initial commit; version 22.5.12042
This commit is contained in:
646
mibs/rfc/CHARACTER-MIB
Normal file
646
mibs/rfc/CHARACTER-MIB
Normal file
@ -0,0 +1,646 @@
|
||||
CHARACTER-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
||||
Counter32, Integer32, Gauge32, TimeTicks
|
||||
FROM SNMPv2-SMI
|
||||
AutonomousType, InstancePointer
|
||||
FROM SNMPv2-TC
|
||||
InterfaceIndex
|
||||
FROM IF-MIB
|
||||
transmission, mib-2
|
||||
FROM RFC1213-MIB
|
||||
MODULE-COMPLIANCE, OBJECT-GROUP
|
||||
FROM SNMPv2-CONF;
|
||||
|
||||
char MODULE-IDENTITY
|
||||
LAST-UPDATED "9405261700Z"
|
||||
ORGANIZATION "IETF Character MIB Working Group"
|
||||
CONTACT-INFO
|
||||
" Bob Stewart
|
||||
Postal: Xyplex, Inc.
|
||||
295 Foster Street
|
||||
Littleton, MA 01460
|
||||
|
||||
Tel: 508-952-4816
|
||||
Fax: 508-952-4887
|
||||
|
||||
E-mail: rlstewart@eng.xyplex.com"
|
||||
DESCRIPTION
|
||||
"The MIB module for character stream devices."
|
||||
::= { mib-2 19 }
|
||||
|
||||
PortIndex ::= TEXTUAL-CONVENTION
|
||||
DISPLAY-HINT "d"
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A unique value, greater than zero, for each
|
||||
character port in the managed system. It is
|
||||
recommended that values are assigned contiguously
|
||||
starting from 1. The value for each interface sub-
|
||||
layer must remain constant at least from one re-
|
||||
initialization of the entity's network management
|
||||
system to the next re-initialization.
|
||||
|
||||
In a system where the character ports are attached
|
||||
to hardware represented by an ifIndex, it is
|
||||
conventional, but not required, to make the
|
||||
character port index equal to the corresponding
|
||||
ifIndex."
|
||||
SYNTAX Integer32
|
||||
|
||||
-- Generic Character information
|
||||
|
||||
charNumber OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The number of entries in charPortTable, regardless
|
||||
of their current state."
|
||||
::= { char 1 }
|
||||
|
||||
-- the Character Port table
|
||||
|
||||
charPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CharPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A list of port entries. The number of entries is
|
||||
given by the value of charNumber."
|
||||
::= { char 2 }
|
||||
|
||||
charPortEntry OBJECT-TYPE
|
||||
SYNTAX CharPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Status and parameter values for a character port."
|
||||
INDEX { charPortIndex }
|
||||
::= { charPortTable 1 }
|
||||
|
||||
CharPortEntry ::=
|
||||
SEQUENCE {
|
||||
charPortIndex
|
||||
PortIndex,
|
||||
charPortName
|
||||
DisplayString,
|
||||
charPortType
|
||||
INTEGER,
|
||||
charPortHardware
|
||||
AutonomousType,
|
||||
charPortReset
|
||||
INTEGER,
|
||||
charPortAdminStatus
|
||||
INTEGER,
|
||||
charPortOperStatus
|
||||
INTEGER,
|
||||
charPortLastChange
|
||||
TimeTicks,
|
||||
charPortInFlowType
|
||||
INTEGER,
|
||||
charPortOutFlowType
|
||||
INTEGER,
|
||||
charPortInFlowState
|
||||
INTEGER,
|
||||
charPortOutFlowState
|
||||
INTEGER,
|
||||
charPortInCharacters
|
||||
Counter32,
|
||||
charPortOutCharacters
|
||||
Counter32,
|
||||
charPortAdminOrigin
|
||||
INTEGER,
|
||||
charPortSessionMaximum
|
||||
INTEGER,
|
||||
charPortSessionNumber
|
||||
Gauge32,
|
||||
charPortSessionIndex
|
||||
INTEGER,
|
||||
charPortInFlowTypes
|
||||
|
||||
OCTET STRING,
|
||||
charPortOutFlowTypes
|
||||
OCTET STRING,
|
||||
charPortLowerIfIndex
|
||||
InterfaceIndex
|
||||
}
|
||||
|
||||
charPortIndex OBJECT-TYPE
|
||||
SYNTAX PortIndex
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A unique value for each character port, perhaps
|
||||
corresponding to the same value of ifIndex when the
|
||||
character port is associated with a hardware port
|
||||
represented by an ifIndex."
