WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

395
mibs/infinera/INFINERA-TP-OTUKICTP-MIB Normal file
View File

@ -0,0 +1,395 @@
-- *****************************************************************
-- INFINERA-TP-OTUKICLIENTCTP-MIB
-- Copyright (c) 2011-2012 by Infinera Inc.
-- All rights reserved.
-- ****************************************************************
INFINERA-TP-OTUKICTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter64 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
DisplayString, TruthValue FROM SNMPv2-TC
ifIndex FROM IF-MIB
InfnServiceType,InfnEqptType,InfnArc,
InfnEnableDisable,InfnMonitoringMode,
InfnSMQ,InfnServiceMode,
FloatTenths,InfnOtuBitRateK FROM INFINERA-TC-MIB
terminationPoint FROM INFINERA-REG-MIB;
otukiCtpMIB MODULE-IDENTITY
LAST-UPDATED "200904200000Z"
ORGANIZATION "Infinera"
CONTACT-INFO
"Infinera
1322 Bordeaux Drive
Sunnyvale, CA - 94089
Contact : Technical Support
Email : support@infinera.com
Phone : 1-877-INF-5288"
DESCRIPTION
" "
REVISION "200904200000Z"
DESCRIPTION
"First Version"
::= { terminationPoint 31 }
otukiCtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF OtuKiCtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of OtuKiClientCtp entries. Each entry is uniquely identified by the value of ifIndex."
::= { otukiCtpMIB 1 }
otukiCtpEntry OBJECT-TYPE
SYNTAX OtuKiCtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A OtuKiClientCtp entry containing information pertaining to Infinera OtuKiClientCtp interfaces.
Entries will exist in this table for interfaces of type otuKiclientCtp."
INDEX { ifIndex }
::= { otukiCtpTable 1 }
OtuKiCtpEntry ::= SEQUENCE {
otukiCtpServiceMode InfnServiceMode,
otukiCtpServiceModeQualifier InfnSMQ,
otukiCtpFecCorrection InfnEnableDisable,
otukiCtpFecEnabled InfnEnableDisable,
otukiFecDecoderIterationCount Integer32,
otukpropagationDelay FloatTenths,
otukiBitRateK InfnOtuBitRateK,
otukiCtpFacTxTTI DisplayString,
otukiCtpFacExpectedSAPI DisplayString,
otukiCtpFacExpectedDAPI DisplayString,
otukiCtpFacRxTTI DisplayString,
otukiCtpFacPmHistStatsEnable InfnEnableDisable,
otukiCtpFacMonitoringMode InfnMonitoringMode,
otukiCtpFacDSThreshold Integer32,
otukiCtpFacSDThreshold Integer32 ,
otukiCtpFacTimDetMode INTEGER,
otukiCtpSupportingOchList DisplayString,
otukiCtpRxEb15MinutesTce Integer32,
otukiCtpRxEbDayTce Integer32,
otukiCtpRxDs15MinutesTce Integer32,
otukiCtpRxDsDayTce Integer32,
otukiCtpRxEbDayTceReporting TruthValue,
otukiCtpRxEb15MinutesTceReporting TruthValue,
otukiCtpRxDsDayTceReporting TruthValue,
otukiCtpRxDs15MinutesTceReporting TruthValue,
otukiCtpAlarmReportControl InfnArc,
otukiCtpConfiguredServiceType InfnServiceType
}
otukiCtpServiceMode OBJECT-TYPE
SYNTAX InfnServiceMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "'None<6E> is the default value indicated for the OTU client CTP when it is initially created.
OTUk alarms, loopbacks/diagnostics, PMs, etc. are intended to be supported in alignment with pre-R6 support for
similar SONET/SDH CTPs. See also Fac/TermMonitoringMode"
DEFVAL { none }
::= { otukiCtpEntry 1 }
otukiCtpServiceModeQualifier OBJECT-TYPE
SYNTAX InfnSMQ
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Service Mode Qualifier (SMQ) of the ODU client CTP (i.e., the mode/type of service in which
this ODU client CTP is being used,). None<6E> is the default value indicated for the OTU client CTP when it is initially created.
Value is set as a result of service provisioning (see Xcon and SNC provisioning). Allowed value is dependent on the Configured Service Type and
the Service Mode (which are also the result of service provisioning)"
DEFVAL { none }
::= { otukiCtpEntry 2 }
otukiCtpFecCorrection OBJECT-TYPE
SYNTAX InfnEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This atTermute is used to enable or disable the FEC correction at the ingress of the OTU client facility.
When Disabled, the FEC statistics are still provided. Applicable to:All OtuKiClientCtp."
DEFVAL { enabled }
::= { otukiCtpEntry 3 }
otukiCtpFecEnabled OBJECT-TYPE
SYNTAX InfnEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This atTermute is used to enable or disable the G.709 Fec Generation
and handling on the OTU Term interface. If the FECEnabled is FALSE, all zeroes are inserted on the FEC overhead signal.
Similarly, a OTU Term interfaces receiving the Zero FEC signal, will not be able to detect or correct errors"
DEFVAL { enabled }
::= { otukiCtpEntry 4 }
otukiFecDecoderIterationCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
DEFVAL { 3 }
::= { otukiCtpEntry 5 }
otukpropagationDelay OBJECT-TYPE
SYNTAX FloatTenths
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { otukiCtpEntry 6 }
otukiBitRateK OBJECT-TYPE
SYNTAX InfnOtuBitRateK
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { otukiCtpEntry 7 }
otukiCtpFacTxTTI OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction)."
