initial commit; version 22.5.12042
This commit is contained in:
895
mibs/nortel/NTN-QOS-POLICY-EXT-PIB
Normal file
895
mibs/nortel/NTN-QOS-POLICY-EXT-PIB
Normal file
@ -0,0 +1,895 @@
|
||||
|
||||
NTN-QOS-POLICY-EXT-PIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE
|
||||
FROM SNMPv2-SMI
|
||||
MODULE-COMPLIANCE, OBJECT-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
TruthValue, TEXTUAL-CONVENTION,
|
||||
RowStatus, StorageType
|
||||
FROM SNMPv2-TC
|
||||
PolicyInstanceId, RoleCombination
|
||||
FROM POLICY-FRAMEWORK-PIB
|
||||
QosInterfaceQueueCount, qosActionEntry,
|
||||
qosInterfaceTypeEntry
|
||||
FROM QOS-POLICY-IP-PIB
|
||||
QosIeee802Cos, qos802DscpMappingEntry,
|
||||
qos802AceEntry
|
||||
FROM QOS-POLICY-802-PIB
|
||||
policy
|
||||
FROM SYNOPTICS-ROOT-MIB;
|
||||
|
||||
ntnQosPolicyExtPib MODULE-IDENTITY
|
||||
LAST-UPDATED "200407200000Z" -- July 20, 2004
|
||||
ORGANIZATION "Nortel Networks, Inc."
|
||||
CONTACT-INFO "
|
||||
John Seligson
|
||||
Nortel Networks, Inc.
|
||||
4401 Great America Parkway
|
||||
Santa Clara, CA 95054 USA
|
||||
Phone: +1 408 495 2992
|
||||
Email: jseligso@nortelnetworks.com"
|
||||
DESCRIPTION
|
||||
"The Nortel Network's PIB module containing
|
||||
extensions to the base PIB modules (Framework,
|
||||
IP QoS, 802 QoS) produced by the IETF."
|
||||
|
||||
REVISION "200407200000Z" -- 20 July 2004
|
||||
DESCRIPTION "Version 3: Added version info"
|
||||
|
||||
::= { policy 4 }
|
||||
|
||||
ntnQosPolicyExtPibClasses
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPib 1 }
|
||||
|
||||
--
|
||||
-- Textual Conventions
|
||||
--
|
||||
|
||||
--
|
||||
-- Drop Precedence
|
||||
--
|
||||
|
||||
DropPrecedence ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An integer that indicates the drop precedence value.
|
||||
Traffic associated with a lower drop precedence is
|
||||
generally given priority over traffic with a higher
|
||||
drop precedence during resource allocation."
|
||||
|
||||
SYNTAX INTEGER (1..8)
|
||||
|
||||
--
|
||||
-- The Nortel Networks QoS Interface Extensions Group
|
||||
--
|
||||
|
||||
ntnQosIfParametersExt
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPibClasses 1 }
|
||||
|
||||
--
|
||||
-- Nortel Networks 802.1D User Priority Assignment Table
|
||||
--
|
||||
-- Supports the assignment of 802.1D user priority (Pri)
|
||||
-- values to queues for each interface type.
|
||||
--
|
||||
|
||||
ntnQosIfPriAssignmentTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF NtnQosIfPriAssignmentEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Supports the assignment of 802.1D user priority
|
||||
values to a queue for each interface with a specific
|
||||
role combination. There will be 8 instances of this
|
||||
class for each supported role combination."
|
||||
|
||||
::= { ntnQosIfParametersExt 1 }
|
||||
|
||||
ntnQosIfPriAssignmentEntry OBJECT-TYPE
|
||||
SYNTAX NtnQosIfPriAssignmentEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An instance of the ntnQosIfPriAssignment class."