|
||||
::= { charPortEntry 1 }
|
||||
|
||||
charPortName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..32))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An administratively assigned name for the port,
|
||||
typically with some local significance."
|
||||
::= { charPortEntry 2 }
|
||||
|
||||
charPortType OBJECT-TYPE
|
||||
SYNTAX INTEGER { physical(1), virtual(2) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The port's type, 'physical' if the port represents
|
||||
an external hardware connector, 'virtual' if it does
|
||||
not."
|
||||
::= { charPortEntry 3 }
|
||||
|
||||
charPortHardware OBJECT-TYPE
|
||||
SYNTAX AutonomousType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A reference to hardware MIB definitions specific to
|
||||
a physical port's external connector. For example,
|
||||
if the connector is RS-232, then the value of this
|
||||
object refers to a MIB sub-tree defining objects
|
||||
specific to RS-232. If an agent is not configured
|
||||
to have such values, the agent returns the object
|
||||
|
||||
identifier:
|
||||
|
||||
nullHardware OBJECT IDENTIFIER ::= { 0 0 }
|
||||
"
|
||||
::= { charPortEntry 4 }
|
||||
|
||||
charPortReset OBJECT-TYPE
|
||||
SYNTAX INTEGER { ready(1), execute(2) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A control to force the port into a clean, initial
|
||||
state, both hardware and software, disconnecting all
|
||||
the port's existing sessions. In response to a
|
||||
get-request or get-next-request, the agent always
|
||||
returns 'ready' as the value. Setting the value to
|
||||
'execute' causes a reset."
|
||||
::= { charPortEntry 5 }
|
||||
|
||||
charPortAdminStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER { enabled(1), disabled(2), off(3),
|
||||
maintenance(4) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The port's desired state, independent of flow
|
||||
control. 'enabled' indicates that the port is
|
||||
allowed to pass characters and form new sessions.
|
||||
'disabled' indicates that the port is allowed to
|
||||
pass characters but not form new sessions. 'off'
|
||||
indicates that the port is not allowed to pass
|
||||
characters or have any sessions. 'maintenance'
|
||||
indicates a maintenance mode, exclusive of normal
|
||||
operation, such as running a test.
|
||||
|
||||
'enabled' corresponds to ifAdminStatus 'up'.
|
||||
'disabled' and 'off' correspond to ifAdminStatus
|
||||
'down'. 'maintenance' corresponds to ifAdminStatus
|
||||
'test'."
|
||||
::= { charPortEntry 6 }
|
||||
|
||||
charPortOperStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER { up(1), down(2),
|
||||
maintenance(3), absent(4), active(5) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The port's actual, operational state, independent
|
||||
|
||||
of flow control. 'up' indicates able to function
|
||||
normally. 'down' indicates inability to function
|
||||
for administrative or operational reasons.
|
||||
'maintenance' indicates a maintenance mode,
|
||||
exclusive of normal operation, such as running a
|
||||
test. 'absent' indicates that port hardware is not
|
||||
present. 'active' indicates up with a user present
|
||||
(e.g. logged in).
|
||||
|
||||
'up' and 'active' correspond to ifOperStatus 'up'.
|
||||
'down' and 'absent' correspond to ifOperStatus
|
||||
'down'. 'maintenance' corresponds to ifOperStatus
|
||||
'test'."
|
||||
::= { charPortEntry 7 }
|
||||
|
||||
charPortLastChange OBJECT-TYPE
|
||||
SYNTAX TimeTicks
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of sysUpTime at the time the port entered
|
||||
its current operational state. If the current state
|
||||
was entered prior to the last reinitialization of
|
||||
the local network management subsystem, then this
|
||||
object contains a zero value."
|
||||
::= { charPortEntry 8 }
|
||||
|
||||
-- charPortInFlowType is deprecated in favor of
|
||||
-- charPortInFlowTypes
|
||||
|
||||
charPortInFlowType OBJECT-TYPE
|
||||
SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),
|
||||
ctsRts(4), dsrDtr(5) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
"The port's type of input flow control. 'none'
|
||||
indicates no flow control at this level or below.
