WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

715
mibs/rfc/ESAFE-MIB Normal file
View File

@ -0,0 +1,715 @@
ESAFE-MIB DEFINITIONS ::= BEGIN
IMPORTS
ifIndex
FROM IF-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
enterprises
FROM SNMPv2-SMI -- RFC 2578
DateAndTime,
TruthValue,
PhysAddress
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF -- RFC 2580
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
-- These are the defined Cablelabs OID paths. Not all are needed for the eSAFE MIB,
-- but included here for sake of completeness.
cableLabs OBJECT IDENTIFIER ::= { enterprises 4491 }
clabFunction OBJECT IDENTIFIER ::= { cableLabs 1 }
clabFuncMib2 OBJECT IDENTIFIER ::= { clabFunction 1 }
clabFuncProprietary OBJECT IDENTIFIER ::= { clabFunction 2 }
clabProject OBJECT IDENTIFIER ::= { cableLabs 2 }
clabProjDocsis OBJECT IDENTIFIER ::= { clabProject 1 }
esafeMib MODULE-IDENTITY
LAST-UPDATED "200708030000Z" -- August 3, 2007
ORGANIZATION "Cable Television Laboratories, Inc."
CONTACT-INFO
"Postal: Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, CO 80027
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: mibs@cablelabs.com"
DESCRIPTION
"This MIB module provides the management objects necessary
to configure functionality of eSAFE components of a device
implementing an eDOCSIS compliant cable modem and one or
more eSAFE elements.
Copyright 1999-2007 Cable Television Laboratories, Inc.
All rights reserved."
REVISION "200708030000Z" -- August 3, 2007
DESCRIPTION
"This revision published as CM-SP-eDOCSIS-I13."
REVISION "200607280000Z" -- July 28, 2006
DESCRIPTION
"This revision published as CM-SP-eDOCSIS-I09."
::= { clabProjDocsis 14 }
-- Administrative assignments
-- esafeNotifications OBJECT IDENTIFIER ::= { esafeMib 0 }
esafeMibObjects OBJECT IDENTIFIER ::= { esafeMib 1 }
esafeBase OBJECT IDENTIFIER ::= { esafeMibObjects 1 }
esafePsMibObjects OBJECT IDENTIFIER ::= { esafeMibObjects 2 }
esafeMtaMibObjects OBJECT IDENTIFIER ::= { esafeMibObjects 3 }
esafeStbMibObjects OBJECT IDENTIFIER ::= { esafeMibObjects 4 }
esafeErouterMibObjects OBJECT IDENTIFIER ::= { esafeMibObjects 5 }
-- Object Groups
--
-- eSAFE Base Objects
--
esafeProvisioningStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsafeProvisioningStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the current provisioning
status of each implemented eSAFE, and information
about the last failure or exception condition in
the eSAFE provisioning process, if applicable."
::= { esafeBase 1 }
esafeProvisioningStatusEntry OBJECT-TYPE
SYNTAX EsafeProvisioningStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for
each eSAFE implemented in the eDOCSIS
compliant device."
INDEX { ifIndex }
::= { esafeProvisioningStatusTable 1 }
EsafeProvisioningStatusEntry ::=SEQUENCE
{
esafeProvisioningStatusProgress INTEGER,
esafeProvisioningStatusFailureFound TruthValue,
esafeProvisioningStatusFailureFlow SnmpAdminString,
esafeProvisioningStatusFailureEventID Unsigned32,
esafeProvisioningStatusFailureErrorText SnmpAdminString,
esafeProvisioningStatusLastUpdate DateAndTime
}
esafeProvisioningStatusProgress OBJECT-TYPE
SYNTAX INTEGER {
notInitiated(1),
inProgress(2),
finished(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the eSAFE provisioning process.
notInitiated(1) indicates that the eSAFE has not yet
begun its provisioning process.
inProgress(2) indicates that the eSAFE is in the process
of provisioning.
finished(3) indicates that the eSAFE completed
its provisioning process.
Provisioning success or failure information is provided by
esafeProvisioningStatusFailureFound and may also be
extended by specific eSAFE MIB objects."
REFERENCE
"CableHome PSDEV MIB Specification
CH-SP-MIB-PSDEV-C01-060728, Section 4, cabhPsDevProvState
object."
