WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

456
mibs/qtech/QTECH-VLAN-MIB Normal file
View File

@ -0,0 +1,456 @@
-- *****************************************************************
-- QTECH-VLAN-MIB.mib: Qtech VLAN MIB file
--
-- March 2002, Wuzg
--
-- Copyright (c) 2002 by Qtech Networks Co.,Ltd.
-- All rights reserved.
--
-- *****************************************************************
--
QTECH-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
VlanId,
PortList
FROM Q-BRIDGE-MIB
DisplayString,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ConfigStatus,
MemberMap,
IfIndex
FROM QTECH-TC
qtechMgmt
FROM QTECH-SMI;
qtechVlanMIB MODULE-IDENTITY
LAST-UPDATED "200203200000Z"
ORGANIZATION "Qtech Networks Co.,Ltd."
CONTACT-INFO
"
Tel: 4008-111-000
E-mail: service@qtech.com.cn"
DESCRIPTION
"This module defines qtech vlan mibs."
REVISION "200203200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { qtechMgmt 9}
qtechVlanMIBObjects OBJECT IDENTIFIER ::= { qtechVlanMIB 1 }
VlanList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 1 through
8, the second octet specifying vlans 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered vlan, and the least significant bit
represents the highest numbered vlan. Thus, each vlan
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1',
then that vlan is included in the set of vlans; the vlan
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
qtechVlanMaxNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MAX vlans this system supported."
::= { qtechVlanMIBObjects 1 }
qtechVlanCurrentNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current vlans this system have."
::= { qtechVlanMIBObjects 2 }
qtechSystemMaxVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max vlans of VID this system supported."
::= { qtechVlanMIBObjects 3 }
-- qtechVlanIfConfigTable from the 10.3(4b3) has been abandoned.
qtechVlanIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechVlanIfConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vlan table."
::= { qtechVlanMIBObjects 4 }
qtechVlanIfConfigEntry OBJECT-TYPE
SYNTAX QtechVlanIfConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"list of vlan and it's port group table."
INDEX { qtechVlanIfConfigIfIndex}
::= { qtechVlanIfConfigTable 1 }
QtechVlanIfConfigEntry ::=
SEQUENCE {
qtechVlanIfConfigIfIndex IfIndex,
qtechVlanIfAccessVlan VlanId,
qtechVlanIfNativeVlan VlanId,
qtechVlanIfAllowedVlanList OCTET STRING
}
qtechVlanIfConfigIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
" "
::= { qtechVlanIfConfigEntry 1 }
qtechVlanIfAccessVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value indicate the VID of the vlan which that this port
belong to. This field is effective for only access port."
::= { qtechVlanIfConfigEntry 2 }
qtechVlanIfNativeVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value indicate the VID of the native vlan of that this port .
This field is effective for only trunk port."
::= { qtechVlanIfConfigEntry 3 }
qtechVlanIfAllowedVlanList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(512))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Each bit in every octet in octet string assigned to a vlan, the value of
the bit indicates that if the vlan is belong to allowed vlan list of this
interface. It indicates that assigned vlan is member of allowed vlan list
of this interface if value of the bit is 1. The lowest bit of first byte
correspond to vlan 1 and the lowest bit of second byte correspond to vlan 9
vlan. This field is effective for only trunk port."
::= { qtechVlanIfConfigEntry 4 }
-- qtechVlanTable from the 10.3(4b3) has been abandoned.
qtechVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechVlanEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vlan table."
::= { qtechVlanMIBObjects 5 }
qtechVlanEntry OBJECT-TYPE
SYNTAX QtechVlanEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"list of vlan and it's distribution table."
INDEX { qtechVlanVID }
::= { qtechVlanTable 1 }
QtechVlanEntry ::=
SEQUENCE {
qtechVlanVID VlanId,
qtechVlanPortMemberAction MemberMap,
qtechVlanApMemberAction MemberMap,
qtechVlanAlias DisplayString,
qtechVlanEntryStatus ConfigStatus
}
qtechVlanVID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"VID of vlan ."
::= { qtechVlanEntry 1 }
qtechVlanPortMemberAction OBJECT-TYPE
SYNTAX MemberMap
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Each octet in member map assigned to a physical port, the value of
the octect indicates the action of a physical port in the
vlan. Drop(1) indicate that the vlan doesn't include this physical port,
Add(2) indicate that the vlan include this physical port."
::= { qtechVlanEntry 2 }
qtechVlanApMemberAction OBJECT-TYPE
SYNTAX MemberMap
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Each octet in member map assigned to a aggreate port, the value of
the octect indicates the action of a aggreate port in the
vlan. Drop(1) indicate that the vlan doesn't include this physical port,
Add(2) indicate that the vlan include this physical port."
::= { qtechVlanEntry 3 }
qtechVlanAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Vlan's alias ."
DEFVAL{""}
::= { qtechVlanEntry 4 }
qtechVlanEntryStatus OBJECT-TYPE
SYNTAX ConfigStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Status of this entry, set this object to valid will creat a vlan of this entry,
and set its value to invalid will delete the vlan of this entry."
::= { qtechVlanEntry 5 }
-- qtechVlanPortConfigTable from the 10.3(4b3) was started to support.
--The table of VLAN members
qtechVlanPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechVlanPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN members."