|
||||
|
||||
INDEX { ntnQosIfPriAssignmentId }
|
||||
::= { ntnQosIfPriAssignmentTable 1 }
|
||||
|
||||
NtnQosIfPriAssignmentEntry ::= SEQUENCE {
|
||||
ntnQosIfPriAssignmentId PolicyInstanceId,
|
||||
ntnQosIfPriAssignmentRoles RoleCombination,
|
||||
ntnQosIfPriAssignmentPri QosIeee802Cos,
|
||||
ntnQosIfPriAssignmentQueue QosInterfaceQueueCount,
|
||||
ntnQosIfPriAssignmentStorageType StorageType,
|
||||
ntnQosIfPriAssignmentStatus RowStatus
|
||||
}
|
||||
|
||||
ntnQosIfPriAssignmentId OBJECT-TYPE
|
||||
SYNTAX PolicyInstanceId
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An index that is used to uniquely identify the
|
||||
instance of the ntnQosIfPriAssignment class."
|
||||
|
||||
::= { ntnQosIfPriAssignmentEntry 1 }
|
||||
|
||||
ntnQosIfPriAssignmentRoles OBJECT-TYPE
|
||||
SYNTAX RoleCombination
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The role combination with which an interface must be
|
||||
configured to support the Pri-to-queue assignment
|
||||
described by this instance. The specified role
|
||||
combination must be defined in the qosInterfaceType
|
||||
table prior to being referenced by this entry.
|
||||
Otherwise a 'priAssociationUnknown(3)' error code
|
||||
will be returned."
|
||||
|
||||
::= { ntnQosIfPriAssignmentEntry 2 }
|
||||
|
||||
ntnQosIfPriAssignmentPri OBJECT-TYPE
|
||||
SYNTAX QosIeee802Cos
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The 802.1D user priority to which this class
|
||||
instance applies."
|
||||
|
||||
::= { ntnQosIfPriAssignmentEntry 3 }
|
||||
|
||||
ntnQosIfPriAssignmentQueue OBJECT-TYPE
|
||||
SYNTAX QosInterfaceQueueCount
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The specific queue, within the queue set that is
|
||||
associated with the interface set identified by the
|
||||
ntnQosIfPriAssignmentRoles tag, on which traffic
|
||||
with the specified user priority, dictated by the
|
||||
ntnQosIfPriAssignmentPri value, is placed. Failure
|
||||
to specify an appropriate queue results in a
|
||||
'priAssociationConflict(4)' error indication being
|
||||
returned."
|
||||
|
||||
::= { ntnQosIfPriAssignmentEntry 4 }
|
||||
|
||||
ntnQosIfPriAssignmentStorageType OBJECT-TYPE
|
||||
SYNTAX StorageType
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The storage type for this conceptual row.
|
||||
|
||||
Conceptual rows having the value permanent(4) need not
|
||||
allow write-access to any columnar objects in the row.
|
||||
|
||||
This object may not be modified if the associated
|
||||
ntnQosIfPriAssignmentStatus object is equal to active(1)."
|
||||
|
||||
DEFVAL { volatile }
|
||||
::= { ntnQosIfPriAssignmentEntry 5 }
|
||||
|
||||
ntnQosIfPriAssignmentStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of this row.
|
||||
|
||||
An entry may not exist in the active state unless all
|
||||
objects in the entry have an appropriate value. Row
|
||||
creation using only default values is supported."
|
||||
|
||||
::= { ntnQosIfPriAssignmentEntry 6 }
|
||||
|
||||
--
|
||||
-- Nortel Networks Interface Type Extension Table
|
||||
--
|
||||
-- Supports augmenting the information regarding the
|
||||
-- interface roles and queue set assignment.
|
||||
--
|
||||
|
||||
ntnQosInterfaceTypeExtTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF NtnQosInterfaceTypeExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Supports augmenting the information regarding
|
||||
the interface roles and queue set assignments."
