initial commit; version 22.5.12042

mibs/juniper/IPMCAST-MIB-CAPABILITY

@@ -0,0 +1,244 @@
+-- *****************************************************************
+-- IPMCAST-CAPABILITY.mib: Juniper IPMCAST AGENT-CAPABILITIES
+--
+-- Copyright (c) 2014, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+IPMCAST-MIB-CAPABILITY DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY
+            FROM SNMPv2-SMI
+    AGENT-CAPABILITIES
+            FROM SNMPv2-CONF
+    jnxAgentCapability
+            FROM JUNIPER-SMI;
+
+jnxipMcastCapability MODULE-IDENTITY
+    LAST-UPDATED "201409180000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+            Juniper Networks, Inc.
+            1133 Innovation Way
+            Sunnyvale, CA 94089
+            E-mail: support@juniper.net"
+
+    DESCRIPTION
+        "Agent capabilities for IPMCAST-MIB (RFC5132)"
+    ::= { jnxAgentCapability 5 }
+
+jnxipMcastCapJunos AGENT-CAPABILITIES
+
+    PRODUCT-RELEASE "All JUNOS Version"
+    STATUS          current
+    DESCRIPTION     "IPMCAST capabilities"
+
+    SUPPORTS        IPMCAST-MIB
+    INCLUDES        { ipMcastMIBRouteProtoGroup,
+                      ipMcastMIBBasicGroup,
+                      ipMcastMIBSsmGroup,
+                      ipMcastMIBRouteGroup,
+                      ipMcastMIBBoundaryIfGroup,
+                      ipMcastMIBScopeNameGroup
+                    }
+
+-- ipMcastMIBRouteProtoGroup
+    VARIATION    ipMcastRouteProtocol
+    ACCESS       read-only
+    DESCRIPTION  "Write is not supported. This object return protocol via 
+                  which multicast entry learned" 
+
+    VARIATION   ipMcastRouteRtProtocol
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return routing mechanism via 
+                which the route used to find the upstream or parent interface 
+                for this multicast forwarding  entry was learned"
+     
+    VARIATION   ipMcastRouteRtAddressType
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return value indicating the 
+                address family of the address contained in ipMcastRouteRtAddress"
+
+    VARIATION   ipMcastRouteRtAddress
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return The address portion 
+                of the route used to find the upstream or parent interface for 
+                this multicast forwarding entry"
+
+
+    VARIATION   ipMcastRouteRtPrefixLength
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return length in bits
+                of the mask associated with the route used to find the 
+                upstream or parent interface"
+
+    VARIATION   ipMcastRouteRtType
+    SYNTAX      INTEGER {
+                    unicast (1),
+                    multicast (2)
+                }       
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported"
+
+    VARIATION   ipMcastRouteNextHopProtocol
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return routing mechanism via 
+                 which this next-hop was learned"
+
+-- ipMcastMIBBasicGroup 
+
+    VARIATION   ipMcastEnabled
+    ACCESS      read-only
+    DESCRIPTION "Write access is not required."
+
+    VARIATION   ipMcastRouteEntryCount
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return The number of rows
+                in the ipMcastRouteTable"
+
+    VARIATION   ipMcastDeviceConfigStorageType
+    ACCESS      read-only 
+    DESCRIPTION "Write is not supported. Always returns value 2 meaning it is
+                volatile"
+
+-- ipMcastMIBSsmGroup
+
+    VARIATION   ipMcastSsmRangeRowStatus
+    ACCESS      read-only
+    DESCRIPTION "Write access is not Supported."
+
+    VARIATION   ipMcastSsmRangeStorageType
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always returns value 2 meaning it is
+                volatile"
+
+-- ipMcastMIBRouteGroup
+
+    VARIATION   ipMcastInterfaceTtl
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always return 0 which means all the
+                multicast packets are forwarded out the interface."
+
+    VARIATION   ipMcastInterfaceRateLimit
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always return value 0 means no rate
+                limiting is done."
+
+    VARIATION   ipMcastInterfaceStorageType
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always returns value 2 meaning it is
+                volatile."
+
+    VARIATION   ipMcastRouteUpstreamNeighborType
+    ACCESS      read-only
+    DESCRIPTION "Support either ipv4 or ipv6. This object return  value
+                indicating the address family of the address contained 
+                in ipMcastRouteUpstreamNeighbor"
+
+    VARIATION   ipMcastRouteUpstreamNeighbor
+    ACCESS      read-only
+    DESCRIPTION "This object return address of the upstream neighbor from which
+                IP datagrams from these sources to this multicast address are 
+                received."
+
+    VARIATION   ipMcastRouteInIfIndex
+    ACCESS      read-only
+    DESCRIPTION "This object return ifIndex for the interface on which IP
+                datagrams sent by these sources to this multicast address
+                are received."
+    
+    VARIATION   ipMcastRouteTimeStamp
+    ACCESS      read-only
+    DESCRIPTION "This object return value of sysUpTime at which the multicast
+                routing information represented by this entry was learned by the
+                router."
+    
+    VARIATION   ipMcastRouteExpiryTime
+    ACCESS      read-only
+    DESCRIPTION "This object return The minimum amount of time remaining before
+                this entry will be aged out."
+
+    VARIATION   ipMcastRouteNextHopState
+    SYNTAX      INTEGER { 
+                            pruned(1), 
+                            forwarding(2) 
+                }
+    ACCESS      read-only
+    DESCRIPTION "This object return state of interface currently being used to
+                forward IP datagrams."
+    
+    VARIATION   ipMcastRouteNextHopTimeStamp
+    ACCESS      read-only
+    DESCRIPTION "This object return value of sysUpTime at which the multicast 
+                routing information represented by this entry was learned by the
+                router."
+    
+    VARIATION   ipMcastRouteNextHopExpiryTime
+    ACCESS      read-only
+    DESCRIPTION "Always return Zero (0)."
+    
+-- ipMcastMIBBoundaryIfGroup
+
+    VARIATION   ipMcastBoundaryTimeStamp 
+    ACCESS      read-only
+    DESCRIPTION "Always return  Zero (0)"
+
+    VARIATION   ipMcastBoundaryDroppedMcastOctets
+    ACCESS      read-only
+    DESCRIPTION "Always return Zero (0)."
+
+    VARIATION   ipMcastBoundaryDroppedMcastPkts 
+    ACCESS      read-only
+    DESCRIPTION "This object return the number of multicast packets that
+                 have been dropped as a result of this zone boundary 
+                 configuration."
+
+    VARIATION   ipMcastBoundaryStatus 
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always display as active."
+
+    VARIATION   ipMcastBoundaryStorageType 
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Alayws return nonVolatile(3)"
+
+    VARIATION   ipMcastZoneScopeDefaultZoneIndex
+    ACCESS      not-implemented
+    DESCRIPTION "not supported."
+
+    VARIATION   ipMcastZoneScopeAddressType
+    ACCESS      not-implemented
+    DESCRIPTION "not supported."
+
+    VARIATION   ipMcastZoneScopeAddress
+    ACCESS      not-implemented
+    DESCRIPTION "not supported."
+
+    VARIATION   ipMcastZoneScopeAddressPrefixLength
+    ACCESS      not-implemented
+    DESCRIPTION "not supported."
+
+-- ipMcastMIBScopeNameGroup
+
+    VARIATION   ipMcastScopeNameString
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. This object return textual name
+                associated with the multicast scope."
+
+    VARIATION   ipMcastScopeNameDefault 
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always set as false."
+    
+    VARIATION   ipMcastScopeNameStatus
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Always display as active."
+
+    VARIATION   ipMcastScopeNameStorageType
+    ACCESS      read-only
+    DESCRIPTION "Write is not supported. Alayws return nonVolatile(3)."
+
+::= { jnxipMcastCapability 1 }
+
+END

mibs/juniper/JNX-BFD-STD-MIB

@@ -0,0 +1,857 @@
+JNX-BFD-STD-MIB DEFINITIONS ::= BEGIN  
+   IMPORTS 
+      MODULE-IDENTITY, OBJECT-TYPE,  
+      Unsigned32, Counter32, Counter64,  
+      NOTIFICATION-TYPE 
+         FROM SNMPv2-SMI                        -- [RFC2578]
+    
+      MODULE-COMPLIANCE, OBJECT-GROUP, 
+      NOTIFICATION-GROUP     
+          FROM SNMPv2-CONF                      -- [RFC2580]
+    
+      TEXTUAL-CONVENTION, TruthValue, 
+      RowStatus, StorageType, TimeStamp 
+         FROM SNMPv2-TC                         -- [RFC2579]
+    
+      InetAddress, InetAddressType, InetPortNumber 
+         FROM INET-ADDRESS-MIB                  -- [RFC3291]
+
+      -- Juniper specific                                       *** JNX ***
+      jnxBfdExperiment                                       -- *** JNX ***
+         FROM JUNIPER-EXPERIMENT-MIB                         -- *** JNX ***
+   ; 
+    
+   bfdMIB MODULE-IDENTITY 
+      LAST-UPDATED "200507221200Z"  -- 04 July 2005 12:00:00 EST 
+      ORGANIZATION "IETF" 
+      CONTACT-INFO 
+          "        Thomas D. Nadeau 
+                   Cisco Systems, Inc. 
+           Email:  tnadeau@cisco.com 
+    
+                   Zafar Ali  
+                   Cisco Systems, Inc. 
+           Email:  zali@cisco.com 
+          " 
+      DESCRIPTION 
+          "Bidirectional Forwarding Management Information Base." 
+    
+      -- Revision history. 
+      REVISION 
+          "200508221200Z"  -- 04 August 2005 12:00:00 EST 
+      DESCRIPTION 
+      "Initial version. Published as RFC xxxx." -- RFC-editor pls fill 
+                                                -- in xxxx
+   ::= { jnxBfdExperiment 1 }
+
+   -- Top level components of this MIB module. 
+
+   bfdNotifications OBJECT IDENTIFIER ::= { bfdMIB 0 } 
+    
+   bfdObjects       OBJECT IDENTIFIER ::= { bfdMIB 1 } 
+    
+   bfdConformance   OBJECT IDENTIFIER ::= { bfdMIB 3 } 
+    
+   bfdScalarObjects OBJECT IDENTIFIER ::= { bfdObjects 1 } 
+    
+    
+   --  Textual Conventions 
+    
+   BfdSessIndexTC ::= TEXTUAL-CONVENTION 
+      DISPLAY-HINT "d" 
+      STATUS        current 
+      DESCRIPTION 
+          "An index used to uniquely identify BFD sessions." 
+      SYNTAX Unsigned32 (1..4294967295) 
+    
+   BfdInterval ::= TEXTUAL-CONVENTION 
+      STATUS        current 
+      DESCRIPTION 
+          "The BFD interval delay in microseconds." 
+      SYNTAX        Unsigned32 (1..4294967295) 
+    
+   BfdDiag ::=      TEXTUAL-CONVENTION 
+      STATUS        current 
+      DESCRIPTION 
+          "A common BFD diagnostic code." 
+    
+      SYNTAX INTEGER { noDiagnostic(1),  
+                       controlDetectionTimeExpired(2),  
+                       echoFunctionFailed(3),  
+                       neighborSignaledSessionDown(4),  
+                       forwardingPlaneReset(5), 
+                       pathDown(6),  
+                       concatenatedPathDown(7), 
+                       administrativelyDown(8),  
+                       reverseConcatenatedPathDown (9) 
+                     } 
+    
+        --  BFD General Variables 
+    
+        --  These parameters apply globally to the Router's 
+        --  BFD Process. 
+    
+   bfdAdminStatus OBJECT-TYPE 
+      SYNTAX   INTEGER { enabled(1), disabled(2) }         
+--      MAX-ACCESS   read-write 
+      MAX-ACCESS   read-only 
+      STATUS   current 
+      DESCRIPTION 
+              "The global administrative status of BFD in this router.  
+               The value 'enabled' denotes that the BFD Process is 
+               active on at least one interface; 'disabled' disables  
+               it on all interfaces." 
+      DEFVAL { enabled }  
+      ::= { bfdScalarObjects 1 } 
+    
+   bfdVersionNumber OBJECT-TYPE 
+      SYNTAX   Unsigned32 
+      MAX-ACCESS   read-only 
+      STATUS   current 
+      DESCRIPTION 
+              "The current version number of the BFD protocol." 
+      REFERENCE 
+              " BFD Version 0 (draft-katz-ward-bfd-02.txt)" 
+      DEFVAL { 0 } 
+      ::= { bfdScalarObjects 3 } 
+    
+    
+   --  BFD Session Table 
+   --  The BFD Session Table specifies BFD session specific 
+   --  information.  
+    
+   bfdSessTable OBJECT-TYPE 
+      SYNTAX   SEQUENCE OF BfdSessEntry 
+      MAX-ACCESS   not-accessible 
+      STATUS   current 
+      DESCRIPTION 
+              "The BFD Session Table describes the BFD sessions." 
+      REFERENCE 
+              "BFD Version 0 (draft-katz-ward-bfd-02.txt)" 
+      ::= { bfdObjects 2 } 
+    
+   bfdSessEntry OBJECT-TYPE 
+      SYNTAX      BfdSessEntry 
+      MAX-ACCESS  not-accessible 
+      STATUS      current 
+      DESCRIPTION 
+              "The BFD Session Entry describes BFD session." 
+      INDEX { bfdSessIndex } 
+      ::= { bfdSessTable 1 } 
+    
+   BfdSessEntry ::= SEQUENCE { 
+      bfdSessIndex                    BfdSessIndexTC, 
+      bfdSessApplicationId            Unsigned32, 
+      bfdSessDiscriminator            Unsigned32, 
+      bfdSessRemoteDiscr              Unsigned32,  
+      bfdSessUdpPort                  InetPortNumber, 
+      bfdSessState                    INTEGER, 
+      bfdSessRemoteHeardFlag          TruthValue,   
+      bfdSessDiag                     Unsigned32, 
+      bfdSessOperMode                 INTEGER, 
+      bfdSessDemandModeDesiredFlag    TruthValue, 
+      bfdSessEchoFuncModeDesiredFlag  TruthValue, 
+      bfdSessControlPlanIndepFlag     TruthValue, 
+      bfdSessAddrType                 InetAddressType, 
+      bfdSessAddr                     InetAddress,  
+      bfdSessDesiredMinTxInterval     BfdInterval, 
+      bfdSessDesiredMinRxInterval     BfdInterval, 
+      bfdSessDesiredMinEchoRxInterval BfdInterval, 
+      bfdSessDetectMult               Unsigned32, 
+      bfdSessStorType                 StorageType, 
+      bfdSessRowStatus                RowStatus, 
+      bfdSessAuthPresFlag             TruthValue, 
+      bfdSessAuthenticationType       INTEGER 
+   } 
+    
+   bfdSessIndex  OBJECT-TYPE 
+      SYNTAX        BfdSessIndexTC 
+      MAX-ACCESS    not-accessible
+      STATUS        current 
+      DESCRIPTION 
+              "This object contains an index used to represent a 
+               unique BFD session on this device." 
+      ::= { bfdSessEntry 1 } 
+    
+   bfdSessApplicationId  OBJECT-TYPE 
+      SYNTAX        Unsigned32 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object contains an index used to indicate 
+               a local application which owns or maintains this 
+               BFD session. For instance, the MPLS VPN process may 
+               maintain a subset of the total number of BFD 
+               sessions.  This application ID provides a convenient 
+               way to segregate sessions by the applications which 
+               maintain them." 
+      ::= { bfdSessEntry 2 } 
+     
+   bfdSessDiscriminator            OBJECT-TYPE 
+      SYNTAX        Unsigned32 (1..4294967295) 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object specifies the local discriminator for this BFD  
+               session, used to uniquely identify it." 
+      ::= { bfdSessEntry 3 } 
+    
+   bfdSessRemoteDiscr OBJECT-TYPE 
+      SYNTAX        Unsigned32 (1..4294967295) 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object specifies the session discriminator chosen  
+               by the remote system for this BFD session." 
+      ::= { bfdSessEntry 4 } 
+    
+   bfdSessUdpPort OBJECT-TYPE 
+      SYNTAX      InetPortNumber 
+--      MAX-ACCESS  read-create 
+      MAX-ACCESS  read-only 
+      STATUS      current 
+      DESCRIPTION 
+              "The UDP Port for BFD. The default value is the 
+               well-known value for this port." 
+      REFERENCE 
+              "draft-katz-ward-bfd-02.txt and 
+               draft-raggarwa-mpls-bfd-00.txt" 
+      DEFVAL { 0 } 
+      ::= { bfdSessEntry 5 } 
+    
+   bfdSessState OBJECT-TYPE 
+      SYNTAX   INTEGER { 
+               adminDown(1),  
+               down(2),  
+               init(3),  
+               up(4)
+      } 
+      MAX-ACCESS   read-only 
+      STATUS   current 
+      DESCRIPTION 
+              "The perceived state of the BFD session." 
+      ::= { bfdSessEntry 6 } 
+    
+   bfdSessRemoteHeardFlag OBJECT-TYPE 
+      SYNTAX        TruthValue 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object specifies status of BFD packet reception from  
+               the remote system. Specifically, it is set to true(1) if 
+               the local system is actively receiving BFD packets from the  
+               remote system, and is set to false(0) if the local system  
+               has not received BFD packets recently (within the detection  
+               time) or if the local system is attempting to tear down 
+               the BFD session." 
+      ::= { bfdSessEntry 7 } 
+    
+   bfdSessDiag OBJECT-TYPE 
+      SYNTAX      Unsigned32 
+      MAX-ACCESS  accessible-for-notify 
+      STATUS      current 
+      DESCRIPTION 
+              "A diagnostic code specifying the local system's reason  
+               for the last transition of the session from up(1)  
+               to some other state." 
+      ::= { bfdSessEntry 8 } 
+
+   bfdSessOperMode OBJECT-TYPE 
+      SYNTAX   INTEGER { asyncModeWEchoFun(1),  
+                         asynchModeWOEchoFun(2),  
+                         demandModeWEchoFunction(3),  
+                         demandModeWOEchoFunction(4)  
+      } 
+      MAX-ACCESS   read-only 
+      STATUS   current 
+      DESCRIPTION 
+              "This object specifies current operating mode that BFD  
+               session is operating in. 
+        
+               A value of AsyncModeWEchoFun(1) ... 
+               A value of AsynchModeWOEchoFun(2) ... 
+               A value of DemandModeWEchoFunction(3) ... 
+               A value of DemandModeWOEchoFunction(4) ... 
+              " 
+      ::= { bfdSessEntry 9 } 
+    
+   bfdSessDemandModeDesiredFlag OBJECT-TYPE 
+      SYNTAX        TruthValue 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object indicates that the local system's  
+               desire to use Demand mode. Specifically, it is set  
+               to true(1) if the local system wishes to use  
+               Demand mode or false(0) if not" 
+      DEFVAL { false } 
+      ::= { bfdSessEntry 10 } 
+    
+   bfdSessEchoFuncModeDesiredFlag OBJECT-TYPE 
+      SYNTAX        TruthValue 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object indicates that the local system's  
+               desire to use Echo mode. Specifically, it is set  
+               to true(1) if the local system wishes to use  
+               Echo mode or false(0) if not" 
+      DEFVAL { false } 
+      ::= { bfdSessEntry 11 } 
+    
+   bfdSessControlPlanIndepFlag     OBJECT-TYPE 
+      SYNTAX        TruthValue 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object indicates that the local system's  
+               ability to continue to function through a disruption of  
+               the control plane. Specifically, it is set  
+               to true(1) if the local system BFD implementation is 
+               independent of the control plane. Otherwise, the  
+               value is set to false(0)" 
+      DEFVAL { false } 
+      ::= { bfdSessEntry 12 } 
+    
+   bfdSessAddrType  OBJECT-TYPE 
+      SYNTAX        InetAddressType 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+           "This object specifies IP address of the interface  
+            associated with this BFD session.  
+    
+            Only values unknown(0), ipv4(1) or ipv6(2) 
+            have to be supported.  
+    
+            A value of unknown(0) is allowed only when  
+            the outgoing interface is of type point-to-point, or 
+            when the BFD session is not associated with a specific  
+            interface. 
+    
+            If any other unsupported values are attempted in a set 
+            operation, the agent MUST return an inconsistentValue  
+            error. 
+      " 
+      ::= { bfdSessEntry 13 } 
+    
+   bfdSessAddr OBJECT-TYPE 
+      SYNTAX        InetAddress 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+           "This object specifies IP address of the interface  
+            associated with this BFD session.  
+            It can also be used to enabled BFD on a specific  
+            interface. The value is set to zero when BFD session is not  
+            associated with a specific interface. " 
+      ::= { bfdSessEntry 14 } 
+    
+   bfdSessDesiredMinTxInterval OBJECT-TYPE 
+      SYNTAX    BfdInterval 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS    current 
+      DESCRIPTION 
+       "This object specifies the minimum interval, in  
+        microseconds, that the local system would like to use when 
+             transmitting BFD Control packets." 
+      ::= { bfdSessEntry 15 } 
+    
+   bfdSessDesiredMinRxInterval OBJECT-TYPE 
+      SYNTAX        BfdInterval 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+            "This object specifies the minimum interval, in  
+             microseconds, between received  BFD Control packets the  
+             local system is capable of supporting." 
+      ::= { bfdSessEntry 16 } 
+    
+   bfdSessDesiredMinEchoRxInterval OBJECT-TYPE 
+      SYNTAX        BfdInterval 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+            "This object specifies the minimum interval, in  
+             microseconds, between received BFD Echo packets that this 
+             system is capable of supporting." 
+      ::= { bfdSessEntry 17 } 
+    
+   bfdSessDetectMult OBJECT-TYPE 
+      SYNTAX        Unsigned32 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+            "This object specifies the Detect time multiplier." 
+      ::= { bfdSessEntry 18 } 
+    
+   bfdSessStorType  OBJECT-TYPE 
+      SYNTAX        StorageType 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+          "This variable indicates the storage type for this 
+           object. Conceptual rows having the value  
+           'permanent' need not allow write-access to any  
+           columnar objects in the row."          
+      ::= { bfdSessEntry 19 } 
+    
+   bfdSessRowStatus OBJECT-TYPE 
+      SYNTAX        RowStatus 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+            "This variable is used to create, modify, and/or 
+             delete a row in this table. When a row in this 
+             table has a row in the active(1) state, no  
+             objects in this row can be modified except the 
+             bfdSessRowStatus and bfdSessStorageType." 
+      ::= { bfdSessEntry 20 } 
+    
+   bfdSessAuthPresFlag OBJECT-TYPE 
+      SYNTAX        TruthValue 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+              "This object indicates that the local system's  
+               desire to use Authentication. Specifically, it is set  
+               to true(1) if the local system wishes the session  
+               to be authenticated or false(0) if not" 
+      DEFVAL { false } 
+      ::= { bfdSessEntry 21 } 
+ 
+   bfdSessAuthenticationType OBJECT-TYPE 
+      SYNTAX      INTEGER { simplePassword(1),  
+                            keyedMD5(2),  
+                            meticulousKeyedMD5(3),  
+                            keyedSHA1(4),  
+                            meticulousKeyedSHA1(5) 
+      } 
+--      MAX-ACCESS    read-create 
+      MAX-ACCESS    read-only 
+      STATUS      current 
+      DESCRIPTION 
+           "The Authentication Type used for this BFD session. This 
+            field is valid only when the Authentication Present bit is set" 
+      ::= { bfdSessEntry 22 } 
+ 
+   -- BFD Session Performance Table 
+    
+   bfdSessPerfTable OBJECT-TYPE 
+      SYNTAX        SEQUENCE OF BfdSessPerfEntry 
+      MAX-ACCESS    not-accessible 
+      STATUS        current 
+      DESCRIPTION 
+          "This table specifies BFD Session performance counters." 
+      ::= { bfdObjects 3 } 
+    
+   bfdSessPerfEntry OBJECT-TYPE 
+      SYNTAX        BfdSessPerfEntry 
+      MAX-ACCESS    not-accessible 
+      STATUS        current 
+      DESCRIPTION 
+          "An entry in this table is created by a BFD-enabled node for  
+           every BFD Session. bfdCounterDiscontinuityTime is used to  
+           indicate potential discontinuity for all counter objects  
+           in this table." 
+      AUGMENTS    { bfdSessEntry } 
+      ::= { bfdSessPerfTable 1 } 
+    
+   BfdSessPerfEntry ::= SEQUENCE { 
+     bfdSessPerfPktIn               Counter32,  
+     bfdSessPerfPktOut              Counter32, 
+     bfdSessUpTime                  TimeStamp,  
+     bfdSessPerfLastSessDownTime    TimeStamp, 
+     bfdSessPerfLastCommLostDiag    BfdDiag, 
+     bfdSessPerfSessUpCount         Counter32, 
+     bfdSessPerfDiscTime            TimeStamp, 
+    
+     -- High Capacity Counters 
+     bfdSessPerfPktInHC             Counter64,  
+     bfdSessPerfPktOutHC            Counter64 
+     } 
+    
+   -- Ed Note: should we add per-diag code counts here,  
+    
+   bfdSessPerfPktIn OBJECT-TYPE  
+      SYNTAX      Counter32 
+      MAX-ACCESS  read-only 
+      STATUS      current 
+      DESCRIPTION 
+           "The total number of BFD messages received for this BFD 
+   session." 
+      ::= { bfdSessPerfEntry 1 } 
+    
+   bfdSessPerfPktOut OBJECT-TYPE 
+      SYNTAX      Counter32 
+      MAX-ACCESS  read-only 
+      STATUS      current 
+      DESCRIPTION 
+           "The total number of BFD messages sent for this BFD session." 
+      ::= { bfdSessPerfEntry 2 } 
+    
+   bfdSessUpTime OBJECT-TYPE 
+      SYNTAX       TimeStamp 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+           "The value of sysUpTime on the most recent occasion at which 
+            the session came up. If no such up event exists this object 
+            contains a zero value." 
+      ::= { bfdSessPerfEntry 3 } 
+ 
+   bfdSessPerfLastSessDownTime OBJECT-TYPE 
+      SYNTAX       TimeStamp 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+           "The value of sysUpTime on the most recent occasion at which 
+            the last time communication was lost with the neighbor. If  
+            no such down event exist this object contains a zero value." 
+      ::= { bfdSessPerfEntry 4 } 
+    
+   bfdSessPerfLastCommLostDiag  OBJECT-TYPE 
+      SYNTAX       BfdDiag 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+           "The BFD diag code for the last time communication was lost  
+            with the neighbor. If no such down event exists this object  
+            contains a zero value." 
+      ::= { bfdSessPerfEntry 5 }     
+    
+   bfdSessPerfSessUpCount OBJECT-TYPE 
+      SYNTAX       Counter32 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+           "The number of times this session has gone into the Up 
+            state since the router last rebooted." 
+      ::= { bfdSessPerfEntry 6 } 
+    
+   bfdSessPerfDiscTime OBJECT-TYPE 
+      SYNTAX       TimeStamp 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+         "The value of sysUpTime on the most recent occasion at 
+          which any one or more of the session counters suffered 
+          a discontinuity.  
+
+          The relevant counters are the specific instances associated  
+          with this BFD session of any Counter32 object contained in 
+          the BfdSessPerfTable. If no such discontinuities have occurred  
+          since the last re-initialization of the local management 
+          subsystem, then this object contains a zero value." 
+      ::= { bfdSessPerfEntry 7 } 
+
+   bfdSessPerfPktInHC OBJECT-TYPE  
+      SYNTAX       Counter64 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+           "This value represents the total number of BFD messages 
+            received for this BFD session. It MUST be equal to the 
+            least significant 32 bits of bfdSessPerfPktIn 
+            if bfdSessPerfPktInHC is supported according to 
+            the rules spelled out in RFC2863." 
+      ::= { bfdSessPerfEntry 8 } 
+    
+   bfdSessPerfPktOutHC OBJECT-TYPE 
+      SYNTAX       Counter64 
+      MAX-ACCESS   read-only 
+      STATUS       current 
+      DESCRIPTION 
+           "This value represents the total number of  
+            total number of BFD messages transmitted for this  
+            BFD session. It MUST be equal to the 
+           least significant 32 bits of bfdSessPerfPktIn 
+           if bfdSessPerfPktOutHC is supported according to 
+           the rules spelled out in RFC2863." 
+      ::= { bfdSessPerfEntry 9 } 
+    
+    
+   -- BFD Session Mapping Table 
+    
+   bfdSessMapTable OBJECT-TYPE 
+      SYNTAX   SEQUENCE OF BfdSessMapEntry 
+      MAX-ACCESS   not-accessible 
+      STATUS   current 
+      DESCRIPTION 
+              "The BFD Session Mapping Table maps the complex 
+               indexing of the BFD sessions to the flat 
+               BFDIndex used in the BfdSessionTable. 
+    
+               Implementors need to be aware that if the value of 
+               the bfdSessAddr (an OID) has more  
+               that 111 sub-identifiers, then OIDs of column 
+               instances in this table will have more than 128 
+               sub-identifiers and cannot be accessed using SNMPv1, 
+               SNMPv2c, or SNMPv3. 
+              " 
+      REFERENCE 
+              "BFD Version 0 (draft-katz-ward-bfd-02.txt)" 
+      ::= { bfdObjects 4 } 
+    
+   bfdSessMapEntry OBJECT-TYPE 
+      SYNTAX   BfdSessMapEntry 
+      MAX-ACCESS   not-accessible 
+      STATUS   current 
+      DESCRIPTION 
+              "The BFD Session Entry describes BFD session 
+               that is mapped to this index.
+
+               Implementors need to be aware that if the value of
+               the mplsInSegmentMapLabelPtrIndex (an OID) has more
+               that 111 sub-identifiers, then OIDs of column
+               instances in this table will have more than 128
+               sub-identifiers and cannot be accessed using SNMPv1,
+               SNMPv2c, or SNMPv3." 
+      INDEX { bfdSessApplicationId, 
+              bfdSessDiscriminator, 
+              bfdSessAddrType, 
+              bfdSessAddr 
+            } 
+      ::= { bfdSessMapTable 1 } 
+    
+   BfdSessMapEntry ::= SEQUENCE { 
+      bfdSessMapBfdIndex            BfdSessIndexTC 
+   } 
+    
+   bfdSessMapBfdIndex OBJECT-TYPE 
+      SYNTAX        BfdSessIndexTC 
+      MAX-ACCESS    read-only 
+      STATUS        current 
+      DESCRIPTION 
+          "This object specifies the BfdIndex referred to by 
+           the indexes of this row. In essence, a mapping is 
+           provided between these indexes and the BfdSessTable." 
+      ::= { bfdSessMapEntry 1 } 
+    
+   -- Notification Configuration 
+    
+   bfdSessNotificationsEnable OBJECT-TYPE 
+      SYNTAX        TruthValue 
+--      MAX-ACCESS   read-write 
+      MAX-ACCESS   read-only 
+      STATUS        current 
+      DESCRIPTION 
+          "If this object is set to true(1), then it enables 
+           the emission of bfdSessUp and bfdSessDown 
+           notifications; otherwise these notifications are not 
+           emitted." 
+      REFERENCE 
+          "See also RFC3413 for explanation that  
+           notifications are under the ultimate control of the  
+           MIB modules in this document." 
+      DEFVAL { false } 
+      ::= { bfdScalarObjects 4 } 
+    
+   bfdSessUp NOTIFICATION-TYPE 
+      OBJECTS     { bfdSessDiag, -- low range value 
+                    bfdSessDiag  -- high range value 
+      } 
+      STATUS      current 
+      DESCRIPTION 
+          "This notification is generated when the 
+           bfdSessState object for one or more contiguous 
+           entries in bfdSessTable are about to enter the up(2) 
+           state from some other state. The included values of 
+           bfdSessDiag MUST both be set equal to this 
+           new state (i.e: up(1)).  The two instances of  
+           bfdSessDiag in this notification indicate the range  
+           of indexes that are affected.  Note that all the indexes  
+           of the two ends of the range can be derived from the 
+           instance identifiers of these two objects.  For the 
+           cases where a contiguous range of sessions 
+           have transitioned into the up(1) state at roughly 
+           the same time, the device SHOULD issue a single 
+           notification for each range of contiguous indexes in 
+           an effort to minimize the emission of a large number 
+           of notifications.  If a notification has to be 
+           issued for just a single bfdSessEntry, then 
+           the instance identifier (and values) of the two 
+           bfdSessDiag objects MUST be the identical." 
+      ::= { bfdNotifications 1 } 
+    
+   bfdSessDown NOTIFICATION-TYPE 
+      OBJECTS     { bfdSessDiag, -- low range value 
+                    bfdSessDiag  -- high range value 
+      } 
+      STATUS      current 
+      DESCRIPTION 
+          "This notification is generated when the 
+           bfdSessState object for one or more contiguous 
+           entries in bfdSessTable are about to enter the down(4) 
+           or adminDown(5) states from some other state. The included  
+           values of bfdSessDiag MUST both be set equal to this 
+           new state (i.e: down(4) or adminDown(5)).  The two instances  
+           of bfdSessDiag in this notification indicate the range  
+           of indexes that are affected.  Note that all the indexes  
+           of the two ends of the range can be derived from the 
+           instance identifiers of these two objects.  For 
+           cases where a contiguous range of sessions 
+           have transitioned into the down(4) or adminDown(5) states  
+           at roughly the same time, the device SHOULD issue a single 
+           notification for each range of contiguous indexes in 
+           an effort to minimize the emission of a large number 
+           of notifications.  If a notification has to be 
+           issued for just a single bfdSessEntry, then 
+           the instance identifier (and values) of the two 
+           bfdSessDiag objects MUST be the identical." 
+      ::= { bfdNotifications 2 } 
+    
+   -- Ed Note: We need to add notification for changes  
+   -- when the two ends automatically negotiate to a new detection time 
+   -- value or when detection multiplier changes.  
+   -- Similarly, changes in the operating mode (bfdSessOperMode)  
+   -- also need to be notified.  
+    
+   -- Module compliance. 
+ 
+   bfdGroups 
+      OBJECT IDENTIFIER ::= { bfdConformance 1 } 
+    
+   bfdCompliances 
+      OBJECT IDENTIFIER ::= { bfdConformance 2 } 
+    
+   -- Compliance requirement for fully compliant implementations.  
+    
+   bfdModuleFullCompliance MODULE-COMPLIANCE 
+      STATUS       current 
+      DESCRIPTION "Compliance statement for agents that provide full 
+                   support for BFD-MIB. Such devices can 
+                   then be monitored and also be configured using 
+                   this MIB module." 
+    
+      MODULE -- This module. 
+      MANDATORY-GROUPS { 
+            bfdSessionGroup, 
+            bfdSessionPerfGroup, 
+            bfdSessionPerfHCGroup, 
+            bfdNotificationGroup 
+      } 
+    
+--      GROUP        bfdSessionPerfHCGroup 
+--      DESCRIPTION "This group is mandatory for those bfdPerfTable  
+--                   entries for which any of the objects  
+--                   bfdSessPerfPktInHC or bfdSessPerfPktOutHC  
+--                   wraps around too quickly  
+--                   based on the criteria specified in RFC 2863 for  
+--                   high-capacity counters." 
+--    
+--      GROUP        bfdNotificationGroup 
+--      DESCRIPTION "This group is only mandatory for those  
+--                   implementations which can efficiently implement  
+--                   the notifications contained in this group." 
+--    
+      OBJECT       bfdSessAddrType 
+      SYNTAX       InetAddressType {
+                                    unknown(0),
+                                    ipv4(1),
+                                    ipv6(2)
+                                    }
+      DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support  
+                   is required." 
+    
+      OBJECT       bfdSessAddr 
+      SYNTAX       InetAddress (SIZE(0|4|16)) 
+      DESCRIPTION "An implementation is only required to support  
+                   unknown(0), ipv4(1) and ipv6(2) sizes." 
+ 
+      ::= { bfdCompliances 1 } 
+    
+   -- Read-Only Conformance TBD... 
+    
+    
+   -- Units of conformance. 
+    
+   bfdSessionGroup OBJECT-GROUP 
+      OBJECTS { 
+                bfdSessNotificationsEnable, 
+                bfdAdminStatus, 
+                bfdVersionNumber, 
+                bfdSessApplicationId,  
+                bfdSessDiscriminator,             
+                bfdSessAddrType, 
+                bfdSessAddr,                      
+                bfdSessRemoteDiscr,               
+                bfdSessUdpPort,
+                bfdSessState,                     
+                bfdSessRemoteHeardFlag,           
+                bfdSessDiag,                      
+                bfdSessOperMode,                  
+                bfdSessDemandModeDesiredFlag,     
+                bfdSessEchoFuncModeDesiredFlag, 
+                bfdSessControlPlanIndepFlag, 
+                bfdSessDesiredMinTxInterval,      
+                bfdSessDesiredMinRxInterval,      
+                bfdSessDesiredMinEchoRxInterval,  
+                bfdSessDetectMult,                
+                bfdSessStorType,                 
+                bfdSessRowStatus, 
+                bfdSessMapBfdIndex,  
+                bfdSessAuthPresFlag,  
+                bfdSessAuthenticationType 
+      } 
+      STATUS  current 
+      DESCRIPTION 
+             "Collection of objects needed for BFD sessions." 
+      ::= { bfdGroups 1 } 
+    
+    
+   bfdSessionPerfGroup OBJECT-GROUP 
+      OBJECTS { 
+                bfdSessPerfPktIn, 
+                bfdSessPerfPktOut, 
+                bfdSessUpTime,
+                bfdSessPerfLastSessDownTime, 
+                bfdSessPerfLastCommLostDiag, 
+                bfdSessPerfSessUpCount,
+                bfdSessPerfDiscTime 
+      } 
+      STATUS  current 
+      DESCRIPTION 
+             "Collection of objects needed to monitor the 
+              performance of BFD sessions." 
+      ::= { bfdGroups 2 } 
+    
+   bfdSessionPerfHCGroup OBJECT-GROUP 
+      OBJECTS { 
+               bfdSessPerfPktInHC, 
+               bfdSessPerfPktOutHC  
+      } 
+      STATUS  current 
+      DESCRIPTION 
+             "Collection of objects needed to monitor the 
+              performance of BFD sessions for which the 
+              values of bfdSessPerfPktIn, bfdSessPerfPktOut  
+              wrap around too quickly." 
+      ::= { bfdGroups 3 } 
+    
+   bfdNotificationGroup NOTIFICATION-GROUP 
+      NOTIFICATIONS { 
+                bfdSessUp, 
+                bfdSessDown 
+      } 
+      STATUS  current 
+      DESCRIPTION 
+             "Set of notifications implemented in this  
+              module." 
+
+      ::= { bfdGroups 4 }          
+    
+   END 
+

mibs/juniper/JNX-DOT3OAM-CAPABILITY

@@ -0,0 +1,135 @@
+-- *****************************************************************
+-- JNX-DOT3OAM-CAPABILITY.mib: Juniper DOT3-OAM-MIB AGENT-CAPABILITIES
+--
+-- Copyright (c) 2015, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+JNX-DOT3OAM-CAPABILITY DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY
+                FROM SNMPv2-SMI
+        AGENT-CAPABILITIES
+                FROM SNMPv2-CONF
+        jnxAgentCapability
+                FROM JUNIPER-SMI;   
+
+jnxDot3OamCapability MODULE-IDENTITY
+    LAST-UPDATED "201507250000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+             E-mail: support@juniper.net"
+
+    DESCRIPTION
+       "Agent capabilities for DOT3-OAM-MIB (RFC4878)"
+    ::= { jnxAgentCapability 6 }
+
+
+jnxDot3OamCapJunos AGENT-CAPABILITIES
+
+    PRODUCT-RELEASE "All JUNOS Version"
+    STATUS          current
+    DESCRIPTION     "DOT3-OAM MIB capabilities"
+
+    SUPPORTS        DOT3-OAM-MIB
+    INCLUDES        {
+                      dot3OamControlGroup, dot3OamPeerGroup,
+                      dot3OamStatsBaseGroup, dot3OamLoopbackGroup,
+                      dot3OamErrSymbolPeriodEventGroup,
+                      dot3OamErrFramePeriodEventGroup,
+                      dot3OamErrFrameEventGroup,
+                      dot3OamErrFrameSecsSummaryEventGroup,
+                      dot3OamFlagEventGroup, dot3OamEventLogGroup,
+                      dot3OamNotificationGroup
+                    }
+
+    VARIATION       dot3OamAdminState
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamMode
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamLoopbackStatus
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamLoopbackIgnoreRx
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrSymPeriodWindowHi
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrSymPeriodWindowLo
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrSymPeriodThresholdHi
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrSymPeriodThresholdLo
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrSymPeriodEvNotifEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFramePeriodWindow
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFramePeriodThreshold
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFramePeriodEvNotifEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFramePeriodEvNotifEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFrameThreshold
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFrameEvNotifEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFrameSecsSummaryWindow
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFrameSecsSummaryThreshold
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamErrFrameSecsEvNotifEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamDyingGaspEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       dot3OamCriticalEventEnable
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    ::= { jnxDot3OamCapability 1 } 
+ 
+END
+

mibs/juniper/JNX-IF-CAPABILITY

@@ -0,0 +1,84 @@
+-- *****************************************************************
+-- JNX-IF-CAPABILITY.mib: Juniper IF-MIB AGENT-CAPABILITIES
+--
+-- Copyright (c) 2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+JNX-IF-CAPABILITY DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY
+                FROM SNMPv2-SMI
+        AGENT-CAPABILITIES
+                FROM SNMPv2-CONF
+        jnxAgentCapability
+                FROM JUNIPER-SMI;   
+
+jnxIfCapability MODULE-IDENTITY
+    LAST-UPDATED "201306180000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+             E-mail: support@juniper.net"
+
+    DESCRIPTION
+       "Agent capabilities for IF-MIB (RFC2863)"
+    ::= { jnxAgentCapability 1 }
+
+
+jnxIfCapJunos AGENT-CAPABILITIES
+
+    PRODUCT-RELEASE "All JUNOS Version"
+    STATUS          current
+    DESCRIPTION     "IF MIB capabilities"
+
+    SUPPORTS        IF-MIB
+    INCLUDES        { ifGeneralInformationGroup, ifStackGroup2,
+                      ifOldObjectsGroup, linkUpDownNotificationsGroup,
+                      ifVHCPacketGroup, ifCounterDiscontinuityGroup}
+
+    VARIATION       ifDescr
+    ACCESS          read-only
+    DESCRIPTION     "The ifDescr showed interface name by default."
+
+    VARIATION       ifAdminStatus
+    SYNTAX          INTEGER {
+                        up(1),       -- ready to pass packets
+                        down(2)
+                    }
+    -- no           { testing(3)}  in some test mode
+    ACCESS          read-only
+    DESCRIPTION     "status testing is not supported."
+
+    VARIATION       ifOperStatus
+    SYNTAX          INTEGER { 
+                        up(1),
+                        down(2),
+                        lowerLayerDown(7)
+                    
+                    }
+    -- no           { testing(3), unknown(4), dormant(5), notPresent(6)}
+    ACCESS          read-only
+    DESCRIPTION     "support up, down, lowerlayerDown states."
+
+    VARIATION       ifLinkUpDownTrapEnable
+    ACCESS          read-only
+    DESCRIPTION
+            "Write access is not supported."
+
+    VARIATION       ifPromiscuousMode
+    ACCESS          read-only
+    DESCRIPTION     "Write access is not supported."
+
+    VARIATION       ifStackStatus
+    ACCESS          read-only
+    DESCRIPTION     "Write or create access is not supported."
+
+    ::= { jnxIfCapability 1 } 
+ 
+END

mibs/juniper/JNX-IP-CAPABILITY

@@ -0,0 +1,87 @@
+-- *****************************************************************
+-- JNX-IP-CAPABILITY.mib: Juniper IP-MIB AGENT-CAPABILITIES
+--
+-- Copyright (c) 2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+JNX-IP-CAPABILITY DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY
+        FROM SNMPv2-SMI
+    AGENT-CAPABILITIES
+        FROM SNMPv2-CONF
+    jnxAgentCapability
+        FROM JUNIPER-SMI;
+
+
+jnxIpCapability MODULE-IDENTITY
+    LAST-UPDATED    "201306180000Z"
+    ORGANIZATION    "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+             E-mail: support@juniper.net"
+
+    DESCRIPTION
+        "The capabilities description of IP-MIB."
+    ::= { jnxAgentCapability 3 }
+
+
+
+jnxIpCapJunos AGENT-CAPABILITIES
+    PRODUCT-RELEASE "All JUNOS Version"
+    STATUS          current
+    DESCRIPTION
+        "IP-MIB capabilities."
+
+    SUPPORTS        IP-MIB
+    INCLUDES        {
+                        ipSystemStatsGroup,
+                        ipAddressGroup,
+                        ipNetToPhysicalGroup,
+                        icmpStatsGroup,
+                        ipGroup,
+                        icmpGroup
+                    }
+
+    VARIATION       ipForwarding
+    ACCESS          read-only
+    DESCRIPTION     "Write is not supported."
+
+    VARIATION       ipDefaultTTL
+    ACCESS          read-only
+    DESCRIPTION     "Write is not supported."
+    
+    VARIATION       ipSystemStatsInBcastPkts
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       ipSystemStatsHCInBcastPkts
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       ipSystemStatsOutBcastPkts
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       ipSystemStatsHCOutBcastPkts
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       ipAddressSpinLock
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    ::= { jnxIpCapability 1 }
+
+END

mibs/juniper/JNX-IPSEC-MONITOR-MIB

@@ -0,0 +1,944 @@
+JNX-IPSEC-MONITOR-MIB DEFINITIONS ::= BEGIN
+
+      IMPORTS
+         MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Integer32, Unsigned32
+           FROM SNMPv2-SMI
+         InetAddress, InetAddressType
+           FROM INET-ADDRESS-MIB
+         TEXTUAL-CONVENTION, DisplayString, TimeInterval
+           FROM SNMPv2-TC
+         jnxMibs
+           FROM JUNIPER-SMI
+        jnxSpSvcSetName 
+           FROM JUNIPER-SP-MIB
+        JnxIkePeerRole, JnxIkePeerType, JnxIkeNegoMode, JnxDiffHellmanGrp, JnxEncryptAlgo, 
+        JnxIkeAuthMethod, JnxKeyType, JnxRemotePeerType, JnxSAType, JnxIkeHashAlgo, JnxEncapMode, JnxAuthAlgo
+           FROM JUNIPER-IPSEC-FLOW-MON-MIB;
+      jnxIpSecMonitorMIB MODULE-IDENTITY
+         LAST-UPDATED "201605310000Z"     -- Tue May  31 00:00:00 2016 UTC      
+         ORGANIZATION "Juniper Networks, Inc."
+         CONTACT-INFO
+                "Juniper Technical Assistance Center
+                      Juniper Networks, Inc.
+                      1133 Innovation Way
+                      Sunnyvale, CA 94089
+                      E-mail: support@juniper.net"
+
+	 DESCRIPTION " "
+
+         REVISION "201202102100Z"
+         DESCRIPTION
+                   "Initial version implements only the following
+                    tables:
+                    - IKE tunnel table
+                    - IPSec tunnel table
+                    - IPSec security associations table
+                    "
+         REVISION    "201605310000Z" -- 31-May-16
+         DESCRIPTION
+                     "Consolidated TC duplicated b/n jnx-ipsec-flow-mon.mib, jnx-ipsec-monitor-asp.mib"
+
+         ::= { jnxMibs 22 } 
+
+
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- Local Textual Conventions
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++
+
+      JnxIkeNegState ::= TEXTUAL-CONVENTION
+         STATUS     current
+         DESCRIPTION
+            "State of the Phase-1 IKE negotiation."
+         SYNTAX INTEGER {
+                   matured(1),
+                   notmatured(2)
+         }
+
+      JnxSpi  ::= TEXTUAL-CONVENTION
+         STATUS     current
+         DESCRIPTION
+            "The type of the SPI associated with IPsec Phase-2 security
+            associations."
+         SYNTAX Unsigned32 (256..4294967295)
+      -- Umesh  SYNTAX INTEGER (256..4294967295)
+
+      
+
+
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- IPsec MIB Object Groups
+   --
+   -- This MIB module contains the following groups:
+   -- 1) IPsec Levels Group
+   -- 2) IPsec Phase-1 Group
+   -- 3) IPsec Phase-2 Group
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+      jnxIpSecMIBObjects OBJECT IDENTIFIER  
+	                 ::= {jnxIpSecMonitorMIB 1}
+      jnxIpSecLevels OBJECT IDENTIFIER
+                     ::= { jnxIpSecMIBObjects 1 }
+      jnxIpSecPhaseOne OBJECT IDENTIFIER
+                     ::= { jnxIpSecMIBObjects 2 }
+      jnxIpSecPhaseTwo OBJECT IDENTIFIER
+                     ::= { jnxIpSecMIBObjects 3 }
+
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- IPsec Levels Group
+   --
+   -- This group consists of a:
+   -- 1) IPsec MIB Level
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+      jnxIpSecMibLevel OBJECT-TYPE
+         SYNTAX Integer32 (1..4096)
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The version of the IPsec MIB."
+         ::= { jnxIpSecLevels 1 }
+
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- The IPsec Phase-1 Internet Key Exchange Tunnel Table
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   
+      jnxIkeTunnelTable OBJECT-TYPE
+         SYNTAX SEQUENCE OF JnxIkeTunnelEntry
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The IPsec Phase-1 Internet Key Exchange Tunnel Table.
+             There is one entry in this table for each active IPsec
+             Phase-1 IKE Tunnel."
+        ::= { jnxIpSecPhaseOne 1 }
+
+      jnxIkeTunnelEntry OBJECT-TYPE
+         SYNTAX JnxIkeTunnelEntry
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+               "Each entry contains the attributes associated with
+                an active IPsec Phase-1 IKE Tunnel."
+         INDEX { jnxSpSvcSetName, -- From the jnxSpSvcSetTable
+                 jnxIkeTunRemoteGwAddrType,
+                 jnxIkeTunRemoteGwAddr,
+                 jnxIkeTunIndex }
+         ::= { jnxIkeTunnelTable 1}
+
+      JnxIkeTunnelEntry ::= SEQUENCE {
+         jnxIkeTunIndex                 Integer32,
+         jnxIkeTunLocalRole             JnxIkePeerRole,    
+         jnxIkeTunNegState              JnxIkeNegState,    
+         jnxIkeTunInitiatorCookie       DisplayString,
+         jnxIkeTunResponderCookie       DisplayString,
+
+         jnxIkeTunLocalIdType           JnxIkePeerType,
+         jnxIkeTunLocalIdValue          DisplayString,
+         jnxIkeTunLocalGwAddrType       InetAddressType,
+         jnxIkeTunLocalGwAddr           InetAddress,
+         jnxIkeTunLocalCertName         DisplayString,
+         jnxIkeTunRemoteIdType          JnxIkePeerType,
+         jnxIkeTunRemoteIdValue         DisplayString,
+         jnxIkeTunRemoteGwAddrType      InetAddressType,
+         jnxIkeTunRemoteGwAddr          InetAddress,
+         jnxIkeTunNegoMode              JnxIkeNegoMode,
+         jnxIkeTunDiffHellmanGrp        JnxDiffHellmanGrp,
+         jnxIkeTunEncryptAlgo           JnxEncryptAlgo,
+         jnxIkeTunHashAlgo              JnxIkeHashAlgo,
+         jnxIkeTunAuthMethod            JnxIkeAuthMethod,
+         jnxIkeTunLifeTime              Integer32,
+         jnxIkeTunActiveTime            TimeInterval,
+
+         jnxIkeTunInOctets              Counter64,
+         jnxIkeTunInPkts                Counter32,
+         jnxIkeTunOutOctets             Counter64,
+         jnxIkeTunOutPkts               Counter32
+      }
+
+      jnxIkeTunIndex OBJECT-TYPE
+         SYNTAX Integer32 (1..2147483647)
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The index of the IPsec Phase-1 IKE Tunnel Table.
+             The value of the index is a number which begins
+             at one and is incremented with each tunnel that
+             is created. The value of this object will
+             wrap at 2,147,483,647."
+         ::= { jnxIkeTunnelEntry 1 }
+
+      jnxIkeTunLocalRole OBJECT-TYPE
+         SYNTAX JnxIkePeerRole
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The role of local peer identity.  The Role of 
+			the local peer can be:
+             1. initiator.
+             2. or responder."
+         ::= { jnxIkeTunnelEntry 2 }
+
+      jnxIkeTunNegState OBJECT-TYPE
+         SYNTAX JnxIkeNegState
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The state of the current negotiation , It can be 
+			1. matured
+			2. not matured "
+         ::= { jnxIkeTunnelEntry 3 }
+		 
+      jnxIkeTunInitiatorCookie OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Cookie as generated by the peer that initiated the IKE Phase-1
+             negotiation. This cookie is carried in the ISAKMP header."
+         ::= { jnxIkeTunnelEntry 4 }
+
+      jnxIkeTunResponderCookie OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Cookie as generated by the peer responding to the IKE Phase-1
+             negotiation initiated by the remote peer. This cookie is carried
+             in the ISAKMP header."
+         ::= { jnxIkeTunnelEntry 5 }
+		 
+      jnxIkeTunLocalIdType OBJECT-TYPE
+         SYNTAX JnxIkePeerType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The type of local peer identity.  The local
+            peer may be identified by:
+             1. an IP address, or
+             2. or a fully qualified domain name string.
+             3. or a distinguished name string."
+         ::= { jnxIkeTunnelEntry 6 }
+
+      jnxIkeTunLocalIdValue OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The value of the local peer identity.
+
+             If the local peer type is an IP Address, then this
+             is the IP Address used to identify the local peer.
+
+             If the local peer type is id_fqdn, then this is
+             the FQDN of the remote peer.
+
+             If the local peer type is a id_dn, then this is
+             the distinguished name string of the local peer."
+         ::= { jnxIkeTunnelEntry 7 }
+
+      jnxIkeTunLocalGwAddrType OBJECT-TYPE
+         SYNTAX InetAddressType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address type of the local endpoint (gateway) for the IPsec
+             Phase-1 IKE Tunnel."
+         ::= { jnxIkeTunnelEntry 8 }
+
+      jnxIkeTunLocalGwAddr OBJECT-TYPE
+         SYNTAX InetAddress
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address of the local endpoint (gateway) for the IPsec
+             Phase-1 IKE Tunnel."
+         ::= { jnxIkeTunnelEntry 9 }
+
+      jnxIkeTunLocalCertName OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "Name of the certificate used for authentication of the local
+             tunnel endpoint. This object will have some valid value only
+             if negotiated IKE authentication method is other than pre-saherd
+             key. If the IKE negotiation do not use certificate based
+             authentication method, then the value of this object will be a
+             NULL string."  
+         ::= { jnxIkeTunnelEntry 10 }
+
+      jnxIkeTunRemoteIdType OBJECT-TYPE
+         SYNTAX JnxIkePeerType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The type of remote peer identity.
+            The remote peer may be identified by:
+             1. an IP address, or
+             2. or a fully qualified domain name string.
+             3. or a distinguished name string."
+         ::= { jnxIkeTunnelEntry 11 }
+
+      jnxIkeTunRemoteIdValue OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The value of the remote peer identity.
+
+             If the remote peer type is an IP Address, then this
+             is the IP Address used to identify the remote peer.
+
+             If the remote peer type is id_fqdn, then this is
+             the FQDN of the remote peer.
+
+             If the remote peer type is a id_dn, then this is
+             the distinguished named string of the remote peer."
+         ::= { jnxIkeTunnelEntry 12 }
+
+      jnxIkeTunRemoteGwAddrType OBJECT-TYPE
+         SYNTAX InetAddressType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address type of the remote gateway (endpoint) for the IPsec
+             Phase-1 IKE Tunnel."
+         ::= { jnxIkeTunnelEntry 13 }
+
+      jnxIkeTunRemoteGwAddr OBJECT-TYPE
+         SYNTAX InetAddress
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address of the remote gateway (endpoint) for the IPsec
+             Phase-1 IKE Tunnel."
+         ::= { jnxIkeTunnelEntry 14 }
+
+      jnxIkeTunNegoMode OBJECT-TYPE
+         SYNTAX JnxIkeNegoMode
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The negotiation mode of the IPsec Phase-1 IKE Tunnel."
+         ::= { jnxIkeTunnelEntry 15 }
+
+      jnxIkeTunDiffHellmanGrp OBJECT-TYPE
+         SYNTAX JnxDiffHellmanGrp
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The Diffie Hellman Group used in IPsec Phase-1 IKE
+             negotiations."
+         ::= { jnxIkeTunnelEntry 16 }
+
+      jnxIkeTunEncryptAlgo OBJECT-TYPE
+         SYNTAX JnxEncryptAlgo
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The encryption algorithm used in IPsec Phase-1 IKE
+             negotiations."
+         ::= { jnxIkeTunnelEntry 17 }
+
+      jnxIkeTunHashAlgo OBJECT-TYPE
+         SYNTAX JnxIkeHashAlgo
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The hash algorithm used in IPsec Phase-1 IKE
+             negotiations."
+         ::= { jnxIkeTunnelEntry 18 }
+
+      jnxIkeTunAuthMethod OBJECT-TYPE
+         SYNTAX JnxIkeAuthMethod
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The authentication method used in IPsec Phase-1 IKE
+             negotiations."
+         ::= { jnxIkeTunnelEntry 19 }
+
+      jnxIkeTunLifeTime OBJECT-TYPE
+         SYNTAX Integer32 (1..2147483647)
+         UNITS "seconds"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel
+             in seconds."
+         ::= { jnxIkeTunnelEntry 20 }
+
+      jnxIkeTunActiveTime OBJECT-TYPE
+         SYNTAX TimeInterval
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The length of time the IPsec Phase-1 IKE tunnel has been
+             active in hundredths of seconds."
+         ::= { jnxIkeTunnelEntry 21 }
+
+      jnxIkeTunInOctets OBJECT-TYPE
+         SYNTAX Counter64
+         UNITS "Octets"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The total number of octets received by
+            this IPsec Phase-1 IKE security association."
+         ::= { jnxIkeTunnelEntry 22 }
+
+      jnxIkeTunInPkts OBJECT-TYPE
+         SYNTAX Counter32
+         UNITS "Packets"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The total number of packets received by
+            this IPsec Phase-1 IKE security association."
+         ::= { jnxIkeTunnelEntry 23 }
+
+      jnxIkeTunOutOctets OBJECT-TYPE
+         SYNTAX Counter64
+         UNITS "Octets"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The total number of octets sent by this IPsec Phase-1
+             IKE security association."
+         ::= { jnxIkeTunnelEntry 24 }
+
+      jnxIkeTunOutPkts OBJECT-TYPE
+         SYNTAX Counter32
+         UNITS "Packets"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The total number of packets sent by this IPsec Phase-1
+             IKE security association."
+         ::= { jnxIkeTunnelEntry 25 }
+
+
+
+
+
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- The IPsec Phase-2 Tunnel Table
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+      jnxIpSecTunnelTable OBJECT-TYPE
+         SYNTAX SEQUENCE OF JnxIpSecTunnelEntry
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The IPsec Phase-2 Tunnel Table.
+            There is one entry in this table for
+            each active IPsec Phase-2 Tunnel."
+         ::= { jnxIpSecPhaseTwo 1 }
+
+      jnxIpSecTunnelEntry OBJECT-TYPE
+         SYNTAX JnxIpSecTunnelEntry
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "Each entry contains the attributes
+            associated with an active IPsec Phase-2 Tunnel."
+         INDEX {jnxSpSvcSetName, -- From the jnxSpSvcSetTable
+                jnxIpSecTunRemoteGwAddrType,
+                jnxIpSecTunRemoteGwAddr,
+                jnxIpSecTunIndex }
+         ::= { jnxIpSecTunnelTable 1 }
+
+      JnxIpSecTunnelEntry ::= SEQUENCE {
+         jnxIpSecTunIndex                Integer32,
+         jnxIpSecRuleName                DisplayString,
+         jnxIpSecTermName                DisplayString,
+         jnxIpSecTunLocalGwAddrType      InetAddressType,
+         jnxIpSecTunLocalGwAddr          InetAddress,
+         jnxIpSecTunRemoteGwAddrType     InetAddressType,
+         jnxIpSecTunRemoteGwAddr         InetAddress,
+         jnxIpSecTunLocalProxyId         DisplayString,
+         jnxIpSecTunRemoteProxyId        DisplayString,
+         jnxIpSecTunKeyType              JnxKeyType,
+         jnxIpSecRemotePeerType          JnxRemotePeerType,   
+         jnxIpSecTunMtu                  Integer32,
+
+         jnxIpSecTunOutEncryptedBytes    Counter64,
+         jnxIpSecTunOutEncryptedPkts     Counter64,
+         jnxIpSecTunInDecryptedBytes     Counter64,
+         jnxIpSecTunInDecryptedPkts      Counter64,
+
+         jnxIpsSecTunAHInBytes           Counter64,
+         jnxIpsSecTunAHInPkts            Counter64,
+         jnxIpsSecTunAHOutBytes          Counter64,
+         jnxIpsSecTunAHOutPkts           Counter64,
+
+         jnxIpSecTunReplayDropPkts       Counter64,
+         jnxIpSecTunAhAuthFails          Counter64,
+         jnxIpSecTunEspAuthFails         Counter64,
+         jnxIpSecTunDecryptFails         Counter64,
+         jnxIpSecTunBadHeaders           Counter64,
+         jnxIpSecTunBadTrailers          Counter64,
+         jnxIpSecTunDroppedPkts          Counter64	
+      }											
+
+       jnxIpSecTunIndex OBJECT-TYPE
+         SYNTAX Integer32 (1..2147483647)
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The index of the IPsec Phase-2 Tunnel Table.
+             The value of the index is a number which begins
+             at one and is incremented with each tunnel that
+             is created. The value of this object will wrap
+             at 2,147,483,647."
+         ::= { jnxIpSecTunnelEntry 1 }
+
+       jnxIpSecRuleName OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Name of the rule configured in IPSec configuration."
+         ::= { jnxIpSecTunnelEntry 2 }
+
+       jnxIpSecTermName OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Name of the term configured under IPSec rule."
+         ::= { jnxIpSecTunnelEntry 3 }
+		 
+       jnxIpSecTunLocalGwAddrType OBJECT-TYPE
+         SYNTAX InetAddressType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address type of the local gateway (endpoint) for the IPsec
+             Phase-2 Tunnel."
+         ::= { jnxIpSecTunnelEntry 4 }
+
+       jnxIpSecTunLocalGwAddr OBJECT-TYPE
+         SYNTAX InetAddress
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address of the local gateway (endpoint) for the IPsec
+             Phase-2 Tunnel."
+         ::= { jnxIpSecTunnelEntry 5 }
+
+      jnxIpSecTunRemoteGwAddrType OBJECT-TYPE
+         SYNTAX InetAddressType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address type of the remote gateway (endpoint) for the IPsec
+             Phase-2 Tunnel."
+         ::= { jnxIpSecTunnelEntry 6 }
+
+      jnxIpSecTunRemoteGwAddr OBJECT-TYPE
+         SYNTAX InetAddress
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The IP address of the remote gateway (endpoint) for the IPsec
+             Phase-2 Tunnel."
+         ::= { jnxIpSecTunnelEntry 7 }
+
+      jnxIpSecTunLocalProxyId OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Identifier for the local end."
+         ::= { jnxIpSecTunnelEntry 8 }
+
+      jnxIpSecTunRemoteProxyId OBJECT-TYPE
+         SYNTAX DisplayString
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Identifier for the remote end."
+         ::= { jnxIpSecTunnelEntry 9 }
+		 
+      jnxIpSecTunKeyType OBJECT-TYPE
+         SYNTAX JnxKeyType
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "The type of key used by the IPsec Phase-2 Tunnel. It can be
+             one of the following two types:
+               - IKE negotiated
+               - Manually installed"
+         ::= { jnxIpSecTunnelEntry 10 }
+
+      jnxIpSecRemotePeerType OBJECT-TYPE
+         SYNTAX JnxRemotePeerType
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The type of the remote peer gateway (endpoint). It can be one
+             of the following two types:
+               - static (Remote peer whose IP address is known beforehand)
+               - dynamic (Remote peer whose IP address is not known
+                          beforehand)"
+         ::= { jnxIpSecTunnelEntry 11 }
+		 
+
+      jnxIpSecTunMtu OBJECT-TYPE
+         SYNTAX Integer32
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "MTU value of this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 12 }
+		 
+
+      jnxIpSecTunOutEncryptedBytes OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of bytes encrypted by this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 13 }
+		 
+
+      jnxIpSecTunOutEncryptedPkts OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets encrypted by this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 14 }
+		 
+
+      jnxIpSecTunInDecryptedBytes OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of bytes decrypted by this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 15 }
+		 
+
+      jnxIpSecTunInDecryptedPkts OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets decrypted by this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 16 }
+		 
+
+      jnxIpsSecTunAHInBytes OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of incoming bytes authenticated using AH by this Phase-2
+             tunnel."
+         ::= { jnxIpSecTunnelEntry 17 }
+		 
+
+      jnxIpsSecTunAHInPkts OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of incoming packets authenticated using AH by this Phase-2
+             tunnel."
+         ::= { jnxIpSecTunnelEntry 18 }
+		 
+
+      jnxIpsSecTunAHOutBytes OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of outgoing bytes applied AH by this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 19 }
+		 
+
+      jnxIpsSecTunAHOutPkts OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of outgoing packets applied AH by this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 20 }
+		 
+      jnxIpSecTunReplayDropPkts OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets dropped by this Phase-2 tunnel due to
+             anti replay check failure."
+         ::= { jnxIpSecTunnelEntry 21 }
+		 
+
+      jnxIpSecTunAhAuthFails OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets received by this Phase-2 tunnel that
+             failed AH authentication."
+         ::= { jnxIpSecTunnelEntry 22 }
+		 
+
+      jnxIpSecTunEspAuthFails OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets received by this Phase-2 tunnel that
+             failed ESP authentication."
+         ::= { jnxIpSecTunnelEntry 23 }
+		 
+
+      jnxIpSecTunDecryptFails OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets received by this Phase-2 tunnel that
+             failed decryption."
+         ::= { jnxIpSecTunnelEntry 24 }
+		 
+
+      jnxIpSecTunBadHeaders OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets received by this Phase-2 tunnel that
+             failed due to bad headers."
+         ::= { jnxIpSecTunnelEntry 25 }
+		 
+      jnxIpSecTunBadTrailers OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Number of packets received by this Phase-2 tunnel that
+             failed due to bad ESP trailers."
+         ::= { jnxIpSecTunnelEntry 26 }
+		 
+      jnxIpSecTunDroppedPkts  OBJECT-TYPE
+         SYNTAX Counter64
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "Total number of dropped packets for this Phase-2 tunnel."
+         ::= { jnxIpSecTunnelEntry 27 }
+		 
+
+
+
+
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- The IPsec Phase-2 Security Association Table
+   -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+      jnxIpSecSaTable OBJECT-TYPE
+         SYNTAX SEQUENCE OF JnxIpSecSaEntry
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The IPsec Phase-2 Security Association Table.
+            This table identifies the structure (in terms of
+            component SAs) of each active Phase-2 IPsec tunnel.
+            This table contains an entry for each active and
+            expiring security association and maps each entry
+            in the active Phase-2 tunnel table (ipSecTunTable)
+            into a number of entries in this table. The index of this
+            table reflects the
+
+                <destination-address, protocol, spi>
+
+            rule for identifying Security Associations."
+         ::= { jnxIpSecPhaseTwo 2 }
+
+      jnxIpSecSaEntry OBJECT-TYPE
+         SYNTAX JnxIpSecSaEntry
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "Each entry contains the attributes associated with
+             active and expiring IPsec Phase-2
+             security associations."
+         INDEX { jnxSpSvcSetName,          -- From jnxSpSvcSetTable
+                 jnxIpSecTunRemoteGwAddrType, -- From ipSecTunnelTable
+                 jnxIpSecTunRemoteGwAddr,     -- From ipSecTunnelTable
+                 jnxIpSecTunIndex,            -- From ipSecTunnelTable
+                 jnxIpSecSaIndex  }
+         ::= { jnxIpSecSaTable 1 }
+
+      JnxIpSecSaEntry ::= SEQUENCE {
+         jnxIpSecSaProtocol              INTEGER,	  
+         jnxIpSecSaIndex                 Integer32,
+         jnxIpSecSaInSpi                 JnxSpi,		  
+         jnxIpSecSaOutSpi                JnxSpi,		  
+         jnxIpSecSaInAuxSpi              JnxSpi,
+         jnxIpSecSaOutAuxSpi             JnxSpi,
+         jnxIpSecSaType                  JnxSAType,
+         jnxIpSecSaEncapMode             JnxEncapMode,
+         jnxIpSecSaLifeSize              Integer32,
+         jnxIpSecSaLifeTime              Integer32,
+         jnxIpSecSaActiveTime            TimeInterval,
+         jnxIpSecSaLifeSizeThreshold     Integer32,  
+         jnxIpSecSaLifeTimeThreshold     Integer32, 
+         jnxIpSecSaEncryptAlgo           JnxEncryptAlgo,
+         jnxIpSecSaAuthAlgo              JnxAuthAlgo,	  
+         jnxIpSecSaState                 INTEGER
+      }
+      jnxIpSecSaProtocol OBJECT-TYPE
+         SYNTAX INTEGER{
+                   ah(1),
+                   esp(2)
+                }
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The index, represents the security protocol (AH, ESP or
+             IPComp) for which this security association was setup."
+         ::= { jnxIpSecSaEntry 1 }
+
+      jnxIpSecSaIndex OBJECT-TYPE
+         SYNTAX Integer32 (1..2147483647)
+         MAX-ACCESS not-accessible
+         STATUS current
+         DESCRIPTION
+            "The index, in the context of the IPsec tunnel ipSecTunIndex,
+            of the security association represented by this table entry.
+            The value of this index is a number which begins at one and
+            is incremented with each SPI associated with an IPsec Phase-2
+            Tunnel.  The value of this object will wrap at 2,147,483,647."
+         ::= { jnxIpSecSaEntry 2 }
+
+      jnxIpSecSaInSpi OBJECT-TYPE
+         SYNTAX JnxSpi
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+             "The value of the incoming SPI."
+         ::= { jnxIpSecSaEntry 3 }
+
+      jnxIpSecSaOutSpi OBJECT-TYPE
+         SYNTAX JnxSpi
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+             "The value of the outgoing SPI."
+         ::= { jnxIpSecSaEntry 4 }
+
+      jnxIpSecSaInAuxSpi OBJECT-TYPE
+         SYNTAX JnxSpi
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+             "The value of the incoming auxiliary SPI. This is valid for AH
+              and ESP bundles."
+         ::= { jnxIpSecSaEntry 5 }
+
+      jnxIpSecSaOutAuxSpi OBJECT-TYPE
+         SYNTAX JnxSpi
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+             "The value of the outgoing auxiliary SPI. This is valid for AH
+              and ESP bundles."
+         ::= { jnxIpSecSaEntry 6 }
+
+      jnxIpSecSaType OBJECT-TYPE
+         SYNTAX JnxSAType
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+             "This field represents the type of security associations 
+			 which can be either manual or dynamic"
+         ::= { jnxIpSecSaEntry 7 }
+
+      jnxIpSecSaEncapMode OBJECT-TYPE
+         SYNTAX JnxEncapMode
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The encapsulation mode used by an IPsec Phase-2 Tunnel. "
+         ::= { jnxIpSecSaEntry 8 }
+
+      jnxIpSecSaLifeSize OBJECT-TYPE
+         SYNTAX Integer32
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. "
+         ::= { jnxIpSecSaEntry 9 }
+
+      jnxIpSecSaLifeTime OBJECT-TYPE
+         SYNTAX Integer32
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. "
+         ::= { jnxIpSecSaEntry 10 }
+
+      jnxIpSecSaActiveTime OBJECT-TYPE
+         SYNTAX TimeInterval
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The length of time the IPsec Phase-2 Tunnel has been active in seconds. "
+         ::= { jnxIpSecSaEntry 11 }
+
+      jnxIpSecSaLifeSizeThreshold OBJECT-TYPE
+         SYNTAX Integer32
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The security association LifeSize refresh threshold in kilobytes. "
+         ::= { jnxIpSecSaEntry 12 }
+
+      jnxIpSecSaLifeTimeThreshold OBJECT-TYPE
+         SYNTAX Integer32
+         MAX-ACCESS read-only 
+         STATUS current 
+         DESCRIPTION
+            "The security association LifeTime refresh threshold in seconds. "
+         ::= { jnxIpSecSaEntry 13 }
+
+      jnxIpSecSaEncryptAlgo OBJECT-TYPE
+         SYNTAX JnxEncryptAlgo
+         MAX-ACCESS read-only 
+         STATUS current
+         DESCRIPTION
+            "The Encryption algorithm used to encrypt 
+			 the packets which can be either es-cbc or 3des-cbc. "
+         ::= { jnxIpSecSaEntry 14 }
+
+      jnxIpSecSaAuthAlgo OBJECT-TYPE
+         SYNTAX JnxAuthAlgo
+         MAX-ACCESS read-only 
+         STATUS current
+         DESCRIPTION
+            "The algorithm used for authentication of packets which
+			 can be hmac-md5-96 or hmac-sha1-96"
+         ::= { jnxIpSecSaEntry 15 }
+
+      jnxIpSecSaState OBJECT-TYPE
+         SYNTAX INTEGER{
+                   unknown(0),
+                   active(1),
+                   expiring(2)
+                }
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "This column represents the status of the security association
+            represented by this table entry. If the status of the SA is
+            'active', the SA is ready for active use. The status
+            'expiring' represents any of the various states that the
+            security association transitions through before being purged."
+         ::= { jnxIpSecSaEntry 16 }
+   END
+

mibs/juniper/JNX-SNMPv2-CAPABILITY

@@ -0,0 +1,98 @@
+
+-- *****************************************************************
+-- JNX-SNMPv2-CAPABILITY.mib: Juniper SNMPv2-MIB AGENT-CAPABILITIES
+--
+-- Copyright (c) 2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- *****************************************************
+
+JNX-SNMPv2-CAPABILITY DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY
+        FROM SNMPv2-SMI
+    AGENT-CAPABILITIES
+        FROM SNMPv2-CONF
+    jnxAgentCapability
+        FROM JUNIPER-SMI;
+
+
+jnxSnmpV2Capability MODULE-IDENTITY
+    LAST-UPDATED "201306180000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+             E-mail: support@juniper.net"
+    DESCRIPTION
+        "Agent capabilities for SNMPv2-MIB"
+    ::= { jnxAgentCapability 2 }
+
+jnxSnmpV2CapJunos AGENT-CAPABILITIES
+    PRODUCT-RELEASE "All JUNOS Version"
+    STATUS          current
+    DESCRIPTION
+        "JUNOS SNMPv2 MIB capabilities"
+
+    SUPPORTS        SNMPv2-MIB
+    INCLUDES        {
+                        systemGroup,
+                        snmpGroup,
+                        snmpCommunityGroup,
+                        snmpSetGroup,
+                        snmpBasicNotificationsGroup
+                    }
+
+    VARIATION       sysDescr
+    ACCESS          read-only
+    DESCRIPTION
+        "A textual description of the entity.
+         It will include product type, software
+         release, and build date.
+         Here is the sample output:
+
+         Juniper Networks, Inc. mx480 internet router,
+         kernel JUNOS 12.2R2.1,
+         Build date: 2012-10-27 01:54:15 UTC Copyright (c)
+                     1996-2012 Juniper Networks, Inc."
+
+
+    VARIATION       sysObjectID
+    ACCESS          read-only
+    DESCRIPTION
+        "It is the assigned identifier to represent platform
+         name. For example enterprises.2636.1.1.1.2.21 to
+         jnxProductNameMX960"
+
+    VARIATION       sysORLastChange
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       sysORID
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       sysORDescr
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       sysORUpTime
+    ACCESS          not-implemented
+    DESCRIPTION
+        "This object is not implemented."
+
+    VARIATION       snmpSetSerialNo 
+    ACCESS          read-only
+    DESCRIPTION
+        "snmp write is not supported."
+
+    ::= { jnxSnmpV2Capability 1 }
+
+END
+