|
||||
'xonXoff' indicates software flow control by
|
||||
recognizing XON and XOFF characters. 'hardware'
|
||||
indicates flow control delegated to the lower level,
|
||||
for example a parallel port.
|
||||
|
||||
'ctsRts' and 'dsrDtr' are specific to RS-232-like
|
||||
ports. Although not architecturally pure, they are
|
||||
included here for simplicity's sake."
|
||||
::= { charPortEntry 9 }
|
||||
|
||||
-- charPortOutFlowType is deprecated in favor of
|
||||
-- charPortOutFlowTypes
|
||||
|
||||
charPortOutFlowType OBJECT-TYPE
|
||||
SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),
|
||||
ctsRts(4), dsrDtr(5) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
"The port's type of output flow control. 'none'
|
||||
indicates no flow control at this level or below.
|
||||
'xonXoff' indicates software flow control by
|
||||
recognizing XON and XOFF characters. 'hardware'
|
||||
indicates flow control delegated to the lower level,
|
||||
for example a parallel port.
|
||||
|
||||
'ctsRts' and 'dsrDtr' are specific to RS-232-like
|
||||
ports. Although not architecturally pure, they are
|
||||
included here for simplicy's sake."
|
||||
::= { charPortEntry 10 }
|
||||
|
||||
charPortInFlowState OBJECT-TYPE
|
||||
SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current operational state of input flow control
|
||||
on the port. 'none' indicates not applicable.
|
||||
'unknown' indicates this level does not know.
|
||||
'stop' indicates flow not allowed. 'go' indicates
|
||||
flow allowed."
|
||||
::= { charPortEntry 11 }
|
||||
|
||||
charPortOutFlowState OBJECT-TYPE
|
||||
SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current operational state of output flow
|
||||
control on the port. 'none' indicates not
|
||||
applicable. 'unknown' indicates this level does not
|
||||
know. 'stop' indicates flow not allowed. 'go'
|
||||
indicates flow allowed."
|
||||
::= { charPortEntry 12 }
|
||||
|
||||
charPortInCharacters OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Total number of characters detected as input from
|
||||
the port since system re-initialization and while
|
||||
the port operational state was 'up', 'active', or
|
||||
'maintenance', including, for example, framing, flow
|
||||
control (i.e. XON and XOFF), each occurrence of a
|
||||
BREAK condition, locally-processed input, and input
|
||||
sent to all sessions."
|
||||
::= { charPortEntry 13 }
|
||||
|
||||
charPortOutCharacters OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Total number of characters detected as output to
|
||||
the port since system re-initialization and while
|
||||
the port operational state was 'up', 'active', or
|
||||
'maintenance', including, for example, framing, flow
|
||||
control (i.e. XON and XOFF), each occurrence of a
|
||||
BREAK condition, locally-created output, and output
|
||||
received from all sessions."
|
||||
::= { charPortEntry 14 }
|
||||
|
||||
charPortAdminOrigin OBJECT-TYPE
|
||||
SYNTAX INTEGER { dynamic(1), network(2), local(3),
|
||||
none(4) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The administratively allowed origin for
|
||||
establishing session on the port. 'dynamic' allows
|
||||
'network' or 'local' session establishment. 'none'
|
||||
disallows session establishment."
|
||||
::= { charPortEntry 15 }
|
||||
|
||||
charPortSessionMaximum OBJECT-TYPE
|
||||
SYNTAX INTEGER (-1..2147483647)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum number of concurrent sessions allowed
|
||||
on the port. A value of -1 indicates no maximum.
|
||||
Setting the maximum to less than the current number
|
||||
of sessions has unspecified results."
|
||||
::= { charPortEntry 16 }
|
||||
|
||||
charPortSessionNumber OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The number of open sessions on the port that are in
|
||||
the connecting, connected, or disconnecting state."
|
||||
::= { charPortEntry 17 }
|
||||
|
||||
charPortSessionIndex OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..2147483647)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of charSessIndex for the port's first or
|
||||
only active session. If the port has no active
|
||||
session, the agent returns the value zero."
|
||||
::= { charPortEntry 18 }
|
||||
|
||||
charPortInFlowTypes OBJECT-TYPE
|
||||
SYNTAX OCTET STRING (SIZE (1))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The port's types of input flow control at the
|
||||
software level. Hardware-level flow control is
|
||||
independently controlled by the appropriate
|
||||
hardware-level MIB.
