the interface for which this entry
contains information."
::= { ipMRouteInterfaceEntry 2 }
ipMRouteInterfaceTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the
interface."
::= { ipMRouteInterfaceEntry 3 }
ipMRouteInterfaceProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing protocol running on this interface."
::= { ipMRouteInterfaceEntry 4 }
ipMRouteInterfaceRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done."
DEFVAL { 0 }
::= { ipMRouteInterfaceEntry 5 }
ipMRouteInterfaceInMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is similar to ifInOctets in the Interfaces MIB, except that
only multicast packets are counted."
::= { ipMRouteInterfaceEntry 6 }
ipMRouteInterfaceCmdbPktCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done."
::= { ipMRouteInterfaceEntry 7 }
ipMRouteInterfaceOutMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface."
::= { ipMRouteInterfaceEntry 8 }
-- conformance information
ipMRouteMIBConformance
OBJECT IDENTIFIER ::= { ipMRouteMIB 2 }
ipMRouteMIBCompliances
OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 1 }
ipMRouteMIBGroups OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 2 }
-- compliance statements
ipMRouteMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the IP Multicast MIB."
MODULE -- this module
MANDATORY-GROUPS { ipMRouteMIBBasicGroup,
ipMRouteMIBRouteGroup}
::= { ipMRouteMIBCompliances 1 }
ipMRouteMIBBasicGroup OBJECT-GROUP
OBJECTS { ipMRouteEnable, ipMRouteEntryCount,
ipMRouteUpstreamNeighbor, ipMRouteInIfIndex,
ipMRouteUpTime,
ipMRouteNextHopState,
ipMRouteNextHopUpTime,
ipMRouteInterfaceTtl,
ipMRouteInterfaceProtocol, ipMRouteInterfaceRateLimit,
ipMRouteProtocol
}
STATUS current
DESCRIPTION
"A collection of objects to support basic management of IP
Multicast routing."
::= { ipMRouteMIBGroups 1 }
ipMRouteMIBRouteGroup OBJECT-GROUP
OBJECTS { ipMRouteRtAddress,
ipMRouteRtMask, ipMRouteRtType }
STATUS current
DESCRIPTION
"A collection of objects providing information on the
relationship between multicast routing information, and the
IP Forwarding Table."
::= { ipMRouteMIBGroups 2 }
ipMRouteMIBPktsGroup OBJECT-GROUP
OBJECTS { ipMRoutePkts, ipMRouteDifferentInIfPackets
}
STATUS current
DESCRIPTION
"A collection of objects to support management of packet
counters for each forwarding entry."
::= { ipMRouteMIBGroups 3 }
END