initial commit; version 22.5.12042

2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
--- a/mibs/infinera/INFINERA-TP-CMMOCGPTP-MIB
+++ b/mibs/infinera/INFINERA-TP-CMMOCGPTP-MIB
@ -0,0 +1,163 @@
+-- *****************************************************************
+-- INFINERA-TP-CMMOCGPTP-MIB
+-- Copyright (c) 2008-2012 by Infinera Inc.
+-- All rights reserved.
+-- ****************************************************************
+
+INFINERA-TP-CMMOCGPTP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE                FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP             FROM SNMPv2-CONF
+    DisplayString, TruthValue                   FROM SNMPv2-TC
+    ifIndex                                     FROM IF-MIB
+    terminationPoint                            FROM INFINERA-REG-MIB;
+
+
+cmmOcgPtpMIB MODULE-IDENTITY
+    LAST-UPDATED  "200810200000Z"
+    ORGANIZATION  "Infinera"
+    CONTACT-INFO
+        "Infinera
+        1322 Bordeaux Drive
+        Sunnyvale, CA - 94089
+
+        Contact : Technical Support
+        Email   : support@infinera.com
+        Phone   : 1-877-INF-5288"
+    DESCRIPTION
+        " "
+    REVISION  "200810200000Z"
+    DESCRIPTION
+        "First Version"
+    ::= { terminationPoint 28 }
+
+cmmOcgPtpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CmmOcgPtpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of CmmOcgPtp entries. Each entry is uniquely identified by the value of ifIndex."
+    ::= { cmmOcgPtpMIB 1 } 
+
+cmmOcgPtpEntry  OBJECT-TYPE
+    SYNTAX      CmmOcgPtpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A CmmOcgPtp entry containing information pertaining to Infinera CmmOcgPtp Interfaces.
+        This table is a subclass of IfCommon. Entries will exist in this table only for
+        interfaces of type DLM OCG PTP."
+    INDEX { ifIndex }
+    ::= { cmmOcgPtpTable 1 }
+
+
+CmmOcgPtpEntry  ::= SEQUENCE {
+    cmmOcgPtpDiscoveredRemoteTP      DisplayString,
+    cmmOcgPtpAutoDiscoveryState      INTEGER,
+    cmmOcgPtpPmHistStatsEnable       INTEGER,
+    cmmOcgPtpOperatingMode           INTEGER,
+    cmmOcgPtpOcgPowerControlLoop     INTEGER,
+    cmmOcgPtpProvisionedOcgNumber    Integer32   
+}
+
+cmmOcgPtpDiscoveredRemoteTP OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This refers to the name of the BMM OCG PTP to which this fiber is connected."
+    ::= { cmmOcgPtpEntry  1 }
+
+
+cmmOcgPtpAutoDiscoveryState OBJECT-TYPE
+    SYNTAX  INTEGER {
+        inProgress(1),
+        completed(2),
+        unknown(3),
+        notValidOrShutdown(4),
+        failed(5)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "State of the auto discovery. Completed indicates that the exchange of ID with corresponding
+        BMM was successful. It does not tell whether there is a mismatch or not."
+    DEFVAL      { notValidOrShutdown }
+    ::= { cmmOcgPtpEntry  2 }
+
+
+cmmOcgPtpPmHistStatsEnable OBJECT-TYPE
+    SYNTAX  INTEGER {
+        enabled(1),
+        disabled(2)
+    }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION "Flag to enable or disable PM collection."
+    DEFVAL      { enabled }
+    ::= { cmmOcgPtpEntry  3 }
+
+cmmOcgPtpOperatingMode  OBJECT-TYPE
+    SYNTAX     INTEGER {
+        gen1 (1),
+        gen2 (2)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION 
+        "This objects controls the operating mode for  CMMOCG in Gen1 and Gen2 modes."
+    DEFVAL  { gen2 }
+    ::= { cmmOcgPtpEntry 4 }
+
+    
+cmmOcgPtpOcgPowerControlLoop OBJECT-TYPE
+    SYNTAX  INTEGER {
+        disabled(1),
+        enabled(2)
+    }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION "Parameter that indicates whether OCG Control Loop is enabled or disabled."
+    DEFVAL      { enabled }
+    ::= { cmmOcgPtpEntry  5 }
+
+    
+cmmOcgPtpProvisionedOcgNumber OBJECT-TYPE
+    SYNTAX      Integer32 (1..16)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The OCG number that this BMM OCG TP is associated to. This maps 1-to-1 with the DLM/XLM type.
+        Auto-discovery processes needs to ensure that the ocgNumber and the DLM/XLM type are
+        compatible before turning the DLM on."
+    ::= { cmmOcgPtpEntry  6 }    
+
+-- Conformance Statements
+cmmOcgPtpConformance    OBJECT IDENTIFIER ::= { cmmOcgPtpMIB 3 }
+cmmOcgPtpCompliances    OBJECT IDENTIFIER ::= { cmmOcgPtpConformance 1 }
+cmmOcgPtpGroups         OBJECT IDENTIFIER ::= { cmmOcgPtpConformance 2 }
+
+cmmOcgPtpCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+    "Describes the requirements for conformance to the CMMOCGPTP-MIB"
+    MODULE
+        MANDATORY-GROUPS { cmmOcgPtpGroup }
+    ::= { cmmOcgPtpCompliances 1 }
+
+cmmOcgPtpGroup OBJECT-GROUP
+    OBJECTS {
+        cmmOcgPtpDiscoveredRemoteTP,
+        cmmOcgPtpAutoDiscoveryState,
+        cmmOcgPtpPmHistStatsEnable,
+        cmmOcgPtpOcgPowerControlLoop,
+        cmmOcgPtpProvisionedOcgNumber
+    }
+    STATUS current
+    DESCRIPTION
+        " A collection of objects for managing the cmmOcgPtp"
+    ::= { cmmOcgPtpGroups 1 }
+
+
+END