initial commit; version 22.5.12042

2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
--- a/mibs/paradyne/PDN-MPE-ARP-MIB
+++ b/mibs/paradyne/PDN-MPE-ARP-MIB
@ -0,0 +1,119 @@
+PDN-MPE-ARP-MIB DEFINITIONS ::= BEGIN
+
+-- Version :  0.1 DRAFT
+-- Enterprise pdn ARP mib (mpe support)
+-- Copyright (C) 2000 Paradyne Corporation.
+
+-- Created by : Wayne Jadoo / Prakash Easwar
+
+-- This MIB contains objects that is used configure
+-- ARP Entries and display ARP information on a Device
+
+IMPORTS
+SwitchState,
+VnidRange
+FROM PDN-TC
+MacAddress, TruthValue,
+RowStatus
+FROM SNMPv2-TC
+OBJECT-TYPE
+FROM RFC-1212
+IpAddress
+FROM RFC1155-SMI
+entPhysicalIndex
+FROM ENTITY-MIB
+mpe-arp
+FROM PDN-HEADER-MIB
+;
+
+
+-- Bit32 is temporarily defined here to get mpe_Arp.mib to compile.
+-- A textual convention is being defined for bit32, but needs 
+-- to be approved by the mibwg. Until this has been completed
+-- a temporary defintion is used here in order to get this mib
+-- to compile to be proposed.
+
+Bit32 ::= INTEGER 
+
+mpePdnNetToMediaGenericMIBObjects  OBJECT IDENTIFIER ::= { mpe-arp 1 }
+mpePdnNetToMediaMIBTraps OBJECT IDENTIFIER ::= { mpe-arp 2 }
+mpePdnNetTo8023MediaParams OBJECT IDENTIFIER ::= { mpePdnNetToMediaGenericMIBObjects 1 }
+mpePdnNetTo8023MediaConfig OBJECT IDENTIFIER ::= { mpePdnNetToMediaGenericMIBObjects 2 }
+
+
+-- The ARP Parameters Configuration Table 802.3 media cards.
+
+          mpePdnNetTo8023MediaParamsTable OBJECT-TYPE
+              SYNTAX  SEQUENCE OF MpePdnNetTo8023MediaParamsEntry
+              ACCESS  not-accessible
+              STATUS  mandatory
+              DESCRIPTION
+                "A table that contains ARP Parameters  configuration information ."
+              ::= { mpePdnNetTo8023MediaParams 1 }
+
+          mpePdnNetTo8023MediaParamsEntry OBJECT-TYPE
+              SYNTAX  MpePdnNetTo8023MediaParamsEntry
+              ACCESS  not-accessible
+              STATUS  mandatory
+              DESCRIPTION
+                      "A list of information about ARP Parameters."
+              INDEX  { entPhysicalIndex }
+              ::= { mpePdnNetTo8023MediaParamsTable 1 }
+
+
+          MpePdnNetTo8023MediaParamsEntry ::=
+              SEQUENCE {
+                mpePdnNetTo8023MediaParamsCompEntryTimeout        INTEGER,
+                mpePdnNetTo8023MediaParamsIncompEntryTimeout      INTEGER,
+                mpePdnNetTo8023MediaParamsDefRouteEntryTimeout    INTEGER
+              }
+
+          mpePdnNetTo8023MediaParamsCompEntryTimeout OBJECT-TYPE
+              SYNTAX  INTEGER
+              ACCESS  read-write
+              STATUS  mandatory
+              DESCRIPTION
+                      " Complete Entry Timeout is the length of time that 
+                        a complete entry remains in the ARP table before 
+                        removal.  A complete entry is one for which there is 
+                        a MAC address -- i.e. a node has responded to the
+                        ARP request. If an entry gets this old without being 
+                        referenced, it will be removed from the table.  The 
+                        range for this parameter is 1  to 200000 minutes."
+              DEFVAL { 20 }
+              ::= { mpePdnNetTo8023MediaParamsEntry 1 }
+
+          mpePdnNetTo8023MediaParamsIncompEntryTimeout OBJECT-TYPE
+              SYNTAX   INTEGER 
+              ACCESS   read-write
+              STATUS   mandatory
+              DESCRIPTION
+                      " Incomplete Entry Timeout is the length of time that 
+                        an incomplete entry remains in the ARP table before 
+                        removal. An incomplete entry is one for which there 
+                        is no MAC address -- i.e. an ARP request has been made,
+                        but no response has been received. This is also the 
+                        amount of time that a packet will remain in the system 
+                        while waiting for address resolution. The range 
+                        for this parameter is  1 to  255  minutes."
+              DEFVAL { 3 }
+              ::= { mpePdnNetTo8023MediaParamsEntry 2 }
+        
+          mpePdnNetTo8023MediaParamsDefRouteEntryTimeout OBJECT-TYPE
+              SYNTAX   INTEGER 
+              ACCESS   read-write
+              STATUS   mandatory
+              DESCRIPTION
+                      "Default Route Entry Timeout is the length of time 
+                       a default route entry will remain in the ARP table. 
+                       If default route gets this old without being referenced,
+                       an ARP request will be sent to the next hop router.
+                       If no response is received, it will be removed from 
+                       the ARP table and the card will switch to the next 
+                       reachable default route with the highest preference. 
+                       The range for this parameter is 1  to  20  minutes."
+              DEFVAL { 1 }
+              ::= { mpePdnNetTo8023MediaParamsEntry 3 }
+
+          END
+