::={ esafeProvisioningStatusEntry 1 }
esafeProvisioningStatusFailureFound OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"true(1) indicates that the eSAFE encountered
an error condition during the provisioning
process. An eSAFE could start a looping process
from a previous flow step after a failure,
therefore this value is retained until the
flow step that initially failed eventually
passes or is updated with another error
condition.
The eSAFE device needs to reflect in the value of
'esafePsProvisioningStatusFailureFound' any recognized
errors even if it is still in the process of
provisioning, i.e., when
esafeProvisioningStatusProgress has a value of
inProgress(2).
Other eSAFE specifications provide the requirements for
those eSAFE devices with respect to this object."
REFERENCE
"PacketCable Provisioning specification,
Provisioning Overview section; CableHome
specification, Provisioning Processes
section."
::={ esafeProvisioningStatusEntry 2 }
esafeProvisioningStatusFailureFlow OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If esafeProvisioningStatusFailureFound
is true(1) this object contains the
label for the provisioning flow step
in which the error condition was
encountered, otherwise an empty value
is reported.
The value of this object corresponds to
the provisioning sequence 'Flow Step'
designator for the associated eSAFE, as
defined in the eSAFE specification. For
example, an ePS will report a value such as
CHPSWMD-1, and an eMTA will report a value
such as MTA-1.
Other eSAFE specifications provide the requirements for
those eSAFE devices with respect to this object."
REFERENCE
"PacketCable Provisioning specification,
Provisioning Overview section; CableHome
specification, Provisioning Processes
section."
::={ esafeProvisioningStatusEntry 3 }
esafeProvisioningStatusFailureEventID OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If esafeProvisioningStatusFailureFound
is true(1) this object contains the
eSAFE log error Event Identifier defined
in the eSAFE specification, otherwise
it returns a value '0'. For an eMTA type
eSAFE, this object reports the PacketCable
EventID value from the Provisioning Events
table, e.g., 65535. For an ePS type eSAFE,
this object reports the EventID value from
the Defined Events for CableHome table, e.g.,
68000100.
Other eSAFE specifications provide the requirements for
those eSAFE devices with respect to this object."
REFERENCE
"PacketCable Provisioning specification,
Appendix I Provisioning Events; CableHome
specification, Appendix II Format and Content
for Event, SYSLOG, and SNMP Trap."
::={ esafeProvisioningStatusEntry 4 }
esafeProvisioningStatusFailureErrorText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If esafeProvisioningStatusFailureFound
is true(1) this object contains the eSAFE
log error messages based on the eSAFE
specification, otherwise it returns an
empty string. For an eMTA type eSAFE, this
object reports the value from the
'Comments' column of the Provisioning
Events table, e.g., 'The DNS Response
from the DNS server did not resolve
the TFTP FQDN.' For an ePS type
eSAFE this object reports the value
from the 'Event Text' column of the
Defined Events for CableHome table,
e.g., 'DHCP Failed - Discover sent,
no offer received'.
Other eSAFE specifications provide the requirements for
those eSAFE devices with respect to this object."
REFERENCE
"PacketCable Provisioning specification,
PacketCable Management Event Mechanism specification;
CableHome specification, Appendix II Format and Content
for Event, SYSLOG, and SNMP Trap."
::={ esafeProvisioningStatusEntry 5 }
esafeProvisioningStatusLastUpdate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the eCM docsDevDateTime when
this row entry was last updated."
::={ esafeProvisioningStatusEntry 6 }
esafeDevStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsafeDevStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries that provide the SNMP manager
with status information pertaining to each implemented
eSAFE device. While this table MUST be implemented by all
eDOCSIS devices, the support for reporting such information
and the status conditions supported will be determined by
the corresponding eSAFE specifications. It is highly
recommended that the eSAFE MIBs themselves have objects
to specify more detailed information."
::= { esafeBase 2 }
esafeDevStatusEntry OBJECT-TYPE
SYNTAX EsafeDevStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table MUST be created for each eSAFE
device behind the eCM. The index needs to be the
corresponding index in the ifTable for the associated
eSAFE device."