mibs/juniper/JUNIPER-AI-MANAGER-MIB

@@ -0,0 +1,530 @@
+--
+-- Juniper Enterprise Specific MIB: Advanced Insight Manager MIB
+-- 
+-- Copyright (c) 2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-AI-MANAGER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    DisplayString
+        FROM SNMPv2-TC
+    jnxAdvancedInsightMgr
+        FROM JUNIPER-SMI;
+
+jnxAIManager MODULE-IDENTITY
+
+    LAST-UPDATED "200710090000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1194 N. Mathilda Avenue
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "The MIB modules representing Juniper Networks'
+	    implementation of enterprise specific MIBs 
+	    supported by a single SNMP agent."
+    REVISION    "200710090000Z" -- 09-Oct-07
+    DESCRIPTION
+            "Added Advanced Insight Manager identification objects."
+
+    ::= { jnxAdvancedInsightMgr 1 }
+
+
+-- Juniper Advanced Insight Manager MIB
+--
+
+-- Top level objects
+
+    jnxAIMDescr OBJECT-TYPE 
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+	        "Description of Advanced Insight notification."
+	::= { jnxAIManager 1 }
+
+    jnxAIMHostName OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Device associated with Advanced Insight 
+		notification."
+	::= { jnxAIManager 2 }
+
+    jnxAIMOrganization OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Organization associated with Advanced Insight 
+		notification."
+	::= { jnxAIManager 3 }
+
+    jnxAIMIncidentHostID OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"HostID of incident associated with Advanced
+		Insight notification."
+	::= { jnxAIManager 4 }
+
+    jnxAIMCaseID OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"CaseID (assigned by Juniper) associated with 
+		Advanced Insight notification."
+	::= { jnxAIManager 5 }
+
+    jnxAIMIssueDate OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Issue Date of the intelligence message associated 
+		with Advanced Insight notification."
+	::= { jnxAIManager 6 }
+
+	jnxAIMIPAddress OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"IPAddress of device associated with Advanced 
+		Insight notification."
+	::= { jnxAIManager 7 }
+
+	jnxAIMSerialNumber OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"SerailNumber of device associated with Advanced
+		Insight notification."
+	::= { jnxAIManager 8 }
+
+	jnxAIMPartNumber OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"part number of device associated with Advanced
+		Insight notification."
+	::= { jnxAIManager 9 }
+
+	jnxAIMContractAgreementNumber OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Contract Agreement Number."
+	::= { jnxAIManager 10 }
+
+	jnxAIMContractAgreementStatus OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Contract Agreement Status."
+	::= { jnxAIManager 11 }
+
+	jnxAIMContractSKU OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Contract SKU."
+	::= { jnxAIManager 12 }
+
+	jnxAIMContractSKUType OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Contract SKU Type."
+	::= { jnxAIManager 13 }
+
+	jnxAIMContractStartDate OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Contract Start Date."
+	::= { jnxAIManager 14 }
+
+	jnxAIMContractEndDate OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Contract End Date."
+	::= { jnxAIManager 15 }
+
+    jnxAIMProduct OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Product."
+	::= { jnxAIManager 16 }
+
+	jnxAIMPlatform OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Platform."
+	::= { jnxAIManager 17 }
+
+	jnxAIMJunosVersion OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Junos Version."
+	::= { jnxAIManager 18 }
+
+	jnxAIMScriptVersion OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"AI Script Version."
+	::= { jnxAIManager 19 }
+
+	jnxAIMExposureMsg OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Exposure Message."
+	::= { jnxAIManager 20 }
+
+	jnxAIMExposureIssueDate OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Exposure Issue Date."
+	::= { jnxAIManager 21 }
+
+	jnxAIMExposurePRNumber OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Exposure PR Number."
+	::= { jnxAIManager 22 }
+	
+	jnxAIMExposureLink OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Exposure Link."
+	::= { jnxAIManager 23 }
+	
+	jnxAIMLastIJMBReceivedTime OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Last IJMB received time."
+	::= { jnxAIManager 24 }
+
+	jnxAIMDeviceState OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"State of the connected member device"
+	::= { jnxAIManager 25 }
+
+	jnxAIMBIOSState OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"BIOS State of the device"
+	::= { jnxAIManager 26 }
+
+	jnxAIMDaysToExpireForPartnerCert OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Days to expire for partner certificate"
+	::= { jnxAIManager 27 }
+
+	jnxAIMExpDateTimePartnerCert OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Date and time of expire of partner certificate"
+	::= { jnxAIManager 28 }
+	
+	jnxAIMPHDExpectedDeviceSlot OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Expected time slot for PHD on the device"
+	::= { jnxAIManager 29 }
+	
+	jnxAIMPHDExpectedSNSlot OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Expected time slot for PHD in Service Now"
+	::= { jnxAIManager 30 }
+	
+	jnxAIMPHDReceivedTime OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Received time slot for PHD on the device"
+	::= { jnxAIManager 31 }
+	
+	jnxAIMPHDFailureType OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Type of failure of PHD. Ex: Missed or Invalid PHD"
+	::= { jnxAIManager 32 }
+	
+	jnxAIMObjectId OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..63))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Database Id associated with Advanced 
+		Insight notification."
+	::= { jnxAIManager 33 }
+	
+--
+-- definition of Advanced Insight Manager traps
+--
+
+jnxAIManagerNotifications  OBJECT IDENTIFIER ::= { jnxAIManager 0 }
+
+
+    jnxAIMNewIncidentDetected NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMOrganization,
+			  jnxAIMIncidentHostID,
+			  jnxAIMIPAddress,
+			  jnxAIMObjectId }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMNewIncidentDetected trap signifies that
+		a new incident has been detected."
+	::= { jnxAIManagerNotifications 1 }
+
+    jnxAIMIncidentReportedToJuniper NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMOrganization,
+			  jnxAIMIncidentHostID,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMIncidentReportedToJuniper trap signifies 
+		that an incident has been reported to Juniper."
+	::= { jnxAIManagerNotifications 2 }
+
+    jnxAIMCaseIDAssigned NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMOrganization,
+			  jnxAIMIncidentHostID,
+			  jnxAIMCaseID,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMCaseIDAssigned trap signifies that an 
+		incident has been assigned CaseID."
+	::= { jnxAIManagerNotifications 3 }
+
+    jnxAIMCaseUpdated NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMOrganization,
+			  jnxAIMIncidentHostID,
+			  jnxAIMCaseID,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMCaseUpdated trap signifies that 
+		a case has been updated."
+	::= { jnxAIManagerNotifications 4 }
+
+    jnxAIMNewIntelligenceMessage NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMOrganization,
+			  jnxAIMIssueDate,
+			  jnxAIMObjectId }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMNewIntelligenceMessage trap signifies 
+		that a new intelligence message has been received."
+	::= { jnxAIManagerNotifications 5 }
+
+	jnxAIMNewEOLMatch NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMNewEOLMatch trap signifies that
+		a new EOL match for a Device has been detected."
+	::= { jnxAIManagerNotifications 6 }
+
+	jnxAIMNewPBNArrival NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMNewPBNArrival trap signifies that
+		a new PBN has arrived."
+	::= { jnxAIManagerNotifications 7 }
+
+	jnxAIMNewPBNMatch NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr}
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMNewPBNMatch trap signifies that
+		a new PBN match for a Device has been detected."
+	::= { jnxAIManagerNotifications 8 }
+	
+	jnxAIMContractExpiry NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+	          jnxAIMHostName,
+			  jnxAIMSerialNumber,
+			  jnxAIMPartNumber,
+			  jnxAIMContractAgreementNumber,
+			  jnxAIMContractAgreementStatus,
+			  jnxAIMContractSKU,
+			  jnxAIMContractSKUType,
+			  jnxAIMContractStartDate,
+			  jnxAIMContractEndDate,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMContractExpiry trap signifies that
+		a contarct for a serial number is going to expire in the next 60 days."
+	::= { jnxAIManagerNotifications 9 }
+
+	jnxAIMNewExposure NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+	          jnxAIMHostName,
+			  jnxAIMProduct,
+			  jnxAIMPlatform,
+			  jnxAIMJunosVersion,
+			  jnxAIMScriptVersion,
+			  jnxAIMExposureMsg,
+			  jnxAIMExposureIssueDate,
+			  jnxAIMExposurePRNumber,
+			  jnxAIMExposureLink,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMNewExposure trap signifies that
+		a new exposure for a device has been detected."
+	::= { jnxAIManagerNotifications 10 }
+
+   jnxAIMIncidentWithoutShiptoAddress NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+			  jnxAIMHostName,
+			  jnxAIMOrganization,
+			  jnxAIMIncidentHostID,
+			  jnxAIMIPAddress }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMIncidentWithoutShiptoAddress trap signifies
+		that an incident has been reported to Juniper without ship to address."
+	::= { jnxAIManagerNotifications 11 }
+	
+	jnxAIMSwitchToAutoCollectionOfIJMB NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+	          jnxAIMHostName,
+			  jnxAIMProduct,
+			  jnxAIMPlatform,
+			  jnxAIMSerialNumber,
+			  jnxAIMLastIJMBReceivedTime }
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMSwitchToAutoCollectionOfIJMB trap signifies that
+		Service Now has switched to auto collection of IJMB for a device."
+	::= { jnxAIManagerNotifications 12 }
+
+	jnxAIMConnectedMemberDeviceActions NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+              jnxAIMOrganization,
+              jnxAIMHostName,
+			  jnxAIMIPAddress,
+			  jnxAIMSerialNumber,
+			  jnxAIMDeviceState}
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMConnectedMemberDeviceActions trap signifies that
+		connected member devices have been added in partner proxy or
+		deleted in connected member."
+	::= { jnxAIManagerNotifications 13 }
+
+	jnxAIMDeviceBIOSState NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDescr,
+              jnxAIMOrganization,
+              jnxAIMHostName,
+			  jnxAIMIPAddress,
+			  jnxAIMSerialNumber,
+			  jnxAIMBIOSState}
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMDeviceBIOSState trap signifies that
+		BIOS state of a device is either a success, failure
+		or both."
+	::= { jnxAIManagerNotifications 14 }
+
+	jnxAIMPartnerCertExpiry NOTIFICATION-TYPE
+	OBJECTS		{ jnxAIMDaysToExpireForPartnerCert,
+              		jnxAIMExpDateTimePartnerCert}
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMPartnerCertExpiry trap notifies the user about the expiry of the Partner certificate. "
+	::= { jnxAIManagerNotifications 15 }
+	
+	jnxAIMPartnerCertExpired NOTIFICATION-TYPE
+	OBJECTS		{jnxAIMExpDateTimePartnerCert}
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMPartnerCertExpired trap notifies the user after the expiry of the Partner certificate. "
+	::= { jnxAIManagerNotifications 16 }
+
+	jnxAIMPHDCollectionFailure NOTIFICATION-TYPE
+	OBJECTS		{jnxAIMDescr, jnxAIMHostName, jnxAIMIPAddress, jnxAIMPHDFailureType, jnxAIMPHDReceivedTime, jnxAIMPHDExpectedDeviceSlot, jnxAIMPHDExpectedSNSlot}
+	STATUS		current
+	DESCRIPTION
+		"A jnxAIMPHDCollectionFailure trap notifies the PHD collection failure. "
+	::= { jnxAIManagerNotifications 17 }
+		
+END
+

mibs/juniper/JUNIPER-ALARM-EXT-MIB

@@ -0,0 +1,89 @@
+--
+-- Juniper Enterprise Specific MIB: Ping MIB
+-- 
+-- Copyright (c) 2001-2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-ALARM-EXT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE 
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DateAndTime
+	FROM SNMPv2-TC                  -- [RFC2579]
+    alarmClearEntry
+	FROM ALARM-MIB
+    jnxMibs, jnxAlarmExtMibRoot
+        FROM JUNIPER-SMI;
+
+jnxAlarmMIB MODULE-IDENTITY
+    LAST-UPDATED "201209041502Z" -- Tue Sept 2 15:02:46 2012 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for alarms from the router chassis box."
+    ::= { jnxAlarmExtMibRoot 1 }
+
+jnxAlarmObjects	OBJECT IDENTIFIER ::= { jnxAlarmMIB 1 }
+
+--  Extension to Clear table.     
+--  Some systems may have a requirement that information
+--  on alarms that are no longer active be available. 
+--  This memo provides a clear table to support this 
+--  requirement. Though Clear table provides the history 
+--  of alarms raised, it doesn't the datAndTime when the 
+--  alarm was rasied. This information is critical. 
+--  A new table is deined that extends the alarmClearTable
+--  by AUGENTING it. This table will provide dateAndTime 
+--  a particular which is no longer active was raised.
+--
+-- Alarm Clear Table Extensions
+--
+
+
+jnxAlarmClearTable    OBJECT-TYPE
+    SYNTAX	    SEQUENCE OF JnxAlarmClearEntry
+    MAX-ACCESS	    not-accessible
+    STATUS	    current
+    DESCRIPTION	    
+	" This table augments alarmClearTable. This table
+	contains additional object needed to indicate 
+	DateAndTime when a particular alarm was raised."
+    ::= { jnxAlarmObjects 1}
+
+jnxAlarmClearEntry    OBJECT-TYPE
+    SYNTAX	    JnxAlarmClearEntry
+    MAX-ACCESS	    not-accessible
+    STATUS	    current
+    DESCRIPTION	    
+	" An entry containing additional information 
+	applicable to a particular entry in alarm
+	ClearTable."
+    AUGMENTS	    { alarmClearEntry }
+    ::= { jnxAlarmClearTable 1 }
+
+JnxAlarmClearEntry    ::=
+    SEQUENCE {
+	    jnxAlarmClearActiveDateAndTime    DateAndTime	
+	}
+
+jnxAlarmClearActiveDateAndTime	OBJECT-TYPE
+    SYNTAX	    DateAndTime
+    MAX-ACCESS	    read-only
+    STATUS	    current
+    DESCRIPTION
+	" This object indicates DateAndTime, when 
+	current alarm was raised."
+    ::=	{ jnxAlarmClearEntry 1 }
+
+END

mibs/juniper/JUNIPER-ALARM-MIB

@@ -0,0 +1,185 @@
+--
+-- Juniper Enterprise Specific MIB: Alarm MIB
+-- 
+-- Copyright (c) 2001-2003, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-ALARM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Gauge32
+        FROM SNMPv2-SMI
+    TimeStamp
+        FROM SNMPv2-TC
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxAlarms MODULE-IDENTITY
+    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:46 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for alarms from the router chassis box."
+    ::= { jnxMibs 4 }
+
+
+
+
+--  ::= { jnxAlarms 1 }			This OID is obsolete.
+
+
+--
+-- Craft Alarms
+--
+
+    jnxCraftAlarms 	  OBJECT IDENTIFIER ::= { jnxAlarms 2 }
+
+
+    jnxAlarmRelayMode OBJECT-TYPE
+	SYNTAX		INTEGER {
+		other(1),	-- other or unknown
+		passOn(2),	-- alarms being passed on
+		cutOff(3)	-- alarms being cut off
+	}		
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The alarm relay mode of the craft interface
+		panel for both yellow and red alarms.
+
+		Both yellow and red alarms could be cut off 
+		by a front panel Alarm Cutoff / Lamp Test 
+		(ACO/LT) button.
+
+		In the pass-on mode, the alarm relay will be 
+		activated to pass on the yellow or red alarms.
+		In the cut-off mode, both yellow and red alarms
+		will be cut off from the alarm relays which are 
+		normally connected to audible sirens or visual 
+		flashing devices."
+
+
+	::= { jnxCraftAlarms 1 }
+
+
+    jnxYellowAlarms 	  OBJECT IDENTIFIER ::= { jnxCraftAlarms 2 }
+
+    jnxYellowAlarmState OBJECT-TYPE
+	SYNTAX		INTEGER {
+			other(1),	-- alarm state is unknown
+			off(2),		-- alarm is off
+			on(3)		-- alarm is on
+	}
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The yellow alarm state on the craft interface 
+		panel.
+
+		The yellow alarm is on when there is some 
+		system warning such as maintenance alert or 
+		significant temperature increase.
+
+		This yellow alarm state could be turned off 
+		by the ACO/LT (Alarm Cut Off / Lamp Test) button
+		on the front panel module."
+
+
+	::= { jnxYellowAlarms 1 }
+
+    jnxYellowAlarmCount OBJECT-TYPE
+	SYNTAX		Gauge32
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The number of currently active and non-silent 
+		yellow alarms.
+
+		This object is independent of the ACO/LT (Alarm
+		Cut Off / Lamp Test) button."
+
+
+	::= { jnxYellowAlarms 2 }
+
+
+    jnxYellowAlarmLastChange OBJECT-TYPE
+	SYNTAX		TimeStamp
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The value of sysUpTime when the yellow alarm
+		last changed - either from off to on or vice
+		versa. 	Zero if unknown or never changed since
+		the agent was up."
+
+
+	::= { jnxYellowAlarms 3 }
+
+
+    jnxRedAlarms 	  OBJECT IDENTIFIER ::= { jnxCraftAlarms 3 }
+
+    jnxRedAlarmState OBJECT-TYPE
+	SYNTAX		INTEGER {
+			other(1),	-- alarm state is unknown
+			off(2),		-- alarm is off
+			on(3)		-- alarm is on
+	}
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The red alarm indication on the craft interface 
+		panel.
+
+		The red alarm is on when there is some system 
+		failure or power supply failure or the system 
+		is experiencing a hardware malfunction or some 
+		threshold is being exceeded.
+
+		This red alarm state could be turned off by the
+		ACO/LT (Alarm Cut Off / Lamp Test) button on the
+		front panel module."
+
+
+	::= { jnxRedAlarms 1 }
+
+
+    jnxRedAlarmCount OBJECT-TYPE
+	SYNTAX		Gauge32
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The number of currently active and non-silent 
+		red alarms.
+
+		This object is independent of the ACO/LT (Alarm
+		Cut Off / Lamp Test) button."
+
+
+	::= { jnxRedAlarms 2 }
+
+
+    jnxRedAlarmLastChange OBJECT-TYPE
+	SYNTAX		TimeStamp
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The value of sysUpTime when the red alarm
+		last changed - either from off to on or vice
+		versa. 	Zero if unknown or never changed since
+		the agent was up."
+
+
+	::= { jnxRedAlarms 3 }
+
+
+END

mibs/juniper/JUNIPER-ANALYZER-MIB

@@ -0,0 +1,407 @@
+JUNIPER-ANALYZER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 
+	FROM SNMPv2-SMI
+    TruthValue, DisplayString
+	FROM SNMPv2-TC
+    jnxExAnalyzer
+	FROM JUNIPER-EX-SMI;
+
+jnxAnalyzerMIB MODULE-IDENTITY
+    LAST-UPDATED "201407170000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise specific 
+	    MIB for Analyzer and Remote Analyzer. Port mirroring is widely 
+	    used in enterprise switches to send a copy of all or sampled 
+	    packets seen on a port to an anlyzer on the same or different 
+	    switch."
+
+    REVISION
+        "200808010000Z" -- Fri Aug 01 00:00:00 2008 UTC
+
+    DESCRIPTION
+        "Initial version"
+
+    REVISION
+        "200904220000Z" -- Wed April 22 00:00:00 2009 UTC
+
+    DESCRIPTION
+        "Marking jnxAnalyzerStatus as deprecated"
+
+    REVISION
+        "201007300000Z" -- Fri July 30 00:00:00 2009 UTC
+
+    DESCRIPTION
+        "Marking deprecated OIDs as obsolete"
+
+    REVISION
+        "201407170000Z" -- THU July 17  00:00:00 2014 UTC
+
+    DESCRIPTION
+        "Rectifying typo errors from 'Anlayzer' to 'Analyzer'"
+
+    ::= { jnxExAnalyzer 1 }
+
+jnxAnalyzerMIBObjects      OBJECT IDENTIFIER ::= { jnxAnalyzerMIB 1 }
+
+-- The Analyzer Table
+
+jnxAnalyzerTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF JnxAnalyzerEntry
+    MAX-ACCESS	not-accessible	
+    STATUS	current
+    DESCRIPTION	
+	"Network traffic passing through ports is analyzed by sending a
+	copy of the traffic to another port on the same or different switch. 
+	This table contains the analyzer parameters."
+    ::= { jnxAnalyzerMIBObjects 1 }
+
+jnxAnalyzerEntry OBJECT-TYPE
+    SYNTAX	JnxAnalyzerEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"A row instance contains the Analyzer Name, Analyzer Status, Mirroring 
+	Ratio, Loss Priority."
+    INDEX { jnxAnalyzerName }
+    ::= { jnxAnalyzerTable 1 }
+
+JnxAnalyzerEntry ::=
+    SEQUENCE {
+	jnxAnalyzerName         DisplayString,
+	jnxAnalyzerStatus       TruthValue,
+	jnxMirroringRatio       Unsigned32,
+	jnxLossPriority	        INTEGER
+    }
+
+jnxAnalyzerName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This object identifies a unique Analyzer configured on the switch." 
+    ::= { jnxAnalyzerEntry 1 }
+
+jnxAnalyzerStatus OBJECT-TYPE
+    SYNTAX 	TruthValue
+    MAX-ACCESS	read-only
+    STATUS	obsolete
+    DESCRIPTION
+	"This object identifies whether the mirroring associated with a 
+	particular analyzer is enabled or disabled."
+    ::= { jnxAnalyzerEntry 2 }
+
+jnxMirroringRatio OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+	"This object will specify the mirroring ratio. User can configure 
+	the analyzer to mirror only one out of X packets [1:X packets] in 
+	the ingress/egress side based on whether the port is configured for
+	ingress or egress mirroring. The configuration supports a range from
+	1: X [0 <= X <= 2047].Default value is 1."
+    DEFVAL { 1 }
+    ::= { jnxAnalyzerEntry 3 }
+
+jnxLossPriority OBJECT-TYPE
+    SYNTAX 	INTEGER {
+	low (0),
+	high (1) }
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The analyzer port may be congested when the number of 
+	packets exceeds the bandwidth of the analyzer port. So the 
+	loss-priority parameter is enabled. The switched packets 
+	will not get affected by this. The value 0 corresponds to low 
+	priority.The value 1 corresponds to high loss priority. "
+    ::= { jnxAnalyzerEntry 4 }
+
+
+-- The ANALYZER INPUT Table
+
+jnxAnalyzerInputTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF JnxAnalyzerInputEntry
+    MAX-ACCESS	not-accessible
+    STATUS 	obsolete
+    DESCRIPTION
+	"An analyzer Session is an association of several source ports to 
+	a destination port.A range or series of ports can be mirrored in
+	a session."
+    ::= { jnxAnalyzerMIBObjects 2 }
+
+jnxAnalyzerInputEntry OBJECT-TYPE
+    SYNTAX	JnxAnalyzerInputEntry
+    MAX-ACCESS	not-accessible
+    STATUS	obsolete
+    DESCRIPTION	
+	"An Entry is created for each Input Source port."
+    INDEX { jnxAnalyzerName, jnxAnalyzerInputValue } 
+    ::= { jnxAnalyzerInputTable 1 }
+
+JnxAnalyzerInputEntry ::= 
+    SEQUENCE {
+	jnxAnalyzerInputValue 			DisplayString,
+	jnxAnalyzerInputOption			INTEGER,
+	jnxAnalyzerInputType			INTEGER
+    }
+
+jnxAnalyzerInputValue OBJECT-TYPE
+    SYNTAX	DisplayString (SIZE(0..255))
+    MAX-ACCESS	not-accessible
+    STATUS	obsolete
+    DESCRIPTION
+	"This identifies each different analyzer input source.
+	
+	If the value of jnxAnalyzerInputType is 1 then jnxAnalyzerInputValue
+	refers to the input source Interface Name.
+	
+	If the value of jnxAnalyzerInputType is 2 then jnxAnalyzerInputValue
+	refers to the input source vlan name."
+    ::= { jnxAnalyzerInputEntry 1 }
+
+jnxAnalyzerInputOption	OBJECT-TYPE
+    SYNTAX	INTEGER {
+	ingress (1),
+	egress	(2) 
+    }
+    MAX-ACCESS	read-only
+    STATUS	obsolete
+    DESCRIPTION
+	"A source port is a switch port that is been mirrored. It can be 
+	mirrored based either on Ingress(received) traffic or egress
+	(transmitted) traffic.
+	
+	The goal of receive (or ingress) Analyzer is to monitor as much as 
+	possible all the packets received by the source interface. The amount
+	of received packets  mirrored to the destination port depends on the 
+	mirroring ratio. A series or range of ingress ports can be mirrored 
+	in an analyzer session.
+	
+	The goal of transmit (or egress) analyzer is to monitor as much as 
+	possible all the packets sent by the source interface. The amount 
+	of egress packets mirrored to the destination port depends on the 
+	mirroring ratio.The copy is provided after the packet is modified. 
+	A range of egress ports can be mirrored in an analyzer session. 
+	The value 1 corresponds to mirroring ingress traffic. The value 2 
+	corresponds to mirroring egress traffic."
+    ::= { jnxAnalyzerInputEntry 2 }
+
+jnxAnalyzerInputType OBJECT-TYPE
+    SYNTAX	INTEGER {
+	interface (1),
+	vlanname  (2)
+    }
+    MAX-ACCESS	read-only
+    STATUS	obsolete
+    DESCRIPTION
+	"This specifies whether interfaces or VLANs is mirrored. 
+        
+        Mirroring can be done on the basis of the interface name.All packets
+	received on a port configured for ingress mirroring is sent to the 
+	analyzer port.All packets sent out on a port configured for egress 
+	mirroring is sent to the analyzer port.Any number of network ports 
+	can be configured for ingress or egress mirroring.The value one of
+	jnxAnalayzerInputType corresponds to mirroring the interface traffic.
+
+	On a particular switch, the user can choose to monitor all the ports 
+	that belong to a particular VLAN. It is needed in order to analyze 
+	the network traffic in one or more VLANs.Mirroring can be configured 
+	in ingress direction only for VLAN.
+	
+	Mirroring can be done on the basis of VLAN name (supported only in
+        ingress). All packets received on a particular VLAN are sent out to
+        the analyzer.The value two of jnxAnalyzerInputType corresponds to 
+	mirroring vlan traffic."
+    ::= { jnxAnalyzerInputEntry 3 }
+
+
+-- The ANALYZER OUTPUT Table		
+
+jnxAnalyzerOutputTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF JnxAnalyzerOutputEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"This table describes the destination port to which the traffic from 
+	the source ports are copied."
+    ::= { jnxAnalyzerMIBObjects 3 }
+
+jnxAnalyzerOutputEntry OBJECT-TYPE
+    SYNTAX	JnxAnalyzerOutputEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"An Entry is created for each destination port or destination vlan."
+    INDEX { jnxAnalyzerName, jnxAnalyzerOutputValue }
+    ::= { jnxAnalyzerOutputTable 1 }
+
+JnxAnalyzerOutputEntry ::=
+    SEQUENCE {
+	jnxAnalyzerOutputValue			DisplayString,
+        jnxAnalyzerOutputType			INTEGER
+    }
+
+jnxAnalyzerOutputValue	OBJECT-TYPE
+    SYNTAX	DisplayString (SIZE(0..255))
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"This object identifies each different destination port or 
+	destination vlan.
+	
+	If the value of jnxAnalyzerOutputType is 1 then jnxAnalyzerOutputValue
+	gives the destination interface name.
+	
+	If the value of jnxAnalyzerOutputType is 2 then jnxAnalyzerOutputValue
+	gives the destination vlan name."
+    ::= { jnxAnalyzerOutputEntry 1 }
+
+jnxAnalyzerOutputType OBJECT-TYPE
+    SYNTAX	INTEGER {
+	interface  (1),
+	vlanname   (2)
+    }
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The destination port can be on the same switch or on a	different 
+	switch(Remote Analyzer).
+
+	Value 1 specifies that the destination interface is on the same 
+	switch and it receives a copy of traffic from the source ports.
+	The port does not transmit any traffic except that required for
+	the analyzer session.
+	
+	The traffic for each Remote Analyzer session is carried over a 
+	user-specified Remote Analyzer VLAN that is dedicated for that 
+	Remote Analyzer session in all participating switches. A special 
+	vlan is confgiured exclusively for remote mirroring by marking it 
+	as analyzer vlan.  Intermediate switches will have a few ports
+ 	(minimum of 2 ports )as members of the analyzer vlan. These
+	are the trunk ports which act as the link between the switches.
+	The analyzer ports on the destination switch are also added to 
+	the Analyzer VLAN. 
+
+	Value  2 specifies  that the traffic from all the source ports is 
+	copied into the Remote Analyzer vlan specified by the vlan name.
+
+        In the source switch the analyzer session destination is given 
+	as the analyzer vlan. In the intermediate switches the analyzer 
+	sessions have the source and the destination as the analyzer vlan. 
+	The packet will reach the destination ports as it will be a part 
+	of the analyzer vlan."	
+    ::= { jnxAnalyzerOutputEntry 2 }
+
+-- jnxExAnalyzerInputTable Table
+
+jnxExAnalyzerInputTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxExAnalyzerInputEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An analyzer Session is an association of several source ports to
+        a destination port.A range or series of ports can be mirrored in
+        a session."
+    ::= { jnxAnalyzerMIBObjects 4 }
+
+jnxExAnalyzerInputEntry OBJECT-TYPE
+    SYNTAX      JnxExAnalyzerInputEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An Entry is created for each Input Source port."
+    INDEX { jnxAnalyzerName, jnxExAnalyzerInputOption, jnxExAnalyzerInputValue }
+    ::= { jnxExAnalyzerInputTable 1 }
+
+JnxExAnalyzerInputEntry ::=
+    SEQUENCE {
+        jnxExAnalyzerInputOption                  INTEGER,
+        jnxExAnalyzerInputValue                   DisplayString,
+        jnxExAnalyzerInputType                    INTEGER
+    }
+
+jnxExAnalyzerInputOption  OBJECT-TYPE
+    SYNTAX      INTEGER {
+        ingress        (1),
+        egress         (2),
+        vlan           (3),
+        egress-vlan    (4)
+    }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A source port is a switch port that is been mirrored. It can be
+        mirrored based either on Ingress(received) traffic or egress
+        (transmitted) traffic.
+
+        The goal of receive (or ingress) Analyzer is to monitor as much as
+        possible all the packets received by the source interface. The amount
+        of received packets  mirrored to the destination port depends on the
+        mirroring ratio. A series or range of ingress ports can be mirrored
+        in an analyzer session.
+
+        The goal of transmit (or egress) analyzer is to monitor as much as
+        possible all the packets sent by the source interface. The amount
+        of egress packets mirrored to the destination port depends on the
+        mirroring ratio.The copy is provided after the packet is modified.
+        A range of egress ports can be mirrored in an analyzer session.
+        The value 1 corresponds to mirroring ingress traffic. The value 2
+        corresponds to mirroring egress traffic. The value 3 corresponds to
+        mirroring vlan ingress traffic. The value 4 corresponds to mirroring 
+        vlan egress traffic."
+    ::= { jnxExAnalyzerInputEntry 1 }
+
+jnxExAnalyzerInputValue OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This identifies each different analyzer input source.
+
+        If the value of jnxExAnalyzerInputType is 1 then jnxExAnalyzerInputValue
+        refers to the input source Interface Name.
+
+        If the value of jnxExAnalyzerInputType is 2 then jnxExAnalyzerInputValue
+        refers to the input source vlan name."
+    ::= { jnxExAnalyzerInputEntry 2 }
+
+jnxExAnalyzerInputType OBJECT-TYPE
+    SYNTAX      INTEGER {
+        interface (1),
+        vlanname  (2)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This specifies whether interfaces or VLANs is mirrored.
+
+        Mirroring can be done on the basis of the interface name.All packets
+        received on a port configured for ingress mirroring is sent to the
+        analyzer port.All packets sent out on a port configured for egress
+        mirroring is sent to the analyzer port.Any number of network ports
+        can be configured for ingress or egress mirroring.The value one of
+        jnxAnalyzerInputType corresponds to mirroring the interface traffic.
+
+        On a particular switch, the user can choose to monitor all the ports
+        that belong to a particular VLAN. It is needed in order to analyze
+        the network traffic in one or more VLANs.Mirroring can be configured
+        in ingress direction only for VLAN.
+
+        Mirroring can be done on the basis of VLAN name (supported only in
+        ingress). All packets received on a particular VLAN are sent out to
+        the analyzer.The value two of jnxExAnalyzerInputType corresponds to
+        mirroring vlan traffic."
+    ::= { jnxExAnalyzerInputEntry 3 }
+
+END

mibs/juniper/JUNIPER-ATM-COS-MIB

@@ -0,0 +1,670 @@
+-- *******************************************************************
+-- Juniper enterprise specific ATM Class Of Service MIB. 
+--
+-- Copyright (c) 2002-2004, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+    JUNIPER-ATM-COS-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,
+        Integer32, Counter64                 FROM SNMPv2-SMI
+
+        ifIndex                              FROM IF-MIB
+        atmVclVpi, atmVclVci                 FROM ATM-MIB
+        jnxMibs                              FROM JUNIPER-SMI
+        jnxCosFcId                           FROM JUNIPER-COS-MIB;
+
+
+    jnxAtmCos MODULE-IDENTITY
+        LAST-UPDATED "200304090000Z" -- Fri Apr 09 2004 UTC
+        ORGANIZATION "Juniper Networks, Inc."
+        CONTACT-INFO
+                "Juniper Technical Assistance Center
+                      Juniper Networks, Inc.
+                      1133 Innovation Way
+                      Sunnyvale, CA 94089
+                      E-mail: support@juniper.net"
+
+        DESCRIPTION
+                "The Juniper enterprise MIB for ATM COS (Class Of
+                Service) infrastructure. For detailed information on ATM
+                COS, Junos Documentation is recommended as the
+                reference.
+
+                 Abbreviations:
+                     COS  - Class Of Service
+                     RED  - Random Early Detection
+                     PLP  - Packet Loss Priority"
+
+        REVISION     "200304090000Z" -- Fri Apr 09 2004 UTC
+        DESCRIPTION  "Exposed jnxCosAtmTrunkTable for COS enabled Trunks."
+
+        REVISION     "200306200000Z"   -- Jun 20th 2003
+        DESCRIPTION  "Add Per queue PLP stats for COS enabled VCs."
+
+        REVISION     "200209040000Z"   -- Sep 4th 2002 
+        DESCRIPTION  "Initial Version."
+
+        ::= { jnxMibs 21 }
+
+
+    -- 
+    -- ATM COS VC Table : represents VCs that have COS configured. 
+    --
+    jnxCosAtmVcTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxCosAtmVcEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table of ATM VCs which have COS configured."
+
+
+    ::= { jnxAtmCos 1 }
+
+    jnxCosAtmVcEntry OBJECT-TYPE
+        SYNTAX      JnxCosAtmVcEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION 
+            "This entry contains COS info specific to an ATM VC.
+	    Each entry is indexed using ifIndex, vpi and vci of
+	    the VC."
+        INDEX       { ifIndex, atmVclVpi, atmVclVci}
+    ::= { jnxCosAtmVcTable 1 }
+
+    JnxCosAtmVcEntry ::= 
+        SEQUENCE {
+            jnxCosAtmVcCosMode  INTEGER
+    }
+
+    jnxCosAtmVcCosMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        strict(0),
+                        alternate(1)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The mode of COS queue priority for the VC.
+
+             strict mode :
+             One queue of the four queues has strict high priority and
+             is always serviced before the rest of the queues. The
+             remaining queues are serviced in round robin fashion.
+
+             alternate mode :
+	     One queue has high priority, but the servicing of the
+	     queues alternates between the high priority queue and the
+	     rest of the queues."
+    ::= { jnxCosAtmVcEntry 1 }
+
+    --
+    -- ATM VC scheduler table
+    -- 
+    jnxCosAtmVcScTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxCosAtmVcScEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table of rows representing atm-scheduler config
+            parameters for each forwarding class within a specified VC.
+            
+            NOTE: These schedulers are specific to an atm interface and
+            are different from the typical schedulers specified under
+            class-of-service config in CLI. Hence, hereafter, through
+            out this mib, scheduler will be referred to as atm-scheduler
+            to avoid any confusion."
+
+
+    ::= { jnxAtmCos 2 }
+
+    jnxCosAtmVcScEntry OBJECT-TYPE
+        SYNTAX      JnxCosAtmVcScEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION 
+            "This entry represents atm-scheduler config parameters per
+            forwarding class and per VC."
+        INDEX       { ifIndex, atmVclVpi, atmVclVci, jnxCosFcId }
+
+    ::= { jnxCosAtmVcScTable 1 }
+
+    JnxCosAtmVcScEntry ::= 
+        SEQUENCE {
+             -- Scheduler parameters
+             jnxCosAtmVcScPriority             INTEGER,
+             jnxCosAtmVcScTxWeightType         INTEGER,
+             jnxCosAtmVcScTxWeight             Integer32,
+
+             -- Drop profile type
+             jnxCosAtmVcScDpType               INTEGER,
+
+             -- Linear RED drop profile info
+             jnxCosAtmVcScLrdpQueueDepth       Integer32,
+             jnxCosAtmVcScLrdpLowPlpThresh     Integer32,
+             jnxCosAtmVcScLrdpHighPlpThresh    Integer32,
+
+             -- Epd Drop profile
+             jnxCosAtmVcEpdThreshold           Integer32
+    }
+
+    -- Atm-scheduler parameters
+    jnxCosAtmVcScPriority OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        low(0),
+                        high(1)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm-scheduler priority for the queue associated with
+            the specified forwarding class within the specified VC."
+    ::= { jnxCosAtmVcScEntry 1 }
+
+    jnxCosAtmVcScTxWeightType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        cells(0),
+                        percent(1)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm-scheduler transmit-weight-type for the queue
+            associated with the specified forwarding class inside the
+            specified VC.
+
+            An atm-scheduler can specify the transmit-weight-type either
+            as number of cells or as a percentage of the queue size."  
+    ::= { jnxCosAtmVcScEntry 2 }
+
+    jnxCosAtmVcScTxWeight OBJECT-TYPE
+        SYNTAX      Integer32(0..32000)  
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The atm-scheduler's transmit weight for the queue
+            associated with the specified forwarding class and the
+            specified VC. This object value is either expressed in
+            units of cells or as a percentage of the total VC
+            bandwidth. The unit (value-type) can be determined using
+            the object jnxCosAtmVcScTxWeightType." 
+    ::= { jnxCosAtmVcScEntry 3 }
+
+    jnxCosAtmVcScDpType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        linearRed(0),
+                        epd(1)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of RED drop profile configured for the specified
+            forwarding class within the specified VC. A scheduler can
+            specify either linear or constant drop profile.
+
+            A constant type drop profile (aka EPD) specifies that when
+            the number of queued cells exceeds a threshold, all the
+            cells should be dropped. Whereas a linear type drop profile
+            specifies that only a percentage of cells be dropped based
+            on the number of queued cells at any time."
+    ::= { jnxCosAtmVcScEntry 4 }
+             
+    jnxCosAtmVcScLrdpQueueDepth OBJECT-TYPE
+        SYNTAX      Integer32(0..32000) 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The maximum queue size in cells, as specified by the linear
+            RED drop profile associated with the specified forwarding
+            class within the specified VC.
+
+            This object is valid only when value of object
+            jnxCosAtmVcScDpType is 'linearRed(0)'."
+    ::= { jnxCosAtmVcScEntry 5 }
+
+    jnxCosAtmVcScLrdpLowPlpThresh OBJECT-TYPE
+        SYNTAX      Integer32(0..32000) 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+	    "The threshold percentage of fill-level beyond which low PLP
+	    (Packet Loss Priority) packets belonging to the specified
+	    forwarding class within the specified VC are randomly
+	    dropped. This value is specified by linear RED drop profile
+	    config. 
+            
+            This object is valid only when value of object
+            jnxCosAtmVcScDpType is 'linearRed(0)'."
+    ::= { jnxCosAtmVcScEntry 6 }
+
+    jnxCosAtmVcScLrdpHighPlpThresh OBJECT-TYPE
+        SYNTAX      Integer32(0..32000) 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+	    "The threshold percentage of fill-level beyond which high
+	    PLP (Packet Loss Priority) packets belonging to the
+	    specified forwarding class within the specified VC are
+	    randomly dropped. This value is specified by linear RED drop
+	    profile config. 
+            
+            This object is valid only when jnxCosAtmVcScDpType is
+            'linearRed(0)'."
+    ::= { jnxCosAtmVcScEntry 7 }
+
+    jnxCosAtmVcEpdThreshold OBJECT-TYPE
+        SYNTAX      Integer32(0..32000) 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "If a EPD type drop profile is configured for this scheduler
+            and if the number of cells queued exceeds this threshold
+            value, all the cells in the queue are dropped.
+            
+            This object has valid value only when jnxCosAtmVcScDpType
+            is 'epd(1)'."
+    ::= { jnxCosAtmVcScEntry 8 }
+
+
+    -- 
+    -- ATM COS Queue Stats Table.
+    --
+    jnxCosAtmVcQstatsTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxCosAtmVcQstatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table of per VC and per forwarding class queue stats
+            entries." 
+
+
+    ::= { jnxAtmCos 3 }
+
+    jnxCosAtmVcQstatsEntry OBJECT-TYPE
+        SYNTAX      JnxCosAtmVcQstatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION 
+            "This entry contains queue stats for a specified
+            forwarding class and specified VC."
+        INDEX       { ifIndex, atmVclVpi, atmVclVci, jnxCosFcId }
+    ::= { jnxCosAtmVcQstatsTable 1 }
+
+    JnxCosAtmVcQstatsEntry ::= 
+        SEQUENCE {
+            jnxCosAtmVcQstatsOutPackets        Counter64,
+            jnxCosAtmVcQstatsOutBytes          Counter64,
+            jnxCosAtmVcQstatsOutRedDropPkts    Counter64,
+            jnxCosAtmVcQstatsOutNonRedDrops    Counter64,
+
+            -- PLP traffic stats
+            jnxCosAtmVcQstatsOutLpBytes        Counter64,
+            jnxCosAtmVcQstatsOutLpPkts         Counter64,
+
+            -- PLP drop stats
+            jnxCosAtmVcQstatsOutLpDropBytes    Counter64,
+            jnxCosAtmVcQstatsOutHpDropBytes    Counter64,
+            jnxCosAtmVcQstatsOutLpDropPkts     Counter64,
+            jnxCosAtmVcQstatsOutHpDropPkts     Counter64
+    }
+
+    jnxCosAtmVcQstatsOutPackets OBJECT-TYPE
+        SYNTAX      Counter64 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of packets belonging to the specified
+            forwarding class transmitted on the specified VC."
+    ::= { jnxCosAtmVcQstatsEntry 1 }
+
+    jnxCosAtmVcQstatsOutBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of bytes belonging to the specified forwarding
+            class that were transmitted on the specified VC."
+    ::= { jnxCosAtmVcQstatsEntry 2 }
+
+    jnxCosAtmVcQstatsOutRedDropPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of outgoing packets on the specified VC and
+            belonging to the specified forwarding class, that were
+            RED-dropped."
+    ::= { jnxCosAtmVcQstatsEntry 3 }
+
+    jnxCosAtmVcQstatsOutNonRedDrops OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of outgoing packets on the specified VC and
+            belonging to the specified forwarding class, that were
+            dropped not as a result of RED mechanism, but because of
+            errors in packets."
+    ::= { jnxCosAtmVcQstatsEntry 4 }
+
+    -- PLP traffic stats
+    jnxCosAtmVcQstatsOutLpBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) bytes transmitted." 
+    ::= { jnxCosAtmVcQstatsEntry 5 }
+
+    jnxCosAtmVcQstatsOutLpPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) packets transmitted." 
+    ::= { jnxCosAtmVcQstatsEntry 6 }
+
+    -- PLP drop stats
+    jnxCosAtmVcQstatsOutLpDropBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) bytes dropped at the output
+            queue." 
+    ::= { jnxCosAtmVcQstatsEntry 7 }
+
+    jnxCosAtmVcQstatsOutHpDropBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of high PLP (PLP1) bytes dropped at the output
+            queue." 
+    ::= { jnxCosAtmVcQstatsEntry 8 }
+
+    jnxCosAtmVcQstatsOutLpDropPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) packets dropped at the
+            output queue." 
+    ::= { jnxCosAtmVcQstatsEntry 9 }
+
+    jnxCosAtmVcQstatsOutHpDropPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of high PLP (PLP1) packets dropped at the
+            output queue." 
+    ::= { jnxCosAtmVcQstatsEntry 10 }
+
+
+    --
+    -- Juniper ATM Trunk Class of Service Table
+    --
+    jnxCosAtmTrunkTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF JnxCosAtmTrunkEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "A table of all ATM Trunk CoS entries. Stats and configuration
+            information is provided for each ATM Trunk CoS interface."
+
+
+        ::= { jnxAtmCos 4 }
+    
+    jnxCosAtmTrunkEntry OBJECT-TYPE
+        SYNTAX     JnxCosAtmTrunkEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "A single ATM Trunk CoS Entry."
+
+        INDEX  { ifIndex, jnxCosFcId }
+        ::= { jnxCosAtmTrunkTable 1 }
+
+
+    JnxCosAtmTrunkEntry ::= 
+        SEQUENCE {
+            -- Trunk CoS parameters
+            jnxCosAtmTrunkMode                   INTEGER,
+
+            -- Scheduler parameters
+            jnxCosAtmTrunkScPriority             INTEGER,
+            jnxCosAtmTrunkScTxWeightType         INTEGER,
+            jnxCosAtmTrunkScTxWeight             Integer32,
+            jnxCosAtmTrunkQaType                 INTEGER,
+
+            -- Epd Drop profile
+            jnxCosAtmTrunkEpdThresholdPlp0       Integer32,
+            jnxCosAtmTrunkEpdThresholdPlp1       Integer32,
+
+            -- Queue stats
+            jnxCosAtmTrunkQstatsOutPackets        Counter64,
+            jnxCosAtmTrunkQstatsOutBytes          Counter64,
+            jnxCosAtmTrunkQstatsOutDrops          Counter64,
+
+            -- Low PLP (PLP0) traffic stats
+            jnxCosAtmTrunkQstatsOutLpBytes        Counter64,
+            jnxCosAtmTrunkQstatsOutLpPkts         Counter64,
+
+            -- PLP drop stats
+            jnxCosAtmTrunkQstatsOutLpDropBytes    Counter64,
+            jnxCosAtmTrunkQstatsOutHpDropBytes    Counter64,
+            jnxCosAtmTrunkQstatsOutLpDropPkts     Counter64,
+            jnxCosAtmTrunkQstatsOutHpDropPkts     Counter64,
+
+            -- High PLP (PLP1) traffic stats
+            jnxCosAtmTrunkQstatsOutHpBytes        Counter64,
+            jnxCosAtmTrunkQstatsOutHpPkts         Counter64
+        }
+
+    jnxCosAtmTrunkMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        strict(1),
+                        alternate(2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The mode of COS queue priority for the Trunk.
+
+             strict mode :
+             One queue of the four queues has strict high priority and
+             is always serviced before the rest of the queues. The
+             remaining queues are serviced in round robin fashion.
+
+             alternate mode :
+             One queue has high priority, but the servicing of the
+             queues alternates between the high priority queue and the
+             rest of the queues."
+    ::= { jnxCosAtmTrunkEntry 1 }
+
+    -- Atm-scheduler parameters
+    jnxCosAtmTrunkScPriority OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        low(1),
+                        high(2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm-scheduler priority for the queue associated with
+            the specified forwarding class within the specified Trunk."
+    ::= { jnxCosAtmTrunkEntry 2 }
+
+    jnxCosAtmTrunkScTxWeightType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        cells(1),
+                        percent(2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm-scheduler transmit-weight-type for the queue
+            associated with the specified forwarding class inside the
+            specified Trunk.
+
+            An atm-scheduler can specify the transmit-weight-type either
+            as number of cells or as a percentage of the queue size."  
+    ::= { jnxCosAtmTrunkEntry 3 }
+
+    jnxCosAtmTrunkScTxWeight OBJECT-TYPE
+        SYNTAX      Integer32(0..32000)  
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The atm-scheduler's transmit weight for the queue
+            associated with the specified forwarding class and the
+            specified Trunk. This object value is either expressed in
+            units of cells or as a percentage of the total Trunk
+            bandwidth. The unit (value-type) can be determined using
+            the object jnxCosAtmTrunkScTxWeightType." 
+    ::= { jnxCosAtmTrunkEntry 4 }
+
+    jnxCosAtmTrunkQaType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        red(1),
+                        singleEpd(2),
+                        dualEpd(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm queue admission type used for the specified Trunk."
+    ::= { jnxCosAtmTrunkEntry 5 }
+
+    jnxCosAtmTrunkEpdThresholdPlp0 OBJECT-TYPE
+        SYNTAX      Integer32(0..32000)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "If an EPD type drop profile is configured for this
+            scheduler and if the number of cells queued exceeds this 
+            threshold value, all the cells which have plp equal to 0 
+            will be dropped.
+
+            This object has valid value only when jnxCosAtmTrunkQaType
+            is singleEpd or dualEpd."
+    ::= { jnxCosAtmTrunkEntry 6 }
+            
+    jnxCosAtmTrunkEpdThresholdPlp1 OBJECT-TYPE
+        SYNTAX      Integer32(0..32000)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "If a EPD type drop profile is configured for this scheduler
+            and if the number of cells queued exceeds this threshold
+            value, all the cells which have plp equal to 1 will be
+            dropped.
+
+            This object has valid value only when jnxCosAtmTrunkQaType
+            is dualEpd."
+    ::= { jnxCosAtmTrunkEntry 7 }
+
+    jnxCosAtmTrunkQstatsOutPackets OBJECT-TYPE
+        SYNTAX      Counter64 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of packets belonging to the specified
+            forwarding class transmitted on the specified Trunk."
+    ::= { jnxCosAtmTrunkEntry 8 }
+
+    jnxCosAtmTrunkQstatsOutBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of bytes belonging to the specified forwarding
+            class that were transmitted on the specified Trunk."
+    ::= { jnxCosAtmTrunkEntry 9 }
+
+    jnxCosAtmTrunkQstatsOutDrops OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of outgoing packets on the specified Trunk and
+            belonging to the specified forwarding class, that were
+            dropped." 
+    ::= { jnxCosAtmTrunkEntry 10 }
+
+    -- PLP traffic stats
+    jnxCosAtmTrunkQstatsOutLpBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) bytes transmitted." 
+    ::= { jnxCosAtmTrunkEntry 11 }
+
+    jnxCosAtmTrunkQstatsOutLpPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) packets transmitted." 
+    ::= { jnxCosAtmTrunkEntry 12 }
+
+    -- PLP drop stats
+    jnxCosAtmTrunkQstatsOutLpDropBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) bytes dropped at the output
+            queue." 
+    ::= { jnxCosAtmTrunkEntry 13 }
+
+    jnxCosAtmTrunkQstatsOutHpDropBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of high PLP (PLP1) bytes dropped at the output
+            queue." 
+    ::= { jnxCosAtmTrunkEntry 14 }
+
+    jnxCosAtmTrunkQstatsOutLpDropPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of low PLP (PLP0) packets dropped at the
+            output queue." 
+    ::= { jnxCosAtmTrunkEntry 15 }
+
+    jnxCosAtmTrunkQstatsOutHpDropPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of high PLP (PLP1) packets dropped at the
+            output queue." 
+    ::= { jnxCosAtmTrunkEntry 16 }
+
+    jnxCosAtmTrunkQstatsOutHpBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of high PLP (PLP1) bytes transmitted." 
+    ::= { jnxCosAtmTrunkEntry 17 }
+
+    jnxCosAtmTrunkQstatsOutHpPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The number of high PLP (PLP1) packets transmitted." 
+    ::= { jnxCosAtmTrunkEntry 18 }
+
+END

mibs/juniper/JUNIPER-ATM-MIB

@@ -0,0 +1,989 @@
+    --
+    -- Juniper Enterprise Specific ATM MIB. 
+    --
+    -- Copyright (c) 2001-2004, Juniper Networks, Inc.
+    -- All rights reserved.
+    --
+    -- The contents of this document are subject to change without notice.
+    --
+
+    JUNIPER-ATM-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,
+        Integer32, Counter32, Counter64 
+            FROM SNMPv2-SMI
+        TEXTUAL-CONVENTION
+            FROM SNMPv2-TC
+        InetAddressIPv4, InetAddressIPv6
+            FROM INET-ADDRESS-MIB
+        ifIndex
+            FROM IF-MIB
+        atmInterfaceConfEntry, atmVclEntry, atmVplEntry 
+            FROM ATM-MIB
+        jnxMibs
+            FROM JUNIPER-SMI;
+            
+    jnxAtm MODULE-IDENTITY
+        LAST-UPDATED "200312040000Z" -- Thu Dec 4 2003 UTC
+        ORGANIZATION "Juniper Networks, Inc."
+        CONTACT-INFO
+                "Juniper Technical Assistance Center
+                      Juniper Networks, Inc.
+                      1133 Innovation Way
+                      Sunnyvale, CA 94089
+                      E-mail: support@juniper.net"
+
+        DESCRIPTION
+                "The Juniper enterprise MIB for ATM interfaces and VCs"
+
+        REVISION    "200401060000Z"      -- Tue Jan 06 2004
+        DESCRIPTION "The following new objects were added:
+                     - jnxAtmVCOutOAMF5AISCells (jnxAtmVCTable).
+                     - jnxAtmTrunkOutOAMF4AISCells (jnxAtmTrunkTable)."
+
+        REVISION    "200312040000Z"      -- Thu Dec 4 2003 UTC
+        DESCRIPTION "New object 'jnxAtmIfL2CircuitMode' added to jnxAtmIfTable."
+
+        REVISION    "200309170000Z"      -- Wed Sept 17 2003
+        DESCRIPTION "New table 'jnxAtmTrunkTable' added."
+
+        REVISION    "200207040000Z"      -- 4th July 2002
+        DESCRIPTION "New table 'jnxAtmVpTable' added."
+
+        REVISION    "200201230000Z"      -- 23 Jan 2002
+        DESCRIPTION "Renamed atmTcc as atmTccVcMux.
+                     atmTccSnap encapsulation added."
+
+        REVISION    "200107080000Z"      -- 8 July, 2001
+        DESCRIPTION "Initial Version"
+
+        ::= { jnxMibs 10 }  
+                                                         
+
+
+    JnxAtmFlags ::= TEXTUAL-CONVENTION
+        STATUS       current
+        DESCRIPTION
+            "Flags related to the VC or Trunk." 
+        SYNTAX     BITS {
+                        inverseArpEnabled(0),
+                        ilmiEnabled(1),
+                        oamEnabled(2),
+                        shapingEnabled(3),
+                        passiveOam(4),
+                        multicast(5),
+                        closed(6),
+                        down(7),
+                        active(8),
+                        cosEnabled(9)
+                   }
+    
+
+    -- The ATM Physical Interface Table
+    --
+    -- This table augments atmInterfaceConfTable defined in ATM-MIB. 
+    --
+    jnxAtmIfTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxAtmIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table contains config and stats parameters, one entry per
+            physical interface (ATM port)."
+
+
+        ::= { jnxAtm 1 }
+    
+    jnxAtmIfEntry OBJECT-TYPE
+        SYNTAX      JnxAtmIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This entry contains additional ATM interface config and stats
+            objects, not covered in standard mibs. Each entry is an extension
+            of atmInterfaceConfEntry defined in ATM-MIB."
+        AUGMENTS { atmInterfaceConfEntry }
+        ::= { jnxAtmIfTable 1 }
+    
+    JnxAtmIfEntry ::=
+        SEQUENCE {
+            -- Config Info
+            jnxAtmIfPortType                INTEGER,
+            jnxAtmIfEncaps                  INTEGER,
+            jnxAtmIfLpBackInfo              INTEGER,
+            jnxAtmIfScrambleEnable          INTEGER,
+            
+            -- Cell Stats
+            jnxAtmIfTxCellCount             Counter64,
+            jnxAtmIfRxCellCount             Counter64,     
+            jnxAtmIfTxIdleCellCount         Counter64,
+            jnxAtmIfUncorrHCSErrs           Counter64, 
+            jnxAtmIfCorrHCSErrs             Counter64, 
+            jnxAtmIfTxCellFIFOOverRuns      Counter64,
+            jnxAtmIfRxCellFIFOOverRuns      Counter64,
+            jnxAtmIfRxCellFIFOUnderRuns     Counter64,
+            jnxAtmIfInInvalidVCCells        Counter64,
+            jnxAtmIfInNoBufferOAMCells      Counter64,
+        
+            -- AAL5 Packet stats
+            jnxAtmIfInNoBufDropPkts         Counter64,
+            jnxAtmIfOutVCQueueDrops         Counter64,
+            jnxAtmIfInBadCrcs               Counter64,
+            jnxAtmIfInLenErrPkts            Counter64,
+            jnxAtmIfInTimeoutPkts           Counter64,
+
+            -- Misc Info
+            jnxAtmIfL2CircuitMode           INTEGER
+        }
+    
+    jnxAtmIfPortType OBJECT-TYPE 
+        SYNTAX      INTEGER {
+                        other(1),
+                        oc3(2),
+                        oc12(3),
+                        t3(4),
+                        e3(5),
+                        oc48(6)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The physical port type." 
+        ::= { jnxAtmIfEntry 1 }
+    
+    jnxAtmIfEncaps OBJECT-TYPE 
+        SYNTAX      INTEGER {
+                        other(1),
+                        atmPvc(2),
+                        atmCccCellRelay(3) 
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "ATM physical link layer encapsulation." 
+        DEFVAL { atmPvc }
+        ::= { jnxAtmIfEntry 2 }
+    
+    jnxAtmIfLpBackInfo OBJECT-TYPE 
+        SYNTAX      INTEGER {
+                        noLoopBack(1),
+                        localLoopBack(2),
+                        remoteLoopBack(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Loop back config and type." 
+        ::= { jnxAtmIfEntry 3 }
+    
+    jnxAtmIfScrambleEnable OBJECT-TYPE       
+        SYNTAX      INTEGER { enabled(1), disabled(2) }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Shows whether scrambling is enabled or disabled" 
+        DEFVAL { disabled }
+        ::= { jnxAtmIfEntry 4 }
+    
+    -- Cell Stats 
+    jnxAtmIfTxCellCount OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of ATM cells transmitted by the interface.
+             Includes Idle cells transmitted."
+        ::= { jnxAtmIfEntry 5 }
+    
+    jnxAtmIfRxCellCount OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of ATM cells received by the interface.
+             Excludes Idle cells received."
+        ::= { jnxAtmIfEntry 6 }
+    
+    jnxAtmIfTxIdleCellCount OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of idle cells sent by the port. When the ATM interface
+            has nothing to send, it sends idle cells to fill the time slot."
+        ::= { jnxAtmIfEntry 7 }
+    
+    jnxAtmIfUncorrHCSErrs OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of uncorrectable cell Header Check Sequence (HCS) Errors
+            that occurred."
+        ::= { jnxAtmIfEntry 8 }
+    
+    jnxAtmIfCorrHCSErrs OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of correctable cell Header Check Sequence (HCS) Errors
+            that occurred."
+        ::= { jnxAtmIfEntry 9 }
+    
+    jnxAtmIfTxCellFIFOOverRuns OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of overruns in the Transmit FIFO."
+        ::= { jnxAtmIfEntry 10 }
+    
+    jnxAtmIfRxCellFIFOOverRuns OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of overruns in the Receive FIFO."
+        ::= { jnxAtmIfEntry 11 }
+    
+    jnxAtmIfRxCellFIFOUnderRuns OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of underruns in the receive FIFO."
+        ::= { jnxAtmIfEntry 12 }
+    
+    jnxAtmIfInInvalidVCCells OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of Cells that arrived for non existent VC."
+        ::= { jnxAtmIfEntry 13 }
+
+    jnxAtmIfInNoBufferOAMCells OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of received OAM cells or raw cells dropped because 
+            no buffers were available to handle them."
+        ::= { jnxAtmIfEntry 14 }
+
+
+    -- AAL5 Pkt Stats
+    jnxAtmIfInNoBufDropPkts OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of AAL5 packets dropped because there was no enough
+            buffer to handle them."
+        ::= { jnxAtmIfEntry 15 }
+
+    jnxAtmIfOutVCQueueDrops OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets dropped because of queue limits on each VC."
+        ::= { jnxAtmIfEntry 16 }
+
+    jnxAtmIfInBadCrcs OBJECT-TYPE  
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of incoming CRC errors."
+        ::= { jnxAtmIfEntry 17 }
+                
+    jnxAtmIfInLenErrPkts OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of AAL5 packets dropped because their length was incorrect."
+        ::= { jnxAtmIfEntry 18 }
+    
+    jnxAtmIfInTimeoutPkts OBJECT-TYPE 
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of AAL5 packets dropped because of reassembly timeout."
+        ::= { jnxAtmIfEntry 19 }
+
+    jnxAtmIfL2CircuitMode OBJECT-TYPE 
+        SYNTAX      INTEGER {
+                        notApplicable(1),
+                        none(2),
+                        aal5(3),
+                        cell(4),
+                        uniTrunk(5),
+                        nniTrunk(6)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The layer 2 circuit mode of this Atm interface.  Note, this
+            applies only to interfaces on AtmII pics."
+        ::= { jnxAtmIfEntry 20 }
+     
+    --
+    -- Juniper ATM Virtual Circuit Table
+    --
+    -- This table augments the atmVclTable defined in ATM-MIB.
+    --
+    jnxAtmVCTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF JnxAtmVCEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "A table of all p2p/p2mp/multicast VC entries."
+
+
+        ::= { jnxAtm 2 }
+    
+    jnxAtmVCEntry OBJECT-TYPE
+        SYNTAX     JnxAtmVCEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "Special Cases: 
+             - No traffic Stats for multicast VCs. (0 by default).
+             - Multipoint Destination IP Address for a p2p vc is 
+               invalid (0.0.0.0 by default).
+             - When the encapsulation type for the logical interface 
+               (to which VC belongs) is 'atmCccCellRelay', only 
+               Generic VC Info is valid.
+             - If OAM is disabled (indicated in jnxAtmVCFlags),
+               then all the OAM config & F5 stats info is invalid.
+               (zeroed by default)."
+        AUGMENTS { atmVclEntry }
+        ::= { jnxAtmVCTable 1 }
+    
+    JnxAtmVCEntry ::=
+        SEQUENCE {
+            -- Generic VC Info
+            jnxAtmVCConnType           INTEGER,
+            jnxAtmVCEncapsulation      INTEGER,
+            jnxAtmVCMpDestIPv4Addr     InetAddressIPv4,
+            jnxAtmVCMpDestIPv6Addr     InetAddressIPv6,
+            jnxAtmVCFlags              JnxAtmFlags,
+            jnxAtmVCTotalDownTime      Integer32,
+
+            -- Traffic stats
+            jnxAtmVCInBytes            Counter64,
+            jnxAtmVCOutBytes           Counter64,
+            jnxAtmVCInPkts             Counter64,
+            jnxAtmVCOutPkts            Counter64,    
+            jnxAtmVCTailQueuePktDrops  Counter64,
+    
+            -- OAM Config 
+            jnxAtmVCOAMPeriod          Integer32,
+            jnxAtmVCOAMUpCellCount     Integer32,
+            jnxAtmVCOAMDownCellCount   Integer32,
+
+            -- OAM F5 Cell Stats
+            jnxAtmVCInOAMF5LoopCells   Counter32,
+            jnxAtmVCOutOAMF5LoopCells  Counter32,
+            jnxAtmVCInOAMF5RDICells    Counter32,
+            jnxAtmVCOutOAMF5RDICells   Counter32,
+            jnxAtmVCInOAMF5AISCells    Counter32,
+            jnxAtmVCOutOAMF5AISCells   Counter32
+         }
+    
+    jnxAtmVCConnType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        other(1),
+                        p2p(2),        -- point-to-point
+                        p2mp(3),       -- point-to-multipoint
+                        multicast(4) 
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The type of connection.  The type 'other' means vc type is unknown
+            or is not one of the other types."
+        ::= { jnxAtmVCEntry 1 }
+    
+     jnxAtmVCEncapsulation OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        other(1),
+                        atmCccCellRelay(2),
+                        atmCccVcMux(3),     
+                        atmCiscoNlpid(4),   
+                        atmNlpid(5),        
+                        atmSnap(6),        
+                        atmVcMux(7),
+                        atmTccVcMux(8),
+                        atmTccSnap(9)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm encapsulation type associated with the VC. 
+                atmCccCellRelay : ATM Cell Relay for CCC
+                atmCccVcMux     : ATM VC for CCC
+                atmCiscoNlpid   : Cisco-compatible ATM NLPID encapsulation
+                atmNlpid        : ATM NLPID encapsulation
+                atmSnap         : ATM LLC/SNAP encapsulation
+                atmVcMux        : ATM VC multiplexing
+                atmTccVcMux     : TCC (Translational Cross Connection)
+                                  over ATM VC MUX encapsulation 
+                atmTccSnap      : TCC (Translational Cross Connection)
+                                  over ATM LLC/SNAP encapsulation"
+        ::= { jnxAtmVCEntry 2}
+
+    jnxAtmVCMpDestIPv4Addr OBJECT-TYPE
+        SYNTAX      InetAddressIPv4    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object is meaningful only if jnxAtmVCConnType value is 
+            'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint 
+             destination IPv4 address. When the VC connection type is other
+             than p2mp OR when the multipoint destination address type is of
+             IPv6, this object returns 0.0.0.0 by default." 
+        ::= { jnxAtmVCEntry 3 }
+    
+    jnxAtmVCMpDestIPv6Addr OBJECT-TYPE
+        SYNTAX      InetAddressIPv6    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object is meaningful only if jnxAtmVCConnType value is 
+            'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint 
+             destination IPv6 address. When the VC connection type is other
+             than p2mp OR when the multipoint destination address type is of
+             IPv4, this object returns all the bytes of addr filled with 0." 
+        ::= { jnxAtmVCEntry 4 }
+
+    jnxAtmVCFlags    OBJECT-TYPE
+        SYNTAX      JnxAtmFlags
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Flags related to the VC." 
+        ::= { jnxAtmVCEntry 5 }
+    
+    jnxAtmVCTotalDownTime OBJECT-TYPE
+        SYNTAX      Integer32 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total VC down time in seconds ever since the system rebooted."
+        ::= { jnxAtmVCEntry 6 }
+        
+    -- Traffic Stats
+    jnxAtmVCInBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes received on the VC."
+        ::= { jnxAtmVCEntry 7 }
+    
+    jnxAtmVCOutBytes OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes sent out on the VC."
+        ::= { jnxAtmVCEntry 8 }
+    
+    jnxAtmVCInPkts OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets received on the VC."
+        ::= { jnxAtmVCEntry 9 }
+    
+    jnxAtmVCOutPkts OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets sent out on the VC."
+        ::= { jnxAtmVCEntry 10 }
+    
+    jnxAtmVCTailQueuePktDrops OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets dropped due to bandwidth constraints. 
+            Indicates that packets were queued to send out at a rate faster 
+            than allowed."
+        ::= { jnxAtmVCEntry 11 }
+
+    -- OAM Config
+    jnxAtmVCOAMPeriod OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This time interval indicates how often the F5 cells are sent to
+            know the status of the VC."
+        ::= { jnxAtmVCEntry 12 }
+    
+    jnxAtmVCOAMUpCellCount OBJECT-TYPE
+        SYNTAX      Integer32    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The minimum number of loopback cells to be received to declare 
+            that the VC is up."
+        ::= { jnxAtmVCEntry 13 }
+    
+    jnxAtmVCOAMDownCellCount OBJECT-TYPE
+        SYNTAX      Integer32            
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The minimum number of loopback cells to be received to declare 
+            that the VC is down. This object would have zero value if OAM is
+            not enabled. (indicated in jnxAtmVCFlags)"
+        ::= { jnxAtmVCEntry 14 }
+
+    -- OAM F5 Stats
+    jnxAtmVCInOAMF5LoopCells OBJECT-TYPE 
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F5 loopback cells received. This object would 
+            have zero value if OAM (as indicated in jnxAtmVCFlags) is not 
+            enabled."
+        ::= { jnxAtmVCEntry 15 }
+
+    jnxAtmVCOutOAMF5LoopCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F5 loopback cells sent. This object would have
+            zero value if OAM (as indicated in jnxAtmVCFlags) is not 
+            enabled." 
+        ::= { jnxAtmVCEntry 16 }
+    
+    jnxAtmVCInOAMF5RDICells OBJECT-TYPE 
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F5 cells received, with RDI(Remote Defect 
+            Indication) bit set. This object would have zero value if OAM 
+            (as indicated in jnxAtmVCFlags) is not enabled."
+        ::= { jnxAtmVCEntry 17 }
+    
+    jnxAtmVCOutOAMF5RDICells OBJECT-TYPE 
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F5 cells transmitted, with RDI(Remote Defect
+            Indication) bit set. This object would have zero value if OAM 
+            (as indicated in jnxAtmVCFlags) is not enabled."
+        ::= { jnxAtmVCEntry 18 }
+    
+    jnxAtmVCInOAMF5AISCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F5 cells received, with AIS(Alarm Indication
+            Signal) bit set. This object would have zero value if OAM (as 
+            indicated in jnxAtmVCFlags) is not enabled."
+        ::= { jnxAtmVCEntry 19 }
+
+    jnxAtmVCOutOAMF5AISCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F5 cells transmitted, with AIS (Alarm
+            Indication Signal) bit set. This object would have zero
+            value if OAM (as indicated in jnxAtmVCFlags) is not
+            enabled."
+        ::= { jnxAtmVCEntry 20 }
+
+    --
+    -- Juniper ATM VP (Virtual Path) table 
+    --
+    -- This table augments the atmVplTable defined in ATM-MIB.
+    --
+    jnxAtmVpTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxAtmVpEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The table of ATM VPs. This table augments atmVplTable
+            defined in standard ATM mib."
+
+
+        ::= { jnxAtm 3 }
+
+    jnxAtmVpEntry OBJECT-TYPE
+        SYNTAX      JnxAtmVpEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Each entry represents config, status and statistics info related
+            to an ATM VP configured. This entry augments the atmVplEntry
+            defined in standard ATM mib (RFC 2515). So ifIndex and VPI are the
+            indices to this table.
+
+            Caveats:
+            - Traffic stats are available per VP tunnel, only if shaping is
+              configured on the VP. Object 'jnxAtmVpFlags' can be used to
+              determine if shaping is enabled.
+
+            - When no OAM is configured, OAM config and OAM stat objects'
+              values are invalid (zero by default). Object 'jnxAtmVpFlags'
+              contains info on whether OAM is configured or not.
+            
+            - For atm-1 VPs, the only valid object is jnxAtmVpFlags." 
+        AUGMENTS { atmVplEntry }
+        ::= { jnxAtmVpTable 1 }
+
+    JnxAtmVpEntry ::= 
+        SEQUENCE {
+            -- VP Generic Info
+            jnxAtmVpFlags                 BITS,
+            jnxAtmVpTotalDownTime         Integer32,
+
+            -- VP OAM config
+            jnxAtmVpOamPeriod             Integer32,
+            jnxAtmVpOamUpCellCount        Integer32,
+            jnxAtmVpOamDownCellCount      Integer32,
+
+            -- VP Traffic Stats
+            jnxAtmVpInBytes               Counter64,
+            jnxAtmVpOutBytes              Counter64,
+            jnxAtmVpInPkts                Counter64,
+            jnxAtmVpOutPkts               Counter64,
+
+            -- VP OAM F4 Cell Stats
+            jnxAtmVpInOamF4Cells          Counter32,
+            jnxAtmVpOutOamF4Cells         Counter32,
+            jnxAtmVpInOamF4LoopCells      Counter32,
+            jnxAtmVpOutOamF4LoopCells     Counter32,
+            jnxAtmVpInOamF4RdiCells       Counter32,
+            jnxAtmVpOutOamF4RdiCells      Counter32,
+            jnxAtmVpInOamF4AisCells       Counter32
+        }
+
+    -- VP Generic Info
+    jnxAtmVpFlags OBJECT-TYPE
+        SYNTAX      BITS {
+                            active(0),
+                            down(1),
+                            oamEnabled(2),
+                            shapingEnabled(3),
+                            passiveOam(4)
+                         }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The flags associated with this VP."
+        ::= { jnxAtmVpEntry 1 }
+
+    jnxAtmVpTotalDownTime OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The total VP downtime in seconds, ever since the system rebooted."
+        ::= { jnxAtmVpEntry 2 }
+
+
+    -- VP OAM config
+    jnxAtmVpOamPeriod OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "This time interval indicates how often the OAM F4 cells are sent
+           to determine the status of the VP. The value of this object is zero
+           when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used
+           to determine if OAM is enabled."
+        ::= { jnxAtmVpEntry 3 }
+
+    jnxAtmVpOamUpCellCount OBJECT-TYPE
+        SYNTAX      Integer32 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The minimum number of consecutive loopback cells to be received to
+           declare that the VP is up. The value of this object is zero when
+           OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to
+           determine if OAM is enabled."
+        ::= { jnxAtmVpEntry 4 }
+
+    jnxAtmVpOamDownCellCount OBJECT-TYPE
+        SYNTAX      Integer32 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The minimum number of consecutive loopback cells to be received to
+           declare that the VP is down. The value of this object is zero when
+           OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to
+           determine if OAM is enabled."
+        ::= { jnxAtmVpEntry 5 }
+
+    -- VP Traffic stats 
+    jnxAtmVpInBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of bytes received on the VP."
+        ::= { jnxAtmVpEntry 6 }
+
+    jnxAtmVpOutBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of bytes sent out on the VP."
+        ::= { jnxAtmVpEntry 7 }
+
+    jnxAtmVpInPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of packets received on the VP."
+        ::= { jnxAtmVpEntry 8 }
+
+    jnxAtmVpOutPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of packets sent out on the VP."
+        ::= { jnxAtmVpEntry 9 }
+
+    -- VP OAM F4 stats
+    jnxAtmVpInOamF4Cells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 cells received on the VP."
+        ::= { jnxAtmVpEntry 10 }
+
+    jnxAtmVpOutOamF4Cells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 cells transmitted on the VP."
+        ::= { jnxAtmVpEntry 11 }
+
+    jnxAtmVpInOamF4LoopCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 loopback cells received on the VP."
+        ::= { jnxAtmVpEntry 12 }
+
+    jnxAtmVpOutOamF4LoopCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 cells transmitted on the VP."
+        ::= { jnxAtmVpEntry 13 }
+
+    jnxAtmVpInOamF4RdiCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 RDI cells received on the VP."
+        ::= { jnxAtmVpEntry 14 }
+
+    jnxAtmVpOutOamF4RdiCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 RDI cells transmitted on the VP."
+        ::= { jnxAtmVpEntry 15 }
+
+    jnxAtmVpInOamF4AisCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of OAM F4 AIS cells received on the VP."
+        ::= { jnxAtmVpEntry 16 }
+
+
+    --
+    -- Juniper ATM Trunk Table
+    --
+    jnxAtmTrunkTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF JnxAtmTrunkEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "A table of all ATM Trunk entries."
+
+
+        ::= { jnxAtm 4 }
+    
+    jnxAtmTrunkEntry OBJECT-TYPE
+        SYNTAX     JnxAtmTrunkEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "Special Cases: 
+             - When the encapsulation type for the logical interface 
+               (to which Trunk belongs) is 'atmCccCellRelay', only 
+               Generic Trunk Info is valid."
+        INDEX  { ifIndex }
+
+        ::= { jnxAtmTrunkTable 1 }
+    
+    JnxAtmTrunkEntry ::=
+        SEQUENCE {
+            jnxAtmTrunkId              Integer32,
+
+            -- Generic Trunk Info
+            jnxAtmTrunkConnType           INTEGER,
+            jnxAtmTrunkEncapsulation      INTEGER,
+            jnxAtmTrunkFlags              JnxAtmFlags,
+            jnxAtmTrunkTotalDownTime      Integer32,
+
+            -- Traffic stats
+            jnxAtmTrunkInBytes            Counter64,
+            jnxAtmTrunkOutBytes           Counter64,
+            jnxAtmTrunkInPkts             Counter64,
+            jnxAtmTrunkOutPkts            Counter64,    
+            jnxAtmTrunkTailQueuePktDrops  Counter64,
+    
+            -- OAM F4 Cell Stats
+            jnxAtmTrunkInOAMF4AISCells    Counter32,
+            jnxAtmTrunkOutOAMF4AISCells   Counter32
+        }
+
+    jnxAtmTrunkId OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The identifier for this ATM Trunk."
+        ::= { jnxAtmTrunkEntry 1 }
+
+    jnxAtmTrunkConnType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        other(1),
+                        p2p(2)        -- point-to-point
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The type of connection.  The type 'other' means trunk type is 
+            unknown or is not one of the other types."
+        ::= { jnxAtmTrunkEntry 2 }
+    
+     jnxAtmTrunkEncapsulation OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        other(1),
+                        atmCccCellRelay(2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "The atm encapsulation type associated with the VC or Trunk. 
+                atmCccCellRelay : ATM Cell Relay for CCC"
+        ::= { jnxAtmTrunkEntry 3 }
+
+    jnxAtmTrunkFlags    OBJECT-TYPE
+        SYNTAX      JnxAtmFlags
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Flags related to the Trunk." 
+        ::= { jnxAtmTrunkEntry 4 }
+    
+    jnxAtmTrunkTotalDownTime OBJECT-TYPE
+        SYNTAX      Integer32 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total Trunk down time in seconds ever since the system rebooted."
+        ::= { jnxAtmTrunkEntry 5 }
+        
+    -- Traffic Stats
+    jnxAtmTrunkInBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes received on the Trunk."
+        ::= { jnxAtmTrunkEntry 6 }
+    
+    jnxAtmTrunkOutBytes OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes sent out on the Trunk."
+        ::= { jnxAtmTrunkEntry 7 }
+    
+    jnxAtmTrunkInPkts OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets received on the Trunk."
+        ::= { jnxAtmTrunkEntry 8 }
+    
+    jnxAtmTrunkOutPkts OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets sent out on the Trunk."
+        ::= { jnxAtmTrunkEntry 9 }
+    
+    jnxAtmTrunkTailQueuePktDrops OBJECT-TYPE
+        SYNTAX      Counter64    
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets dropped due to bandwidth constraints. 
+            Indicates that packets were queued to send out at a rate faster 
+            than allowed."
+        ::= { jnxAtmTrunkEntry 10 }
+
+    -- OAM F4 Stats
+    
+    jnxAtmTrunkInOAMF4AISCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F4 cells received, with AIS(Alarm Indication
+            Signal) bit set."
+        ::= { jnxAtmTrunkEntry 15 }
+
+    jnxAtmTrunkOutOAMF4AISCells OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of OAM F4 cells sent, with AIS(Alarm Indication
+            Signal) bit set."
+        ::= { jnxAtmTrunkEntry 16 }
+
+END

