WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

600
mibs/media5/MX-FPU-MIB Normal file
View File

@ -0,0 +1,600 @@
-- ****************************************************************************
-- ****************************************************************************
-- Copyright(c) 2004 Mediatrix Telecom, Inc.
-- NOTICE:
-- This document contains information that is confidential and proprietary
-- to Mediatrix Telecom, Inc.
-- Mediatrix Telecom, Inc. reserves all rights to this document as well as
-- to the Intellectual Property of the document and the technology and
-- know-how that it includes and represents.
-- This publication cannot be reproduced, neither in whole nor in part in
-- any form whatsoever without written prior approval by
-- Mediatrix Telecom, Inc.
-- Mediatrix Telecom, Inc. reserves the right to revise this publication
-- and make changes at any time and without the obligation to notify any
-- person and/or entity of such revisions and/or changes.
-- ****************************************************************************
-- ****************************************************************************
MX-FPU-MIB
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MxEnableState,
MxActivationState,
MxIpHostName,
MxIpAddress,
MxIpPort,
MxAdvancedIpPort,
MxIpSubnetMask,
MxDigitMap
FROM MX-TC
MxUInt64,
MxFloat32,
MxIpHostNamePort,
MxIpAddr,
MxIpAddrPort,
MxIpAddrMask,
MxUri,
MxUrl
FROM MX-TC2
mediatrixServices
FROM MX-SMI2;
fpuMIB MODULE-IDENTITY
LAST-UPDATED "1910210000Z"
ORGANIZATION " Mediatrix Telecom, Inc. "
CONTACT-INFO " Mediatrix Telecom, Inc.
4229, Garlock Street
Sherbrooke (Quebec)
Canada
Phone: (819) 829-8749
"
DESCRIPTION " Firmware Pack Updater
The Firmware Pack Updater (FPU) service manages firmware
upgrade, downgrade and rollback operations.
"
::= { mediatrixServices 1300 }
fpuMIBObjects OBJECT IDENTIFIER ::= { fpuMIB 1 }
-- *****************************************************************************
-- Table:Installed MFPs
-- *****************************************************************************
mfpInstalledInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF MfpInstalledInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " Installed MFPs
List of Firmware Packs that are currently installed on the unit.
"
::= { fpuMIBObjects 100 }
mfpInstalledInfoEntry OBJECT-TYPE
SYNTAX MfpInstalledInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " A row in table Installed MFPs. "
INDEX {
mfpInstalledInfoIndex
}
::= { mfpInstalledInfoTable 1 }
MfpInstalledInfoEntry ::= SEQUENCE
{
mfpInstalledInfoIndex Unsigned32,
mfpInstalledInfoMfpName OCTET STRING,
mfpInstalledInfoMfpVersion OCTET STRING,
mfpInstalledInfoMfpBank INTEGER,
mfpInstalledInfoMfpProfileName OCTET STRING
}
-- Columnar:Name
mfpInstalledInfoMfpName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Name
Name of the MFP.
"
::= { mfpInstalledInfoEntry 100 }
-- Columnar:Version
mfpInstalledInfoMfpVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Version
Version of the MFP installed.
"
::= { mfpInstalledInfoEntry 200 }
-- Columnar:Bank
mfpInstalledInfoMfpBank OBJECT-TYPE
SYNTAX INTEGER { none(100) , main(200) , recovery(300) , mainInUse
(400) , recoveryInUse(500) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Bank
Bank where the MFP is installed.
"
::= { mfpInstalledInfoEntry 300 }
-- Columnar:Profile Name
mfpInstalledInfoMfpProfileName OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE(0..255) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Profile Name
Name of the profile.
"
::= { mfpInstalledInfoEntry 400 }
-- Index:MFPs Installed Info Index
mfpInstalledInfoIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION " MFPs Installed Info Index
Index of the currently installed MFPs.
"
::= { mfpInstalledInfoEntry 50 }
-- End of table:Installed MFPs
-- Scalar:Status
status OBJECT-TYPE
SYNTAX INTEGER { waitingSystemReady(100) , idle(200) , updating(300) ,
waitingManualRestart(400) , rollbacking(500) ,
waitingForGracefulRestart(600) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Status
Indicates the current status of the Firmware Pack Updater.
* WaitingSystemReady: Waiting for the system restart to
complete.
* Idle: Ready to process a command.
* Updating: Currently downloading and installing a firmware.
* WaitingManualRestart: Waiting for a manual restart to
complete a firmware update.
* WaitingForGracefulRestart: Waiting for graceful shutdown of
services before completing a firmware update.
"
::= { fpuMIBObjects 110 }
-- Scalar:Last Result
mfpLastInstallationResult OBJECT-TYPE
SYNTAX INTEGER { none(100) , success(200) , fail(300) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Last Result
Result of the last Install command.
* None: No installation result available.
* Success: The last installation succeeded.
* Fail: The last installation failed.