INDEX { ifIndex }
::= { esafeDevStatusTable 1 }
EsafeDevStatusEntry ::=SEQUENCE
{
esafeDevServiceIntImpact INTEGER,
esafeDevServiceIntImpactInfo SnmpAdminString
}
esafeDevServiceIntImpact OBJECT-TYPE
SYNTAX INTEGER {
significant(1),
none(2),
unsupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this MIB object indicates the service
interruption impact assessment of the corresponding eSAFE
device as determined by the current status of the eSAFE
device, in accordance with the directives provided in the
eSAFE specification.
If esafeDevServiceIntImpact is set to significant (1), it
indicates that the corresponding eSAFE device (as per the
eSAFE specification) identifies a significant impact on the
active services at the given point in time. This impact
level is highly recommended for critical or real-time
services, though the impact assessment is left to the
directives provided by the associated eSAFE specification.
If esafeDevServiceIntImpact is set to none (2), it
indicates that the corresponding eSAFE device (as per the
eSAFE specification) identifies no significant impact on
the services offered at the given point in time.
If esafeDevServiceIntImpact is unsupported(3), it indicates
that the corresponding eSAFE device has no known interfaces
to support this feature or the eSAFE specification does not
recommend this feature.
If the eSAFE specification specifies the use of this
mechanism then it MUST define definitive states for the
impacts (significant or none) and the value of
unsupported(3) MUST not be used by the eDOCSIS device
for that eSAFE interface.
However, if the corresponding eSAFE specification does not
provide any directives then the value MUST be set to
unsupported(3).
If there exists multiple services being offered by an eSAFE
device (Either multiple services or multiple instances of
the same service), this MIB MUST indicate the highest
possible impact and other impact information SHOULD be
populated in the associated esafeDevServiceIntImpactInfo
table."
::={ esafeDevStatusEntry 1 }
esafeDevServiceIntImpactInfo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides more information to the SNMP Managers
regarding the condition reported in
esafeDevServiceIntImpact. The eSAFE device vendor could use
this to fill in specific vendor strings or values that
could add value or provide more information related to the
status.
Examples:
For eMTA devices:
Lines 1 and 3 have active connections, Line 2 is not
provisioned.
<Value of the corresponding MIB object in the eMTA
MIBs, if applicable>
For other eSAFE devices:
Critical video streaming in progress, please wait for
5.30 minutes
<Value of the corresponding MIB object in the eSAFE
MIBs, if applicable>.
The device MUST report 'No Additional Information' in case
the associated eSAFE vendor cannot obtain information from
the eSAFE device."
::={ esafeDevStatusEntry 2 }
--
-- Objects that apply to an eCM with an ePS type eSAFE.
--
esafePsCableHomeModeControl OBJECT-TYPE
SYNTAX INTEGER {
disabledMode(1),
provSystem(2),
dormantCHMode(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides control over the mode of
operation of the CableHome ePS eSAFE element
of the eDOCSIS compliant device.
When this object is set to disabledMode(1), the
ePS eSAFE element is instructed to switch to
CableHome Disabled Mode operation.
When this object is set to provSystem(2), the ePS
eSAFE element restarts its provisioning process.
When this object is set to dormantCHMode(3), the ePS
eSAFE element is instructed to switch to CableHome
Dormant Mode operation. In this mode the ePS restarts
its provisioning process omitting CableHome-specific
DHCP Options 60 and 43 in the DHCP DISCOVER and
DHCP REQUEST messages, acquires an IP address lease from
the cable operator's DHCP server, and operates in unmanaged
Dormant CableHome Mode regardless of the values of the file
and siaddr fields or of the values of DHCP options that
might otherwise configure the ePS to operate in DHCP
Provisioning Mode or in SNMP Provisioning Mode.
The value of this object MUST persist across cable modem
resets."
REFERENCE
"CableHome specifications, CableHome Operational
Modes section."
DEFVAL { dormantCHMode }
::= { esafePsMibObjects 1 }
esafePsCableHomeModeStatus OBJECT-TYPE
SYNTAX INTEGER {
disabledMode(1),
dormantCHMode(2),
cableHomeMode(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides visibility to the current
mode of operation of the CableHome ePS eSAFE
element of the eDOCSIS compliant device.
If the value of this object is disabledMode(1), the
ePS eSAFE element is currently operating in CableHome
Disabled Mode.