mibs/juniper/JUNIPER-BFD-MIB

@@ -0,0 +1,177 @@
+JUNIPER-BFD-MIB DEFINITIONS ::= BEGIN  
+   IMPORTS 
+      MODULE-IDENTITY, OBJECT-TYPE,  
+      Unsigned32, NOTIFICATION-TYPE
+         FROM SNMPv2-SMI                        -- [RFC2578]
+    
+      bfdSessIndex 
+         FROM BFD-STD-MIB                       -- [jnx-bfd-exp]
+
+      DisplayString, TimeStamp, TruthValue
+         FROM SNMPv2-TC
+
+      jnxBfdMibRoot                             -- [jnx-smi] 
+         FROM JUNIPER-SMI
+   ; 
+    
+   jnxBfdMib MODULE-IDENTITY 
+      LAST-UPDATED "200610121200Z"  -- 12 Oct 2006 12:00:00 EST 
+      ORGANIZATION "IETF" 
+      CONTACT-INFO 
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+      DESCRIPTION 
+          "Provides BFD specific data." 
+    
+      -- Revision history. 
+      REVISION 
+          "200610121200Z"  -- 12 Oct 2006 12:00:00 EST 
+      DESCRIPTION 
+          "Initial version." 
+   ::= { jnxBfdMibRoot 1 }
+
+   -- Top level components of this MIB module. 
+
+   jnxBfdNotification   OBJECT IDENTIFIER ::= { jnxBfdMib 0 }
+
+   jnxBfdObjects       OBJECT IDENTIFIER ::= { jnxBfdMib 1 }
+
+   jnxBfdNotifyObjects OBJECT IDENTIFIER ::= { jnxBfdMib 2 }
+
+   --  BFD Session Extn Table
+   --  This table is a juniper extn to jnxSessTable
+
+   jnxBfdSessTable OBJECT-TYPE
+      SYNTAX   SEQUENCE OF JnxBfdSessEntry
+      MAX-ACCESS   not-accessible
+      STATUS   current
+      DESCRIPTION
+              "Defines the jnxBfd Session Table for providing enterprise 
+               specific options to the corresponding bfdSessTable entry."
+      ::= { jnxBfdObjects 1 }
+
+   jnxBfdSessEntry OBJECT-TYPE
+      SYNTAX      JnxBfdSessEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+              "Defines an entry in the jnxBfdSessTable.  This essentially
+               augments the bfdSessTable with additional objects." 
+      INDEX { bfdSessIndex }
+      ::= { jnxBfdSessTable 1 }
+
+   JnxBfdSessEntry ::=
+      SEQUENCE {
+         jnxBfdSessThreshTxInterval        Unsigned32,
+         jnxBfdSessCurrTxInterval          Unsigned32,
+         jnxBfdSessThreshDectTime          Unsigned32,
+         jnxBfdSessCurrDectTime            Unsigned32,
+         jnxBfdSessIntfName                DisplayString
+      }
+
+   jnxBfdSessThreshTxInterval OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The threshold value for transmit interval in microseconds.  
+           If the current transmit interval value adapts to a value 
+           greater than the  threshold value, jnxBfdSessTxIntervalHigh 
+           trap is raised."
+      ::= { jnxBfdSessEntry 1}
+
+   jnxBfdSessCurrTxInterval OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current transmit interval in microseconds." 
+      ::= { jnxBfdSessEntry 2}
+
+   jnxBfdSessThreshDectTime OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The threshold value for detection time in microseconds.  
+           If the current detection time value is greater than the  
+           threshold value at the time when session state changes 
+           to up(1), jnxBfdSessDetectionTimeHigh trap is raised."
+      ::= { jnxBfdSessEntry 3}
+
+   jnxBfdSessCurrDectTime OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only 
+      STATUS      current
+      DESCRIPTION
+          "The actual value of detection time for the session."
+      ::= { jnxBfdSessEntry 4} 
+
+   jnxBfdSessIntfName OBJECT-TYPE
+      SYNTAX      DisplayString
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "This object specifies the interface associated with 
+         the bfd session"
+      ::= { jnxBfdSessEntry 5}
+
+      -- Notification Objects 
+
+   jnxBfdSessifName OBJECT-TYPE
+      SYNTAX      DisplayString
+      MAX-ACCESS  accessible-for-notify
+      STATUS      current
+      DESCRIPTION
+         "This object gives the Interface Name in the bfdSessUp and 
+	  bfdSessDown trap. Even though this object doesnt appear in 
+	  the OBJECTS list of these traps, but the agent relay this 
+	  information as an extra parameter in the trap."
+      ::= { jnxBfdNotifyObjects 1}
+
+   -- Notification Configuration
+  
+   jnxBfdSessTxIntervalHigh NOTIFICATION-TYPE 
+      OBJECTS     {jnxBfdSessThreshTxInterval, 
+                   jnxBfdSessCurrTxInterval 
+      } 
+      STATUS      current 
+      DESCRIPTION 
+          "This notification is generated when the threshold value for 
+           transmit interval (jnxBfdSessThreshTxInterval) is set and 
+           the bfd session transmit interval (jnxBfdSessCurrTxInterval)
+           adapts to a value greater than the threshold value. This trap 
+           is sent only once, when we first exceed the threshold. The 
+           transmit interval can continue  to adapt beyond the threshold 
+           value. Adaptation of transmit interval happens due to network 
+           issues causing the BFD session to go down on either the local 
+           system or the remote neighbor."
+      ::= { jnxBfdNotification 1 } 
+ 
+ 
+   jnxBfdSessDetectionTimeHigh  NOTIFICATION-TYPE 
+      OBJECTS     {jnxBfdSessThreshDectTime, 
+                   jnxBfdSessCurrDectTime 
+      } 
+      STATUS      current 
+      DESCRIPTION 
+          "This notification is generated when the threshold value for 
+           detection time (jnxBfdSessThreshDectTime) is set and the bfd 
+           session detection-time (jnxBfdSessCurrDectTime) adapts to a 
+           value greater than the threshold value. This trap is sent only 
+           once, when we first exceed the threshold. The detection-time 
+           can continue to adapt beyond the threshold value. Adaptation 
+           of detection-time happens due to network issues causing the 
+           BFD session to go down on either the local system or the remote 
+           neighbor."
+      ::= { jnxBfdNotification 2 } 
+ 
+END   

mibs/juniper/JUNIPER-CFGMGMT-MIB

@@ -0,0 +1,308 @@
+--
+-- Juniper Enterprise Specific MIB: Configuration Management MIB Extension
+-- 
+-- Copyright (c) 2002-2003, 2006, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-CFGMGMT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    DisplayString, DateAndTime, TEXTUAL-CONVENTION
+          FROM SNMPv2-TC
+    jnxMibs, jnxCmNotifications
+        FROM JUNIPER-SMI;
+
+jnxCfgMgmt MODULE-IDENTITY
+    LAST-UPDATED "200310240000Z" -- Wed Nov 19 00:00:00 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This MIB module defines objects used for managing the 
+            configuration of Juniper products."
+    REVISION      "200311190000Z"
+    DESCRIPTION
+               "Added Rescue Configuration Management."
+    REVISION      "200310240000Z" 
+    DESCRIPTION
+               "Added JnxCmCfChgSource TEXTUAL-CONVENTION."
+    REVISION      "200205100000Z" 
+    DESCRIPTION
+               "Initial revision."
+    ::= { jnxMibs 18 }
+
+
+--
+-- Textual Conventions
+-- 
+JnxCmCfChgSource ::= TEXTUAL-CONVENTION
+        STATUS       current 
+        DESCRIPTION  "Identifies the source of config event."
+        SYNTAX       INTEGER {
+                         other       (1),
+                         cli         (2),
+                         junoscript  (3),
+                         synchronize (4),
+                         snmp        (5),
+                         button      (6),
+                         autoinstall (7),
+                         unknown     (8)
+                     }
+
+JnxCmRescueCfgState ::= TEXTUAL-CONVENTION
+        STATUS       current
+        DESCRIPTION  "Identifies the state of the rescue configuration."
+        SYNTAX       INTEGER {
+                         nonexistant (1),
+                         updated     (2)
+                     }
+                      
+--
+-- Configuration Change Management
+--
+
+jnxCmCfgChg OBJECT IDENTIFIER ::= { jnxCfgMgmt 1 }
+
+jnxCmCfgChgLatestIndex OBJECT-TYPE
+        SYNTAX     Integer32 (1..2147483647)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The index in jnxCmCfgChgEventTable for the latest configuration
+                change event."
+        ::= { jnxCmCfgChg 1 }
+
+jnxCmCfgChgLatestTime OBJECT-TYPE
+	SYNTAX     TimeTicks
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The value of sysUpTime when the configuration was last 
+                changed.
+
+                If the management subsystem was reset after the last
+		configuration change, this object will return 0."
+	::= { jnxCmCfgChg 2 }
+
+jnxCmCfgChgLatestDate OBJECT-TYPE
+	SYNTAX     DateAndTime
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The date and time when the configuration was last changed."
+	::= { jnxCmCfgChg 3 }
+
+jnxCmCfgChgLatestSource OBJECT-TYPE
+        SYNTAX     JnxCmCfChgSource 
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The source of the configuration event."
+        ::= { jnxCmCfgChg 4 }
+                
+jnxCmCfgChgLatestUser OBJECT-TYPE
+        SYNTAX     DisplayString
+        MAX-ACCESS read-only  
+        STATUS     current
+        DESCRIPTION
+                "The name of the logged in user.  The length is zero if
+                not available or not applicable."
+        ::= { jnxCmCfgChg 5 }
+
+jnxCmCfgChgMaxEventEntries OBJECT-TYPE
+	SYNTAX     Integer32 (0..2147483647)
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The maximum number of entries that can be held in
+		jnxCmCfgChgEventTable."
+	::= { jnxCmCfgChg 6 }
+
+--
+-- The folowing table provides a history of the most recent configuration
+-- change events.  The number of events stored in the table is identified
+-- by jnxCmCfgChgMaxEventEntries.  When the number of entries exceeds
+-- jnxCmCfgChgMaxEventEntries, each new entry will push the oldest entry
+-- out of the table.
+--
+
+jnxCmCfgChgEventTable OBJECT-TYPE
+	SYNTAX     SEQUENCE OF JnxCmCfgChgEventEntry
+	MAX-ACCESS not-accessible
+	STATUS     current
+	DESCRIPTION
+		"A table of configuration events on this router."
+	::= { jnxCmCfgChg 7 }
+
+jnxCmCfgChgEventEntry OBJECT-TYPE
+	SYNTAX     JnxCmCfgChgEventEntry
+	MAX-ACCESS not-accessible
+	STATUS     current
+	DESCRIPTION
+		"Information about a configuration event on this router."
+	INDEX	{ jnxCmCfgChgEventIndex }
+	::= { jnxCmCfgChgEventTable 1 }
+
+JnxCmCfgChgEventEntry ::=
+    SEQUENCE {
+	jnxCmCfgChgEventIndex
+		Integer32,
+	jnxCmCfgChgEventTime
+		TimeTicks,
+	jnxCmCfgChgEventDate
+		DateAndTime,
+	jnxCmCfgChgEventSource
+		JnxCmCfChgSource,
+	jnxCmCfgChgEventUser
+		DisplayString,
+	jnxCmCfgChgEventLog
+		DisplayString
+    }
+
+jnxCmCfgChgEventIndex OBJECT-TYPE
+	SYNTAX     Integer32 (1..2147483647)
+	MAX-ACCESS not-accessible
+	STATUS     current
+	DESCRIPTION
+		"This object identifies a specific configuration change
+                event.  Monotonically increasing values will be assigned
+                by the snmp subsystem to each event as it occurs.  If the
+                snmp subsystem is reset, these index values will be reset
+                as well."
+	::= { jnxCmCfgChgEventEntry 1 }
+
+jnxCmCfgChgEventTime OBJECT-TYPE
+	SYNTAX     TimeTicks
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The value of sysUpTime when the event occurred."
+	::= { jnxCmCfgChgEventEntry 2 }
+
+jnxCmCfgChgEventDate OBJECT-TYPE
+	SYNTAX     DateAndTime
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The system date and time when the event occurred."
+	::= { jnxCmCfgChgEventEntry 3 }
+
+jnxCmCfgChgEventSource OBJECT-TYPE
+	SYNTAX     JnxCmCfChgSource 
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The source of the configuration event."
+	::= { jnxCmCfgChgEventEntry 4 }
+
+jnxCmCfgChgEventUser OBJECT-TYPE
+	SYNTAX     DisplayString
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+		"The name of the logged in user.  The length is zero if
+		not available or not applicable."
+	::= { jnxCmCfgChgEventEntry 5 }
+
+jnxCmCfgChgEventLog OBJECT-TYPE
+        SYNTAX     DisplayString
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The log of the configuration event.  The length is zero
+                if not available."
+        ::= { jnxCmCfgChgEventEntry 6 }
+
+--
+-- Configuration Rescue Change Management
+--
+
+jnxCmRescueChg OBJECT IDENTIFIER ::= { jnxCfgMgmt 2 }
+
+jnxCmRescueChgTime OBJECT-TYPE
+        SYNTAX     TimeTicks
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The value of sysUpTime when the rescue configuration was
+                last changed.
+
+                If the management subsystem was reset after the last
+                configuration change, this object will return 0."
+        ::= { jnxCmRescueChg 1 }
+
+jnxCmRescueChgDate OBJECT-TYPE
+        SYNTAX     DateAndTime
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The date and time when the rescue configuration was last
+                changed."
+        ::= { jnxCmRescueChg 2 }
+
+jnxCmRescueChgSource OBJECT-TYPE
+        SYNTAX     JnxCmCfChgSource
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The source of the rescue configuration event."
+        ::= { jnxCmRescueChg 3 }
+
+jnxCmRescueChgUser OBJECT-TYPE
+        SYNTAX     DisplayString
+        MAX-ACCESS read-only 
+        STATUS     current
+        DESCRIPTION
+                "The name of the logged in user.  The length is zero if
+                not available or not applicable."
+        ::= { jnxCmRescueChg 4 }
+
+jnxCmRescueChgState OBJECT-TYPE
+        SYNTAX     JnxCmRescueCfgState
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The current state of the rescue configuration."
+        ::= { jnxCmRescueChg 5 }
+
+--
+-- Configuration Management Notifications
+--
+
+jnxCmNotificationsPrefix   OBJECT IDENTIFIER ::= { jnxCmNotifications 0 }
+
+jnxCmCfgChange NOTIFICATION-TYPE
+       OBJECTS { jnxCmCfgChgEventTime,
+                 jnxCmCfgChgEventDate, 
+                 jnxCmCfgChgEventSource,
+		 jnxCmCfgChgEventUser,
+		 jnxCmCfgChgEventLog }
+       STATUS  current
+       DESCRIPTION
+		"Notification of a configuration management event as
+		recorded in jnxCmCfgChgEventTable."
+	::= { jnxCmNotificationsPrefix 1 }
+
+jnxCmRescueChange NOTIFICATION-TYPE
+       OBJECTS { jnxCmRescueChgTime,
+                 jnxCmRescueChgDate,
+                 jnxCmRescueChgSource,
+                 jnxCmRescueChgUser,
+                 jnxCmRescueChgState }
+       STATUS  current
+       DESCRIPTION
+                "Notification of the latest rescue configuration 
+                change."
+        ::= { jnxCmNotificationsPrefix 2 }
+
+END

mibs/juniper/JUNIPER-CHASSIS-CLUSTER-MIB

@@ -0,0 +1,380 @@
+-- *******************************************************************
+-- Juniper enterprise specific Chassis Cluster objects MIB.
+--
+-- Copyright (c) 2008-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+    JUNIPER-CHASSIS-CLUSTER-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        Counter32, Counter64, IpAddress, Integer32,
+        NOTIFICATION-TYPE, MODULE-IDENTITY,
+        OBJECT-TYPE
+            FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION, DisplayString
+            FROM SNMPv2-TC
+
+        jnxJsChassisCluster
+            FROM JUNIPER-JS-SMI;
+
+
+    jnxJsChassisClusterMIB  MODULE-IDENTITY
+        LAST-UPDATED  "201908290000Z"
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "Chassis Clustering is concerned with ensuring minimal disruption to
+             data and control planes in case of a failover. If one of the chassis in
+             a cluster fails, the other chassis in the cluster takes over the function
+             of the failed chassis with minimal service interruption.
+             This module defines the objects pertaining to Chassis Cluster."
+
+        REVISION      "201908290000Z"
+        DESCRIPTION   "Added trap jnxJsChHAPeerBfdTrap"
+
+        REVISION      "201809180000Z"
+        DESCRIPTION   "Added trap jnxJsChClusterHealthTrap"
+
+        REVISION      "201309200000Z"
+        DESCRIPTION   "Added trap jnxJsChClusterWeightTrap"
+
+        REVISION      "201207200000Z"
+        DESCRIPTION   "Added trap jnxJsChClusterSpuMismatchTrap"
+
+        REVISION      "201106280000Z"
+        DESCRIPTION   "Added trap jnxJsChClusterIntfTrap"
+
+        REVISION      "200905270000Z"
+        DESCRIPTION   "Added trap class for jnxJsChassisClusterSwitchover"
+
+        REVISION      "200902030000Z"
+        DESCRIPTION   "Creation Date"
+    ::= { jnxJsChassisCluster 1 }
+
+
+    jnxJsChassisClusterNotifications OBJECT IDENTIFIER ::=
+                                     { jnxJsChassisClusterMIB 0 }
+    jnxJsChassisClusterTrapObjects   OBJECT IDENTIFIER ::=
+                                     { jnxJsChassisClusterMIB 1 }
+
+    -- ***************************************************************
+    -- definition of ChassisCluster related traps and objects.
+    -- ***************************************************************
+
+    jnxJsChassisClusterSwitchover NOTIFICATION-TYPE
+        OBJECTS { jnxJsChClusterSwitchoverInfoRedundancyGroup,
+                  jnxJsChClusterSwitchoverInfoClusterId,
+                  jnxJsChClusterSwitchoverInfoNodeId,
+                  jnxJsChClusterSwitchoverInfoPreviousState,
+                  jnxJsChClusterSwitchoverInfoCurrentState,
+                  jnxJsChClusterSwitchoverInfoReason }
+        STATUS              current
+        DESCRIPTION
+            "Notification to signal switchover/failover."
+        ::= { jnxJsChassisClusterNotifications 1 }
+    -- ***************************************************************
+    -- definition of a trap that notifies changes in fabric
+    -- and control link status.
+    -- ***************************************************************
+
+    jnxJsChClusterIntfTrap  NOTIFICATION-TYPE
+        OBJECTS { jnxJsChClusterSwitchoverInfoClusterId,
+                  jnxJsChClusterIntfName,
+                  jnxJsChClusterIntfState,
+                  jnxJsChClusterIntfSeverity,
+                  jnxJsChClusterIntfStateReason }
+        STATUS              current
+        DESCRIPTION
+            "Notification to signal node health status change (healthy/unhealthy)."
+        ::= { jnxJsChassisClusterNotifications 2 }
+
+    -- ***************************************************************
+    -- definition of a trap that notifies cluster having different
+    -- SPU number
+    -- ***************************************************************
+
+    jnxJsChClusterSpuMismatchTrap NOTIFICATION-TYPE
+        OBJECTS { jnxJsChClusterNodeZeroId,
+                  jnxJsChClusterNodeZeroSpuCount,
+                  jnxJsChClusterNodeOneId ,
+                  jnxJsChClusterNodeOneSpuCount }
+        STATUS              current
+        DESCRIPTION
+            "Notification to signal cluster having different SPU number."
+        ::= { jnxJsChassisClusterNotifications 3 }
+
+    -- ***************************************************************
+    -- definition of a trap that notifies changes in node weight
+    -- ***************************************************************
+
+    jnxJsChClusterWeightTrap NOTIFICATION-TYPE
+        OBJECTS { jnxJsChClusterClusterID,
+                  jnxJsChClusterRedundancyGroupID,
+                  jnxJsChClusterNodeID,
+                  jnxJsChClusterWeightHealthStatus,
+                  jnxJsChClusterWeightValue }
+        STATUS              current
+        DESCRIPTION
+            "Notification to signal node health status change (healthy/unhealthy)."
+        ::= { jnxJsChassisClusterNotifications 4 }
+
+    -- ***************************************************************
+    -- definition of a trap that notifies changes in HA health status
+    -- ***************************************************************
+
+    jnxJsChClusterHealthTrap NOTIFICATION-TYPE
+        OBJECTS { jnxJsChClusterHealthNodeID,
+                  jnxJsChClusterHealthSeverity,
+                  jnxJsChClusterHealthReason }
+        STATUS              current
+        DESCRIPTION
+            "Notification to signal cluster is in unhealth status."
+
+        ::= { jnxJsChassisClusterNotifications 5 }
+
+    -- ***************************************************************
+    -- definition of a trap that notifies changes in L3 HA peer status
+    -- ***************************************************************
+
+    jnxJsChHAPeerBfdTrap NOTIFICATION-TYPE
+        OBJECTS { jnxJsChHAPeerID,
+                  jnxJsChHAPeerBfdSeverity,
+                  jnxJsChHAPeerBfdReason }
+        STATUS              current
+        DESCRIPTION
+            "Notification to signal HA peer status change."
+
+        ::= { jnxJsChassisClusterNotifications 6 }
+
+    jnxJsChClusterSwitchoverInfoRedundancyGroup OBJECT-TYPE
+
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains identification of redundancy group
+             that switched over."
+        ::= { jnxJsChassisClusterTrapObjects 1 }
+
+    jnxJsChClusterSwitchoverInfoClusterId OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains cluster identification information
+             where the switchover occured."
+        ::= { jnxJsChassisClusterTrapObjects 2 }
+
+    jnxJsChClusterSwitchoverInfoNodeId OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains node identification information
+             where the switchover occured."
+        ::= { jnxJsChassisClusterTrapObjects 3 }
+
+    jnxJsChClusterSwitchoverInfoPreviousState OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains the redundancy state of the cluster
+             before the occurance of switchover."
+        ::= { jnxJsChassisClusterTrapObjects 4 }
+
+    jnxJsChClusterSwitchoverInfoCurrentState OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains the redundancy state of the cluster
+             after the occurance of switchover."
+        ::= { jnxJsChassisClusterTrapObjects 5 }
+
+    jnxJsChClusterSwitchoverInfoReason OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains the cause for switchover."
+        ::= { jnxJsChassisClusterTrapObjects 6 }
+
+    jnxJsChClusterIntfName OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains the name of the link
+             that changed its state."
+        ::= { jnxJsChassisClusterTrapObjects 7 }
+
+    jnxJsChClusterIntfState OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains the state of the link;
+             whether it is UP or DOWN."
+        ::= { jnxJsChassisClusterTrapObjects 8 }
+
+    jnxJsChClusterIntfSeverity OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object reflects the severity;
+             whether it is minor or major."
+        ::= { jnxJsChassisClusterTrapObjects 9 }
+
+    jnxJsChClusterIntfStateReason OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains the reason why the link state
+             changed."
+        ::= { jnxJsChassisClusterTrapObjects 10 }
+
+    jnxJsChClusterNodeZeroId OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains remote node identification information
+             where the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 11 }
+
+    jnxJsChClusterNodeOneId OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains remote node identification information
+             where the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 12 }
+
+    jnxJsChClusterNodeZeroSpuCount OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains local node total SPU number."
+        ::= { jnxJsChassisClusterTrapObjects 13 }
+
+    jnxJsChClusterNodeOneSpuCount OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains remote node total SPU number."
+        ::= { jnxJsChassisClusterTrapObjects 14 }
+
+    jnxJsChClusterClusterID OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains identification of cluster,
+             in which the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 15 }
+
+    jnxJsChClusterRedundancyGroupID OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains identification of RedundancyGroup,
+             in which the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 16 }
+
+    jnxJsChClusterNodeID OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains identification of node,
+             in which the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 17 }
+
+    jnxJsChClusterWeightHealthStatus OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains health status, whether is healthy
+             or unhealthy."
+        ::= { jnxJsChassisClusterTrapObjects 18 }
+
+    jnxJsChClusterWeightValue OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains weight value."
+        ::= { jnxJsChassisClusterTrapObjects 19 }
+
+    jnxJsChClusterHealthNodeID OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains identification of node,
+             in which the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 20 }
+
+    jnxJsChClusterHealthSeverity OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object reflects the severity;
+             whether it is minor or major."
+        ::= { jnxJsChassisClusterTrapObjects 21 }
+
+    jnxJsChClusterHealthReason OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains ha unhealth status reason."
+        ::= { jnxJsChassisClusterTrapObjects 22 }
+
+    jnxJsChHAPeerID OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains identification of peer,
+             in which the event occured."
+        ::= { jnxJsChassisClusterTrapObjects 23 }
+
+    jnxJsChHAPeerBfdSeverity OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object reflects the severity;
+             whether it is minor or major."
+        ::= { jnxJsChassisClusterTrapObjects 24 }
+
+    jnxJsChHAPeerBfdReason OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object contains HA peer BFD down reason."
+        ::= { jnxJsChassisClusterTrapObjects 25 }
+
+END

mibs/juniper/JUNIPER-CHASSIS-FWDD-MIB

@@ -0,0 +1,87 @@
+--
+-- Juniper Enterprise Specific MIB: J-Series FWDD (Forwarding Daemon) MIB
+-- 
+-- Copyright (c) 2006, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-CHASSIS-FWDD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32
+        FROM SNMPv2-SMI
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxFwdd MODULE-IDENTITY
+    LAST-UPDATED "200602162158Z" -- Thurs Feb 16 21:58:00 2006 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for J-Series FWDD module from the router chassis box."
+    ::= { jnxMibs 34 }
+
+
+--
+-- FWDD Process Info
+--
+
+jnxFwddProcess 	  OBJECT IDENTIFIER ::= { jnxFwdd 1 }
+
+
+	jnxFwddMicroKernelCPUUsage OBJECT-TYPE
+	SYNTAX		Gauge32
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The FWDD Micro Kernel CPU utilization in percentage.
+         Zero if unavailable or inapplicable."
+	::= { jnxFwddProcess 1 }
+
+	jnxFwddRtThreadsCPUUsage OBJECT-TYPE
+	SYNTAX		Gauge32
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The FWDD Realtime threads total CPU utilization in percentage.
+         Zero if unavailable or inapplicable."
+	::= { jnxFwddProcess 2 }
+
+	jnxFwddHeapUsage OBJECT-TYPE
+	SYNTAX		Gauge32
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The FWDD Heap utilization in percentage.
+         Zero if unavailable or inapplicable."
+	::= { jnxFwddProcess 3 }
+
+	jnxFwddDmaMemUsage OBJECT-TYPE
+	SYNTAX		Gauge32
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The FWDD DMA Memory utilization in percentage.
+         Zero if unavailable or inapplicable."
+	::= { jnxFwddProcess 4 }
+
+	jnxFwddUpTime OBJECT-TYPE
+	SYNTAX		Integer32
+	UNITS		"seconds"
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"The FWDD Module uptime expressed in seconds.
+         Zero if unavailable or inapplicable."
+	::= { jnxFwddProcess 5 }
+
+END

mibs/juniper/JUNIPER-COLLECTOR-MIB

@@ -0,0 +1,892 @@
+--
+-- Juniper Enterprise Specific MIB: Collector PIC MIB
+-- 
+-- Copyright (c) 2003, 2005-2006, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-COLLECTOR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter64, Gauge32, Integer32,
+    NOTIFICATION-TYPE, OBJECT-IDENTITY, TimeTicks
+        FROM SNMPv2-SMI
+    DateAndTime, TEXTUAL-CONVENTION, DisplayString
+        FROM SNMPv2-TC
+    ifIndex, ifDescr
+        FROM IF-MIB
+    InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB            -- RFC2851
+    CounterBasedGauge64
+        FROM HCNUM-TC
+    jnxMibs, jnxCollectorNotifications
+        FROM JUNIPER-SMI;
+
+jnxCollectorMIB  MODULE-IDENTITY
+    LAST-UPDATED "200311130000Z" -- Nov 13, 2003
+    ORGANIZATION "Juniper Networks, Inc." 
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "Provides data about each of the Collector PICs on a router."
+
+    -- revision history
+    REVISION  "200311130000Z"
+    DESCRIPTION
+            "Initial revision."
+    ::= { jnxMibs 28 }
+
+JnxCollPicStateDef ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Identifies specific error conditions that may exist on a
+             Collector PIC."
+    SYNTAX   BITS {
+                 jnxCollStateSoftOverload(0),    -- soft flow overload
+                 jnxCollStateHardOverload(1),    -- hard flow overload
+                 jnxCollStateMemoryUnavail(2)    -- unavailable memory
+             }
+
+--
+-- Global Stats
+--
+
+    jnxCollGlobalStats OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Global, router-wide collector stats."
+        ::= { jnxCollectorMIB 1 }
+
+
+    jnxCollGlobalCreatedFiles OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of file created by all the
+            collector pics on the router since the last 
+            time the router was reset."
+        ::= { jnxCollGlobalStats 1 }
+
+    jnxCollGlobalOpenFiles OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of open collector files currently
+            present on the router."
+        ::= { jnxCollGlobalStats 2 }
+
+--
+-- Per-Collector PIC data
+--
+
+    jnxCollPicIfTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF JnxCollPicEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Data about each collector pic currently present
+            on the router." 
+        ::= { jnxCollectorMIB 2 }
+
+    jnxCollPicIfEntry OBJECT-TYPE
+        SYNTAX     JnxCollPicEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry provides information about a single Collector PIC.
+            Each Collector PIC contains a single interface and is 
+            identified by its ifIndex."
+        INDEX   { ifIndex }
+        ::= { jnxCollPicIfTable 1 }
+
+    JnxCollPicEntry ::=
+        SEQUENCE {
+
+            --
+            -- File statistics
+            --
+            jnxCollPicIfCreatedFiles          Counter64,
+            jnxCollPicIfCreatedFileRate       Gauge32,
+            jnxCollPicIfPeakCreatedFileRate   Gauge32,
+            jnxCollPicIfExportedFiles         Counter64,
+            jnxCollPicIfExportedFileRate      Gauge32,
+            jnxCollPicIfPeakExportedFileRate  Gauge32,
+            jnxCollPicIfDestroyedFiles        Counter64,
+            jnxCollPicIfDestroyedFileRate     Gauge32,
+            jnxCollPicIfPeakDestroyedFileRate Gauge32,
+
+            --
+            -- Record statistics
+            --
+            jnxCollPicIfProcRecords         Counter64,
+            jnxCollPicIfProcRecordsRate     Gauge32,
+            jnxCollPicIfPeakProcRecordsRate Gauge32,
+
+            --
+            -- Memory statistics
+            --
+            jnxCollPicIfMemoryUsed          CounterBasedGauge64,
+            jnxCollPicIfMemoryFree          CounterBasedGauge64,
+
+            --
+            -- Ftp statistics
+            --
+            jnxCollPicIfFtpBytes            Counter64,
+            jnxCollPicIfFtpByteRate         Gauge32,
+            jnxCollPicIfPeakFtpByteRate     Gauge32,
+            jnxCollPicIfFtpFiles            Counter64,
+            jnxCollPicIfFtpFileRate         Gauge32,
+            jnxCollPicIfPeakFtpFileRate     Gauge32,
+            jnxCollPicIfFtpFailures         CounterBasedGauge64,
+
+            --
+            -- Error state information
+            --
+            jnxCollPicIfCurrentState        JnxCollPicStateDef,
+            jnxCollPicIfLastStateChange     JnxCollPicStateDef,
+            jnxCollPicIfStateChangeTime     TimeTicks,
+            jnxCollPicIfStateChangeDate     DateAndTime,
+            jnxCollPicIfStateChangeType     INTEGER
+        }
+
+    --
+    -- File statistics
+    --
+    jnxCollPicIfCreatedFiles OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of files created by this Collector PIC
+            since the last time the PIC was reset."
+        ::= { jnxCollPicIfEntry 1 }
+
+    jnxCollPicIfCreatedFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of files created per second, measured over the
+            current 10 second interval."
+        ::= { jnxCollPicIfEntry 2 }
+
+    jnxCollPicIfPeakCreatedFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of files created per second."
+        ::= { jnxCollPicIfEntry 3 }
+
+    jnxCollPicIfExportedFiles OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of files exported by this Collector PIC."
+        ::= { jnxCollPicIfEntry 4 }
+
+    jnxCollPicIfExportedFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of files exported per second, measured over
+            the current 10 second interval."
+        ::= { jnxCollPicIfEntry 5 }
+
+    jnxCollPicIfPeakExportedFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of files exported per second."
+        ::= { jnxCollPicIfEntry 6 }
+
+    jnxCollPicIfDestroyedFiles OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of files destroyed by this Collector PIC."
+        ::= { jnxCollPicIfEntry 7 }
+
+    jnxCollPicIfDestroyedFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of files destroyed per second, as measured over
+            the current 10 second interval."
+        ::= { jnxCollPicIfEntry 8 }
+
+    jnxCollPicIfPeakDestroyedFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of files destroyed per second."
+        ::= { jnxCollPicIfEntry 9 }
+
+    --
+    -- Record statistics
+    --
+    jnxCollPicIfProcRecords OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of flow records processed by this Collector PIC."
+        ::= { jnxCollPicIfEntry 10 }
+
+    jnxCollPicIfProcRecordsRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of flow records processed per seconds, measured
+            during the current 10 second interval."
+        ::= { jnxCollPicIfEntry 11 }
+
+    jnxCollPicIfPeakProcRecordsRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of flow records processed."
+        ::= { jnxCollPicIfEntry 12 }
+
+    --
+    -- Memory statistics
+    --
+    jnxCollPicIfMemoryUsed OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The amount of memory used, in bytes, by this Collector PIC."
+        ::= { jnxCollPicIfEntry 13 }
+
+    jnxCollPicIfMemoryFree OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The amount of memory free, in bytes, on this Collector PIC."
+        ::= { jnxCollPicIfEntry 14 }
+
+    --
+    -- Ftp statistics
+    --
+    jnxCollPicIfFtpBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of bytes transferred via FTP by this 
+            Collector PIC."
+        ::= { jnxCollPicIfEntry 15 }
+
+    jnxCollPicIfFtpByteRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes per second transfered via FTP measured
+            during the current 10 second interval."
+        ::= { jnxCollPicIfEntry 16 }
+
+    jnxCollPicIfPeakFtpByteRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of bytes per second transferred via FTP."
+        ::= { jnxCollPicIfEntry 17 }
+
+    jnxCollPicIfFtpFiles OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of files transferred via FTP by this
+            Collector PIC."
+        ::= { jnxCollPicIfEntry 18 }
+
+    jnxCollPicIfFtpFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of files per second transferred via FTP."
+        ::= { jnxCollPicIfEntry 19 }
+
+    jnxCollPicIfPeakFtpFileRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of files per second transferred via FTP."
+        ::= { jnxCollPicIfEntry 20 }
+
+    jnxCollPicIfFtpFailures OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of FTP transfer failures on this Collector
+            PIC."
+        ::= { jnxCollPicIfEntry 21 }
+
+    --
+    -- Error State Information
+    --
+    jnxCollPicIfCurrentState OBJECT-TYPE
+        SYNTAX      JnxCollPicStateDef
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current state of various error conditions on this
+            Collector PIC."
+        ::= { jnxCollPicIfEntry 22 }
+
+    jnxCollPicIfLastStateChange OBJECT-TYPE
+        SYNTAX      JnxCollPicStateDef
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Identifies the error condition that last changed state."
+        ::= { jnxCollPicIfEntry 23 }
+
+    jnxCollPicIfStateChangeTime OBJECT-TYPE
+        SYNTAX      TimeTicks
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the management subsystem last
+            learned of a change to the value of jnxCollPicIfCurrentState
+            for this Collector PIC."
+        ::= { jnxCollPicIfEntry 24 }
+
+    jnxCollPicIfStateChangeDate OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The system date and time when the management subsystem last
+            learned of a change to the value of jnxCollPicIfCurrentState
+            for this Collector PIC."
+        ::= { jnxCollPicIfEntry 25 }
+
+    jnxCollPicIfStateChangeType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        none    (1),
+                        set     (2),
+                        cleared (3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This indicates whether the last state change set a new
+            error condition or cleared an existing one."
+        ::= { jnxCollPicIfEntry 26 }
+
+
+
+
+--
+-- Per Collector file data
+--
+
+    jnxCollFileTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF JnxCollFileEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Data about each collector file currently present
+            on the router." 
+        ::= { jnxCollectorMIB 3 }
+
+    jnxCollFileEntry OBJECT-TYPE
+        SYNTAX     JnxCollFileEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry provides information about a single file currently
+            open on this Collector PIC.  Each Collector PIC File is 
+            identified by the ifIndex associated with the Collector PIC 
+            and the name of the file."
+        INDEX   { ifIndex, jnxCollFileName }
+        ::= { jnxCollFileTable 1 }
+
+    JnxCollFileEntry ::=
+        SEQUENCE {
+            jnxCollFileName               DisplayString,
+            jnxCollFileFname              DisplayString,
+            jnxCollFileRecords            CounterBasedGauge64,
+            jnxCollFileRecordRate         Gauge32,
+            jnxCollFilePeakRecordRate     Gauge32,
+
+            jnxCollFileUncompBytes        CounterBasedGauge64,
+            jnxCollFileUncompByteRate     Gauge32,
+            jnxCollFilePeakUncompByteRate Gauge32,
+            jnxCollFileCompBytes          CounterBasedGauge64,
+            jnxCollFileCompByteRate       Gauge32,
+            jnxCollFilePeakCompByteRate   Gauge32,
+            jnxCollFileBlocks             Gauge32,
+            jnxCollFileCompBlocks         Gauge32,
+            jnxCollFileTransferAttempts   Gauge32,
+            jnxCollFileState              INTEGER
+        }
+
+    jnxCollFileName OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(1..115))
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The name of a Collector File on this Collector PIC."
+        ::= { jnxCollFileEntry 1 }
+
+    jnxCollFileFname OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The name of a Collector File on this Collector PIC.  This
+            object is included for those NM applications that can't
+            parse the file name from the instance portion of the OIDs
+            and provides the value of jnxCollFileName explicitly."
+        ::= { jnxCollFileEntry 2 }
+
+    jnxCollFileRecords OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of flow records in this file."
+        ::= { jnxCollFileEntry 3 }
+
+    jnxCollFileRecordRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of flow records per second added to this file,
+            measured during the current 10 second interval."
+        ::= { jnxCollFileEntry 4 }
+
+    jnxCollFilePeakRecordRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of flow records per second added to this file."
+        ::= { jnxCollFileEntry 5 }
+
+    jnxCollFileUncompBytes OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of uncompressed bytes in this file."
+        ::= { jnxCollFileEntry 6 }
+
+    jnxCollFileUncompByteRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of uncompressed bytes per second added to this file."
+        ::= { jnxCollFileEntry 7 }
+
+    jnxCollFilePeakUncompByteRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of uncompressed bytes per second added to this 
+            file."
+        ::= { jnxCollFileEntry 8 }
+
+    jnxCollFileCompBytes OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of compressed bytes in this file."
+        ::= { jnxCollFileEntry 9 }
+
+    jnxCollFileCompByteRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of compressed bytes per second added to this file,
+            measured during the current 10 second interval."
+        ::= { jnxCollFileEntry 10 }
+
+    jnxCollFilePeakCompByteRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The peak number of compressed bytes per second added to this file."
+        ::= { jnxCollFileEntry 11 }
+
+    jnxCollFileBlocks OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of blocks in this file."
+        ::= { jnxCollFileEntry 12 }
+
+    jnxCollFileCompBlocks OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of compressed blocks in this file."
+        ::= { jnxCollFileEntry 14 }
+
+    jnxCollFileTransferAttempts OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of FTP transfer attempts for this file."
+        ::= { jnxCollFileEntry 15 }
+
+    jnxCollFileState OBJECT-TYPE
+        SYNTAX      INTEGER {
+            unknown(1),
+            active (2), -- file is actively receiving flow records
+            wait   (3), -- file is waiting for export
+            export1(4), -- file is being exported to the primary server
+            export2(5)  -- file is being exported to the secondary server
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current state of this file."
+        ::= { jnxCollFileEntry 16 }
+
+
+--
+-- Collector PIC Notification objects
+--
+
+    jnxCollNotifyVars OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Notification object definitions."
+        ::= { jnxCollectorMIB 4 }
+
+    jnxCollNotifyUrl OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The URL associated with a file transfer destination."
+        ::= { jnxCollNotifyVars 1 }
+
+    jnxCollNotifyInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Used with jnxCollNotifyInetAddress to identify a specific
+            file transfer destination."
+        ::= { jnxCollNotifyVars 2 }
+ 
+    jnxCollNotifyInetAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Used with jnxCollNotifyInetType to identify a specific
+            file transfer destination."
+        ::= { jnxCollNotifyVars 3 }
+ 
+    jnxCollNotifyError OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Description of error encountered when trying to transfer a file."
+        ::= { jnxCollNotifyVars 4 }
+
+    jnxCollNotifyFile OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Identifies a specific file for notifications that refer to a file."
+        ::= { jnxCollNotifyVars 5 }
+ 
+    jnxCollNotifyFtpResultCode OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the FTP result code for file transfer notifications."
+        ::= { jnxCollNotifyVars 6 }
+ 
+    jnxCollNotifyFtpErrorText OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the FTP error text for file transfer notifications."
+        ::= { jnxCollNotifyVars 7 }
+
+    jnxCollNotifyMemUtil OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the current memory utilization for pic overload 
+            notifications."
+        ::= { jnxCollNotifyVars 8 }
+ 
+    jnxCollNotifyMemFree OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the current amount of free memory for pic overload 
+            notifications."
+        ::= { jnxCollNotifyVars 9 }
+ 
+    jnxCollNotifyMemThresh OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the current memory threshold used for determining
+            memory unavailable conditions."
+        ::= { jnxCollNotifyVars 10 }
+
+    jnxCollNotifyNewRecordRate OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the current number of new records per second created
+            on this Collector PIC."
+        ::= { jnxCollNotifyVars 11 }
+ 
+    jnxCollNotifyOverloadType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            softOverload (1),
+            hardOverload (2)
+        }
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Identifies a specific type of flow overload condition
+            on this Collector PIC."
+        ::= { jnxCollNotifyVars 12 }
+ 
+    jnxCollNotifyDate OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Provides the current system date and time."
+        ::= { jnxCollNotifyVars 13 }
+
+    jnxCollNotifyFromFtpServerInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Used with jnxCollNotifyFromFtpServerInetAddress to identify
+            a specific FTP server address."
+        ::= { jnxCollNotifyVars 14 }
+
+    jnxCollNotifyFromFtpServerInetAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The FTP server address from which the switchover occurs."
+        ::= { jnxCollNotifyVars 15 }
+
+    jnxCollNotifyFromFtpServerType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            primary (1),
+            secondary (2)
+        }
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The FTP server Type from which the switchover occurs."
+        ::= { jnxCollNotifyVars 16 }
+
+    jnxCollNotifyToFtpServerInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Used with jnxCollNotifyToFtpServerInetAddress to identify
+            a specific FTP server address."
+        ::= { jnxCollNotifyVars 17 }
+
+    jnxCollNotifyToFtpServerInetAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The FTP server address to which the switchover occurs."
+        ::= { jnxCollNotifyVars 18 }
+
+    jnxCollNotifyToFtpServerType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            primary (1),
+            secondary (2)
+        }
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The FTP server Type to which the switchover occurs."
+        ::= { jnxCollNotifyVars 19 }
+
+    jnxCollNotifyInitiatedBy OBJECT-TYPE
+        SYNTAX      INTEGER {
+            cli (1),
+            automatic (2)
+        }
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Identify what initiates the FTP switchover."
+        ::= { jnxCollNotifyVars 20 }
+
+ 
+--
+-- Collector PIC Notification definitions
+--
+
+    jnxCollNotificationPrefix OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "All collector notifications are registered under this branch."
+        ::= { jnxCollectorNotifications 0 }
+
+
+    jnxCollUnavailableDest NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollNotifyDate,
+                  jnxCollNotifyUrl, 
+                  jnxCollNotifyInetType,
+		  jnxCollNotifyInetAddress }
+        STATUS  current
+        DESCRIPTION
+            "Notification of an unavailable destination failure encountered
+            while transferring a collector file."
+        ::= { jnxCollNotificationPrefix 1 }
+
+    jnxCollUnavailableDestCleared NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollNotifyDate,
+                  jnxCollNotifyUrl, 
+                  jnxCollNotifyInetType,
+		  jnxCollNotifyInetAddress }
+        STATUS  current
+        DESCRIPTION
+            "This indicates a previous unavailable destination failure 
+            has been resolved."
+        ::= { jnxCollNotificationPrefix 2 }
+
+    jnxCollUnsuccessfulTransfer NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollNotifyDate,
+                  jnxCollNotifyFile,
+                  jnxCollNotifyUrl, 
+                  jnxCollNotifyInetType,
+		  jnxCollNotifyInetAddress,
+                  jnxCollNotifyError,
+                  jnxCollNotifyFtpResultCode,
+                  jnxCollNotifyFtpErrorText }
+        STATUS  current
+        DESCRIPTION
+            "This indicates an error was encountered while attempting
+            a file transfer."
+        ::= { jnxCollNotificationPrefix 3 }
+
+    jnxCollFlowOverload NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollPicIfStateChangeDate,
+                  jnxCollNotifyOverloadType,
+                  jnxCollNotifyNewRecordRate, 
+                  jnxCollPicIfCreatedFiles,
+                  jnxCollPicIfDestroyedFiles}
+        STATUS  current
+        DESCRIPTION
+            "This indicates a soft or hard flow overload condition has been
+            triggered."
+        ::= { jnxCollNotificationPrefix 4 }
+
+    jnxCollFlowOverloadCleared NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollPicIfStateChangeDate,
+                  jnxCollNotifyOverloadType,
+                  jnxCollNotifyNewRecordRate, 
+                  jnxCollPicIfCreatedFiles,
+                  jnxCollPicIfDestroyedFiles }
+        STATUS  current
+        DESCRIPTION
+            "This indicates a soft or hard flow overload condition has been
+            cleared."
+        ::= { jnxCollNotificationPrefix 5 }
+
+    jnxCollMemoryUnavailable NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollPicIfStateChangeDate,
+                  jnxCollNotifyMemThresh,
+                  jnxCollNotifyMemUtil, 
+                  jnxCollNotifyMemFree }
+        STATUS  current
+        DESCRIPTION
+            "This indicates a memory unavailable condition has been
+            triggered."
+        ::= { jnxCollNotificationPrefix 6 }
+
+    jnxCollMemoryAvailable NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxCollPicIfStateChangeDate,
+                  jnxCollNotifyMemThresh,
+                  jnxCollNotifyMemUtil, 
+                  jnxCollNotifyMemFree }
+        STATUS  current
+        DESCRIPTION
+            "This indicates a memory unavailable condition has been
+            cleared."
+        ::= { jnxCollNotificationPrefix 7 }
+
+    jnxCollFtpSwitchover NOTIFICATION-TYPE
+        OBJECTS { ifDescr, 
+                  jnxCollNotifyDate,
+                  jnxCollNotifyFromFtpServerInetType,
+                  jnxCollNotifyFromFtpServerInetAddress,
+                  jnxCollNotifyFromFtpServerType,
+                  jnxCollNotifyToFtpServerInetType,
+                  jnxCollNotifyToFtpServerInetAddress,
+                  jnxCollNotifyToFtpServerType,
+                  jnxCollNotifyInitiatedBy }
+        STATUS  current
+        DESCRIPTION
+            "This indicates an FTP server switchover has occurred." 
+        ::= { jnxCollNotificationPrefix 8 }
+
+END

mibs/juniper/JUNIPER-DCU-MIB

@@ -0,0 +1,210 @@
+--
+-- Juniper Enterprise Specific MIB: Destination Class Usage MIB
+-- 
+-- Copyright (c) 2000-2003, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-DCU-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter64
+        FROM SNMPv2-SMI
+    DisplayString
+        FROM SNMPv2-TC
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB      -- RFC 2571
+    InterfaceIndex
+        FROM IF-MIB
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxDCUs MODULE-IDENTITY
+    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:48 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for Destination Class Usage (DCU)"
+    REVISION "200212170000Z"    -- 17 December, 2002
+    DESCRIPTION
+            "Deprecated jnxDCUsTable.  Use jnxDcuStatsTable instead."
+    REVISION "200202280000Z"    -- 28 February, 2002
+    DESCRIPTION
+            "Added jnxDcuStatsTable to expose per-address family stats.
+            The current jnxDCUsTable will only apply to ipv4 stats."
+    ::= { jnxMibs 6 }
+
+
+
+    jnxDCUsTable    OBJECT-TYPE
+	SYNTAX      SEQUENCE OF JnxDCUsEntry
+	MAX-ACCESS  not-accessible
+	STATUS      deprecated
+	DESCRIPTION
+		"A list of DCUs entries."
+
+
+	::= { jnxDCUs 1 }
+
+    jnxDCUsEntry    OBJECT-TYPE
+	SYNTAX      JnxDCUsEntry
+	MAX-ACCESS  not-accessible
+	STATUS      deprecated
+	DESCRIPTION
+		"An entry of DCUs table."
+	INDEX	{ jnxDCUSrcIfIndex,
+		  jnxDCUDstClassName }
+	::= { jnxDCUsTable 1 }
+
+    JnxDCUsEntry ::=
+	SEQUENCE {
+	    jnxDCUSrcIfIndex		InterfaceIndex,
+	    jnxDCUDstClassName		DisplayString,
+	    jnxDCUPackets		Counter64,
+	    jnxDCUBytes			Counter64
+	}
+
+    jnxDCUSrcIfIndex OBJECT-TYPE
+	SYNTAX      InterfaceIndex
+	MAX-ACCESS  read-only
+	STATUS      deprecated
+	DESCRIPTION
+		"The source interface index.  This is the ifIndex
+		that the traffic is coming from and the statistics 
+		is counted for the specified DCU entry."
+	::= { jnxDCUsEntry 1 }
+
+    jnxDCUDstClassName OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..24))
+	MAX-ACCESS  read-only
+	STATUS      deprecated
+	DESCRIPTION
+		"The name of the destination class.  This is the name
+		of a valid configuration group defining a set of IP
+		addresses and/or prefixes."
+	::= { jnxDCUsEntry 2 }
+
+    jnxDCUPackets OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      deprecated
+	DESCRIPTION
+		"The number of packets being counted pertaining to
+		the specified DCU entry."
+	::= { jnxDCUsEntry 3 }
+
+    jnxDCUBytes OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      deprecated
+	DESCRIPTION
+		"The number of bytes being counted pertaining to
+		the specified DCU entry."
+	::= { jnxDCUsEntry 4 }
+
+
+
+
+    jnxDcuStatsTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF JnxDcuStatsEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+                "This table contains statistics for traffic that satisfies
+                the rules in each configured Destination Class.  A separate
+                set of statistics are kept for each Destination Class on
+                each interface and address family on which this feature is 
+                enabled."
+        ::= { jnxDCUs 2 }
+
+    jnxDcuStatsEntry    OBJECT-TYPE
+        SYNTAX      JnxDcuStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry in this table contains a set of statistics for
+                all traffic received on a specific interface and belonging
+                to a specific address family that matches a specific
+                Destination Class."
+        INDEX   { jnxDcuStatsSrcIfIndex, jnxDcuStatsAddrFamily, 
+                  jnxDcuStatsClassName }
+        ::= { jnxDcuStatsTable 1 }
+
+    JnxDcuStatsEntry ::=
+        SEQUENCE {
+            jnxDcuStatsSrcIfIndex       InterfaceIndex,
+            jnxDcuStatsAddrFamily       INTEGER,
+            jnxDcuStatsClassName        SnmpAdminString,
+            jnxDcuStatsPackets          Counter64,
+            jnxDcuStatsBytes            Counter64,
+            jnxDcuStatsClName           SnmpAdminString
+        }
+
+    jnxDcuStatsSrcIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The ifIndex of the ingress interface for traffic counted in 
+                this entry."
+        ::= { jnxDcuStatsEntry 1 }
+
+    jnxDcuStatsAddrFamily OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        ipv4 (1),
+                        ipv6 (2)
+        }
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The address family of this entry's traffic."
+        ::= { jnxDcuStatsEntry 2 }
+
+    jnxDcuStatsClassName OBJECT-TYPE
+        SYNTAX      SnmpAdminString (SIZE(0..112))
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The name of the destination class."
+        ::= { jnxDcuStatsEntry 3 }
+
+    jnxDcuStatsPackets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of packets received on this interface, belonging
+                to this address family that match this Destination Class."
+        ::= { jnxDcuStatsEntry 4 }
+
+    jnxDcuStatsBytes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of bytes received on this interface, belonging
+                to this address family that match this Destination Class."
+        ::= { jnxDcuStatsEntry 5 }
+
+    jnxDcuStatsClName OBJECT-TYPE
+        SYNTAX      SnmpAdminString (SIZE(0..112))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The name of the destination class.  This object is a duplicate
+                of jnxDcuStatsClassName and is included to satisfy those 
+                NM applications that can't extract the name from the instance 
+                portion of the OID."
+        ::= { jnxDcuStatsEntry 6 }
+
+
+END

mibs/juniper/JUNIPER-DFC-MIB

@@ -0,0 +1,840 @@
+JUNIPER-DFC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, 
+    NOTIFICATION-TYPE, Unsigned32, Counter64
+        FROM SNMPv2-SMI
+    DisplayString
+        FROM SNMPv2-TC
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB      -- RFC 2571
+    InterfaceIndex
+        FROM IF-MIB
+    jnxMibs, jnxDfcNotifications
+        FROM JUNIPER-SMI;
+
+jnxDfc MODULE-IDENTITY
+    LAST-UPDATED "200507082153Z" -- Fri Jul 08 21:53:48 2005 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "    Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for Dynamic Flow Capture (DFC)"
+    ::= { jnxMibs 33 }
+
+
+
+    jnxDfcCSTable    OBJECT-TYPE
+      SYNTAX      SEQUENCE OF JnxDfcCSEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current 
+      DESCRIPTION
+            "Statistics information for Control Source."
+      ::= { jnxDfc 1 }
+
+    jnxDfcCSEntry    OBJECT-TYPE
+      SYNTAX      JnxDfcCSEntry 
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "An entry of DFC Control Source table."
+      INDEX	{ jnxDfcGrpName,
+                  jnxDfcCSId }
+      ::= { jnxDfcCSTable 1 }
+
+    JnxDfcCSEntry ::=
+	SEQUENCE {
+          jnxDfcGrpName                          DisplayString,
+          jnxDfcCSId                             DisplayString,
+          jnxDfcCSControlProtocolAddRequests     Counter64,
+          jnxDfcCSCriteriaAdded                  Counter64,
+          jnxDfcCSCriteriaAdditionFailed         Counter64,
+          jnxDfcCSControlProtocolDeleteRequests  Counter64,
+          jnxDfcCSCriteriaDeleted                Counter64,
+          jnxDfcCSCriteriaDeletionFailed         Counter64,
+          jnxDfcCSCriteriaDeletedTimeoutIdle     Counter64,
+          jnxDfcCSCriteriaDeletedTimeoutTotal    Counter64,
+          jnxDfcCSCriteriaDeletedPackets         Counter64,
+          jnxDfcCSCriteriaDeletedBytes           Counter64,
+          jnxDfcCSControlProtocolRefreshRequests Counter64,
+          jnxDfcCSCriteriaRefreshed              Counter64,
+          jnxDfcCSCriteriaRefreshFailed          Counter64,
+          jnxDfcCSControlProtocolListRequests    Counter64,
+          jnxDfcCSListSuccess                    Counter64,
+          jnxDfcCSListFailed                     Counter64,
+          jnxDfcCSControlProtocolNoopRequests    Counter64,
+          jnxDfcCSNoopSuccess                    Counter64,
+          jnxDfcCSNoopFailed                     Counter64,
+          jnxDfcCSDynamicCriteriaActive          Counter64,
+          jnxDfcCSStaticCriteriaActive           Counter64,
+          jnxDfcCSBadRequest                     Counter64,
+          jnxDfcCSResponseSuccessful             Counter64,
+          jnxDfcCSResponseImproperCriteria       Counter64,
+          jnxDfcCSResponseUnknownContentDest     Counter64,
+          jnxDfcCSResponseUnknownCriteriaId      Counter64,
+          jnxDfcCSResponseImproperTimeout        Counter64,
+          jnxDfcCSResponseInvalidAuthentication  Counter64,
+          jnxDfcCSResponseInvalidSequenceNumber  Counter64,
+          jnxDfcCSResponseInternalError          Counter64,
+          jnxDfcCSNotificationRestart            Counter64,
+          jnxDfcCSNotificationRollover           Counter64,
+          jnxDfcCSNotificationNoop               Counter64,
+          jnxDfcCSNotificationTimeout            Counter64,
+          jnxDfcCSNotificationCongestion         Counter64,
+          jnxDfcCSNotificationCongestionDelete   Counter64,
+          jnxDfcCSNotificationDuplicatesDropped  Counter64,
+          jnxDfcCSAddRequestRate                 Counter64,
+          jnxDfcCSAddRequestPeakRate             Counter64,
+          jnxDfcCSAggrCriteriaBandwidth          Counter64,
+          jnxDfcCSSequenceNumber                 Counter64
+      }
+
+    jnxDfcGrpName OBJECT-TYPE
+      SYNTAX      DisplayString (SIZE(0..64))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "The name assigned to a DFC group. A DFC group defines a set of DFC
+             PICs that share same static/dynamic 
+             configuration."
+      ::= { jnxDfcCSEntry 1 }
+
+    jnxDfcCSId OBJECT-TYPE
+      SYNTAX      DisplayString (SIZE(0..48))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "Control Source identifier. Control Source identifies Juniper router
+             with one unique Control IP address. There can be multiple IP 
+             addresses from which a Control Source can send Control protocol 
+             request to Juniper router."
+      ::= { jnxDfcCSEntry 2 }
+
+    jnxDfcCSControlProtocolAddRequests OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Control protocol Add requests received. The add 
+             request specifies a new filter criteria to be merged with the
+             existing tasking list for a given Control Source and Content 
+             Destination."
+      ::= { jnxDfcCSEntry 3 }
+
+    jnxDfcCSCriteriaAdded OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria added successfully by the Control
+             Source."
+      ::= { jnxDfcCSEntry 4 }
+
+    jnxDfcCSCriteriaAdditionFailed OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria addition failed."		
+      ::= { jnxDfcCSEntry 5 }
+
+    jnxDfcCSControlProtocolDeleteRequests OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Control protocol delete requests received. The 
+             delete request removes a particular filter criterion." 
+      ::= { jnxDfcCSEntry 6 }
+
+    jnxDfcCSCriteriaDeleted OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria deleted successfully as requested 
+             by Control Source."
+      ::= { jnxDfcCSEntry 7 }
+
+    jnxDfcCSCriteriaDeletionFailed OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria deletion failed."		
+      ::= { jnxDfcCSEntry 8 }
+
+    jnxDfcCSCriteriaDeletedTimeoutIdle OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of criteria deleted by timeout idle."
+      ::= { jnxDfcCSEntry 9 }
+
+    jnxDfcCSCriteriaDeletedTimeoutTotal OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of criteria deleted by timeout total."
+      ::= { jnxDfcCSEntry 10 }
+
+    jnxDfcCSCriteriaDeletedPackets OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of criteria deleted by packets."
+      ::= { jnxDfcCSEntry 11 }
+
+    jnxDfcCSCriteriaDeletedBytes OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of criteria deleted by bytes."
+      ::= { jnxDfcCSEntry 12 }
+
+    jnxDfcCSControlProtocolRefreshRequests OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Control protocol Refresh requests received. The 
+             refresh request updates the timeout for a particular filter
+             criterion or set of filter criteria for the particular Control
+             Source to a particular Content Destination."
+      ::= { jnxDfcCSEntry 13 }
+
+    jnxDfcCSCriteriaRefreshed OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria refreshed successfully as requested
+             by Control Source."
+      ::= { jnxDfcCSEntry 14 }
+
+    jnxDfcCSCriteriaRefreshFailed OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria refresh request failed."		
+      ::= { jnxDfcCSEntry 15 }
+
+    jnxDfcCSControlProtocolListRequests OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Control protocol List requests received. The List 
+             request returns a list of all criteria that a particular Control 
+             Source has added and are currently active."
+      ::= { jnxDfcCSEntry 16 }
+
+    jnxDfcCSListSuccess OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of list commands processed successfully as requested 
+             by Control Source."
+      ::= { jnxDfcCSEntry 17 }
+
+    jnxDfcCSListFailed OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of list commands that could not be processed 
+             successfully."		
+      ::= { jnxDfcCSEntry 18 }
+
+    jnxDfcCSControlProtocolNoopRequests OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Control protocol Noop requests received. The purpose
+             of this request is to verify the end-to-end connectivity between 
+             Control Source and DFC PIC."
+      ::= { jnxDfcCSEntry 19 }
+
+    jnxDfcCSNoopSuccess OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Noop requests processed successfully as requested by
+             Control Source."
+      ::= { jnxDfcCSEntry 20 }
+
+    jnxDfcCSNoopFailed OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Noop requests that could not be processed 
+             successfully."		
+      ::= { jnxDfcCSEntry 21 }
+
+    jnxDfcCSDynamicCriteriaActive OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of active dynamic filter criteria."		
+      ::= { jnxDfcCSEntry 22 }
+
+    jnxDfcCSStaticCriteriaActive OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of active static filter criteria."		
+      ::= { jnxDfcCSEntry 23 }
+
+    jnxDfcCSBadRequest OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Bad requests received."
+      ::= { jnxDfcCSEntry 24 }
+
+    jnxDfcCSResponseSuccessful OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of successful response(s) corresponding to the 
+             requests (add, delete, refresh, list and noop) sent out to the 
+             Control Source."
+      ::= { jnxDfcCSEntry 25 }
+
+    jnxDfcCSResponseImproperCriteria OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of improper filter 
+             criterion specification in the add request."
+      ::= { jnxDfcCSEntry 26 }
+
+    jnxDfcCSResponseUnknownContentDest OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of unknown Content 
+             Destination specified in the add, delete, refresh and list 
+             request."
+      ::= { jnxDfcCSEntry 27 }
+
+    jnxDfcCSResponseUnknownCriteriaId OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of unknown Criteria 
+             Identifier specified in the delete, refresh and list request."
+      ::= { jnxDfcCSEntry 28 }
+
+    jnxDfcCSResponseImproperTimeout OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of improper timeout 
+             specified in the add and refresh request."
+      ::= { jnxDfcCSEntry 29 }
+
+    jnxDfcCSResponseInvalidAuthentication OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of invalid 
+             authentication specified in the add, delete, refresh, list and 
+             noop request."
+      ::= { jnxDfcCSEntry 30 }
+
+    jnxDfcCSResponseInvalidSequenceNumber OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of invalid Sequence 
+             Number specified in the add, delete, refresh, list and noop 
+             request."
+      ::= { jnxDfcCSEntry 31 }
+
+    jnxDfcCSResponseInternalError OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of response(s) generated because of internal error at
+             the DFC PIC in processing a request."
+      ::= { jnxDfcCSEntry 32 }
+
+    jnxDfcCSNotificationRestart OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Restart notifications sent to configured 
+             notification-recipients. This notification will be generated when
+             the system experiences a failure such that all the DFC filter 
+             criteria are lost."
+      ::= { jnxDfcCSEntry 33 }
+
+    jnxDfcCSNotificationRollover OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Rollover notifications sent to configured 
+             notification-recipients. This notification will be generated when 
+             the DFC PIC experiences a sequence number rollover."
+      ::= { jnxDfcCSEntry 34 }
+
+    jnxDfcCSNotificationNoop OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Noop notifications sent to configured 
+             notification-recipents. This notification will be generated when
+             the DFC PIC receives a Noop message with the SendAsync parameter
+             present."
+      ::= { jnxDfcCSEntry 35 }
+
+    jnxDfcCSNotificationTimeout OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Timeout notifications sent to configured 
+             notification-recipents. This notification will be generated when 
+             the DFC PIC times out a filter criterion on any one of its 
+             configured timeout parameters and the criterion contains a 
+             SendTimeoutAsync parameter."
+      ::= { jnxDfcCSEntry 36 }
+
+    jnxDfcCSNotificationCongestion OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Congestion notifications sent to configured 
+             notification-recipents. This notification will be generated when 
+             the 10-second average packet forwarding rate (in bits/second)
+             summed over all active filter criteria to a configured Content 
+             Destination exceeds the configured soft limit for that destination."
+      ::= { jnxDfcCSEntry 37 }
+
+    jnxDfcCSNotificationCongestionDelete OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Congestion Delete notifications sent to configured 
+             notification-recipents. This notification will be generated when 
+             the total 10-second average packet forwarding rate (in bits/second)
+             summed over all active filter criteria to a configured Content 
+             Destination exceeds the configured hard limit for that 
+             destination."
+      ::= { jnxDfcCSEntry 38 }
+
+    jnxDfcCSNotificationDuplicatesDropped OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Duplicates Dropped notifications sent to configured
+             notification-recipents. This notification will be generated when 
+             the configurable Maximum Duplicates parameter has been exceeded in
+             such a way as to cause packets matching criteria added by the 
+             corresponding Control Source to be dropped."
+      ::= { jnxDfcCSEntry 39 }
+
+    jnxDfcCSAddRequestRate OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "The request processing rate (requests processed/second)."		
+      ::= { jnxDfcCSEntry 40 }
+
+    jnxDfcCSAddRequestPeakRate OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "The peak request processing rate (requests processed/second)."	
+      ::= { jnxDfcCSEntry 41 }
+
+    jnxDfcCSAggrCriteriaBandwidth OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Bandwidth in bits/second."	
+      ::= { jnxDfcCSEntry 42 }
+
+    jnxDfcCSSequenceNumber OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Protocol sequence number."
+      ::= { jnxDfcCSEntry 43 }
+
+
+
+------------------------------------------------------------
+
+    jnxDfcCDTable    OBJECT-TYPE
+      SYNTAX      SEQUENCE OF JnxDfcCDEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current 
+      DESCRIPTION
+            "Statistics information for content destination."
+      ::= { jnxDfc 2 }
+
+    jnxDfcCDEntry    OBJECT-TYPE
+      SYNTAX      JnxDfcCDEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "An entry of DFC Content-Destination table."
+      INDEX	{ jnxDfcGrpName,
+              jnxDfcCDId }
+      ::= { jnxDfcCDTable 1 }
+
+    JnxDfcCDEntry ::=
+	SEQUENCE {
+          jnxDfcCDId                         DisplayString,
+          jnxDfcCDCriteria                   Counter64,
+          jnxDfcCDByteRate                   Counter64,
+          jnxDfcCDMatchedPackets             Counter64,
+          jnxDfcCDMatchedBytes               Counter64,
+          jnxDfcCDCongestionNotification     Counter64
+      }
+
+    jnxDfcCDId OBJECT-TYPE
+      SYNTAX      DisplayString (SIZE(0..48))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "Content Destination identifier. A Content Destination is the 
+             recipient of the extracted data, once it is forwarded by the 
+             Server."
+      ::= { jnxDfcCDEntry 1 }
+
+    jnxDfcCDCriteria OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of filter criteria configured for the Content 
+             Destination."
+      ::= { jnxDfcCDEntry 2 }
+
+    jnxDfcCDByteRate OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Average data rate (in bytes/second) summed over all active
+             filter criteria to a configured Content Destination."		
+      ::= { jnxDfcCDEntry 3 }
+
+    jnxDfcCDMatchedPackets OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of packets matching the filter criteria configured for 
+             the Content Destination."		
+      ::= { jnxDfcCDEntry 4 }
+
+    jnxDfcCDMatchedBytes OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of bytes matching the filter criteria configured for 
+             the Content Destination."		
+      ::= { jnxDfcCDEntry 5 }
+
+    jnxDfcCDCongestionNotification OBJECT-TYPE
+      SYNTAX      Counter64
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "Total number of Congestion Notifications sent to a configured 
+             notification-recipient."		
+      ::= { jnxDfcCDEntry 6 }
+
+
+--
+-- DFC PIC Notification objects
+--
+
+    jnxDfcNotifyVars OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Notification object definitions."
+        ::= { jnxDfc 3 }
+
+    jnxDfcInterfaceName OBJECT-TYPE
+        SYNTAX      DisplayString 
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The textual name of the DFC interface." 
+        ::= { jnxDfcNotifyVars 1 }
+
+    jnxDfcInputPktRate OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "data packet rate (in packets per second)."
+        ::= { jnxDfcNotifyVars 2 }
+
+    jnxDfcPpsSoftOverloadLowWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Configured lowest value for data packet rate (in packets 
+             per second)." 
+        ::= { jnxDfcNotifyVars 3 }
+
+    jnxDfcPpsSoftOverloadHighWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Configured highest value for data packet rate (in packets 
+             per second)." 
+        ::= { jnxDfcNotifyVars 4 }
+
+    jnxDfcPpsHardOverloadLowWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Recommended lowest value for data packet rate (in packets 
+             per second)." 
+        ::= { jnxDfcNotifyVars 5 }
+
+    jnxDfcPpsHardOverloadHighWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Recommended highest value for data packet rate (in packets 
+             per second)." 
+        ::= { jnxDfcNotifyVars 6 }
+
+    jnxDfcFlowsUsage OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "percent"
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "% usage of total number of flows in system."
+        ::= { jnxDfcNotifyVars 7 }
+
+    jnxDfcCriteriaUsage OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "percent"
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "% usage of matching criteria for all filters."
+        ::= { jnxDfcNotifyVars 8 }
+
+    jnxDfcMemSoftOverloadLowWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "percent"
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Configured lowest watermark percent for memory load."  
+        ::= { jnxDfcNotifyVars 9 }
+
+    jnxDfcMemSoftOverloadHighWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "percent"
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Configured highest watermark percent for memory load."  
+        ::= { jnxDfcNotifyVars 10 }
+
+    jnxDfcFlowLowWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Recommended lowest value for number of flows allowed in
+             the system."
+        ::= { jnxDfcNotifyVars 11 }
+
+    jnxDfcFlowHighWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Recommended highest value for number of flows allowed in
+             the system."
+        ::= { jnxDfcNotifyVars 12 }
+
+
+    jnxDfcCriteriaLowWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Recommended lowest value for number of criterias allowed 
+             in the system."
+        ::= { jnxDfcNotifyVars 13 }
+
+    jnxDfcCriteriaHighWatermark OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Recommended highest value for number of criterias allowed 
+             in the system."
+        ::= { jnxDfcNotifyVars 14 }
+
+--
+-- DFC PIC Notification definitions
+--
+
+    jnxDfcNotificationPrefix OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "All DFC notifications are registered under this branch."
+        ::= { jnxDfcNotifications 0 }
+
+
+    jnxDfcSoftPpsThresholdExceeded NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcInputPktRate,
+                  jnxDfcPpsSoftOverloadLowWatermark,
+                  jnxDfcPpsSoftOverloadHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of input packet rate (in packet per second) 
+             going beyond the configured limit."
+        ::= { jnxDfcNotificationPrefix 1 }
+
+
+    jnxDfcSoftPpsUnderThreshold NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcInputPktRate,
+                  jnxDfcPpsSoftOverloadLowWatermark,
+                  jnxDfcPpsSoftOverloadHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of input packet rate (in packet per second)
+             dropping back to below the configured limit."
+        ::= { jnxDfcNotificationPrefix 2 }
+
+
+    jnxDfcHardPpsThresholdExceeded NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcInputPktRate,
+                  jnxDfcPpsHardOverloadLowWatermark,
+                  jnxDfcPpsHardOverloadHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of input packet rate (in packet per second)
+             going beyond the recommended limit."
+        ::= { jnxDfcNotificationPrefix 3 }
+
+
+    jnxDfcHardPpsUnderThreshold NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcInputPktRate,
+                  jnxDfcPpsHardOverloadLowWatermark,
+                  jnxDfcPpsHardOverloadHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of input packet rate (in packet per second)
+             dropping back to below the recommended limit."
+        ::= { jnxDfcNotificationPrefix 4 }
+
+
+    jnxDfcSoftMemThresholdExceeded NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcFlowsUsage,
+                  jnxDfcCriteriaUsage,
+                  jnxDfcMemSoftOverloadLowWatermark,
+                  jnxDfcMemSoftOverloadHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of memory overload condition i.e memory usage 
+             is going beyond the configured limit."
+        ::= { jnxDfcNotificationPrefix 5 }
+
+
+    jnxDfcSoftMemUnderThreshold NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcFlowsUsage,
+                  jnxDfcCriteriaUsage,
+                  jnxDfcMemSoftOverloadLowWatermark,
+                  jnxDfcMemSoftOverloadHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of memory usage dropping back to below the 
+             configured limit."
+        ::= { jnxDfcNotificationPrefix 6 }
+
+
+    jnxDfcHardMemThresholdExceeded NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcFlowsUsage,
+                  jnxDfcFlowLowWatermark,
+                  jnxDfcFlowHighWatermark,
+                  jnxDfcCriteriaUsage,
+                  jnxDfcCriteriaLowWatermark,
+                  jnxDfcCriteriaHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of memory overload condition i.e memory usage
+             is going beyond the recommended limit."
+        ::= { jnxDfcNotificationPrefix 7 }
+
+
+    jnxDfcHardMemUnderThreshold NOTIFICATION-TYPE
+        OBJECTS { jnxDfcInterfaceName, 
+                  jnxDfcFlowsUsage,
+                  jnxDfcFlowLowWatermark,
+                  jnxDfcFlowHighWatermark,
+                  jnxDfcCriteriaUsage,
+                  jnxDfcCriteriaLowWatermark,
+                  jnxDfcCriteriaHighWatermark}
+        STATUS  current
+        DESCRIPTION
+            "Notification of memory usage dropping back to below the
+             recommended limit."
+        ::= { jnxDfcNotificationPrefix 8 }
+
+
+END