|
||||
|
||||
::= { ntnQosIfParametersExt 2 }
|
||||
|
||||
ntnQosInterfaceTypeExtEntry OBJECT-TYPE
|
||||
SYNTAX NtnQosInterfaceTypeExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An instance of the ntnQosInterfaceTypeExt class."
|
||||
|
||||
AUGMENTS { qosInterfaceTypeEntry }
|
||||
::= { ntnQosInterfaceTypeExtTable 1 }
|
||||
|
||||
NtnQosInterfaceTypeExtEntry ::= SEQUENCE {
|
||||
ntnQosInterfaceTypeExtIfClass INTEGER
|
||||
}
|
||||
|
||||
ntnQosInterfaceTypeExtIfClass OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
core(1), -- Trusted traffic
|
||||
access(2) -- Non-trusted traffic
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A value describing the overall classification of
|
||||
traffic received on interfaces with the given role
|
||||
combination. Traffic received on core (i.e., trusted)
|
||||
interfaces may be processed differently and be subject
|
||||
to different restrictions that traffic received on
|
||||
access (i.e., non-trusted) interfaces. The treatment
|
||||
of traffic based on interface class is implementation
|
||||
dependent."
|
||||
|
||||
::= { ntnQosInterfaceTypeExtEntry 1 }
|
||||
|
||||
--
|
||||
|
||||
--
|
||||
-- Nortel Networks 802.1p DSCP Mapping Extension Table
|
||||
--
|
||||
-- Supports augmenting the information regarding the
|
||||
-- mapping of DSCPs to 802.1p and drop precedence values.
|
||||
--
|
||||
|
||||
ntnQosIfDscpMappingExtTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF NtnQosIfDscpMappingExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Supports augmenting the information regarding
|
||||
the mapping of DSCP values to 802.1p user priority
|
||||
and drop precedence values."
|
||||
|
||||
::= { ntnQosIfParametersExt 3 }
|
||||
|
||||
ntnQosIfDscpMappingExtEntry OBJECT-TYPE
|
||||
SYNTAX NtnQosIfDscpMappingExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An instance of the ntnQosIfDscpMappingExt class."
|
||||
|
||||
AUGMENTS { qos802DscpMappingEntry }
|
||||
::= { ntnQosIfDscpMappingExtTable 1 }
|
||||
|
||||
NtnQosIfDscpMappingExtEntry ::= SEQUENCE {
|
||||
ntnQosIfDscpMappingExtDropPrec DropPrecedence
|
||||
}
|
||||
|
||||
ntnQosIfDscpMappingExtDropPrec OBJECT-TYPE
|
||||
SYNTAX DropPrecedence
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The drop precedence value to use for traffic with the
|
||||
associated DSCP value."
|
||||
|
||||
::= { ntnQosIfDscpMappingExtEntry 1 }
|
||||
|
||||
--
|
||||
-- The Nortel Networks QOS Action Extensions Group
|
||||
--
|
||||
|
||||
ntnQosActionExt
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPibClasses 2 }
|
||||
|
||||
--
|
||||
-- The Nortel Networks QoS Action Extension Table
|
||||
--
|
||||
-- The NTN QoS Action Extension Table describes actions that
|
||||
-- are associated with all ACL defintions. These actions augment
|
||||
-- the standard actions specified in the QOS-POLICY-IP-PIB. An
|
||||
-- action specification may be simple (i.e., a single action)
|
||||
-- or complex (i.e., multiple actions that are performed in
|
||||
-- "parallel").
|
||||
--
|
||||
|
||||
ntnQosActionExtTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF NtnQosActionExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Contains the current set of configured general action
|
||||
extensions. The actions are associated with all types
|
||||
ACLs during operation."
|
||||
|
||||
::= { ntnQosActionExt 1 }
|
||||
|
||||
ntnQosActionExtEntry OBJECT-TYPE
|
||||
SYNTAX NtnQosActionExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"General action extensions. Each entry specifies an instance
|
||||
of the ntnQosActionExt class which describes (potentially)
|
||||
several distinct action attributes. Each action is taken
|
||||
individually regarding the data in question. Several actions
|
||||
can be taken for a single frame.