If the value of this object is dormantCHMode(2), the
ePS is currently operating in Dormant CableHome Mode.
If the value of this object is cableHomeMode(3), the ePS
is currently operating in CableHome mode."
REFERENCE
"CableHome specification, CableHome Operational Models
section."
::= { esafePsMibObjects 2 }
--
-- Objects that apply to an eCM with an eRouter type eSAFE.
--
esafeErouterAdminMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ipv4Only(2),
ipv6Only(3),
ipv4AndIpv6(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides visibility to the mode of
operation to which the DOCSIS eRouter eSAFE element
was set via TLV in the cable modem configuration file.
If the value of this object is disabled(1), the
eRouter was configured via TLV in the cable modem
configuration file to not initialize as described
in the eRouter Initialization section of the CableLabs
IPv4 and IPv6 eRouter Specification.
If the value of this object is ipv4Only(2), the
eRouter was configured via TLV in the cable modem
configuration file to operate with an IPv4 network
address and with the IPv4 stack operational and to
operate without an IPv6 network address and to not
run an IPv6 protocol stack.
If the value of this object is ipv6Only(3), the
eRouter was configured via TLV in the cable modem
configuration file to operate with an IPv6 network
address and with the IPv6 stack operational and to
operate without an IPv4 network address and to not
run an IPv4 protocol stack.
If the value of this object is ipv4AndIpv6(4), the
eRouter was configured via TLV in the cable modem
configuration file to operate with an IPv4 network
address and an IPv6 network address and to run both
IPv4 and IPv6 protocol stacks."
REFERENCE
"DOCSIS IPv4 and IPv6 eRouter Specification,
CM-SP-eRouter-I02-070223."
::= { esafeErouterMibObjects 1 }
esafeErouterOperMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ipv4OnlyFwding(2),
ipv6OnlyFwding(3),
ipv4AndIpv6Fwding(4),
noIpv4AndNoIpv6Fwding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides visibility to the current
mode of operation of the DOCSIS eRouter eSAFE
element of the eDOCSIS compliant device.
If the value of this object is disabled(1),
the eRouter eSAFE element has been administratively
Disabled. The eDOCSIS device will bridge traffic
according to the configuration of the DOCSIS
embedded cable modem (eCM)
If the value of this object is ipv4OnlyFwding(2),
the eRouter eSAFE element is currently operating
with the IPv4 protocol stack operational, is
forwarding IPv4 traffic, and is not running an
IPv6 protocol stack and not forwarding IPv6 traffic.
If the value of this object is ipv6OnlyFwding(3),
the eRouter eSAFE element is currently operating
with the IPv6 protocol stack operational, is
forwarding IPv6 traffic, and is not running an
IPv4 protocol stack and not forwarding IPv4 traffic.
If the value of this object is ipv4AndIpv6Fwding(4),
the eRouter eSAFE element is currently operating
with both the IPv4 protocol stack and IPv6 protocol
stack operational, and is forwarding IPv4 and IPv6
traffic.
If the value of this object is noIpv4AndNoIpv6Fwding(5),
the eRouter is currently operating with neither the IPv4
nor IPv6 protocol stack running. The eRouter is unable to
pass traffic between the Operator-Facing Interface and the
Customer-Facing Interface. "
REFERENCE
"DOCSIS IPv4 and IPv6 eRouter Specification,
CM-SP-eRouter-I02-070223."
::= { esafeErouterMibObjects 2 }
esafeErouterPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical address of the operator-facing interface
of the DOCSIS eRouter eSAFE element."
::= { esafeErouterMibObjects 3 }
esafeErouterInitModeControl OBJECT-TYPE
SYNTAX INTEGER {
ipDisabled(1),
ipv4Only(2),
ipv6Only(3),
ipv4AndIpv6(4),
honoreRouterInitMode(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides control over the initialization
mode of the DOCSIS eRouter eSAFE element. Except
when set to honoreRouterInitMode(5), the value of this
object MUST override all Initialization Mode and
Operation Mode encodings encapsulated in the eCM
configuration file, e.g. TLV 202.1.
This object can only be set via an SNMP management
Station. This object cannot be included in the eCM
configuration file.