mibs/juniper/JUNIPER-DOM-MIB

@@ -0,0 +1,666 @@
+--
+-- Juniper Enterprise Specific MIB: SFF Digital Optical Monitor MIB
+-- 
+-- Copyright (c) 2010, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-DOM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    DateAndTime, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    jnxDomMibRoot, jnxDomNotifications, jnxDomLaneNotifications
+        FROM JUNIPER-SMI
+    ifIndex, ifDescr
+        FROM IF-MIB;
+
+-- DOM Alarm and Warning Type
+
+jnxDomMib MODULE-IDENTITY
+    LAST-UPDATED "201403200000Z" -- Thu Mar 03 2009 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This MIB module defines objects used for Digital Optical 
+             Monitor on  interface of Juniper products."
+    REVISION      "201403200000Z"
+    DESCRIPTION
+            "Change XFP references to generic SFF in descriptions.  Add
+             DOM lane table."
+    REVISION      "200912230000Z" 
+    DESCRIPTION
+            "Initial revision."
+    ::= { jnxDomMibRoot 1 }
+
+JnxDomAlarmId ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "Identifies specific DOM alarms that may exist on an
+             interface."
+    SYNTAX     BITS {
+        domRxLossSignalAlarm(0),               -- Input Loss of signal
+        domRxCDRLossLockAlarm(1),              -- Input Loss of Lock
+        domRxNotReadyAlarm(2),                 -- Input rx path
+        domRxLaserPowerHighAlarm(3),           -- Input laser power
+        domRxLaserPowerLowAlarm(4),            -- Input laser power
+        domTxLaserBiasCurrentHighAlarm(5),     -- Output laser bias current
+        domTxLaserBiasCurrentLowAlarm(6),      -- Output laser bias current
+        domTxLaserOutputPowerHighAlarm(7),     -- Output laser power
+        domTxLaserOutputPowerLowAlarm(8),      -- Output laser power
+        domTxDataNotReadyAlarm(9),             -- Output A/D data not ready
+        domTxNotReadyAlarm(10),                -- Output tx path
+        domTxLaserFaultAlarm(11),              -- Output laser safety
+        domTxCDRLossLockAlarm(12),             -- Output CDR
+        domModuleTemperatureHighAlarm(13),     -- Module temperature
+        domModuleTemperatureLowAlarm(14),      -- Module temperature
+        domModuleNotReadyAlarm(15),            -- Module MOD_NR
+        domModulePowerDownAlarm(16),           -- Module P_DOWN
+        domLinkDownAlarm(17),                  -- Wire Unplugged or Down
+        domModuleRemovedAlarm(18),             -- Module Unplugged or Down
+        domModuleVoltageHighAlarm(19),         -- Module Voltage High
+        domModuleVoltageLowAlarm(20)           -- Module Voltage Low
+    }
+
+JnxDomWarningId ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "Identifies specific DOM warnings that may exist on an
+             interface."
+    SYNTAX     BITS {
+        domRxLaserPowerHighWarning(0),         -- Input laser power
+        domRxLaserPowerLowWarning(1),          -- Input laser power
+        domTxLaserBiasCurrentHighWarning(2),   -- Output laser bias current
+        domTxLaserBiasCurrentLowWarning(3),    -- Output laser bias current
+        domTxLaserOutputPowerHighWarning(4),   -- Output laser power
+        domTxLaserOutputPowerLowWarning(5),    -- Output laser power
+        domModuleTemperatureHighWarning(6),    -- Module temperature
+        domModuleTemperatureLowWarning(7),     -- Module temperature
+        domModuleVoltageHighWarning(8),        -- Module voltage
+        domModuleVoltageLowWarning(9)          -- Module voltage
+    }
+
+JnxDomLaneAlarmId ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+           "Identifies specific DOM alarms that may exist on
+            a Lane of a SFF interface"
+   SYNTAX      BITS {
+       domLaneRxLaserPowerHighAlarm(0),
+       domLaneRxLaserPowerLowAlarm(1),
+       domLaneTxLaserBiasCurrentHighAlarm(2),
+       domLaneTxLaserBiasCurrentLowAlarm(3),
+       domLaneTxLaserOutputPowerHighAlarm(4),
+       domLaneTxLaserOutputPowerLowAlarm(5),
+       domLaneLaserTemperatureHighAlarm(6),
+       domLaneLaserTemperatureLowAlarm(7)
+   }
+
+JnxDomLaneWarningId ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+           "Identifies specific DOM warnings that may exist on
+            a Lane of a SFF interface"
+   SYNTAX      BITS {
+       domLaneRxLaserPowerHighWarning(0),
+       domLaneRxLaserPowerLowWarning(1),
+       domLaneTxLaserBiasCurrentHighWarning(2),
+       domLaneTxLaserBiasCurrentLowWarning(3),
+       domLaneTxLaserOutputPowerHighWarning(4),
+       domLaneTxLaserOutputPowerLowWarning(5),
+       domLaneLaserTemperatureHighWarning(6),
+       domLaneLaserTemperatureLowWarning(7)
+   }
+
+-- 
+-- Current DOM Statistics
+-- 
+
+jnxDomDigitalMonitoring OBJECT IDENTIFIER ::= { jnxDomMib 1 }
+
+jnxDomCurrentTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF JnxDomCurrentEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Information about Digital Optical Monitoring for this
+             interfaces on this router."
+    ::= { jnxDomDigitalMonitoring 1 }
+
+jnxDomCurrentEntry OBJECT-TYPE
+    SYNTAX     JnxDomCurrentEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Information about Digital Optical Monitoring 
+             for this interfaces on this router."
+    INDEX    { ifIndex }
+    ::= { jnxDomCurrentTable 1 }
+
+JnxDomCurrentEntry ::=
+    SEQUENCE {
+        jnxDomCurrentAlarms
+              JnxDomAlarmId,
+        jnxDomCurrentAlarmDate
+              DateAndTime,
+        jnxDomLastAlarms
+              JnxDomAlarmId,
+        jnxDomCurrentWarnings
+              JnxDomWarningId,
+        jnxDomCurrentRxLaserPower
+              Integer32,
+        jnxDomCurrentTxLaserBiasCurrent
+              Integer32,
+        jnxDomCurrentTxLaserOutputPower
+              Integer32,
+        jnxDomCurrentModuleTemperature
+              Integer32,
+        jnxDomCurrentRxLaserPowerHighAlarmThreshold
+              Integer32,
+        jnxDomCurrentRxLaserPowerLowAlarmThreshold
+              Integer32,
+        jnxDomCurrentRxLaserPowerHighWarningThreshold
+              Integer32,
+        jnxDomCurrentRxLaserPowerLowWarningThreshold
+              Integer32,
+        jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold
+              Integer32,
+        jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold
+              Integer32,
+        jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold
+              Integer32,
+        jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold
+              Integer32,
+        jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold
+              Integer32,
+        jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold
+              Integer32,
+        jnxDomCurrentTxLaserOutputPowerHighWarningThreshold
+              Integer32,
+        jnxDomCurrentTxLaserOutputPowerLowWarningThreshold
+              Integer32,
+        jnxDomCurrentModuleTemperatureHighAlarmThreshold
+              Integer32,
+        jnxDomCurrentModuleTemperatureLowAlarmThreshold
+              Integer32,
+        jnxDomCurrentModuleTemperatureHighWarningThreshold
+              Integer32,
+        jnxDomCurrentModuleTemperatureLowWarningThreshold
+              Integer32,
+        jnxDomCurrentModuleVoltage
+              Integer32,
+        jnxDomCurrentModuleVoltageHighAlarmThreshold
+              Integer32,
+        jnxDomCurrentModuleVoltageLowAlarmThreshold
+              Integer32,
+        jnxDomCurrentModuleVoltageHighWarningThreshold
+              Integer32,
+        jnxDomCurrentModuleVoltageLowWarningThreshold
+              Integer32,
+        jnxDomCurrentModuleLaneCount
+              Integer32
+    }
+
+    jnxDomCurrentAlarms OBJECT-TYPE
+        SYNTAX      JnxDomAlarmId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object identifies all the active DOM alarms 
+                 on a SFF physical interface on this router."
+        ::= { jnxDomCurrentEntry 1 }
+
+    jnxDomCurrentAlarmDate OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The system date and time when the management subsystem learned
+                 of the current alarm event."
+        ::= { jnxDomCurrentEntry 2 }
+
+    jnxDomLastAlarms OBJECT-TYPE
+        SYNTAX      JnxDomAlarmId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object identifies a copy of jnxDomCurrentAlarms 
+                 before last set or clear."
+        ::= { jnxDomCurrentEntry 3 }
+
+    jnxDomCurrentWarnings OBJECT-TYPE
+        SYNTAX      JnxDomWarningId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object identifies all the active DOM warnings
+                 on a SFF physical interface on this router."
+        ::= { jnxDomCurrentEntry 4 }
+
+    jnxDomCurrentRxLaserPower OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Receiver laser power."
+        ::= { jnxDomCurrentEntry 5 }
+
+    jnxDomCurrentTxLaserBiasCurrent OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 mA"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser bias current."
+        ::= { jnxDomCurrentEntry 6 }
+
+
+    jnxDomCurrentTxLaserOutputPower OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser output power."
+        ::= { jnxDomCurrentEntry 7 }
+
+    jnxDomCurrentModuleTemperature OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS  "Celsius (degrees C)"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module temperature."
+        ::= { jnxDomCurrentEntry 8 }
+
+    jnxDomCurrentRxLaserPowerHighAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Receiver laser power high alarm threshold."
+        ::= { jnxDomCurrentEntry 9 }
+
+    jnxDomCurrentRxLaserPowerLowAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Receiver laser power low alarm threshold."
+        ::= { jnxDomCurrentEntry 10 }
+
+    jnxDomCurrentRxLaserPowerHighWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Receiver laser power high warning threshold."
+        ::= { jnxDomCurrentEntry 11 }
+
+    jnxDomCurrentRxLaserPowerLowWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Receiver laser power low warning threshold."
+        ::= { jnxDomCurrentEntry 12 }
+
+    jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 mA"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser bias current high alarm threshold."
+        ::= { jnxDomCurrentEntry 13 }
+
+    jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 mA"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser bias current low alarm threshold."
+        ::= { jnxDomCurrentEntry 14 }
+
+    jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 mA"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser bias current high warning threshold."
+        ::= { jnxDomCurrentEntry 15 }
+
+    jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 mA"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser bias current low warning threshold."
+        ::= { jnxDomCurrentEntry 16 }
+
+    jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser power high alarm threshold."
+        ::= { jnxDomCurrentEntry 17 }
+
+    jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser power low alarm threshold."
+        ::= { jnxDomCurrentEntry 18 }
+
+    jnxDomCurrentTxLaserOutputPowerHighWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser power high warning threshold."
+        ::= { jnxDomCurrentEntry 19 }
+
+    jnxDomCurrentTxLaserOutputPowerLowWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Transmitter laser power low warning threshold."
+        ::= { jnxDomCurrentEntry 20 }
+
+    jnxDomCurrentModuleTemperatureHighAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "Celsius (degrees C)"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module temperature high alarm threshold."
+        ::= { jnxDomCurrentEntry 21 }
+
+    jnxDomCurrentModuleTemperatureLowAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "Celsius (degrees C)"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module temperature low alarm threshold."
+        ::= { jnxDomCurrentEntry 22 }
+
+    jnxDomCurrentModuleTemperatureHighWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "Celsius (degrees C)"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module temperature high warning threshold."
+        ::= { jnxDomCurrentEntry 23 }
+
+    jnxDomCurrentModuleTemperatureLowWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "Celsius (degrees C)"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module temperature low warning threshold."
+        ::= { jnxDomCurrentEntry 24 }
+
+    jnxDomCurrentModuleVoltage OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 V"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module voltage."
+        ::= { jnxDomCurrentEntry 25 }
+
+    jnxDomCurrentModuleVoltageHighAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 V"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module voltage high alarm threshold."
+        ::= { jnxDomCurrentEntry 26 }
+        
+    jnxDomCurrentModuleVoltageLowAlarmThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 V"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module voltage low alarm threshold."
+        ::= { jnxDomCurrentEntry 27 }
+        
+    jnxDomCurrentModuleVoltageHighWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 V"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module voltage high warning threshold."
+        ::= { jnxDomCurrentEntry 28 }
+        
+    jnxDomCurrentModuleVoltageLowWarningThreshold OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 V"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Module voltage low warning threshold."
+        ::= { jnxDomCurrentEntry 29 }
+
+    jnxDomCurrentModuleLaneCount OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                " Number of Lanes (Lasers) in this module"
+        ::= { jnxDomCurrentEntry 30 }
+
+-- 
+-- Current DOM Lane Statistics
+-- 
+
+jnxDomDigitalLaneMonitoring OBJECT IDENTIFIER ::= { jnxDomMib 2 }
+
+jnxDomModuleLaneTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF JnxDomCurrentLaneEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Table of information for this lane (Laser) of this
+             SFF optical module."
+    ::= { jnxDomDigitalLaneMonitoring 1 }
+
+jnxDomCurrentLaneEntry OBJECT-TYPE
+    SYNTAX     JnxDomCurrentLaneEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Information about Digital Optical Monitoring for this
+             lane of this SFF optical Module"
+    INDEX { ifIndex, jnxDomLaneIndex }
+    ::= { jnxDomModuleLaneTable 1 }
+
+JnxDomCurrentLaneEntry ::=
+    SEQUENCE {
+            jnxDomLaneIndex
+                      Integer32,
+            jnxDomCurrentLaneAlarms
+                      JnxDomLaneAlarmId,
+            jnxDomCurrentLaneAlarmDate
+                      DateAndTime,
+            jnxDomLaneLastAlarms
+                      JnxDomLaneAlarmId,
+            jnxDomCurrentLaneWarnings
+                      JnxDomLaneWarningId,
+            jnxDomCurrentLaneRxLaserPower
+                      Integer32,
+            jnxDomCurrentLaneTxLaserBiasCurrent
+                      Integer32,
+            jnxDomCurrentLaneTxLaserOutputPower
+                      Integer32,
+            jnxDomCurrentLaneLaserTemperature
+                      Integer32
+    }
+
+    jnxDomLaneIndex OBJECT-TYPE
+        SYNTAX      Integer32 (0..1000)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "A lane (Laser) on this SFF optical interface"
+        ::= {jnxDomCurrentLaneEntry 1}
+
+    jnxDomCurrentLaneAlarms OBJECT-TYPE
+        SYNTAX      JnxDomLaneAlarmId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object identifies all the active DOM alarms
+                 on a particular Lane of a SFF physical interface."
+        ::= {jnxDomCurrentLaneEntry 2}
+
+    jnxDomCurrentLaneAlarmDate OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The system date and time when the management subsystem learned
+                 of the current lane alarm event."
+        ::= {jnxDomCurrentLaneEntry 3}
+
+    jnxDomLaneLastAlarms OBJECT-TYPE
+        SYNTAX      JnxDomLaneAlarmId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object identifies a copy of jnxDomCurrentAlarms 
+                 before last set or clear."
+        ::= {jnxDomCurrentLaneEntry 4}
+
+    jnxDomCurrentLaneWarnings OBJECT-TYPE
+        SYNTAX      JnxDomLaneWarningId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object identifies all the active DOM warnings
+                 on a particular Lane of a SFF physical interface."
+        ::= {jnxDomCurrentLaneEntry 5}
+
+    jnxDomCurrentLaneRxLaserPower OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Receiver laser power on a particular Lane of a SFF
+                 physcial interface."
+        ::= {jnxDomCurrentLaneEntry 6}
+
+    jnxDomCurrentLaneTxLaserBiasCurrent OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.001 mA"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Transmitter laser bias on a particular Lane of a SFF
+                 physcial interface."
+        ::= {jnxDomCurrentLaneEntry 7}
+
+    jnxDomCurrentLaneTxLaserOutputPower OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "0.01 dbm"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Transmitter laser power on a particular Lane of a SFF
+                 physcial interface."
+        ::= {jnxDomCurrentLaneEntry 8}
+
+    jnxDomCurrentLaneLaserTemperature OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS  "Celsius (degrees C)"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Temperature of laser on a particular Lane of a SFF
+                 physcial interface."
+        ::= {jnxDomCurrentLaneEntry 9}
+
+--
+-- Configuration Management Notifications
+--
+
+jnxDomNotificationPrefix   OBJECT IDENTIFIER ::= { jnxDomNotifications 0 }
+
+    jnxDomAlarmSet NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxDomLastAlarms,
+                  jnxDomCurrentAlarms,
+                  jnxDomCurrentAlarmDate }
+        STATUS  current
+        DESCRIPTION
+                "Notification of a recently set Dom alarm."
+        ::= { jnxDomNotificationPrefix 1 }
+
+    jnxDomAlarmCleared NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxDomLastAlarms,
+                  jnxDomCurrentAlarms,
+                  jnxDomCurrentAlarmDate }
+        STATUS  current
+        DESCRIPTION
+                "Notification of a recently cleared Dom alarm."
+        ::= { jnxDomNotificationPrefix 2 }
+
+jnxDomLaneNotificationPrefix   OBJECT IDENTIFIER ::= { jnxDomLaneNotifications 0 }
+
+    jnxDomLaneAlarmSet NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxDomLaneIndex,
+                  jnxDomLaneLastAlarms,
+                  jnxDomCurrentLaneAlarms,
+                  jnxDomCurrentLaneAlarmDate }
+        STATUS  current
+        DESCRIPTION
+                "Notification of a recently set Dom Lane alarm."
+        ::= { jnxDomLaneNotificationPrefix 1 }
+
+    jnxDomLaneAlarmCleared NOTIFICATION-TYPE
+        OBJECTS { ifDescr,
+                  jnxDomLaneIndex,
+                  jnxDomLaneLastAlarms,
+                  jnxDomCurrentLaneAlarms,
+                  jnxDomCurrentLaneAlarmDate }
+        STATUS  current
+        DESCRIPTION
+                "Notification of a recently cleared Dom Lane alarm."
+        ::= { jnxDomLaneNotificationPrefix 2 }
+
+END
+

mibs/juniper/JUNIPER-EVENT-MIB

@@ -0,0 +1,134 @@
+-- *******************************************************************
+-- Juniper enterprise specific Event MIB. 
+--
+-- Copyright (c) 2002-2004, 2006, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+JUNIPER-EVENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, 
+    NOTIFICATION-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    DisplayString
+        FROM SNMPv2-TC
+    jnxMibs, jnxEventNotifications 
+        FROM JUNIPER-SMI;
+
+jnxEvent MODULE-IDENTITY
+    LAST-UPDATED "200608162153Z" -- Wed Aug 16 21:53:48 2005 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+             E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks implementation of enterprise
+             specific MIB for generic event notifications."
+
+    REVISION      "200608162153Z"
+    DESCRIPTION
+               "Initial revision."
+    ::= { jnxMibs 37 }
+
+
+--
+-- Notification objects
+--
+
+    jnxEventNotifyVars OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Notification object definitions."
+        ::= { jnxEvent 1 }
+
+    jnxEventTrapDescr OBJECT-TYPE
+      SYNTAX  DisplayString 
+      MAX-ACCESS  accessible-for-notify 
+      STATUS   current  
+      DESCRIPTION
+              "Description of the trap generated by op-script 
+               or event-policies."
+      ::= { jnxEventNotifyVars 1 }
+
+    jnxEventAvTable  OBJECT-TYPE
+      SYNTAX      SEQUENCE OF JnxEventAvEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "A table of attribute value pairs for the trap 
+             generated by the op-scripts or event-policies."
+      ::= { jnxEventNotifyVars 2 }
+
+    jnxEventAvEntry   OBJECT-TYPE
+      SYNTAX      JnxEventAvEntry 
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+            "An entry of attribute value pair."
+      INDEX     { jnxEventAvIndex }
+      ::= { jnxEventAvTable 1 }
+
+    JnxEventAvEntry ::=
+        SEQUENCE {
+          jnxEventAvIndex       Unsigned32,
+          jnxEventAvAttribute   DisplayString,
+          jnxEventAvValue       DisplayString
+        }
+
+    jnxEventAvIndex OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Identifies the sequence number of attribute-value
+             pair in the trap generated by  op-scripts or 
+             event-policies."
+        ::= { jnxEventAvEntry 1 }
+
+    jnxEventAvAttribute OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Attribute name in the trap generated by op-script 
+             or event-policies."
+        ::= { jnxEventAvEntry 2 }
+
+    jnxEventAvValue OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Value of the attribute identified by jnxEventAvAttribute."
+        ::= { jnxEventAvEntry 3 }
+
+
+--
+-- Event Notification definitions
+--
+    jnxEventNotificationPrefix OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "All Event notifications are registered under 
+             this branch."
+        ::= { jnxEventNotifications 0 }
+
+    jnxEventTrap NOTIFICATION-TYPE
+        OBJECTS { jnxEventTrapDescr }
+        STATUS  current
+        DESCRIPTION
+            "Notification generated by op-script or event-policies. Apart 
+             from the jnxEventTrap objects, this notification can include 
+	     one or more attribute-value pairs. The attribute-value pairs 
+	     shall be identified by objects jnxEventAvAttribute and 
+	     jnxEventAvValue."
+        ::= { jnxEventNotificationPrefix 1 }
+
+END

mibs/juniper/JUNIPER-EX-MAC-NOTIFICATION-MIB

@@ -0,0 +1,292 @@
+-- *****************************************************************
+-- Juniper Enterprise Specific MIB: EX-MAC-NOTIFICATION 
+--
+-- Copyright (c) 2008-2010, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *****************************************************************
+
+JUNIPER-EX-MAC-NOTIFICATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Counter64, NOTIFICATION-TYPE,
+        Unsigned32, TimeTicks, OBJECT-IDENTITY
+                FROM SNMPv2-SMI
+        TruthValue
+                FROM SNMPv2-TC
+        jnxMacNotificationRoot
+                FROM JUNIPER-EX-SMI;
+
+jnxMacNotificationMIB MODULE-IDENTITY
+    LAST-UPDATED "201004280000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+        "Juniper Technical Assistance Center
+         Juniper Networks, Inc.
+         1133 Innovation Way
+         Sunnyvale, CA 94089
+         E-mail: support@juniper.net"
+
+    DESCRIPTION
+        "This MIB module is for configuration of the MAC notification
+        feature. MAC notification is a mechanism to inform monitoring
+        devices when there are MAC addresses learnt or removed from
+        the forwarding database of the monitored devices." 
+
+    --revision history
+    REVISION  "200901200000Z"
+    DESCRIPTION
+            "Initial revision."    
+
+    REVISION  "200905270000Z"
+    DESCRIPTION
+            "Updated the description of the Objects."
+    
+    REVISION  "201002090000Z"
+    DESCRIPTION
+            "Updated the description of jnxHistMacChangedMsg. When next hop gets
+            changed the port information gets updated and is logged."
+
+    REVISION  "201004280000Z"
+    DESCRIPTION
+            "Added new scalar jnxMacAddressesUpdated which increments for each
+            mac address updated."
+
+    ::= { jnxMacNotificationRoot 1 }
+
+-- Juniper MAC Notification MIB object definitions
+
+jnxMacNotificationMIBObjects OBJECT IDENTIFIER
+    ::= { jnxMacNotificationMIB 1 }
+
+jnxMacNotificationMIBGlobalObjects     OBJECT IDENTIFIER
+    ::= { jnxMacNotificationMIBObjects 1 }
+
+--**********************************************************************
+-- Juniper Mac Notification Global Group
+--**********************************************************************
+
+jnxMacGlobalFeatureEnabled  OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates whether the MAC notification feature is currently 
+        running in the device.
+
+        Setting this object to false(2) disables the MAC notification
+        feature globally.
+
+        Setting this object to true(1) will start the MAC notification
+        feature running in the device. If the feature is already
+        running, setting to true(1) has no effect. "
+    ::= { jnxMacNotificationMIBGlobalObjects 1 }
+
+jnxMacNotificationInterval  OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..4294967295)
+    UNITS         "seconds"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object specifies the maximum interval of time between
+        jnxMacChangedNotifications being generated by the device.
+        If the value of jnxNotificationsEnabled is true(1), the
+        device will send out the generated jnxMacChangedNotifications
+        and archive the MAC change notification events in the
+        jnxMacHistoryTable. If the value of jnxNotificationEnabled is
+        false(2), the device will not send out the generated
+        jnxMacChangedNotifications but it will archive these events
+        in the jnxMacHistoryTable.   
+        
+        If the value of this object is equal to 0, the device will 
+        generate jnxMacChangedNotifications and archive the MAC 
+        change notification events in the jnxMacHistoryTable as soon as
+        there is MAC address learnt or removed by the device.
+
+        If the value of this object is greater than 0, the device will
+        wait for a period of time equal to the value of this object
+        before generate the jnxMacChangedNotifications and archive
+        the MAC change notification events in the jnxMacHistoryTable."
+    DEFVAL { 30 }
+    ::= { jnxMacNotificationMIBGlobalObjects 2 }
+
+jnxMacAddressesLearnt OBJECT-TYPE
+    SYNTAX        Counter64 
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the number of MAC addresses learnt by the
+        device." 
+    ::= { jnxMacNotificationMIBGlobalObjects 3 }
+
+jnxMacAddressesRemoved OBJECT-TYPE
+    SYNTAX        Counter64 
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the number of MAC addresses removed from the
+        forwarding database." 
+    ::= { jnxMacNotificationMIBGlobalObjects 4 }
+
+jnxMacNotificationsEnabled OBJECT-TYPE
+     SYNTAX          TruthValue
+     MAX-ACCESS      read-only
+     STATUS          current
+     DESCRIPTION
+         "Indicates whether jnxMacChangedNotification notifications
+          will or will not be sent when there are MAC addresses
+          learnt or removed from the device's forwarding database. 
+          Disabling notifications does not prevent the MAC address
+          info from being added to the jnxMacHistoryTable."
+     DEFVAL { false }
+     ::= { jnxMacNotificationMIBGlobalObjects 5 }
+
+jnxMacNotificationsSent OBJECT-TYPE
+    SYNTAX         Counter64
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+        "Indicates the number of jnxMacChangedNotifications sent out
+        by the device."
+    ::= { jnxMacNotificationMIBGlobalObjects 6 }
+
+jnxMacHistTableMaxLength OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..500)
+    UNITS           "entries"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The upper limit on the number of entries that the
+        jnxMacHistoryTable may contain.  A value of 0 will
+        prevent any history from being retained. When this
+        table is full, the oldest entry will be deleted and
+        a new one will be created."
+    DEFVAL  { 256 }
+    ::= { jnxMacNotificationMIBGlobalObjects 7 }
+
+jnxMacHistoryTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF JnxMacHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table will archive the MAC change notification events 
+        generated by this device. The MAC change notification
+        events are archived here even if jnxMacChangesNotifications 
+        are not actually sent."
+    ::= { jnxMacNotificationMIBGlobalObjects 8 }
+
+jnxMacHistoryEntry OBJECT-TYPE
+    SYNTAX     JnxMacHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A MAC change notification message that was previously
+        generated by this device.  Each entry is indexed by a message
+        index."
+    INDEX   { jnxHistIndex }
+    ::= { jnxMacHistoryTable 1 }
+
+JnxMacHistoryEntry ::=
+    SEQUENCE {
+        jnxHistIndex
+                Unsigned32,
+        jnxHistMacChangedMsg
+                OCTET STRING,
+        jnxHistTimestamp
+                TimeTicks
+    }
+
+jnxHistIndex OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An index that uniquely identifies a MAC change notification
+        event previously generated by the device. This index starts at
+        1 and increases by one when a MAC change notification is 
+        generated.  When it reaches the maximum value, the agent wraps
+        the value back to 1."
+    ::= { jnxMacHistoryEntry 1 }
+
+jnxHistMacChangedMsg OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(1..512))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object contains the information of a MAC change
+        notification event. It consists of several tuples packed
+        together in the format of '<tuple1><tuple2>...'.
+        
+        Each tuple consist of 13 octets in the format of
+        '<operation><VLAN><MAC><dot1dBasePort>' where 
+
+        <operation> is of size 1 octet and supports the following values
+          0 - End of MIB object.
+          1 - MAC learnt.
+          2 - MAC removed.
+          3 - MAC updated.
+
+        <VLAN> is VLAN number of the VLAN which the MAC address is
+        belonged to and has size of 2 octet.
+
+        <MAC> is the Layer2 Mac Address and has size of 6 octets.
+
+        <dot1dBasePort> is the value of dot1dBasePort for the
+        interface from which the MAC address is learnt and has size
+        of 4 octets."
+    ::= { jnxMacHistoryEntry 2 }
+
+jnxHistTimestamp  OBJECT-TYPE
+    SYNTAX          TimeTicks
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The value of sysUpTime when the jnxMacChangedNotification
+        containing the information denoted by the jnxHistMacChangedMsg
+        object in this entry was generated."
+    ::= { jnxMacHistoryEntry 3 }
+
+jnxMacAddressesUpdated OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the number of MAC addresses updated by the
+        device."
+    ::= { jnxMacNotificationMIBGlobalObjects 9 }
+
+-- ***********************************************************
+
+-- Mac NOTIFICATIONS
+
+-- ***********************************************************
+
+jnxMacNotifications  OBJECT IDENTIFIER  ::= { jnxMacNotificationRoot 2 }
+
+jnxMacNotificationsPrefix OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "All Mac Notifications are registered
+        under this branch."
+    ::= { jnxMacNotifications 0 }
+
+jnxMacChangedNotification NOTIFICATION-TYPE
+    OBJECTS { jnxHistMacChangedMsg, jnxHistTimestamp } 
+    STATUS  current
+    DESCRIPTION
+        "This notification is generated when there is enough MAC
+        address information to fully occupy a maximum size SNMP trap
+        message. This notification is also generated when there
+        is at least one MAC address changed or removed and the amount
+        of time elapsed from the previous notification is greater
+        than the maximum wait time denoted by
+        jnxNotificationInterval object.
+
+        If there are more MAC addresses information than can fit into
+        one cmmHistTrapContent object, then multiple notifications
+        will be generated."
+
+    ::= { jnxMacNotificationsPrefix 1 }
+
+END

mibs/juniper/JUNIPER-EX-SMI

@@ -0,0 +1,44 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+--
+-- Copyright (c) 2002-2009, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-EX-SMI DEFINITIONS ::= BEGIN
+
+IMPORTS
+                jnxExMibRoot            FROM JUNIPER-SMI;
+
+
+
+--
+-- This MIB file added the nodes to create the Juniper Security
+-- tree structure under the object node: jnxExObjects.
+-- In general, the prefix jnxEx is used to name the object identifiers
+-- and to designate them.
+--
+-- The jnxEx node is designed to provide a branch for the Switching
+-- related MIB defintions specific to the EX products.
+--
+
+--
+-- Object identifier added as the basis for identifying other EX nodes.
+--
+jnxExSwitching                   OBJECT IDENTIFIER ::= { jnxExMibRoot 1 }
+
+
+--
+-- next level object identifiers under jnxExSwitching
+--
+jnxExAnalyzer                    OBJECT IDENTIFIER ::= { jnxExSwitching 1 }
+jnxExSecureAccessPort            OBJECT IDENTIFIER ::= { jnxExSwitching 2 }
+jnxExPaeExtension                OBJECT IDENTIFIER ::= { jnxExSwitching 3 }
+jnxExVirtualChassis              OBJECT IDENTIFIER ::= { jnxExSwitching 4 }
+jnxExVlan                        OBJECT IDENTIFIER ::= { jnxExSwitching 5 }
+jnxRPS                           OBJECT IDENTIFIER ::= { jnxExSwitching 6 }
+jnxMacNotificationRoot           OBJECT IDENTIFIER ::= { jnxExSwitching 7 }
+END
+

mibs/juniper/JUNIPER-EXPERIMENT-MIB

@@ -0,0 +1,96 @@
+--
+-- Juniper Networks: SNMP Experimental MIB Registry
+-- 
+-- Copyright (c) 2003-2010, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-EXPERIMENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY
+        FROM SNMPv2-SMI               -- RFC 2578
+    juniperMIB, jnxExperiment
+        FROM JUNIPER-SMI;
+
+
+-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+-- Experimental MIB OID assignments.
+-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+jnxBgpM2Experiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The object identifier used to anchor the experimental IETF draft
+        for the BGPv2 MIB."
+    REFERENCE
+        "IETF Inter-Domain Routing Working Group documents:
+            draft-ietf-idr-bgp4-mibv2-03.txt"
+    ::= { jnxExperiment 1 }
+
+jnxLdapExperiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The object identifier used to anchor mibs for the internal juniper ldap
+        applications."
+    ::= { jnxExperiment 2 }
+
+jnxBfdExperiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The object identifier used to anchor the experimental IETF draft 
+         for the BFD MIB."
+    ::= { jnxExperiment 3 }
+
+jnxOspfv3Experiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The object identifier used to anchor the experimental IETF draft 
+         for the OSPFv3 MIB."
+    ::= { jnxExperiment 4 }
+
+jnxExampleMibRoot OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This branch anchors mibs used for private, internal sample 
+         implementations."
+    ::= { jnxExperiment 5 }
+
+jnxInternalMibRoot OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This branch is reserved for internal use."
+    ::= { jnxExperiment 6 }
+
+jnxP2mpExperiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The object identifier used to anchor the experimental IETF draft
+         for the P2MP MIB."
+    ::= { jnxExperiment 7 }
+
+jnxL2L3VpnMcastExperiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This branch anchors the experimental IETF draft for L2L3VpnMcast 
+         MIB."
+    ::= { jnxExperiment 11 }
+
+jnxMvpnExperiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This branch anchors the experimental IETF draft for Multicast
+         VPN MIB."
+    ::= { jnxExperiment 12 }
+    
+jnxMldpExperiment OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The object identifier used to anchor the experimental IETF draft
+         for the mLDP MIB."
+    ::= { jnxExperiment 13 }
+    
+
+END

mibs/juniper/JUNIPER-FABRIC-MIB

@@ -0,0 +1,306 @@
+--
+-- Juniper Enterprise Specific MIB: Fabric MIB
+-- 
+-- Copyright (c) 2012, Juniper Networks, Inc.
+-- All rights reserved.
+--
+
+JUNIPER-FABRIC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, Counter64
+        FROM SNMPv2-SMI
+
+    CounterBasedGauge64
+        FROM HCNUM-TC
+
+    TEXTUAL-CONVENTION 
+        FROM SNMPv2-TC
+
+    jnxFabricMibRoot
+        FROM JUNIPER-SMI;
+
+jnxFabricMib MODULE-IDENTITY
+
+    LAST-UPDATED "201410090000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                 Juniper Networks, Inc.
+                 1133 Innovation Way
+                 Sunnyvale, CA 94089
+                 E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "The MIB modules representing Juniper Networks
+             fabric Manager"
+
+    REVISION
+        "201410090000Z" -- 09-Oct-14 
+    DESCRIPTION
+        "Initial"
+
+    ::= { jnxFabricMibRoot 1 }
+
+jnxFabricMibObjects     OBJECT IDENTIFIER ::= { jnxFabricMib 1 }
+
+--
+-- Textual Conventions
+--
+
+JnxFabricType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A value representing fabric statistics source or destination type.
+
+         switch-fabric(1)       Indicates switch-fabric
+         linecard(2)            Indicates linecard"
+    REFERENCE   ""
+    SYNTAX       INTEGER {
+                     switch-fabric(1),
+                     linecard(2)
+                  }
+
+JnxFabricStatisticsPriority ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A value representing fabric statisitcs priority, if applicable.
+
+         high(0)     Indicates high priority
+         low(1)      Indicates low priority
+         all(255)    Indicates no specific priority"
+    REFERENCE   ""
+    SYNTAX       INTEGER {
+                     high(0),
+                     low(1),
+                     all(255)
+                  }
+                  
+-- Juniper Fabric Manager MIB
+--
+     
+--
+-- Fabric Statistics Table
+--
+
+jnxFabricStatistics     OBJECT IDENTIFIER ::= { jnxFabricMibObjects 1 }
+
+jnxFabricSourceStatisticsTable OBJECT-TYPE
+    SYNTAX	      SEQUENCE OF JnxFabricSourceStatisticsEntry
+    MAX-ACCESS        not-accessible
+    STATUS	      current
+    DESCRIPTION
+          "A list of fabric statistics entries based on the source of statistics."
+    ::= { jnxFabricStatistics 1 }
+
+    jnxFabricSourceStatisticsEntry OBJECT-TYPE
+      SYNTAX	    JnxFabricSourceStatisticsEntry
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+            "An entry of fabric source statistics table."
+      INDEX       { jnxFabricSourceType,
+                    jnxFabricSourceSlot,
+                    jnxFabricSourcePfe,
+                    jnxFabricDestinationType,
+                    jnxFabricDestinationSlot,
+                    jnxFabricDestinationPfe, 
+                    jnxFabricSourceStatisticsPriority}
+      ::= { jnxFabricSourceStatisticsTable 1 }
+
+    JnxFabricSourceStatisticsEntry ::= SEQUENCE {
+          jnxFabricSourceType                          JnxFabricType,
+          jnxFabricSourceSlot                          Integer32,
+          jnxFabricSourcePfe                           Integer32,
+          jnxFabricDestinationType                     JnxFabricType,
+          jnxFabricDestinationSlot                     Integer32,
+          jnxFabricDestinationPfe                      Integer32,
+          jnxFabricSourceStatisticsPriority            JnxFabricStatisticsPriority,
+          jnxFabricSourceStatisticsPackets             Counter64,
+          jnxFabricSourceStatisticsBytes               Counter64,
+          jnxFabricSourceStatisticsPps                 CounterBasedGauge64,
+          jnxFabricSourceStatisticsBps                 CounterBasedGauge64,
+          jnxFabricSourceStatisticsDropPackets         Counter64,
+          jnxFabricSourceStatisticsDropBytes           Counter64,
+          jnxFabricSourceStatisticsDropPps             CounterBasedGauge64,
+          jnxFabricSourceStatisticsDropBps             CounterBasedGauge64,
+          jnxFabricSourceStatisticsQueueDepthAverage   CounterBasedGauge64,
+          jnxFabricSourceStatisticsQueueDepthCurrent   CounterBasedGauge64,
+          jnxFabricSourceStatisticsQueueDepthPeak      CounterBasedGauge64,
+          jnxFabricSourceStatisticsQueueDepthMaximum   CounterBasedGauge64,
+          jnxFabricSourceStatisticsErrorPackets        Counter64,
+          jnxFabricSourceStatisticsErrorPps            CounterBasedGauge64
+    }
+ 
+
+    jnxFabricSourceType OBJECT-TYPE
+      SYNTAX	    JnxFabricType
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Source fabric type."
+      ::= { jnxFabricSourceStatisticsEntry 1 }
+
+    jnxFabricSourceSlot OBJECT-TYPE
+      SYNTAX	    Integer32 (0..1023 | 65535)
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Denotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535."
+      ::= { jnxFabricSourceStatisticsEntry 2 }
+
+    jnxFabricSourcePfe OBJECT-TYPE
+      SYNTAX	    Integer32 (0..8191 | 65535)
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Denotes pfe number. It is applicable only when source type is linecard and shall be 65535 for switch-fabric."
+      ::= { jnxFabricSourceStatisticsEntry 3 }
+
+    jnxFabricDestinationType OBJECT-TYPE
+      SYNTAX	    JnxFabricType
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Destination fabric type."
+      ::= { jnxFabricSourceStatisticsEntry 4 }
+
+    jnxFabricDestinationSlot OBJECT-TYPE
+      SYNTAX	    Integer32 (0..1023 | 65535)
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Denotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535."
+      ::= { jnxFabricSourceStatisticsEntry 5 }
+
+    jnxFabricDestinationPfe OBJECT-TYPE
+      SYNTAX	    Integer32 (0..8191 | 65535)
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Denotes pfe number. It is applicable only when destination type is linecard and shall be 65535 for switch-fabric."
+      ::= { jnxFabricSourceStatisticsEntry 6 }
+
+    jnxFabricSourceStatisticsPriority OBJECT-TYPE
+      SYNTAX	    JnxFabricStatisticsPriority
+      MAX-ACCESS    not-accessible
+      STATUS	    current
+      DESCRIPTION
+                "Statistics priority."
+      ::= { jnxFabricSourceStatisticsEntry 7 }
+      
+    jnxFabricSourceStatisticsPackets OBJECT-TYPE
+      SYNTAX	    Counter64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Number of packets transmitted for a source."
+      ::= { jnxFabricSourceStatisticsEntry 8 }
+      
+    jnxFabricSourceStatisticsBytes OBJECT-TYPE
+      SYNTAX	    Counter64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Number of bytes transmitted for a source."
+      ::= { jnxFabricSourceStatisticsEntry 9 }
+
+    jnxFabricSourceStatisticsPps OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Rate of transmission in packets per second for a source."
+      ::= { jnxFabricSourceStatisticsEntry 10 }
+
+    jnxFabricSourceStatisticsBps OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Rate of transmission in bytes per second for a source."
+      ::= { jnxFabricSourceStatisticsEntry 11 }
+
+    jnxFabricSourceStatisticsDropPackets OBJECT-TYPE
+      SYNTAX	    Counter64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Number of packets dropped for a source."
+      ::= { jnxFabricSourceStatisticsEntry 12 }
+
+    jnxFabricSourceStatisticsDropBytes OBJECT-TYPE
+      SYNTAX	    Counter64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Number of bytes dropped for a source."
+      ::= { jnxFabricSourceStatisticsEntry 13 }
+
+    jnxFabricSourceStatisticsDropPps OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Drop rate in packets per second for a source."
+      ::= { jnxFabricSourceStatisticsEntry 14 }
+
+    jnxFabricSourceStatisticsDropBps OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Drop rate in bytes per second for a source."
+      ::= { jnxFabricSourceStatisticsEntry 15 }
+
+    jnxFabricSourceStatisticsQueueDepthAverage OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Average queue depth, if applicable for a source type. Else it shall be 0."
+      ::= { jnxFabricSourceStatisticsEntry 16 }
+
+    jnxFabricSourceStatisticsQueueDepthCurrent OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Current queue depth, if applicable for a source type. Else it shall be 0."
+      ::= { jnxFabricSourceStatisticsEntry 17 }
+
+    jnxFabricSourceStatisticsQueueDepthPeak OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Peak queue depth, if applicable for a source type. Else it shall be 0."
+      ::= { jnxFabricSourceStatisticsEntry 18 }
+
+    jnxFabricSourceStatisticsQueueDepthMaximum OBJECT-TYPE
+      SYNTAX	    CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS	    current
+      DESCRIPTION
+                "Maximum queue depth, if applicable for a source type. Else it shall be 0."
+      ::= { jnxFabricSourceStatisticsEntry 19 }
+
+    jnxFabricSourceStatisticsErrorPackets OBJECT-TYPE
+      SYNTAX        Counter64
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+                "Number of errror packets for a source."
+      ::= { jnxFabricSourceStatisticsEntry 20 }
+
+    jnxFabricSourceStatisticsErrorPps OBJECT-TYPE
+      SYNTAX        CounterBasedGauge64
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+                "Error rate in packets per second for a source."
+      ::= { jnxFabricSourceStatisticsEntry 21 }
+
+END
+

mibs/juniper/JUNIPER-FIREWALL-MIB

@@ -0,0 +1,334 @@
+--
+-- Juniper Enterprise Specific MIB: Firewalls MIB
+-- 
+-- Copyright (c) 2000-2012, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-FIREWALL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter64
+        FROM SNMPv2-SMI
+    DisplayString
+        FROM SNMPv2-TC
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxFirewalls MODULE-IDENTITY
+    LAST-UPDATED "201601231553Z" -- Wed Jan 23 15:53:50 2016 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for firewalls filters/policers."
+
+    REVISION "201601231553Z" -- Wed Jan 23 15:53:50 2016 UTC
+    DESCRIPTION "MIB support for firewall Hier policer stats."
+    ::= { jnxMibs 5 }
+
+
+    jnxFirewallsTable   OBJECT-TYPE
+	SYNTAX      SEQUENCE OF JnxFirewallsEntry
+	MAX-ACCESS  not-accessible
+	STATUS      deprecated
+	DESCRIPTION
+		"A list of firewalls entries.
+		NOTE:  This table is deprecated and exists for backward
+		compatibility.  The user is encouraged to use
+		jnxFirewallCounterTable.  This table does not handle: 
+		1) counter and filter names greater than 24 characters 
+		2) counters with same names but different types (the first 
+		  duplicate is returned only)"
+
+
+	::= { jnxFirewalls 1 }
+
+    jnxFirewallsEntry      OBJECT-TYPE
+	SYNTAX      JnxFirewallsEntry
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+		"An entry of firewalls table."
+	INDEX	{ jnxFWFilter,
+		  jnxFWCounter }
+	::= { jnxFirewallsTable 1 }
+
+    JnxFirewallsEntry ::=
+	SEQUENCE {
+	    jnxFWFilter		   	DisplayString,
+	    jnxFWCounter		DisplayString,
+	    jnxFWType			INTEGER,
+	    jnxFWPackets		Counter64,
+	    jnxFWBytes			Counter64
+	}
+
+    jnxFWFilter OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..24))
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The name of the firewall filter."
+	::= { jnxFirewallsEntry 1 }
+
+    jnxFWCounter OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..24))
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The name of the counter, policer or Hier policer.  
+                This name is specific within the firewall filter.  
+                Whether this object is associated with a counter,
+                policer or a Hier policer is indicated by jnxFWType.
+		See DESCRIPTION of jnxFirewallsTable for details
+		on this assumption."
+	::= { jnxFirewallsEntry 2 }
+
+    jnxFWType OBJECT-TYPE
+	SYNTAX      INTEGER {
+		other(1),
+		counter(2),
+                policer(3),
+                hpolagg(4),
+                hpolpre(5)
+	}		
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The type of the object jnxFWCounter.  What it is 
+		associated with a counter, policer or Hier policer."
+	::= { jnxFirewallsEntry 3 }
+
+    jnxFWPackets OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The number of packets being counted pertaining to
+		the specified counter or policer."
+	::= { jnxFirewallsEntry 4 }
+
+    jnxFWBytes OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The number of bytes being counted pertaining to
+		the specified counter.  For policers, this field
+		is always zero because policers do not count 
+		number of bytes."
+	::= { jnxFirewallsEntry 5 }
+
+
+    jnxFirewallCounterTable   OBJECT-TYPE
+	SYNTAX      SEQUENCE OF JnxFirewallCounterEntry
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+		"A list of firewall filter counters."
+
+
+	::= { jnxFirewalls 2 }
+
+    jnxFirewallCounterEntry      OBJECT-TYPE
+	SYNTAX      JnxFirewallCounterEntry
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+		"An entry of firewalls table."
+	INDEX	{ jnxFWCounterFilterName,
+		  jnxFWCounterName,
+		  jnxFWCounterType }
+	::= { jnxFirewallCounterTable 1 }
+
+    JnxFirewallCounterEntry ::=
+	SEQUENCE {
+	    jnxFWCounterFilterName	DisplayString,
+	    jnxFWCounterName		DisplayString,
+	    jnxFWCounterType		INTEGER,
+	    jnxFWCounterPacketCount	Counter64,
+	    jnxFWCounterByteCount	Counter64,
+	    jnxFWCounterDisplayFilterName DisplayString,
+	    jnxFWCounterDisplayName	DisplayString,
+	    jnxFWCounterDisplayType	INTEGER
+	}
+
+    jnxFWCounterFilterName OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..127))
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+		"The name of the firewall filter."
+	::= { jnxFirewallCounterEntry 1 }
+
+    jnxFWCounterName OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..127))
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+		"The name of the counter, policer or Hier policer.  
+                This name is specific within the firewall filter.  
+                Whether this object is associated with a counter,
+                policer or a Hier policer is indicated by 
+                jnxFWCounterType."
+	::= { jnxFirewallCounterEntry 2 }
+
+    jnxFWCounterType OBJECT-TYPE
+	SYNTAX      INTEGER {
+		other(1),
+		counter(2),
+                policer(3),
+                hpolagg(4),
+                hpolpre(5)
+	}		
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+		"The type of the object jnxFWCounterName identifies.  What it
+		is associated with - a counter, policer or Hier policer.  It is 
+                possible to have two counters of the same name and different type."
+	::= { jnxFirewallCounterEntry 3 }
+
+    jnxFWCounterPacketCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The number of packets being counted pertaining to
+		the specified counter or policer."
+	::= { jnxFirewallCounterEntry 4 }
+
+    jnxFWCounterByteCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The number of bytes being counted pertaining to
+		the specified counter.  For policers, this field
+		is always zero because policers do not count 
+		number of bytes."
+	::= { jnxFirewallCounterEntry 5 }
+
+    jnxFWCounterDisplayFilterName OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..127))
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The name of the firewall filter."
+	::= { jnxFirewallCounterEntry 6 }
+
+    jnxFWCounterDisplayName OBJECT-TYPE
+	SYNTAX      DisplayString (SIZE(0..127))
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The name of the counter, policer or Hier policer.  Whether 
+                this object is associated with a counter, policer or Hier 
+                policer is indicated by jnxFWCounterType."
+	::= { jnxFirewallCounterEntry 7 }
+
+    jnxFWCounterDisplayType OBJECT-TYPE
+	SYNTAX      INTEGER {
+		other(1),
+		counter(2),
+		policer(3),
+                hpolagg(4),
+                hpolpre(5)
+	}		
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+		"The type of the object jnxFWCounterName identifies.  What it
+		is associated with - a counter, policer or Hier policer.  It is 
+                possible to have two counters of the same name and different type."
+	::= { jnxFirewallCounterEntry 8 }
+
+    jnxFWCntrXTable   OBJECT-TYPE
+	SYNTAX      SEQUENCE OF JnxFWCntrXEntry
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+	    "An extended list of firewall filter counters.
+	    This table maintains the additional statistics
+	    for the additional policer counters and is only
+	    supported on MX platform for now."
+
+
+	::= { jnxFirewalls 3 }
+
+    jnxFWCntrXEntry      OBJECT-TYPE
+	SYNTAX      JnxFWCntrXEntry
+	MAX-ACCESS  not-accessible
+	STATUS      current
+	DESCRIPTION
+	    "An entry of extended firewall table."
+	AUGMENTS    { jnxFirewallCounterEntry }
+	::= { jnxFWCntrXTable 1 }
+
+    JnxFWCntrXEntry ::=
+    SEQUENCE {
+           jnxFWCntrPolicerOfferedPktCount          Counter64,
+           jnxFWCntrPolicerOfferedByteCount         Counter64,
+           jnxFWCntrPolicerOutSpecPktCount          Counter64,
+           jnxFWCntrPolicerOutSpecByteCount         Counter64,
+           jnxFWCntrPolicerTxPktCount               Counter64,
+           jnxFWCntrPolicerTxByteCount              Counter64
+    }
+
+    jnxFWCntrPolicerOfferedPktCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+	    "  "
+	::= { jnxFWCntrXEntry 1 }
+
+    jnxFWCntrPolicerOfferedByteCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+	    "  "
+	::= { jnxFWCntrXEntry 2 }
+
+    jnxFWCntrPolicerOutSpecPktCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+	    "  "
+	::= { jnxFWCntrXEntry 3 }
+
+    jnxFWCntrPolicerOutSpecByteCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+	    "  "
+	::= { jnxFWCntrXEntry 4 }
+
+    jnxFWCntrPolicerTxPktCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+	    "  "
+	::= { jnxFWCntrXEntry 5 }
+
+    jnxFWCntrPolicerTxByteCount OBJECT-TYPE
+	SYNTAX      Counter64
+	MAX-ACCESS  read-only
+	STATUS      current
+	DESCRIPTION
+	    "  "
+	::= { jnxFWCntrXEntry 6 }
+    
+END

mibs/juniper/JUNIPER-FRU-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: FRU management for OTN Equipments
+-- 
+-- Copyright (c) 2012-2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-FRU-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Integer32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    jnxFruMibRoot, jnxFruTraps
+        FROM JUNIPER-SMI;
+
+
+jnxFruMib MODULE-IDENTITY
+    LAST-UPDATED "201211131414Z" -- Tue Nov 13 14:14:51 PST 2012
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This MIB module defines objects used for managing the
+             OTN FRU's for Juniper products."
+    REVISION      "201201260000Z"
+    DESCRIPTION
+               "Initial revision."
+    ::= { jnxFruMibRoot 1 }
+
+--
+-- Textual Conventions
+--
+JnxFruAdminStates ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "Admin states for a FRU"
+    SYNTAX       INTEGER {
+                    inService(1),
+                    outOfService(2)
+                 }
+JnxFruOperStates ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "Operation states for a FRU"
+    SYNTAX       INTEGER {
+                     unEquipped(1),  -- no FRU
+                     init(2),        -- init state
+                     normal(3),      -- normal state
+                     mismatched(4),  -- does not match configured FRU
+                     fault(5),       -- fru is in fault state
+                     swul(6)         -- ISSU Software upload state
+                 }
+
+jnxFruCfg           OBJECT IDENTIFIER ::= { jnxFruMib 1 }
+
+
+jnxFruCfgTable   OBJECT-TYPE
+        SYNTAX     SEQUENCE OF JnxFruCfgEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Information about the otn FRU's. "
+        ::= { jnxFruCfg 1 }
+
+jnxFruCfgEntry OBJECT-TYPE
+        SYNTAX     JnxFruCfgEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                 "Information about the otn FRU's."
+        INDEX   { jnxFruCfgContentsIndex, jnxFruCfgL1Index,
+                  jnxFruCfgL2Index, jnxFruCfgL3Index }
+        ::= { jnxFruCfgTable 1 }
+
+JnxFruCfgEntry ::=
+    SEQUENCE {
+        jnxFruCfgContentsIndex         Integer32,
+        jnxFruCfgL1Index               Integer32,
+        jnxFruCfgL2Index               Integer32,
+        jnxFruCfgL3Index               Integer32,
+        jnxFruCfgType                  OBJECT IDENTIFIER,
+        jnxFruCfgAdminState            JnxFruAdminStates,
+        jnxFruCfgOperState             JnxFruOperStates
+    }
+
+    jnxFruCfgContentsIndex OBJECT-TYPE
+        SYNTAX          Integer32 (1..'7fffffff'h)
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                "The associated jnxContentsContainerIndex in the 
+                jnxContentsTable."
+        ::= { jnxFruCfgEntry 1 }
+
+    jnxFruCfgL1Index OBJECT-TYPE
+        SYNTAX          Integer32 (0..'7fffffff'h)
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                "The level one index associated with this
+                subject.  Zero if unavailable or inapplicable."
+        ::= { jnxFruCfgEntry 2 }
+
+    jnxFruCfgL2Index OBJECT-TYPE
+        SYNTAX          Integer32 (0..'7fffffff'h)
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                "The level two index associated with this 
+                subject.  Zero if unavailable or inapplicable."
+        ::= { jnxFruCfgEntry 3 }
+
+    jnxFruCfgL3Index OBJECT-TYPE
+        SYNTAX          Integer32 (0..'7fffffff'h)
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                "The level three index associated with this
+                subject.  Zero if unavailable or inapplicable."
+        ::= { jnxFruCfgEntry 4 }
+
+    jnxFruCfgType OBJECT-TYPE
+        SYNTAX           OBJECT IDENTIFIER
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+                "The object ID for this FRU"
+        ::= { jnxFruCfgEntry 5 }
+ 
+    jnxFruCfgAdminState OBJECT-TYPE
+        SYNTAX          JnxFruAdminStates
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+                "The Administrative state of this FRU"
+        ::= { jnxFruCfgEntry 6 }
+
+    jnxFruCfgOperState OBJECT-TYPE
+        SYNTAX          JnxFruOperStates
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The Operational state of this FRU"
+        ::= { jnxFruCfgEntry 7 }
+
+
+--
+-- Traps for FRU config
+--
+-- This can be moved to jnx-chassis.mib
+jnxFruNotifMismatch NOTIFICATION-TYPE
+        OBJECTS         { jnxFruCfgContentsIndex,
+                          jnxFruCfgL1Index,
+                          jnxFruCfgL2Index,
+                          jnxFruCfgL3Index,
+                          jnxFruCfgType
+                          }
+        STATUS          current
+        DESCRIPTION
+                "A jnxFruInsertion trap signifies that the SNMP
+                entity, acting in an agent role, has detected that
+                the specified FRU (Field Replaceable Unit)  
+                inserted into the chassis does not match what was
+                configured."
+        ::= { jnxFruTraps 1 }
+
+jnxFruNotifAdminStatus NOTIFICATION-TYPE
+        OBJECTS         { jnxFruCfgContentsIndex,
+                          jnxFruCfgL1Index,
+                          jnxFruCfgL2Index,
+                          jnxFruCfgL3Index,
+                          jnxFruCfgAdminState
+                        }
+        STATUS  current
+        DESCRIPTION
+                "Notification of the Administrative state of the otn interface"
+        ::= { jnxFruTraps 2 }
+
+jnxFruNotifOperStatus NOTIFICATION-TYPE
+        OBJECTS         { jnxFruCfgContentsIndex,
+                          jnxFruCfgL1Index,
+                          jnxFruCfgL2Index,
+                          jnxFruCfgL3Index, 
+                          jnxFruCfgOperState
+                        }
+        STATUS  current
+        DESCRIPTION
+                "Notification of Operational state of the otn interface"
+        ::= { jnxFruTraps 3 }
+
+END

mibs/juniper/JUNIPER-HOSTRESOURCES-MIB

@@ -0,0 +1,89 @@
+--
+-- Juniper Enterprise Specific MIB: Host Resources MIB
+-- 
+-- Copyright (c) 2004, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-HOSTRESOURCES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Gauge32
+        FROM SNMPv2-SMI
+    hrStorageEntry
+        FROM HOST-RESOURCES-MIB
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+    jnxHostResourcesMIB  MODULE-IDENTITY
+        LAST-UPDATED "200408180000Z" -- Aug 18, 2004
+        ORGANIZATION "Juniper Networks, Inc." 
+        CONTACT-INFO
+                "        Juniper Technical Assistance Center
+    		     Juniper Networks, Inc.
+    		     1133 Innovation Way
+    		     Sunnyvale, CA 94089
+    		     E-mail: support@juniper.net"
+    
+        DESCRIPTION
+                "Extends the HOST-RESOURCES-MIB (rfc2790)."
+    
+        -- revision history
+        REVISION  "200408180000Z"
+        DESCRIPTION
+                "Fixed typo in description clauses."
+        REVISION  "200405050000Z"
+        DESCRIPTION
+                "Initial revision."
+        ::= { jnxMibs 31 }
+    
+
+   -- The Host Resources Storage Group
+
+    jnxHrStorage OBJECT IDENTIFIER ::= { jnxHostResourcesMIB 1 }
+    jnxHrSystem  OBJECT IDENTIFIER ::= { jnxHostResourcesMIB 2 }
+
+    jnxHrStorageTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxHrStorageEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Augments the hrStorageTable with additional data."
+       ::= { jnxHrStorage 1 }
+    
+    jnxHrStorageEntry OBJECT-TYPE
+        SYNTAX      JnxHrStorageEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Each entry provides additional file system data beyond that
+            available in the hrStorageTable."
+        AUGMENTS { hrStorageEntry }
+        ::= { jnxHrStorageTable 1 }
+    
+    JnxHrStorageEntry ::=
+        SEQUENCE {
+            jnxHrStoragePercentUsed    Gauge32
+        }
+
+    jnxHrStoragePercentUsed OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The amount of the storage represented by this entry
+            that is allocated, as a percentage of the total amount
+            available."
+        ::= { jnxHrStorageEntry 1 }
+
+    jnxHrSystemOpenFiles OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The Number of open files in the system."
+        ::= { jnxHrSystem 1 }
+
+END

mibs/juniper/JUNIPER-IF-ACCOUNTING-MIB

@@ -0,0 +1,329 @@
+-- *******************************************************************
+-- Juniper enterprise specific QoS based Interface Accounting MIB. 
+--
+-- Copyright (c) 2001-2006, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+JUNIPER-IF-ACCOUNTING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, 
+    Integer32, Counter64
+        FROM SNMPv2-SMI
+    CounterBasedGauge64                  
+        FROM HCNUM-TC       		
+    InterfaceIndex                       
+        FROM IF-MIB
+    JnxCosFcIdentifier
+        FROM JUNIPER-COS-MIB   
+    ifJnx
+        FROM JUNIPER-IF-MIB;
+        
+jnxIfAccountingStats        MODULE-IDENTITY
+    LAST-UPDATED "201312250000Z"                -- Wed Dec 25 12:00:00 2013 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+                 "Juniper Technical Assistance Center
+                      Juniper Networks, Inc.
+                      1133 Innovation Way
+                      Sunnyvale, CA 94089
+                      E-mail: support@juniper.net"
+
+    DESCRIPTION  "MIB module to define Forwarding Class based Interface statistics.
+                    The statistics will provide protocol specific statistics value
+                    which includes L2 overhead bytes. The mib is currently supported 
+                    only on MX platforms."
+    
+    REVISION     	"201305151223Z"             -- Wed May 25 12:23:51 2013 UTC
+    DESCRIPTION		"MIB module to define QoS based Interface accounting." 
+   
+    REVISION     	"201312250000Z"             -- Wed Dec 25 12:00:00 2013 UTC	
+    DESCRIPTION		"MIB module extended to support inline accounting for Per 
+					 Forwarding-class stats table for Aggregate
+					 (all types of traffic) pkt/byte counters & rate"
+					 
+    ::= { ifJnx 10 }    
+    
+-- ***************************************************************
+--  Per Forwarding-class stats table
+-- ***************************************************************
+    jnxIfFcAccountStatTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxIfFcAccountStatEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table presents the per forwarding-class and 
+             per protocol type statistics."
+        ::= { jnxIfAccountingStats 1 }
+
+
+    jnxIfFcAccountStatEntry OBJECT-TYPE
+        SYNTAX      JnxIfFcAccountStatEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table presents the per forwarding-class and 
+             per protocol type statistics. The indices of the 
+             table are Interface Index, Forwarding class Index
+             and Protocol type"
+        INDEX       { jnxIfFcIfIndex, jnxIfFcFcIndex, jnxIfFcProtocol }
+        ::= { jnxIfFcAccountStatTable 1 }
+        
+
+    JnxIfFcAccountStatEntry ::=
+        SEQUENCE {
+            jnxIfFcIfIndex              InterfaceIndex,
+            jnxIfFcFcIndex              JnxCosFcIdentifier,
+            jnxIfFcProtocol             INTEGER,
+
+            -- input packet/byte stats for unicast traffic
+            jnxIfFcHCInUcastPkts          Counter64,
+            jnxIfFcHCInUcastOctets        Counter64,
+
+            -- output packet/byte stats for unicast traffic
+            jnxIfFcHCOutUcastPkts         Counter64,
+            jnxIfFcHCOutUcastOctets       Counter64,
+
+            -- input packet/byte stats for multicast traffic
+            jnxIfFcHCInMcastPkts        Counter64,
+            jnxIfFcHCInMcastOctets      Counter64,
+
+            -- output packet/byte stats for multicast traffic
+            jnxIfFcHCOutMcastPkts       Counter64,
+            jnxIfFcHCOutMcastOctets     Counter64
+    }
+
+    jnxIfFcIfIndex OBJECT-TYPE 
+        SYNTAX      InterfaceIndex 
+        MAX-ACCESS  not-accessible 
+        STATUS      current
+        DESCRIPTION
+            "The ifIndex of the interface." 
+        ::= { jnxIfFcAccountStatEntry 1 }
+        
+        
+    jnxIfFcFcIndex OBJECT-TYPE 
+        SYNTAX      JnxCosFcIdentifier 
+        MAX-ACCESS  not-accessible 
+        STATUS      current
+        DESCRIPTION
+            "The Forwarding Class Index of the interface." 
+        ::= { jnxIfFcAccountStatEntry 2 }
+                
+            
+    --Protocol family for accounting all is aggregate of all types
+    jnxIfFcProtocol OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        all (1),
+                        ipv4 (2),
+                        ipv6 (3),
+                        mpls (4),
+                        layer2 (5),
+                        other (6)
+        }
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The protocol type of the entry's traffic."
+        ::= { jnxIfFcAccountStatEntry 3 }
+        
+    --input packet/byte stats for unicast traffic
+    jnxIfFcHCInUcastPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of unicast packets ingressed."
+        ::= { jnxIfFcAccountStatEntry 4 }
+
+    --input packet/byte stats for unicast traffic
+    jnxIfFcHCInUcastOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of unicast bytes ingressed."
+        ::= { jnxIfFcAccountStatEntry 5 }
+
+    --output packet/byte stats for unicast traffic
+    jnxIfFcHCOutUcastPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of unicast packets egressed."
+        ::= { jnxIfFcAccountStatEntry 6 }
+
+    --output packet/byte stats for unicast traffic
+    jnxIfFcHCOutUcastOctets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of unicast bytes egressed."
+        ::= { jnxIfFcAccountStatEntry 7 }
+
+    --input packet/byte stats for multicast traffic
+    jnxIfFcHCInMcastPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of multicast packets ingressed."
+        ::= { jnxIfFcAccountStatEntry 8 }
+
+    --input packet/byte stats for multicast traffic
+    jnxIfFcHCInMcastOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of multicast bytes ingressed."
+        ::= { jnxIfFcAccountStatEntry 9 }
+
+    --output packet/byte stats for multicast traffic
+    jnxIfFcHCOutMcastPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of multicast packets egressed."
+        ::= { jnxIfFcAccountStatEntry 10 }
+
+    --output packet/byte stats for multicast traffic
+    jnxIfFcHCOutMcastOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of multicast bytes egressed."
+        ::= { jnxIfFcAccountStatEntry 11 }
+
+
+		
+-- ***************************************************************
+--  Per Forwarding-class stats table for Aggregate(all types of traffic) pkt/byte counters & rate
+-- ***************************************************************
+    jnxIfFcInlineAccountingStatTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxIfFcInlineAccountingStatEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table presents the per forwarding-class and per family 
+        statistics without considering the traffic types."
+        ::= { jnxIfAccountingStats 2 }
+
+
+    jnxIfFcInlineAccountingStatEntry OBJECT-TYPE
+        SYNTAX      JnxIfFcInlineAccountingStatEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table presents the per forwarding-class and 
+             per protocol type statistics. The indices of the 
+             table are Interface Index, Forwarding class Index
+             and protocol(family) type as defined below."
+        INDEX       { jnxIfFcIfIndex, jnxIfFcFcIndex, jnxIfFcProtocol }
+        ::= { jnxIfFcInlineAccountingStatTable 1 }
+        
+
+    JnxIfFcInlineAccountingStatEntry ::=
+        SEQUENCE {
+            -- Indices of the table
+            jnxIfFcIfIndex                    InterfaceIndex,
+            jnxIfFcFcIndex                    JnxCosFcIdentifier,
+            jnxIfFcProtocol                   INTEGER,
+
+            -- input packet & rate stats for all types of traffic
+            jnxIfFcInlineHCInPkts                   Counter64,
+            jnxIfFcInlineHCInPktsSecRate            CounterBasedGauge64,
+            
+            -- input bytes & rate stats for all types of traffic
+            jnxIfFcInlineHCInOctets                 Counter64,
+            jnxIfFcInlineHCInOctetsSecRate          CounterBasedGauge64,
+
+            -- output packet & rate stats for all types of traffic
+            jnxIfFcInlineHCOutPkts                  Counter64,
+            jnxIfFcInlineHCOutPktsSecRate           CounterBasedGauge64,
+
+            -- output bytes & rate stats for all types of traffic            
+            jnxIfFcInlineHCOutOctets                Counter64,
+            jnxIfFcInlineHCOutOctetsSecRate         CounterBasedGauge64
+
+    }
+
+    --input packet stats for all types of traffic 
+    jnxIfFcInlineHCInPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of packets ingressed."
+        ::= { jnxIfFcInlineAccountingStatEntry 1 }
+
+    --input packets per sec rate 
+    jnxIfFcInlineHCInPktsSecRate OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The packets rate ingressed per second."
+        ::= { jnxIfFcInlineAccountingStatEntry 2 }
+
+    --input byte stats for all types of traffic
+    jnxIfFcInlineHCInOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of bytes ingressed."
+        ::= { jnxIfFcInlineAccountingStatEntry 3 }
+
+    --input bytes per sec for all types of traffic
+    jnxIfFcInlineHCInOctetsSecRate OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The bytes rate ingressed per second."
+        ::= { jnxIfFcInlineAccountingStatEntry 4 }
+
+    --output packets stats for all types of traffic 
+    jnxIfFcInlineHCOutPkts OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of packets egressed."
+        ::= { jnxIfFcInlineAccountingStatEntry 5 }
+
+    --output packets per sec for all types of traffic 
+    jnxIfFcInlineHCOutPktsSecRate OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The packets rate egressed per second."
+        ::= { jnxIfFcInlineAccountingStatEntry 6 }
+
+    --output byte stats for all types of traffic
+    jnxIfFcInlineHCOutOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of bytes egressed."
+        ::= { jnxIfFcInlineAccountingStatEntry 7 }
+
+    --output bytes per sec for all types of traffic
+    jnxIfFcInlineHCOutOctetsSecRate OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The bytes rate egressed per second."
+        ::= { jnxIfFcInlineAccountingStatEntry 8 }		
+END

mibs/juniper/JUNIPER-IPFORWARD-MIB

@@ -0,0 +1,118 @@
+--
+-- Juniper Enterprise Specific MIB: ipForward
+-- 
+-- Copyright (c) 2006-2012, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-IPFORWARD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI              -- RFC2578
+    SnmpAdminString
+	FROM SNMP-FRAMEWORK-MIB      -- RFC2571 
+    ipCidrRouteEntry
+	FROM IP-FORWARD-MIB          -- RFC2096
+    inetCidrRouteEntry
+        FROM IP-FORWARD-MIB          -- RFC4292
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxIpForwardMIB MODULE-IDENTITY
+    LAST-UPDATED "201111130000Z" -- Nov 13 00:00:00 2011 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise specific
+             portions of ipForward MIB.  Any data stored in this MIB 
+	     has directly related entries in mib-2,  ipForward MIB."
+
+    -- revision history
+    REVISION "201111130000Z" -- Nov 13 00:00:00 2011 UTC
+    DESCRIPTION
+            "jnxInetCidrRouteTunnelName deprecates jnxIpCidrRouteTunnelName."
+    ::= { jnxMibs 38 }
+
+
+
+--
+-- Ping Results Table extensions
+--
+
+jnxIpCidrRouteTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxIpCidrRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      deprecated
+    DESCRIPTION
+        "Augments the ipCidrRouteTable with additional data."
+   ::= { jnxIpForwardMIB 1 }
+
+jnxIpCidrRouteEntry OBJECT-TYPE
+    SYNTAX      JnxIpCidrRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      deprecated
+    DESCRIPTION
+        "Each entry provides additional CIDR forwarding information."
+    AUGMENTS { ipCidrRouteEntry }
+    ::= { jnxIpCidrRouteTable 1 }
+
+JnxIpCidrRouteEntry ::=
+    SEQUENCE {
+        jnxIpCidrRouteTunnelName        SnmpAdminString
+     }
+
+jnxIpCidrRouteTunnelName OBJECT-TYPE
+     SYNTAX        SnmpAdminString
+     -- MAX-ACCESS    read-create
+     MAX-ACCESS    read-only
+     STATUS        deprecated
+     DESCRIPTION
+           "The canonical name assigned to the tunnel. The router
+	    will forward traffic bound for the destination defined
+	    by the INDEX through this tunnel." 
+      DEFVAL {""}
+      ::= { jnxIpCidrRouteEntry 1 }
+
+jnxInetCidrRouteTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxInetCidrRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Augments the inetCidrRouteTable with additional data."
+   ::= { jnxIpForwardMIB 2 }
+
+jnxInetCidrRouteEntry OBJECT-TYPE
+    SYNTAX      JnxInetCidrRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each entry provides additional CIDR forwarding information."
+    AUGMENTS { inetCidrRouteEntry }
+    ::= { jnxInetCidrRouteTable 1 }
+
+JnxInetCidrRouteEntry ::=
+    SEQUENCE {
+        jnxInetCidrRouteTunnelName        SnmpAdminString
+     }
+
+jnxInetCidrRouteTunnelName OBJECT-TYPE
+     SYNTAX        SnmpAdminString
+     MAX-ACCESS    read-only
+     STATUS        current
+     DESCRIPTION
+           "The canonical name assigned to the tunnel. The router
+            will forward traffic bound for the destination defined
+            by the INDEX through this tunnel."
+      DEFVAL {""}
+      ::= { jnxInetCidrRouteEntry 1 }
+
+END

mibs/juniper/JUNIPER-IPv4-MIB

@@ -0,0 +1,130 @@
+--
+-- $Id: jnx-ipv4.mib,v 1.3 2003-07-18 22:57:37 dchuang Exp $
+-- Juniper Enterprise Specific MIB: ipv4 MIB Extension
+-- 
+-- Copyright (c) 2001-2003, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-IPv4-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, IpAddress
+        FROM SNMPv2-SMI
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxIpv4 MODULE-IDENTITY
+    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:52 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "The MIB modules extends the ifTable as
+             defined in IF-MIB."
+    REVISION      "200108310000Z" 
+    DESCRIPTION
+               "Initial revision."
+    ::= { jnxMibs 12 }
+
+
+
+--
+-- define branches for ipv4 config info
+--
+jnxIpv4Config        OBJECT IDENTIFIER ::= { jnxIpv4 1 }
+
+--
+-- Ipv4 Address Table
+--
+    jnxIpv4AddrTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxIpv4AddrEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The table of addressing information relevant to this
+                entity's IP addresses."
+        ::= { jnxIpv4Config 1 }
+    
+    jnxIpv4AddrEntry OBJECT-TYPE
+        SYNTAX      JnxIpv4AddrEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The addressing information for one of this entity's IP
+                addresses."
+        INDEX      { jnxIpv4AdEntIfIndex, jnxIpv4AdEntAddr }
+        ::= { jnxIpv4AddrTable 1 }
+    
+    JnxIpv4AddrEntry ::= SEQUENCE {
+            jnxIpv4AdEntIfIndex       INTEGER,
+            jnxIpv4AdEntAddr          IpAddress,
+            jnxIpv4AdEntNetMask       IpAddress,
+            jnxIpv4AdEntBcastAddr     INTEGER,
+            jnxIpv4AdEntReasmMaxSize  INTEGER
+        }
+    
+    jnxIpv4AdEntIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The index value which uniquely identifies the interface to
+                which this entry is applicable.  The interface identified by
+                a particular value of this index is the same interface as
+                identified by the same value of RFC 1573's ifIndex."
+        ::= { jnxIpv4AddrEntry 1 }
+
+    jnxIpv4AdEntAddr OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The IP address to which this entry's addressing information
+                pertains."
+        ::= { jnxIpv4AddrEntry 2 }
+    
+    jnxIpv4AdEntNetMask OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The subnet mask associated with the IP address of this
+                entry.  The value of the mask is an IP address with all the
+                network bits set to 1 and all the hosts bits set to 0."
+        ::= { jnxIpv4AddrEntry 3 }
+    
+    jnxIpv4AdEntBcastAddr OBJECT-TYPE
+        SYNTAX      INTEGER (0..1)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The value of the least-significant bit in the IP broadcast
+                address used for sending datagrams on the (logical)
+                interface associated with the IP address of this entry.  For
+                example, when the Internet standard all-ones broadcast
+                address is used, the value will be 1.  This value applies to
+                both the subnet and network broadcasts addresses used by the
+                entity on this (logical) interface."
+        ::= { jnxIpv4AddrEntry 4 }
+    
+    jnxIpv4AdEntReasmMaxSize OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The size of the largest IP datagram which this entity can
+                re-assemble from incoming IP fragmented datagrams received
+                on this interface."
+        ::= { jnxIpv4AddrEntry 5 }
+    
+    
+
+END

mibs/juniper/JUNIPER-IPv6-MIB

@@ -0,0 +1,992 @@
+--
+-- $Id: jnx-ipv6.mib,v 1.3 2003-07-18 22:57:37 dchuang Exp $
+-- Juniper Enterprise Specific MIB: ipv6 MIB Extension
+-- 
+-- Copyright (c) 2001-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-IPv6-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter64
+        FROM SNMPv2-SMI
+   ipv6IfEntry 
+        FROM IPV6-MIB
+    jnxMibs
+        FROM JUNIPER-SMI;
+
+jnxIpv6 MODULE-IDENTITY
+    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:53 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "The MIB modules extends the ifTable as
+             defined in IF-MIB."
+    REVISION      "200108310000Z" 
+    DESCRIPTION
+               "Initial revision."
+    ::= { jnxMibs 11 }
+
+
+
+--
+-- define branches for ipv6 stats
+--
+jnxIpv6Stats         OBJECT IDENTIFIER ::= { jnxIpv6 1 }
+jnxIpv6GlobalStats   OBJECT IDENTIFIER ::= { jnxIpv6Stats 1 }
+jnxIcmpv6GlobalStats OBJECT IDENTIFIER ::= { jnxIpv6Stats 2 }
+jnxIpv6IfStats       OBJECT IDENTIFIER ::= { jnxIpv6Stats 3 }
+
+--
+-- Ipv6 Global Stats
+--
+
+    jnxIpv6StatsReceives OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received."
+         ::= { jnxIpv6GlobalStats 1 }
+
+    jnxIpv6StatsTooShorts OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with size smaller than minimum."
+         ::= { jnxIpv6GlobalStats 2 }
+
+    jnxIpv6StatsTooSmalls OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with data size less than data 
+             length."
+         ::= { jnxIpv6GlobalStats 3 }
+
+    jnxIpv6StatsBadOptions OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets encountering errors in option 
+             processing."
+         ::= { jnxIpv6GlobalStats 4 }
+
+    jnxIpv6StatsBadVersions OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with incorrect version number."
+         ::= { jnxIpv6GlobalStats 5 }
+
+    jnxIpv6StatsFragments OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of packet fragments received." 
+         ::= { jnxIpv6GlobalStats 6 }
+
+    jnxIpv6StatsFragDrops OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of fragments dropped (duplicates or out of 
+             space)."
+         ::= { jnxIpv6GlobalStats 7 }
+
+    jnxIpv6StatsFragTimeOuts OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of fragments dropped due to timeouts."
+         ::= { jnxIpv6GlobalStats 8 }
+
+    jnxIpv6StatsFragOverFlows OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of fragments that exceeded limit."
+         ::= { jnxIpv6GlobalStats 9 }
+
+    jnxIpv6StatsReasmOKs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets reassembled successfully."
+         ::= { jnxIpv6GlobalStats 10 }
+
+    jnxIpv6StatsDelivers OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets delivered to upper layers."
+         ::= { jnxIpv6GlobalStats 11 }
+
+    jnxIpv6StatsForwards OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets forwarded."
+         ::= { jnxIpv6GlobalStats 12 }
+
+    jnxIpv6StatsUnreachables OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received for unreachable 
+             destinations."
+         ::= { jnxIpv6GlobalStats 13 }
+
+    jnxIpv6StatsRedirects OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets forwarded on the same net as 
+             received."
+         ::= { jnxIpv6GlobalStats 14 }
+
+    jnxIpv6StatsOutRequests OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets generated by this host."
+         ::= { jnxIpv6GlobalStats 15 }
+
+    jnxIpv6StatsRawOuts OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets sent with fabricated IPv6 
+             headers."
+         ::= { jnxIpv6GlobalStats 16 }
+
+    jnxIpv6StatsOutDiscards OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of output IPv6 packets dropped due to no bufs, 
+             etc."
+         ::= { jnxIpv6GlobalStats 17 }
+
+    jnxIpv6StatsOutNoRoutes OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of output IPv6 packets discarded because no route
+             could be found."
+         ::= { jnxIpv6GlobalStats 18 }
+
+    jnxIpv6StatsOutFragOKs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of output IPv6 packets fragmented."
+         ::= { jnxIpv6GlobalStats 19 }
+
+    jnxIpv6StatsOutFragCreates OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of output IPv6 packets that have been generated
+             as a result of fragmentation at the output interface."
+         ::= { jnxIpv6GlobalStats 20 }
+
+    jnxIpv6StatsOutFragFails OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of output IPv6 packets that can't be fragmented."
+         ::= { jnxIpv6GlobalStats 21 }
+
+    jnxIpv6StatsBadScopes OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets that violate scope rules."
+         ::= { jnxIpv6GlobalStats 22 }
+
+    jnxIpv6StatsNotMcastMembers OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 multicast packets which we don't join."
+         ::= { jnxIpv6GlobalStats 23 }
+
+    jnxIpv6StatsHdrNotContinuous OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets whose headers are not continuous."
+         ::= { jnxIpv6GlobalStats 24 }
+
+    jnxIpv6StatsNoGifs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of tunneling IPv6 packets that can't find gif."
+         ::= { jnxIpv6GlobalStats 25 }
+
+    jnxIpv6StatsTooManyHdrs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets discarded due to too many 
+             headers."
+         ::= { jnxIpv6GlobalStats 26 }
+
+    jnxIpv6StatsForwCacheHits OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of forward cache hits."
+         ::= { jnxIpv6GlobalStats 27 }
+
+    jnxIpv6StatsForwCacheMisses OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of forward cache misses."
+         ::= { jnxIpv6GlobalStats 28 }
+
+    jnxIpv6StatsOutDeadNextHops OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of output IPv6 packets destined to dead next 
+             hops."
+         ::= { jnxIpv6GlobalStats 29 }
+
+    jnxIpv6StatsOptRateDrops OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 option packets dropped due to rate 
+             limits."
+         ::= { jnxIpv6GlobalStats 30 }
+
+    jnxIpv6StatsMCNoDests OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 Multicast packets dropped due to no 
+             destination."
+         ::= { jnxIpv6GlobalStats 31 }
+
+    --
+    -- The following objects provide counts of all the different IPv6
+    -- next header types received 
+    --
+
+    jnxIpv6StatsInHopByHops OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with a Hop by Hop 
+             next header." 
+         ::= { jnxIpv6GlobalStats 32 }
+
+    jnxIpv6StatsInIcmps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with an ICMP(v4) next
+             header." 
+         ::= { jnxIpv6GlobalStats 33 }
+
+    jnxIpv6StatsInIgmps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with an IGMP next 
+             header." 
+         ::= { jnxIpv6GlobalStats 34 }
+
+    jnxIpv6StatsInIps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with an IPv4 next 
+             header." 
+         ::= { jnxIpv6GlobalStats 35 }
+
+    jnxIpv6StatsInTcps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with a TCP  next header." 
+         ::= { jnxIpv6GlobalStats 36 }
+
+    jnxIpv6StatsInUdps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with a UDP  next header." 
+         ::= { jnxIpv6GlobalStats 37 }
+
+    jnxIpv6StatsInIdps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with an xns IDP  
+             next header." 
+         ::= { jnxIpv6GlobalStats 38 }
+
+    jnxIpv6StatsInTps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets received with a TP4  next header." 
+         ::= { jnxIpv6GlobalStats 39 }
+
+    jnxIpv6StatsInIpv6s OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an IPv6  next header." 
+         ::= { jnxIpv6GlobalStats 40 }
+
+    jnxIpv6StatsInRoutings OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an IPv6 Routing next header."
+         ::= { jnxIpv6GlobalStats 41 }
+
+    jnxIpv6StatsInFrags OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an IPv6 Fragment next 
+             header." 
+         ::= { jnxIpv6GlobalStats 42 }
+
+    jnxIpv6StatsInEsps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an IPv6 ESP next header." 
+         ::= { jnxIpv6GlobalStats 43 }
+
+    jnxIpv6StatsInAhs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an IPv6 AH next header." 
+         ::= { jnxIpv6GlobalStats 44 }
+
+    jnxIpv6StatsInIcmpv6s OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an ICMPv6 next header." 
+         ::= { jnxIpv6GlobalStats 45 }
+
+    jnxIpv6StatsInNoNhs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with no next header." 
+         ::= { jnxIpv6GlobalStats 46 }
+
+    jnxIpv6StatsInDestOpts OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an IPv6 Destination Option 
+             next header." 
+         ::= { jnxIpv6GlobalStats 47 }
+
+    jnxIpv6StatsInIsoIps OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an ISO CLNP next header." 
+         ::= { jnxIpv6GlobalStats 48 }
+
+    jnxIpv6StatsInOspfs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an OSPF next header." 
+         ::= { jnxIpv6GlobalStats 49 }
+
+    jnxIpv6StatsInEths OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with an Ethernet next header." 
+         ::= { jnxIpv6GlobalStats 50 }
+
+    jnxIpv6StatsInPims OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of IPv6 packets with a PIM next header." 
+         ::= { jnxIpv6GlobalStats 51 }
+
+--
+-- Icmpv6 Global Stats
+--
+
+    jnxIcmpv6StatsErrors OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of calls to icmp_error."
+         ::= { jnxIcmpv6GlobalStats 1 }
+
+    jnxIcmpv6StatsCantErrors OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of errors not generated because the the old
+            message was an icmp error."
+         ::= { jnxIcmpv6GlobalStats 2 }
+
+    jnxIcmpv6StatsTooFreqs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of errors not generated due to rate limitations."
+         ::= { jnxIcmpv6GlobalStats 3 }
+
+    jnxIcmpv6StatsBadCodes OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of messages with bad code fields."
+         ::= { jnxIcmpv6GlobalStats 4 }
+
+    jnxIcmpv6StatsTooShorts OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of messages less than the minimum length."
+         ::= { jnxIcmpv6GlobalStats 5 }
+
+    jnxIcmpv6StatsBadChecksums OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of messages with bad checksums."
+         ::= { jnxIcmpv6GlobalStats 6 }
+
+    jnxIcmpv6StatsBadLenths OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of messages with bad length."
+         ::= { jnxIcmpv6GlobalStats 7 }
+
+    jnxIcmpv6StatsNoRoutes OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'no route' messages generated."
+         ::= { jnxIcmpv6GlobalStats 8 }
+
+    jnxIcmpv6StatsAdminProhibits OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'administratively prohibited' messages 
+            generated."
+         ::= { jnxIcmpv6GlobalStats 9 }
+
+    jnxIcmpv6StatsBeyondScopes OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'beyond scope' messages generated."
+         ::= { jnxIcmpv6GlobalStats 10 }
+
+    jnxIcmpv6StatsAddrUnreachs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'address unreachable' messages generated."
+         ::= { jnxIcmpv6GlobalStats 11 }
+
+    jnxIcmpv6StatsPortUnreachs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'port unreachable' messages generated."
+         ::= { jnxIcmpv6GlobalStats 12 }
+
+    jnxIcmpv6StatsTooBigs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'Packet Too Big' messages generated."
+         ::= { jnxIcmpv6GlobalStats 13 }
+
+    jnxIcmpv6StatsExceedTrans OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'time exceed transit' messages generated."
+         ::= { jnxIcmpv6GlobalStats 14 }
+
+    jnxIcmpv6StatsExceedReasms OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'time exceed reassembly' messages generated."
+         ::= { jnxIcmpv6GlobalStats 15 }
+
+    jnxIcmpv6StatsBadHdrFields OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'erroneous header field' messages generated."
+         ::= { jnxIcmpv6GlobalStats 16 }
+
+    jnxIcmpv6StatsBadNextHdrs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'unrecognized next header' messages generated."
+         ::= { jnxIcmpv6GlobalStats 17 }
+
+    jnxIcmpv6StatsBadOptions OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'unrecognized option' messages generated."
+         ::= { jnxIcmpv6GlobalStats 18 }
+
+    jnxIcmpv6StatsRedirects OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'redirect' messages generated."
+         ::= { jnxIcmpv6GlobalStats 19 }
+
+    jnxIcmpv6StatsOthers OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of generated messages types other than the ones 
+             listed above."
+         ::= { jnxIcmpv6GlobalStats 20 }
+
+    jnxIcmpv6StatsResponses OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of message responses generated."
+         ::= { jnxIcmpv6GlobalStats 21 }
+
+    jnxIcmpv6StatsExcessNDOptions OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of messages processed with too many ND options."
+         ::= { jnxIcmpv6GlobalStats 22 }
+
+    --
+    -- The following objects provide counts of all the different ICMPv6
+    -- message types received and transmitted.
+    --
+
+    jnxIcmpv6StatsInUnreachables OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Unreachable messages received."
+         ::= { jnxIcmpv6GlobalStats 23 }
+
+    jnxIcmpv6StatsInPktTooBigs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'Packet Too Big' messages received."
+         ::= { jnxIcmpv6GlobalStats 24 }
+
+    jnxIcmpv6StatsInTimeExceeds OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Time Exceeded messages received."
+         ::= { jnxIcmpv6GlobalStats 25 }
+
+    jnxIcmpv6StatsInParamProbs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Parameter Problem messages received."
+         ::= { jnxIcmpv6GlobalStats 26 }
+
+    jnxIcmpv6StatsInEchoReqs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Echo Request messages received."
+         ::= { jnxIcmpv6GlobalStats 27 }
+
+    jnxIcmpv6StatsInEchoReplies OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Echo Reply messages received."
+         ::= { jnxIcmpv6GlobalStats 28 }
+
+    jnxIcmpv6StatsInMLQueries OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Multicast Listener Query messages received."
+         ::= { jnxIcmpv6GlobalStats 29 }
+
+    jnxIcmpv6StatsInMLReports OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Multicast Listener Report messages received."
+         ::= { jnxIcmpv6GlobalStats 30 }
+
+    jnxIcmpv6StatsInMLDones OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Multicast Listener Done messages received."
+         ::= { jnxIcmpv6GlobalStats 31 }
+
+    jnxIcmpv6StatsInRtrSolicits OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Router Solicitation messages received."
+         ::= { jnxIcmpv6GlobalStats 32 }
+
+    jnxIcmpv6StatsInRtrAdvs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Router Advertisment messages received."
+         ::= { jnxIcmpv6GlobalStats 33 }
+
+    jnxIcmpv6StatsInNbrSolicits OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Neighbor Solicitation messages received."
+         ::= { jnxIcmpv6GlobalStats 34 }
+
+    jnxIcmpv6StatsInNbrAdvs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Neighbor Advertisement messages received."
+         ::= { jnxIcmpv6GlobalStats 35 }
+
+    jnxIcmpv6StatsInRedirects OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Redirect messages received."
+         ::= { jnxIcmpv6GlobalStats 36 }
+
+    jnxIcmpv6StatsInRtrRenumbers OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Router Renumber messages received."
+         ::= { jnxIcmpv6GlobalStats 37 }
+
+    jnxIcmpv6StatsInNIReqs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Node Information Request messages received."
+         ::= { jnxIcmpv6GlobalStats 38 }
+
+    jnxIcmpv6StatsInNIReplies OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Node Information Report messages received."
+         ::= { jnxIcmpv6GlobalStats 39 }
+
+    jnxIcmpv6StatsOutUnreachables OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Unreachable messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 40 }
+
+    jnxIcmpv6StatsOutPktTooBigs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of 'Packet Too Big' messages to be transmitted.
+            Some of these icmp messages may not be actually sent out (problems
+            with rate limits, source addresses, etc). jnxIcmpv6StatsTooBigs 
+            represents the number of 'Too Big Packet' messages that actually
+            get out."
+         ::= { jnxIcmpv6GlobalStats 41 }
+
+    jnxIcmpv6StatsOutTimeExceeds OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Time Exceeded messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 42 }
+
+    jnxIcmpv6StatsOutParamProbs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Parameter Problem messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 43 }
+
+    jnxIcmpv6StatsOutEchoReqs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Echo Request messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 44 }
+
+    jnxIcmpv6StatsOutEchoReplies OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Echo Reply messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 45 }
+
+    jnxIcmpv6StatsOutMLQueries OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Multicast Listener Query messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 46 }
+
+    jnxIcmpv6StatsOutMLReports OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Multicast Listener Report messages 
+             transmitted."
+         ::= { jnxIcmpv6GlobalStats 47 }
+
+    jnxIcmpv6StatsOutMLDones OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Multicast Listener Done messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 48 }
+
+    jnxIcmpv6StatsOutRtrSolicits OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Router Solicitation messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 49 }
+
+    jnxIcmpv6StatsOutRtrAdvs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Router Advertisment messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 50 }
+
+    jnxIcmpv6StatsOutNbrSolicits OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Neighbor Solicitation messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 51 }
+
+    jnxIcmpv6StatsOutNbrAdvs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Neighbor Advertisement messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 52 }
+
+    jnxIcmpv6StatsOutRedirects OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Redirect messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 53 }
+
+    jnxIcmpv6StatsOutRtrRenumbers OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Router Renumber messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 54 }
+
+    jnxIcmpv6StatsOutNIReqs OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Node Information Request messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 55 }
+
+    jnxIcmpv6StatsOutNIReplies OBJECT-TYPE
+         SYNTAX      Counter64
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+            "The total number of Node Information Report messages transmitted."
+         ::= { jnxIcmpv6GlobalStats 56 }
+
+    jnxIpv6IfStatsTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxIpv6IfStatsEntry 
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The (conceptual) table containing 
+                 IPv6 statistics of an interface"
+        ::= { jnxIpv6IfStats 1 }
+
+    jnxIpv6IfStatsEntry OBJECT-TYPE
+        SYNTAX      JnxIpv6IfStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "An entry (conceptual row) containing 
+                 IPv6 statistics entry of an interface"
+        AUGMENTS      { ipv6IfEntry }
+        ::= { jnxIpv6IfStatsTable 1 }
+
+    JnxIpv6IfStatsEntry ::= SEQUENCE {
+            jnxIpv6IfInOctets   Counter64,
+            jnxIpv6IfOutOctets  Counter64
+        }
+
+    jnxIpv6IfInOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of octets received on the interface"
+        ::= { jnxIpv6IfStatsEntry 1 }
+
+    jnxIpv6IfOutOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of octets transmitted out of the
+                 interface"
+        ::= { jnxIpv6IfStatsEntry 2 }
+
+END