|
||||
|
||||
An instance of this class can not be deleted while the
|
||||
correspond qosActionTable instance exists."
|
||||
|
||||
AUGMENTS { qosActionEntry }
|
||||
::= { ntnQosActionExtTable 1 }
|
||||
|
||||
NtnQosActionExtEntry ::= SEQUENCE {
|
||||
ntnQosActionExtAssignFlowId INTEGER,
|
||||
ntnQosActionExtCopyToCpu TruthValue,
|
||||
ntnQosActionExtMirrorFrame TruthValue,
|
||||
ntnQosActionExtSetDropPrec INTEGER,
|
||||
ntnQosActionExtUpdatePri INTEGER,
|
||||
ntnQosActionExtMirrorDirection INTEGER
|
||||
}
|
||||
|
||||
ntnQosActionExtAssignFlowId OBJECT-TYPE
|
||||
SYNTAX INTEGER (-1 | 1..65535)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This action attribute, when specified, will cause
|
||||
the packet being evaluated to be associated with the
|
||||
specified flow identifier. Flow identifiers may be
|
||||
used to facilitate traffic shaping and other
|
||||
implementation specific operations at the egress
|
||||
interface.
|
||||
|
||||
Setting this attribute to -1 indicates that flow
|
||||
identification is not in use at the present time."
|
||||
|
||||
::= { ntnQosActionExtEntry 1 }
|
||||
|
||||
ntnQosActionExtCopyToCpu OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This action attribute, when specified, will cause
|
||||
the packet being evaluated to be sent to the CPU
|
||||
for further processing. Extreme care should be taken
|
||||
when setting this object to 'true(1)' since this action
|
||||
may adversely affect resource availability in the
|
||||
system impacting overall system operation.
|
||||
|
||||
A value of 'false(2)' indicates that this action will
|
||||
not be initiated."
|
||||
|
||||
::= { ntnQosActionExtEntry 2 }
|
||||
|
||||
ntnQosActionExtMirrorFrame OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This action attribute, when specified, will cause
|
||||
the packet being evaluated to be sent to a predefined
|
||||
egress port for transmission in addition to the normal
|
||||
processing associated with the packet.
|
||||
|
||||
Specification of the egress port or ports that will
|
||||
serve as the destination for mirrored data is beyond
|
||||
the scope of this document. Furthermore, note that
|
||||
data mirroring can potentially consume substantial
|
||||
resources at the egress. Oversubscription issues
|
||||
should be considered prior to specifying this action.
|
||||
|
||||
Also note that the mirroring direction attribute in
|
||||
this same ntnQosActionExt entry determines the
|
||||
data that is mirrored. The packet that was 'received'
|
||||
by the device will be mirrored (i.e., packet
|
||||
modifications that may occur during processing will
|
||||
not appear in the mirrored data) when the mirroring
|
||||
direction attribute has the value 'ingress(1)'. The
|
||||
packet that is to be 'transmitted' by the device will
|
||||
be mirrored (i.e., packet modifications that may occur
|
||||
during processing will appear in the mirrored data)
|
||||
when the mirroring direction attribute has the value
|
||||
'egress(2)'.
|
||||
|
||||
A value of 'false(2)' indicates that this action will
|
||||
not be initiated."
|
||||
|
||||
::= { ntnQosActionExtEntry 3 }
|
||||
|
||||
ntnQosActionExtSetDropPrec OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
dropPrec1(1),
|
||||
dropPrec2(2),
|
||||
dropPrec3(3),
|
||||
dropPrec4(4),
|
||||
dropPrec5(5),
|
||||
dropPrec6(6),
|
||||
dropPrec7(7),
|
||||
dropPrec8(8),
|
||||
useDefault(9),
|
||||
ignore(10),
|
||||
useEgressMap(11)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This action attribute, when specified, will cause
|
||||
the packet being evaluated to be associated with the
|
||||
specified relative drop precedence. The relative drop
|
||||
precedence may be used to determine traffic
|
||||
precedence relative to other traffic being processed
|
||||
by the device and other implementation specific
|
||||
operations at the egress interface.