"
::= { fpuMIBObjects 125 }
-- Scalar:Firmware Installation Date and Time
mfpLastInstallationDateTime OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE(0..255) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Firmware Installation Date and Time
Date and time when the firmware was installed.
"
::= { fpuMIBObjects 150 }
-- Scalar:Rollback Available
mfpRollbackAvailable OBJECT-TYPE
SYNTAX INTEGER { no(0) , yes(100) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Rollback Available
Indicates whether or not a MFP rollback operation is available.
"
::= { fpuMIBObjects 175 }
-- ****************************************************************************
-- Group:MFP Repository
-- Configuration relative to the remote update tree, i.e., where to get update
-- files.
-- ****************************************************************************
mfpRepositoryGroup OBJECT IDENTIFIER
::= { fpuMIBObjects 400 }
-- ***************************************************************************
-- Group:File Transfer
-- ***************************************************************************
mfpTransferGroup OBJECT IDENTIFIER
::= { mfpRepositoryGroup 200 }
-- Scalar:User Name
mfpTransferUsername OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE(0..63) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION " User Name
User name used for transfer authentication, if required.
"
DEFVAL { "" }
::= { mfpTransferGroup 200 }
-- Scalar:Password
mfpTransferPassword OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE(0..63) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Password
Password used for transfer authentication, if required.
"
DEFVAL { "" }
::= { mfpTransferGroup 300 }
-- Scalar:Level of security for HTTPS certificate validation.
mfpTransferCertificateValidation OBJECT-TYPE
SYNTAX INTEGER { noValidation(100) , hostName(200) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Level of security for HTTPS certificate validation.
When downloading a MFP from an HTTPS server, this parameter
defines the level of security to use when validating the
server's certificate.
* NoValidation: Allow a connection to the server without
validating its certificate. The only condition is to
receive a certificate from the server. This option
provides partial security and should be selected with
care.
* HostName: Allow a connection to the server by validating
its certificate is trusted and valid. The validations
performed on the certificate include the expiration date
and that the Subject Alternate Name (SAN) or Common Name
(CN) matches the FQDN or IP address of the server.
"
DEFVAL { hostName }
::= { mfpTransferGroup 500 }
-- Scalar:Certificate Trust Level for HTTPS connections
mfpTransferCertificateTrustLevel OBJECT-TYPE
SYNTAX INTEGER { locallyTrusted(100) , ocspOptional(200) ,
ocspMandatory(300) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Certificate Trust Level for HTTPS connections
Define how a peer certificate is considered trusted for a
HTTPS connection.
* LocallyTrusted: A certificate is considered trusted when
the certificate authority (CA) that signed the peer
certificate is present in the Cert.OthersCertificatesInfo
table. The certificate revocation status is not verified.
* OcspOptional: A certificate is considered trusted when it
is locally trusted and is not revoked by its certificate
authority (CA). The certificate revocation status is
queried using the Online Certificate Status Protocol
(OCSP). If the OCSP server is not available or the
verification status is unknown, the certificate is
considered trusted.
* OcspMandatory: A certificate is considered trusted when it
is locally trusted and is not revoked by its certificate
authority (CA). The certificate revocation status is
queried using the Online Certificate Status Protocol
(OCSP). If the OCSP server is not available or the
verification status is unknown, the certificate is
considered not trusted.
"
DEFVAL { locallyTrusted }
::= { mfpTransferGroup 600 }
-- Scalar:Mfp Transfer Cipher Suite
mfpTransferCipherSuite OBJECT-TYPE
SYNTAX INTEGER { cS1(100) , cS2(200) , cS3(300) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Mfp Transfer Cipher Suite
Defines the allowed cipher suites for the network security
settings when using the HTTPS transfer protocol. When the
device initiates an HTTPS connection to a server it will
negotiate the cipher suite according to its configuration.
* CS1:
+ TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ TLS_DHE_DSS_WITH_AES_256_CBC_SHA
+ TLS_RSA_WITH_AES_256_CBC_SHA
+ TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
+ TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
+ TLS_RSA_WITH_3DES_EDE_CBC_SHA
+ TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ TLS_DHE_DSS_WITH_AES_128_CBC_SHA
+ TLS_RSA_WITH_AES_128_CBC_SHA
+ TLS_RSA_WITH_RC4_128_SHA
+ TLS_RSA_WITH_RC4_128_MD5
* CS2:
+ TLS_RSA_WITH_AES_128_CBC_SHA
+ TLS_RSA_WITH_AES_256_CBC_SHA
+ TLS_RSA_WITH_3DES_EDE_CBC_SHA
+ TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
* CS3:
+ TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ TLS_RSA_WITH_AES_256_GCM_SHA384
+ TLS_RSA_WITH_AES_256_CBC_SHA256
+ TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ TLS_RSA_WITH_AES_128_GCM_SHA256
+ TLS_RSA_WITH_AES_128_CBC_SHA256
"
DEFVAL { cS1 }
::= { mfpTransferGroup 700 }
-- Scalar:TLS Version
mfpTransferTlsVersion OBJECT-TYPE
SYNTAX INTEGER { sSLv3(100) , tLSv1(200) , tLSv1-1(300) , tLSv1-2
(400) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " TLS Version
Defines the allowed TLS versions for the network security
settings when using the HTTPS transfer protocol. When the
device initiates an HTTPS connection to a server it will
negotiate the TLS version according to its configuration.