mibs/juniper/JUNIPER-IVE-MIB

@@ -0,0 +1,669 @@
+JUNIPER-IVE-MIB DEFINITIONS ::= BEGIN
+        IMPORTS 
+        	NOTIFICATION-TYPE, MODULE-IDENTITY, enterprises
+        		FROM SNMPv2-SMI
+        	NetworkAddress
+        		FROM RFC1155-SMI
+        	IpAddress
+        		FROM RFC1155-SMI;
+        
+juniper-ive MODULE-IDENTITY
+    LAST-UPDATED "201005180000Z"
+    ORGANIZATION "Juniper"
+    CONTACT-INFO    
+	 "Internet: https://www.juniper.net/cm/index.jsp"
+    DESCRIPTION
+	"This file defines the private Juniper Networks MIB extensions."
+    REVISION     "201002221000Z"
+    DESCRIPTION
+	"Initial Version"
+    ::= { enterprises 12532 }
+
+
+logFullPercent OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"Percentage of log file full"
+    ::= { juniper-ive 1 } 
+
+signedInWebUsers OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"Number of Signed-In Web Users"
+    ::= { juniper-ive 2 } 
+
+signedInMailUsers OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"Number of Signed-In Mail Users"
+    ::= { juniper-ive 3 } 
+
+blockedIP OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "IP Address that is blocked due to consecutive failed login attempts"
+    ::= { juniper-ive 4 }
+
+authServerName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Name of an external authentication server"
+    ::= { juniper-ive 5 }
+
+productName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "IVE Licensed Product Name"
+    ::= { juniper-ive 6 }
+
+productVersion OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "IVE System Software Version"
+    ::= { juniper-ive 7 }
+    
+fileName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "File name"
+    ::= { juniper-ive 8 }
+    
+meetingUserCount OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	accessible-for-notify
+    STATUS	current
+    DESCRIPTION  
+	"the number of concurrent meeting users"
+    ::= { juniper-ive 9 } 
+
+    
+iveCpuUtil OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The CPU Utilization of the IVE system"
+    ::= { juniper-ive 10 } 
+
+iveMemoryUtil OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Memory Utilization of the IVE system"
+    ::= { juniper-ive 11 } 
+
+iveConcurrentUsers OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of Users Logged In for the IVE Node"
+    ::= { juniper-ive 12 } 
+
+clusterConcurrentUsers OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of Users Logged In for the Cluster"
+    ::= { juniper-ive 13 } 
+
+iveTotalHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of hits to the IVE since last reboot"
+    ::= { juniper-ive 14 } 
+
+iveFileHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of File hits to the IVE since last reboot"
+    ::= { juniper-ive 15 } 
+
+iveWebHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of hits via the Web Interface since the last reboot"
+    ::= { juniper-ive 16 } 
+
+iveAppletHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of applet hits to the IVE  since last reboot"
+    ::= { juniper-ive 17 } 
+
+ivetermHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of terminal hits to the IVE since last reboot"
+    ::= { juniper-ive 18 } 
+
+iveSAMHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of SAM(Secure Application manager)hits of since last reboot"
+    ::= { juniper-ive 19 } 
+
+iveNCHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of NC(Network Connect) hits of since last reboot"
+    ::= { juniper-ive 20 } 
+
+meetingHits OBJECT-TYPE
+    SYNTAX      Counter64	
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Total number of Meeting hits of since last reboot"
+    ::= { juniper-ive 21 } 
+
+meetingCount OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	accessible-for-notify
+    STATUS	current
+    DESCRIPTION  
+	"the number of concurrent meetings"
+    ::= { juniper-ive 22 } 
+
+logName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Name of the log (admin/user/event)"
+    ::= { juniper-ive 23 }
+
+iveSwapUtil OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Swap Utilization of the IVE system"
+    ::= { juniper-ive 24 } 
+
+diskFullPercent OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"Percentage of disk space full"
+    ::= { juniper-ive 25 } 
+
+blockedIPList OBJECT-TYPE
+    SYNTAX	SEQUENCE OF IPEntry
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"Table of 10 most recently blocked IPs"
+    ::= { juniper-ive 26 } 
+
+ipEntry OBJECT-TYPE
+    SYNTAX      IPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry containing a blocked IP"
+    INDEX       { ipIndex }
+    ::= { blockedIPList 1 }
+
+IPEntry	::= SEQUENCE {
+    ipIndex	Integer32,
+    ipValue	NetworkAddress
+}
+
+ipIndex OBJECT-TYPE
+    SYNTAX      Integer32 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Index for IP Table"
+    ::= { ipEntry 1 }
+
+ipValue OBJECT-TYPE
+    SYNTAX      NetworkAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Blocked IP Entry"
+    ::= { ipEntry 2 }
+
+logID OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "The unique ID of the log message."
+    ::= { juniper-ive 27 }
+
+logType OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "String stating whether log message is major or critical."
+    ::= { juniper-ive 28 }
+
+logDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "The actual log message string."
+    ::= { juniper-ive 29 }
+
+ivsName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Virtual System name"
+    ::= { juniper-ive 30 }
+
+ocspResponderURL OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Name of an OCSP Responder"
+    ::= { juniper-ive 31 }
+ 
+fanDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "The status of the fans"
+    ::= { juniper-ive 32 }
+
+psDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "The status of the power supplies"
+    ::= { juniper-ive 33 }
+
+raidDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "The status of the RAID"
+    ::= { juniper-ive 34 }
+
+
+
+-- J&J traps
+
+clusterName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "Cluster Name"
+    ::= { juniper-ive 35 }
+
+
+nodeList OBJECT-TYPE
+    SYNTAX	OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS	current
+    DESCRIPTION  
+	"List of disabled nodes"
+    ::= { juniper-ive 36 } 
+
+
+vipType OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "Whether the VIP is external or internal"
+    ::= { juniper-ive 37 }
+
+currentVIP OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "Current value of VIP being changed"
+    ::= { juniper-ive 38 }
+
+newVIP OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+	    "New value for the VIp being changed"
+    ::= { juniper-ive 39 }
+
+
+nicEvent OBJECT-TYPE
+    SYNTAX	OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS	current
+    DESCRIPTION  
+	"Type of event that generated a the Trap: admin, external"
+    ::= { juniper-ive 40 } 
+
+nodeName OBJECT-TYPE
+    SYNTAX	OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS	current
+    DESCRIPTION  
+	"Node Name"
+    ::= { juniper-ive 41 } 
+
+iveTemperature OBJECT-TYPE
+    SYNTAX	Gauge32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION  
+	"The Temperature of MAG application blade. Other platform such as SA and IC will return 0"
+    ::= { juniper-ive 42 } 
+
+iveTraps OBJECT IDENTIFIER ::= { juniper-ive 251 }
+
+-- iveTraps.1 and iveTraps.2 are loaded incorrectly in HP OpenView 
+-- so avoid defining them
+    
+iveLogNearlyFull NOTIFICATION-TYPE
+    OBJECTS { logFullPercent, logName }
+    STATUS	current
+    DESCRIPTION
+	"Log file nearly full"
+    ::= { iveTraps 4 }
+
+iveLogFull NOTIFICATION-TYPE
+    OBJECTS { logName }
+    STATUS	current
+    DESCRIPTION
+	"Log file full"
+    ::= { iveTraps 5 }
+
+iveMaxConcurrentUsersSignedIn NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"Maximum number of concurrent users signed in"
+    ::= { iveTraps 6 }
+    
+iveTooManyFailedLoginAttempts NOTIFICATION-TYPE
+    OBJECTS { blockedIP }
+    STATUS	current
+    DESCRIPTION
+	"Too many failed login attempts"
+    ::= { iveTraps 7 }
+
+externalAuthServerUnreachable NOTIFICATION-TYPE
+    OBJECTS { authServerName }
+    STATUS	current
+    DESCRIPTION
+	"External authentication server is not responding"
+    ::= { iveTraps 8 }
+
+iveStart NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"IVE startup under administrator's instruction."
+    ::= { iveTraps 9 }
+
+iveShutdown NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"IVE shutdown under administrator's instruction."
+    ::= { iveTraps 10 }
+
+iveReboot NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"IVE reboot under administrator's instruction."
+    ::= { iveTraps 11 }
+    
+archiveServerUnreachable NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"Archive server is not responding"
+    ::= { iveTraps 12 }
+
+archiveServerLoginFailed NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"Could not login into archive server. Verify FTP username and password."
+    ::= { iveTraps 13 }
+    
+archiveFileTransferFailed NOTIFICATION-TYPE   
+    OBJECTS { fileName }
+    STATUS	current
+    DESCRIPTION
+	"Could not store file on archive server"
+    ::= { iveTraps 14 }
+    
+    
+meetingUserLimit NOTIFICATION-TYPE
+    OBJECTS { meetingUserCount }
+    STATUS	current
+    DESCRIPTION
+	"Concurrent user count over license limit"
+    ::= { iveTraps 15 }
+
+iveRestart NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"IVE has restarted under administrator's instruction."
+    ::= { iveTraps 16 }
+
+meetingLimit NOTIFICATION-TYPE
+    OBJECTS { meetingCount }
+    STATUS	current
+    DESCRIPTION
+	"Concurrent meeting count over license limit"
+    ::= { iveTraps 17 }
+
+iveDiskNearlyFull NOTIFICATION-TYPE
+    OBJECTS { diskFullPercent }
+    STATUS	current
+    DESCRIPTION
+	"Disk space nearly full"
+    ::= { iveTraps 18 }
+
+iveDiskFull NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	"Disk space full"
+    ::= { iveTraps 19 }
+
+logMessageTrap NOTIFICATION-TYPE
+    OBJECTS { logID, logType, logDescription }
+    STATUS  current
+	DESCRIPTION
+	    "The TRAP generated from a log message."
+    ::= { iveTraps 20 }
+
+memUtilNotify NOTIFICATION-TYPE
+    OBJECTS { iveMemoryUtil }
+    STATUS	current
+    DESCRIPTION
+	"IVE memory utilization above threshold"
+    ::= { iveTraps 21 }
+
+cpuUtilNotify NOTIFICATION-TYPE
+    OBJECTS { iveCpuUtil }
+    STATUS	current
+    DESCRIPTION
+	"IVE CPU utilization above threshold"
+    ::= { iveTraps 22 }
+
+swapUtilNotify NOTIFICATION-TYPE
+    OBJECTS { iveSwapUtil }
+    STATUS	current
+    DESCRIPTION
+	"IVE swap utilization above threshold"
+    ::= { iveTraps 23 }
+
+iveMaxConcurrentUsersVirtualSystem NOTIFICATION-TYPE
+    OBJECTS { ivsName }
+    STATUS	current
+    DESCRIPTION
+	"Maximum number of concurrent Virtual System users signed in"
+    ::= { iveTraps 24 }
+
+ocspResponderConnectionFailed NOTIFICATION-TYPE
+    OBJECTS { ocspResponderURL }
+    STATUS	current
+    DESCRIPTION
+	"OCSP Responder cannot be connected"
+    ::= { iveTraps 25 }
+
+iveFanNotify NOTIFICATION-TYPE
+    OBJECTS { fanDescription }
+    STATUS	current
+    DESCRIPTION
+	"The status of the fans has changed"
+    ::= { iveTraps 26 }
+    
+ivePowerSupplyNotify NOTIFICATION-TYPE
+    OBJECTS { psDescription }
+    STATUS	current
+    DESCRIPTION
+	"The status of the power supplies has changed"
+    ::= { iveTraps 27 }
+    
+iveRaidNotify NOTIFICATION-TYPE
+    OBJECTS { raidDescription }
+    STATUS	current
+    DESCRIPTION
+	"The status of the RAID has changed"
+    ::= { iveTraps 28 }
+
+iveClusterDisableNodeTrap NOTIFICATION-TYPE
+    OBJECTS { clusterName, nodeList }
+    STATUS	current
+    DESCRIPTION
+	"A Given node(s) in a cluster has(have) been disabled"
+    ::= { iveTraps 29 }
+
+iveClusterChangedVIPTrap NOTIFICATION-TYPE
+    OBJECTS { vipType, currentVIP, newVIP }
+    STATUS	current
+    DESCRIPTION
+	"A external/internal VIP has changed from its current value to a new one"
+    ::= { iveTraps 30 }
+
+iveNetExternalInterfaceDownTrap NOTIFICATION-TYPE
+    OBJECTS { nicEvent }
+    STATUS	current
+    DESCRIPTION
+	"The External interface has gone down, reason is in nicEvent"
+    ::= { iveTraps 31 }
+
+iveClusterDeleteTrap NOTIFICATION-TYPE
+    OBJECTS { nodeName }
+    STATUS	current
+    DESCRIPTION
+	"Cluster delete inititaed by nodeName"
+    ::= { iveTraps 32 }
+
+iveNetInternalInterfaceDownTrap NOTIFICATION-TYPE
+    OBJECTS { nicEvent }
+    STATUS	current
+    DESCRIPTION
+	"The Internal interface has gone down, reason is in nicEvent"
+    ::= { iveTraps 33 }
+
+iveNetManagementInterfaceDownTrap NOTIFICATION-TYPE
+    OBJECTS { nicEvent }
+    STATUS	current
+    DESCRIPTION
+	"The Management interface has gone down, reason is in nicEvent"
+    ::= { iveTraps 34 }
+
+iveTemperatureNotify NOTIFICATION-TYPE
+    OBJECTS { iveTemperature }
+    STATUS	current
+    DESCRIPTION
+	"IVE Temperature is above threshold"
+    ::= { iveTraps 35 }
+
+-- Product Name
+iveSAProduct OBJECT IDENTIFIER ::= { juniper-ive 252 }
+iveICProduct OBJECT IDENTIFIER ::= { juniper-ive 253 }
+iveMAGProduct OBJECT IDENTIFIER ::= { juniper-ive 254 }
+
+iveProductSA700   OBJECT IDENTIFIER ::= {iveSAProduct 1}
+iveProductSA2000  OBJECT IDENTIFIER ::= {iveSAProduct 2 }
+iveProductSA2500  OBJECT IDENTIFIER ::= {iveSAProduct 3 }
+iveProductSA4000  OBJECT IDENTIFIER ::= {iveSAProduct 4 }
+iveProductSA4500  OBJECT IDENTIFIER ::= {iveSAProduct 5 }
+iveProductSA6000 OBJECT IDENTIFIER ::= {iveSAProduct 6 }
+iveProductSA6500 OBJECT IDENTIFIER ::= {iveSAProduct 7 }
+
+iveProductIC4000  OBJECT IDENTIFIER ::= {iveICProduct 1 }
+iveProductIC4500  OBJECT IDENTIFIER ::= {iveICProduct 2 }
+iveProductIC6000 OBJECT IDENTIFIER ::= {iveICProduct 3 }
+iveProductIC6500 OBJECT IDENTIFIER ::= {iveICProduct 4 }
+
+--MAG platform
+iveProductMAG2600  OBJECT IDENTIFIER ::= {iveMAGProduct 1 }
+iveProductMAG4610  OBJECT IDENTIFIER ::= {iveMAGProduct 2 }
+iveProductSM160  OBJECT IDENTIFIER ::= {iveMAGProduct 3 }
+iveProductSM360 OBJECT IDENTIFIER ::= {iveMAGProduct 4 }
+
+--SA 
+iveSA700   OBJECT IDENTIFIER ::= {iveProductSA700 1}
+iveSA2000   OBJECT IDENTIFIER ::= {iveProductSA2000 1}
+iveSA2500   OBJECT IDENTIFIER ::= {iveProductSA2500 1}
+iveSA4000   OBJECT IDENTIFIER ::= {iveProductSA4000 1}
+iveSA4500   OBJECT IDENTIFIER ::= {iveProductSA4500 1}
+iveSA4000FIPS  OBJECT IDENTIFIER ::= {iveProductSA4000 2}
+iveSA4500FIPS   OBJECT IDENTIFIER ::= {iveProductSA4500 2}
+iveSA6000   OBJECT IDENTIFIER ::= {iveProductSA6000 1}
+iveSA6500   OBJECT IDENTIFIER ::= {iveProductSA6500 1}
+iveSA6000FIPS  OBJECT IDENTIFIER ::= {iveProductSA6000 2}
+iveSA6500FIPS   OBJECT IDENTIFIER ::= {iveProductSA6500 2}
+
+--IC
+iveIC4000   OBJECT IDENTIFIER ::= {iveProductIC4000 1}
+iveIC6000   OBJECT IDENTIFIER ::= {iveProductIC6000 1}
+iveIC4500   OBJECT IDENTIFIER ::= {iveProductIC4500 1}
+iveIC6500   OBJECT IDENTIFIER ::= {iveProductIC6500 1}
+iveIC6000FIPS  OBJECT IDENTIFIER ::=  {iveProductIC6000 2}
+
+--MAG platform incase we have other rev
+iveMAG2600  OBJECT IDENTIFIER ::= {iveProductMAG2600 1}
+iveMAG4610  OBJECT IDENTIFIER ::= {iveProductMAG4610 1}
+iveMAGSM160   OBJECT IDENTIFIER ::= {iveProductSM160 1}
+iveMAGSM360   OBJECT IDENTIFIER ::= {iveProductSM360 1}
+
+END

mibs/juniper/JUNIPER-JDHCPV6-MIB

@@ -0,0 +1,757 @@
+-- *******************************************************************
+-- Juniper enterprise specific DHCPv6 MIB.
+--
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+JUNIPER-JDHCPV6-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, IpAddress, 
+    Counter32, NOTIFICATION-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    ifIndex,InterfaceIndex
+        FROM IF-MIB
+    TEXTUAL-CONVENTION, DisplayString, DateAndTime
+        FROM SNMPv2-TC 
+     Ipv6Address, Ipv6AddressPrefix
+        FROM IPV6-TC
+    jnxJdhcpv6MibRoot
+        FROM JUNIPER-SMI;
+
+jnxJdhcpv6MIB  MODULE-IDENTITY
+    LAST-UPDATED "201103150000Z" --  March 15, 2011
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+        "The JUNOS DHCP MIB for the Juniper Networks enterprise."
+
+    -- revision history
+    REVISION      "201103150000Z"
+    DESCRIPTION   "Add OIDs to the Interface Statistics Table"
+    REVISION      "201101250000Z"
+    DESCRIPTION   "Add Interface Statistics Table"
+    REVISION      "201002150000Z"
+    DESCRIPTION   "Creation Date"
+    ::= { jnxJdhcpv6MibRoot 62 }
+
+-- Managed object groups
+jnxJdhcpv6Objects                         OBJECT IDENTIFIER ::= { jnxJdhcpv6MIB 1 }
+jnxJdhcpv6LocalServerObjects              OBJECT IDENTIFIER ::= { jnxJdhcpv6MIB 2 }
+
+
+-- Managed objects for DHCPv6 local server
+jnxJdhcpv6LocalServerStatistics OBJECT IDENTIFIER
+    ::= { jnxJdhcpv6LocalServerObjects 1 }
+jnxJdhcpv6LocalServerBindings   OBJECT IDENTIFIER
+    ::= { jnxJdhcpv6LocalServerObjects 2 }
+jnxJdhcpv6LocalServerTraps    OBJECT IDENTIFIER
+    ::= { jnxJdhcpv6LocalServerObjects 3 }
+jnxJdhcpv6LocalServerTrapVars   OBJECT IDENTIFIER 
+    ::= { jnxJdhcpv6LocalServerObjects 4 }
+jnxJdhcpv6LocalServerIfcStats   OBJECT IDENTIFIER
+    ::= { jnxJdhcpv6LocalServerObjects 5 }
+
+-- DHCP V6 Server Statistics
+jnxJdhcpv6LocalServerTotalDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total DHCP v6 packets dropped." 
+    ::= { jnxJdhcpv6LocalServerStatistics 1 }
+
+jnxJdhcpv6LocalServerNoSafdDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to no safd match."
+    ::= { jnxJdhcpv6LocalServerStatistics 2 }
+
+jnxJdhcpv6LocalServerBadSendDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to send error."
+    ::= { jnxJdhcpv6LocalServerStatistics 3 }
+
+jnxJdhcpv6LocalServerShortPacketDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to packet being too short."
+    ::= { jnxJdhcpv6LocalServerStatistics 4 }
+
+jnxJdhcpv6LocalServerBadMsgtypeDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to bad opcode in the packet."
+    ::= { jnxJdhcpv6LocalServerStatistics 5 }
+
+jnxJdhcpv6LocalServerBadOptionsDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to bad options in the packet."
+    ::= { jnxJdhcpv6LocalServerStatistics 6 }
+
+jnxJdhcpv6LocalServerBadSrcAddressDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to invalid addr family."
+    ::= { jnxJdhcpv6LocalServerStatistics 7 }
+
+jnxJdhcpv6LocalServerRelayHopCountDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to max relays supported."
+    ::= { jnxJdhcpv6LocalServerStatistics 8 }
+
+jnxJdhcpv6LocalServerNoClientIdDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to missing client id."
+    ::= { jnxJdhcpv6LocalServerStatistics 9 }
+
+jnxJdhcpv6LocalServerDeclineReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Decline packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 10}
+
+jnxJdhcpv6LocalServerSolicitReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Solicit packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 11}
+
+jnxJdhcpv6LocalServerInformationRequestReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Information Request packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 12 }
+
+jnxJdhcpv6LocalServerReleaseReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Release packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 13 }
+
+jnxJdhcpv6LocalServerRequestReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Request packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 14 }
+
+jnxJdhcpv6LocalServerConfirmReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Confirm packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 15 }
+
+jnxJdhcpv6LocalServerRenewReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Renew packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 16 }
+
+jnxJdhcpv6LocalServerRebindReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Rebind packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 17 }
+
+jnxJdhcpv6LocalServerRelayForwReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Relay Fowr packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 18 }
+
+jnxJdhcpv6LocalServerRelayReplReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Relay Repl packets received."
+    ::= { jnxJdhcpv6LocalServerStatistics 19 }
+
+jnxJdhcpv6LocalServerAdvertiseSent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Advertise packets sent."
+    ::= { jnxJdhcpv6LocalServerStatistics 20 }
+
+jnxJdhcpv6LocalServerReplySent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Reply packets sent."
+    ::= { jnxJdhcpv6LocalServerStatistics 21 }
+
+jnxJdhcpv6LocalServerReconfigureSent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Reconfigure packets sent."
+    ::= { jnxJdhcpv6LocalServerStatistics 22 }
+
+jnxJdhcpv6LocalServerTotalLeaseCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Bound DHCP Clients."
+    ::= { jnxJdhcpv6LocalServerStatistics 23}
+
+-- DHCPv6 Local Server Bindings Table
+
+jnxJdhcpv6LocalServerBindingsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJdhcpv6LocalServerBindingsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of address bindings maintained by this JUNOS DHCP Local Server."
+    ::= { jnxJdhcpv6LocalServerBindings 1 }
+
+jnxJdhcpv6LocalServerBindingsEntry OBJECT-TYPE
+    SYNTAX      JnxJdhcpv6LocalServerBindingsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry (conceptual row) representing an address binding (client) maintained by
+        this JUNOS DHCP Local Server."
+    INDEX     { jnxJdhcpv6LocalServerBindingsPrefix, jnxJdhcpv6LocalServerBindingsLength }
+    ::= { jnxJdhcpv6LocalServerBindingsTable 1 }
+
+JnxJdhcpv6LocalServerBindingsEntry ::= SEQUENCE {
+    jnxJdhcpv6LocalServerBindingsPrefix                       Ipv6AddressPrefix,
+    jnxJdhcpv6LocalServerBindingsLength                       Unsigned32,
+    jnxJdhcpv6LocalServerBindingsState                        DisplayString,
+    jnxJdhcpv6LocalServerBindingsLeaseEndTime                 DateAndTime,
+    jnxJdhcpv6LocalServerBindingsLeaseExpireTime              Unsigned32,
+    jnxJdhcpv6LocalServerBindingsLeaseStartTime               DateAndTime,
+    jnxJdhcpv6LocalServerBindingsIncomingClientInterface      DisplayString,
+    jnxJdhcpv6LocalServerBindingsClientInterfaceVlanId        Unsigned32,
+    jnxJdhcpv6LocalServerBindingsDemuxInterfaceName           DisplayString,
+    jnxJdhcpv6LocalServerBindingsServerIpAddress              IpAddress,
+    jnxJdhcpv6LocalServerBindingsBootpRelayAddress            IpAddress,
+    jnxJdhcpv6LocalServerBindingsPreviousBootpRelayAddress    IpAddress,
+    jnxJdhcpv6LocalServerBindingsClientPoolName               DisplayString,
+    jnxJdhcpv6LocalServerBindingsClientProfileName            DisplayString
+    }
+
+jnxJdhcpv6LocalServerBindingsPrefix OBJECT-TYPE
+    SYNTAX      Ipv6AddressPrefix
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The prefix associated with this entry in the bindings table."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 1 }
+
+jnxJdhcpv6LocalServerBindingsLength OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The length of the prefix in bits."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 2 }
+
+jnxJdhcpv6LocalServerBindingsState OBJECT-TYPE
+    SYNTAX       DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state associated with this entry in the bindings table."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 3 }
+
+jnxJdhcpv6LocalServerBindingsLeaseEndTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The time the lease expires on this binding."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 4 }
+
+jnxJdhcpv6LocalServerBindingsLeaseExpireTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The time remaining until the lease expires for this binding."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 5 }
+
+jnxJdhcpv6LocalServerBindingsLeaseStartTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The time the lease was started for this binding."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 6 }
+
+jnxJdhcpv6LocalServerBindingsIncomingClientInterface OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The incoming interface or this binding."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 7 }
+
+jnxJdhcpv6LocalServerBindingsClientInterfaceVlanId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The VLAN ID for this binding."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 8 }
+
+jnxJdhcpv6LocalServerBindingsDemuxInterfaceName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The demux interface for this binding."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 9 }
+
+jnxJdhcpv6LocalServerBindingsServerIpAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP Address associated with the server for this entry in the bindings table."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 10 }
+
+jnxJdhcpv6LocalServerBindingsBootpRelayAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The BOOTP relay Address associated with the server for this entry in the bindings table."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 11 }
+
+jnxJdhcpv6LocalServerBindingsPreviousBootpRelayAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Previous BOOTP relay Address associated with the server for this entry in the bindings table."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 12 }
+
+jnxJdhcpv6LocalServerBindingsClientPoolName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The display client pool name."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 13 }
+
+jnxJdhcpv6LocalServerBindingsClientProfileName  OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The display client profile name."
+    ::= { jnxJdhcpv6LocalServerBindingsEntry 14 }
+
+-- DHCP V6 Local Server Interface Statistics Table
+
+jnxJdhcpv6LocalServerIfcStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJdhcpv6LocalServerIfcStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of interface statistics maintained by this JUNOS DHCPv6 Local Server."
+    ::= { jnxJdhcpv6LocalServerIfcStats 1 }
+
+jnxJdhcpv6LocalServerIfcStatsEntry OBJECT-TYPE
+    SYNTAX      JnxJdhcpv6LocalServerIfcStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry (conceptual row) representing an address binding (client) maintained by
+        this JUNOS DHCPv6 Local Server."
+    INDEX     { jnxJdhcpv6LocalServerIfcStatsIfIndex }
+    ::= { jnxJdhcpv6LocalServerIfcStatsTable 1 }
+
+JnxJdhcpv6LocalServerIfcStatsEntry ::= SEQUENCE {
+    jnxJdhcpv6LocalServerIfcStatsIfIndex                    InterfaceIndex,
+    jnxJdhcpv6LocalServerIfcStatsTotalDropped               Counter32,
+    jnxJdhcpv6LocalServerIfcStatsNoSafdDropped              Counter32,
+    jnxJdhcpv6LocalServerIfcStatsBadSendDropped             Counter32,
+    jnxJdhcpv6LocalServerIfcStatsShortPacketDropped         Counter32,
+    jnxJdhcpv6LocalServerIfcStatsBadMsgtypeDropped          Counter32,
+    jnxJdhcpv6LocalServerIfcStatsBadOptionsDropped          Counter32,
+    jnxJdhcpv6LocalServerIfcStatsBadSrcAddressDropped       Counter32,
+    jnxJdhcpv6LocalServerIfcStatsRelayCountDropped          Counter32,
+    jnxJdhcpv6LocalServerIfcStatsNoClientIdDropped          Counter32,
+    jnxJdhcpv6LocalServerIfcStatsDeclineReceived            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsSolicitReceived            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsInformationRequestReceived Counter32,
+    jnxJdhcpv6LocalServerIfcStatsReleaseReceived            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsRequestReceived            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsConfirmReceived            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsRenewReceived              Counter32,
+    jnxJdhcpv6LocalServerIfcStatsRebindReceived             Counter32,
+    jnxJdhcpv6LocalServerIfcStatsRelayForwReceived          Counter32,
+    jnxJdhcpv6LocalServerIfcStatsRelayReplReceived          Counter32,
+    jnxJdhcpv6LocalServerIfcStatsAdvertiseSent              Counter32,
+    jnxJdhcpv6LocalServerIfcStatsReplySent                  Counter32,
+    jnxJdhcpv6LocalServerIfcStatsReconfigureSent            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsTotalLeaseCount            Counter32,
+    jnxJdhcpv6LocalServerIfcStatsStrictReconfigDropped      Counter32,
+    jnxJdhcpv6LocalServerIfcStatsAuthenticationDropped      Counter32,
+    jnxJdhcpv6LocalServerIfcStatsDynamicProfileDropped      Counter32,
+    jnxJdhcpv6LocalServerIfcStatsLicenseDropped             Counter32
+    }
+
+-- According to IF-MIB.txt and interface index is an Integer 32 (1 - 2147483647) 
+-- This will correlate with an IFL in DHCP
+
+jnxJdhcpv6LocalServerIfcStatsIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for which this entry
+            contains information."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 1}
+
+jnxJdhcpv6LocalServerIfcStatsTotalDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total DHCP v6 packets dropped." 
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 2}
+
+jnxJdhcpv6LocalServerIfcStatsNoSafdDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to no safd match."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 3}
+
+jnxJdhcpv6LocalServerIfcStatsBadSendDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to send error."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 4}
+
+jnxJdhcpv6LocalServerIfcStatsShortPacketDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to packet being too short."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 5}
+
+jnxJdhcpv6LocalServerIfcStatsBadMsgtypeDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to bad opcode in the packet."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 6}
+
+jnxJdhcpv6LocalServerIfcStatsBadOptionsDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to bad options in the packet."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 7}
+
+jnxJdhcpv6LocalServerIfcStatsBadSrcAddressDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to invalid addr family."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 8}
+
+jnxJdhcpv6LocalServerIfcStatsRelayCountDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to max relays supported."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 9}
+
+jnxJdhcpv6LocalServerIfcStatsNoClientIdDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "DHCPv6 packets dropped due to missing client id."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 10}
+
+jnxJdhcpv6LocalServerIfcStatsDeclineReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Decline packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 11}
+
+jnxJdhcpv6LocalServerIfcStatsSolicitReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Solicit packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 12}
+
+jnxJdhcpv6LocalServerIfcStatsInformationRequestReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Information Request packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 13}
+
+jnxJdhcpv6LocalServerIfcStatsReleaseReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Release packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 14}
+
+jnxJdhcpv6LocalServerIfcStatsRequestReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Request packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 15}
+
+jnxJdhcpv6LocalServerIfcStatsConfirmReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Confirm packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 16}
+
+jnxJdhcpv6LocalServerIfcStatsRenewReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Renew packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 17}
+
+jnxJdhcpv6LocalServerIfcStatsRebindReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Rebind packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 18}
+
+jnxJdhcpv6LocalServerIfcStatsRelayForwReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Relay Fowr packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 19}
+
+jnxJdhcpv6LocalServerIfcStatsRelayReplReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Relay Repl packets received."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 20}
+
+jnxJdhcpv6LocalServerIfcStatsAdvertiseSent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Advertise packets sent."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 21}
+
+jnxJdhcpv6LocalServerIfcStatsReplySent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Reply packets sent."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 22}
+
+jnxJdhcpv6LocalServerIfcStatsReconfigureSent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of DHCPv6 Reconfigure packets sent."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 23}
+
+jnxJdhcpv6LocalServerIfcStatsTotalLeaseCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Bound DHCP Clients."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 24}
+
+jnxJdhcpv6LocalServerIfcStatsStrictReconfigDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets dropped due to strict reconfigure."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 25}
+
+jnxJdhcpv6LocalServerIfcStatsAuthenticationDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets dropped due to authentication failure."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 26}
+
+jnxJdhcpv6LocalServerIfcStatsDynamicProfileDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets dropped due to dynamic profile error."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 27}
+
+jnxJdhcpv6LocalServerIfcStatsLicenseDropped OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets dropped due to license error."
+    ::= { jnxJdhcpv6LocalServerIfcStatsEntry 28}
+
+-- Objects used for traps
+
+jnxJdhcpv6RouterName OBJECT-TYPE
+    SYNTAX      DisplayString 
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The VRF ID in JUNOS. Represented as the Logical Router (LR)
+         Name followed by the Router Instance (RI) Name."
+    ::= { jnxJdhcpv6LocalServerTrapVars 1 }
+
+jnxJdhcpv6LocalServerInterfaceName  OBJECT-TYPE
+    SYNTAX       DisplayString
+    MAX-ACCESS   accessible-for-notify
+    STATUS       current
+    DESCRIPTION
+        "The interface where the DHCP client was detected"
+    ::= { jnxJdhcpv6LocalServerTrapVars 2 }
+
+jnxJdhcpv6LocalServerInterfaceLimit  OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   accessible-for-notify
+    STATUS       current
+    DESCRIPTION
+        "The number of clients supported on this interface."
+    ::= { jnxJdhcpv6LocalServerTrapVars 3 }
+
+jnxJdhcpv6LocalServerEventSeverity OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    debug(0),
+                    warning(1),
+                    critical(2)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The level of error. "
+    ::= { jnxJdhcpv6LocalServerTrapVars 4 }
+
+jnxJdhcpv6LocalServerEventString  OBJECT-TYPE
+    SYNTAX       DisplayString
+    MAX-ACCESS   accessible-for-notify
+    STATUS       current
+    DESCRIPTION
+        "The text of the event string associated with the health event."
+    ::= { jnxJdhcpv6LocalServerTrapVars 5 }
+
+-- Notifications
+
+jnxJdhcpv6LocalServerInterfaceLimitExceeded  NOTIFICATION-TYPE
+    OBJECTS {
+        jnxJdhcpv6RouterName,
+        jnxJdhcpv6LocalServerInterfaceName,
+        jnxJdhcpv6LocalServerInterfaceLimit }
+    STATUS      current
+    DESCRIPTION
+        "Reports when the limit of clients has been exceeded on an interface."
+    ::= { jnxJdhcpv6LocalServerTraps 1 }
+
+jnxJdhcpv6LocalServerInterfaceLimitAbated  NOTIFICATION-TYPE
+    OBJECTS {
+        jnxJdhcpv6RouterName,
+        jnxJdhcpv6LocalServerInterfaceName,
+        jnxJdhcpv6LocalServerInterfaceLimit }
+    STATUS      current
+    DESCRIPTION
+        "Reports when the number of clients on an interface has fallen
+        below the limit allowed on that interface."
+    ::= { jnxJdhcpv6LocalServerTraps 2 }
+
+jnxJdhcpv6LocalServerHealth NOTIFICATION-TYPE
+    OBJECTS {
+        jnxJdhcpv6RouterName,
+        jnxJdhcpv6LocalServerEventSeverity,
+        jnxJdhcpv6LocalServerEventString }
+    STATUS      current
+    DESCRIPTION
+        "Reports when a health event occurs in the V6 Local Server 
+         application."
+    ::= { jnxJdhcpv6LocalServerTraps 4 }
+
+END

mibs/juniper/JUNIPER-JS-AUTH-MIB

@@ -0,0 +1,195 @@
+-- *******************************************************************
+-- Juniper enterprise specific Access Authentication objects MIB.
+--
+-- Copyright (c) 2001-2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+    JUNIPER-JS-AUTH-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        Counter64, IpAddress, Integer32,
+        NOTIFICATION-TYPE, MODULE-IDENTITY, 
+        OBJECT-TYPE	
+            FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION, DisplayString
+            FROM SNMPv2-TC 
+
+        jnxJsAuth 
+            FROM JUNIPER-JS-SMI;
+
+
+    jnxJsAuthMIB  MODULE-IDENTITY
+        LAST-UPDATED  "200705142022Z"
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "Firewall and security features restrict the accessing of protected 
+             resources (ideally on different zones) behind a firewall based 
+             on their source ip and other credentials.
+
+             This module defines the objects pertain to access authentication."
+    	REVISION      "200705140000Z"
+    	DESCRIPTION   "Creation Date"
+    	::= { jnxJsAuth 1 }   
+
+
+    jnxJsAuthNotifications OBJECT IDENTIFIER ::= { jnxJsAuthMIB 0 }
+    jnxJsAuthObjects       OBJECT IDENTIFIER ::= { jnxJsAuthMIB 1 }
+
+
+    -- ***************************************************************
+    --  Next Branch node. 
+    -- ***************************************************************
+
+    jnxJsFwAuthStats       OBJECT IDENTIFIER ::= { jnxJsAuthObjects 1 }
+    jnxJsAuthTrapVars      OBJECT IDENTIFIER ::= { jnxJsAuthObjects 2 }
+
+
+    -- ***************************************************************
+    -- Firewall Authentication Statistics 
+    -- ***************************************************************
+
+    jnxJsFwAuthNumPendingUsers  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+             "Number of users currently waiting to be authenticated by 
+              the firewall user authentication mechanism."
+        ::= { jnxJsFwAuthStats 1 }
+	
+    jnxJsFwAuthNumSuccUsers OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of users currently allowed access by the firewall 
+             user authentication mechanism."
+        ::= { jnxJsFwAuthStats 2 }
+	
+    jnxJsFwAuthNumFailedUsers OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of users currently failed to be authenticated by 
+             the firewall user authentication mechanism."
+        ::= { jnxJsFwAuthStats 3 }
+	
+    jnxJsFwAuthTotalUsers OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Total number of users that are accessing or attempting 
+             to access resources managed by the firewall user 
+             authentication mechanism."
+        ::= { jnxJsFwAuthStats 4 }
+	
+
+	-- ********************************************************************
+	-- Objects used for the FW authentication traps 
+	-- ********************************************************************
+
+	jnxJsFwAuthUserName OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The name of the user who is attempting or has been authenticated."
+        ::= { jnxJsAuthTrapVars 1 }	
+
+	jnxJsFwAuthServiceDesc OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The service or application name that the enthentication 
+             is performed for: telnet, ftp, http."
+        ::= { jnxJsAuthTrapVars 2 }	
+
+	jnxJsFwAuthReason OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The reason for the trap being generated: authentication 
+             failure due to: timeout, invalid password, invalid username, etc."
+        ::= { jnxJsAuthTrapVars 3 }	
+
+	jnxJsFwAuthClientIpAddr OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The authentication client's IP Address."
+        ::= { jnxJsAuthTrapVars 4 }	
+
+    -- ***************************************************************
+	-- definition of Firewall user authentication related traps.
+    -- ***************************************************************
+	
+	--
+	-- Firewall User Authentication failed. 
+	-- 
+	jnxJsFwAuthFailure	NOTIFICATION-TYPE
+        OBJECTS         { jnxJsFwAuthUserName, 
+						  jnxJsFwAuthClientIpAddr,
+						  jnxJsFwAuthServiceDesc,
+						  jnxJsFwAuthReason }
+        STATUS          current
+        DESCRIPTION
+            "A firewall user authentication status trap signifies whether a user
+             using the pass-through firewall authentication mechanism 
+             has been rejected due to reason specified in the trap. 
+
+             jnxJsFwAuthUserName is the user.
+             jnxClientIPAddress is the ip address the user came from.
+             jnxJsFwAuthServiceDesc specifies the application by 
+             which the authentication was performed. 
+             jnxJsFwAuthReason indicates the reason for failure."
+        ::= { jnxJsAuthNotifications 1 }
+
+	--
+	-- Firewall user authentication Service is up 
+	-- 
+	jnxJsFwAuthServiceUp NOTIFICATION-TYPE
+        STATUS          current
+        DESCRIPTION
+            "Firewall user authentication service has started."
+        ::= { jnxJsAuthNotifications 2 }
+
+	--
+	-- Firewall user authentication Service is up 
+	-- 
+	jnxJsFwAuthServiceDown NOTIFICATION-TYPE
+        STATUS          current
+        DESCRIPTION
+            "Firewall user authentication service has stopped."
+        ::= { jnxJsAuthNotifications 3 }
+
+	--
+	-- Firewall user authentication maximum capacity exceeded.
+	-- 
+	jnxJsFwAuthCapacityExceeded 	NOTIFICATION-TYPE
+        STATUS          current
+        DESCRIPTION
+            "Firewall user authentication maximum capacity has been exceeded. 
+
+             jnxJsFwAuthTotalUsers indicates the total number of users 
+             being authenticated.  And it has exceeds the maximum allowable
+             users. "
+        ::= { jnxJsAuthNotifications 4 }
+
+END

mibs/juniper/JUNIPER-JS-CERT-MIB

@@ -0,0 +1,233 @@
+-- *******************************************************************
+-- Juniper enterprise VPN Certificat objects MIB.
+--
+-- Copyright (c) 2001-2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+        JUNIPER-JS-CERT-MIB DEFINITIONS ::= BEGIN
+
+        IMPORTS
+
+        MODULE-IDENTITY, OBJECT-TYPE        FROM SNMPv2-SMI
+        DateAndTime, DisplayString          FROM SNMPv2-TC 
+        jnxJsCertificates                   FROM JUNIPER-JS-SMI;
+
+
+        jnxJsCertificateMIB MODULE-IDENTITY
+        LAST-UPDATED  "200704200000Z" -- April 20, 2007
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+                "Juniper Technical Assistance Center
+                 Juniper Networks, Inc.
+                 1133 Innovation Way
+                 Sunnyvale, CA 94089
+                 E-mail: support@juniper.net
+                 HTTP://www.juniper.net"
+        DESCRIPTION
+               "This module defines the object that are used to monitor
+                reference and attributes to the certificates."
+
+        REVISION        "200704200000Z" -- April 20, 2007
+        DESCRIPTION     "The MIB has been revised to make the index
+                         in the tables jnxJsLoadedLocalCertTable and
+                         jnxJsLoadedCaCertTable as IMPLIED"
+
+    ::= { jnxJsCertificates 1 }   
+
+
+
+    jnxJsCertificateObjects OBJECT IDENTIFIER ::= { jnxJsCertificateMIB 1 }
+	jnxJsCertificateNotifications OBJECT IDENTIFIER ::= { jnxJsCertificateMIB 2 }
+
+    -- ***************************************************************
+    --  Loaded CA Certification Table
+    -- ***************************************************************
+
+    jnxJsLoadedCaCertTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsLoadedCaCertEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "This table exposes the loaded Certification Authority (CA) 
+             issued certificates. Certificates are used when establishing
+             a secure connection in the device."
+    	::= { jnxJsCertificateObjects 1 }
+
+    jnxJsLoadedCaCertEntry OBJECT-TYPE
+        SYNTAX        JnxJsLoadedCaCertEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "The loaded CA certificate entry.  It is indexed by the 
+             CA certification name."
+        INDEX   { IMPLIED jnxJsLoadedCaCertName }
+        ::= { jnxJsLoadedCaCertTable 1 }
+
+    JnxJsLoadedCaCertEntry ::= SEQUENCE
+    {
+        jnxJsLoadedCaCertName                           DisplayString,
+        jnxJsLoadedCaCertSubject                        DisplayString,
+        jnxJsLoadedCaCertExpire                         DateAndTime,
+        jnxJsLoadedCaCertIssuer                         DisplayString	
+    }
+
+    jnxJsLoadedCaCertName OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(1..255))
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+            "The loaded CA certificate name.  This is unique within the 
+             the loaded CA certifcates."
+        ::= { jnxJsLoadedCaCertEntry 1 }
+
+    jnxJsLoadedCaCertSubject OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(0..255))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The CA certificate subject."
+        ::= { jnxJsLoadedCaCertEntry 2 }
+
+    jnxJsLoadedCaCertExpire OBJECT-TYPE
+        SYNTAX          DateAndTime
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The expiration time and date of the CA certificate."
+        ::= { jnxJsLoadedCaCertEntry 3 }
+
+
+    jnxJsLoadedCaCertIssuer OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(0..255))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The issuer of the CA certificate."
+        ::= { jnxJsLoadedCaCertEntry 4 }
+
+
+    -- ***************************************************************
+	-- Local loaded Certificate table 
+    -- ***************************************************************
+
+    jnxJsLoadedLocalCertTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsLoadedLocalCertEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "This table exposes the loaded certificates. 
+             Certificates are used when establishing a secure 
+             connection in the device."
+        ::= { jnxJsCertificateObjects 2 }
+
+    jnxJsLoadedLocalCertEntry OBJECT-TYPE
+        SYNTAX        JnxJsLoadedLocalCertEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Default certificate entry.  It is indexed by the 
+             certification name."
+        INDEX   {IMPLIED jnxJsLoadedLocalCertName }
+        ::= { jnxJsLoadedLocalCertTable 1 }
+
+    JnxJsLoadedLocalCertEntry ::= SEQUENCE
+    {
+        jnxJsLoadedLocalCertName               DisplayString,
+        jnxJsLoadedLocalCertSubject            DisplayString,
+        jnxJsLoadedLocalCertExpire             DateAndTime,
+        jnxJsLoadedLocalCertIssuer             DisplayString
+    }
+
+    jnxJsLoadedLocalCertName OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(1..255))
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+            "The name of the local certificate. 
+             The certificate name is unique within the loaded local 
+             certificates. "
+        ::= { jnxJsLoadedLocalCertEntry 1 }
+
+    jnxJsLoadedLocalCertSubject OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(0..255))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The certificate subject."
+        ::= { jnxJsLoadedLocalCertEntry 2 }
+
+    jnxJsLoadedLocalCertExpire OBJECT-TYPE
+        SYNTAX          DateAndTime
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The expiration time and date of the local certificate."
+        ::= { jnxJsLoadedLocalCertEntry 3 }
+
+    jnxJsLoadedLocalCertIssuer OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(0..255))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The issuer of the local certificate."
+        ::= { jnxJsLoadedLocalCertEntry 4 }
+
+	-- ***************************************************************
+	-- Notifications
+	-- ***************************************************************
+
+	jnxJsCertNotificationType OBJECT IDENTIFIER
+		::= { jnxJsCertificateNotifications 1 }
+
+	jnxJsCertNotificationObj OBJECT IDENTIFIER
+		::= { jnxJsCertificateNotifications 2 }
+
+	-- ***************************************************************
+	-- Notifications - Variables
+	-- ***************************************************************
+
+	jnxJsCertName OBJECT-TYPE
+		SYNTAX          DisplayString
+		MAX-ACCESS      read-only
+		STATUS          current
+		DESCRIPTION
+			"Cert-id of the local or CA certificate."
+		::= { jnxJsCertNotificationObj 1 }
+
+	jnxJsCertExpireTime OBJECT-TYPE
+		SYNTAX          DateAndTime
+		MAX-ACCESS      read-only
+		STATUS          current
+		DESCRIPTION
+			"The expiration time and date of the local certificate or CA."
+		::= { jnxJsCertNotificationObj 2 }
+
+	-- ***************************************************************
+	-- Notifications - Traps
+	-- ***************************************************************
+
+	jnxJsCertExpiring NOTIFICATION-TYPE
+		OBJECTS         {
+							jnxJsCertName,
+							jnxJsCertExpireTime
+						}
+		STATUS          current
+		DESCRIPTION
+			"To provide notification for the event when CA or local certificate
+			 is about to expire. By default the notification will be sent 60
+			 days before the certificate expiration time. If the trap number of
+			 days before expiration is set then notification will be sent as per
+			 configured value. The notification will be sent every day from the
+			 60 days or the configured value for certificate expiration."
+		::= { jnxJsCertNotificationType 1 }
+
+
+
+    -- ***************************************************************
+    --  END of File 
+    -- ***************************************************************
+
+END 

mibs/juniper/JUNIPER-JS-DNS-MIB

@@ -0,0 +1,97 @@
+--
+-- Juniper Enterprise specific MIB: DNS MIB
+--
+-- Copyright (c) 2006-2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+JUNIPER-JS-DNS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, 
+    Counter64
+        FROM SNMPv2-SMI
+    jnxJsDnsRoot
+        FROM JUNIPER-JS-SMI;
+
+jnxJsDns MODULE-IDENTITY
+    LAST-UPDATED "200704141245Z" -- Sat Apr 14 12:45:13 2007 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This MIB provides collated statistics for the 
+			Domain Name System (DNS) proxy collected over all 
+			interfaces on which it is configured to serve"
+    ::= { jnxJsDnsRoot 1 }
+
+jnxJsDnsProxyDataObjects OBJECT IDENTIFIER ::= { jnxJsDns 1}
+
+jnxJsDNSProxyQueriesReceived OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of total number of DNS queries received by the 
+		DNS Proxy."
+    ::= { jnxJsDnsProxyDataObjects 1 }
+
+jnxJsDnsProxyResponsesSent OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of DNS queries answered sent by the DNS Proxy. This includes 
+		DNS cache hits and misses that were answered."
+    ::= { jnxJsDnsProxyDataObjects 2 }
+
+jnxJsDnsProxyQueriesForwarded OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of DNS queries forwarded to other DNS server. This
+		is number of queries that have been proxied due to cache 
+		miss."
+    ::= { jnxJsDnsProxyDataObjects 3 }
+
+jnxJsDnsProxyNegativeResponses OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of Negative DNS query responses. This is the count of 
+		DNS queries that the Proxy could not obtain answers for."
+    ::= { jnxJsDnsProxyDataObjects 4 }
+
+jnxJsDnsProxyRetryRequests OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of DNS retry queries that this proxy received."
+    ::= { jnxJsDnsProxyDataObjects 5 }
+
+jnxJsDnsProxyPendingRequests OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of DNS requests yet to be answered."
+    ::= { jnxJsDnsProxyDataObjects 6 }
+
+jnxJsDnsProxyServerFailures OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of DNS Proxy Failures."
+    ::= { jnxJsDnsProxyDataObjects 7 }
+
+END

mibs/juniper/JUNIPER-JS-FLOW-MIB

@@ -0,0 +1,86 @@
+-- *******************************************************************
+-- Juniper enterprise Flow MIB.
+--
+-- Copyright (c) 2017, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+JUNIPER-JS-FLOW-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+        Gauge32, Unsigned32,
+        Counter64,
+        NOTIFICATION-TYPE,
+        MODULE-IDENTITY, OBJECT-TYPE    FROM SNMPv2-SMI
+        DisplayString               FROM SNMPv2-TC
+    jnxJsFlow                       FROM JUNIPER-JS-SMI;
+
+
+    jnxJsFlowMIB    MODULE-IDENTITY
+        LAST-UPDATED  "201701181022Z" -- January 18, 2017
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+                    "Juniper Technical Assistance Center
+                        Juniper Networks, Inc.
+                        1133 Innovation Way
+                        Sunnyvale, CA 94089
+
+                        E-mail: support@juniper.net
+                        HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the object that are used for flow
+             related counters or attributes ."
+    ::= { jnxJsFlow 1 }
+
+
+    jnxJsFlowGenPostFrags OBJECT IDENTIFIER ::= { jnxJsFlowMIB 0 }
+    jnxJsFlowGenPreFrags OBJECT IDENTIFIER ::= { jnxJsFlowMIB 1 }
+    jnxJsFlowSofSummary OBJECT IDENTIFIER ::= { jnxJsFlowMIB 2 }
+
+
+-- ***************************************************************
+-- FLOW Table
+-- ***************************************************************
+
+
+-- **********************************************************************
+-- Tunnel fragment counters information summary:
+-- **********************************************************************
+    jnxJsFlowGenPostFragsCounter OBJECT-TYPE
+        SYNTAX                  Counter64
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "Total ipv4 post fragments generated."
+    ::= { jnxJsFlowGenPostFrags 1 }
+
+    jnxJsFlowGenPreFragsCounter OBJECT-TYPE
+        SYNTAX                  Counter64
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "Total ipv4 pre fragments generated."
+    ::= { jnxJsFlowGenPreFrags 1 }
+
+    jnxJsFlowSofPktProcessedNum OBJECT-TYPE
+        SYNTAX                  Counter64
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "Total number of services-offload packets processed."
+    ::= { jnxJsFlowSofSummary 1 }
+
+    jnxJsFlowSofSessNum OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "Total number of current services-offload sessions."
+    ::= { jnxJsFlowSofSummary 2 }
+
+-- ***************************************************************
+--  END of File
+-- ***************************************************************
+
+END

mibs/juniper/JUNIPER-JS-IDP-MIB

@@ -0,0 +1,202 @@
+--
+-- Juniper Enterprise specific MIB: IDP MIB
+--
+-- Copyright (c) 2006-2009, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+
+    JUNIPER-JS-IDP-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Unsigned32, Integer32,
+        NOTIFICATION-TYPE, TimeTicks, Counter32
+        FROM SNMPv2-SMI
+        DisplayString
+        FROM SNMPv2-TC
+        jnxJsIdpRoot
+        FROM JUNIPER-JS-SMI;
+
+    jnxJsIdpMIB MODULE-IDENTITY
+        LAST-UPDATED "200706132153Z" -- Wed Jun 13 21:53:50 2007UTC
+        ORGANIZATION "Juniper Networks, Inc."
+        CONTACT-INFO
+               " Juniper Technical Assistance Center
+                 Juniper Networks, Inc.
+                 1133 Innovation Way
+                 Sunnyvale, CA 94089
+                 E-mail: support@juniper.net"
+
+        DESCRIPTION
+                "This is Juniper Networks' implementation of enterprise
+                 specific MIB for IDP."
+    
+        ::= {jnxJsIdpRoot 1}
+
+    jnxJsIdpObjects OBJECT IDENTIFIER ::= { jnxJsIdpMIB 1 }
+
+    jnxJsIdpDataPlaneMemoryUsage OBJECT-TYPE
+        SYNTAX  Unsigned32
+        UNITS   "percent"
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Memory used by IDP in the data plane in percentage"
+    
+    ::= { jnxJsIdpObjects 1}
+
+    jnxJsIdpSessionsUsage OBJECT-TYPE
+        SYNTAX  Unsigned32
+        UNITS   "percent"
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Currently allocated sessions by IDP in percentage"
+    
+    ::= { jnxJsIdpObjects 2}
+
+    jnxJsIdpSessionsMaximum OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Maximum number of sessions supported by IDP"
+    ::= { jnxJsIdpObjects 3 }
+
+    jnxJsIdpPoliciesSupported OBJECT-TYPE
+        SYNTAX      Gauge32 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of policies that can be simultaneously loaded on the IDP device"
+    ::= { jnxJsIdpObjects 4}
+
+    jnxJsIdpPoliciesLoaded OBJECT-TYPE
+        SYNTAX      Gauge32 
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of policies that are currently loaded on the IDP device"
+    ::= { jnxJsIdpObjects 5}
+
+    jnxJsIdpActivePolicyName OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE (0..255))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The name of the policy currently active on the device"
+    ::= { jnxJsIdpObjects 6 }
+
+    jnxJsIdpAttackTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF JnxJsIdpAttackEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The attack table giving details of the attack and
+	         the number of hits"
+    ::= { jnxJsIdpObjects 7 }
+
+    jnxJsIdpAttackEntry OBJECT-TYPE
+        SYNTAX      JnxJsIdpAttackEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Attributes of an attack"
+        INDEX { jnxJsIdpAttackIndex }
+    ::= { jnxJsIdpAttackTable 1 }
+
+    JnxJsIdpAttackEntry ::= SEQUENCE {
+        jnxJsIdpAttackIndex Unsigned32,
+        jnxJsIdpAttackName  DisplayString,
+        jnxJsIdpAttackHits  Counter32
+    }
+
+    jnxJsIdpAttackIndex OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The index for the attack table"
+    ::= { jnxJsIdpAttackEntry 1 }
+
+    jnxJsIdpAttackName OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE (0..255))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+             "The name of an attack identified by IDP"
+    ::= { jnxJsIdpAttackEntry 2 }
+
+    jnxJsIdpAttackHits OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+             "Number of times an attack has been hit"
+    ::= { jnxJsIdpAttackEntry 3 }
+
+    jnxJsIdpNotifications OBJECT IDENTIFIER ::= { jnxJsIdpMIB 2 }
+
+    jnxJsIdpNotificationPrefix OBJECT IDENTIFIER ::= { jnxJsIdpNotifications 0 }
+
+    jnxJsIdpRunningDetectorVersion OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (0..255))
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The version of the detector currently loaded"
+    ::= { jnxJsIdpObjects 8 }
+
+    jnxJsIdpSecurityPackageVersion OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (0..255))
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The version of the security package currently loaded"
+    ::= { jnxJsIdpObjects 9 }
+
+    jnxJsIdpLastSignatureUpdateTime OBJECT-TYPE
+        SYNTAX      TimeTicks
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the signature was last updated
+             successfully. Zero if unknown."
+    ::= { jnxJsIdpObjects 10 }
+
+    jnxJsIdpSignatureUpdateStatus OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE (0..255))
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The status of the signature update i.e. success or failure"
+    ::= { jnxJsIdpObjects 11 }
+
+    jnxJsIdpSignatureUpdate NOTIFICATION-TYPE
+        OBJECTS {jnxJsIdpRunningDetectorVersion,
+                 jnxJsIdpSecurityPackageVersion,
+                 jnxJsIdpLastSignatureUpdateTime,
+                 jnxJsIdpSignatureUpdateStatus}
+        STATUS  current
+        DESCRIPTION
+            "A trap which signifies that a signature update has occurred."
+    ::= { jnxJsIdpNotificationPrefix 1 }
+
+    jnxJsIdpAttackLog NOTIFICATION-TYPE
+        OBJECTS {jnxJsIdpAttackName,
+                 jnxJsIdpAttackHits}
+        STATUS  current
+        DESCRIPTION
+            "A trap which signifies that attacks have been detected.
+            
+            jnxJsIdpAttackName is the name of the attacks that have been
+            detected so far and
+            jnxJsIdpAttackHits is the number of times each attack has
+            been detected."
+    ::= { jnxJsIdpNotificationPrefix 2 }
+
+END
+

mibs/juniper/JUNIPER-JS-IF-EXT-MIB

@@ -0,0 +1,367 @@
+-- *******************************************************************
+--Juniper enterprise security Interface extension objects MIB.
+--
+--Copyright(c) 2001 - 2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+--The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+
+    JUNIPER-JS-IF-EXT-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+
+        Counter64, Counter32,
+        MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
+        DisplayString FROM SNMPv2-TC
+
+        ifIndex FROM IF-MIB
+        jnxJsIf FROM JUNIPER-JS-SMI;
+
+
+        jnxJsIfMIB      MODULE-IDENTITY
+            LAST-UPDATED "200705090000Z"-- May 09, 2007
+            ORGANIZATION "Juniper Networks, Inc."
+            CONTACT-INFO
+                "Juniper Technical Assistance Center
+                Juniper Networks, Inc.
+                1194 N.Mathilda Avenue
+                Sunnyvale, CA 94089
+
+                E - mail:support @ juniper.net
+                HTTP://www.juniper.net "
+
+            DESCRIPTION
+                "This module defines the object that are used to monitor
+                the entries in the interfaces pertaining to the security
+                management of the interface."
+
+            REVISION "200705090000Z"-- May 09, 2007
+            DESCRIPTION 
+                "Creation Date"
+            ::= {jnxJsIf 1}
+
+
+    --
+    --node to create the objects
+    --
+    jnxJsIfExtension OBJECT IDENTIFIER ::= {jnxJsIfMIB 1}
+
+
+    --***************************************************************
+    --The Juniper Security interface extension table.
+    -- ***************************************************************
+
+    jnxJsIfMonTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF JnxJsIfMonEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table extend the interface entries to support 
+            security related objects on a particular interface.
+            The table is index by ifIndex."
+        ::= {jnxJsIfExtension 1}
+
+    jnxJsIfMonEntry OBJECT-TYPE
+        SYNTAX JnxJsIfMonEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Entry pertains to an interface."
+        INDEX {ifIndex}
+        ::= {jnxJsIfMonTable 1}
+
+    JnxJsIfMonEntry ::= SEQUENCE
+    {
+        jnxJsIfMonInIcmp            Counter32,
+        jnxJsIfMonInSelf            Counter32,
+        jnxJsIfMonInVpn             Counter32,
+        jnxJsIfMonInPolicyPermit    Counter64,
+        jnxJsIfMonOutPolicyPermit   Counter64,
+        jnxJsIfMonConn              Counter32,
+        jnxJsIfMonInMcast           Counter32,
+        jnxJsIfMonOutMcast          Counter32,
+        jnxJsIfMonPolicyDeny        Counter32,
+        jnxJsIfMonNoGateParent      Counter32,
+        jnxJsIfMonTcpProxyDrop      Counter32,
+        jnxJsIfMonNoDip             Counter32,
+        jnxJsIfMonNoNspTunnel       Counter32,
+        jnxJsIfMonNoNatCon          Counter32,
+        jnxJsIfMonInvalidZone       Counter32,
+        jnxJsIfMonIpClsFail         Counter32,
+        jnxJsIfMonAuthDrop          Counter32,
+        jnxJsIfMonMultiUserAuthDrop Counter32,
+        jnxJsIfMonLoopMultiDipDrop  Counter32,
+        jnxJsIfMonAddrSpoof         Counter32,
+        jnxJsIfMonLpDrop            Counter32,
+        jnxJsIfMonNullZone          Counter32,
+        jnxJsIfMonNoGate            Counter32,
+        jnxJsIfMonNoMinorSess       Counter32,
+        jnxJsIfMonNvecErr           Counter32,
+        jnxJsIfMonTcpSeq            Counter32,
+        jnxJsIfMonIllegalPak        Counter32,
+        jnxJsIfMonNoRoute           Counter32,
+        jnxJsIfMonAuthFail          Counter32,
+        jnxJsIfMonSaInactive        Counter32,
+        jnxJsIfMonNoSa              Counter32,
+        jnxJsIfMonSelfPktDrop       Counter32
+    }
+
+    jnxJsIfMonInIcmp OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "ICMP packets received."
+        ::= {jnxJsIfMonEntry 1}
+
+    jnxJsIfMonInSelf OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets for self received."
+        ::= {jnxJsIfMonEntry 2}
+
+    jnxJsIfMonInVpn OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "VPN packets received."
+        ::= {jnxJsIfMonEntry 3}
+
+    jnxJsIfMonInPolicyPermit OBJECT-TYPE
+        SYNTAX Counter64
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Incoming bytes permitted by policy."
+        ::= {jnxJsIfMonEntry 4}
+
+    jnxJsIfMonOutPolicyPermit OBJECT-TYPE
+        SYNTAX Counter64
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Outgoing bytes permitted by policy."
+        ::= {jnxJsIfMonEntry 5}
+
+    jnxJsIfMonConn OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Incoming connections established."
+        ::= {jnxJsIfMonEntry 6}
+
+    jnxJsIfMonInMcast OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Multicast packets received."
+        ::= {jnxJsIfMonEntry 7}
+
+    jnxJsIfMonOutMcast OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Multicast packets sent."
+        ::= {jnxJsIfMonEntry 8}
+
+    jnxJsIfMonPolicyDeny OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to policy deny."
+        ::= {jnxJsIfMonEntry 9}
+
+    jnxJsIfMonNoGateParent OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no parent for a gate."
+        ::= {jnxJsIfMonEntry 10}
+
+    jnxJsIfMonTcpProxyDrop OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to syn-attack protection."
+        ::= {jnxJsIfMonEntry 11}
+
+    jnxJsIfMonNoDip OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to dip errors."
+        ::= {jnxJsIfMonEntry 12}
+
+    jnxJsIfMonNoNspTunnel OBJECT-TYPE
+         SYNTAX Counter32
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+            "Packets dropped because no nsp tunnel found."
+        ::= {jnxJsIfMonEntry 13}
+
+    jnxJsIfMonNoNatCon OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no more sessions."
+        ::= {jnxJsIfMonEntry 14}
+
+    jnxJsIfMonInvalidZone OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because an invalid zone received the packet."
+        ::= {jnxJsIfMonEntry 15}
+
+    jnxJsIfMonIpClsFail OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to IP classification failure."
+        ::= {jnxJsIfMonEntry 16}
+
+    jnxJsIfMonAuthDrop OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to user auth errors."
+        ::= {jnxJsIfMonEntry 17}
+
+    jnxJsIfMonMultiUserAuthDrop OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to multiple user auth in loopback sessions."
+        ::= {jnxJsIfMonEntry 18}
+
+    jnxJsIfMonLoopMultiDipDrop OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to multiple DIP in loopback sessions."
+        ::= {jnxJsIfMonEntry 19}
+
+    jnxJsIfMonAddrSpoof OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to address spoofing."
+        ::= {jnxJsIfMonEntry 20}
+
+    jnxJsIfMonLpDrop OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no loopback."
+        ::= {jnxJsIfMonEntry 21}
+
+    jnxJsIfMonNullZone OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no zone or null-zone binding."
+        ::= {jnxJsIfMonEntry 22}
+
+    jnxJsIfMonNoGate OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no nat gate."
+        ::= {jnxJsIfMonEntry 23}
+
+    jnxJsIfMonNoMinorSess OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no minor session."
+        ::= {jnxJsIfMonEntry 24}
+
+    jnxJsIfMonNvecErr OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped due to no session for gate."
+        ::= {jnxJsIfMonEntry 25}
+
+    jnxJsIfMonTcpSeq OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because TCP seq number out of window."
+        ::= {jnxJsIfMonEntry 26}
+
+    jnxJsIfMonIllegalPak OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because they didn't make any sense."
+        ::= {jnxJsIfMonEntry 27}
+
+    jnxJsIfMonNoRoute OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because no route present."
+        ::= {jnxJsIfMonEntry 28}
+                        
+    jnxJsIfMonAuthFail OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because auth failed."
+        ::= {jnxJsIfMonEntry 29}
+
+    jnxJsIfMonSaInactive OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because sa is not active."
+        ::= {jnxJsIfMonEntry 30}
+
+    jnxJsIfMonNoSa OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because no sa found for incoming spi."
+        ::= {jnxJsIfMonEntry 31}
+
+    jnxJsIfMonSelfPktDrop OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Packets dropped because no one interested in self packets."
+        ::= {jnxJsIfMonEntry 32}
+            
+END

mibs/juniper/JUNIPER-JS-IPSEC-VPN-MIB

@@ -0,0 +1,171 @@
+-- *******************************************************************
+-- Juniper Networks Security IPSEC VPN object mibs 
+-- This Mib provides extension to JUNIPER-IPSEC-FLOW-MON_MIB.
+--
+-- Copyright (c) 2001-2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+JUNIPER-JS-IPSEC-VPN-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE  
+            FROM SNMPv2-SMI
+        TEXTUAL-CONVENTION, DisplayString 
+            FROM SNMPv2-TC
+        jnxJsIPSecVpn 
+            FROM JUNIPER-JS-SMI
+        jnxIpSecTunnelMonEntry
+            FROM JUNIPER-IPSEC-FLOW-MON-MIB;
+
+    jnxJsIpSecVpnMib  MODULE-IDENTITY
+        LAST-UPDATED "200705112153Z" --  May 11, 2007 
+        ORGANIZATION "Juniper Networks, Inc."
+        CONTACT-INFO
+                "Juniper Technical Assistance Center
+                      Juniper Networks, Inc.
+                      1133 Innovation Way
+                      Sunnyvale, CA 94089
+                      E-mail: support@juniper.net"
+        DESCRIPTION
+            "This module defines the object used to monitor the
+             entries pertaining to IPSec objects and the management
+             of the IPSEC VPN functionalities for Juniper security 
+             product lines.  
+
+             This mib module extend Juniper's common IPSEC flow monitoring
+             MIB, building on the existing common infrastruature, the  
+	     security implementation integrates the value-added 
+	     features for the security products"
+        REVISION "200704270000Z"
+	DESCRIPTION 
+            "Create the jnxJsIpSecTunnelTable as an augmented table 
+             to the jnxIpSecTunnelMonTable in JUNIPER-IPSEC-FLOW-MON-MIB."
+        ::= { jnxJsIPSecVpn 1 } 
+
+
+    jnxJsIpSecVpnNotifications OBJECT IDENTIFIER ::= { jnxJsIpSecVpnMib 0 }
+    jnxJsIpSecVpnPhaseOne      OBJECT IDENTIFIER ::= { jnxJsIpSecVpnMib 1 }
+    jnxJsIpSecVpnPhaseTwo      OBJECT IDENTIFIER ::= { jnxJsIpSecVpnMib 2 }
+   
+
+    -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+    -- TEXTURE CONVENTION 
+    -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+    JnxJsIpSecVpnType  ::= TEXTUAL-CONVENTION
+         STATUS     current
+         DESCRIPTION
+             "The type of the remote peer gateway (endpoint). It can be one
+             of the following two types:
+               - policyBased : tunnels requires a policy with action 
+                 'tunnel' to trigger IPSEC VPN.  The device receives traffic
+                 and matches it with policy that has action 'tunnel', it 
+                 performs the encryption/decryption and authentication options
+                 negotiated for this VPN phase 2 negotiation.  
+               - routeBased : requires a tunnel interface a route directing
+                 traffic to protected networks to exit the system using that 
+                 tunnel interface.  The tunnel interface is bound to a Phase 2
+                 VPN configuration that specifies all the tunnel parameters.
+             "
+         SYNTAX INTEGER {
+                   policyBased (1),
+                   routeBased  (2)
+         }  
+
+   -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+   -- The IPsec Phase-2 Tunnel Table
+   -- 
+   -- During this phase, IKE negotiates IPSEC SA parameters and setup 
+   -- matching IPSEC SA in the peers.
+   -- 
+   -- Phase 2 VPN: tunnel peer connection, associated with a specific policy
+   -- or a tunnel interface.  Phase 2 security association components include
+   -- encryption and authentication algorithms, proxy-IDs and optional DH 
+   -- group values.
+   -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+     jnxJsIpSecTunnelTable OBJECT-TYPE
+         SYNTAX SEQUENCE OF JnxJsIpSecTunnelEntry
+         MAX-ACCESS 	not-accessible
+         STATUS         current
+         DESCRIPTION
+            "The IPsec Phase-2 Tunnel Table.
+             There is one entry in this table for each active IPsec Phase-2 
+             Tunnel.  If the tunnel is terminated, then the entry is no longer 
+             available after the table has been refreshed. "
+         ::= { jnxJsIpSecVpnPhaseTwo 1 }
+
+     jnxJsIpSecTunnelEntry OBJECT-TYPE
+         SYNTAX     JnxJsIpSecTunnelEntry
+         MAX-ACCESS not-accessible
+         STATUS     current
+         DESCRIPTION
+            "Each entry contains the attributes
+             associated with an active IPsec Phase-2 Tunnel."
+	 AUGMENTS   { jnxIpSecTunnelMonEntry }  -- This table augments the
+                                                -- jnxIpSecTunnelMonTable
+         ::= { jnxJsIpSecTunnelTable 1 }
+
+      JnxJsIpSecTunnelEntry ::= SEQUENCE {
+         jnxJsIpSecTunPolicyName           DisplayString,
+         jnxJsIpSecVpnTunType              JnxJsIpSecVpnType, 
+	 jnxJsIpSecTunCfgMonState          INTEGER, 
+	 jnxJsIpSecTunState                INTEGER 
+      }											
+
+      jnxJsIpSecTunPolicyName   OBJECT-TYPE
+         SYNTAX 	DisplayString(SIZE(0..80)) 
+         MAX-ACCESS     read-only 
+         STATUS         current 
+         DESCRIPTION
+            "The policy name assoicated with this tunnel if the 
+             this IPSEC VPN is policy based.  Otherwise, this attribute
+             is not applicable."
+         ::= { jnxJsIpSecTunnelEntry 1 }
+	
+
+      jnxJsIpSecVpnTunType OBJECT-TYPE
+         SYNTAX     JnxJsIpSecVpnType
+         MAX-ACCESS read-only               
+         STATUS     current
+         DESCRIPTION
+            "This attribute indicates the IPSEC VPN tunnel is policy
+             based or route based."
+         ::= { jnxJsIpSecTunnelEntry 2 }
+
+
+      jnxJsIpSecTunCfgMonState OBJECT-TYPE
+         SYNTAX     INTEGER {
+                           disable     (1),
+                           enable      (2)
+		    }
+         MAX-ACCESS 	read-only 
+         STATUS         current 
+         DESCRIPTION
+            "The user configuration states whether to monitor the  
+	     IPSec tunnel to be alive or not. " 
+         ::= { jnxJsIpSecTunnelEntry 3 }
+
+
+	jnxJsIpSecTunState OBJECT-TYPE
+         SYNTAX     INTEGER {
+                         up 	(1),
+                         down	(2),
+                         vpnMonitoringDisabled (3)
+		    }
+         MAX-ACCESS 	read-only 
+         STATUS		current 
+         DESCRIPTION
+            "This attribute indicates whether the IPSec Tunnel is up or
+	         down, determined by icmp ping if the jnxJsIpSecTunCfgMonState
+             is enable.  
+
+             Down: VPN monitor detects the tunnel is down
+             Up:   VPN monitor detects the tunnel is up.
+             vpnMonitoringDisabled: user has disabled VPN tunnel monitoring." 
+         ::= { jnxJsIpSecTunnelEntry 4 }
+
+END
+