|
||||
|
||||
A low value for drop precedence equates to the traffic
|
||||
receiving a higher priority in terms of processing.
|
||||
In other words, traffic with a drop precedence of 1
|
||||
is treated with the highest processing priority while
|
||||
traffic with a drop precedence of 8 receives the
|
||||
lowest processing priority.
|
||||
|
||||
Specifying a value equal to useDefault(9) means that
|
||||
the value for this attribute will be assigned based
|
||||
on default information maintained in the system. The
|
||||
value specified in the 'UpdateDSCP' attribute will
|
||||
be used to determine the default drop precedence. Note
|
||||
that specifying useDefault(9) means that assignment
|
||||
of a value for this attribute is implementation
|
||||
dependent.
|
||||
|
||||
Specifying a value equal to ignore(10) means that
|
||||
no action will be taken related to this attribute.
|
||||
Note that the results of classification where
|
||||
actions specifying ignore(10) are applied are
|
||||
implementation dependent.
|
||||
|
||||
Specifying a value equal to useEgressMap(11) means that
|
||||
the value for this attribute will be assigned based
|
||||
on DSCP-to-drop precedence egress map information
|
||||
maintained in the system. The DSCP value in received
|
||||
traffic will be used to determine the drop precedence.
|
||||
Note that specifying useEgressMap(11) means that assignment
|
||||
of a value for this attribute is implementation
|
||||
dependent."
|
||||
|
||||
::= { ntnQosActionExtEntry 4 }
|
||||
|
||||
ntnQosActionExtUpdatePri OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
markAsPriority0(1),
|
||||
markAsPriority1(2),
|
||||
markAsPriority2(3),
|
||||
markAsPriority3(4),
|
||||
markAsPriority4(5),
|
||||
markAsPriority5(6),
|
||||
markAsPriority6(7),
|
||||
markAsPriority7(8),
|
||||
useDefault(9),
|
||||
ignore(10),
|
||||
useEgressMap(11)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This action attribute, when specified, will cause the
|
||||
value contained in the user priority field of the 802.1Q
|
||||
frame to be updated based on the value of this object.
|
||||
No action is taken if the frame is untagged.
|
||||
|
||||
Specifying a value equal to useDefault(9) means that
|
||||
the value for this attribute will be assigned based
|
||||
on default information maintained in the system. The
|
||||
value specified in the 'UpdateDSCP' attribute will
|
||||
be used to determine the default drop precedence. Note
|
||||
that specifying useDefault(9) means that assignment
|
||||
of a value for this attribute is implementation
|
||||
dependent.
|
||||
|
||||
Specifying a value equal to ignore(10) means that
|
||||
no action will be taken related to this attribute.
|
||||
Note that the results of classification where
|
||||
actions specifying ignore(10) are applied are
|
||||
implementation dependent.
|
||||
|
||||
Specifying a value equal to useEgressMap(11) means that
|
||||
the value for this attribute will be assigned based
|
||||
on DSCP-to-drop precedence egress map information
|
||||
maintained in the system. The DSCP value in received
|
||||
traffic will be used to determine the drop precedence.
|
||||
Note that specifying useEgressMap(11) means that assignment
|
||||
of a value for this attribute is implementation
|
||||
dependent."