* SSLv3: Allow SSL version 3 and all TLS versions.
* TLSv1: Allow TLS versions 1 and up.
* TLSv1_1: Allow TLS versions 1.1 and up.
* TLSv1_2: Allow TLS versions 1.2 and up.
The device will always send its highest supported TLS version
in the ClientHello message. The server will select the highest
supported TLS version it supports from the ClientHello
message. The device will then validate that the selected
version is allowed. If the version is not allowed the device
will close the connection.
"
DEFVAL { tLSv1 }
::= { mfpTransferGroup 800 }
-- End of group:File Transfer
-- End of group:MFP Repository
-- Scalar:MFP URL
mfpUrl OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION " MFP URL
URL of the MFP 'single file' to install. The supported transfer
protocols are:
* HTTP
* HTTPS
* TFTP
* FTP
Examples of valid URLs:
* http://www.myserver.com/myfile.bin
* tftp://myserver.com:69/myfolder/myfile.bin
When the port is not included in the URL, the default port for
the chosen protocol is used.
For authentication, it is recommended to use the
Fpu.MfpTransferUsername and Fpu.MfpTransferPassword parameters.
The credentials may also be provisioned directly in the URL
using the syntax protocol://[username[:password]@]hostname
[:port]/[path/]filename with the following constraints:
* No '/', ':' and '@' characters should be present in username
or password.
* No percent escaping.
* The password will appear in clear in the URL field in the
Web page.
If a username/password is specified both in the URL and in the
provisioning parameters, values specified in the URL will have
precedence over the ones specified in the parameters.
This parameter may contain some macros that are substituted by
the actual value at the moment of fetching the MFP file.
The supported macros are:
* %mac% - the MAC address of the unit.
* %product% - the product name of the unit.
* %productseries% - the product series name of the unit.
* %serial% - the serial number of the unit.
"
DEFVAL { "" }
::= { fpuMIBObjects 450 }
-- Scalar:Automatic Restart
automaticRestartEnable OBJECT-TYPE
SYNTAX MxEnableState
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Automatic Restart
Enables the firmware pack updater to automatically restart the
system when needed for completing a firmware update operation.
Also see the AutomaticRestartGraceDelay parameter.
"
DEFVAL { disable }
::= { fpuMIBObjects 500 }
-- Scalar:Automatic Restart Grace Delay
automaticRestartGraceDelay OBJECT-TYPE
SYNTAX Unsigned32 ( 0..10080 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Automatic Restart Grace Delay
Configures the grace delay in minutes that the unit waits for
all telephony calls to be terminated before the automatic
restart can occur.
This value is expressed in minutes. The maximum value is set to
10080 minutes (7 days).
Also see the AutomaticRestartEnable parameter.
"
DEFVAL { 0 }
::= { fpuMIBObjects 600 }
-- Scalar:Default Settings On Firmware Installation.
defaultSettingsOnInstall OBJECT-TYPE
SYNTAX MxEnableState
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Default Settings On Firmware Installation.
When set to 'Enable', the unit automatically executes a factory
reset upon completion of a firmware installation.
"
DEFVAL { disable }
::= { fpuMIBObjects 700 }
-- ****************************************************************************
-- Group:Notification Messages Configuration
-- ****************************************************************************
notificationsGroup OBJECT IDENTIFIER
::= { fpuMIBObjects 60010 }
-- Scalar:Minimal Severity of Notification
minSeverity OBJECT-TYPE
SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) ,
error(400) , critical (500) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Minimal Severity of Notification
Sets the minimal severity to issue a notification message
incoming from this service.
* Disable: No notification is issued.
* Debug: All notification messages are issued.
* Info: Notification messages with a 'Informational' and
higher severity are issued.
* Warning: Notification messages with a 'Warning' and higher
severity are issued.
* Error: Notification messages with an 'Error' and higher
severity are issued.
* Critical: Notification messages with a 'Critical' severity
are issued.
"
DEFVAL { warning }
::= { notificationsGroup 100 }
-- End of group:Notification Messages Configuration
-- ****************************************************************************
-- Group:Configuration Settings
-- ****************************************************************************
configurationGroup OBJECT IDENTIFIER
::= { fpuMIBObjects 60020 }
-- Scalar:Need Restart
needRestartInfo OBJECT-TYPE
SYNTAX INTEGER { no(0) , yes(100) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Need Restart
Indicates if the service needs to be restarted for the
configuration to fully take effect.
* Yes: Service needs to be restarted.
* No: Service does not need to be restarted.
Services can be restarted by using the
Scm.ServiceCommands.Restart command.
"
::= { configurationGroup 100 }
-- End of group:Configuration Settings
END