mibs/juniper/JUNIPER-JS-NAT-MIB

@@ -0,0 +1,763 @@
+-- *******************************************************************
+-- Juniper enterprise Network Address Translation (NAT) MIB.
+--
+-- Copyright (c) 2001-2012, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+	JUNIPER-JS-NAT-MIB DEFINITIONS ::= BEGIN
+
+	IMPORTS
+
+        Gauge32, Integer32,
+        Counter32,
+        NOTIFICATION-TYPE,
+    	MODULE-IDENTITY, OBJECT-TYPE	FROM SNMPv2-SMI
+
+	InterfaceIndex                  FROM IF-MIB
+
+	DateAndTime,
+    	DisplayString		        FROM SNMPv2-TC 
+    	InetAddressType,
+        InetAddress,
+        InetAddressIPv4 	        FROM INET-ADDRESS-MIB
+
+	jnxJsNAT                        FROM JUNIPER-JS-SMI;
+
+
+	jnxJsNatMIB  	MODULE-IDENTITY
+    	LAST-UPDATED  "201301051022Z" -- January 05, 2012
+    	ORGANIZATION  "Juniper Networks, Inc."
+    	CONTACT-INFO
+					"Juniper Technical Assistance Center
+						Juniper Networks, Inc.
+						1133 Innovation Way
+						Sunnyvale, CA 94089
+
+						E-mail: support@juniper.net
+						HTTP://www.juniper.net"
+    	DESCRIPTION
+            "This module defines the object that are used to monitor
+             network address translation attributes."
+
+        REVISION        "200704132022Z" -- April 13, 2007
+    	DESCRIPTION 	"Creation Date"
+
+        REVISION        "201203011122Z" -- March 01, 2012
+        DESCRIPTION     "Deprecated jnxJsNatRuleTransHits and
+                         jnxJsNatPoolTransHits, added
+                         jnxJsNatRuleHits and jnxJsNatPoolHits."
+
+        REVISION        "201301051022Z" -- January 05, 2012
+        DESCRIPTION     "added jnxJsNatRuleNumOfSessions in 
+                         jnxJsNatRuleEntry;
+                         added jnxJsNatPoolUtil in
+                         jnxJsNatPoolEntry;
+                         added jnxJsNatTrapRuleName, jnxJsNatTrapRuleType, 
+                         jnxJsNatTrapRuleNumOfSessions and
+                         jnxJsNatRuleThresholdStatus."
+
+        REVISION        "201807101022Z" -- July 10, 2018
+        DESCRIPTION     "added jnxJsNatSrcNumPortAvail,
+                         jnxJsNatSrcNumAddressAvail and
+                         jnxJsNatSrcNumAddressInuse in jnxJsSrcNatStatsEntry;
+                         added jnxJsNatTransType in jnxJsNatRuleTable."
+
+    ::= { jnxJsNAT 1 }   
+
+
+    jnxJsNatNotifications OBJECT IDENTIFIER ::= { jnxJsNatMIB 0 }
+    jnxJsNatObjects       OBJECT IDENTIFIER ::= { jnxJsNatMIB 1 }
+    jnxJsNatTrapVars      OBJECT IDENTIFIER ::= { jnxJsNatMIB 2 }
+
+
+    -- ***************************************************************
+    -- Source NAT (Network Address Translation) Table  
+    -- ***************************************************************
+
+    jnxJsSrcNatNumOfEntries OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Total number of dynamic addresses being translated.  
+
+			 jnxJsSrcNatNumOfEntries provides the total number 
+		     of entries in the jnxJsSrcNatTable. "
+            ::= { jnxJsNatObjects 1 }
+	
+
+    jnxJsSrcNatTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsSrcNatEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        deprecated
+        DESCRIPTION
+            "This table exposes the source NAT translation 
+			 attributes of the translated addresses. 
+
+			 When performing source IP address translation, the device 
+			 translates the original source IP address and/or port 
+			 number to different one.  The resource, address source pools
+			 provide the security device with a supply of addresses from 
+			 which to draw when performing source network address translation.
+
+			 The security device has the following types of source pools:
+				- source pool with PAT (Port Address Translation)
+				- source pool without PAT
+				- Static Source Pool
+
+			 This table contains information on source IP address 
+			 translation only."
+    	::= { jnxJsNatObjects 2 }   
+
+    jnxJsSrcNatEntry OBJECT-TYPE
+        SYNTAX        JnxJsSrcNatEntry
+        MAX-ACCESS    not-accessible
+        STATUS        deprecated
+        DESCRIPTION
+            "Source NAT address entries.  It is indexed by the address  
+			 pool table and the address allocated. "
+        INDEX   { jnxJsNatSrcIpPoolName,
+				  jnxJsNatSrcGlobalAddr  }
+        ::= { jnxJsSrcNatTable 1 }
+
+    JnxJsSrcNatEntry ::= SEQUENCE
+    {
+        jnxJsNatSrcIpPoolName			DisplayString,
+		jnxJsNatSrcGlobalAddr			InetAddressIPv4,
+		jnxJsNatSrcPortPoolType			INTEGER,
+		jnxJsNatSrcNumOfPortInuse 		INTEGER,
+		jnxJsNatSrcNumOfSessions 		INTEGER,
+		jnxJsNatSrcAssocatedIf 			InterfaceIndex
+    }
+
+
+    jnxJsNatSrcIpPoolName OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..32)) 
+        MAX-ACCESS    accessible-for-notify 
+        STATUS        deprecated
+        DESCRIPTION
+        	"The name of dynamic source IP address pool. 
+
+			 This is the address pool where the translated   
+			 address is allocated from. "
+		::= { jnxJsSrcNatEntry 1 }
+
+	jnxJsNatSrcGlobalAddr OBJECT-TYPE
+        SYNTAX        InetAddressIPv4
+        MAX-ACCESS    not-accessible
+        STATUS        deprecated
+        DESCRIPTION
+        	"The name of dynamic source IP address allocated from 
+		 	the address pool used in the NAT translation. "
+		::= { jnxJsSrcNatEntry 2 }
+
+	jnxJsNatSrcPortPoolType OBJECT-TYPE
+        SYNTAX        INTEGER {
+						withPAT 		(1),
+						withoutPAT		(2),
+						static 			(3)
+						} 		 	
+        MAX-ACCESS    read-only
+        STATUS        deprecated
+        DESCRIPTION
+        	"Source NAT can do address translation with or without port 
+		 	 address translation (PAT).  The source port pool type indicates
+			 whether the address translation is done with port or without
+         	 the port, or if it is a static translation.
+		
+			 withPAT(Source Pool with PAT): the security device translates 
+			 both source IP address and port number of the packets 
+
+			 withoutPAT (Source Pool without PAT): the device performs source 
+			 network address translation for the IP address without 
+			 performing port address translation (PAT) for the source port
+             number.
+
+			 Static translation means that one range of IP addresses is 
+		     statically mapped one to one to a shifted range of IP addresses. 
+			 "
+		::= { jnxJsSrcNatEntry 3 }
+
+	jnxJsNatSrcNumOfPortInuse OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only 
+        STATUS        deprecated
+        DESCRIPTION
+       	 	"The number of ports in use for this NAT address entry.
+
+			 This attribute is only applicable to NAT translation with 
+			 PAT."
+		::= { jnxJsSrcNatEntry 4 }
+
+	jnxJsNatSrcNumOfSessions OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only 
+        STATUS        deprecated
+        DESCRIPTION
+        	"The number of sessions are in use based on this NAT address 
+			 entry.
+
+			 This attribute is only applicable to NAT translation without PAT."
+		::= { jnxJsSrcNatEntry 5 }
+
+	jnxJsNatSrcAssocatedIf OBJECT-TYPE
+        SYNTAX        InterfaceIndex
+        MAX-ACCESS    read-only 
+        STATUS        deprecated
+        DESCRIPTION
+        	"The index of interface associated with this NAT address entry. 
+
+                 This is an unique value, greater than zero, for each 
+                 interface."
+		::= { jnxJsSrcNatEntry 6 }
+
+
+    -- ***************************************************************
+    --  Port Usage of Interface Source Pool 
+    -- ***************************************************************
+
+    jnxJsNatIfSrcPoolPortTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsNatIfSrcPoolPortEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+			"This table monitors the port usage of the NAT interface 
+			 source IP address pool.
+
+			 Interface source pool is pre-defined.  This source pool is
+			 referenced in a policy it is configured.  The security 
+			 device translates the source IP address to the address of
+             the egress interface for the traffic matching a policy which 
+             references interface source pool.  The security device always 
+             applies port address translation (PAT) for interface source
+             pool. "
+        ::= { jnxJsNatObjects 3 }  
+
+    jnxJsNatIfSrcPoolPortEntry OBJECT-TYPE
+        SYNTAX        JnxJsNatIfSrcPoolPortEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Source NAT address entries.  It is indexed by the address  
+             pool table and the address. "
+        INDEX   { jnxJsNatIfSrcPoolIndex }
+        ::= { jnxJsNatIfSrcPoolPortTable 1 }
+
+    JnxJsNatIfSrcPoolPortEntry ::= SEQUENCE
+    {
+		jnxJsNatIfSrcPoolIndex 		         INTEGER,
+		jnxJsNatIfSrcPoolTotalSinglePorts    INTEGER,
+		jnxJsNatIfSrcPoolAllocSinglePorts    INTEGER,
+        jnxJsNatIfSrcPoolTotalTwinPorts      INTEGER,
+        jnxJsNatIfSrcPoolAllocTwinPorts      INTEGER
+    }
+
+    jnxJsNatIfSrcPoolIndex OBJECT-TYPE
+        SYNTAX        INTEGER(0..2147483647)
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+        	"The index of the port pool of this address pool."
+    ::= { jnxJsNatIfSrcPoolPortEntry 1 }
+
+    jnxJsNatIfSrcPoolTotalSinglePorts OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"The total number of single ports in a port pool."
+    ::= { jnxJsNatIfSrcPoolPortEntry 2 }
+
+    jnxJsNatIfSrcPoolAllocSinglePorts OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"The number of single ports in a port pool allocated 
+			 or inuse."
+    ::= { jnxJsNatIfSrcPoolPortEntry 3 }
+
+    jnxJsNatIfSrcPoolTotalTwinPorts OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"The total number of twin ports in a port pool."
+    ::= { jnxJsNatIfSrcPoolPortEntry 4 }
+
+    jnxJsNatIfSrcPoolAllocTwinPorts OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"The number of twin ports in a port pool allocated 
+			 or inuse."
+    ::= { jnxJsNatIfSrcPoolPortEntry 5 }
+
+    -- ***************************************************************
+    --  New Source NAT Table
+    -- ***************************************************************
+
+    jnxJsSrcNatStatsTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsSrcNatStatsEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "This table exposes the source NAT translation 
+			 attributes of the translated addresses. 
+
+			 When performing source IP address translation, the device 
+			 translates the original source IP address and/or port 
+			 number to different one.  The resource, address source pools
+			 provide the security device with a supply of addresses from 
+			 which to draw when performing source network address translation.
+
+			 The security device has the following types of source pools:
+				- source pool with PAT (Port Address Translation)
+				- source pool without PAT
+				- Static Source Pool
+
+			 This table contains information on source IP address 
+			 translation only."
+    	::= { jnxJsNatObjects 4 }   
+
+    jnxJsSrcNatStatsEntry OBJECT-TYPE
+        SYNTAX        JnxJsSrcNatStatsEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Source NAT address entries.  It is indexed by the address  
+			 pool table and the address allocated. "
+        INDEX   { jnxJsNatSrcPoolName,
+                  jnxJsNatSrcXlatedAddrType,
+                  jnxJsNatSrcXlatedAddr  }
+        ::= { jnxJsSrcNatStatsTable 1 }
+
+    JnxJsSrcNatStatsEntry ::= SEQUENCE
+    {
+        jnxJsNatSrcPoolName			DisplayString,
+        jnxJsNatSrcXlatedAddrType	INTEGER,
+        jnxJsNatSrcXlatedAddr		InetAddress,
+        jnxJsNatSrcPoolType         INTEGER,
+        jnxJsNatSrcNumPortInuse     INTEGER,
+        jnxJsNatSrcNumSessions      INTEGER,
+        jnxJsNatSrcNumPortAvail     Counter32,
+        jnxJsNatSrcNumAddressAvail  Counter32,
+        jnxJsNatSrcNumAddressInuse  Counter32
+    }
+
+
+    jnxJsNatSrcPoolName OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..32)) 
+        MAX-ACCESS    accessible-for-notify 
+        STATUS        current
+        DESCRIPTION
+        	"The name of dynamic source IP address pool. 
+
+			 This is the address pool where the translated   
+			 address is allocated from. "
+		::= { jnxJsSrcNatStatsEntry 1 }
+
+	jnxJsNatSrcXlatedAddrType OBJECT-TYPE
+        SYNTAX        INTEGER {
+                        ipv4      (1),
+                        ipv6      (2)
+                      }
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The type of dynamic source IP address allocated from 
+            the address pool used in the NAT translation. 
+            For NAT MIB, supporting ipv4(1) and ipv6(2) only."
+		::= { jnxJsSrcNatStatsEntry 2 }
+
+	jnxJsNatSrcXlatedAddr OBJECT-TYPE
+        SYNTAX        InetAddress
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+        	"The name of dynamic source IP address allocated from 
+		 	the address pool used in the NAT translation. 
+		 	For NAT MIB, supporting IPv4 and IPv6 address only. "
+		::= { jnxJsSrcNatStatsEntry 3 }
+
+	jnxJsNatSrcPoolType OBJECT-TYPE
+        SYNTAX        INTEGER {
+                        withPAT         (1),
+                        withoutPAT      (2),
+                        static          (3)
+                      } 		 	
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"Source NAT can do address translation with or without port 
+		 	 address translation (PAT).  The source port pool type indicates
+			 whether the address translation is done with port or without
+         	 the port, or if it is a static translation.
+		
+			 withPAT(Source Pool with PAT): the security device translates 
+			 both source IP address and port number of the packets 
+
+			 withoutPAT (Source Pool without PAT): the device performs source 
+			 network address translation for the IP address without 
+			 performing port address translation (PAT) for the source port
+             number.
+
+			 Static translation means that one range of IP addresses is 
+		     statically mapped one to one to a shifted range of IP addresses. 
+			 "
+		::= { jnxJsSrcNatStatsEntry 4 }
+
+	jnxJsNatSrcNumPortInuse OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only 
+        STATUS        current
+        DESCRIPTION
+       	 	"The number of ports in use for this NAT address entry.
+
+			 This attribute is only applicable to NAT translation with 
+			 PAT."
+		::= { jnxJsSrcNatStatsEntry 5 }
+
+	jnxJsNatSrcNumSessions OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only 
+        STATUS        current
+        DESCRIPTION
+        	"The number of sessions are in use based on this NAT address 
+			 entry.
+
+			 This attribute is only applicable to NAT translation without PAT."
+		::= { jnxJsSrcNatStatsEntry 6 }
+
+        jnxJsNatSrcNumPortAvail OBJECT-TYPE
+        SYNTAX        Counter32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The number of ports available with this pool."
+        ::= { jnxJsSrcNatStatsEntry 7 }
+
+        jnxJsNatSrcNumAddressAvail OBJECT-TYPE
+        SYNTAX        Counter32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The total number of addresses available in this pool."
+        ::= { jnxJsSrcNatStatsEntry 8 }
+
+        jnxJsNatSrcNumAddressInuse OBJECT-TYPE
+        SYNTAX        Counter32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The number of addresses in use from this pool.
+            This attribute is only applicable to pools used with
+            source dynamic translations."
+        ::= { jnxJsSrcNatStatsEntry 9 }
+
+    -- ***************************************************************
+    --  NAT Rule Hit Table
+    -- ***************************************************************
+
+    jnxJsNatRuleTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsNatRuleEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+			"This table monitors NAT rule hits  "
+        ::= { jnxJsNatObjects 5 }  
+
+    jnxJsNatRuleEntry OBJECT-TYPE
+        SYNTAX        JnxJsNatRuleEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "NAT rule hit entries.  It is indexed by the rule index"
+        INDEX   { jnxJsNatRuleName, jnxJsNatRuleType }
+        ::= { jnxJsNatRuleTable 1 }
+
+    JnxJsNatRuleEntry ::= SEQUENCE
+    {
+        jnxJsNatRuleName                     DisplayString,
+        jnxJsNatRuleType                     INTEGER,
+        jnxJsNatRuleTransHits                INTEGER,
+        jnxJsNatRuleHits                     Counter32,
+        jnxJsNatRuleNumOfSessions            Counter32,
+        jnxJsNatTransType                    INTEGER
+    }
+
+    jnxJsNatRuleName OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..32)) 
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"NAT rule name"
+    ::= { jnxJsNatRuleEntry 1 }
+
+    jnxJsNatRuleType OBJECT-TYPE
+        SYNTAX        INTEGER {
+						source		(1),
+						destination	(2),
+						static		(3)
+				   	  } 		 	
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"NAT types: Source, Destination and Static"
+    ::= { jnxJsNatRuleEntry 2 }
+
+    jnxJsNatRuleTransHits OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only
+        STATUS        deprecated
+        DESCRIPTION
+        	"The number of hits on this NAT rule,
+             Deprecated to avoid negative value."
+    ::= { jnxJsNatRuleEntry 3 }
+
+    jnxJsNatRuleHits OBJECT-TYPE
+        SYNTAX        Counter32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The number of hits on this NAT rule to 
+             deprecate jnxJsNatRuleTransHits"
+    ::= { jnxJsNatRuleEntry 4 }
+
+    jnxJsNatRuleNumOfSessions OBJECT-TYPE
+        SYNTAX        Counter32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The number of sessions on this NAT rule"
+    ::= { jnxJsNatRuleEntry 5 }
+
+    jnxJsNatTransType OBJECT-TYPE
+        SYNTAX        INTEGER {
+                trans-type-none      (10),
+                basic-nat-pt         (11),
+                basic-nat44          (12),
+                basic-nat66          (13),
+                det-napt44           (14),
+                dynamic-nat44        (15),
+                napt-44              (16),
+                napt-66              (17),
+                napt-pt              (18),
+                det-napt64           (19),
+                stateful-nat464      (20),
+                stateful-nat64       (21),
+                dnat-44              (22)
+        }
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The Translation type of this NAT rule"
+    ::= { jnxJsNatRuleEntry 6 }
+
+    -- ***************************************************************
+    --  NAT Pool Hit Table
+    -- ***************************************************************
+
+    jnxJsNatPoolTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsNatPoolEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+			"This table monitors NAT pool hits  "
+        ::= { jnxJsNatObjects 6 }  
+
+    jnxJsNatPoolEntry OBJECT-TYPE
+        SYNTAX        JnxJsNatPoolEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "NAT pool hit entries.  It is indexed by the pool index"
+        INDEX   { jnxJsNatPoolName, jnxJsNatPoolType }
+        ::= { jnxJsNatPoolTable 1 }
+
+    JnxJsNatPoolEntry ::= SEQUENCE
+    {
+        jnxJsNatPoolName                     DisplayString,
+        jnxJsNatPoolType                     INTEGER,
+        jnxJsNatPoolTransHits                INTEGER,
+        jnxJsNatPoolHits                     Counter32,
+        jnxJsNatPoolUtil                     INTEGER
+    }
+
+    jnxJsNatPoolName OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..32)) 
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"NAT Pool name"
+    ::= { jnxJsNatPoolEntry 1 }
+
+    jnxJsNatPoolType OBJECT-TYPE
+        SYNTAX        INTEGER {
+						source		(1),
+						destination	(2),
+						static		(3)
+					  } 		 	
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"NAT types: Source, Destination and Static"
+    ::= { jnxJsNatPoolEntry 2 }
+
+    jnxJsNatPoolTransHits OBJECT-TYPE
+        SYNTAX        INTEGER
+        MAX-ACCESS    read-only
+        STATUS        deprecated
+        DESCRIPTION
+        	"The number of hits on this NAT Pool,
+             Deprecated to avoid negative value."
+    ::= { jnxJsNatPoolEntry 3 }
+
+    jnxJsNatPoolHits OBJECT-TYPE
+        SYNTAX        Counter32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The number of hits on this NAT Pool
+             to deprecate jnxJsNatPoolTransHits."
+    ::= { jnxJsNatPoolEntry 4 }
+
+    jnxJsNatPoolUtil OBJECT-TYPE
+        SYNTAX        INTEGER (0..100)
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+        	"The dynamic pool utilization in percentage."
+    ::= { jnxJsNatPoolEntry 5 }
+
+    -- ***************************************************************
+    --  NAT Trap definition
+    -- ***************************************************************
+
+    --
+	-- Trap variables 
+	-- 
+	jnxJsNatAddrPoolUtil OBJECT-TYPE
+		SYNTAX      Integer32 (0..100)
+		MAX-ACCESS  accessible-for-notify
+		STATUS      current
+		DESCRIPTION
+			"The dynamic address pool utilization in percentage."
+        ::= { jnxJsNatTrapVars 1 }
+
+    jnxJsNatTrapPoolName OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..32))
+        MAX-ACCESS    accessible-for-notify
+        STATUS        current
+        DESCRIPTION
+            "Source NAT Pool name who issues trap"
+       ::= { jnxJsNatTrapVars 2 }
+
+    jnxJsNatPatPoolUtil OBJECT-TYPE
+		SYNTAX      Integer32 (0..100)
+		MAX-ACCESS  accessible-for-notify
+		STATUS      current
+		DESCRIPTION
+			"The dynamic pat pool utilization in percentage."
+        ::= { jnxJsNatTrapVars 3 }
+
+    jnxJsNatTrapRuleName OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(1..32))
+		MAX-ACCESS  accessible-for-notify
+		STATUS      current
+		DESCRIPTION
+			"NAT rule name"
+        ::= { jnxJsNatTrapVars 4 }
+
+    jnxJsNatTrapRuleType OBJECT-TYPE
+        SYNTAX        INTEGER {
+						source		(1),
+						destination	(2),
+						static		(3)
+				   	  }
+        MAX-ACCESS    accessible-for-notify
+        STATUS        current
+        DESCRIPTION
+            "NAT types: Source, Destination and Static"
+       ::= { jnxJsNatTrapVars 5 }
+
+    jnxJsNatTrapRuleNumOfSessions OBJECT-TYPE
+		SYNTAX      Integer32
+		MAX-ACCESS  accessible-for-notify
+		STATUS      current
+		DESCRIPTION
+			"The number of sessions"
+        ::= { jnxJsNatTrapVars 6 }
+
+    --
+	-- Trap notifications 
+	--
+
+    --
+    -- NAT Address Pool Utilization Threshold Status 
+    -- 
+    jnxJsNatAddrPoolThresholdStatus NOTIFICATION-TYPE
+		OBJECTS			{ jnxJsNatSrcIpPoolName,
+						  jnxJsNatAddrPoolUtil }
+        STATUS         deprecated 
+        DESCRIPTION
+             "The NAT address pool untilization threshold status
+              trap signifies that the address pool utilization
+              is either exceeds certain percentage, or clear of 
+              that percentage.
+					
+			  jnxJsNatSrcIpPoolName is the name of the resource pool
+			  jnxJsNatAddrPoolUtil is the percentage of utilization 
+              of the address pool." 
+        ::= { jnxJsNatNotifications 1 }
+	
+    -- NAT Source Pool Utilization Threshold Status
+    -- updated since jnxJsNatSrcIpPoolName is deprecated
+    --
+    jnxJsSrcNatPoolThresholdStatus NOTIFICATION-TYPE
+        OBJECTS         { jnxJsNatTrapPoolName,
+                          jnxJsNatAddrPoolUtil,
+                          jnxJsNatPatPoolUtil }
+        STATUS         current
+        DESCRIPTION
+             "The Source NAT pool untilization threshold status
+              trap signifies that the address pool or PAT utilization
+              is either exceeds certain percentage, or clear of that
+              percentage.
+              
+              jnxJsNatTrapPoolName is the name of source pool
+              jnxJsNatAddrPoolUtil is the percentage of utilization
+              of the address pool.
+              jnxJsNatPatPoolUtil is the percentage of utilization
+              of the pat pool."
+        ::= { jnxJsNatNotifications 2 }       
+
+	
+    -- NAT rule session count Threshold Status
+    --
+    jnxJsNatRuleThresholdStatus NOTIFICATION-TYPE
+        OBJECTS         { jnxJsNatTrapRuleName,
+                          jnxJsNatTrapRuleType,
+                          jnxJsNatTrapRuleNumOfSessions }
+        STATUS         current
+        DESCRIPTION
+             "The NAT rule session count threshold status 
+              trap signifies that the number of sessions
+              is either exceeds certain threshold, or clear of that
+              threshold.
+              
+              jnxJsNatTrapRuleName is the name of rule
+              jnxJsNatTrapRuleType is the type of rule.
+              jnxJsNatTrapRuleConcurrentHits is the session count
+              of that rule."
+        ::= { jnxJsNatNotifications 3 }
+
+    -- ***************************************************************
+    --  END of File 
+    -- ***************************************************************
+
+END 

mibs/juniper/JUNIPER-JS-PACKET-MIRROR-MIB

@@ -0,0 +1,491 @@
+-- *******************************************************************
+-- Juniper enterprise specific Packet Mirror MIB.
+--
+-- Copyright (c) 2001-2012, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+    JUNIPER-JS-PACKET-MIRROR-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        IpAddress, Unsigned32,
+        NOTIFICATION-TYPE, MODULE-IDENTITY, 
+        OBJECT-TYPE	
+            FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION, DisplayString, DateAndTime
+            FROM SNMPv2-TC 
+
+        jnxJsPacketMirror 
+            FROM JUNIPER-JS-SMI
+
+        Ipv6AddressPrefix
+            FROM IPV6-TC;
+
+    jnxJsPacketMirrorMIB  MODULE-IDENTITY
+        LAST-UPDATED  "201604050000Z"    -- April 05, 2016
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "The packet mirror MIB for the Juniper Networks enterprise."
+        REVISION      "200910290000Z"   -- October 29, 2009
+    	DESCRIPTION   "Creation Date"
+
+        REVISION     "201002250000Z"    -- February 25, 2010
+        DESCRIPTION  "Added analyzer address to the LI Service Activated trap."
+
+        REVISION     "201012160000Z"    -- December 16, 2010
+        DESCRIPTION  "Added Target Ipv6 Address address to traps."
+
+        REVISION     "201103160000Z"    -- March 16, 2011
+        DESCRIPTION  "Added Target Ipv6 Prefix Length to traps."
+
+        REVISION     "201103230000Z"    -- March 23, 2011
+        DESCRIPTION  "Add missing Ipv6 Prefix Length to traps. Use SYNTAX 
+                      Counter64 for tranmitted and received Octets."
+
+        REVISION     "201106070000Z"    -- June 7, 2011
+        DESCRIPTION  "Change SYNTAX of Mirror Identifier."
+
+
+        REVISION     "201111230000Z"    -- November 23, 2011
+        DESCRIPTION  "Add jnxJsPacketMirrorTriggerType circuitId."
+
+        REVISION     "201604050000Z"    -- April 05, 2016
+        DESCRIPTION  "Changed trap class from SNMP_TRAP_CLASS_AUTH
+                      to SNMP_TRAP_CLASS_V3_ONLY"
+      	::= { jnxJsPacketMirror 1 }
+
+    jnxJsPacketMirrorNotifications OBJECT IDENTIFIER ::= { jnxJsPacketMirrorMIB 0 }
+    jnxJsPacketMirrorObjects       OBJECT IDENTIFIER ::= { jnxJsPacketMirrorMIB 1 }
+
+
+    -- ***************************************************************
+    --  Next Branch node. 
+    -- ***************************************************************
+
+    jnxJsPacketMirrorTrapVars      OBJECT IDENTIFIER ::= { jnxJsPacketMirrorObjects 1 }
+
+        -- ********************************************************************
+        -- Objects used for the packet mirroring traps 
+        -- ********************************************************************
+
+        jnxJsPacketMirrorIdentifier OBJECT-TYPE
+            SYNTAX      Unsigned32
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The mirror identifier."
+            ::= { jnxJsPacketMirrorTrapVars 1 }
+
+        jnxJsPacketMirrorSessionIdentifier OBJECT-TYPE
+            SYNTAX      Unsigned32
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The session identifier."
+            ::= { jnxJsPacketMirrorTrapVars 2 }
+
+        jnxJsPacketMirrorTrigger OBJECT-TYPE
+            SYNTAX      DisplayString
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The trigger that caused mirroring."
+            ::= { jnxJsPacketMirrorTrapVars 3 }
+    
+        jnxJsPacketMirrorTriggerType OBJECT-TYPE
+            SYNTAX      INTEGER {
+                            interfaceString(0),
+                            ipAddress(1),
+                            nasPortId(2),
+                            username(3),
+                            callingStationId(4),
+                            acctSessionId(5),
+                            option82(6),
+                            remoteId(7),
+                            circuitId(8) }
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                 "The trigger type."
+            ::= { jnxJsPacketMirrorTrapVars 4 }
+    
+        jnxJsPacketMirrorConfigurationSource OBJECT-TYPE
+            SYNTAX      INTEGER {
+                            radiusLogin(0),
+                            radiusCoa(1),
+                            cliTrigger(2),
+                            cliStatic(3),
+                            dtcp(4)}
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The configuration source of this mirroring."
+            ::= { jnxJsPacketMirrorTrapVars 5 }
+    
+        jnxJsPacketMirrorErrorCause OBJECT-TYPE
+            SYNTAX      INTEGER {
+                            genericFailure(0),
+                            noResourcesAvailable(1),
+                            memoryExhausted(2),
+                            noSuchName(3),
+                            invalidAnalyzerAddress(4),
+                            noSuchUserOrInterface(5),
+                            featureNotSupported(6),
+                            missingOrInvalidAttribute(7),
+                            routerMismatch(8),
+                            nameLengthExceeded(9),
+                            dfcdNak(10)
+                        }
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The error cause."
+            ::= { jnxJsPacketMirrorTrapVars 6 }
+
+        jnxJsPacketMirrorErrorString OBJECT-TYPE
+            SYNTAX      DisplayString
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The error string as reported by the JUNOS application."
+            ::= { jnxJsPacketMirrorTrapVars 7 }
+
+        jnxJsPacketMirrorApplicationName OBJECT-TYPE
+            SYNTAX      INTEGER { authd(0) }
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The name of the JUNOS application reporting the trap."
+           ::= { jnxJsPacketMirrorTrapVars 8 }
+
+        jnxJsPacketMirrorAnalyzerAddress OBJECT-TYPE
+            SYNTAX      IpAddress
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The IP address of analyzer."
+            ::= { jnxJsPacketMirrorTrapVars 9 }
+
+        jnxJsPacketMirrorUserName OBJECT-TYPE
+            SYNTAX      DisplayString (SIZE(1..64))
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The login name of the user who's traffic is being mirrored."
+            ::= { jnxJsPacketMirrorTrapVars 10 }
+
+        jnxJsPacketMirrorDateAndTime OBJECT-TYPE
+            SYNTAX      DateAndTime
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The time of event."
+            ::= { jnxJsPacketMirrorTrapVars 11 }
+
+        jnxJsPacketMirrorRouterId OBJECT-TYPE
+            SYNTAX      DisplayString (SIZE(1..257))
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The VRF ID in JUNOS. Represented as the Logical Router (LR)
+                 Name followed by the Router Instance (RI) Name."
+            ::= { jnxJsPacketMirrorTrapVars 12 }
+
+        jnxJsPacketMirrorDirection OBJECT-TYPE
+            SYNTAX      INTEGER {
+                            ingress(0),
+                            egress(1),
+                            bidirection(2)
+                        }
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The mirroring direction."
+            ::= { jnxJsPacketMirrorTrapVars 13 }
+
+        jnxJsPacketMirrorTargetIpAddress OBJECT-TYPE
+            SYNTAX      IpAddress
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "IP address of the mirrored interface."
+            ::= { jnxJsPacketMirrorTrapVars 14 }
+
+        jnxJsPacketMirrorTerminationReason OBJECT-TYPE
+            SYNTAX      INTEGER {
+                            genericFailure(0),
+                            userRequest(1),
+                            lostCarrier(2),
+                            lostService(3),
+                            idleTimeout(4),
+                            sessionTimeout(5),
+                            adminReset(6),
+                            adminReboot(7),
+                            portError(8),
+                            nasError(9),
+                            nasRequest0(10),
+                            nasReboot1(11),
+                            portUnneeded(12),
+                            portPreempted(13),
+                            portSuspended(14),
+                            serviceUnavailable(15),
+                            callback(16),
+                            userError(17),
+                            hostRequest(18),
+                            supplicantRestart(19),
+                            reauthenticationFailure(20),
+                            portReinitialized(21),
+                            portAdministrativelyDisabled(22),
+                            authenticationReject(23),
+                            interfaceDeleted(24)
+                        }
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The reason for ending a mirroring session which the analyzer may
+                 interpret as an access or packet session event."
+            ::= { jnxJsPacketMirrorTrapVars 15 }
+
+        jnxPacketMirrorCallingStationIdentifier  OBJECT-TYPE
+            SYNTAX      DisplayString (SIZE(1..64))
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The calling station id of the subscriber who's traffic is being monitored."
+            ::= { jnxJsPacketMirrorTrapVars 16 }
+
+        jnxPacketMirrorNasIdentifier   OBJECT-TYPE
+            SYNTAX      DisplayString (SIZE(1..64))
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The Nas identification where the traffic is being monitored."
+            ::= { jnxJsPacketMirrorTrapVars 17 }
+
+        jnxJsPacketMirrorOctetsReceived OBJECT-TYPE
+            SYNTAX      Counter64
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The subscriber octet count received."
+            ::= { jnxJsPacketMirrorTrapVars 18 }
+
+        jnxJsPacketMirrorOctetsTransmitted OBJECT-TYPE
+            SYNTAX      Counter64
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "The subscriber octet count transmitted."
+            ::= { jnxJsPacketMirrorTrapVars 19 }
+
+        jnxJsPacketMirrorTargetIpv6Address OBJECT-TYPE
+            SYNTAX      Ipv6AddressPrefix
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "IPv6 address of the mirrored interface."
+            ::= { jnxJsPacketMirrorTrapVars 20 }
+
+        jnxJsPacketMirrorTrgtIpv6PfxLen OBJECT-TYPE
+            SYNTAX      Unsigned32
+            MAX-ACCESS  accessible-for-notify
+            STATUS      current
+            DESCRIPTION
+                "IPv6 prefix length of the mirrored interface."
+            ::= { jnxJsPacketMirrorTrapVars 21 }
+
+    -- ***************************************************************
+    -- definition of packet mirroring traps
+    -- ***************************************************************
+	
+        --
+        --  Mirroring Failed
+        --
+
+        jnxJsPacketMirrorMirroringFailure NOTIFICATION-TYPE
+        OBJECTS {
+            jnxJsPacketMirrorDateAndTime,
+            jnxJsPacketMirrorConfigurationSource,
+            jnxJsPacketMirrorTriggerType,
+            jnxJsPacketMirrorTrigger,
+            jnxJsPacketMirrorRouterId,
+            jnxJsPacketMirrorUserName,
+            jnxJsPacketMirrorIdentifier,
+            jnxJsPacketMirrorSessionIdentifier,
+            jnxJsPacketMirrorErrorCause,
+            jnxJsPacketMirrorApplicationName,
+            jnxJsPacketMirrorErrorString }
+        STATUS       current
+        DESCRIPTION
+         "The jnxJsPacketMirrorMirroringFailure Trap indicates that 
+          the packet mirroring operation failed."
+        ::= { jnxJsPacketMirrorNotifications 1 }
+
+        --
+        --  Target has logged in
+        --
+        jnxJsPacketMirrorLiSubscriberLoggedIn NOTIFICATION-TYPE
+        OBJECTS {
+            jnxJsPacketMirrorDateAndTime,
+            jnxJsPacketMirrorConfigurationSource,
+            jnxJsPacketMirrorTriggerType,
+            jnxJsPacketMirrorTrigger,
+            jnxJsPacketMirrorRouterId,
+            jnxJsPacketMirrorIdentifier,
+            jnxJsPacketMirrorSessionIdentifier,
+            jnxJsPacketMirrorDirection,
+            jnxJsPacketMirrorTargetIpAddress,
+            jnxJsPacketMirrorAnalyzerAddress,
+            jnxPacketMirrorNasIdentifier,
+            jnxPacketMirrorCallingStationIdentifier,
+            jnxJsPacketMirrorTargetIpv6Address,
+            jnxJsPacketMirrorTrgtIpv6PfxLen }
+        STATUS       current
+        DESCRIPTION
+        "The jnxJsPacketMirrorLiSubscriberLoggedIn Trap indicates that 
+          the target has logged in."
+        ::= { jnxJsPacketMirrorNotifications 2 }
+
+        --
+        --  Target was unable to log in.
+        --
+        jnxJsPacketMirrorLiSubscriberLogInFailed NOTIFICATION-TYPE
+        OBJECTS {
+             jnxJsPacketMirrorDateAndTime,
+             jnxJsPacketMirrorConfigurationSource,
+             jnxJsPacketMirrorTriggerType,
+             jnxJsPacketMirrorTrigger,
+             jnxJsPacketMirrorRouterId,
+             jnxJsPacketMirrorIdentifier,
+             jnxJsPacketMirrorSessionIdentifier,
+             jnxJsPacketMirrorDirection,
+             jnxJsPacketMirrorTargetIpAddress,
+             jnxJsPacketMirrorAnalyzerAddress,
+             jnxJsPacketMirrorErrorCause,
+             jnxJsPacketMirrorErrorString,
+             jnxPacketMirrorCallingStationIdentifier,
+             jnxJsPacketMirrorTargetIpv6Address,
+             jnxJsPacketMirrorTrgtIpv6PfxLen }
+        STATUS       current
+        DESCRIPTION
+            "The jnxJsPacketMirrorLiSubscriberLogInFailed Trap indicates that 
+             a request for the subscriber log in request failed due to the
+             reason in jnxJsPacketMirrorTerminationReason."
+        ::= { jnxJsPacketMirrorNotifications 3 }
+
+        --
+        --  Target logged out.
+        --
+        jnxJsPacketMirrorLiSubscriberLoggedOut NOTIFICATION-TYPE
+        OBJECTS {
+            jnxJsPacketMirrorDateAndTime,
+            jnxJsPacketMirrorConfigurationSource,
+            jnxJsPacketMirrorTriggerType,
+            jnxJsPacketMirrorTrigger,
+            jnxJsPacketMirrorRouterId,
+            jnxJsPacketMirrorIdentifier,
+            jnxJsPacketMirrorSessionIdentifier,
+            jnxJsPacketMirrorDirection,
+            jnxJsPacketMirrorTargetIpAddress,
+            jnxJsPacketMirrorAnalyzerAddress,
+            jnxJsPacketMirrorTerminationReason,
+            jnxJsPacketMirrorOctetsReceived,
+            jnxJsPacketMirrorOctetsTransmitted,
+            jnxJsPacketMirrorTargetIpv6Address,
+            jnxJsPacketMirrorTrgtIpv6PfxLen }
+        STATUS       current
+        DESCRIPTION
+            "The jnxJsPacketMirrorLiSubscriberLoggedOut Trap indicates that 
+             the target has logged out with one of the reasons in 
+             jnxJsPacketMirrorTerminationReason."
+        ::= { jnxJsPacketMirrorNotifications 4 }
+
+        --
+        --  The LI service on the target has been activated.
+        --
+        jnxJsPacketMirrorLiServiceActivated NOTIFICATION-TYPE
+        OBJECTS {
+            jnxJsPacketMirrorDateAndTime,
+            jnxJsPacketMirrorConfigurationSource,
+            jnxJsPacketMirrorTriggerType,
+            jnxJsPacketMirrorTrigger,
+            jnxJsPacketMirrorRouterId,
+            jnxJsPacketMirrorIdentifier,
+            jnxJsPacketMirrorSessionIdentifier,
+            jnxJsPacketMirrorDirection,
+            jnxJsPacketMirrorTargetIpAddress,
+            jnxPacketMirrorNasIdentifier,
+            jnxPacketMirrorCallingStationIdentifier,
+            jnxJsPacketMirrorAnalyzerAddress,
+            jnxJsPacketMirrorTargetIpv6Address,
+            jnxJsPacketMirrorTrgtIpv6PfxLen }
+        STATUS       current
+        DESCRIPTION
+            "The jnxJsPacketMirrorLiServiceActivated Trap indicates that 
+             packet mirroring on an interface has been activated."
+        ::= { jnxJsPacketMirrorNotifications 5 }
+
+        --
+        --  The LI service on the target failed.
+        --
+        jnxJsPacketMirrorLiServiceActivationFailed NOTIFICATION-TYPE
+        OBJECTS {
+            jnxJsPacketMirrorDateAndTime,
+            jnxJsPacketMirrorConfigurationSource,
+            jnxJsPacketMirrorTriggerType,
+            jnxJsPacketMirrorTrigger,
+            jnxJsPacketMirrorRouterId,
+            jnxJsPacketMirrorIdentifier,
+            jnxJsPacketMirrorSessionIdentifier,
+            jnxJsPacketMirrorDirection,
+            jnxJsPacketMirrorTargetIpAddress,
+            jnxJsPacketMirrorAnalyzerAddress,
+            jnxJsPacketMirrorErrorCause,
+            jnxJsPacketMirrorErrorString,
+            jnxPacketMirrorCallingStationIdentifier,
+            jnxJsPacketMirrorTargetIpv6Address,
+            jnxJsPacketMirrorTrgtIpv6PfxLen }
+        STATUS       current
+        DESCRIPTION
+            "The jnxJsPacketMirrorLiServiceActivationFailed Trap indicates  
+             that the LI service on an interface has failed due to the reason
+             in jnxJsPacketMirrorTerminationReason."
+        ::= { jnxJsPacketMirrorNotifications 6 }
+
+        --
+        --  The LI service on the target has been deactivated.
+        --
+        jnxJsPacketMirrorLiServiceDeactivated NOTIFICATION-TYPE
+        OBJECTS {
+            jnxJsPacketMirrorDateAndTime,
+            jnxJsPacketMirrorConfigurationSource,
+            jnxJsPacketMirrorTriggerType,
+            jnxJsPacketMirrorTrigger,
+            jnxJsPacketMirrorRouterId,
+            jnxJsPacketMirrorIdentifier,
+            jnxJsPacketMirrorSessionIdentifier,
+            jnxJsPacketMirrorDirection,
+            jnxJsPacketMirrorTargetIpAddress,
+            jnxJsPacketMirrorAnalyzerAddress,
+            jnxJsPacketMirrorTerminationReason,
+            jnxJsPacketMirrorTargetIpv6Address,
+            jnxJsPacketMirrorTrgtIpv6PfxLen }
+        STATUS       current
+        DESCRIPTION
+            "The jnxJsPacketMirrorLiServiceDeactivated Trap indicates that 
+             the LI service on an interface has been deactivated due to 
+             the reason in jnxJsPacketMirrorTerminationReason."
+        ::= { jnxJsPacketMirrorNotifications 7 }
+ 
+END

mibs/juniper/JUNIPER-JS-POLICY-MIB

@@ -0,0 +1,750 @@
+-- *******************************************************************
+-- Juniper enterprise specific policy objects MIB.
+--
+-- Copyright (c) 2007, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+JUNIPER-JS-POLICY-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        jnxJsPolicies                    FROM JUNIPER-JS-SMI    
+
+        Integer32, Counter64,
+        Gauge32, Counter32,
+        NOTIFICATION-TYPE,
+        MODULE-IDENTITY, OBJECT-TYPE     FROM SNMPv2-SMI
+        DisplayString, TimeStamp         FROM SNMPv2-TC; 
+
+
+    jnxJsSecPolicyMIB MODULE-IDENTITY
+        LAST-UPDATED  "201307020000Z" -- July 02, 2013
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+
+        DESCRIPTION
+            "This module defines the mib for policy monitoring.
+
+             A security policy, which can be configured from the user 
+             interface controls the traffic flow from one zone to another 
+             zone by defining the kind(s) of traffic permitted from 
+             specified IP sources to specified IP destinations at 
+             scheduled times. 
+
+             Juniper security device enforce the security policies rules 
+             for the transit traffic in terms of which traffic can pass 
+             through the firewall, and the actions taken on the traffic as 
+             it passes through the firewall. "
+        REVISION        "200612140000Z" -- Dec 14, 2006
+        DESCRIPTION     "Creation Date"
+        REVISION        "201307020000Z" -- July 02, 2013
+        DESCRIPTION     "Add policy system wide counters for dropped and accepted ipv4 and ipv6 packets"
+    ::= { jnxJsPolicies 1 }   
+
+
+    jnxJsPolicyNotifications OBJECT IDENTIFIER ::= { jnxJsSecPolicyMIB 0 }
+    jnxJsPolicyObjects       OBJECT IDENTIFIER ::= { jnxJsSecPolicyMIB 1 }
+    jnxJsPolicyTrapVars      OBJECT IDENTIFIER ::= { jnxJsSecPolicyMIB 2 }
+    jnxJsPolicySystemStats   OBJECT IDENTIFIER ::= { jnxJsSecPolicyMIB 3 }
+    jnxJsPolicySystemStatsIPv4   OBJECT IDENTIFIER ::= { jnxJsPolicySystemStats 1 }
+    jnxJsPolicySystemStatsIPv6   OBJECT IDENTIFIER ::= { jnxJsPolicySystemStats 2 }
+
+                
+    -- ***************************************************************
+    --  Security Policy Table
+    -- ***************************************************************
+
+    jnxJsPolicyNumber  OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of policies (regardless of their current 
+             state) present on this system."
+        ::= { jnxJsPolicyObjects 1 }
+
+
+    jnxJsPolicyTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsPolicyEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "The table exposes the security policy entries. Security
+             devices/routers provide a network boundary with a single
+             point of entry and exit point, which allows the screening
+             and directing of traffic through the implementation of
+             access policies. The access policies can permit, deny, 
+             encrypt, authenticate, prioirtize, schedule and monitor
+             the traffic flow through the firewall. 
+             
+             This table lists entries of policy. The number of policies
+             are given by jnxJsPolicyNumber."
+    ::= { jnxJsPolicyObjects 2 }
+
+    jnxJsPolicyEntry OBJECT-TYPE
+        SYNTAX        JnxJsPolicyEntry 
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "An entry contains a security policy.   
+
+            The security policies are configured under from-zone,
+            to-zone direction.  Under a specific zone direction, 
+            each security policy contains name, match-criteria,
+            action, and other options."
+
+        INDEX     { jnxJsPolicyFromZone, 
+                    jnxJsPolicyToZone,
+                    jnxJsPolicyName }
+        ::= { jnxJsPolicyTable 1 }
+
+    JnxJsPolicyEntry ::= SEQUENCE
+    {
+        jnxJsPolicyFromZone                    DisplayString,
+        jnxJsPolicyToZone                      DisplayString,
+        jnxJsPolicyName                        DisplayString,
+        jnxJsPolicySequenceNumber              Integer32,    
+        jnxJsPolicyAction                      INTEGER,
+        jnxJsPolicyScheduler                   DisplayString,
+        jnxJsPolicyState                       INTEGER,
+        jnxJsPolicyStatsAvailability           INTEGER,
+        jnxJsPolicyPerSecBytesThreshold        Integer32,
+        jnxJsPolicyPerMinKbytesThreshold       Integer32
+    }
+
+    jnxJsPolicyFromZone OBJECT-TYPE
+        SYNTAX            DisplayString (SIZE(0..63))
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+            "The attribute displays the from zone name."  
+        ::= { jnxJsPolicyEntry 1 }
+
+    jnxJsPolicyToZone OBJECT-TYPE
+        SYNTAX            DisplayString (SIZE(0..63))
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+            "The attribute exposes the to-zone name."
+        ::= { jnxJsPolicyEntry 2 }
+
+    jnxJsPolicyName OBJECT-TYPE
+        SYNTAX            DisplayString (SIZE(0..63))
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+            "The name of the policy defined. It consists of up to 256 ascii 
+             characters and uniquely identifies the policy entry."
+        ::= { jnxJsPolicyEntry 3 }
+        
+    jnxJsPolicySequenceNumber OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The attribute indicates the policy sequence order of the policy
+             within a specific from-zone and to-zone pair. Policies are matched
+             in a sequence where the ordering is specified by this number."
+        ::= { jnxJsPolicyEntry 4 }
+
+    jnxJsPolicyAction OBJECT-TYPE
+        SYNTAX            INTEGER {
+                              permit    (1),
+                              deny      (2),
+                              reject    (3)
+                          } 
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+            "The attribute indicates the actions performed when the 
+             criteria is matched.
+             
+             The action permit, deny and reject are used configured policies."
+        ::= { jnxJsPolicyEntry 5 }
+
+    jnxJsPolicyScheduler OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE(0..63)) 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The name of the schedule attached to this policy. Certain schedule  
+             has a specified duration and this may effect the status of the 
+             policy."
+        ::= { jnxJsPolicyEntry 6 }
+        
+    jnxJsPolicyState OBJECT-TYPE
+        SYNTAX          INTEGER  {
+                            active        (1),
+                            inactive      (2),
+                            unavailable   (3)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The state of this policy: active, inactive, or unavailable.
+             
+             The state can be effected by the scheduler if the scheduler
+             has a specified duration."
+        ::= { jnxJsPolicyEntry 7 }
+        
+    jnxJsPolicyStatsAvailability OBJECT-TYPE
+        SYNTAX          INTEGER  {
+                            available     (1),
+                            unavailable   (2)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current 
+        DESCRIPTION
+            "The statistics availability of this policy.  
+             
+             The attribute indicates whether the statistics counters are
+             available and are actively updated. If available, there would
+             exists a matching jnxJsPolicyStatsEntry for the policy."
+        ::= { jnxJsPolicyEntry 8 }
+        
+    jnxJsPolicyPerSecBytesThreshold OBJECT-TYPE
+        SYNTAX          Integer32 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The attribute indicates the threshold value of bytes per second."
+        ::= { jnxJsPolicyEntry 9 }
+
+    jnxJsPolicyPerMinKbytesThreshold OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The attribute indicates the threshold value of kbyte per min."
+        ::= { jnxJsPolicyEntry 10 }
+ 
+ 
+    -- ***************************************************************
+    --  Security Policy Statistics Table
+    -- ***************************************************************
+
+    jnxJsPolicyStatsTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsPolicyStatsEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "The table exposes the security policy statistics entries. These
+             statistics can be enabled and disabled by configuration on a
+             per policy basis."
+    ::= { jnxJsPolicyObjects 3 }
+
+    jnxJsPolicyStatsEntry OBJECT-TYPE
+        SYNTAX        JnxJsPolicyStatsEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "An entry contains a security policy.
+
+            The security policies are configured under from-zone,
+            to-zone direction.  Under a specific zone direction,
+            each security policy contains name, match-criteria,
+            action, and other options."
+
+        INDEX     { jnxJsPolicyFromZone,
+                    jnxJsPolicyToZone,
+                    jnxJsPolicyName }
+        ::= { jnxJsPolicyStatsTable 1 }
+
+    JnxJsPolicyStatsEntry ::= SEQUENCE
+    {
+        jnxJsPolicyStatsCreationTime           TimeStamp,
+        jnxJsPolicyStatsInputBytes             Counter64,
+        jnxJsPolicyStatsInputByteRate          Gauge32,
+        jnxJsPolicyStatsOutputBytes            Counter64,
+        jnxJsPolicyStatsOutputByteRate         Gauge32,
+        jnxJsPolicyStatsInputPackets           Counter32,
+        jnxJsPolicyStatsInputPacketRate        Gauge32,
+        jnxJsPolicyStatsOutputPackets          Counter32,
+        jnxJsPolicyStatsOutputPacketRate       Gauge32,
+        jnxJsPolicyStatsNumSessions            Counter32,
+        jnxJsPolicyStatsSessionRate            Gauge32,
+        jnxJsPolicyStatsSessionDeleted         Counter32,
+        jnxJsPolicyStatsLookups                Counter32,
+        jnxJsPolicyStatsCountAlarm             Counter32,
+        jnxJsPolicyStatsInBytesInit            Counter64,
+        jnxJsPolicyStatsInBytesRep             Counter64,
+        jnxJsPolicyStatsInByteRtInit           Gauge32,
+        jnxJsPolicyStatsInByteRtRep            Gauge32,
+        jnxJsPolicyStatsOutBytesInit           Counter64,
+        jnxJsPolicyStatsOutBytesRep            Counter64,
+        jnxJsPolicyStatsOutByteRtInit          Gauge32,
+        jnxJsPolicyStatsOutByteRtRep           Gauge32,
+        jnxJsPolicyStatsInPacketsInit          Counter32,
+        jnxJsPolicyStatsInPacketsRep           Counter32,
+        jnxJsPolicyStatsInPacketRtInit         Gauge32,
+        jnxJsPolicyStatsInPacketRtRep          Gauge32,
+        jnxJsPolicyStatsOutPacketsInit         Counter32,
+        jnxJsPolicyStatsOutPacketsRep          Counter32,
+        jnxJsPolicyStatsOutPacketRtInit        Gauge32,
+        jnxJsPolicyStatsOutPacketRtRep         Gauge32
+    }
+
+    jnxJsPolicyStatsCreationTime OBJECT-TYPE
+        SYNTAX          TimeStamp 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The creation timestamp of the policy statistics entry. The
+             timestamp is modified during the creation and deletion of the
+             policy statistics entry. When the timestamp changes, the policy
+             entry statistics is assumed to be a new statistics entry and not
+             associated with previous statistic entry of the same indices."
+        ::= { jnxJsPolicyStatsEntry 1 }
+
+    jnxJsPolicyStatsInputBytes OBJECT-TYPE
+        SYNTAX          Counter64 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input bytes enters the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 2 }
+
+    jnxJsPolicyStatsInputByteRate OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input bytes per second or the rate that enters the FW 
+             through this policy."
+        ::= { jnxJsPolicyStatsEntry 3 }
+
+    jnxJsPolicyStatsOutputBytes OBJECT-TYPE
+        SYNTAX          Counter64 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output bytes associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 4 }
+
+    jnxJsPolicyStatsOutputByteRate OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output bytes per second or the rate associated 
+             with this policy."
+        ::= { jnxJsPolicyStatsEntry 5 }
+
+    jnxJsPolicyStatsInputPackets OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input packets enters the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 6 }
+
+    jnxJsPolicyStatsInputPacketRate OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input packets per second or the input packet rate 
+             of the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 7 }
+
+    jnxJsPolicyStatsOutputPackets OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output packets associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 8 }
+
+    jnxJsPolicyStatsOutputPacketRate OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output packets per second or the rate 
+             associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 9 }
+
+    jnxJsPolicyStatsNumSessions OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of sessions associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 10 }
+
+    jnxJsPolicyStatsSessionRate OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The rate of the sessions associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 11 }
+
+    jnxJsPolicyStatsSessionDeleted OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of sessions associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 12 }
+
+    jnxJsPolicyStatsLookups OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of policy lookups performed."
+        ::= { jnxJsPolicyStatsEntry 13 }
+
+    jnxJsPolicyStatsCountAlarm OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          obsolete 
+        DESCRIPTION
+            "The number of alarm counted when the traffic exceeds 
+             certain threshold configuration. The node is obsoleted."
+        ::= { jnxJsPolicyStatsEntry 14 }
+
+    jnxJsPolicyStatsInBytesInit OBJECT-TYPE
+        SYNTAX          Counter64 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input bytes in the session initial direction enters 
+            the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 15 }
+		
+	jnxJsPolicyStatsInBytesRep OBJECT-TYPE
+        SYNTAX          Counter64 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input bytes in the session reply direction enters 
+            the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 16 }		
+
+    jnxJsPolicyStatsInByteRtInit OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input bytes in the session initial direction 
+            per second or the rate that enters the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 17 }
+
+    jnxJsPolicyStatsInByteRtRep OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input bytes in the session reply direction 
+            per second or the rate that enters the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 18 }
+		
+    jnxJsPolicyStatsOutBytesInit OBJECT-TYPE
+        SYNTAX          Counter64 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output bytes in the session initial direction 
+            associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 19 }
+		
+    jnxJsPolicyStatsOutBytesRep OBJECT-TYPE
+        SYNTAX          Counter64 
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output bytes in the session reply direction 
+            associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 20 }
+
+    jnxJsPolicyStatsOutByteRtInit OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output bytes in the session initial direction 
+            per second or the rate associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 21 }
+
+    jnxJsPolicyStatsOutByteRtRep OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output bytes in the session reply direction per 
+            second or the rate associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 22 }
+
+    jnxJsPolicyStatsInPacketsInit OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input packets in the session initial direction 
+            enters the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 23 }
+
+    jnxJsPolicyStatsInPacketsRep OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input packets in the session reply direction 
+            enters the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 24 }
+
+    jnxJsPolicyStatsInPacketRtInit OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input packets in the session initial direction 
+            per second or the input packet rate of the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 25 }
+		
+    jnxJsPolicyStatsInPacketRtRep OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of input packets in the session reply direction 
+            per second or the input packet rate of the FW through this policy."
+        ::= { jnxJsPolicyStatsEntry 26 }
+
+    jnxJsPolicyStatsOutPacketsInit OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output packets in the session initial direction 
+            associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 27 }
+		
+    jnxJsPolicyStatsOutPacketsRep OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output packets in the session reply direction 
+            associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 28 }
+		
+    jnxJsPolicyStatsOutPacketRtInit OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output packets in the session initial direction 
+            per second or the rate associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 29 }
+	
+    jnxJsPolicyStatsOutPacketRtRep OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "The number of output packets in the session reply direction 
+            per second or the rate associated with this policy."
+        ::= { jnxJsPolicyStatsEntry 30 }
+	
+
+    -- ***************************************************************
+    --  System Wide Policy Statistics related
+    -- ***************************************************************
+    jnxJsPolicySystemStatsEnabled  OBJECT-TYPE
+        SYNTAX            INTEGER {
+                              enabled     (1),
+                              disabled    (2)
+                          } 
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+            "The configured status of Policy System Wide Statistic Collection."
+        ::= { jnxJsPolicySystemStats 3 }
+                    
+    -- ***************************************************************
+    --  System Wide Policy Statistics IPv4
+    -- ***************************************************************
+  
+    jnxJsPolicySystemStatsTotalAllowIPv4Packets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv4 packets allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 1 }
+        
+    jnxJsPolicySystemStatsTotalAllowIPv4Bytes  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv4 bytes allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 2 }
+        
+    jnxJsPolicySystemStatsTotalAllowIPv4PacketsRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv4 packets allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 3 }
+ 
+    jnxJsPolicySystemStatsTotalAllowIPv4BytesRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv4 bytes allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 4 }
+
+    jnxJsPolicySystemStatsTotalDropIPv4Packets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv4 packets dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 5 }
+
+    jnxJsPolicySystemStatsTotalDropIPv4Bytes  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv4 bytes dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 6 }
+
+    jnxJsPolicySystemStatsTotalDropIPv4PacketsRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv4 packets dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 7 }
+        
+    jnxJsPolicySystemStatsTotalDropIPv4BytesRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv4 bytes dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 8 }
+
+    jnxJsPolicySystemStatsTotalAllowIPv4Flows  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv4 flows allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 9 }
+
+    jnxJsPolicySystemStatsTotalAllowIPv4FlowsRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv4 flows allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv4 10 }
+
+    -- ***************************************************************
+    --  System Wide Policy Statistics IPv6
+    -- ***************************************************************
+    
+    jnxJsPolicySystemStatsTotalAllowIPv6Packets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv6 packets allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 1 }
+
+    jnxJsPolicySystemStatsTotalAllowIPv6Bytes  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv6 bytes allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 2 }
+
+    jnxJsPolicySystemStatsTotalAllowIPv6PacketsRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv6 packets allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 3 }
+        
+    jnxJsPolicySystemStatsTotalAllowIPv6BytesRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv6 bytes allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 4 }
+        
+    jnxJsPolicySystemStatsTotalDropIPv6Packets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv6 packets dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 5 }
+
+    jnxJsPolicySystemStatsTotalDropIPv6Bytes  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv6 bytes dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 6 }
+
+    jnxJsPolicySystemStatsTotalDropIPv6PacketsRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv6 packets dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 7 }
+
+    jnxJsPolicySystemStatsTotalDropIPv6BytesRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv6 bytes dropped by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 8 }
+
+    jnxJsPolicySystemStatsTotalAllowIPv6Flows  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of IPv6 flows allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 9 }
+
+    jnxJsPolicySystemStatsTotalAllowIPv6FlowsRate  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The rate of IPv6 flows allowed by all policies."
+        ::= { jnxJsPolicySystemStatsIPv6 10 }
+
+    -- ***************************************************************
+    -- definition of access authentication related traps.
+    -- FIX : To be implemented.
+    -- ***************************************************************
+
+
+END

mibs/juniper/JUNIPER-JS-SMI

@@ -0,0 +1,58 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2002-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-JS-SMI DEFINITIONS ::= BEGIN
+
+IMPORTS
+		jnxJsMibRoot 		FROM JUNIPER-SMI;
+
+
+
+-- 
+-- This MIB file added the nodes to create the Juniper Security 
+-- tree structure under the object node: jnxJsObjects.
+-- In general, the prefix jnxJs is used to name the object identifiers
+-- and to designate them.    
+-- 
+-- The jnxJsSecurity node is designed to provide a branch for the security
+-- related MIB defintions specific to the JS products.  
+-- 
+
+--
+-- Object identifier added as the basis for identifying other JS nodes.
+-- 
+jnxJsSecurity                   OBJECT IDENTIFIER ::= { jnxJsMibRoot 1 }
+
+
+--
+-- next level object identifiers under jnxJsSecurity
+-- 
+jnxJsIf                         OBJECT IDENTIFIER ::= { jnxJsSecurity 1 }
+jnxJsAuth                       OBJECT IDENTIFIER ::= { jnxJsSecurity 2 }
+jnxJsCertificates               OBJECT IDENTIFIER ::= { jnxJsSecurity 3 }
+jnxJsPolicies                   OBJECT IDENTIFIER ::= { jnxJsSecurity 4 }
+jnxJsIPSecVpn                   OBJECT IDENTIFIER ::= { jnxJsSecurity 5 }
+
+-- Removed the resource node since there is no object implemented.
+--  
+-- jnxJsResources                  OBJECT IDENTIFIER ::= { jnxJsSecurity 6 }
+
+jnxJsNAT                        OBJECT IDENTIFIER ::= { jnxJsSecurity 7 }
+jnxJsScreening                  OBJECT IDENTIFIER ::= { jnxJsSecurity 8 }
+jnxJsDhcp                       OBJECT IDENTIFIER ::= { jnxJsSecurity 9 }
+jnxJsDnsRoot                    OBJECT IDENTIFIER ::= { jnxJsSecurity 10 }
+jnxJsIdpRoot                    OBJECT IDENTIFIER ::= { jnxJsSecurity 11 }
+jnxJsSPUMonitoringRoot          OBJECT IDENTIFIER ::= { jnxJsSecurity 12 }
+jnxJsUTMRoot                    OBJECT IDENTIFIER ::= { jnxJsSecurity 13 }
+jnxJsChassisCluster             OBJECT IDENTIFIER ::= { jnxJsSecurity 14 }
+jnxVoip                         OBJECT IDENTIFIER ::= { jnxJsSecurity 15 }
+jnxJsPacketMirror               OBJECT IDENTIFIER ::= { jnxJsSecurity 16 }
+jnxLsysSecurityProfile          OBJECT IDENTIFIER ::= { jnxJsSecurity 17 }
+jnxJsFlow                       OBJECT IDENTIFIER ::= { jnxJsSecurity 18 }
+END

mibs/juniper/JUNIPER-JS-UTM-AV-MIB

@@ -0,0 +1,463 @@
+-- *******************************************************************
+-- Juniper enterprise security UTM MIB.       
+--
+-- Copyright (c) 2001-2011, Juniper Networks, Inc.
+-- All rights reserved.      
+--                 
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+    
+JUNIPER-JS-UTM-AV-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        Integer32, 
+        NOTIFICATION-TYPE,                 
+        MODULE-IDENTITY, OBJECT-TYPE   FROM SNMPv2-SMI
+        DisplayString                  FROM SNMPv2-TC
+        jnxJsUTMRoot                   FROM JUNIPER-JS-SMI;
+        
+
+    jnxJsAntiVirus MODULE-IDENTITY
+        LAST-UPDATED  "201102080800Z" -- Feb 08, 2011
+        ORGANIZATION  "Juniper Networks, Inc."    
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way     
+             Sunnyvale, CA 94089      
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"           
+        DESCRIPTION            
+            "This module defines the MIB for Juniper Enterprise specific
+             antivirus functionality. Juniper documentation is recommended
+             as the reference."
+            
+        REVISION      "201102080800Z" 
+        DESCRIPTION   "Creation Date"
+
+        ::= { jnxJsUTMRoot 1 }                 
+
+
+    jnxJsAntiVirusObjects     OBJECT IDENTIFIER ::= { jnxJsAntiVirus 1 }
+    jnxJsAntiVirusTraps       OBJECT IDENTIFIER ::= { jnxJsAntiVirus 2 }
+    jnxJsAntiVirusTrapsPrefix OBJECT IDENTIFIER ::= { jnxJsAntiVirus 0 }
+    jnxJsAntiVirusTrapVars    OBJECT IDENTIFIER ::= { jnxJsAntiVirus 3 }
+
+
+    -- ***************************************************************
+    --  anti-virus objects
+    -- ***************************************************************
+
+        
+    -- ***************************************************************
+    --  scan engine objects
+    -- ***************************************************************
+
+    jnxJsAntiVirusEngine OBJECT IDENTIFIER ::= { jnxJsAntiVirusObjects 1 }
+
+    jnxJsAVEngineType OBJECT-TYPE
+        SYNTAX INTEGER {
+            unknown-engine         (1),
+            kaspersky-lab-engine   (2),
+            juniper-express-engine (3),
+            sophos-engine          (4)
+        }
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "The scan engine type in use. User can use CLI to set the
+             engine type to either full AV (kaspersky-lab-engine),
+             express AV (juniper-express-engine) or Sophos AV
+             (sophos-engine). If AV is not configured then engine type
+             is not known."
+        ::= { jnxJsAntiVirusEngine 1 }
+
+    jnxJsAVCurrentPatternVersionString       OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..255))
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Anti-Virus pattern database version currently in use."
+        ::= { jnxJsAntiVirusEngine 2 }
+
+    jnxJsAVDatabaseType OBJECT-TYPE
+        SYNTAX INTEGER {
+            full            (1),
+            express         (2),
+            unknown         (3),
+            sophos          (4)
+        }
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "The Database type in use. User can use CLI to set the
+             engine type to full AV, express AV or Sophos AV. 
+             Corresponding database types are Full for KL Engine,
+             Express for Juniper Express Engine and Sophos for Sophos 
+             AV Engine."
+        ::= { jnxJsAntiVirusEngine 3 }
+
+    -- ***************************************************************
+    --  scan statistics objects
+    -- ***************************************************************
+
+    jnxJsAntiVirusStats OBJECT IDENTIFIER ::= { jnxJsAntiVirusObjects 2 }
+
+    jnxJsAVScanCodeClean           OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests passed Anti-Virus scan."
+        ::= { jnxJsAntiVirusStats 1 }
+
+    jnxJsAVScanCodeInfected        OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests found infected by Anti-Virus scan engine."
+        ::= { jnxJsAntiVirusStats 2 }
+
+    jnxJsAVScanCodeProtected       OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to protected by password."
+        ::= { jnxJsAntiVirusStats 3 }
+
+    jnxJsAVScanCodeDecompress      OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to exceeding max 
+            decmopress layer."
+        ::= { jnxJsAntiVirusStats 4 }
+
+    jnxJsAVScanCodeCorrupted       OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to file corrupted."
+        ::= { jnxJsAntiVirusStats 5 }
+
+    jnxJsAVScanCodeNoResource      OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to out-of-resource."
+        ::= { jnxJsAntiVirusStats 6 }
+
+
+    jnxJsAVScanCodeInternalError   OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to internal error."
+        ::= { jnxJsAntiVirusStats 7 }
+
+    jnxJsAVScanCodeMaxContentSize  OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to exceeding max content
+             size limit."
+        ::= { jnxJsAntiVirusStats 8 }
+
+    jnxJsAVScanCodeTooManyReq      OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to exceeding maximum 
+             requests limit."
+        ::= { jnxJsAntiVirusStats 9 }
+
+
+    jnxJsAVScanCodeTimeout         OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to scan timeout."
+        ::= { jnxJsAntiVirusStats 10 }
+
+    jnxJsAVScanCodeEngineNotReady  OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        deprecated 
+        DESCRIPTION
+            "Number of requests cannot be scanned due to scan engine not ready."
+        ::= { jnxJsAntiVirusStats 11 }
+
+    -- ***************************************************************
+    -- scan engine table objects
+    -- ***************************************************************
+
+    jnxJsUTMAntiVirusEngine OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsUTMAntiVirusEngineEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Table of anti-virus engine objects."
+        ::= { jnxJsAntiVirusObjects 3 }
+        
+    jnxJsUTMAntiVirusEngineEntry OBJECT-TYPE
+        SYNTAX        JnxJsUTMAntiVirusEngineEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Entry for anti-virus engine table."
+        INDEX         { jnxJsUTMAVEngineIndex }
+        ::= { jnxJsUTMAntiVirusEngine 1 }
+    
+    JnxJsUTMAntiVirusEngineEntry ::= SEQUENCE {
+        jnxJsUTMAVEngineIndex                    Integer32,
+        jnxJsUTMAVEngineType                     INTEGER,
+        jnxJsUTMAVPatternVersionString           DisplayString,
+        jnxJsUTMAVDatabaseType                   INTEGER
+    }
+
+    jnxJsUTMAVEngineIndex OBJECT-TYPE
+        SYNTAX        Integer32 (0..'7fffffff'h)
+        MAX-ACCESS    not-accessible 
+        STATUS        current
+        DESCRIPTION
+            "Index is the cluster node number. If the device is
+             not in a cluster mode then it will be the local node
+             number."
+        ::= { jnxJsUTMAntiVirusEngineEntry 1 }
+
+    jnxJsUTMAVEngineType OBJECT-TYPE
+        SYNTAX INTEGER {
+            unknown-engine         (1),
+            kaspersky-lab-engine   (2),
+            juniper-express-engine (3),
+            sophos-engine          (4)
+        }
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The scan engine type in use. User can use CLI to set the
+             engine type to either full AV (kaspersky-lab-engine),
+             express AV (juniper-express-engine) or Sophos AV
+             (sophos-engine). If AV is not configured then engine type
+             is not known."
+        ::= { jnxJsUTMAntiVirusEngineEntry 2 }
+
+    jnxJsUTMAVPatternVersionString       OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..255))
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Anti-Virus pattern database version currently in use."
+        ::= { jnxJsUTMAntiVirusEngineEntry 3 }
+
+    jnxJsUTMAVDatabaseType OBJECT-TYPE
+        SYNTAX INTEGER {
+            full            (1),
+            express         (2),
+            unknown         (3),
+            sophos          (4)
+        }
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The Database type in use. User can use CLI to set the
+             engine type to full AV, express AV or Sophos AV.
+             Corresponding database types are Full for KL Engine,
+             Express for Juniper Express Engine and Sophos for Sophos
+             AV Engine."
+        ::= { jnxJsUTMAntiVirusEngineEntry 4 }
+
+    -- ***************************************************************
+    -- scan statistics table objects
+    -- ***************************************************************
+
+    jnxJsUTMAntiVirusStats OBJECT-TYPE
+        SYNTAX        SEQUENCE OF JnxJsUTMAntiVirusStatsEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Table of anti-virus stats objects."
+        ::= { jnxJsAntiVirusObjects 4 }
+
+    jnxJsUTMAntiVirusStatsEntry OBJECT-TYPE
+        SYNTAX        JnxJsUTMAntiVirusStatsEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "Entry of anti-virus stats object."
+        INDEX         { jnxJsUTMAVStatsIndex }
+        ::= { jnxJsUTMAntiVirusStats 1 }
+
+    JnxJsUTMAntiVirusStatsEntry ::= SEQUENCE {
+        jnxJsUTMAVStatsIndex                Integer32,
+        jnxJsUTMAVScanCodeClean             Integer32,
+        jnxJsUTMAVScanCodeInfected          Integer32,
+        jnxJsUTMAVScanCodeProtected         Integer32,
+        jnxJsUTMAVScanCodeDecompress        Integer32,
+        jnxJsUTMAVScanCodeCorrupted         Integer32,
+        jnxJsUTMAVScanCodeNoResource        Integer32,
+        jnxJsUTMAVScanCodeInternalError     Integer32,
+        jnxJsUTMAVScanCodeMaxContentSize    Integer32,
+        jnxJsUTMAVScanCodeTooManyReq        Integer32,
+        jnxJsUTMAVScanCodeTimeout           Integer32,
+        jnxJsUTMAVScanCodeEngineNotReady    Integer32
+    }
+
+    jnxJsUTMAVStatsIndex OBJECT-TYPE
+        SYNTAX        Integer32 (0..'7fffffff'h)
+        MAX-ACCESS    not-accessible 
+        STATUS        current
+        DESCRIPTION
+            "Index is the cluster node number. If the device is
+             not in a cluster mode then it will be the local node
+             number."
+        ::= { jnxJsUTMAntiVirusStatsEntry 1 }
+
+    jnxJsUTMAVScanCodeClean           OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests passed Anti-Virus scan."
+        ::= { jnxJsUTMAntiVirusStatsEntry 2 }
+
+    jnxJsUTMAVScanCodeInfected        OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests found infected by Anti-Virus scan engine."
+        ::= { jnxJsUTMAntiVirusStatsEntry 3 }
+
+    jnxJsUTMAVScanCodeProtected       OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to protected by password."
+        ::= { jnxJsUTMAntiVirusStatsEntry 4 }
+
+    jnxJsUTMAVScanCodeDecompress      OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to exceeding max
+            decmopress layer."
+        ::= { jnxJsUTMAntiVirusStatsEntry 5 }
+
+    jnxJsUTMAVScanCodeCorrupted       OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to file corrupted."
+        ::= { jnxJsUTMAntiVirusStatsEntry 6 }
+
+    jnxJsUTMAVScanCodeNoResource      OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to out-of-resource."
+        ::= { jnxJsUTMAntiVirusStatsEntry 7 }
+
+    jnxJsUTMAVScanCodeInternalError   OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to internal error."
+        ::= { jnxJsUTMAntiVirusStatsEntry 8 }
+
+    jnxJsUTMAVScanCodeMaxContentSize  OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to exceeding max content
+             size limit."
+        ::= { jnxJsUTMAntiVirusStatsEntry 9 }
+
+    jnxJsUTMAVScanCodeTooManyReq      OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to exceeding maximum
+             requests limit."
+        ::= { jnxJsUTMAntiVirusStatsEntry 10 }
+
+    jnxJsUTMAVScanCodeTimeout         OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to scan timeout."
+        ::= { jnxJsUTMAntiVirusStatsEntry 11 }
+
+    jnxJsUTMAVScanCodeEngineNotReady  OBJECT-TYPE
+        SYNTAX        Integer32
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Number of requests cannot be scanned due to scan engine not ready."
+        ::= { jnxJsUTMAntiVirusStatsEntry 12 }
+
+
+    -- ***************************************************************
+    --  antivirus traps
+    -- ***************************************************************
+
+    --
+    -- When new pattern is updated, a trap is generated.
+    --
+
+    jnxJsAvPatternUpdateTrap NOTIFICATION-TYPE
+        OBJECTS       { jnxAVPatternVersionString,
+                        jnxAVPatternTimestamp
+                      }
+        STATUS        current
+        DESCRIPTION
+            "This traps is raised when the Anti-Virus pattern database is 
+             updated successfully."
+        ::= { jnxJsAntiVirusTrapsPrefix 1 }
+
+
+    --
+    -- Trap variables
+    --
+
+    jnxAVPatternVersionString       OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..255))
+        MAX-ACCESS    accessible-for-notify
+        STATUS        current
+        DESCRIPTION
+            "Anti-Virus last successfully updated pattern database version."
+        ::= { jnxJsAntiVirusTrapVars 1 }
+
+
+    jnxAVPatternTimestamp           OBJECT-TYPE
+        SYNTAX        DisplayString (SIZE(1..255))
+        MAX-ACCESS    accessible-for-notify
+        STATUS        current
+        DESCRIPTION
+            "Anti-Virus last successfully updated pattern database timestamp."
+        ::= { jnxJsAntiVirusTrapVars 2 }
+
+--
+-- End of File
+--
+
+END