|
||||
|
||||
::= { ntnQosActionExtEntry 5 }
|
||||
|
||||
ntnQosActionExtMirrorDirection OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
ingress(1),
|
||||
egress(2)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This action attribute, when specified, will determine
|
||||
where a snapshot of a packet being mirrored will be
|
||||
taken for mirroring purposes. The packet that was
|
||||
'received' by the device will be mirrored (i.e., packet
|
||||
modifications that may occur during processing will not
|
||||
appear in the mirrored data) when the direction attribute
|
||||
has the value 'ingress(1)'. The packet that is to be
|
||||
'transmitted' by the device will be mirrored (i.e., packet
|
||||
modifications that may occur during processing will appear
|
||||
in the mirrored data) when the direction attribute has
|
||||
the value 'egress(2)'.
|
||||
|
||||
Note that the value of this attribute is only considered
|
||||
if the ntnQosActionExtMirrorFrame attribute is 'true'."
|
||||
|
||||
DEFVAL { ingress }
|
||||
::= { ntnQosActionExtEntry 6 }
|
||||
|
||||
--
|
||||
-- The Nortel Networks QOS 802 Filter Extensions Group
|
||||
--
|
||||
|
||||
ntnQos802FilterExt
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPibClasses 3 }
|
||||
|
||||
--
|
||||
-- The Nortel Networks QoS 802 Filter Extension Table
|
||||
--
|
||||
-- The NTN QoS 802 Filter Extension Table describes filter options
|
||||
-- that are used to classify traffic based on certain criteria.
|
||||
-- These filter options augment the standard 802 filter options
|
||||
-- specified in the QOS-POLICY-802-PIB.
|
||||
--
|
||||
|
||||
ntnQos802FilterExtTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF NtnQos802FilterExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Contains the current set of configured 802 filter
|
||||
extensions."
|
||||
|
||||
::= { ntnQos802FilterExt 1 }
|
||||
|
||||
ntnQos802FilterExtEntry OBJECT-TYPE
|
||||
SYNTAX NtnQos802FilterExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Global (802) filter extensions. Each entry specifies an
|
||||
instance of the ntnQos802FilterExt class which describes
|
||||
(potentially) several distinct filter attributes.
|
||||
|
||||
An instance of this class can not be deleted while the
|
||||
correspond qos802AceTable instance exists."
|
||||
|
||||
AUGMENTS { qos802AceEntry }
|
||||
::= { ntnQos802FilterExtTable 1 }
|
||||
|
||||
NtnQos802FilterExtEntry ::= SEQUENCE {
|
||||
ntnQos802FilterDscp INTEGER,
|
||||
ntnQos802FilterProtocol INTEGER,
|
||||
ntnQos802FilterDstL4PortMin INTEGER,
|
||||
ntnQos802FilterDstL4PortMax INTEGER,
|
||||
ntnQos802FilterSrcL4PortMin INTEGER,
|
||||
ntnQos802FilterSrcL4PortMax INTEGER,
|
||||
ntnQos802FilterVlanIdSet OCTET STRING
|
||||
}
|
||||
|
||||
ntnQos802FilterDscp OBJECT-TYPE
|
||||
SYNTAX INTEGER (-1 | 0..63)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value that the DSCP in the packet can have and
|
||||
match this filter. A value of -1 indicates that a specific
|
||||
DSCP value has not been defined and thus all DSCP values
|
||||
are considered a match."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 1 }
|
||||
|
||||
ntnQos802FilterProtocol OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..255)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The IP protocol to match against the packet's protocol.
