WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

587
mibs/qtech/QTECH-PRIVATE-VLAN-MIB Normal file
View File

@ -0,0 +1,587 @@
-- *****************************************************************
-- QTECH-PRIVATE-VLAN-MIB
--
-- March 2009, linjia
--
-- Copyright (c) 2009 by Qtech Networks Co.,Ltd.
-- All rights reserved.
--
-- *****************************************************************
QTECH-PRIVATE-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
qtechMgmt
FROM QTECH-SMI
ifIndex
FROM IF-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF;
qtechPrivateVlanMIB MODULE-IDENTITY
LAST-UPDATED "200903230000Z"
ORGANIZATION "Qtech Networks Co.,Ltd."
CONTACT-INFO
"
Tel: 4008-111-000
E-mail: service@qtech.com.cn"
DESCRIPTION
"The MIB module to support Private VLAN feature on switching devices."
REVISION "200903010000Z"
DESCRIPTION
" The Initial version of this MIB module."
::= { qtechMgmt 44 }
--
-- Textual Conventions
--
PrivateVlanType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The VLAN type as defined for Private VLAN feature.
'normal' -- this VLAN is a normal VLAN (i.e., not a
private VLAN or private group).
'primary' -- this VLAN is the primary VLAN as defined for
Private VLAN feature.
'isolated' -- this VLAN is the isolated VLAN as
defined for Private VLAN feature. All the
ports in the isolated VLAN can only talk
to the specifically designated ports
configured as promiscuous ports, i.e.,
the ports even in the same isolated VLAN
can not talk to each other.
'community' -- this VLAN is the community VLAN as
defined for Private VLAN feature. All the
ports in this community VLAN can behave
like ports in normal VLAN type except
that they can also receive egress packets
tagged with its associated primary VLAN
ID.
A VLAN of isolated(3), community(4) type is also called a secondary VLAN."
SYNTAX INTEGER {
normal(1),
primary(2),
isolated(3),
community(4)
}
VlanIndexOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The VLAN ID or zero as defined for Private VLAN
feature. If the value is between 1 and 4095
inclusive, it represents an IEEE 802.1Q VLAN-ID.
If the value is zero, it is object-specific and
must therefore be defined as part of the
description of any object which uses this syntax."
SYNTAX INTEGER(0..4095)
--VlanIndexBitmap ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "A string of octets containing one bit per VLAN for a
-- total of 1024 VLANs in the management domain.
-- The most significant bit of the octet string is the
-- lowest value VLAN of 1024 VLANs.
--
-- Refer to the description on the MIB object that
-- uses this textual convention to determine the meaning
-- of bits that are set ('1') or cleared ('0').
-- The most significant bit of the bitmap is transmitted
-- first. Note that if the length of this string is less than
-- 128 octets, any 'missing' octets are assumed to contain
-- the value zero. An NMS may omit any zero-valued octets
-- from the end of this string in order to reduce SetPDU
-- size, and the agent may also omit zero-valued trailing
-- octets, to reduce the size of GetResponse PDUs."
-- SYNTAX OCTET STRING (SIZE (0..128))
qtechpvlanMIBObjects OBJECT IDENTIFIER ::= { qtechPrivateVlanMIB 1 }
qtechpvlanVlanObjects OBJECT IDENTIFIER ::= { qtechpvlanMIBObjects 1 }
qtechpvlanPortObjects OBJECT IDENTIFIER ::= { qtechpvlanMIBObjects 2 }
qtechpvlanSVIObjects OBJECT IDENTIFIER ::= { qtechpvlanMIBObjects 3 }
--
-- VLAN tables for Private VLAN feature
--
qtechpvlanVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechPvlanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing Private VLAN information on the
VLANs which currently exist."
::= { qtechpvlanVlanObjects 1 }
qtechpvlanVlanEntry OBJECT-TYPE
SYNTAX QtechPvlanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the Private VLAN
information on the VLANs for a particular management
domain."