mibs/juniper/JUNIPER-JVAE-INFRA-MIB

@@ -0,0 +1,300 @@
+--
+-- Juniper JunosV App Engine Infrastructure MIB
+--
+-- Copyright (c) 2012 Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-JVAE-INFRA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY
+        FROM SNMPv2-SMI
+
+    DisplayString
+        FROM SNMPv2-TC
+
+    InetAddressIPv4, InetAddressIPv6
+        FROM INET-ADDRESS-MIB
+
+    jnxJVAEMibRoot
+        FROM JUNIPER-SMI;
+
+jnxJVAEInfraMIB MODULE-IDENTITY
+    LAST-UPDATED "201208010000Z" -- Aug 01 00:00:00 2012 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+    DESCRIPTION
+        "The MIB module for JunosV App Engine Infrastructure."
+    REVISION    "201208010000Z" -- Aug 01 00:00:00 2012 UTC
+    DESCRIPTION
+            "Initial version of JVAE Infrastructure MIB."
+
+    ::= { jnxJVAEMibRoot 1 }
+
+
+jnxJVAEInfraNotifications  OBJECT IDENTIFIER ::= { jnxJVAEInfraMIB 0 }
+jnxJVAEInfraObjects        OBJECT IDENTIFIER ::= { jnxJVAEInfraMIB 1 }
+jnxJVAEInfraTables         OBJECT IDENTIFIER ::= { jnxJVAEInfraObjects 1 }
+
+
+   -- 
+   -- JVAE Infrstructure Objects
+   --
+
+   --
+   -- Compute Node Table
+   --
+
+jnxJVAECNTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Compute Nodes."
+    ::= { jnxJVAEInfraTables 1 }
+
+jnxJVAECNEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A Compute Node."
+    INDEX { jnxJVAECNId }
+    ::= { jnxJVAECNTable 1 }
+
+JnxJVAECNEntry ::= SEQUENCE {
+    jnxJVAECNId                 DisplayString,
+    jnxJVAECNName               DisplayString,
+    jnxJVAECCName               DisplayString,
+    jnxJVAECNState              INTEGER,
+    jnxJVAECNLastStateChange    DisplayString,
+    jnxJVAECNRouterIPv4         InetAddressIPv4,
+    jnxJVAECNRouterIPv6         InetAddressIPv6,
+    jnxJVAECNMgmtIPv4           InetAddressIPv4,
+    jnxJVAECNMgmtIPv6           InetAddressIPv6,
+    jnxJVAECNSWVersion          DisplayString
+}
+
+jnxJVAECNId OBJECT-TYPE
+    SYNTAX       DisplayString (SIZE(1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+         "Id of the Compute Node."
+    ::= { jnxJVAECNEntry 1 }
+
+jnxJVAECNName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..60))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of the Compute Node."
+    ::= { jnxJVAECNEntry 2 }
+
+jnxJVAECCName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..60))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of the Compute Cluster, to which this Compute Node belongs."
+    ::= { jnxJVAECNEntry 3 }
+
+jnxJVAECNState OBJECT-TYPE
+    SYNTAX      INTEGER { offline(0), online(1), error(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "State of Compute Node as seen by the VE platform Manager."
+    ::= { jnxJVAECNEntry 4 }
+
+jnxJVAECNLastStateChange OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(26..30))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The date and time when last state change was observed for this
+         Compute Node."
+    ::= { jnxJVAECNEntry 5 }
+
+jnxJVAECNRouterIPv4  OBJECT-TYPE
+    SYNTAX       InetAddressIPv4
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Network address on the router side, which used for all management
+          between the router and Compute Node."
+    ::= { jnxJVAECNEntry 6 }
+
+jnxJVAECNRouterIPv6  OBJECT-TYPE
+    SYNTAX       InetAddressIPv6
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Network address on the router side, which used for all management
+          between the router and Compute Node."
+    ::= { jnxJVAECNEntry 7 }
+
+jnxJVAECNMgmtIPv4 OBJECT-TYPE
+    SYNTAX      InetAddressIPv4
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "Network address on the compute node side, which used for all management
+          between the router and Compute Node."
+    ::= { jnxJVAECNEntry 8 }
+
+jnxJVAECNMgmtIPv6 OBJECT-TYPE
+    SYNTAX      InetAddressIPv6
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "Network address on the compute node side, which used for all management
+          between the router and Compute Node."
+    ::= { jnxJVAECNEntry 9 }
+
+jnxJVAECNSWVersion OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(1..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+         "Compute Node software version."
+    ::= { jnxJVAECNEntry 10 }
+
+   --
+   -- Virtual Machine Instances Table
+   --
+
+jnxJVAEVMTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAEVMEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of virutal machine instances."
+    ::= { jnxJVAEInfraTables 2 }
+
+jnxJVAEVMEntry OBJECT-TYPE
+    SYNTAX      JnxJVAEVMEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A virutal machine instance."
+    INDEX { jnxJVAEVMId }
+    ::= { jnxJVAEVMTable 1 }
+
+JnxJVAEVMEntry ::= SEQUENCE {
+    jnxJVAEVMId               OCTET STRING,
+    jnxJVAEVMName             DisplayString,
+    jnxJVAEVMCCName           DisplayString,
+    jnxJVAEVMCNName           DisplayString,
+    jnxJVAEVMCNId             DisplayString,
+    jnxJVAEVMUuid             OCTET STRING,
+    jnxJVAEVMPkg              DisplayString,
+    jnxJVAEVMStatus           INTEGER
+}
+
+jnxJVAEVMId OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..127))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An unique identifier for this virtual machine instance. This
+	 identifier is not retained across restart of the subsytem."
+    ::= { jnxJVAEVMEntry 1 }
+
+jnxJVAEVMName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..60))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of the virtual machine instance."
+    ::= { jnxJVAEVMEntry 2 }
+
+jnxJVAEVMCCName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..60))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of the compute cluster which the compute node belongs."
+    ::= { jnxJVAEVMEntry 3 }
+
+jnxJVAEVMCNName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..60))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of the compute node on which the virtual machine runs."
+    ::= { jnxJVAEVMEntry 4 }
+
+jnxJVAEVMCNId OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Id of the compute node on which the virtual machine runs."
+    ::= { jnxJVAEVMEntry 5 }
+
+jnxJVAEVMUuid OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..60))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "UUID of the virtual machine."
+    ::= { jnxJVAEVMEntry 6 }
+
+jnxJVAEVMPkg OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of package installed on the router holding the imgage for
+	 this virtual machine."
+    ::= { jnxJVAEVMEntry 7 }
+
+jnxJVAEVMStatus OBJECT-TYPE
+    SYNTAX      INTEGER { offline(0), online(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Status of the virtual machine instance."
+    ::= { jnxJVAEVMEntry 8 }
+
+
+   --
+   -- JVAE Infrastructure Notifications
+   --
+
+jnxJVAECNStateChange NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNId,
+         jnxJVAECNName,
+         jnxJVAECCName,
+         jnxJVAECNState,
+         jnxJVAECNLastStateChange
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever compute node state changes."
+    ::= { jnxJVAEInfraNotifications  1 }
+
+jnxJVAEVMStateChange NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAEVMId,
+         jnxJVAEVMName,
+         jnxJVAEVMCNId,
+         jnxJVAEVMUuid,
+         jnxJVAEVMStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification whenever the virutal machine status changes."
+    ::= { jnxJVAEInfraNotifications  2 }
+
+END

mibs/juniper/JUNIPER-JVAE-NODE-MIB

@@ -0,0 +1,908 @@
+--
+-- Juniper JunosV App Engine Node MIB
+--
+-- Copyright (c) 2012 Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-JVAE-NODE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY,
+    Gauge32, Counter64
+        FROM SNMPv2-SMI
+
+    DisplayString, PhysAddress, TruthValue
+        FROM SNMPv2-TC
+
+    jnxJVAEMibRoot
+        FROM JUNIPER-SMI;
+
+jnxJVAENodeMIB MODULE-IDENTITY
+    LAST-UPDATED "201208010000Z" -- Aug 01 00:00:00 2012 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+    DESCRIPTION
+        "The MIB modules for JunosV App Engine Compute Nodes."
+    REVISION    "201208010000Z" -- Aug 01 00:00:00 2012 UTC
+    DESCRIPTION
+            "Initial version of JVAE Node MIB."
+
+    ::= { jnxJVAEMibRoot 2 }
+
+
+jnxJVAENodeNotifications  OBJECT IDENTIFIER ::= { jnxJVAENodeMIB 0 }
+jnxJVAENodeObjects        OBJECT IDENTIFIER ::= { jnxJVAENodeMIB 1 }
+jnxJVAENodeTables         OBJECT IDENTIFIER ::= { jnxJVAENodeObjects 1 }
+
+
+   -- 
+   -- JVAE Node Objects
+   --
+
+   --
+   -- Compute Node System Information Table
+   --
+
+jnxJVAECNSysInfoTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNSysInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table for further information on Compute Nodes."
+    ::= { jnxJVAENodeTables 1 }
+
+jnxJVAECNSysInfoEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNSysInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "System information for a Compute Node."
+    INDEX { jnxJVAECNSysId }
+    ::= { jnxJVAECNSysInfoTable 1 }
+
+JnxJVAECNSysInfoEntry ::= SEQUENCE {
+    jnxJVAECNSysId                 DisplayString,
+    jnxJVAECNSysCpus               INTEGER,
+    jnxJVAECNSysProcessingLoad     INTEGER,
+    jnxJVAECNSysMemCapacity        Gauge32,
+    jnxJVAECNSysMemUsed            Gauge32,
+    jnxJVAECNSysMemFree            Gauge32,
+    jnxJVAECNSysMemUsedPr          INTEGER,
+    jnxJVAECNSysSwapCapacity       Gauge32,
+    jnxJVAECNSysSwapFree           Gauge32,
+    jnxJVAECNSysBootMethod         INTEGER,
+    jnxJVAECNSysLastReboot         DisplayString
+}
+
+jnxJVAECNSysId OBJECT-TYPE
+    SYNTAX       DisplayString (SIZE(1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+         "Id of the Compute Node."
+    ::= { jnxJVAECNSysInfoEntry 1 }
+
+jnxJVAECNSysCpus OBJECT-TYPE
+    SYNTAX      INTEGER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The number of CPUs or cores on the Compute Node."
+    ::= { jnxJVAECNSysInfoEntry 2 }
+
+jnxJVAECNSysProcessingLoad OBJECT-TYPE
+    SYNTAX      INTEGER (0..100)
+    UNITS	"%"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "Total processing load on the Compute Node, in percentage."
+    ::= { jnxJVAECNSysInfoEntry 3 }
+
+jnxJVAECNSysMemCapacity OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The amount of RAM on the Compute Node, in kilo bytes. Zero if 
+	  information is unavailable."
+    ::= { jnxJVAECNSysInfoEntry 4 }
+
+jnxJVAECNSysMemUsed OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The amount of RAM used on the Compute Node, in kilo bytes. Zero
+	  if information in unavailable."
+    ::= { jnxJVAECNSysInfoEntry 5 }
+
+jnxJVAECNSysMemFree OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The amount of RAM free on the Compute Node, in kilo bytes. Zero
+	  if information in unavailable."
+    ::= { jnxJVAECNSysInfoEntry 6 }
+
+jnxJVAECNSysMemUsedPr OBJECT-TYPE
+    SYNTAX      INTEGER (0..100)
+    UNITS	"%"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The amount of RAM used on the Compute Node, in percentage. Zero
+	  if information in unavailable."
+    ::= { jnxJVAECNSysInfoEntry 7 }
+
+jnxJVAECNSysSwapCapacity OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "Total swap space on the Compute Node, in kilo bytes. Zero if
+	  information is unavailable."
+    ::= { jnxJVAECNSysInfoEntry 8 }
+
+jnxJVAECNSysSwapFree OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The amout of swap space free on the Compute Node, in kilo bytes.
+	  Zero if information is unavailable."
+    ::= { jnxJVAECNSysInfoEntry 9 }
+
+jnxJVAECNSysBootMethod OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(0), network(1), local (2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "Boot method used by the Compute Node, in the last reboot."
+    ::= { jnxJVAECNSysInfoEntry 10 }
+
+jnxJVAECNSysLastReboot OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(30))
+    UNITS      "Secs"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+         "Seconds passed since the last reboot or restart of the Compute Node."
+    ::= { jnxJVAECNSysInfoEntry 11 }
+
+   --
+   -- Compute Node Processor (CPU) Table
+   --
+
+jnxJVAECNProcessorTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNProcessorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Processors contained in the Compute Nodes."
+    ::= { jnxJVAENodeTables 2 }
+
+jnxJVAECNProcessorEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNProcessorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A Processor."
+    INDEX { jnxJVAECNSysId, jnxJVAECNProcessorId }
+    ::= { jnxJVAECNProcessorTable 1 }
+
+JnxJVAECNProcessorEntry ::= SEQUENCE {
+    jnxJVAECNProcessorId        INTEGER,
+    jnxJVAECNProcessorLoad      INTEGER
+}
+
+jnxJVAECNProcessorId OBJECT-TYPE
+    SYNTAX      INTEGER (1..256)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An unique identifier for the processor with this Compute Node."
+    ::= { jnxJVAECNProcessorEntry 1 }
+
+jnxJVAECNProcessorLoad OBJECT-TYPE
+    SYNTAX      INTEGER (0..100)
+    UNITS	"%"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Load on the processor, expressed in percentage. Zero if information
+         is unavailable."
+    ::= { jnxJVAECNProcessorEntry 2 }
+
+   --
+   -- Compute Node Network Interface Table
+   --
+
+jnxJVAECNifTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNifEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of network interfaces contained in the Compute Nodes."
+    ::= { jnxJVAENodeTables 3 }
+
+jnxJVAECNifEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNifEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A network interface."
+    INDEX { jnxJVAECNSysId, jnxJVAECNifId }
+    ::= { jnxJVAECNifTable 1 }
+
+JnxJVAECNifEntry ::= SEQUENCE {
+    jnxJVAECNifId              INTEGER,
+    jnxJVAECNifName            DisplayString,
+    jnxJVAECNifOperStatus      INTEGER,
+    jnxJVAECNifAdminStatus     INTEGER,
+    jnxJVAECNifLinkDetect      TruthValue,
+    jnxJVAECNifAddress         PhysAddress,
+    jnxJVAECNifInPkts          Counter64,
+    jnxJVAECNifInDiscards      Counter64,
+    jnxJVAECNifInErrors        Counter64,
+    jnxJVAECNifOutPkts         Counter64,
+    jnxJVAECNifOutDiscards     Counter64,
+    jnxJVAECNifOutErrors       Counter64
+}
+
+jnxJVAECNifId OBJECT-TYPE
+    SYNTAX      INTEGER (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An unique identifier for the network interface."
+    ::= { jnxJVAECNifEntry 1 }
+
+jnxJVAECNifName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..10))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Description of the interface."
+    ::= { jnxJVAECNifEntry 2 }
+
+jnxJVAECNifOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { down(0), up (1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Operational state of the interface."
+    ::= { jnxJVAECNifEntry 3 }
+
+jnxJVAECNifAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { down(0), up (1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Administrative state of the interface."
+    ::= { jnxJVAECNifEntry 4 }
+
+jnxJVAECNifLinkDetect OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Link presence, True if present else False. This field is meaningless
+         when the interface is  administered down."
+    ::= { jnxJVAECNifEntry 5 }
+
+jnxJVAECNifAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Physcial address (MAC) of the interface."
+    ::= { jnxJVAECNifEntry 6 }
+
+jnxJVAECNifInPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of packets received on the interface."
+    ::= { jnxJVAECNifEntry 7 }
+
+jnxJVAECNifInDiscards OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of received packets discarded, on the interface."
+    ::= { jnxJVAECNifEntry 8 }
+
+jnxJVAECNifInErrors OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of received packets with errors, on the interface."
+    ::= { jnxJVAECNifEntry 9 }
+
+jnxJVAECNifOutPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of packets sent on the interface."
+    ::= { jnxJVAECNifEntry 10 }
+
+jnxJVAECNifOutDiscards OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of sent packets discarded, on the interface."
+    ::= { jnxJVAECNifEntry 11 }
+
+jnxJVAECNifOutErrors OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of sent packets with errors, on the interface."
+    ::= { jnxJVAECNifEntry 12 }
+
+   --
+   -- Compute Node File System Table
+   --
+
+jnxJVAECNFileSysTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNFileSysEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of mounted file systems in the Compute Nodes."
+    ::= { jnxJVAENodeTables 4 }
+
+jnxJVAECNFileSysEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNFileSysEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A File System."
+    INDEX { jnxJVAECNSysId, jnxJVAECNFileSysId }
+    ::= { jnxJVAECNFileSysTable 1 }
+
+JnxJVAECNFileSysEntry ::= SEQUENCE {
+    jnxJVAECNFileSysId            INTEGER,
+    jnxJVAECNFileSysMountPoint    DisplayString,
+    jnxJVAECNFileSysSize          Gauge32,
+    jnxJVAECNFileSysUsed          Gauge32,
+    jnxJVAECNFileSysFree          Gauge32,
+    jnxJVAECNFileSysUsedPr        INTEGER
+}
+
+jnxJVAECNFileSysId OBJECT-TYPE
+    SYNTAX      INTEGER (1..127)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An unique identifier for the file system."
+    ::= { jnxJVAECNFileSysEntry 1 }
+
+jnxJVAECNFileSysMountPoint OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Filesystem path where the file system is mounted."
+    ::= { jnxJVAECNFileSysEntry 2 }
+
+jnxJVAECNFileSysSize OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total storage capacity of the file system, in kilo bytes."
+    ::= { jnxJVAECNFileSysEntry 3 }
+
+jnxJVAECNFileSysUsed OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Used Storage capacity of the file system, in kilo bytes."
+    ::= { jnxJVAECNFileSysEntry 4 }
+
+jnxJVAECNFileSysFree OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS	"KB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Unused Storage capacity of the file system, in kilo bytes."
+    ::= { jnxJVAECNFileSysEntry 5 }
+
+jnxJVAECNFileSysUsedPr OBJECT-TYPE
+    SYNTAX      INTEGER (0..100)
+    UNITS	"%"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Used Storage capacity of the file system, in percentage."
+    ::= { jnxJVAECNFileSysEntry 6 }
+
+   --
+   -- Compute Node Disk Table
+   --
+
+jnxJVAECNDiskTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNDiskEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Physical Disks connected to the Compute Nodes."
+    ::= { jnxJVAENodeTables 5 }
+
+jnxJVAECNDiskEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNDiskEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A disk."
+    INDEX { jnxJVAECNSysId, jnxJVAECNDiskId }
+    ::= { jnxJVAECNDiskTable 1 }
+
+JnxJVAECNDiskEntry ::= SEQUENCE {
+    jnxJVAECNDiskId            INTEGER,
+    jnxJVAECNDiskSlot          INTEGER,
+    jnxJVAECNDiskModel         DisplayString,
+    jnxJVAECNDiskRevision      DisplayString,
+    jnxJVAECNDiskVendor        DisplayString,
+    jnxJVAECNDiskOSPath        DisplayString
+}
+
+jnxJVAECNDiskId OBJECT-TYPE
+    SYNTAX      INTEGER (1..15)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The unique identifier for this disk."
+    ::= { jnxJVAECNDiskEntry 1 }
+
+jnxJVAECNDiskSlot OBJECT-TYPE
+    SYNTAX      INTEGER (0..14)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The slot at which disk is connected."
+    ::= { jnxJVAECNDiskEntry 2 }
+
+jnxJVAECNDiskModel OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Disk product model."
+    ::= { jnxJVAECNDiskEntry 3 }
+
+jnxJVAECNDiskRevision OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Disk product revision."
+    ::= { jnxJVAECNDiskEntry 4 }
+
+jnxJVAECNDiskVendor OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Disk product vendor."
+    ::= { jnxJVAECNDiskEntry 5 }
+
+jnxJVAECNDiskOSPath OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Disk device path."
+    ::= { jnxJVAECNDiskEntry 6 }
+
+   --
+   -- Compute Node Raid Table
+   --
+
+jnxJVAECNRaidTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNRaidEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Raid Arrays on the Compute Nodes."
+    ::= { jnxJVAENodeTables 6 }
+
+jnxJVAECNRaidEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNRaidEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A Raid array."
+    INDEX { jnxJVAECNSysId, jnxJVAECNRaidId }
+    ::= { jnxJVAECNRaidTable 1 }
+
+JnxJVAECNRaidEntry ::= SEQUENCE {
+    jnxJVAECNRaidId                     INTEGER,
+    jnxJVAECNRaidName                   DisplayString,
+    jnxJVAECNRaidState                  DisplayString,
+    jnxJVAECNRaidLevel                  INTEGER,
+    jnxJVAECNRaidSize                   Gauge32,
+    jnxJVAECNRaidMembers                INTEGER,
+    jnxJVAECNRaidMemberDiskPartitions   DisplayString,
+    jnxJVAECNRaidMemberDiskAtSlots      DisplayString,
+    jnxJVAECNRaidOSPath                 DisplayString
+}
+
+jnxJVAECNRaidId OBJECT-TYPE
+    SYNTAX      INTEGER (1..15)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The unique identifier for this raid array."
+    ::= { jnxJVAECNRaidEntry 1 }
+
+jnxJVAECNRaidName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Name of the raid array."
+    ::= { jnxJVAECNRaidEntry 2 }
+
+jnxJVAECNRaidState OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "State of the raid array."
+    ::= { jnxJVAECNRaidEntry 3 }
+
+jnxJVAECNRaidLevel OBJECT-TYPE
+    SYNTAX      INTEGER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Raid level of the raid array."
+    ::= { jnxJVAECNRaidEntry 4 }
+
+jnxJVAECNRaidSize OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "GB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Size of the raid array."
+    ::= { jnxJVAECNRaidEntry 5 }
+
+jnxJVAECNRaidMembers OBJECT-TYPE
+    SYNTAX      INTEGER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of  members of the raid array."
+    ::= { jnxJVAECNRaidEntry 6 }
+
+jnxJVAECNRaidMemberDiskPartitions OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "List of device path of the partitions, that are members of the
+         raid array."
+    ::= { jnxJVAECNRaidEntry 7 }
+
+jnxJVAECNRaidMemberDiskAtSlots OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "List of slot numbers identifying the disks, that are members of
+         the raid array."
+    ::= { jnxJVAECNRaidEntry 8 }
+
+jnxJVAECNRaidOSPath OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The raid device disk path."
+    ::= { jnxJVAECNRaidEntry 9 }
+
+   --
+   -- Compute Node Sensor Table
+   --
+
+jnxJVAECNSensorTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxJVAECNSensorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Sensors on the Compute Nodes."
+    ::= { jnxJVAENodeTables 7 }
+
+jnxJVAECNSensorEntry OBJECT-TYPE
+    SYNTAX      JnxJVAECNSensorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A Sensor."
+    INDEX { jnxJVAECNSysId, jnxJVAECNSensorId }
+    ::= { jnxJVAECNSensorTable 1 }
+
+JnxJVAECNSensorEntry ::= SEQUENCE {
+    jnxJVAECNSensorId                     INTEGER,
+    jnxJVAECNSensorType                   INTEGER,
+    jnxJVAECNSensorValue                  DisplayString,
+    jnxJVAECNSensorRange                  DisplayString,
+    jnxJVAECNSensorDesc                   DisplayString
+}
+
+jnxJVAECNSensorId OBJECT-TYPE
+    SYNTAX      INTEGER (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The unique identifier for this sensor."
+    ::= { jnxJVAECNSensorEntry 1 }
+
+jnxJVAECNSensorType OBJECT-TYPE
+    SYNTAX      INTEGER { voltage(0), temperature(1), fan(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Type of the sensor."
+    ::= { jnxJVAECNSensorEntry 2 }
+
+jnxJVAECNSensorValue OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Sensor reading."
+    ::= { jnxJVAECNSensorEntry 3 }
+
+jnxJVAECNSensorRange OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Normal operating range for the sensor, traps are raised the reading
+         is no within this range."
+    ::= { jnxJVAECNSensorEntry 4 }
+
+jnxJVAECNSensorDesc OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Description of the sensor."
+    ::= { jnxJVAECNSensorEntry 5 }
+
+
+
+   --
+   -- JVAE Node Notifications
+   --
+
+jnxJVAECNMemoryLow NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNSysMemCapacity,
+         jnxJVAECNSysMemUsed,
+         jnxJVAECNSysMemFree,
+         jnxJVAECNSysMemUsedPr,
+         jnxJVAECNSysSwapCapacity,
+         jnxJVAECNSysSwapFree
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever the free (unused) RAM goes 
+	 below threshold for this compute node."
+    ::= { jnxJVAENodeNotifications  1 }
+
+jnxJVAECNMemoryOk NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNSysMemCapacity,
+         jnxJVAECNSysMemUsed,
+         jnxJVAECNSysMemFree,
+         jnxJVAECNSysMemUsedPr,
+         jnxJVAECNSysSwapCapacity,
+         jnxJVAECNSysSwapFree
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever the free (unused) RAM recovers
+	 above threshold for this compute node and previously a
+	 jnxJVAECNMemoryLow was reported."
+    ::= { jnxJVAENodeNotifications  2 }
+
+jnxJVAECNProcessingLoadHigh NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNSysProcessingLoad
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever the overall system processing
+	 load exceeds threshold."
+    ::= { jnxJVAENodeNotifications  3 }
+
+jnxJVAECNProcessingLoadOk NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNSysProcessingLoad
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever the overall system processing
+	 load is within threshold and previously a jnxJVAECNProcessingLoadHigh
+	 was reported."
+    ::= { jnxJVAENodeNotifications  4 }
+
+jnxJVAECNProcessorLoadHigh NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNProcessorId,
+         jnxJVAECNProcessorLoad
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever the load on a processor
+	 exceeds threshold."
+    ::= { jnxJVAENodeNotifications  5 }
+
+jnxJVAECNProcessorLoadOk NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNProcessorId,
+         jnxJVAECNProcessorLoad
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever the load on a processor
+	 is within threshold and previously a jnxJVAECNProcessorLoadHigh
+	 was reported."
+    ::= { jnxJVAENodeNotifications  6 }
+
+jnxJVAECNifDown NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNifId,
+         jnxJVAECNifName,
+         jnxJVAECNifOperStatus,
+         jnxJVAECNifAdminStatus,
+         jnxJVAECNifLinkDetect
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever network interface is down."
+    ::= { jnxJVAENodeNotifications  7 }
+
+jnxJVAECNifUp NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNifId,
+         jnxJVAECNifName,
+         jnxJVAECNifOperStatus,
+         jnxJVAECNifAdminStatus,
+         jnxJVAECNifLinkDetect
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever network interface is up and
+	 previously a jnxJVAECNifDown was reported."
+    ::= { jnxJVAENodeNotifications  8 }
+
+jnxJVAECNStorageLow NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNFileSysId,
+         jnxJVAECNFileSysMountPoint,
+         jnxJVAECNFileSysSize,
+         jnxJVAECNFileSysUsed,
+         jnxJVAECNFileSysFree,
+         jnxJVAECNFileSysUsedPr
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever storage space falls below
+	 threshold."
+    ::= { jnxJVAENodeNotifications  9 }
+
+jnxJVAECNStorageOk NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNFileSysId,
+         jnxJVAECNFileSysMountPoint,
+         jnxJVAECNFileSysSize,
+         jnxJVAECNFileSysUsed,
+         jnxJVAECNFileSysFree,
+         jnxJVAECNFileSysUsedPr
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever storage space recovers and
+	 previously a jnxJVAECNStorageLow was reported."
+    ::= { jnxJVAENodeNotifications  10 }
+
+jnxJVAECNRaidError NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNRaidId,
+         jnxJVAECNRaidName,
+         jnxJVAECNRaidState,
+         jnxJVAECNRaidOSPath
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever raid array degradation or
+	 failure is detected."
+    ::= { jnxJVAENodeNotifications  11 }
+
+jnxJVAECNRaidOk NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNRaidId,
+         jnxJVAECNRaidName,
+         jnxJVAECNRaidState,
+         jnxJVAECNRaidOSPath
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever raid array recovers and
+	 previously a jnxJVAECNRaidError was reported."
+    ::= { jnxJVAENodeNotifications  12 }
+
+jnxJVAECNSensorAlert NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNSensorId,
+         jnxJVAECNSensorValue,
+         jnxJVAECNSensorType,
+         jnxJVAECNSensorRange,
+         jnxJVAECNSensorDesc
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever sensor reading is not within
+         the normal operating range."
+    ::= { jnxJVAENodeNotifications  13 }
+
+jnxJVAECNSensorOk NOTIFICATION-TYPE
+    OBJECTS {
+         jnxJVAECNSysId,
+         jnxJVAECNSensorId,
+         jnxJVAECNSensorValue,
+         jnxJVAECNSensorType,
+         jnxJVAECNSensorRange,
+         jnxJVAECNSensorDesc
+    }
+    STATUS current
+    DESCRIPTION
+        "This notification is generated whenever sensor reading recovers and
+	 previously a jnxJVAECNSensorAlert was reported."
+    ::= { jnxJVAENodeNotifications  14 }
+
+END

mibs/juniper/JUNIPER-L2ALD-MIB

@@ -0,0 +1,573 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2002-2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-L2ALD-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, 
+      NOTIFICATION-TYPE, Unsigned32, Counter64, TimeTicks, Integer32
+        FROM SNMPv2-SMI
+      DisplayString, TruthValue
+        FROM SNMPv2-TC
+      ifIndex, ifDescr
+        FROM IF-MIB 
+      jnxl2aldMibRoot
+        FROM JUNIPER-SMI
+    ;
+    
+    jnxl2aldMib MODULE-IDENTITY
+       LAST-UPDATED "201605310000Z"     -- Tue May  31 00:00:00 2016 UTC
+       ORGANIZATION "Juniper Networks, Inc."
+       CONTACT-INFO
+              "        Juniper Technical Assistance Center
+                       Juniper Networks, Inc.
+                       1133 Innovation Way
+                       Sunnyvale, CA 94089
+                       E-mail: support@juniper.net"
+       DESCRIPTION
+              "The MIB modules for L2ALD traps"
+
+    -- Revision history
+    REVISION "201501221000Z" -- Thursday January 22 10:00:00 2015 UTC
+    DESCRIPTION
+             "Added a new field jnxL2aldVlanFdbId to the table jnxL2aldVlanTable"
+
+    REVISION "201501141000Z" -- Wednesday January 14 10:00:00 2015 UTC
+    DESCRIPTION
+             "Added new table jnxL2aldVlanTable"
+
+    REVISION "201208081000Z" -- Wednesday August 08 10:00:00 2012 UTC
+    DESCRIPTION
+            "Added new notification jnxl2aldMacMoveThreshold"
+
+    REVISION "200702151000Z" -- Thursday February 15 10:00:00 2007 UTC
+    DESCRIPTION
+            "Initial Version"
+
+    REVISION    "201605310000Z" -- 31-May-16
+    DESCRIPTION
+            "Corrected type"
+
+    ::= { jnxl2aldMibRoot 1 }
+
+    jnxl2aldNotification OBJECT IDENTIFIER ::= { jnxl2aldMib 0 }
+
+    jnxl2aldObjects OBJECT IDENTIFIER ::= { jnxl2aldMib 1 }
+    
+    jnxl2aldInterfaceTable  OBJECT-TYPE
+        SYNTAX             SEQUENCE OF Jnxl2aldEntry
+        MAX-ACCESS         not-accessible
+        STATUS             current
+        DESCRIPTION 
+              "L2ALD objects for interface MAC limit."  
+    ::= { jnxl2aldObjects 1 }
+    
+    jnxl2aldEntry    OBJECT-TYPE
+        SYNTAX       Jnxl2aldEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION  
+              "An entry in l2aldInterfaceTable."
+    INDEX { ifIndex }          
+    ::= { jnxl2aldInterfaceTable 1 }          
+
+    Jnxl2aldEntry ::= 
+       SEQUENCE {
+          jnxl2aldIntfLogicalRouter  DisplayString,
+          jnxl2aldIntfRoutingInst    DisplayString,
+          jnxl2aldIntfBridgeDomain   DisplayString,
+          jnxl2aldIntfMacLimit       Unsigned32,
+          jnxl2aldIntfMacPinningIntf DisplayString,
+          jnxl2aldIntfDiscardIntf    DisplayString
+    }   
+ 
+-- Entry definitions for the table above
+ 
+    jnxl2aldIntfLogicalRouter OBJECT-TYPE
+        SYNTAX                DisplayString
+        MAX-ACCESS            accessible-for-notify
+        STATUS                current
+        DESCRIPTION
+              "The logical router string for interface table."
+    ::= { jnxl2aldEntry 1 }
+
+    jnxl2aldIntfRoutingInst OBJECT-TYPE
+        SYNTAX              DisplayString
+        MAX-ACCESS          accessible-for-notify
+        STATUS              current
+        DESCRIPTION  
+             "The routing instance string for interface table."
+    ::= { jnxl2aldEntry 2 }
+    
+    jnxl2aldIntfBridgeDomain OBJECT-TYPE
+        SYNTAX               DisplayString
+        MAX-ACCESS           accessible-for-notify
+        STATUS               current
+        DESCRIPTION
+              "The bridge domain string for interface table."
+    ::= { jnxl2aldEntry 3 } 
+
+    jnxl2aldIntfMacLimit OBJECT-TYPE
+        SYNTAX           Unsigned32
+        MAX-ACCESS       accessible-for-notify
+        STATUS           current
+        DESCRIPTION
+             "The MAC limit count for the interface table."
+    ::= { jnxl2aldEntry 4 }
+
+    jnxl2aldIntfMacPinningIntf OBJECT-TYPE
+        SYNTAX               DisplayString
+        MAX-ACCESS           accessible-for-notify
+        STATUS               current
+        DESCRIPTION
+              "The interface on which MAC Pinning is enabled."
+    ::= { jnxl2aldEntry 5 }
+
+    jnxl2aldIntfDiscardIntf OBJECT-TYPE
+        SYNTAX               DisplayString
+        MAX-ACCESS           accessible-for-notify
+        STATUS               current
+        DESCRIPTION
+              "The interface on which MAC is discarded due to MAC Pinning."
+    ::= { jnxl2aldEntry 6 }
+
+
+-- Objects defined below are scalar and for a different trap 
+-- they are different then the table definitions above
+
+    jnxl2aldRoutingInst OBJECT-TYPE
+        SYNTAX          DisplayString
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION     
+              "The Routing instance string for routing mac limit trap." 
+    ::= { jnxl2aldObjects 2 }
+
+    jnxl2aldBridgeDomain OBJECT-TYPE
+        SYNTAX           DisplayString
+        MAX-ACCESS       accessible-for-notify
+        STATUS           current
+        DESCRIPTION      
+              "The bridge domain string for routing mac limit trap."
+    ::= { jnxl2aldObjects 3 }
+
+    jnxl2aldLogicalRouter OBJECT-TYPE
+        SYNTAX            DisplayString
+        MAX-ACCESS        accessible-for-notify
+        STATUS            current
+        DESCRIPTION 
+             "The logical router string for routing mac limit trap."
+    ::= { jnxl2aldObjects 4 }
+
+    jnxl2aldMacLimit     OBJECT-TYPE
+       SYNTAX            Unsigned32
+       MAX-ACCESS        accessible-for-notify
+       STATUS            current
+       DESCRIPTION
+              "The mac limit count for routing instance."
+    ::= { jnxl2aldObjects 5 }          
+
+    jnxl2aldGbMacLimit OBJECT-TYPE
+       SYNTAX              Unsigned32
+       MAX-ACCESS          accessible-for-notify
+       STATUS              current
+       DESCRIPTION
+              "The mac limit count for the system."
+    ::= { jnxl2aldObjects 6 }
+
+     jnxl2aldMacAdress OBJECT-TYPE
+        SYNTAX            DisplayString
+        MAX-ACCESS        accessible-for-notify
+        STATUS            current
+        DESCRIPTION
+             "The offending mac causing mac move threshold trap."
+    ::= { jnxl2aldObjects 7 }
+
+----------------------------------------------------------------------------
+-- Juniper MAC Notification MIB object definitions
+----------------------------------------------------------------------------
+
+    jnxL2aldMacNotificationMIBObjects OBJECT IDENTIFIER
+    ::= {jnxl2aldMib 2 }
+
+    jnxL2aldMacNotificationMIBGlobalObjects     OBJECT IDENTIFIER
+    ::= {jnxL2aldMacNotificationMIBObjects 1 }
+
+-- Juniper Mac Notification Global Group
+
+jnxL2aldMacGlobalFeatureEnabled  OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates whether the MAC notification feature is currently
+        running in the device.
+
+        Setting this object to false(2) disables the MAC notification
+        feature globally.
+
+        Setting this object to true(1) will start the MAC notification
+        feature running in the device. If the feature is already
+        running, setting to true(1) has no effect."
+	::= { jnxL2aldMacNotificationMIBGlobalObjects 1 }
+
+jnxL2aldMacNotificationInterval  OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..4294967295)
+    UNITS         "seconds"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object specifies the maximum interval of time between
+        jnxL2aldMacChangedNotifications being generated by the device.
+        If the value of jnxNotificationsEnabled is true(1), the
+        device will send out the generated jnxL2aldMacChangedNotifications
+        and archive the MAC change notification events in the
+        jnxMacHistoryTable. If the value of jnxNotificationEnabled is
+        false(2), the device will not send out the generated
+        jnxL2aldMacChangedNotifications but it will archive these events
+        in the jnxMacHistoryTable.
+
+        If the value of this object is equal to 0, the device will
+        generate jnxL2aldMacChangedNotifications and archive the MAC
+        change notification events in the jnxMacHistoryTable as soon as
+        there is MAC address learnt or removed by the device.
+
+        If the value of this object is greater than 0, the device will
+        wait for a period of time equal to the value of this object
+        before generate the jnxL2aldMacChangedNotifications and archive
+        the MAC change notification events in the jnxMacHistoryTable."
+    DEFVAL { 30 }
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 2 }
+
+jnxL2aldMacAddressesLearnt OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the number of MAC addresses learnt by the
+        device."
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 3 }
+
+jnxL2aldMacAddressesRemoved OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the number of MAC addresses removed from the
+        forwarding database."
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 4 }
+
+jnxL2aldMacNotificationsEnabled OBJECT-TYPE
+     SYNTAX          TruthValue
+     MAX-ACCESS      read-only
+     STATUS          current
+     DESCRIPTION
+         "Indicates whether jnxL2aldMacChangedNotification notifications
+          will or will not be sent when there are MAC addresses
+          learnt or removed from the device's forwarding database.
+          Disabling notifications does not prevent the MAC address
+          info from being added to the jnxMacHistoryTable."
+     DEFVAL { false }
+     ::= { jnxL2aldMacNotificationMIBGlobalObjects 5 }
+
+jnxL2aldMacNotificationsSent OBJECT-TYPE
+    SYNTAX         Counter64
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+        "Indicates the number of jnxl2aldMacChangedNotifications sent out
+        by the device."
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 6 }
+
+jnxL2aldMacHistTableMaxLength OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..500)
+    UNITS           "entries"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The upper limit on the number of entries that the
+        jnxMacHistoryTable may contain.  A value of 0 will
+        prevent any history from being retained. When this
+        table is full, the oldest entry will be deleted and
+        a new one will be created."
+    DEFVAL  { 256 }
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 7 }
+
+jnxL2aldMacHistoryTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF JnxL2aldMacHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table will archive the MAC change notification events
+        generated by this device. The MAC change notification
+        events are archived here even if jnxMacChangesNotifications
+        are not actually sent."
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 8 }
+
+jnxL2aldMacHistoryEntry OBJECT-TYPE
+    SYNTAX     JnxL2aldMacHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A MAC change notification message that was previously
+        generated by this device.  Each entry is indexed by a message
+        index."
+    INDEX   { jnxL2aldHistIndex }
+    ::= { jnxL2aldMacHistoryTable 1 }
+
+JnxL2aldMacHistoryEntry ::=
+    SEQUENCE {
+        jnxL2aldHistIndex
+                Unsigned32,
+        jnxL2aldHistMacChangedMsg
+                OCTET STRING,
+        jnxL2aldHistTimestamp
+                TimeTicks
+    }
+
+jnxL2aldHistIndex OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An index that uniquely identifies a MAC change notification
+        event previously generated by the device. This index starts at
+        1 and increases by one when a MAC change notification is
+        generated.  When it reaches the maximum value, the agent wraps
+        the value back to 1."
+    ::= { jnxL2aldMacHistoryEntry 1 }
+
+jnxL2aldHistMacChangedMsg OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(1..512))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object contains the information of a MAC change
+        notification event. It consists of several tuples packed
+        together in the format of '<tuple1><tuple2>...'.
+
+        Each tuple consist of 13 octets in the format of
+        '<operation><VLAN INDEX><MAC><dot1dBasePort><VLAN TAG>' where
+
+        <operation> is of size 1 octet and supports the following values
+          0 - End of MIB object.
+          1 - MAC learnt.
+          2 - MAC removed.
+          3 - MAC updated.
+
+        <VLAN INDEX> is the index of the VLAN which the MAC address is
+        belonged to and has size of 2 octet.
+        
+        <MAC> is the Layer2 Mac Address and has size of 6 octets.
+
+        <dot1dBasePort> is the value of dot1dBasePort for the
+        interface from which the MAC address is learnt and has size
+        of 2 octets.
+
+        <VLAN TAG> is the tag of the VLAN which the MAC address is
+        belonged to and has size of 2 octet."
+        
+    ::= { jnxL2aldMacHistoryEntry 2 }
+
+jnxL2aldHistTimestamp  OBJECT-TYPE
+    SYNTAX          TimeTicks
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The value of sysUpTime when the jnxL2aldMacChangedNotification
+        containing the information denoted by the jnxHistMacChangedMsg
+        object in this entry was generated."
+    ::= { jnxL2aldMacHistoryEntry 3 }
+
+jnxL2aldMacAddressesUpdated OBJECT-TYPE
+    SYNTAX        Counter64
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the number of MAC addresses updated by the
+        device."
+    ::= { jnxL2aldMacNotificationMIBGlobalObjects 9 }
+
+------------------------------------------------------------------------------------------
+-- Juniper Vlan MIB Definitions
+------------------------------------------------------------------------------------------
+
+    jnxL2aldVlanMIBObjects OBJECT IDENTIFIER
+    ::= {jnxl2aldMib 3 }
+
+-- VLAN Configuration
+
+jnxL2aldVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxL2aldVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of VLAN names and characteristics."
+    ::= { jnxL2aldVlanMIBObjects 1 }
+
+jnxL2aldVlanEntry OBJECT-TYPE
+    SYNTAX      JnxL2aldVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table entry containing VLAN names and characteristics."
+    INDEX   { jnxL2aldVlanID }
+    ::= { jnxL2aldVlanTable 1 }
+
+JnxL2aldVlanEntry ::=
+    SEQUENCE {
+        jnxL2aldVlanID                 Unsigned32,
+        jnxL2aldVlanName               DisplayString,
+        jnxL2aldVlanTag                Integer32,
+        jnxL2aldVlanType               INTEGER,
+        jnxL2aldVlanFdbId              Unsigned32
+    }
+
+jnxL2aldVlanID OBJECT-TYPE
+    SYNTAX      Unsigned32(1..4094)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This is the locally significant ID that is used internally by this
+         device to reference this VLAN."
+    ::= { jnxL2aldVlanEntry 1 }
+
+jnxL2aldVlanName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..255))
+    MAX-ACCESS  read-only 
+    STATUS      current
+    DESCRIPTION
+       "Vlan name is the textual name and this is the identifier
+        that the user of a configuration utility will use."
+    ::= {  jnxL2aldVlanEntry 2 }
+
+jnxL2aldVlanTag OBJECT-TYPE
+    SYNTAX      Integer32(1..4094)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This is the locally significant ID that is used internally by this
+        device to reference this VLAN."
+    ::= { jnxL2aldVlanEntry 3 }
+
+jnxL2aldVlanType OBJECT-TYPE
+    SYNTAX      INTEGER {
+        static (1),
+        dynamic(2)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The vlan type can be
+            Static (1)
+            Dynamic(2)"
+    DEFVAL { 1 }
+    ::= { jnxL2aldVlanEntry 4 }
+
+jnxL2aldVlanFdbId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The identity of the Filtering Database dot1qFdbTable (A table that
+        contains configuration and control information for each Filtering
+        Database currently operating on this device)"
+    ::= { jnxL2aldVlanEntry 5 }
+
+------------------------------------------------------------------------------------------
+-- Trap definitions
+------------------------------------------------------------------------------------------
+
+    jnxl2aldRoutingInstMacLimit NOTIFICATION-TYPE
+        OBJECTS    { jnxl2aldLogicalRouter,
+                     jnxl2aldRoutingInst,
+                     jnxl2aldBridgeDomain,
+                     jnxl2aldMacLimit
+        }
+        STATUS     current
+        DESCRIPTION
+                 "This notification is generated when the MAC limit for
+                  given routing instance (jnxl2aldRoutingInst) is reached. 
+                  This trap is send only once we exceed the limit value."
+    ::= { jnxl2aldNotification 1 }          
+                  
+    jnxl2aldInterfaceMacLimit NOTIFICATION-TYPE
+        OBJECTS    { jnxl2aldIntfLogicalRouter, 
+                     jnxl2aldIntfRoutingInst,
+                     jnxl2aldIntfBridgeDomain,
+                     ifDescr,
+                     jnxl2aldIntfMacLimit
+        }
+        STATUS     current
+        DESCRIPTION
+                 "This notification is generated when the MAC limit for 
+                  the given physical interface (jnxl2aldInterfaceMacLimit) is reached.
+                  This trap is send only once we exceed the limit value."
+    ::= { jnxl2aldNotification 2 }
+
+    jnxl2aldGlobalMacLimit NOTIFICATION-TYPE
+         OBJECTS   {  jnxl2aldGbMacLimit 
+         }
+         STATUS   current
+         DESCRIPTION
+                 "This notification is generated when the MAC limit for
+                  the entire system is reached.
+                  This trap is send only once we exceed the limit value."
+     ::= { jnxl2aldNotification 3 }
+
+    jnxl2aldMacMoveThreshold NOTIFICATION-TYPE
+        OBJECTS    { jnxl2aldIntfLogicalRouter,
+                     jnxl2aldIntfRoutingInst,
+                     jnxl2aldIntfBridgeDomain,
+                     ifDescr,
+                     jnxl2aldMacAdress
+        }
+        STATUS     current
+        DESCRIPTION
+                 "This notification is generated when a mac move reaches threshold.
+                  The given interface (ifDescr) will be blocked for the Bridge
+                  Domain(jnxl2aldIntfBridgeDomain). This trap is send only once when
+                  mac move count exceeds the threshold for the Mac(jnxl2aldMacAdress)."
+    ::= { jnxl2aldNotification 4 }
+
+    jnxL2aldMacChangedNotification NOTIFICATION-TYPE
+	OBJECTS { jnxL2aldHistMacChangedMsg, jnxL2aldHistTimestamp }
+    STATUS  current
+    DESCRIPTION
+        "This notification is generated when there is enough MAC
+        address information to fully occupy a maximum size SNMP trap
+        message. This notification is also generated when there
+        is at least one MAC address changed or removed and the amount
+        of time elapsed from the previous notification is greater
+        than the maximum wait time denoted by
+        jnxNotificationInterval object.
+
+        If there are more MAC addresses information than can fit into
+        one cmmHistTrapContent object, then multiple notifications
+        will be generated."
+    ::= { jnxl2aldNotification 5 }
+
+    jnxl2aldMacPinningdiscard NOTIFICATION-TYPE
+        OBJECTS    { jnxl2aldIntfLogicalRouter,
+                     jnxl2aldIntfRoutingInst,
+                     jnxl2aldIntfBridgeDomain,
+                     jnxl2aldMacAdress,
+                     jnxl2aldIntfMacPinningIntf,
+                     jnxl2aldIntfDiscardIntf
+        }
+        STATUS     current
+        DESCRIPTION
+                 "This notification is generated for discarding packets in a bridge domain over an
+                  IFL for MACs when learned over MAC pinning enabled interface and same MACs are
+                  also seen over any other interfaces in the same bridge domain.
+                  This trap is generated in configured interval of time when packets are discarded
+                  over an IFL continuously."
+    ::= { jnxl2aldNotification 6 }
+
+END

mibs/juniper/JUNIPER-L2CP-FEATURES-MIB

@@ -0,0 +1,428 @@
+
+JUNIPER-L2CP-FEATURES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+    OBJECT-TYPE, MODULE-IDENTITY,
+    NOTIFICATION-TYPE FROM SNMPv2-SMI
+    DisplayString, TruthValue  FROM SNMPv2-TC
+    InterfaceIndex, ifIndex  FROM IF-MIB
+    dot1dStpPort, dot1dStpPortEntry  FROM BRIDGE-MIB
+    jnxL2cpMibRoot FROM JUNIPER-SMI;
+
+jnxL2cpFeaturesMIB MODULE-IDENTITY
+    LAST-UPDATED "201609230000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+        "Juniper Technical Assistance Center
+         Juniper Networks, Inc.
+         1133 Innovation Way
+         Sunnyvale, CA 94089
+         E-mail: support@juniper.net"
+    DESCRIPTION
+        "This mib module is for Juniper Networks Proprietory
+         Layer 2 control protocol (L2CP) features"
+
+    REVISION     "201206250000Z"    -- June 25, 2012
+    DESCRIPTION  "Modifying max access for LacpTimeOut trap objects."
+
+    REVISION     "201208150000Z"    -- Aug 15, 2012
+    DESCRIPTION  "Added new mib jnxLacpAggTimeout."
+
+    REVISION     "201006110000Z"    -- June 11, 2010
+    DESCRIPTION  "Added new trap jnxLacpTimeOut."
+
+    REVISION     "201609230000Z"    -- Sep 23, 2016
+    DESCRIPTION  "Adding  jnxL2cpLoopDetectObjects"
+
+    ::= { jnxL2cpMibRoot 1 }
+
+
+jnxL2cpObjects  OBJECT IDENTIFIER ::=  { jnxL2cpFeaturesMIB 1 }
+
+jnxL2cpNotifications  OBJECT IDENTIFIER ::=  { jnxL2cpFeaturesMIB 2 }
+
+jnxL2cpStpProtectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 1 }
+
+jnxL2cpBpduProtectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 2 }
+
+jnxDot1dStpPortProtectTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxDot1dStpPortProtectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the jnxDot1dStp Port Table for providing enterprise specific
+         extensions for Root Protect and Loop Protect to the corresponding 
+         dot1dStpPortTable entry."
+   ::= { jnxL2cpStpProtectObjects 1 }
+
+jnxDot1dStpPortProtectEntry OBJECT-TYPE
+    SYNTAX      JnxDot1dStpPortProtectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the jnxDot1dStpPortProtectTable.  This essentially
+         augments the dot1dStpPortTable with additional objects."
+    AUGMENTS    { dot1dStpPortEntry }
+    ::= { jnxDot1dStpPortProtectTable 1 }
+
+JnxDot1dStpPortProtectEntry ::=
+    SEQUENCE {
+        jnxDot1dStpPortRootProtectEnabled  TruthValue,
+        jnxDot1dStpPortRootProtectState    INTEGER,    
+        jnxDot1dStpPortLoopProtectEnabled  TruthValue,
+        jnxDot1dStpPortLoopProtectState    INTEGER    
+    }
+
+jnxDot1dStpPortRootProtectEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A Boolean value set by management indicating whether Root protect 
+         functionality is enabled on the port. If TRUE causes the Port not
+         to be selected as Root Port, even it has the best spanning tree 
+         priority vector. This parameter should be FALSE by default. "
+    ::= { jnxDot1dStpPortProtectEntry 1 }
+
+jnxDot1dStpPortRootProtectState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    no-error (0),
+                    root-prevented (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether the port was prevented from being a root port.
+         This parameter will always return 'no-error (0)' if 
+         jnxDot1dStpPortRootProtectEnabled is FALSE. "
+    ::= { jnxDot1dStpPortProtectEntry 2 }
+
+jnxDot1dStpPortLoopProtectEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A Boolean value set by management indicating whether Loop protect 
+         functionality is enabled on the port. If TRUE causes the Port not
+         to be selected as Designated Port when the received superior BPDU 
+         is aged out. This parameter should be FALSE by default. "
+    ::= { jnxDot1dStpPortProtectEntry 3 }
+
+jnxDot1dStpPortLoopProtectState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    no-error (0),
+                    loop-prevented (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether a potential Loop was prevented on the port
+         This parameter will always return 'no-error (0)' if 
+         jnxDot1dStpPortLoopProtectEnabled is FALSE. "
+    ::= { jnxDot1dStpPortProtectEntry 4 }
+
+jnxL2cpBpduProtectPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxL2cpBpduProtectPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a Port Table for BPDU Protect information. This contains 
+         only those ports on which BPDU Protect can be configured."
+    ::= { jnxL2cpBpduProtectObjects 1 }
+
+jnxL2cpBpduProtectPortEntry OBJECT-TYPE
+    SYNTAX      JnxL2cpBpduProtectPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the jnxL2cpBpduProtectPortTable.  A list
+         containing BPDU Protect information for each Port."
+    INDEX  { ifIndex }
+    ::= { jnxL2cpBpduProtectPortTable 1 }
+
+JnxL2cpBpduProtectPortEntry ::=
+    SEQUENCE {
+        jnxL2cpBpduProtectPortEnabled  TruthValue,
+        jnxL2cpPortBpduError           INTEGER
+    }
+
+jnxL2cpBpduProtectPortEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A Boolean value set by management indicating whether BPDU protect 
+         functionality is enabled on the port. If TRUE causes the Port to be
+         disabled (link down) upon receipt of a BPDU. This parameter should be
+         FALSE by default. "
+    ::= { jnxL2cpBpduProtectPortEntry 1 }
+
+jnxL2cpPortBpduError OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    no-error (0),
+                    detected (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether a BPDU was received on the port.
+         This parameter will always return 'no-error (0)' if 
+         jnxL2cpBpduProtectPortEnabled is FALSE. "
+    ::= { jnxL2cpBpduProtectPortEntry 2 }
+
+jnxL2cpBpduProtectDisableTimeout OBJECT-TYPE
+    SYNTAX      INTEGER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Returns the value of time (in seconds) after which a port on
+         which BPDU error was detected will be re-enabled. A returned
+         value of 0 indicates that port will not be re-enabled 
+         automatically."
+    ::= { jnxL2cpBpduProtectObjects 2 }
+
+jnxL2cpProtectTraps  OBJECT IDENTIFIER ::= { jnxL2cpNotifications 0 }
+
+jnxPortRootProtectStateChangeTrap NOTIFICATION-TYPE
+    OBJECTS {
+        jnxDot1dStpPortRootProtectState
+    }
+    STATUS             current
+    DESCRIPTION
+        "Generated when the ports Root-protect state (no-error or root-prevented) 
+         changes."
+   ::= { jnxL2cpProtectTraps 1 }
+
+jnxPortLoopProtectStateChangeTrap NOTIFICATION-TYPE
+    OBJECTS {
+        jnxDot1dStpPortLoopProtectState
+    }
+    STATUS             current
+    DESCRIPTION
+        "Generated when the ports Loop-protect state (no-error or loop-prevented) 
+         changes."
+   ::= { jnxL2cpProtectTraps 2 }
+
+jnxPortBpduErrorStatusChangeTrap NOTIFICATION-TYPE
+    OBJECTS {
+        jnxL2cpPortBpduError
+    }
+    STATUS             current
+    DESCRIPTION
+        "Generated when the ports BPDU error state (no-error or detected) 
+         changes."
+   ::= { jnxL2cpProtectTraps 3 }
+
+    -- ***************************************************************
+    --  Lacp Traps / Notifications Section
+    -- ***************************************************************
+
+    -- Lacp Notification Variables/Objects
+
+    jnxLacpNotifyVars OBJECT IDENTIFIER ::=  { jnxL2cpObjects 3 }
+
+    jnxLacpAggTimeout OBJECT IDENTIFIER ::=  { jnxL2cpObjects 4 }
+
+    jnxLacpNotificationsPrefix OBJECT IDENTIFIER ::= { jnxL2cpNotifications 1 }
+
+LacpState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The Actor and Partner State values from the LACPDU."
+    SYNTAX      BITS {
+                    lacpActivity(0),
+                    lacpTimeout(1),
+                    aggregation(2),
+                    synchronization(3),
+                    collecting(4),
+                    distributing(5),
+                    defaulted(6),
+                    expired(7)
+                }
+
+    jnxLacpInterfaceName OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Lacp member interface."
+        ::= { jnxLacpNotifyVars 1 }
+
+    jnxLacpifIndex  OBJECT-TYPE 
+        SYNTAX      InterfaceIndex 
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current 
+        DESCRIPTION 
+            "Snmp ifIndex of member interface." 
+        ::= { jnxLacpNotifyVars 2 } 
+
+    jnxLacpAggregateInterfaceName OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Lacp Aggregate interface."
+        ::= { jnxLacpNotifyVars 3 }
+
+    jnxLacpAggregateifIndex  OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Snmp ifIndex of Aggregator."
+        ::= { jnxLacpNotifyVars 4 } 
+
+    jnxLacpAggPortActorOperState OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   accessible-for-notify
+        STATUS       current
+        DESCRIPTION
+            "Port actor operational state."
+        ::= { jnxLacpNotifyVars 5 }
+
+    jnxLacpTimeOut NOTIFICATION-TYPE
+        OBJECTS         { jnxLacpInterfaceName,
+                          jnxLacpifIndex,
+                          jnxLacpAggregateInterfaceName,
+                          jnxLacpAggregateifIndex,
+                          jnxLacpAggPortActorOperState
+                        }
+        STATUS          current
+        DESCRIPTION
+            "Lacp times out"
+        ::= { jnxLacpNotificationsPrefix  1 }
+
+dot3adAggPortTimeoutTable OBJECT-TYPE  
+    SYNTAX      SEQUENCE OF Dot3adAggPortTimeoutEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains Link Aggregation Timeout information
+        about a port that is associated with this device.
+        A row appears in this table for each physical port."
+    REFERENCE
+        "IEEE 802.3"
+    ::= { jnxLacpAggTimeout 1 }
+
+dot3adAggPortTimeoutEntry OBJECT-TYPE
+    SYNTAX      Dot3adAggPortTimeoutEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of Link Aggregation Control Protocol timeout information
+        for a port on this device."
+    INDEX { ifIndex }
+    ::= { dot3adAggPortTimeoutTable 1 }
+    
+Dot3adAggPortTimeoutEntry ::=
+    SEQUENCE {
+        dot3adInterfaceName
+            DisplayString,
+        dot3adOperState
+            LacpState,
+        dot3adAggname
+            DisplayString,
+        dot3adInterfaceTimeout
+            TimeTicks
+    }
+
+dot3adInterfaceName OBJECT-TYPE
+    SYNTAX       DisplayString 
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Physical port that is associated with
+        Aggregation Port. This value is read-only."
+    REFERENCE
+        "IEEE 802.3"
+    ::= { dot3adAggPortTimeoutEntry 1 }
+
+dot3adOperState OBJECT-TYPE
+    SYNTAX       LacpState
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "A string of 8 bits, corresponding to the current
+        operational values of Actor_State as transmitted by the
+        Actor in LACPDUs. The bit allocations are as defined in
+        30.7.2.1.20. This attribute value is read-only."
+    REFERENCE
+        "IEEE 802.3 Subclause 30.7.2.1.21"
+    ::= { dot3adAggPortTimeoutEntry 2 }
+
+dot3adAggname OBJECT-TYPE
+    SYNTAX       DisplayString
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Aggregation Port where Physical port 
+        is associated with. This value is read-only."
+    REFERENCE
+        "IEEE 802.3"
+    ::= { dot3adAggPortTimeoutEntry 3 }
+
+dot3adInterfaceTimeout OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "This object represents the time elapsed in seconds
+         since lacp experienced timeout.
+         This value is read-only."
+    REFERENCE
+        "IEEE 802.3"
+    ::= { dot3adAggPortTimeoutEntry 4 }
+
+jnxL2cpLoopDetectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 5 }
+
+jnxL2cpLoopDetectPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JnxL2cpLoopDetectPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a Port Table for Loop Detect information. This contains
+         only those ports on which Loop Detect is configured."
+    ::= { jnxL2cpLoopDetectObjects 1 }
+
+jnxL2cpLoopDetectPortEntry OBJECT-TYPE
+    SYNTAX      JnxL2cpLoopDetectPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the jnxL2cpLoopDetectPortTable.  A list
+         containing Loop Detect information for each Port."
+    INDEX  { ifIndex }
+    ::= { jnxL2cpLoopDetectPortTable 1 }
+
+JnxL2cpLoopDetectPortEntry ::=
+    SEQUENCE {
+        jnxL2cpLoopDetectPortEnabled  TruthValue,
+        jnxL2cpLoopDetectPduError INTEGER
+    }
+
+jnxL2cpLoopDetectPortEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A Boolean value set by management indicating whether Loop Detect
+         functionality is enabled on the port. If TRUE causes the Port to be
+         disabled (link down) upon receipt of a Loop Detect PDU. This parameter should be
+         FALSE by default. "
+    ::= { jnxL2cpLoopDetectPortEntry 1 }
+
+jnxL2cpLoopDetectPduError OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    no-error (0),
+                    detected (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether a Loop Detect PDU was received on the port.
+         This parameter will always return 'no-error (0)' if
+         jnxL2cpLoopDetectPortEnabled is FALSE. "
+    ::= { jnxL2cpLoopDetectPortEntry 2 }
+
+END

mibs/juniper/JUNIPER-LDP-MIB

@@ -0,0 +1,340 @@
+--
+-- Juniper Enterprise Specific MIB:LDP MIB Extension
+-- 
+-- Copyright (c) 2002-2010, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-LDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+    IpAddress, Counter64, Unsigned32
+        FROM SNMPv2-SMI
+    DisplayString
+        FROM SNMPv2-TC
+    InterfaceIndex, InterfaceIndexOrZero
+        FROM IF-MIB
+    jnxMibs, jnxLdpTraps
+        FROM JUNIPER-SMI
+    jnxMplsLdpSesState
+        FROM JUNIPER-MPLS-LDP-MIB
+    mplsVpnVrfName
+	FROM MPLS-VPN-MIB
+    InetAddressType, InetAddress, InetAddressPrefixLength
+        FROM INET-ADDRESS-MIB;
+
+jnxLdp MODULE-IDENTITY
+    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:54 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+                     Juniper Networks, Inc.
+                     1133 Innovation Way
+                     Sunnyvale, CA 94089
+                     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "The MIB modules extends the LDP mib draft."
+
+    REVISION     "200408100000Z"    -- Aug 10, 2004
+    DESCRIPTION  "Added 'jnxLdpInstanceName' to the jnxLdpLspUp and 
+		  jnxLdpLspDown trap."
+
+    REVISION     "200406230000Z"    -- Jun 23, 2004
+    DESCRIPTION  "Modified description of jnxLdpSesDownIf and jnxLdpSesDown."
+
+    REVISION     "200406220000Z"    -- Jun 22, 2004
+    DESCRIPTION  "Added 'jnxLdpSesUpIf' to the jnxLdpSesUp trap."
+
+    REVISION      "200201100000Z" 
+    DESCRIPTION
+               "Initial revision."
+    ::= { jnxMibs 14 }
+
+
+
+    jnxLdpTrapVars      OBJECT IDENTIFIER ::= { jnxLdp 1 }
+
+--
+-- define branches for jnx ldp traps
+--
+-- Note that we need jnxLdpTrapPrefix with the 0
+-- sub-identifier to make this MIB translate to
+-- an SNMPv1 format in a reversible way. For example
+-- it is needed for proxies that convert SNMPv1 traps
+-- to SNMPv2 notifications without MIB knowledge.
+--   
+
+    jnxLdpTrapPrefix    OBJECT IDENTIFIER ::= { jnxLdpTraps 0 }
+
+jnxLdpLspFec OBJECT-TYPE
+    SYNTAX        IpAddress
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"The LSP FEC in IP address format."
+    ::= { jnxLdpTrapVars 1 }
+
+jnxLdpRtrid OBJECT-TYPE
+    SYNTAX        IpAddress
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"The router id of the sending router."
+    ::= { jnxLdpTrapVars 2 }
+
+jnxLdpLspDownReason OBJECT-TYPE
+    SYNTAX        INTEGER { 
+                    topologyChanged (1), 
+		    receivedWithdrawl (2),
+		    neighborDown (3),
+		    filterChanged (4),
+		    bfdSessionDown (5),
+		    unknown (6),
+		    lspingDown (7) }
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"The reason why the LSP went down. Can be one of the following:
+	the topology changed, the neighbor withdrew the label, 
+	the neighbor went down, the filter changed, the BFD session
+	went down, lsping down, or the reason is unknown."
+    ::= { jnxLdpTrapVars 3 }
+
+jnxLdpSesDownReason OBJECT-TYPE
+    SYNTAX        INTEGER { 
+                    unknown (0),
+                    holdExpired (1), 
+		    connectionExpired (2),
+		    allAdjacenciesDown (3),
+		    badTLV (4),
+		    badPDU (5),
+		    connectionError (6),
+		    connectionReset (7),
+		    peerSentNotification (8),
+		    unexpectedEOF (9),
+		    authenticationChanged (10),
+		    initError (11),
+		    gracefulRestartAbort (12),
+		    cliCommand (13),
+		    gracefulRestartChanged (14) }
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"The reason why the session transitioned to nonexistent state. 
+	Can be one of the following:
+	unknown reason, hold time expired, connection time expired, 
+	all adjacencies down,  received bad tlv, received bad pdu, 
+	connectionn error, connection reset, received notification from peer, 
+	received unexpected end-of-file, authentication key was changed, 
+	error during initialization, graceful restart was aborted or cli
+	command."
+    ::= { jnxLdpTrapVars 4 }
+
+jnxLdpSesDownIf OBJECT-TYPE
+    SYNTAX        InterfaceIndexOrZero
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"This variable is the snmp index of the interface relevant to the 
+	session-down  event. If no interface can be correlated to the 
+	session-down, then it is the interface associated with one of 
+	the neighbors."
+    ::= { jnxLdpTrapVars 5 }
+
+jnxLdpLspFecLen OBJECT-TYPE
+    SYNTAX        INTEGER (0..32)
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"The length in bits of the LSP FEC prefix."
+    ::= { jnxLdpTrapVars 6 }
+
+jnxLdpSesUpIf OBJECT-TYPE
+    SYNTAX        InterfaceIndexOrZero
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+	"This variable is the interface index of one of the neighbors
+	associated with this session."
+    ::= { jnxLdpTrapVars 7 }
+
+jnxLdpInstanceName OBJECT-TYPE
+    SYNTAX        mplsVpnVrfName
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION   "Name of the VPN instance."
+    ::= { jnxLdpTrapVars 8 }
+
+
+jnxLdpLspUp NOTIFICATION-TYPE
+    OBJECTS  { jnxLdpLspFec, jnxLdpRtrid, jnxLdpLspFecLen, jnxLdpInstanceName}
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when an LSP comes up."
+    ::= { jnxLdpTrapPrefix 1 }
+
+jnxLdpLspDown NOTIFICATION-TYPE
+    OBJECTS  { jnxLdpLspFec, jnxLdpRtrid, jnxLdpLspDownReason, jnxLdpLspFecLen,
+	       jnxLdpInstanceName }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the LSP goes down."
+    ::= { jnxLdpTrapPrefix 2 }
+
+jnxLdpSesUp NOTIFICATION-TYPE
+    OBJECTS  { jnxMplsLdpSesState,
+               jnxLdpSesUpIf}
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the value of 'jnxMplsLdpSesState'
+	 enters the 'operational(5) state."
+    ::= { jnxLdpTrapPrefix 3 }
+
+jnxLdpSesDown NOTIFICATION-TYPE
+    OBJECTS  { jnxMplsLdpSesState, 
+               jnxLdpSesDownReason,
+	       jnxLdpSesDownIf}
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the value of 'jnxMplsLdpSesState'
+	leaves the 'operational(5) state. The value of jnxLdpSesDownIf is 
+	one of the neighbor's interface. It is the interface associated with
+	the last neighbor when jnxLdpSesDownReason is allAdjacenciesDown (3)."
+    ::= { jnxLdpTrapPrefix 4 }
+
+
+
+jnxLdpStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF JnxLdpStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION "Table of statistics of Ldp FECs."
+
+    ::= { jnxLdp 2 }
+
+jnxLdpStatsEntry OBJECT-TYPE
+    SYNTAX     JnxLdpStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entry containing statistics information about a particular
+         LDP FEC."
+    INDEX { jnxLdpInstanceId,
+	    jnxLdpFecType,
+	    jnxLdpFec,
+	    jnxLdpFecLength }
+    ::= { jnxLdpStatsTable 1 }
+
+JnxLdpStatsEntry ::=
+    SEQUENCE {
+	jnxLdpInstanceId     	Unsigned32,
+	jnxLdpFecType	 	InetAddressType,
+	jnxLdpFec	    	InetAddress,
+	jnxLdpFecLength		InetAddressPrefixLength,
+	jnxLdpFecStatisticsStatus INTEGER,
+	jnxLdpIngressOctets  	Counter64,
+        jnxLdpIngressPackets 	Counter64,
+	jnxLdpTransitOctets  	Counter64,
+        jnxLdpTransitPackets 	Counter64
+    }
+
+jnxLdpInstanceId OBJECT-TYPE
+    SYNTAX     	Unsigned32
+    MAX-ACCESS 	not-accessible
+    STATUS     	current
+    DESCRIPTION "LDP instance."
+    ::= { jnxLdpStatsEntry 1 }
+
+jnxLdpFecType OBJECT-TYPE
+    SYNTAX     	InetAddressType
+    MAX-ACCESS 	not-accessible
+    STATUS     	current
+    DESCRIPTION 
+	"Type of this LDP FEC."
+    ::= { jnxLdpStatsEntry 2 }
+
+jnxLdpFec OBJECT-TYPE
+    SYNTAX     	InetAddress (SIZE (4|16))
+    MAX-ACCESS	not-accessible
+    STATUS     	current
+    DESCRIPTION "LDP FEC."
+    ::= { jnxLdpStatsEntry 3 }
+
+jnxLdpFecLength OBJECT-TYPE
+    SYNTAX     	InetAddressPrefixLength (0..32)
+    MAX-ACCESS 	not-accessible
+    STATUS     	current
+    DESCRIPTION "LDP FEC length (in bits)."
+    ::= { jnxLdpStatsEntry 4 }
+
+jnxLdpFecStatisticsStatus OBJECT-TYPE
+    SYNTAX     	INTEGER {
+			ok(1),
+			disabled(2),
+			unavailable(3)
+		}
+    MAX-ACCESS 	read-only
+    STATUS     	current
+    DESCRIPTION
+        "Indicates the status of traffic statistics for this FEC.
+	 For penultimate hop FECs traffic statistics can be disabled.
+	 For such FECs, the following objects will have the value '0'."
+      ::= { jnxLdpStatsEntry 5 }
+
+jnxLdpIngressOctets OBJECT-TYPE
+    SYNTAX     	Counter64
+    MAX-ACCESS 	read-only
+    STATUS     	current
+    DESCRIPTION
+        "The number of octets of traffic originated on 
+	 this box, forwarded over the current LDP FEC. The
+	 number reported is not realtime and may be subject 
+	 to several minutes delay. The delay is controllable
+	 by ldp statistics gathering interval, which by
+         default is 5 minutes."
+    ::= { jnxLdpStatsEntry 6 }
+
+jnxLdpIngressPackets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets of traffic originated on
+ 	 this box, forwarded over the current LDP FEC. The
+         number reported is not realtime and may be subject 
+	 to several minutes delay. The delay is controllable
+	 by ldp statistics gathering interval, which by
+         default is 5 minutes."
+    ::= { jnxLdpStatsEntry 7 }
+
+jnxLdpTransitOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets of traffic destined to this FEC,
+	 originated on a different box, forwarded over the 
+	 current LDP FEC. The number reported is not realtime 
+         and may be subject to several minutes delay. The delay 
+         is controllable by ldp statistics gathering interval, 
+         which by default is 5 minutes."
+    ::= { jnxLdpStatsEntry 8 }
+
+jnxLdpTransitPackets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets of traffic destined to this FEC,
+	 originated on a different box, forwarded over the 
+	 current LDP FEC. The number reported is not realtime 
+         and may be subject to several minutes delay. The delay 
+         is controllable by ldp statistics gathering interval, 
+         which by default is 5 minutes."
+      ::= { jnxLdpStatsEntry 9 }
+
+END

mibs/juniper/JUNIPER-LICENSE-MIB

@@ -0,0 +1,310 @@
+--
+-- Juniper Enterprise Specific MIB: License MIB
+--
+-- Copyright (c) 2010, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-LICENSE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks, IpAddress,
+    NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    jnxLicenseMibRoot
+        FROM JUNIPER-SMI
+    DisplayString, DateAndTime
+        FROM SNMPv2-TC;
+
+jnxLicenseMIB       MODULE-IDENTITY
+    LAST-UPDATED    "202005050000Z"
+    ORGANIZATION    "Juniper Networks, Inc."
+    CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+             E-mail: support@juniper.net"
+    DESCRIPTION
+        "Implementation of enterprise specific MIB
+         for license commands and configuration."
+    REVISION    "201007090000Z"    -- Jul 09, 2010
+    DESCRIPTION
+             "Initial version."
+
+    REVISION    "201612150000Z"    -- Dec 15, 2016
+    DESCRIPTION
+             "Added OID jnxLicenseKeyType and Trap jnxLicenseExpired"
+
+
+    REVISION    "201906170000Z"    -- Jun 17, 2019
+    DESCRIPTION
+             "Deprecated jnxLicenseKeys."
+
+    REVISION    "202005050000Z"    -- May 05, 2020
+    DESCRIPTION
+             "Added OID jnxLicenseStartDate and jnxLicenseEndDate."
+
+    ::=  {  jnxLicenseMibRoot  1  }
+
+jnxLicenseNotifications     OBJECT IDENTIFIER ::=  {  jnxLicenseMIB  0  }
+jnxLicenseObjects           OBJECT IDENTIFIER ::=  {  jnxLicenseMIB  1  }
+
+jnxLicenseInstallObjects      OBJECT IDENTIFIER ::=  { jnxLicenseObjects 1 }
+jnxLicenseSettings            OBJECT IDENTIFIER ::=  { jnxLicenseObjects 2 }
+
+-- ****************************************************************
+-- License table for installed licenses
+-- ****************************************************************
+
+jnxLicenseInstallTable   OBJECT-TYPE
+    SYNTAX            SEQUENCE  OF  JnxLicenseInstallEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION       "This table contains installed feature license information."
+    ::=  { jnxLicenseInstallObjects 1 }
+
+jnxLicenseInstallEntry   OBJECT-TYPE
+    SYNTAX            JnxLicenseInstallEntry 
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION       "A row of giving installed feature license information."
+    INDEX             {  IMPLIED jnxLicenseId  }
+    ::=  { jnxLicenseInstallTable 1 }
+
+JnxLicenseInstallEntry  ::=  SEQUENCE {
+    jnxLicenseId              DisplayString,
+    jnxLicenseVersion         INTEGER,
+    jnxLicenseDeviceId        DisplayString,
+    jnxLicenseType            INTEGER,
+    jnxLicenseKeys            OCTET STRING,
+    jnxLicenseKeyType		INTEGER,
+    jnxLicenseStartDate       DateAndTime,
+    jnxLicenseEndDate         DateAndTime
+    }
+
+jnxLicenseId OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION     "Installed feature licenses Id."
+    ::=  {  jnxLicenseInstallEntry 1  }
+
+jnxLicenseVersion OBJECT-TYPE
+    SYNTAX          INTEGER 
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "License Version information"
+    ::=  {  jnxLicenseInstallEntry 2  }
+
+jnxLicenseDeviceId OBJECT-TYPE
+    SYNTAX          DisplayString 
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "License Device Id "
+    ::=  {  jnxLicenseInstallEntry 3  }
+
+jnxLicenseType OBJECT-TYPE
+    SYNTAX          INTEGER { invalid(0), count-down(1), date-based(2),permanent(3) } 
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "License type information"
+    ::=  {  jnxLicenseInstallEntry 4  }
+
+jnxLicenseKeys      OBJECT-TYPE
+    SYNTAX          OCTET STRING 
+    MAX-ACCESS      read-only
+    STATUS          deprecated
+    DESCRIPTION     "******** THIS OBJECT IS DEPRECATED ********
+                    This object is deprecated,
+                    it displays all the license keys 
+                    in the system."
+
+    ::=  {  jnxLicenseInstallEntry 5  }
+
+jnxLicenseKeyType      OBJECT-TYPE
+    SYNTAX          INTEGER {commercial(1), trial(2), demo(3), emergency(4), lab(5), education(6)} 
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "License key type"
+    ::=  {  jnxLicenseInstallEntry 6  }
+
+jnxLicenseStartDate OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "License Start Date information "
+    ::=  {  jnxLicenseInstallEntry 7  }
+
+jnxLicenseEndDate   OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "License End Date information "
+    ::=  {  jnxLicenseInstallEntry 8  }
+
+-- Feature Listing Table 
+
+jnxLicenseFeatureListTable OBJECT-TYPE
+    SYNTAX          SEQUENCE  OF  JnxLicenseFeatureListEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION     "list of features supporting Licensing."
+    ::=  { jnxLicenseInstallObjects  2 }
+
+jnxLicenseFeatureListEntry OBJECT-TYPE
+    SYNTAX          JnxLicenseFeatureListEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION     "A row of licensed features."
+    INDEX           {  jnxLicenseFeatureId  }
+    ::=  { jnxLicenseFeatureListTable 1 }
+
+JnxLicenseFeatureListEntry ::=  SEQUENCE {
+    jnxLicenseFeatureId              INTEGER,
+    jnxLicenseFeatureName            DisplayString,
+    jnxLicenseFeatureDescr           DisplayString,
+    jnxLicenseFeatureLicenseId       DisplayString,
+    jnxLicenseFeatureLicenseUsed            INTEGER,
+    jnxLicenseFeatureLicenseInstalled       INTEGER,
+    jnxLicenseFeatureLicenseNeeded          INTEGER
+    }
+
+jnxLicenseFeatureId OBJECT-TYPE
+    SYNTAX              INTEGER 
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION         "Feature Id to point an entry in this table"
+    ::=  { jnxLicenseFeatureListEntry 1 }
+
+jnxLicenseFeatureName OBJECT-TYPE
+    SYNTAX                 DisplayString 
+    MAX-ACCESS             read-only
+    STATUS                 current
+    DESCRIPTION            "Feature Name"
+    ::=  {  jnxLicenseFeatureListEntry 2  } 
+
+jnxLicenseFeatureDescr OBJECT-TYPE
+    SYNTAX                 DisplayString
+    MAX-ACCESS             read-only
+    STATUS                 current
+    DESCRIPTION            "Feature Name"
+    ::=  {  jnxLicenseFeatureListEntry 3  }
+
+jnxLicenseFeatureLicenseId OBJECT-TYPE
+    SYNTAX                 DisplayString 
+    MAX-ACCESS             read-only
+    STATUS                 current
+    DESCRIPTION            "Feature License Id"
+    ::=  {  jnxLicenseFeatureListEntry 4  } 
+
+jnxLicenseFeatureLicenseUsed      OBJECT-TYPE
+    SYNTAX          INTEGER
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "Licenses Used"
+    ::=  {  jnxLicenseFeatureListEntry 5  }
+
+jnxLicenseFeatureLicenseInstalled OBJECT-TYPE
+    SYNTAX          INTEGER
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "Licenses Installed"
+    ::=  {  jnxLicenseFeatureListEntry 6  }
+
+jnxLicenseFeatureLicenseNeeded    OBJECT-TYPE
+    SYNTAX          INTEGER
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "Licenses Needed"
+    ::=  {  jnxLicenseFeatureListEntry 7  }
+
+
+-- ****************************************************************
+-- License configuration parameters
+-- ****************************************************************
+
+jnxLicenseRenewBeforExpiration  OBJECT-TYPE
+    SYNTAX                      INTEGER
+    MAX-ACCESS                  read-only
+    STATUS                      current
+    DESCRIPTION
+        "License renew lead time before expiration in days."
+    ::= { jnxLicenseSettings  1 }
+
+jnxLicenseRenewInterval  OBJECT-TYPE
+    SYNTAX               INTEGER
+    MAX-ACCESS           read-only
+    STATUS               current
+    DESCRIPTION
+        "License checking interval in hours."
+    ::= { jnxLicenseSettings  2 }
+
+jnxLicenseAutoUpdate    OBJECT-TYPE
+    SYNTAX               DisplayString
+    MAX-ACCESS           read-only
+    STATUS               current
+    DESCRIPTION
+        "License auto update URL of a license server."
+    ::= { jnxLicenseSettings  3 }
+
+
+
+-- ********************************************************************
+-- define branches for jnx license traps
+-- ********************************************************************
+
+jnxLicenseGraceExpired NOTIFICATION-TYPE
+    OBJECTS  { jnxLicenseFeatureName }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the license grace period for
+         feature identified by jnxLicenseFeatureName is expired"
+    ::= { jnxLicenseNotifications 1 }
+
+jnxLicenseGraceAboutToExpire NOTIFICATION-TYPE
+    OBJECTS  { jnxLicenseFeatureName }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the license grace period for
+         feature identified by jnxLicenseFeatureName is about to expire"
+    ::= { jnxLicenseNotifications 2 }
+
+jnxLicenseAboutToExpire NOTIFICATION-TYPE
+    OBJECTS  { jnxLicenseFeatureName }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the license period for
+         feature identified by jnxLicenseFeatureName is about to expire"
+    ::= { jnxLicenseNotifications 3 }
+
+jnxLicenseInfringeCumulative NOTIFICATION-TYPE
+    OBJECTS  { jnxLicenseFeatureName }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the feature is used more
+         times than as specified in number of licenses allowed for feature
+         as identified by jnxLicenseFeatureName"
+    ::= { jnxLicenseNotifications 4 }
+
+jnxLicenseInfringeSingle NOTIFICATION-TYPE
+    OBJECTS  { jnxLicenseFeatureName }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the license for feature
+         identified by jnxLicenseFeatureName is not valid i.e. either expired or
+         not available."
+    ::= { jnxLicenseNotifications 5 }
+
+jnxLicenseKeyExpired NOTIFICATION-TYPE
+    OBJECTS  { jnxLicenseFeatureName,  jnxLicenseFeatureLicenseId, jnxLicenseKeyType }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when the license for feature
+         identified by jnxLicenseFeatureName is not valid i.e. either expired or
+         not available."
+    ::= { jnxLicenseNotifications 6 }
+
+END