|
||||
Valid only when applied against IP traffic. A value of
|
||||
zero means match all."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 2 }
|
||||
|
||||
ntnQos802FilterDstL4PortMin OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The minimum value that the packet's layer 4 destination
|
||||
port number can have and match this filter. Valid only
|
||||
when applied against IP traffic flows. The value of
|
||||
this attribute must be less-than-or-equal-to the value of
|
||||
the corresponding ntnQos802FilterDstL4PortMax attribute."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 3 }
|
||||
|
||||
ntnQos802FilterDstL4PortMax OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum value that the packet's layer 4 destination
|
||||
port number can have and match this filter. Valid only
|
||||
when applied against IP traffic flows. The value of
|
||||
this attribute must be greater-than-or-equal-to the value
|
||||
of the corresponding ntnQos802FilterDstL4PortMin attribute."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 4 }
|
||||
|
||||
ntnQos802FilterSrcL4PortMin OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The minimum value that the packet's layer 4 source port
|
||||
number can have and match this filter. Valid only
|
||||
when applied against IP traffic flows. The value of this
|
||||
attribute must be less-than-or-equal-to the value of
|
||||
the corresponding ntnQos802FilterSrcL4PortMax attribute."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 5 }
|
||||
|
||||
ntnQos802FilterSrcL4PortMax OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum value that the packet's layer 4 source port
|
||||
number can have and match this filter. Valid only
|
||||
when applied against IP traffic flows. The value of this
|
||||
attribute must be greater-than-or-equal-to the value of
|
||||
the corresponding ntnQos802FilterSrcL4PortMin attribute."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 6 }
|
||||
|
||||
ntnQos802FilterVlanIdSet OBJECT-TYPE
|
||||
SYNTAX OCTET STRING (SIZE(0..256))
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This attribute is used to specify a set of VLAN IDs
|
||||
against which the traffic being classified is compared.
|
||||
Packets that contain a VLAN ID equal to one of the VLAN
|
||||
IDs in this set match this component of an 802 filter.
|
||||
|
||||
The format of this octet string is a series of two-byte
|
||||
(16 bit) values with each octet tuple identifying a
|
||||
single VLAN ID in the set. Therefore, the length of the
|
||||
octet string value of this object is always either zero
|
||||
or an even number of octets (e.g., 2, 4, 6, 20). As with
|
||||
most sets, ordering within the set (octet string) is
|
||||
unimportant. For example, a set specifying three VLAN
|
||||
IDs (8, 35 and 4012) might be specified as follows:
|
||||
|
||||
Octets: 1 | 2 | 3 | 4 | 5 | 6
|
||||
------------------------------------------------
|
||||
Values: 0x00 | 0x23 | 0x00 | 0x08 | 0x0F | 0xAC
|
||||
------------------------------------------------
|
||||
VLAN ID: 35 | 8 | 4012
|
||||
|
||||
The supported maximum length of this attribute depends
|
||||
on the maximum number of VLANs that may be included in
|
||||
a set for filtering purposes. This length is thus
|
||||
implementation dependent.
|
||||
|
||||
Note that this attribute and the qos802AceVlanId
|
||||
attribute are mutually exclusive. The value of the
|
||||
qos802AceVlanId component of the augmented filter
|
||||
entry must be set to 'ignore' (i.e., -1) if the length
|
||||
of this set is non-zero. Otherwise entry creation will
|
||||
fail."
|
||||
|
||||
::= { ntnQos802FilterExtEntry 7 }
|
||||
|
||||
--
|
||||
-- Conformance Section
|
||||
--
|
||||
|
||||
ntnQosPolicyExtPibConformance
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPib 2 }
|
||||
|
||||
ntnQosPolicyExtPibCompliances
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPibConformance 1 }
|
||||
ntnQosPolicyExtPibGroups
|
||||
OBJECT IDENTIFIER ::= { ntnQosPolicyExtPibConformance 2 }
|
||||
|
||||
ntnQosPolicyExtPibCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Describes the requirements for conformance to the
|
||||
Nortel Networks QoS Policy Extension PIB."
|
||||
|
||||
MODULE -- this module
|
||||
|
||||
GROUP ntnQosIfPriAssignmentGroup
|
||||
DESCRIPTION
|
||||
"The ntnQosIfPriAssignmentGroup is mandatory if
|
||||
mapping 802.1 user priority values to queues is
|
||||
supported."
|
||||
|
||||
OBJECT ntnQosIfPriAssignmentRoles
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosIfPriAssignmentPri
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosIfPriAssignmentQueue
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosIfPriAssignmentStorageType
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required, nor is
|
||||
support for the nonVolatile(2) enumeration."