INDEX { qtechpvlanVlanIndex}
::= { qtechpvlanVlanTable 1 }
QtechPvlanVlanEntry ::= SEQUENCE {
qtechpvlanVlanIndex VlanIndexOrZero,
qtechpvlanVlanPrivateVlanType PrivateVlanType,
qtechpvlanVlanAssociatedPrimaryVlan VlanIndexOrZero,
qtechpvlanIfAssociatedPrimaryVlan TruthValue
}
qtechpvlanVlanIndex OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicated the VLAN id."
::= { qtechpvlanVlanEntry 1 }
qtechpvlanVlanPrivateVlanType OBJECT-TYPE
SYNTAX PrivateVlanType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicated the VLAN type as defined for Private VLAN
feature."
::= { qtechpvlanVlanEntry 2 }
qtechpvlanVlanAssociatedPrimaryVlan OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The VLAN ID of The associated primary VLAN used for
the Private VLAN feature if pvlanVlanPrivateVlanType
has the value of isolated(3), community(4). If pvlanVlanPrivateVlanType
has the value of normal(1) or primary(2), then this
object has the value of 0.
The value should be 0 when configuring 'private-vlan type'.
When configuring 'private-vlan association',the value of 0 means deleting the association, otherwise means
configure association on this primary vlan."
::= { qtechpvlanVlanEntry 3 }
qtechpvlanIfAssociatedPrimaryVlan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "It indicate if the vlan assiociate with primary vlan when get the mib, and
indicate if setting the assiociate with primary vlan when set the mib, 0 means
configure 'private-vlan type', not 0 means configure 'private-vlan association'."
::= { qtechpvlanVlanEntry 4 }
--
-- Table for configuring host-association on host ports
--
qtechpvlanPrivatePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechPvlanPrivatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing information of the configuration of
VLAN on the host ports of the device."
::= { qtechpvlanPortObjects 1 }
qtechpvlanPrivatePortEntry OBJECT-TYPE
SYNTAX QtechPvlanPrivatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing information of the
configuration of VLAN for each host port.
When pvlanPrivatePortSecondaryVlan and pvlanPrivatePortPrimaryVlan
are both zero, it means deleting the configuration on the port, when they
are both nonzero, it means configuring the host port,
otherwise are invalid input. This table is valid only for host port."
INDEX { ifIndex }
::= { qtechpvlanPrivatePortTable 1 }
QtechPvlanPrivatePortEntry ::= SEQUENCE {
qtechpvlanPrivatePortPrimaryVlan VlanIndexOrZero,
qtechpvlanPrivatePortSecondaryVlan VlanIndexOrZero
}
qtechpvlanPrivatePortPrimaryVlan OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of the primary VLAN configured on this
private port. If qtechpvlanPrivatePortPrimaryVlan and qtechpvlanPrivatePortSecondaryVlan
are both zero when set the mib, it means delete the private-vlan configuration on the host port."
::= { qtechpvlanPrivatePortEntry 1 }
qtechpvlanPrivatePortSecondaryVlan OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of the secondary VLAN configured on this
private port.If qtechpvlanPrivatePortPrimaryVlan and qtechpvlanPrivatePortSecondaryVlan
are both zero when set the mib, it means delete the private-vlan configuration on the host port."
::= { qtechpvlanPrivatePortEntry 2 }
--
-- Table for remapping secondary VLAN to primary VLAN on promiscuous
-- ports for Private VLAN feature
--
qtechpvlanPromPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechPvlanPromPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing information of secondary VLAN to
primary VLAN remapping on ports of the device."
::= { qtechpvlanPortObjects 2 }
qtechpvlanPromPortEntry OBJECT-TYPE
SYNTAX QtechPvlanPromPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing information of secondary
VLAN to primary VLAN remapping for each port. An entry
is created by the managed system for each interface
which can be configured as a promiscuous port for
Private VLAN feature.This table is valid only for promiscuous port."