|
||||
|
||||
A value of zero indicates no flow control.
|
||||
Depending on the specific implementation, any or
|
||||
all combinations of flow control may be chosen by
|
||||
adding the values:
|
||||
|
||||
128 xonXoff, recognizing XON and XOFF characters
|
||||
64 enqHost, ENQ/ACK to allow input to host
|
||||
32 enqTerm, ACK to allow output to port
|
||||
"
|
||||
::= { charPortEntry 19 }
|
||||
|
||||
charPortOutFlowTypes OBJECT-TYPE
|
||||
SYNTAX OCTET STRING (SIZE (1))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The port's types of output flow control at the
|
||||
software level. Hardware-level flow control is
|
||||
independently controlled by the appropriate
|
||||
|
||||
hardware-level MIB.
|
||||
|
||||
A value of zero indicates no flow control.
|
||||
Depending on the specific implementation, any or
|
||||
all combinations of flow control may be chosen by
|
||||
adding the values:
|
||||
|
||||
128 xonXoff, recognizing XON and XOFF characters
|
||||
64 enqHost, ENQ/ACK to allow input to host
|
||||
32 enqTerm, ACK to allow output to port
|
||||
"
|
||||
::= { charPortEntry 20 }
|
||||
|
||||
charPortLowerIfIndex OBJECT-TYPE
|
||||
SYNTAX InterfaceIndex
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ifIndex value of the lower level hardware supporting
|
||||
this character port, zero if none."
|
||||
::= { charPortEntry 21 }
|
||||
|
||||
-- the Character Session table
|
||||
|
||||
charSessTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CharSessEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A list of port session entries."
|
||||
::= { char 3 }
|
||||
|
||||
charSessEntry OBJECT-TYPE
|
||||
SYNTAX CharSessEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Status and parameter values for a character port
|
||||
session."
|
||||
INDEX { charSessPortIndex, charSessIndex }
|
||||
::= { charSessTable 1 }
|
||||
|
||||
CharSessEntry ::=
|
||||
SEQUENCE {
|
||||
charSessPortIndex
|
||||
PortIndex,
|
||||
charSessIndex
|
||||
|
||||
INTEGER,
|
||||
charSessKill
|
||||
INTEGER,
|
||||
charSessState
|
||||
INTEGER,
|
||||
charSessProtocol
|
||||
AutonomousType,
|
||||
charSessOperOrigin
|
||||
INTEGER,
|
||||
charSessInCharacters
|
||||
Counter32,
|
||||
charSessOutCharacters
|
||||
Counter32,
|
||||
charSessConnectionId
|
||||
InstancePointer,
|
||||
charSessStartTime
|
||||
TimeTicks
|
||||
}
|
||||
|
||||
charSessPortIndex OBJECT-TYPE
|
||||
SYNTAX PortIndex
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of charPortIndex for the port to which
|
||||
this session belongs."
|
||||
::= { charSessEntry 1 }
|
||||
|
||||
charSessIndex OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..2147483647)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The session index in the context of the port, a
|
||||
non-zero positive integer. Session indexes within a
|
||||
port need not be sequential. Session indexes may be
|
||||
reused for different ports. For example, port 1 and
|
||||
port 3 may both have a session 2 at the same time.
|
||||
Session indexes may have any valid integer value,
|
||||
with any meaning convenient to the agent
|
||||
implementation."
|
||||
::= { charSessEntry 2 }
|
||||
|
||||
charSessKill OBJECT-TYPE
|
||||
SYNTAX INTEGER { ready(1), execute(2) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A control to terminate the session. In response to
|
||||
a get-request or get-next-request, the agent always
|
||||
returns 'ready' as the value. Setting the value to
|
||||
'execute' causes termination."
|
||||
::= { charSessEntry 3 }
|
||||
|
||||
charSessState OBJECT-TYPE
|
||||
SYNTAX INTEGER { connecting(1), connected(2),
|
||||
disconnecting(3) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current operational state of the session,
|
||||
disregarding flow control. 'connected' indicates
|
||||
that character data could flow on the network side
|
||||
of session. 'connecting' indicates moving from
|
||||
nonexistent toward 'connected'. 'disconnecting'
|
||||
indicates moving from 'connected' or 'connecting' to
|
||||
nonexistent."