::= { otukiCtpEntry 8 }
otukiCtpFacExpectedSAPI OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction). "
::= { otukiCtpEntry 9 }
otukiCtpFacExpectedDAPI OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Destination Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction) "
::= { otukiCtpEntry 10 }
otukiCtpFacRxTTI OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction)."
::= { otukiCtpEntry 11 }
otukiCtpFacPmHistStatsEnable OBJECT-TYPE
SYNTAX InfnEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Flag to enable or disable the collection of PMs on the Terminal side of OTU Clients."
DEFVAL { enabled }
::= { otukiCtpEntry 12 }
otukiCtpFacMonitoringMode OBJECT-TYPE
SYNTAX InfnMonitoringMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side)."
::= { otukiCtpEntry 13 }
otukiCtpFacDSThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This attribute indicates the Facility-side (e.g., Trib-side) threshold level for declaring a
performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks
in that second is greater than or equal to the specified threshold level.
This attribute maps to the DEGThr MIB of RFC-3591"
DEFVAL { 30 }
::= { otukiCtpEntry 14 }
otukiCtpFacSDThreshold OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This attribute indicates the Facility-side (e.g.,Trib-side) threshold level for declaring a
Degraded Signal defect. A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are
detected. This attribute maps to the DEGM MIB of RFC-3591"
DEFVAL { 7 }
::= { otukiCtpEntry 15 }
otukiCtpFacTimDetMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
sapi(2),
dapi(3),
sapidapi(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This atTermute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected
and Received TTI message. The following are the values and their meaning:
OFF: TIM-S is not reported.
DAPI: TIM-S is reported only if the DAPI message mismatch occurs.
SAPI: TIM-S is reported only if the SAPI message mismatch occurs.
DAPI_SAPI: Either the DAPI or the SAPI messages are in a mismatch state. "
DEFVAL { off }
::= { otukiCtpEntry 16 }
otukiCtpSupportingOchList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Supporting OCH List that is this client is using. "
::= { otukiCtpEntry 17 }
otukiCtpRxEb15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of ErrorBlock in receive direction during 15 minutes interval."
DEFVAL { 1500 }
::= { otukiCtpEntry 18 }
otukiCtpRxEbDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of ErrorBlock in receive direction during 24 hours interval."
DEFVAL { 15000 }
::= { otukiCtpEntry 19}
otukiCtpRxDs15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of Defect Seconds in receive direction during 15 minutes interval."
DEFVAL { 120 }
::= { otukiCtpEntry 20 }
otukiCtpRxDsDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of Defect Seconds in receive direction during 24 hours interval."
DEFVAL { 1200 }
::= { otukiCtpEntry 21 }
otukiCtpRxEbDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Flag that enables/disables the reporting of RxEbDayTce threshold crossing."
DEFVAL { false }
::= { otukiCtpEntry 22 }
otukiCtpRxEb15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing."
DEFVAL { false }
::= { otukiCtpEntry 23 }
otukiCtpRxDsDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Flag that enables/disables the reporting of RxDsDayTce threshold crossing."
DEFVAL { false }
::= { otukiCtpEntry 24 }
otukiCtpRxDs15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing."
DEFVAL { false }
::= { otukiCtpEntry 25 }
otukiCtpAlarmReportControl OBJECT-TYPE
SYNTAX InfnArc
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The Alarm Reporting Control Flag for the OTU Clients. ."
DEFVAL { allowed }
::= { otukiCtpEntry 26 }
otukiCtpConfiguredServiceType OBJECT-TYPE
SYNTAX InfnServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { otukiCtpEntry 27 }
-- Conformance Statements
otukiCtpConformance OBJECT IDENTIFIER ::= { otukiCtpMIB 3 }
otukiCtpCompliances OBJECT IDENTIFIER ::= { otukiCtpConformance 1 }
otukiCtpGroups OBJECT IDENTIFIER ::= { otukiCtpConformance 2 }
otukiCtpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the OTUKICLIENTCTP-MIB"
MODULE
MANDATORY-GROUPS { otukiCtpGroup }
::= { otukiCtpCompliances 1 }
otukiCtpGroup OBJECT-GROUP
OBJECTS {
otukiCtpServiceMode,
otukiCtpServiceModeQualifier,
otukiCtpFecCorrection,
otukiCtpFecEnabled ,
otukiFecDecoderIterationCount,
otukpropagationDelay,
otukiBitRateK,
otukiCtpFacTxTTI,
otukiCtpFacExpectedSAPI,
otukiCtpFacExpectedDAPI ,
otukiCtpFacRxTTI,
otukiCtpFacPmHistStatsEnable,
otukiCtpFacMonitoringMode ,
otukiCtpFacDSThreshold,
otukiCtpFacSDThreshold ,
otukiCtpFacTimDetMode,
otukiCtpSupportingOchList,
otukiCtpRxEb15MinutesTce ,
otukiCtpRxEbDayTce ,
otukiCtpRxDs15MinutesTce,
otukiCtpRxDsDayTce ,
otukiCtpRxEbDayTceReporting,
otukiCtpRxEb15MinutesTceReporting ,
otukiCtpRxDsDayTceReporting,
otukiCtpRxDs15MinutesTceReporting,
otukiCtpAlarmReportControl,
otukiCtpConfiguredServiceType
}
STATUS current
DESCRIPTION
" A collection of objects for managing the otukiCtp"
::= { otukiCtpGroups 1 }
END