When this object is set to ipDisabled(1), the eRouter
is instructed to switch to IP Protocol Disabled Mode
and transparently bridge all traffic as described in
the eRouter Initialization section of the CableLabs
IPv4 and IPv6 eRouter Specification.
When this object is set to ipv4Only(2), the eRouter
is instructed to switch to IPv4 Protocol Enabled Mode.
When this object is set to ipv6Only(3), the eRouter
is instructed to switch to IPv6 Protocol Enabled Mode.
When this object is set to ipv4AndIpv6(4), the eRouter
is instructed to switch to Dual IP Protocol Enabled Mode.
When this object is set to honoreRouterInitMode(5), the
eRouter is instructed to honor the eRouter Initialization
Mode Encoding encapsulated in the eCM Config File under
TLV 202 as described in the Configuration of eRouter
Operational Parameters section of the CableLabs eRouter
Specification.
The value of this object MUST persist across cable modem
resets."
REFERENCE
"DOCSIS IPv4 and IPv6 eRouter Specification,
CM-SP-eRouter-I09-130404 Annex B.3."
DEFVAL { honoreRouterInitMode }
::= { esafeErouterMibObjects 4 }
esafeErouterSoftReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides a mechanism to soft reset the
DOCSIS eRouter eSAFE element.
This object can only be set via an SNMP management
Station. This object cannot be included in the eCM
configuration file.
Setting this object to true(1) causes the DOCSIS
eRouter eSAFE element to perform a soft reset, without
reseting the eCM. Reading this object always returns
false(2).
When esafeErouterSoftReset is set to true(1), the
eRouter performs a Soft Reset as described in Annex
B.5 of [eRouter].
The value of esafeErouterSoftReset object MUST NOT
persist across cable modem reinitialization."
REFERENCE
"DOCSIS IPv4 and IPv6 eRouter Specification,
CM-SP-eRouter-I09-130404 Annex B.5."
::= { esafeErouterMibObjects 5 }
-- Conformance information
esafeMibConformance OBJECT IDENTIFIER ::= { esafeMib 2 }
esafeMibCompliances OBJECT IDENTIFIER ::= { esafeMibConformance 1 }
esafeMibGroups OBJECT IDENTIFIER ::= { esafeMibConformance 2 }
-- Compliance statements
esafeMibBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for eSAFE MIB objects."
MODULE -- eSAFE-MIB
-- unconditionally mandatory groups
MANDATORY-GROUPS {
esafeBaseGroup
}
-- conditionally mandatory groups
GROUP esafePsMibGroup
DESCRIPTION
"This group is implemented only by eDOCSIS devices
that implement an embedded Portal Services logical
element (ePS) compliant with CableLabs
CableHome specifications."
GROUP esafeErouterMibGroup
DESCRIPTION
"This group is implemented only by eDOCSIS devices
that implement a DOCSIS embedded router (eRouter)
element compliant with CableLabs DOCSIS eRouter
specifications."
::= { esafeMibCompliances 1 }
-- eSAFE Base Group Declarations
esafeBaseGroup OBJECT-GROUP
OBJECTS {
esafeProvisioningStatusProgress,
esafeProvisioningStatusFailureFound,
esafeProvisioningStatusFailureFlow,
esafeProvisioningStatusFailureEventID,
esafeProvisioningStatusFailureErrorText,
esafeProvisioningStatusLastUpdate,
esafeDevServiceIntImpact,
esafeDevServiceIntImpactInfo
}
STATUS current
DESCRIPTION
"Group of eSAFE Base objects in the eSAFE MIB."
::= { esafeMibGroups 1 }
-- PS MIB Group
esafePsMibGroup OBJECT-GROUP
OBJECTS {
esafePsCableHomeModeControl,
esafePsCableHomeModeStatus
}
STATUS current
DESCRIPTION
"Group of embedded PS-specific objects
in the eSAFE MIB."
::= { esafeMibGroups 2 }
-- eRouter MIB Group
esafeErouterMibGroup OBJECT-GROUP
OBJECTS {
esafeErouterAdminMode,
esafeErouterOperMode,
esafeErouterPhysAddress,
esafeErouterInitModeControl,
esafeErouterSoftReset
}
STATUS current
DESCRIPTION
"Group of embedded Router-specific objects
in the eSAFE MIB."
::= { esafeMibGroups 3 }
END