INDEX { ifIndex }
::= { qtechpvlanPromPortTable 1 }
QtechPvlanPromPortEntry ::= SEQUENCE {
qtechpvlanPrivatePortPrimaryVlanId VlanIndexOrZero,
qtechpvlanPromPortSecondaryRemap OCTET STRING,
qtechpvlanPromPortSecondaryRemap2k OCTET STRING,
qtechpvlanPromPortSecondaryRemap3k OCTET STRING,
qtechpvlanPromPortSecondaryRemap4k OCTET STRING
}
qtechpvlanPrivatePortPrimaryVlanId OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Primary Vlan Id configured on the promiscuous port, it is zero
when delete the remapping on the port."
::= { qtechpvlanPromPortEntry 1 }
qtechpvlanPromPortSecondaryRemap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN in the
management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 0
through 7; the second octet to VLANs 8 through 15; etc.
The most significant bit of each octet corresponds to
the lowest value VlanIndexOrZero in that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated,
community type which has already
been associated with a primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs."
::= { qtechpvlanPromPortEntry 2 }
qtechpvlanPromPortSecondaryRemap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 1024 through 2047
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 1024
through 1031; the second octet to VLANs 1032 through
1039; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated or
community type which has already been associated with a
primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { qtechpvlanPromPortEntry 3 }
qtechpvlanPromPortSecondaryRemap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 2048 through 3071
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 2048
through 2055; the second octet to VLANs 2056 through
2063; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated or
community type which has already been associated with a
primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { qtechpvlanPromPortEntry 4 }
qtechpvlanPromPortSecondaryRemap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 3072 through 4095
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 3072
through 3079; the second octet to VLANs 3080 through
3087; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated or
community type which has already been associated with a
primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { qtechpvlanPromPortEntry 5 }
--
-- Table for configuring port mode for Private VLAN feature
--
qtechpvlanPortModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechPvlanPortModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing information of the configuration of
port mode for the Private VLAN feature."
::= { qtechpvlanPortObjects 3 }
qtechpvlanPortModeEntry OBJECT-TYPE
SYNTAX QtechPvlanPortModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing information of the
configuration of port mode on each port for the
Private VLAN feature. An entry of this table is
created by the managed system when the capability
to be a Private VLAN port is detected on an
interface."
INDEX { ifIndex }
::= { qtechpvlanPortModeTable 1 }
QtechPvlanPortModeEntry ::= SEQUENCE {
qtechpvlanPortMode INTEGER
}
qtechpvlanPortMode OBJECT-TYPE
SYNTAX INTEGER {
nonPrivateVlan(1),
host(2),
promiscuous(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Private VLAN port mode on this port.
nonPrivateVlan(1) -- this port is configured to be a
non-Private-VLAN port.
host(2) -- this port is configured to be
a Private-VLAN host port, i.e., private
port.
promiscuous(3) -- this port is configured to be
a Private-VLAN promiscuous port."
::= { qtechpvlanPortModeEntry 1 }
--
-- Private VLAN mapping for the Switch Virtual Interfaces
--
qtechpvlanSVIMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechPvlanSVIMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the configuration of
primary VLAN SVI (Switch Virtual Interfaces)
mapping for the secondary VLANs for the Private
VLAN feature."
::= { qtechpvlanSVIObjects 1 }
qtechpvlanSVIMappingEntry OBJECT-TYPE
SYNTAX QtechPvlanSVIMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the Primary VLAN
SVI mapping configuration for the existing
secondary VLANs. An entry is created by the managed
system for each VLAN with corresponding VLAN's
pvlanVlanPrivateVlanType of isolated(3), community(4)."