|
||||
|
||||
OBJECT ntnQosIfPriAssignmentStatus
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
GROUP ntnQosInterfaceTypeExtGroup
|
||||
DESCRIPTION
|
||||
"The ntnQosInterfaceTypeExtTable is optional."
|
||||
|
||||
OBJECT ntnQosInterfaceTypeExtIfClass
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
GROUP ntnQosIfDscpMappingExtGroup
|
||||
DESCRIPTION
|
||||
"The ntnQosIfDscpMappingExtGroup is optional."
|
||||
|
||||
OBJECT ntnQosIfDscpMappingExtDropPrec
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
GROUP ntnQosActionExtGroup
|
||||
DESCRIPTION
|
||||
"The ntnQosActionExtGroup is optional."
|
||||
|
||||
OBJECT ntnQosActionExtAssignFlowId
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosActionExtCopyToCpu
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosActionExtMirrorFrame
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosActionExtSetDropPrec
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosActionExtUpdatePri
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQosActionExtMirrorDirection
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
GROUP ntnQos802FilterExtGroup
|
||||
DESCRIPTION
|
||||
"The ntnQos802FilterExtGroup is optional."
|
||||
|
||||
OBJECT ntnQos802FilterDscp
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQos802FilterProtocol
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQos802FilterDstL4PortMin
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQos802FilterDstL4PortMax
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQos802FilterSrcL4PortMin
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQos802FilterSrcL4PortMax
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
OBJECT ntnQos802FilterVlanIdSet
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION "Write access is not required."
|
||||
|
||||
::= { ntnQosPolicyExtPibCompliances 1 }
|
||||
|
||||
ntnQosIfPriAssignmentGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ntnQosIfPriAssignmentRoles,
|
||||
ntnQosIfPriAssignmentPri,
|
||||
ntnQosIfPriAssignmentQueue,
|
||||
ntnQosIfPriAssignmentStorageType,
|
||||
ntnQosIfPriAssignmentStatus
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects from the ntnQosIfPriAssignmentTable."
|
||||
|
||||
::= { ntnQosPolicyExtPibGroups 1 }
|
||||
|
||||
ntnQosInterfaceTypeExtGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ntnQosInterfaceTypeExtIfClass
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects from the ntnQosInterfaceTypeExtTable."
|
||||
|
||||
::= { ntnQosPolicyExtPibGroups 2 }
|
||||
|
||||
ntnQosIfDscpMappingExtGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ntnQosIfDscpMappingExtDropPrec
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects from the ntnQosIfDscpMappingExtTable."
|
||||
|
||||
::= { ntnQosPolicyExtPibGroups 3 }
|
||||
|
||||
ntnQosActionExtGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ntnQosActionExtAssignFlowId,
|
||||
ntnQosActionExtCopyToCpu,
|
||||
ntnQosActionExtMirrorFrame,
|
||||
ntnQosActionExtSetDropPrec,
|
||||
ntnQosActionExtUpdatePri,
|
||||
ntnQosActionExtMirrorDirection
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects from the ntnQosActionExtTable."
|
||||
|
||||
::= { ntnQosPolicyExtPibGroups 4 }
|
||||
|
||||
ntnQos802FilterExtGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ntnQos802FilterDscp,
|
||||
ntnQos802FilterProtocol,
|
||||
ntnQos802FilterDstL4PortMin,
|
||||
ntnQos802FilterDstL4PortMax,
|
||||
ntnQos802FilterSrcL4PortMin,
|
||||
ntnQos802FilterSrcL4PortMax,
|
||||
ntnQos802FilterVlanIdSet
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects from the ntnQos802FilterExtTable."
|
||||
|
||||
::= { ntnQosPolicyExtPibGroups 5 }
|
||||
|
||||
END
|
||||
|
||||
Reference in New Issue
Block a user