::= { qtechVlanMIBObjects 6 }
qtechVlanPortConfigEntry OBJECT-TYPE
SYNTAX QtechVlanPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of ports."
INDEX { qtechVlanPortConfigIndex}
::= { qtechVlanPortConfigTable 1 }
QtechVlanPortConfigEntry ::=
SEQUENCE {
qtechVlanPortConfigIndex IfIndex,
qtechVlanPortConfigMode INTEGER,
qtechVlanPortAccessVlan VlanId,
qtechVlanPortNativeVlan VlanId,
qtechVlanPortAllowedVlanList VlanList,
qtechIfVlanID Integer32
}
--the index of port
qtechVlanPortConfigIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port index"
::= { qtechVlanPortConfigEntry 1 }
--The port mode, read-only, in QTECH-INTERFACE-MIB.mib can be set up.
qtechVlanPortConfigMode OBJECT-TYPE
SYNTAX INTEGER {
access(1), -- the mode of interface is access port
trunk(2), -- the mode of interface is trunk port
dot1q-tunnel(3), -- the mode of interface is 802.1q tunnel port
hybrid(4), -- the mode of interface is hybrid port
other(5), -- the mode of interface is unknow port
uplink(6), -- the mode of interface is uplink port
host(7), -- the mode of interface is private host port
promiscuous(8) -- the mode of interface is private promiscuous port
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port mode, indicates that port is an
access(1), trunk(2), dot1q-tunnel(3),
hybrid(4), other(5), uplink(6),
host(7) or promiscuous(8) port."
::= { qtechVlanPortConfigEntry 2 }
qtechVlanPortAccessVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value indicate the VID of the vlan which that this port
belong to. This field is effective for only access port."
::= { qtechVlanPortConfigEntry 3 }
qtechVlanPortNativeVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value indicate the VID of the native vlan of that this port .
This field is effective for only trunk,hybrid,uplink and dot1q_tunnel port."
::= { qtechVlanPortConfigEntry 4 }
qtechVlanPortAllowedVlanList OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 0 through
7, the second octet specifying vlans 8 through 15, etc.
Within each octet, the most significant bit represents
the lowest numbered vlan, and the least significant bit
represents the highest numbered vlan. Thus, each vlan
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1',
then that vlan is included in the set of vlans; the vlan
is not included if its bit has a value of '0'"
::= { qtechVlanPortConfigEntry 5 }
qtechIfVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value indicates the VID of the vlan which that this port
belong to or of the native vlan of this port.
This field is effective for only access, trunk,
hybrid, uplink and dot1q_tunnel port."
::= { qtechVlanPortConfigEntry 6 }
-- qtechVlanConfigTable from the 10.3(4b3) was started to support.
qtechVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vlan table."
::= { qtechVlanMIBObjects 7 }
qtechVlanConfigEntry OBJECT-TYPE
SYNTAX QtechVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of vlan and it's distribution table."
INDEX { qtechVlanConfigVID }
::= { qtechVlanConfigTable 1 }
QtechVlanConfigEntry ::=
SEQUENCE {
qtechVlanConfigVID VlanId,
qtechVlanConfigAction Integer32,
qtechVlanConfigName DisplayString,
qtechVlanConfigPortMember PortList
}
qtechVlanConfigVID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VID of vlan ."
::= { qtechVlanConfigEntry 1 }
qtechVlanConfigAction OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value 1 to create a vlan, 0 to delete a vlan."
::= { qtechVlanConfigEntry 2 }
qtechVlanConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"vlan name."
::= { qtechVlanConfigEntry 3 }
qtechVlanConfigPortMember OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1',
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
::= { qtechVlanConfigEntry 4 }
qtechVlanMIBConformance OBJECT IDENTIFIER ::= { qtechVlanMIB 2 }
qtechVlanMIBCompliances OBJECT IDENTIFIER ::= { qtechVlanMIBConformance 1 }
qtechVlanMIBGroups OBJECT IDENTIFIER ::= { qtechVlanMIBConformance 2 }
-- compliance statements
qtechVlanMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Qtech Vlan MIB"
MODULE -- this module
MANDATORY-GROUPS { qtechVlanMIBGroup
}
::= { qtechVlanMIBCompliances 1 }
-- units of conformance
qtechVlanMIBGroup OBJECT-GROUP
OBJECTS {
qtechVlanMaxNumber,
qtechVlanCurrentNumber,
qtechSystemMaxVID,
-- qtechVlanIfConfigIfIndex,
qtechVlanIfAccessVlan,
qtechVlanIfNativeVlan,
qtechVlanIfAllowedVlanList,
qtechVlanVID,
qtechVlanApMemberAction,
qtechVlanPortMemberAction,
qtechVlanAlias,
qtechVlanEntryStatus,
-- qtechManageVlanVID,
-- qtechPortDefaultVIDPortIndex,
-- qtechPortDefaultVID,
-- qtechVlanPortConfigIndex,
qtechVlanPortConfigMode,
qtechVlanPortAccessVlan,
qtechVlanPortNativeVlan,
qtechVlanPortAllowedVlanList,
qtechIfVlanID,
qtechVlanConfigVID,
qtechVlanConfigAction,
qtechVlanConfigName,
qtechVlanConfigPortMember
}
STATUS current
DESCRIPTION
"A collection of objects providing vlan configure ."
::= { qtechVlanMIBGroups 1 }
END