mibs/juniper/JUNIPER-LSYS-SECURITYPROFILE-MIB

@@ -0,0 +1,45 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYS-SECURITYPROFILE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      jnxLsysSecurityProfile	     FROM JUNIPER-JS-SMI;
+
+--
+-- Object identifier added as the basis for identifying other logical-system
+-- Security profile nodes.
+
+
+--
+-- next level object identifiers under jnxLsysSecurityProfile
+-- 
+jnxLsysSpZone               OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 1 }
+jnxLsysSpScheduler          OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 2 }
+jnxLsysSpPolicy             OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 3 }
+jnxLsysSpPolicywcnt         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 4 }
+jnxLsysSpFlowgate           OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 5 }
+jnxLsysSpFlowsess           OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 6 }
+jnxLsysSpAuthentry          OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 7 }
+jnxLsysSpNATsrcpool         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 8 }
+jnxLsysSpNATdstpool         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 9 }
+jnxLsysSpNATsrcpatad        OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 10 }
+jnxLsysSpNATsrcnopatad      OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 11 }
+jnxLsysSpNATsrcrule         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 12 }
+jnxLsysSpNATdstrule         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 13 }
+jnxLsysSpNATstaticrule      OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 14 }
+jnxLsysSpNATconebind        OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 15 }
+jnxLsysSpNATpoipnum         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 16 }
+jnxLsysSpNATRuleRefPfx      OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 17 }
+jnxLsysSpCPU                OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 18 }
+jnxSp                       OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 19 }
+-- jnxLsysSpGRsc               OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 19 }
+jnxLsysSpSecurewire         OBJECT IDENTIFIER ::= { jnxLsysSecurityProfile 20 }
+
+END

mibs/juniper/JUNIPER-LSYSSP-CPU-MIB

@@ -0,0 +1,280 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-CPU-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpCPU                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpCPUMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- October 1, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the CPU-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security CPU resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpCPU 1 }
+
+    jnxLsysSpCPUObjects        OBJECT IDENTIFIER ::= { jnxLsysSpCPUMIB 1 }
+    jnxLsysSpCPUSummary        OBJECT IDENTIFIER ::= { jnxLsysSpCPUMIB 2 }
+    jnxLsysSpCPSummary         OBJECT IDENTIFIER ::= { jnxLsysSpCPUSummary 1 }
+    jnxLsysSpSPUSummary        OBJECT IDENTIFIER ::= { jnxLsysSpCPUSummary 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular CPU resource information objects per LSYS:
+--   Below are CPU resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- CPU resource table per LSYS
+
+    jnxLsysSpCPUTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpCPUEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE CPU objects for CPU resource consumption per LSYS."  
+    ::= { jnxLsysSpCPUObjects 1 }
+    
+    jnxLsysSpCPUEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpCPUEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in CPU resource table."
+    INDEX { IMPLIED jnxLsysSpCPULsysName }          
+    ::= { jnxLsysSpCPUTable 1 }          
+
+    JnxLsysSpCPUEntry ::= 
+       SEQUENCE {
+          jnxLsysSpCPULsysName    DisplayString,
+          jnxLsysSpCPUProfileName DisplayString,
+          jnxLsysSpCPUsage        Unsigned32,
+          jnxLsysSpSPUUsage       Unsigned32,
+          jnxLsysSpCPUReserved    Unsigned32,
+          jnxLsysSpCPUMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the CPU resource table
+ 
+    jnxLsysSpCPULsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which CPU resource information is retrieved. "
+        ::= { jnxLsysSpCPUEntry 1 }
+
+    jnxLsysSpCPUProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpCPUEntry 2 }
+
+    jnxLsysSpCPUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "0.01 percent"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current CP resource usage count for the LSYS."
+    ::= { jnxLsysSpCPUEntry 3 }
+    
+    jnxLsysSpSPUUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "0.01 percent"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current SPU resource usage count for the LSYS."
+    ::= { jnxLsysSpCPUEntry 4 }
+    
+    jnxLsysSpCPUReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "0.01 percent"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpCPUEntry 5 } 
+
+    jnxLsysSpCPUMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "0.01 percent"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpCPUEntry 6 }
+
+
+-- **********************************************************************
+-- CP resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpCPUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The CP resource consumption over all LSYS."
+    ::= { jnxLsysSpCPSummary 1 }          
+
+    jnxLsysSpCPMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The CP resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpCPSummary 2 }
+    
+    jnxLsysSpCPAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The CP resource available in the whole device."
+    ::= { jnxLsysSpCPSummary 3 }
+    
+    jnxLsysSpCPHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of CP resource consumed of a LSYS."
+    ::= { jnxLsysSpCPSummary 4 }
+    
+    jnxLsysSpCPHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most CP resource."
+    ::= { jnxLsysSpCPSummary 5 }
+    
+    jnxLsysSpCPLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of CP resource consumed of a LSYS."
+    ::= { jnxLsysSpCPSummary 6 }
+    
+    jnxLsysSpCPLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least CP resource."
+    ::= { jnxLsysSpCPSummary 7 }
+    
+
+-- **********************************************************************
+-- SPU resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpSPUUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The SPU resource consumption over all LSYS."
+    ::= { jnxLsysSpSPUSummary 1 }          
+
+    jnxLsysSpSPUMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The SPU resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpSPUSummary 2 }
+    
+    jnxLsysSpSPUAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The SPU resource available in the whole device."
+    ::= { jnxLsysSpSPUSummary 3 }
+    
+    jnxLsysSpSPUHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of SPU resource consumed of a LSYS."
+    ::= { jnxLsysSpSPUSummary 4 }
+    
+    jnxLsysSpSPUHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most SPU resource."
+    ::= { jnxLsysSpSPUSummary 5 }
+    
+    jnxLsysSpSPULightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        UNITS                   "0.01 percent"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of SPU resource consumed of a LSYS."
+    ::= { jnxLsysSpSPUSummary 6 }
+    
+    jnxLsysSpSPULightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least SPU resource."
+    ::= { jnxLsysSpSPUSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of CPU resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-FLOWGATE-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-FLOWGATE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpFlowgate                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpFlowgateMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- July 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the flow-gate-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security flow-gate resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpFlowgate 1 }
+
+    jnxLsysSpFlowgateObjects        OBJECT IDENTIFIER ::= { jnxLsysSpFlowgateMIB 1 }
+    jnxLsysSpFlowgateSummary        OBJECT IDENTIFIER ::= { jnxLsysSpFlowgateMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular flow-gate resource information objects per LSYS:
+--   Below are flow-gate resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- flow-gate resource table per LSYS
+
+    jnxLsysSpFlowgateTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpFlowgateEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE flow-gate objects for flow-gate resource consumption per LSYS."  
+    ::= { jnxLsysSpFlowgateObjects 1 }
+    
+    jnxLsysSpFlowgateEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpFlowgateEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in flow-gate resource table."
+    INDEX { IMPLIED jnxLsysSpFlowgateLsysName }          
+    ::= { jnxLsysSpFlowgateTable 1 }          
+
+    JnxLsysSpFlowgateEntry ::= 
+       SEQUENCE {
+          jnxLsysSpFlowgateLsysName    DisplayString,
+          jnxLsysSpFlowgateProfileName DisplayString,
+          jnxLsysSpFlowgateUsage       Unsigned32,
+          jnxLsysSpFlowgateReserved    Unsigned32,
+          jnxLsysSpFlowgateMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the flow-gate resource table
+ 
+    jnxLsysSpFlowgateLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which flow-gate resource information is retrieved. "
+        ::= { jnxLsysSpFlowgateEntry 1 }
+
+    jnxLsysSpFlowgateProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpFlowgateEntry 2 }
+
+    jnxLsysSpFlowgateUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpFlowgateEntry 3 }
+    
+    jnxLsysSpFlowgateReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpFlowgateEntry 4 } 
+
+    jnxLsysSpFlowgateMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpFlowgateEntry 5 }
+
+
+-- **********************************************************************
+-- flow-gate resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpFlowgateUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The flow-gate resource consumption over all LSYS."
+    ::= { jnxLsysSpFlowgateSummary 1 }          
+
+    jnxLsysSpFlowgateMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The flow-gate resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpFlowgateSummary 2 }
+    
+    jnxLsysSpFlowgateAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The flow-gate resource available in the whole device."
+    ::= { jnxLsysSpFlowgateSummary 3 }
+    
+    jnxLsysSpFlowgateHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of flow-gate resource consumed of a LSYS."
+    ::= { jnxLsysSpFlowgateSummary 4 }
+    
+    jnxLsysSpFlowgateHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most flow-gate resource."
+    ::= { jnxLsysSpFlowgateSummary 5 }
+    
+    jnxLsysSpFlowgateLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of flow-gate resource consumed of a LSYS."
+    ::= { jnxLsysSpFlowgateSummary 6 }
+    
+    jnxLsysSpFlowgateLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least flow-gate resource."
+    ::= { jnxLsysSpFlowgateSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of flow-gate resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-FLOWSESS-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-FLOWSESS-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpFlowsess                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpFlowsessMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- July 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the flow-session-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security flow-session resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpFlowsess 1 }
+
+    jnxLsysSpFlowsessObjects        OBJECT IDENTIFIER ::= { jnxLsysSpFlowsessMIB 1 }
+    jnxLsysSpFlowsessSummary        OBJECT IDENTIFIER ::= { jnxLsysSpFlowsessMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular flowsess resource information objects per LSYS:
+--   Below are flowsess resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- Flowsess resource table per LSYS
+
+    jnxLsysSpFlowsessTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpFlowsessEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE flow-session objects for flow-session resource consumption per LSYS."  
+    ::= { jnxLsysSpFlowsessObjects 1 }
+    
+    jnxLsysSpFlowsessEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpFlowsessEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in flow-session resource table."
+    INDEX { IMPLIED jnxLsysSpFlowsessLsysName }          
+    ::= { jnxLsysSpFlowsessTable 1 }          
+
+    JnxLsysSpFlowsessEntry ::= 
+       SEQUENCE {
+          jnxLsysSpFlowsessLsysName    DisplayString,
+          jnxLsysSpFlowsessProfileName DisplayString,
+          jnxLsysSpFlowsessUsage       Unsigned32,
+          jnxLsysSpFlowsessReserved    Unsigned32,
+          jnxLsysSpFlowsessMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the flow-session resource table
+ 
+    jnxLsysSpFlowsessLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which flow-session resource information is retrieved. "
+        ::= { jnxLsysSpFlowsessEntry 1 }
+
+    jnxLsysSpFlowsessProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpFlowsessEntry 2 }
+
+    jnxLsysSpFlowsessUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpFlowsessEntry 3 }
+    
+    jnxLsysSpFlowsessReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpFlowsessEntry 4 } 
+
+    jnxLsysSpFlowsessMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpFlowsessEntry 5 }
+
+
+-- **********************************************************************
+-- Flow-session resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpFlowsessUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The flow-session resource consumption over all LSYS."
+    ::= { jnxLsysSpFlowsessSummary 1 }          
+
+    jnxLsysSpFlowsessMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The flow-session resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpFlowsessSummary 2 }
+    
+    jnxLsysSpFlowsessAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The flow-session resource available in the whole device."
+    ::= { jnxLsysSpFlowsessSummary 3 }
+    
+    jnxLsysSpFlowsessHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of flow-session resource consumed of a LSYS."
+    ::= { jnxLsysSpFlowsessSummary 4 }
+    
+    jnxLsysSpFlowsessHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most flow-session resource."
+    ::= { jnxLsysSpFlowsessSummary 5 }
+    
+    jnxLsysSpFlowsessLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of flow-session resource consumed of a LSYS."
+    ::= { jnxLsysSpFlowsessSummary 6 }
+    
+    jnxLsysSpFlowsessLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least flow-session resource."
+    ::= { jnxLsysSpFlowsessSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of flow-session resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATCONEBIND-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATCONEBIND-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATconebind                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATconebindMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-cone-bind-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-cone-bind resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATconebind 1 }
+
+    jnxLsysSpNATconebindObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATconebindMIB 1 }
+    jnxLsysSpNATconebindSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATconebindMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-cone-bind resource information objects per LSYS:
+--   Below are NAT-cone-bind resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-cone-bind resource table per LSYS
+
+    jnxLsysSpNATconebindTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATconebindEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-cone-bind objects for NAT-cone-bind 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpNATconebindObjects 1 }
+    
+    jnxLsysSpNATconebindEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATconebindEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-cone-bind resource table."
+    INDEX { IMPLIED jnxLsysSpNATconebindLsysName }          
+    ::= { jnxLsysSpNATconebindTable 1 }          
+
+    JnxLsysSpNATconebindEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATconebindLsysName    DisplayString,
+          jnxLsysSpNATconebindProfileName DisplayString,
+          jnxLsysSpNATconebindUsage       Unsigned32,
+          jnxLsysSpNATconebindReserved    Unsigned32,
+          jnxLsysSpNATconebindMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-cone-bind resource table
+ 
+    jnxLsysSpNATconebindLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-cone-bind 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATconebindEntry 1 }
+
+    jnxLsysSpNATconebindProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATconebindEntry 2 }
+
+    jnxLsysSpNATconebindUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATconebindEntry 3 }
+    
+    jnxLsysSpNATconebindReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATconebindEntry 4 } 
+
+    jnxLsysSpNATconebindMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATconebindEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-cone-bind resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATconebindUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-cone-bind resource consumption over all LSYS."
+    ::= { jnxLsysSpNATconebindSummary 1 }          
+
+    jnxLsysSpNATconebindMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-cone-bind resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATconebindSummary 2 }
+    
+    jnxLsysSpNATconebindAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-cone-bind resource available in the whole device."
+    ::= { jnxLsysSpNATconebindSummary 3 }
+    
+    jnxLsysSpNATconebindHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-cone-bind resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATconebindSummary 4 }
+    
+    jnxLsysSpNATconebindHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-cone-bind resource."
+    ::= { jnxLsysSpNATconebindSummary 5 }
+    
+    jnxLsysSpNATconebindLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-cone-bind resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATconebindSummary 6 }
+    
+    jnxLsysSpNATconebindLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-cone-bind resource."
+    ::= { jnxLsysSpNATconebindSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-cone-bind resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATDSTPOOL-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATDSTPOOL-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATdstpool                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATdstpoolMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-destination-pool-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-destination-pool resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATdstpool 1 }
+
+    jnxLsysSpNATdstpoolObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATdstpoolMIB 1 }
+    jnxLsysSpNATdstpoolSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATdstpoolMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-destination-pool resource information objects per LSYS:
+--   Below are NAT-destination-pool resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-destination-pool resource table per LSYS
+
+    jnxLsysSpNATdstpoolTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATdstpoolEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-destination-pool objects for NAT-destination-pool 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpNATdstpoolObjects 1 }
+    
+    jnxLsysSpNATdstpoolEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATdstpoolEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-destination-pool resource table."
+    INDEX { IMPLIED jnxLsysSpNATdstpoolLsysName }          
+    ::= { jnxLsysSpNATdstpoolTable 1 }          
+
+    JnxLsysSpNATdstpoolEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATdstpoolLsysName    DisplayString,
+          jnxLsysSpNATdstpoolProfileName DisplayString,
+          jnxLsysSpNATdstpoolUsage       Unsigned32,
+          jnxLsysSpNATdstpoolReserved    Unsigned32,
+          jnxLsysSpNATdstpoolMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-destination-pool resource table
+ 
+    jnxLsysSpNATdstpoolLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-destination-pool 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATdstpoolEntry 1 }
+
+    jnxLsysSpNATdstpoolProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATdstpoolEntry 2 }
+
+    jnxLsysSpNATdstpoolUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATdstpoolEntry 3 }
+    
+    jnxLsysSpNATdstpoolReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATdstpoolEntry 4 } 
+
+    jnxLsysSpNATdstpoolMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATdstpoolEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-destination-pool resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATdstpoolUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-destination-pool resource consumption over all LSYS."
+    ::= { jnxLsysSpNATdstpoolSummary 1 }          
+
+    jnxLsysSpNATdstpoolMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-destination-pool resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATdstpoolSummary 2 }
+    
+    jnxLsysSpNATdstpoolAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-destination-pool resource available in the whole device."
+    ::= { jnxLsysSpNATdstpoolSummary 3 }
+    
+    jnxLsysSpNATdstpoolHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-destination-pool resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATdstpoolSummary 4 }
+    
+    jnxLsysSpNATdstpoolHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-destination-pool resource."
+    ::= { jnxLsysSpNATdstpoolSummary 5 }
+    
+    jnxLsysSpNATdstpoolLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-destination-pool resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATdstpoolSummary 6 }
+    
+    jnxLsysSpNATdstpoolLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-destination-pool resource."
+    ::= { jnxLsysSpNATdstpoolSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-destination-pool resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATDSTRULE-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATDSTRULE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATdstrule                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATdstruleMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-destination-rule-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-destination-rule resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATdstrule 1 }
+
+    jnxLsysSpNATdstruleObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATdstruleMIB 1 }
+    jnxLsysSpNATdstruleSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATdstruleMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-destination-rule resource information objects per LSYS:
+--   Below are NAT-destination-rule resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-destination-rule resource table per LSYS
+
+    jnxLsysSpNATdstruleTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATdstruleEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-destination-rule objects for NAT-destination-rule 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpNATdstruleObjects 1 }
+    
+    jnxLsysSpNATdstruleEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATdstruleEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-destination-rule resource table."
+    INDEX { IMPLIED jnxLsysSpNATdstruleLsysName }          
+    ::= { jnxLsysSpNATdstruleTable 1 }          
+
+    JnxLsysSpNATdstruleEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATdstruleLsysName    DisplayString,
+          jnxLsysSpNATdstruleProfileName DisplayString,
+          jnxLsysSpNATdstruleUsage       Unsigned32,
+          jnxLsysSpNATdstruleReserved    Unsigned32,
+          jnxLsysSpNATdstruleMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-destination-rule resource table
+ 
+    jnxLsysSpNATdstruleLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-destination-rule 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATdstruleEntry 1 }
+
+    jnxLsysSpNATdstruleProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATdstruleEntry 2 }
+
+    jnxLsysSpNATdstruleUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATdstruleEntry 3 }
+    
+    jnxLsysSpNATdstruleReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATdstruleEntry 4 } 
+
+    jnxLsysSpNATdstruleMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATdstruleEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-destination-rule resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATdstruleUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-destination-rule resource consumption over all LSYS."
+    ::= { jnxLsysSpNATdstruleSummary 1 }          
+
+    jnxLsysSpNATdstruleMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-destination-rule resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATdstruleSummary 2 }
+    
+    jnxLsysSpNATdstruleAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-destination-rule resource available in the whole device."
+    ::= { jnxLsysSpNATdstruleSummary 3 }
+    
+    jnxLsysSpNATdstruleHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-destination-rule resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATdstruleSummary 4 }
+    
+    jnxLsysSpNATdstruleHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-destination-rule resource."
+    ::= { jnxLsysSpNATdstruleSummary 5 }
+    
+    jnxLsysSpNATdstruleLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-destination-rule resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATdstruleSummary 6 }
+    
+    jnxLsysSpNATdstruleLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-destination-rule resource."
+    ::= { jnxLsysSpNATdstruleSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-destination-rule resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATPOIPNUM-MIB

@@ -0,0 +1,204 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATPOIPNUM-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATpoipnum                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATpoipnumMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-port-overloading-IP-number-specific 
+             MIB for Juniper Enterprise Logical-System (LSYS) security profiles.
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-port-overloading-IP-number resource is the focus in 
+             this MIB. 
+            "
+        ::= { jnxLsysSpNATpoipnum 1 }
+
+    jnxLsysSpNATpoipnumObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATpoipnumMIB 1 }
+    jnxLsysSpNATpoipnumSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATpoipnumMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-port-overloading-IP-number resource information objects per LSYS:
+--   Below are NAT-port-overloading-IP-number resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-port-overloading-IP-number resource table per LSYS
+
+    jnxLsysSpNATpoipnumTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATpoipnumEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-port-overloading-IP-number objects for 
+             NAT-port-overloading-IP-number resource consumption per LSYS."  
+    ::= { jnxLsysSpNATpoipnumObjects 1 }
+    
+    jnxLsysSpNATpoipnumEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATpoipnumEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-port-overloading-IP-number resource table."
+    INDEX { IMPLIED jnxLsysSpNATpoipnumLsysName }          
+    ::= { jnxLsysSpNATpoipnumTable 1 }          
+
+    JnxLsysSpNATpoipnumEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATpoipnumLsysName    DisplayString,
+          jnxLsysSpNATpoipnumProfileName DisplayString,
+          jnxLsysSpNATpoipnumUsage       Unsigned32,
+          jnxLsysSpNATpoipnumReserved    Unsigned32,
+          jnxLsysSpNATpoipnumMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-port-overloading-IP-number resource table
+ 
+    jnxLsysSpNATpoipnumLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-port-overloading-IP-
+             number resource information is retrieved. "
+        ::= { jnxLsysSpNATpoipnumEntry 1 }
+
+    jnxLsysSpNATpoipnumProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATpoipnumEntry 2 }
+
+    jnxLsysSpNATpoipnumUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATpoipnumEntry 3 }
+    
+    jnxLsysSpNATpoipnumReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATpoipnumEntry 4 } 
+
+    jnxLsysSpNATpoipnumMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATpoipnumEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-port-overloading-IP-number resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATpoipnumUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-port-overloading-IP-number resource consumption over all 
+            LSYS."
+    ::= { jnxLsysSpNATpoipnumSummary 1 }          
+
+    jnxLsysSpNATpoipnumMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-port-overloading-IP-number resource maximum quota for the 
+            whole device for all LSYS."
+    ::= { jnxLsysSpNATpoipnumSummary 2 }
+    
+    jnxLsysSpNATpoipnumAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-port-overloading-IP-number resource available in the 
+            whole device."
+    ::= { jnxLsysSpNATpoipnumSummary 3 }
+    
+    jnxLsysSpNATpoipnumHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-port-overloading-IP-number resource 
+            consumed of a LSYS."
+    ::= { jnxLsysSpNATpoipnumSummary 4 }
+    
+    jnxLsysSpNATpoipnumHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-port-overloading-IP-number 
+            resource."
+    ::= { jnxLsysSpNATpoipnumSummary 5 }
+    
+    jnxLsysSpNATpoipnumLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-port-overloading-IP-number resource 
+            consumed of a LSYS."
+    ::= { jnxLsysSpNATpoipnumSummary 6 }
+    
+    jnxLsysSpNATpoipnumLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-port-overloading-IP-
+            number resource."
+    ::= { jnxLsysSpNATpoipnumSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-port-overloading-IP-number resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATSRCNOPATAD-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATSRCNOPATAD-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATsrcnopatad                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATsrcnopatadMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-src-no-pat-address-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-src-no-pat-address resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATsrcnopatad 1 }
+
+    jnxLsysSpNATsrcnopatadObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcnopatadMIB 1 }
+    jnxLsysSpNATsrcnopatadSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcnopatadMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-src-no-pat-address resource information objects per LSYS:
+--   Below are NAT-src-no-pat-address resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-src-no-pat-address resource table per LSYS
+
+    jnxLsysSpNATsrcnopatadTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATsrcnopatadEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-src-no-pat-address objects for NAT-src-no-pat-
+             address resource consumption per LSYS."  
+    ::= { jnxLsysSpNATsrcnopatadObjects 1 }
+    
+    jnxLsysSpNATsrcnopatadEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATsrcnopatadEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-src-no-pat-address resource table."
+    INDEX { IMPLIED jnxLsysSpNATsrcnopatadLsysName }          
+    ::= { jnxLsysSpNATsrcnopatadTable 1 }          
+
+    JnxLsysSpNATsrcnopatadEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATsrcnopatadLsysName    DisplayString,
+          jnxLsysSpNATsrcnopatadProfileName DisplayString,
+          jnxLsysSpNATsrcnopatadUsage       Unsigned32,
+          jnxLsysSpNATsrcnopatadReserved    Unsigned32,
+          jnxLsysSpNATsrcnopatadMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-src-no-pat-address resource table
+ 
+    jnxLsysSpNATsrcnopatadLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-src-no-pat-address 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATsrcnopatadEntry 1 }
+
+    jnxLsysSpNATsrcnopatadProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATsrcnopatadEntry 2 }
+
+    jnxLsysSpNATsrcnopatadUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcnopatadEntry 3 }
+    
+    jnxLsysSpNATsrcnopatadReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATsrcnopatadEntry 4 } 
+
+    jnxLsysSpNATsrcnopatadMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcnopatadEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-src-no-pat-address resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATsrcnopatadUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-src-no-pat-address resource consumption over all LSYS."
+    ::= { jnxLsysSpNATsrcnopatadSummary 1 }          
+
+    jnxLsysSpNATsrcnopatadMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-src-no-pat-address resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATsrcnopatadSummary 2 }
+    
+    jnxLsysSpNATsrcnopatadAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-src-no-pat-address resource available in the whole device."
+    ::= { jnxLsysSpNATsrcnopatadSummary 3 }
+    
+    jnxLsysSpNATsrcnopatadHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-src-no-pat-address resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATsrcnopatadSummary 4 }
+    
+    jnxLsysSpNATsrcnopatadHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-src-no-pat-address resource."
+    ::= { jnxLsysSpNATsrcnopatadSummary 5 }
+    
+    jnxLsysSpNATsrcnopatadLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-src-no-pat-address resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATsrcnopatadSummary 6 }
+    
+    jnxLsysSpNATsrcnopatadLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-src-no-pat-address resource."
+    ::= { jnxLsysSpNATsrcnopatadSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-src-no-pat-address resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATSRCPATAD-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATSRCPATAD-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATsrcpatad                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATsrcpatadMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-src-pat-address-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-src-pat-address resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATsrcpatad 1 }
+
+    jnxLsysSpNATsrcpatadObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcpatadMIB 1 }
+    jnxLsysSpNATsrcpatadSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcpatadMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-src-pat-address resource information objects per LSYS:
+--   Below are NAT-src-pat-address resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-src-pat-address resource table per LSYS
+
+    jnxLsysSpNATsrcpatadTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATsrcpatadEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-src-pat-address objects for NAT-src-pat-address 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpNATsrcpatadObjects 1 }
+    
+    jnxLsysSpNATsrcpatadEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATsrcpatadEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-src-pat-address resource table."
+    INDEX { IMPLIED jnxLsysSpNATsrcpatadLsysName }          
+    ::= { jnxLsysSpNATsrcpatadTable 1 }          
+
+    JnxLsysSpNATsrcpatadEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATsrcpatadLsysName    DisplayString,
+          jnxLsysSpNATsrcpatadProfileName DisplayString,
+          jnxLsysSpNATsrcpatadUsage       Unsigned32,
+          jnxLsysSpNATsrcpatadReserved    Unsigned32,
+          jnxLsysSpNATsrcpatadMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-src-pat-address resource table
+ 
+    jnxLsysSpNATsrcpatadLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-src-pat-address 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATsrcpatadEntry 1 }
+
+    jnxLsysSpNATsrcpatadProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATsrcpatadEntry 2 }
+
+    jnxLsysSpNATsrcpatadUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcpatadEntry 3 }
+    
+    jnxLsysSpNATsrcpatadReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATsrcpatadEntry 4 } 
+
+    jnxLsysSpNATsrcpatadMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcpatadEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-src-pat-address resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATsrcpatadUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-src-pat-address resource consumption over all LSYS."
+    ::= { jnxLsysSpNATsrcpatadSummary 1 }          
+
+    jnxLsysSpNATsrcpatadMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-src-pat-address resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATsrcpatadSummary 2 }
+    
+    jnxLsysSpNATsrcpatadAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-src-pat-address resource available in the whole device."
+    ::= { jnxLsysSpNATsrcpatadSummary 3 }
+    
+    jnxLsysSpNATsrcpatadHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-src-pat-address resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATsrcpatadSummary 4 }
+    
+    jnxLsysSpNATsrcpatadHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-src-pat-address resource."
+    ::= { jnxLsysSpNATsrcpatadSummary 5 }
+    
+    jnxLsysSpNATsrcpatadLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-src-pat-address resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATsrcpatadSummary 6 }
+    
+    jnxLsysSpNATsrcpatadLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-src-pat-address resource."
+    ::= { jnxLsysSpNATsrcpatadSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-src-pat-address resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATSRCPOOL-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATSRCPOOL-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATsrcpool                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATsrcpoolMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- July 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-src-pool-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-src-pool resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATsrcpool 1 }
+
+    jnxLsysSpNATsrcpoolObjects        OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcpoolMIB 1 }
+    jnxLsysSpNATsrcpoolSummary        OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcpoolMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-src-pool resource information objects per LSYS:
+--   Below are NAT-src-pool resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- NAT-src-pool resource table per LSYS
+
+    jnxLsysSpNATsrcpoolTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSppNATsrcpoolEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-src-pool objects for NAT-src-pool resource consumption per LSYS."  
+    ::= { jnxLsysSpNATsrcpoolObjects 1 }
+    
+    jnxLsysSpNATsrcpoolEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSppNATsrcpoolEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-src-pool resource table."
+    INDEX { IMPLIED jnxLsysSpNATsrcpoolLsysName }          
+    ::= { jnxLsysSpNATsrcpoolTable 1 }          
+
+    JnxLsysSppNATsrcpoolEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATsrcpoolLsysName    DisplayString,
+          jnxLsysSpNATsrcpoolProfileName DisplayString,
+          jnxLsysSpNATsrcpoolUsage       Unsigned32,
+          jnxLsysSpNATsrcpoolReserved    Unsigned32,
+          jnxLsysSpNATsrcpoolMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-src-pool resource table
+ 
+    jnxLsysSpNATsrcpoolLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-src-pool resource information is retrieved. "
+        ::= { jnxLsysSpNATsrcpoolEntry 1 }
+
+    jnxLsysSpNATsrcpoolProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATsrcpoolEntry 2 }
+
+    jnxLsysSpNATsrcpoolUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcpoolEntry 3 }
+    
+    jnxLsysSpNATsrcpoolReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATsrcpoolEntry 4 } 
+
+    jnxLsysSpNATsrcpoolMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcpoolEntry 5 }
+
+
+-- **********************************************************************
+-- NAT-src-pool resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATsrcpoolUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-src-pool resource consumption over all LSYS."
+    ::= { jnxLsysSpNATsrcpoolSummary 1 }          
+
+    jnxLsysSpNATsrcpoolMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-src-pool resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpNATsrcpoolSummary 2 }
+    
+    jnxLsysSpNATsrcpoolAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-src-pool resource available in the whole device."
+    ::= { jnxLsysSpNATsrcpoolSummary 3 }
+    
+    jnxLsysSpNATsrcpoolHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-src-pool resource consumed of a LSYS."
+    ::= { jnxLsysSpNATsrcpoolSummary 4 }
+    
+    jnxLsysSpNATsrcpoolHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-src-pool resource."
+    ::= { jnxLsysSpNATsrcpoolSummary 5 }
+    
+    jnxLsysSpNATsrcpoolLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-src-pool resource consumed of a LSYS."
+    ::= { jnxLsysSpNATsrcpoolSummary 6 }
+    
+    jnxLsysSpNATsrcpoolLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-src-pool resource."
+    ::= { jnxLsysSpNATsrcpoolSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-src-pool resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATSRCRULE-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATSRCRULE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATsrcrule                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATsrcruleMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-source-rule-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-source-rule resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATsrcrule 1 }
+
+    jnxLsysSpNATsrcruleObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcruleMIB 1 }
+    jnxLsysSpNATsrcruleSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATsrcruleMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-source-rule resource information objects per LSYS:
+--   Below are NAT-source-rule resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-source-rule resource table per LSYS
+
+    jnxLsysSpNATsrcruleTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATsrcruleEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-source-rule objects for NAT-source-rule 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpNATsrcruleObjects 1 }
+    
+    jnxLsysSpNATsrcruleEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATsrcruleEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-source-rule resource table."
+    INDEX { IMPLIED jnxLsysSpNATsrcruleLsysName }          
+    ::= { jnxLsysSpNATsrcruleTable 1 }          
+
+    JnxLsysSpNATsrcruleEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATsrcruleLsysName    DisplayString,
+          jnxLsysSpNATsrcruleProfileName DisplayString,
+          jnxLsysSpNATsrcruleUsage       Unsigned32,
+          jnxLsysSpNATsrcruleReserved    Unsigned32,
+          jnxLsysSpNATsrcruleMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-source-rule resource table
+ 
+    jnxLsysSpNATsrcruleLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-source-rule 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATsrcruleEntry 1 }
+
+    jnxLsysSpNATsrcruleProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATsrcruleEntry 2 }
+
+    jnxLsysSpNATsrcruleUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcruleEntry 3 }
+    
+    jnxLsysSpNATsrcruleReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATsrcruleEntry 4 } 
+
+    jnxLsysSpNATsrcruleMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATsrcruleEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-source-rule resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATsrcruleUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-source-rule resource consumption over all LSYS."
+    ::= { jnxLsysSpNATsrcruleSummary 1 }          
+
+    jnxLsysSpNATsrcruleMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-source-rule resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATsrcruleSummary 2 }
+    
+    jnxLsysSpNATsrcruleAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-source-rule resource available in the whole device."
+    ::= { jnxLsysSpNATsrcruleSummary 3 }
+    
+    jnxLsysSpNATsrcruleHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-source-rule resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATsrcruleSummary 4 }
+    
+    jnxLsysSpNATsrcruleHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-source-rule resource."
+    ::= { jnxLsysSpNATsrcruleSummary 5 }
+    
+    jnxLsysSpNATsrcruleLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-source-rule resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATsrcruleSummary 6 }
+    
+    jnxLsysSpNATsrcruleLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-source-rule resource."
+    ::= { jnxLsysSpNATsrcruleSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-source-rule resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-NATSTATICRULE-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-NATSTATICRULE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpNATstaticrule                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpNATstaticruleMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the NAT-static-rule-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security NAT-static-rule resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpNATstaticrule 1 }
+
+    jnxLsysSpNATstaticruleObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATstaticruleMIB 1 }
+    jnxLsysSpNATstaticruleSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATstaticruleMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular NAT-static-rule resource information objects per LSYS:
+--   Below are NAT-static-rule resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The NAT-static-rule resource table per LSYS
+
+    jnxLsysSpNATstaticruleTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpNATstaticruleEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE NAT-static-rule objects for NAT-static-rule 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpNATstaticruleObjects 1 }
+    
+    jnxLsysSpNATstaticruleEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpNATstaticruleEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in NAT-static-rule resource table."
+    INDEX { IMPLIED jnxLsysSpNATstaticruleLsysName }          
+    ::= { jnxLsysSpNATstaticruleTable 1 }          
+
+    JnxLsysSpNATstaticruleEntry ::= 
+       SEQUENCE {
+          jnxLsysSpNATstaticruleLsysName    DisplayString,
+          jnxLsysSpNATstaticruleProfileName DisplayString,
+          jnxLsysSpNATstaticruleUsage       Unsigned32,
+          jnxLsysSpNATstaticruleReserved    Unsigned32,
+          jnxLsysSpNATstaticruleMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the NAT-static-rule resource table
+ 
+    jnxLsysSpNATstaticruleLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which NAT-static-rule 
+             resource information is retrieved. "
+        ::= { jnxLsysSpNATstaticruleEntry 1 }
+
+    jnxLsysSpNATstaticruleProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpNATstaticruleEntry 2 }
+
+    jnxLsysSpNATstaticruleUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpNATstaticruleEntry 3 }
+    
+    jnxLsysSpNATstaticruleReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpNATstaticruleEntry 4 } 
+
+    jnxLsysSpNATstaticruleMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpNATstaticruleEntry 5 }
+
+
+-- **********************************************************************
+-- The NAT-static-rule resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpNATstaticruleUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The NAT-static-rule resource consumption over all LSYS."
+    ::= { jnxLsysSpNATstaticruleSummary 1 }          
+
+    jnxLsysSpNATstaticruleMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-static-rule resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpNATstaticruleSummary 2 }
+    
+    jnxLsysSpNATstaticruleAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The NAT-static-rule resource available in the whole device."
+    ::= { jnxLsysSpNATstaticruleSummary 3 }
+    
+    jnxLsysSpNATstaticruleHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of NAT-static-rule resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATstaticruleSummary 4 }
+    
+    jnxLsysSpNATstaticruleHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most NAT-static-rule resource."
+    ::= { jnxLsysSpNATstaticruleSummary 5 }
+    
+    jnxLsysSpNATstaticruleLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of NAT-static-rule resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpNATstaticruleSummary 6 }
+    
+    jnxLsysSpNATstaticruleLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least NAT-static-rule resource."
+    ::= { jnxLsysSpNATstaticruleSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of NAT-static-rule resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-POLICY-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-POLICY-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpPolicy                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpPolicyMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- July 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the policy-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security policy resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpPolicy 1 }
+
+    jnxLsysSpPolicyObjects        OBJECT IDENTIFIER ::= { jnxLsysSpPolicyMIB 1 }
+    jnxLsysSpPolicySummary        OBJECT IDENTIFIER ::= { jnxLsysSpPolicyMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular policy resource information objects per LSYS:
+--   Below are policy resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- policy resource table per LSYS
+
+    jnxLsysSpPolicyTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpPolicyEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE policy objects for policy resource consumption per LSYS."  
+    ::= { jnxLsysSpPolicyObjects 1 }
+    
+    jnxLsysSpPolicyEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpPolicyEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in policy resource table."
+    INDEX { IMPLIED jnxLsysSpPolicyLsysName }          
+    ::= { jnxLsysSpPolicyTable 1 }          
+
+    JnxLsysSpPolicyEntry ::= 
+       SEQUENCE {
+          jnxLsysSpPolicyLsysName    DisplayString,
+          jnxLsysSpPolicyProfileName DisplayString,
+          jnxLsysSpPolicyUsage       Unsigned32,
+          jnxLsysSpPolicyReserved    Unsigned32,
+          jnxLsysSpPolicyMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the policy resource table
+ 
+    jnxLsysSpPolicyLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which policy resource information is retrieved. "
+        ::= { jnxLsysSpPolicyEntry 1 }
+
+    jnxLsysSpPolicyProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpPolicyEntry 2 }
+
+    jnxLsysSpPolicyUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpPolicyEntry 3 }
+    
+    jnxLsysSpPolicyReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpPolicyEntry 4 } 
+
+    jnxLsysSpPolicyMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpPolicyEntry 5 }
+
+
+-- **********************************************************************
+-- policy resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpPolicyUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The policy resource consumption over all LSYS."
+    ::= { jnxLsysSpPolicySummary 1 }          
+
+    jnxLsysSpPolicyMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The policy resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpPolicySummary 2 }
+    
+    jnxLsysSpPolicyAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The policy resource available in the whole device."
+    ::= { jnxLsysSpPolicySummary 3 }
+    
+    jnxLsysSpPolicyHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of policy resource consumed of a LSYS."
+    ::= { jnxLsysSpPolicySummary 4 }
+    
+    jnxLsysSpPolicyHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most policy resource."
+    ::= { jnxLsysSpPolicySummary 5 }
+    
+    jnxLsysSpPolicyLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of policy resource consumed of a LSYS."
+    ::= { jnxLsysSpPolicySummary 6 }
+    
+    jnxLsysSpPolicyLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least policy resource."
+    ::= { jnxLsysSpPolicySummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of policy resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-POLICYWCNT-MIB

@@ -0,0 +1,199 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-POLICYWCNT-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpPolicywcnt                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpPolicywcntMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the policy-with-count-specific MIB for 
+             Juniper Enterprise Logical-System (LSYS) security profiles.  
+             Juniper documentation is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security policy-with-count resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpPolicywcnt 1 }
+
+    jnxLsysSpPolicywcntObjects  OBJECT IDENTIFIER ::= { jnxLsysSpPolicywcntMIB 1 }
+    jnxLsysSpPolicywcntSummary  OBJECT IDENTIFIER ::= { jnxLsysSpPolicywcntMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular policy-with-count resource information objects per LSYS:
+--   Below are policy-with-count resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- The policy-with-count resource table per LSYS
+
+    jnxLsysSpPolicywcntTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpPolicywcntEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE policy-with-count objects for policy-with-count 
+             resource consumption per LSYS."  
+    ::= { jnxLsysSpPolicywcntObjects 1 }
+    
+    jnxLsysSpPolicywcntEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpPolicywcntEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in policy-with-count resource table."
+    INDEX { IMPLIED jnxLsysSpPolicywcntLsysName }          
+    ::= { jnxLsysSpPolicywcntTable 1 }          
+
+    JnxLsysSpPolicywcntEntry ::= 
+       SEQUENCE {
+          jnxLsysSpPolicywcntLsysName    DisplayString,
+          jnxLsysSpPolicywcntProfileName DisplayString,
+          jnxLsysSpPolicywcntUsage       Unsigned32,
+          jnxLsysSpPolicywcntReserved    Unsigned32,
+          jnxLsysSpPolicywcntMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the policy-with-count resource table
+ 
+    jnxLsysSpPolicywcntLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which policy-with-count 
+             resource information is retrieved. "
+        ::= { jnxLsysSpPolicywcntEntry 1 }
+
+    jnxLsysSpPolicywcntProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpPolicywcntEntry 2 }
+
+    jnxLsysSpPolicywcntUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpPolicywcntEntry 3 }
+    
+    jnxLsysSpPolicywcntReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpPolicywcntEntry 4 } 
+
+    jnxLsysSpPolicywcntMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpPolicywcntEntry 5 }
+
+
+-- **********************************************************************
+-- The policy-with-count resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpPolicywcntUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The policy-with-count resource consumption over all LSYS."
+    ::= { jnxLsysSpPolicywcntSummary 1 }          
+
+    jnxLsysSpPolicywcntMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The policy-with-count resource maximum quota for the whole 
+            device for all LSYS."
+    ::= { jnxLsysSpPolicywcntSummary 2 }
+    
+    jnxLsysSpPolicywcntAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The policy-with-count resource available in the whole device."
+    ::= { jnxLsysSpPolicywcntSummary 3 }
+    
+    jnxLsysSpPolicywcntHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of policy-with-count resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpPolicywcntSummary 4 }
+    
+    jnxLsysSpPolicywcntHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most policy-with-count resource."
+    ::= { jnxLsysSpPolicywcntSummary 5 }
+    
+    jnxLsysSpPolicywcntLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of policy-with-count resource consumed of a 
+            LSYS."
+    ::= { jnxLsysSpPolicywcntSummary 6 }
+    
+    jnxLsysSpPolicywcntLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least policy-with-count resource."
+    ::= { jnxLsysSpPolicywcntSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of policy-with-count resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-SCHEDULER-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-SCHEDULER-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpScheduler                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpSchedulerMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- July 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the scheduler-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security scheduler resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpScheduler 1 }
+
+    jnxLsysSpSchedulerObjects        OBJECT IDENTIFIER ::= { jnxLsysSpSchedulerMIB 1 }
+    jnxLsysSpSchedulerSummary        OBJECT IDENTIFIER ::= { jnxLsysSpSchedulerMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular scheduler resource information objects per LSYS:
+--   Below are scheduler resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- scheduler resource table per LSYS
+
+    jnxLsysSpSchedulerTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpSchedulerEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE scheduler objects for scheduler resource consumption per LSYS."  
+    ::= { jnxLsysSpSchedulerObjects 1 }
+    
+    jnxLsysSpSchedulerEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpSchedulerEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in scheduler resource table."
+    INDEX { IMPLIED jnxLsysSpSchedulerLsysName }          
+    ::= { jnxLsysSpSchedulerTable 1 }          
+
+    JnxLsysSpSchedulerEntry ::= 
+       SEQUENCE {
+          jnxLsysSpSchedulerLsysName    DisplayString,
+          jnxLsysSpSchedulerProfileName DisplayString,
+          jnxLsysSpSchedulerUsage       Unsigned32,
+          jnxLsysSpSchedulerReserved    Unsigned32,
+          jnxLsysSpSchedulerMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the scheduler resource table
+ 
+    jnxLsysSpSchedulerLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which scheduler resource information is retrieved. "
+        ::= { jnxLsysSpSchedulerEntry 1 }
+
+    jnxLsysSpSchedulerProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpSchedulerEntry 2 }
+
+    jnxLsysSpSchedulerUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpSchedulerEntry 3 }
+    
+    jnxLsysSpSchedulerReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpSchedulerEntry 4 } 
+
+    jnxLsysSpSchedulerMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpSchedulerEntry 5 }
+
+
+-- **********************************************************************
+-- scheduler resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpSchedulerUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The scheduler resource consumption over all LSYS."
+    ::= { jnxLsysSpSchedulerSummary 1 }          
+
+    jnxLsysSpSchedulerMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The scheduler resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpSchedulerSummary 2 }
+    
+    jnxLsysSpSchedulerAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The scheduler resource available in the whole device."
+    ::= { jnxLsysSpSchedulerSummary 3 }
+    
+    jnxLsysSpSchedulerHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of scheduler resource consumed of a LSYS."
+    ::= { jnxLsysSpSchedulerSummary 4 }
+    
+    jnxLsysSpSchedulerHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most scheduler resource."
+    ::= { jnxLsysSpSchedulerSummary 5 }
+    
+    jnxLsysSpSchedulerLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of scheduler resource consumed of a LSYS."
+    ::= { jnxLsysSpSchedulerSummary 6 }
+    
+    jnxLsysSpSchedulerLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least scheduler resource."
+    ::= { jnxLsysSpSchedulerSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of scheduler resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-SECUREWIRE-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+--
+-- Copyright (c) 2019-2020, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-SECUREWIRE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpSecurewire
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+
+    jnxLsysSpSecurewireMIB MODULE-IDENTITY
+        LAST-UPDATED  "201903291644Z" -- March 29, 2019
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the secure-wire-specific MIB for Juniper Enterprise
+             Logical-System (LSYS) security profiles.  Juniper documentation
+             is recommended as the reference.
+
+             The LSYS security profile provides various static and dynamic
+             resource management by observing resource quota limits.
+             Security secure-wire resource is the focus in this MIB.
+            "
+        ::= { jnxLsysSpSecurewire 1 }
+
+    jnxLsysSpSecurewireObjects        OBJECT IDENTIFIER ::= { jnxLsysSpSecurewireMIB 1 }
+    jnxLsysSpSecurewireSummary        OBJECT IDENTIFIER ::= { jnxLsysSpSecurewireMIB 2 }
+
+
+-- **********************************************************************
+-- Tabular secure-wire resource information objects per LSYS:
+--   Below are secure-wire resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- Securewire resource table per LSYS
+
+    jnxLsysSpSecurewireTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpSecurewireEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "LSYSPROFILE secure-wire objects for secure-wire resource consumption per LSYS."
+    ::= { jnxLsysSpSecurewireObjects 1 }
+
+    jnxLsysSpSecurewireEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpSecurewireEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "An entry in secure-wire resource table."
+    INDEX { IMPLIED jnxLsysSpSecurewireLsysName }
+    ::= { jnxLsysSpSecurewireTable 1 }
+
+    JnxLsysSpSecurewireEntry ::=
+       SEQUENCE {
+          jnxLsysSpSecurewireLsysName    DisplayString,
+          jnxLsysSpSecurewireProfileName DisplayString,
+          jnxLsysSpSecurewireUsage       Unsigned32,
+          jnxLsysSpSecurewireReserved    Unsigned32,
+          jnxLsysSpSecurewireMaximum     Unsigned32
+    }
+
+-- Entry definitions for the secure-wire resource table
+
+    jnxLsysSpSecurewireLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which secure-wire resource information is retrieved. "
+        ::= { jnxLsysSpSecurewireEntry 1 }
+
+    jnxLsysSpSecurewireProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpSecurewireEntry 2 }
+
+    jnxLsysSpSecurewireUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpSecurewireEntry 3 }
+
+    jnxLsysSpSecurewireReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpSecurewireEntry 4 }
+
+    jnxLsysSpSecurewireMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpSecurewireEntry 5 }
+
+
+-- **********************************************************************
+-- Securewire resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpSecurewireUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The secure-wire resource consumption over all LSYS."
+    ::= { jnxLsysSpSecurewireSummary 1 }
+
+    jnxLsysSpSecurewireMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The secure-wire resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpSecurewireSummary 2 }
+
+    jnxLsysSpSecurewireAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The secure-wire resource available in the whole device."
+    ::= { jnxLsysSpSecurewireSummary 3 }
+
+    jnxLsysSpSecurewireHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The most amount of secure-wire resource consumed of a LSYS."
+    ::= { jnxLsysSpSecurewireSummary 4 }
+
+    jnxLsysSpSecurewireHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The LSYS name that consume the most secure-wire resource."
+    ::= { jnxLsysSpSecurewireSummary 5 }
+
+    jnxLsysSpSecurewireLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The least amount of secure-wire resource consumed of a LSYS."
+    ::= { jnxLsysSpSecurewireSummary 6 }
+
+    jnxLsysSpSecurewireLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The LSYS name that consume the least secure-wire resource."
+    ::= { jnxLsysSpSecurewireSummary 7 }
+
+
+
+ -- ***************************************************************
+ -- definition of secure-wire resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File
+--
+
+END

mibs/juniper/JUNIPER-LSYSSP-ZONE-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSP-ZONE-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpZone                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpZoneMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- May 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the zone-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security zone resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpZone 1 }
+
+    jnxLsysSpZoneObjects        OBJECT IDENTIFIER ::= { jnxLsysSpZoneMIB 1 }
+    jnxLsysSpZoneSummary        OBJECT IDENTIFIER ::= { jnxLsysSpZoneMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular zone resource information objects per LSYS:
+--   Below are zone resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- Zone resource table per LSYS
+
+    jnxLsysSpZoneTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpZoneEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE zone objects for zone resource consumption per LSYS."  
+    ::= { jnxLsysSpZoneObjects 1 }
+    
+    jnxLsysSpZoneEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpZoneEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in zone resource table."
+    INDEX { IMPLIED jnxLsysSpZoneLsysName }          
+    ::= { jnxLsysSpZoneTable 1 }          
+
+    JnxLsysSpZoneEntry ::= 
+       SEQUENCE {
+          jnxLsysSpZoneLsysName    DisplayString,
+          jnxLsysSpZoneProfileName DisplayString,
+          jnxLsysSpZoneUsage       Unsigned32,
+          jnxLsysSpZoneReserved    Unsigned32,
+          jnxLsysSpZoneMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the zone resource table
+ 
+    jnxLsysSpZoneLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which zone resource information is retrieved. "
+        ::= { jnxLsysSpZoneEntry 1 }
+
+    jnxLsysSpZoneProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpZoneEntry 2 }
+
+    jnxLsysSpZoneUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpZoneEntry 3 }
+    
+    jnxLsysSpZoneReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpZoneEntry 4 } 
+
+    jnxLsysSpZoneMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpZoneEntry 5 }
+
+
+-- **********************************************************************
+-- Zone resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpZoneUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The zone resource consumption over all LSYS."
+    ::= { jnxLsysSpZoneSummary 1 }          
+
+    jnxLsysSpZoneMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The zone resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpZoneSummary 2 }
+    
+    jnxLsysSpZoneAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The zone resource available in the whole device."
+    ::= { jnxLsysSpZoneSummary 3 }
+    
+    jnxLsysSpZoneHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of zone resource consumed of a LSYS."
+    ::= { jnxLsysSpZoneSummary 4 }
+    
+    jnxLsysSpZoneHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most zone resource."
+    ::= { jnxLsysSpZoneSummary 5 }
+    
+    jnxLsysSpZoneLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of zone resource consumed of a LSYS."
+    ::= { jnxLsysSpZoneSummary 6 }
+    
+    jnxLsysSpZoneLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least zone resource."
+    ::= { jnxLsysSpZoneSummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of zone resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-LSYSSPAUTHENTRY-MIB

@@ -0,0 +1,194 @@
+--
+-- Juniper Enterprise Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2010-2011, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+
+JUNIPER-LSYSSPAUTHENTRY-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+      Unsigned32
+        FROM SNMPv2-SMI
+      DisplayString
+        FROM SNMPv2-TC
+      jnxLsysSpAuthentry                  
+        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
+    ;
+    
+    jnxLsysSpAuthentryMIB MODULE-IDENTITY
+        LAST-UPDATED  "201005191644Z" -- July 19, 2010
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+        DESCRIPTION
+            "This module defines the auth-entry-specific MIB for Juniper Enterprise 
+             Logical-System (LSYS) security profiles.  Juniper documentation 
+             is recommended as the reference. 
+
+             The LSYS security profile provides various static and dynamic 
+             resource management by observing resource quota limits. 
+             Security auth-entry resource is the focus in this MIB. 
+            "
+        ::= { jnxLsysSpAuthentry 1 }
+
+    jnxLsysSpAuthentryObjects        OBJECT IDENTIFIER ::= { jnxLsysSpAuthentryMIB 1 }
+    jnxLsysSpAuthentrySummary        OBJECT IDENTIFIER ::= { jnxLsysSpAuthentryMIB 2 }
+    
+ 
+-- **********************************************************************
+-- Tabular auth-entry resource information objects per LSYS:
+--   Below are auth-entry resource table indexed by LSYS name.
+-- **********************************************************************
+
+-- auth-entry resource table per LSYS
+
+    jnxLsysSpAuthentryTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF JnxLsysSpAuthentryEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION 
+            "LSYSPROFILE auth-entry objects for auth-entry resource consumption per LSYS."  
+    ::= { jnxLsysSpAuthentryObjects 1 }
+    
+    jnxLsysSpAuthentryEntry OBJECT-TYPE
+        SYNTAX              JnxLsysSpAuthentryEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION  
+            "An entry in auth-entry resource table."
+    INDEX { IMPLIED jnxLsysSpAuthentryLsysName }          
+    ::= { jnxLsysSpAuthentryTable 1 }          
+
+    JnxLsysSpAuthentryEntry ::= 
+       SEQUENCE {
+          jnxLsysSpAuthentryLsysName    DisplayString,
+          jnxLsysSpAuthentryProfileName DisplayString,
+          jnxLsysSpAuthentryUsage       Unsigned32,
+          jnxLsysSpAuthentryReserved    Unsigned32,
+          jnxLsysSpAuthentryMaximum     Unsigned32
+    }   
+ 
+-- Entry definitions for the auth-entry resource table
+ 
+    jnxLsysSpAuthentryLsysName       OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..64))
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+            "The name of the logical system for which auth-entry resource information is retrieved. "
+        ::= { jnxLsysSpAuthentryEntry 1 }
+
+    jnxLsysSpAuthentryProfileName    OBJECT-TYPE
+        SYNTAX              DisplayString (SIZE(1..32))
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The security profile name string for the LSYS."
+    ::= { jnxLsysSpAuthentryEntry 2 }
+
+    jnxLsysSpAuthentryUsage          OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION  
+            "The current resource usage count for the LSYS."
+    ::= { jnxLsysSpAuthentryEntry 3 }
+    
+    jnxLsysSpAuthentryReserved       OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The reserved resource count for the LSYS."
+    ::= { jnxLsysSpAuthentryEntry 4 } 
+
+    jnxLsysSpAuthentryMaximum        OBJECT-TYPE
+        SYNTAX              Unsigned32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+            "The maximum allowed resource usage count for the LSYS."
+    ::= { jnxLsysSpAuthentryEntry 5 }
+
+
+-- **********************************************************************
+-- auth-entry resource information summary:
+-- **********************************************************************
+
+    jnxLsysSpAuthentryUsedAmount         OBJECT-TYPE
+        SYNTAX                  Unsigned32 
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "The auth-entry resource consumption over all LSYS."
+    ::= { jnxLsysSpAuthentrySummary 1 }          
+
+    jnxLsysSpAuthentryMaxQuota           OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The auth-entry resource maximum quota for the whole device for all LSYS."
+    ::= { jnxLsysSpAuthentrySummary 2 }
+    
+    jnxLsysSpAuthentryAvailableAmount    OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The auth-entry resource available in the whole device."
+    ::= { jnxLsysSpAuthentrySummary 3 }
+    
+    jnxLsysSpAuthentryHeaviestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The most amount of auth-entry resource consumed of a LSYS."
+    ::= { jnxLsysSpAuthentrySummary 4 }
+    
+    jnxLsysSpAuthentryHeaviestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the most auth-entry resource."
+    ::= { jnxLsysSpAuthentrySummary 5 }
+    
+    jnxLsysSpAuthentryLightestUsage      OBJECT-TYPE
+        SYNTAX                  Unsigned32
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The least amount of auth-entry resource consumed of a LSYS."
+    ::= { jnxLsysSpAuthentrySummary 6 }
+    
+    jnxLsysSpAuthentryLightestUser       OBJECT-TYPE
+        SYNTAX                  DisplayString (SIZE(1..64))
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION 
+           "The LSYS name that consume the least auth-entry resource."
+    ::= { jnxLsysSpAuthentrySummary 7 }
+    
+
+
+ -- ***************************************************************
+ -- definition of auth-entry resource related traps. (TBD)
+ -- ***************************************************************
+
+--
+-- End of File 
+--
+
+END

mibs/juniper/JUNIPER-MAC-MIB

@@ -0,0 +1,150 @@
+--
+-- Juniper Enterprise Specific MIB: Ethernet MAC MIB
+-- 
+-- Copyright (c) 2002-2003, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-MAC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter64,
+    Unsigned32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    ifIndex
+        FROM IF-MIB
+    jnxMibs 
+        FROM JUNIPER-SMI;
+
+jnxMac MODULE-IDENTITY
+    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:55 2003 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+            "        Juniper Technical Assistance Center
+		     Juniper Networks, Inc.
+		     1133 Innovation Way
+		     Sunnyvale, CA 94089
+		     E-mail: support@juniper.net"
+
+    DESCRIPTION
+            "This is Juniper Networks' implementation of enterprise
+	     specific MIB for Ethernet Mac Stats"
+
+    -- revision history
+    REVISION "200210100000Z"    -- 10 October, 2002
+    DESCRIPTION
+            "MacStats MIB added."
+
+    ::= { jnxMibs 23 }
+
+JnxVlanIndex ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value used to index per-VLAN tables. A values of 0 
+        is not permitted. The value of 4095 is reserved
+        for untagged interfaces; if the value is between 1 and
+        4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
+        global scope within a given bridged domain (see VlanId
+        textual convention).  If the value is greater than 4095
+        then it represents a VLAN with scope local to the
+        particular agent, i.e. one without a global VLAN-ID
+        assigned to it. Such VLANs are outside the scope of
+        IEEE 802.1Q but it is convenient to be able to manage them
+        in the same way using this MIB."
+    SYNTAX      Unsigned32
+
+
+-- MacStatsTable
+
+    jnxMacStats OBJECT IDENTIFIER ::= { jnxMac 1 }
+
+-- Mac Statistics table contains statistics information on the entity's
+-- GE PIC.
+-- The stats (inoctets, inframes, outoctets, outpframes)
+-- are the stats value for each src mac address and vlan id 
+-- by mac learning process on ethernet ports.
+
+-- The order of index is "ifIndex, jnxVlanIndex, jnxSourceMacAddress"
+-- for the preference on grouping vlan-based stats and accounting.
+
+    jnxMacStatsTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF JnxMacStatsEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+                  "a list of MacStats entry for GE ethernet interfaces"
+        ::= { jnxMacStats 1 }
+
+    jnxMacStatsEntry OBJECT-TYPE
+        SYNTAX     JnxMacStatsEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "An entry containing statistics information applicable to a
+            particular GE ethernet interfaces."
+        INDEX   { ifIndex, jnxVlanIndex, jnxSourceMacAddress }
+        ::= { jnxMacStatsTable 1 }
+
+    JnxMacStatsEntry ::=
+        SEQUENCE {
+            jnxVlanIndex                 JnxVlanIndex,
+            jnxSourceMacAddress          MacAddress,
+            jnxMacHCInOctets             Counter64,
+            jnxMacHCInFrames             Counter64,
+            jnxMacHCOutOctets            Counter64,
+            jnxMacHCOutFrames            Counter64
+        }
+
+    jnxVlanIndex OBJECT-TYPE
+        SYNTAX      JnxVlanIndex
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The VLAN ID refering to this VLAN."
+        ::= { jnxMacStatsEntry 1 }
+
+    jnxSourceMacAddress OBJECT-TYPE
+        SYNTAX      MacAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The Source MAC address."
+        ::= { jnxMacStatsEntry 2 }
+
+    jnxMacHCInOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of total octets received in this VLAN/MAC Address."
+        ::= { jnxMacStatsEntry 3 }
+
+    jnxMacHCInFrames OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of total frames received in this VLAN/MAC Address."
+        ::= { jnxMacStatsEntry 4 }
+
+    jnxMacHCOutOctets OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of total octets transmitted in this VLAN/MAC Address."
+        ::= { jnxMacStatsEntry 5 }
+
+    jnxMacHCOutFrames OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of total frames transmitted in this VLAN/MAC Address."
+        ::= { jnxMacStatsEntry 6 }
+
+END

mibs/juniper/JUNIPER-MAG-MIB

@@ -0,0 +1,89 @@
+-- *******************************************************************
+-- Juniper enterprise specific Access Authentication objects MIB.
+--
+-- Copyright (c) 2001-2010, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+-- *******************************************************************
+
+    JUNIPER-MAG-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+        Counter32, IpAddress, Integer32,
+        NOTIFICATION-TYPE, MODULE-IDENTITY,
+        OBJECT-TYPE
+            FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION, DisplayString
+            FROM SNMPv2-TC
+
+        jnxMagMibRoot
+            FROM JUNIPER-SMI;
+
+
+    jnxMagMib  MODULE-IDENTITY
+        LAST-UPDATED  "201002201210Z"
+        ORGANIZATION  "Juniper Networks, Inc."
+        CONTACT-INFO
+            "Juniper Technical Assistance Center
+             Juniper Networks, Inc.
+             1133 Innovation Way
+             Sunnyvale, CA 94089
+
+             E-mail: support@juniper.net
+             HTTP://www.juniper.net"
+
+        DESCRIPTION
+            "These MIB objects pertain to Secure access,
+             infranet controller and WAN acceleration service
+             modules?"
+
+        REVISION      "201002201200Z"
+        DESCRIPTION   "Creation Date"
+        ::= { jnxMagMibRoot 1 }
+
+
+    jnxMagNotifications OBJECT IDENTIFIER ::= { jnxMagMib 0 }
+    jnxMagObjects       OBJECT IDENTIFIER ::= { jnxMagMib 1 }
+
+    -- ***************************************************************
+    --  Next Branch node.
+    -- ***************************************************************
+
+    jnxMagSSOObjects OBJECT IDENTIFIER ::= { jnxMagObjects 1 }
+
+
+    -- ***************************************************************
+    -- Single Sign-on Statistics
+    -- ***************************************************************
+
+
+    jnxMagSSOAuthTokenAttempt OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+        "Number of Auth Token attempts made"
+        ::= { jnxMagSSOObjects 1 }
+
+
+    jnxMagSSOFailedAuthToken OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+        "Number of Failed Auth Token "
+        ::= { jnxMagSSOObjects 2 }
+
+
+    -- ***************************************************************
+    -- MAG Notfications
+    -- ***************************************************************
+
+    jnxMagSSOValidationError NOTIFICATION-TYPE
+       STATUS  current
+       DESCRIPTION
+       " Auth Token Validation error"
+       ::= { jnxMagNotifications 1 }
+
+END

mibs/juniper/JUNIPER-MBG-SMI

@@ -0,0 +1,60 @@
+--
+-- Juniper Mobile Gateway Specific MIB: Structure of Management Information
+-- 
+-- Copyright (c) 2011-2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-MBG-SMI DEFINITIONS ::= BEGIN
+
+IMPORTS
+       jnxMobileGatewayMibRoot, jnxJunosSpace FROM JUNIPER-SMI;
+
+--
+-- Object identifier added as the basis for
+-- identifying different Mobile Gateway nodes.
+-- 
+--
+-- This will be used as a root all the PDN-GW/GGSN MIBs.
+--
+jnxMobileGatewayPgwGgsn OBJECT IDENTIFIER
+    ::= { jnxMobileGatewayMibRoot 1 }
+--
+-- This will be used as a root all the Serving Gateway MIBs.
+--
+jnxMobileGatewaySgw OBJECT IDENTIFIER
+    ::= { jnxMobileGatewayMibRoot 2 }
+
+--
+-- This is the root of all EMS MIBs exposed for Mobility from Junos Space
+--
+jnxJunosSpaceMobility OBJECT IDENTIFIER ::= {jnxJunosSpace  2 }
+
+--
+-- This is the root of all EMS level Notifications for Mobility from Junos Space
+--
+jnxJunosSpaceMobilityNotifications OBJECT IDENTIFIER ::= {jnxJunosSpaceMobility  1 }
+
+--
+-- This is the root of all EMS level Objects for Mobility from Junos Space
+--
+jnxJunosSpaceMobilityObjects OBJECT IDENTIFIER ::= {jnxJunosSpaceMobility  2 }
+
+--
+-- Reserved OID for Mobility application Mobile Core Manager from Junos Space
+--
+jnxJunosSpaceMobilityMCM OBJECT IDENTIFIER ::= {jnxJunosSpaceMobility  3 }
+
+--
+-- Reserved OID for Mobility application Mobile Traffic Monitoring from Junos Space
+--
+jnxJunosSpaceMobilityMTM OBJECT IDENTIFIER ::= {jnxJunosSpaceMobility  4 }
+
+--
+-- This is the root of all EMS level Notification Vars for Mobility from Junos Space
+--
+jnxJunosSpaceMobilityNotificationvars OBJECT IDENTIFIER ::= { jnxJunosSpaceMobilityObjects 1 }
+   
+END 

mibs/juniper/JUNIPER-MOBILE-GATEWAY-DHCP-MIB

@@ -0,0 +1,130 @@
+--
+-- Juniper Mobile Gateway Shared Memory IP pool objects MIB.
+--
+-- Copyright (c) 2010-2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-MOBILE-GATEWAY-DHCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+Counter64, Integer32, Unsigned32,
+    NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, IpAddress
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION, DisplayString, TruthValue
+        FROM SNMPv2-TC
+
+    InetAddressType, InetAddress, InetAddressPrefixLength
+        FROM INET-ADDRESS-MIB
+
+    jnxMobileGatewayMibRoot	
+        FROM JUNIPER-SMI;
+
+jnxMbgDhcpMib MODULE-IDENTITY
+    LAST-UPDATED "201103301200Z" -- Mar 30, 2011, 12:00:00 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+        "Juniper Technical Assistance Center
+         Juniper Networks, Inc.
+         1133 Innovation Way
+         Sunnyvale, CA 94089
+         E-mail: support@juniper.net"
+    DESCRIPTION
+        "This module defines objects pertaining to Mobile-Edge
+         DHCP Services"
+    REVISION "201103301200Z" -- Mar 30, 2011, 12:00:00
+    DESCRIPTION "Initial version"
+
+    ::= { jnxMobileGatewayMibRoot 8 }
+
+jnxMbgDhcpNotifications          OBJECT IDENTIFIER ::= 
+                                         { jnxMbgDhcpMib 0 }
+jnxMbgDhcpObjects                OBJECT IDENTIFIER ::=
+                                         { jnxMbgDhcpMib 1 }
+jnxMbgDhcpNotificationVars       OBJECT IDENTIFIER ::=
+                                         { jnxMbgDhcpObjects 1 }
+--
+-- Objects used in Notifications
+--
+
+jnxMbgDhcpServerIP OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "IP address of the dhcp server."
+    ::= { jnxMbgDhcpNotificationVars 1 }
+
+jnxMbgDhcpLogicalSystemName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The name which identifies the logical-system
+         on the mobile-gateway"
+    ::= { jnxMbgDhcpNotificationVars 2 }
+
+jnxMbgDhcpRoutingInstanceName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The name which identifies the routing instance
+         on the mobile-gateway."
+    ::= { jnxMbgDhcpNotificationVars 3 }
+
+jnxMbgDhcpProfileName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The configured dhcp profile name"
+    ::= { jnxMbgDhcpNotificationVars 4 }
+
+jnxMbgDhcpPoolName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The configured dhcp pool name with in a dhcp profile" 
+    ::= { jnxMbgDhcpNotificationVars 5 }
+
+jnxMbgDhcpReachability OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "True  - The server is reachable
+         False - The server is unreachable."
+    ::= { jnxMbgDhcpNotificationVars 6 }
+--
+-- Notifications
+--
+jnxMbgDhcpServerReachability NOTIFICATION-TYPE
+    OBJECTS     { jnxMbgDhcpServerIP,
+                  jnxMbgDhcpLogicalSystemName,
+                  jnxMbgDhcpRoutingInstanceName,
+                  jnxMbgDhcpProfileName,
+                  jnxMbgDhcpReachability }
+    STATUS      current
+    DESCRIPTION
+        "This notification is used to notify if the given
+         dhcp server is reachable/unreachable."
+    ::= { jnxMbgDhcpNotifications 1 }
+
+jnxMbgDhcpAddrPoolExhaust NOTIFICATION-TYPE
+    OBJECTS     { jnxMbgDhcpServerIP,
+                  jnxMbgDhcpLogicalSystemName,
+                  jnxMbgDhcpRoutingInstanceName,
+                  jnxMbgDhcpProfileName,
+                  jnxMbgDhcpPoolName }
+    STATUS      current
+    DESCRIPTION
+        "This notification signifies that the addresses
+         from a given address pool have exhusted."
+    ::= { jnxMbgDhcpNotifications 2 }
+
+END

mibs/juniper/JUNIPER-MOBILE-GATEWAY-EXAMPLE-MIB

@@ -0,0 +1,236 @@
+--
+-- Juniper Mobile Gateway EXAMPLE objects MIB.
+--
+-- Copyright (c) 2010-2013, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-MOBILE-GATEWAY-EXAMPLE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Counter64, IpAddress, Integer32, Counter32, Unsigned32,
+    NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue
+        FROM SNMPv2-TC
+
+    Ipv6AddressPrefix, Ipv6AddressIfIdentifier, Ipv6Address
+        FROM IPV6-TC
+
+    InetAddressType, InetAddress, InetPortNumber, InetAddressPrefixLength
+        FROM INET-ADDRESS-MIB
+
+    EnabledStatus
+        FROM JUNIPER-MIMSTP-MIB
+
+    jnxExampleMibRoot
+        FROM JUNIPER-EXPERIMENT-MIB;
+
+jnxMobileGatewayExampleMib MODULE-IDENTITY
+    LAST-UPDATED "201011221200Z" -- Nov 22, 2010, 12:00:00 UTC
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+        "Juniper Technical Assistance Center
+         Juniper Networks, Inc.
+         1133 Innovation Way
+         Sunnyvale, CA 94089
+         E-mail: support@juniper.net"
+    DESCRIPTION
+        "This module defines some sample objects pertaining to Mobile-Edge Services."
+    REVISION "201011221200Z" -- Nov 22, 2010, 12:00:00
+    DESCRIPTION "Initial version"
+
+    ::= { jnxExampleMibRoot 2 }
+
+
+jnxMobileGatewayExampleObjects       OBJECT IDENTIFIER ::= 
+                                                { jnxMobileGatewayExampleMib 1 }
+jnxMobileGatewayExampleNotifications OBJECT IDENTIFIER ::=
+                                                { jnxMobileGatewayExampleMib 2 }
+
+jnxMobileGatewayExampleSyncStats OBJECT IDENTIFIER ::= 
+                                            { jnxMobileGatewayExampleObjects 1 }
+jnxMobileGatewayExampleAsyncStats OBJECT IDENTIFIER ::= 
+                                            { jnxMobileGatewayExampleObjects 2 }
+
+jnxMobileGatewayProfileTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF JnxMobileGatewayProfileEntry
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The table listing Mobile Gateway Test Profiles, key is Profile Name."
+    ::= { jnxMobileGatewayExampleObjects 3 }
+
+jnxMobileGatewayExampleNotificationVars OBJECT IDENTIFIER ::=
+                                            { jnxMobileGatewayExampleObjects 4 }
+
+
+--
+-- Global counters that are returned by mobiled test module in a synchronous manner
+--
+
+jnxMobileGatewayTotalRequests OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total requests made."
+    ::= { jnxMobileGatewayExampleSyncStats 1 }
+
+jnxMobileGatewayTotalAccepts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total requests that were accepted."
+    ::= { jnxMobileGatewayExampleSyncStats 2 }
+
+jnxMobileGatewayTotalRejects OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total requests that were rejected."
+    ::= { jnxMobileGatewayExampleSyncStats 3 }
+
+jnxMobileGatewayTotalChallenges OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total challenges received."
+    ::= { jnxMobileGatewayExampleSyncStats 4 }
+
+
+--
+-- Global counters that are returned by mobiled test module in an async manner.
+-- test module queries Service PICs and aggregates their responses before sending
+-- data to snmp.
+--
+
+jnxMobileGatewayTotalRequestTimeouts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total  requests that timed out."
+    ::= { jnxMobileGatewayExampleAsyncStats 1 }
+
+jnxMobileGatewayTotalRequestTxErrors OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total  requests transmit errors."
+    ::= { jnxMobileGatewayExampleAsyncStats 2 }
+
+jnxMobileGatewayTotalResponseErrors OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total  response errors."
+    ::= { jnxMobileGatewayExampleAsyncStats 3 }
+
+jnxMobileGatewayTotalPendingRequests OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total pending requests."
+    ::= { jnxMobileGatewayExampleAsyncStats 4 }
+
+--
+-- Profile Table
+-- This table contains the attributes of mobile-gateway test profiles.
+-- mobiled test module queries the service PICS for this information and 
+-- conveys this data to snmp in an asynchronous manner
+--
+jnxMobileGatewayProfileEntry OBJECT-TYPE
+    SYNTAX      JnxMobileGatewayProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry representing a Mobile Gateway Test Profile."
+    INDEX       { jnxMobileGatewayProfileName }
+    ::= { jnxMobileGatewayProfileTable 1 }
+
+JnxMobileGatewayProfileEntry ::= SEQUENCE {
+    jnxMobileGatewayProfileName              DisplayString,
+    jnxMobileGatewayProfileDescription       DisplayString,
+    jnxMobileGatewayProfileType              Integer32 
+}
+
+
+jnxMobileGatewayProfileName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A string that uniquely identifies the Test Profile."
+    ::= { jnxMobileGatewayProfileEntry 1 }
+
+jnxMobileGatewayProfileDescription OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A string that describes the Test Profile."
+    ::= { jnxMobileGatewayProfileEntry 2 }
+
+jnxMobileGatewayProfileType OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Test Profile Type."
+    ::= { jnxMobileGatewayProfileEntry 3 }
+
+--
+-- Objects used in EXAMPLE Notifications
+--
+jnxMobileGatewayExampleServerName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The name identifies an external server (charging,AAA,etc) on mobile-gateway."
+    ::= { jnxMobileGatewayExampleNotificationVars 1 }
+
+jnxMobileGatewayExampleServicePicName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "This identifies the session-pic, in the form ms-a/b/0, where
+        <a> is the slot and <b> could be either 0 or 1."
+    ::= { jnxMobileGatewayExampleNotificationVars 2 }
+
+jnxMobileGatewayExampleServerState OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "This indicates whether the server status is Up or Down"
+    ::= { jnxMobileGatewayExampleNotificationVars 3 }
+
+--
+-- EXAMPLE MIB Notifications
+--
+
+jnxMobileGatewayExampleServerStatus NOTIFICATION-TYPE
+    OBJECTS     { jnxMobileGatewayExampleServerName, jnxMobileGatewayExampleServicePicName, jnxMobileGatewayExampleServerState }
+    STATUS      current
+    DESCRIPTION
+        "This notification signifies that the specified server has 
+        changed state. The ServerName identifies the server, the 
+        ServicePicName identifies the session-pic that originated this
+        notification and ServerState indicates whether server came up or went down." 
+    ::= { jnxMobileGatewayExampleNotifications 1 }
+
+-- End of JUNIPER Mobile Gateway EXAMPLE MIB
+
+END