|
||||
::= { charSessEntry 4 }
|
||||
|
||||
charSessProtocol OBJECT-TYPE
|
||||
SYNTAX AutonomousType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The network protocol over which the session is
|
||||
running. Other OBJECT IDENTIFIER values may be
|
||||
defined elsewhere, in association with specific
|
||||
protocols. However, this document assigns those of
|
||||
known interest as of this writing."
|
||||
::= { charSessEntry 5 }
|
||||
|
||||
wellKnownProtocols OBJECT IDENTIFIER ::= { char 4 }
|
||||
|
||||
protocolOther OBJECT IDENTIFIER ::= { wellKnownProtocols 1 }
|
||||
protocolTelnet OBJECT IDENTIFIER ::= { wellKnownProtocols 2 }
|
||||
protocolRlogin OBJECT IDENTIFIER ::= { wellKnownProtocols 3 }
|
||||
protocolLat OBJECT IDENTIFIER ::= { wellKnownProtocols 4 }
|
||||
protocolX29 OBJECT IDENTIFIER ::= { wellKnownProtocols 5 }
|
||||
protocolVtp OBJECT IDENTIFIER ::= { wellKnownProtocols 6 }
|
||||
|
||||
charSessOperOrigin OBJECT-TYPE
|
||||
SYNTAX INTEGER { unknown(1), network(2), local(3) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The session's source of establishment."
|
||||
::= { charSessEntry 6 }
|
||||
|
||||
charSessInCharacters OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This session's subset of charPortInCharacters."
|
||||
::= { charSessEntry 7 }
|
||||
|
||||
charSessOutCharacters OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This session's subset of charPortOutCharacters."
|
||||
::= { charSessEntry 8 }
|
||||
|
||||
charSessConnectionId OBJECT-TYPE
|
||||
SYNTAX InstancePointer
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A reference to additional local MIB information.
|
||||
This should be the highest available related MIB,
|
||||
corresponding to charSessProtocol, such as Telnet.
|
||||
For example, the value for a TCP connection (in the
|
||||
absence of a Telnet MIB) is the object identifier of
|
||||
tcpConnState. If an agent is not configured to have
|
||||
such values, the agent returns the object
|
||||
identifier:
|
||||
|
||||
nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }
|
||||
"
|
||||
::= { charSessEntry 9 }
|
||||
|
||||
charSessStartTime OBJECT-TYPE
|
||||
SYNTAX TimeTicks
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of sysUpTime in MIB-2 when the session
|
||||
entered connecting state."
|
||||
::= { charSessEntry 10 }
|
||||
|
||||
-- conformance information
|
||||
|
||||
charConformance OBJECT IDENTIFIER ::= { char 5 }
|
||||
|
||||
charGroups OBJECT IDENTIFIER ::= { charConformance 1 }
|
||||
charCompliances OBJECT IDENTIFIER ::= { charConformance 2 }
|
||||
|
||||
-- compliance statements
|
||||
|
||||
charCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for SNMPv2 entities
|
||||
which have Character hardware interfaces."
|
||||
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS { charGroup }
|
||||
::= { charCompliances 1 }
|
||||
|
||||
-- units of conformance
|
||||
|
||||
charGroup OBJECT-GROUP
|
||||
OBJECTS { charNumber, charPortIndex, charPortName,
|
||||
charPortType, charPortHardware, charPortReset,
|
||||
charPortAdminStatus, charPortOperStatus,
|
||||
charPortLastChange,
|
||||
charPortInFlowState, charPortOutFlowState,
|
||||
charPortAdminOrigin, charPortSessionMaximum,
|
||||
charPortInFlowTypes, charPortOutFlowTypes,
|
||||
charPortInCharacters, charPortOutCharacters,
|
||||
charPortSessionNumber, charPortSessionIndex,
|
||||
charPortLowerIfIndex,
|
||||
charSessPortIndex, charSessIndex,
|
||||
charSessKill, charSessState,
|
||||
charSessProtocol, charSessOperOrigin,
|
||||
charSessInCharacters, charSessOutCharacters,
|
||||
charSessConnectionId, charSessStartTime }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects providing information
|
||||
applicable to all Character interfaces."
|
||||
::= { charGroups 1 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user