INDEX { qtechpvlanSVIMappingVlanIndex }
::= { qtechpvlanSVIMappingTable 1 }
QtechPvlanSVIMappingEntry ::= SEQUENCE {
qtechpvlanSVIMappingVlanIndex VlanIndexOrZero,
qtechpvlanSVIMappingPrimarySVI VlanIndexOrZero
}
qtechpvlanSVIMappingVlanIndex OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index value that uniquely identifies the
Virtual LAN associated with this information."
::= { qtechpvlanSVIMappingEntry 1 }
qtechpvlanSVIMappingPrimarySVI OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Vlan ID of the primary VLAN SVI this secondary
VLAN is mapped to for the Private VLAN feature.
This object has the value of zero if this secondary
VLAN is not mapped to any primary VLAN SVI."
::= { qtechpvlanSVIMappingEntry 2 }
--
-- Conformance Information
--
qtechpvlanMIBConformance OBJECT IDENTIFIER ::= { qtechPrivateVlanMIB 2 }
qtechpvlanMIBCompliances OBJECT IDENTIFIER ::= { qtechpvlanMIBConformance 1 }
qtechpvlanMIBGroups OBJECT IDENTIFIER ::= { qtechpvlanMIBConformance 2}
--
-- compliance statements
--
qtechpvlanMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for Private VLAN feature
implementation."
MODULE -- this module
-- no MANDATORY-GROUPS
GROUP qtechpvlanVlanGroup
DESCRIPTION "This group must be implemented on devices which has
Private VLAN feature support."
GROUP qtechpvlanPrivatePortGroup
DESCRIPTION "This group must be implemented on devices which has
Private VLAN feature support."
GROUP qtechpvlanPromPortGroup
DESCRIPTION "This group must be implemented on devices which has
support for promiscuous port of Private VLAN feature."
GROUP qtechpvlanPortModeGroup
DESCRIPTION "A collection of objects providing basic
port mode configuration for Private VLAN feature."
GROUP qtechpvlanSVIGroup
DESCRIPTION "A collection of objects providing
svi mapping configuration for Private VLAN feature."
::= { qtechpvlanMIBCompliances 1 }
--
-- units of conformance
--
qtechpvlanVlanGroup OBJECT-GROUP
OBJECTS {
qtechpvlanVlanIndex,
qtechpvlanVlanPrivateVlanType,
qtechpvlanVlanAssociatedPrimaryVlan,
qtechpvlanIfAssociatedPrimaryVlan
}
STATUS current
DESCRIPTION "A collection of objects providing basic VLAN
configuration for Private VLAN feature."
::= { qtechpvlanMIBGroups 1 }
qtechpvlanPrivatePortGroup OBJECT-GROUP
OBJECTS {
qtechpvlanPrivatePortPrimaryVlan,
qtechpvlanPrivatePortSecondaryVlan
}
STATUS current
DESCRIPTION "A collection of objects providing basic
private port configuration for Private VLAN
feature."
::= { qtechpvlanMIBGroups 2 }
qtechpvlanPromPortGroup OBJECT-GROUP
OBJECTS {
qtechpvlanPrivatePortPrimaryVlan,
qtechpvlanPromPortSecondaryRemap,
qtechpvlanPromPortSecondaryRemap2k,
qtechpvlanPromPortSecondaryRemap3k,
qtechpvlanPromPortSecondaryRemap4k
}
STATUS current
DESCRIPTION "A collection of objects providing basic
promiscuous port configuration for Private
VLAN feature."
::= { qtechpvlanMIBGroups 3 }
qtechpvlanPortModeGroup OBJECT-GROUP
OBJECTS {
qtechpvlanPortMode
}
STATUS current
DESCRIPTION "A collection of objects providing basic
port mode configuration for Private VLAN feature."
::= { qtechpvlanMIBGroups 4 }
qtechpvlanSVIGroup OBJECT-GROUP
OBJECTS {
qtechpvlanSVIMappingPrimarySVI
}
STATUS current
DESCRIPTION "A collection of objects providing
svi mapping configuration for Private VLAN feature."
::= { qtechpvlanMIBGroups 5 }
END