initial commit; version 22.5.12042

mibs/infinera/INFINERA-PM-FAN-MIB

@@ -0,0 +1,196 @@
+-- *****************************************************************
+-- INFINERA-PM-FAN-MIB
+-- 
+-- February 2015, Kavitha Manjunatha / Narendra Gupta
+-- 
+-- 
+-- Copyright (c) 2008-2012 by Infinera Inc.
+-- All rights reserved.
+-- ****************************************************************
+
+INFINERA-PM-FAN-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32                                   FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP             FROM SNMPv2-CONF
+    TruthValue                                  FROM SNMPv2-TC
+    ifIndex                                     FROM IF-MIB
+    FloatTenths                                 FROM INFINERA-TC-MIB
+    commonPerfMon                               FROM INFINERA-REG-MIB;
+
+
+fanPmMIB MODULE-IDENTITY
+    LAST-UPDATED  "201502060000Z"
+    ORGANIZATION  "Infinera"
+    CONTACT-INFO
+        "Infinera
+        1322 Bordeaux Drive
+        Sunnyvale, CA - 94089
+
+        Contact : Technical Support
+        Email   : support@infinera.com
+        Phone   : 1-877-INF-5288"
+    DESCRIPTION
+        " "
+    REVISION      "201502060000Z" 
+    DESCRIPTION
+        "First Version"
+    ::= { commonPerfMon 4 }
+
+-- Real PMs
+fanPmRealTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF FanPmRealEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of FanPmReal entries. Each entry is uniquely identified by the value of ifIndex."
+    ::= { fanPmMIB 1 } 
+
+fanPmRealEntry  OBJECT-TYPE
+    SYNTAX      FanPmRealEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A fanPm entry containing real-time performance information pertaining to
+        Infinera Fan interfaces. . This table is a subclass of IfCommon.
+        Entries will exist in this table only for interfaces of fan."
+    INDEX { ifIndex }
+    ::= { fanPmRealTable 1 }
+
+
+FanPmRealEntry  ::= SEQUENCE {
+    fanPmRealInRpmRaw          FloatTenths
+}
+
+fanPmRealInRpmRaw OBJECT-TYPE
+    SYNTAX      FloatTenths
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "TOM Transmitted Laser Bias Current"
+    ::= { fanPmRealEntry  1 }
+
+-- Historical PMs
+fanPmTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF FanPmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of FanPm entries. Each entry is uniquely identified by the value of ifIndex, sampleDuration and fanPmTimestamp."
+    ::= { fanPmMIB 2 } 
+
+fanPmEntry  OBJECT-TYPE
+    SYNTAX      FanPmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A Fan entry containing historical performance information pertaining to
+        Infinera Fan interfaces. . This table is a subclass of IfCommon.
+        Entries will exist in this table only for interfaces of type Fan.
+        Each interface may have a number of entries in this table, each with a different combination
+        of timestamp and sample duration."
+    INDEX { ifIndex, fanPmSampleDuration, fanPmTimestamp }
+    ::= { fanPmTable 1 }
+
+FanPmEntry  ::= SEQUENCE {
+    fanPmTimestamp            Integer32,
+    fanPmSampleDuration       INTEGER,
+    fanPmValidity             TruthValue,
+    fanPmInRpmMin             FloatTenths,
+    fanPmInRpmMax             FloatTenths,
+    fanPmInRpmAvg             FloatTenths
+}
+
+fanPmTimestamp OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "End Time stamp for this interval. If this time is later than the current time,
+        then the data for this bucket is currently being collected."
+    ::= { fanPmEntry  1 }
+
+fanPmSampleDuration OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    fifteenMinutes(1),
+                    day(2)
+                }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The duration of this sample."
+    ::= { fanPmEntry  2 }
+
+fanPmValidity OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "Flag indicating if data was valid for the entire interval"
+    ::= { fanPmEntry  3 }
+
+fanPmInRpmMin OBJECT-TYPE
+    SYNTAX      FloatTenths
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "InRpmMin historical PMs"
+    ::= { fanPmEntry  4 }
+
+fanPmInRpmMax OBJECT-TYPE
+    SYNTAX      FloatTenths
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "InRpmMax historical PMs"
+    ::= { fanPmEntry  5 }
+
+fanPmInRpmAvg OBJECT-TYPE
+    SYNTAX      FloatTenths
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "InRpmAvg historical PMs"
+    ::= { fanPmEntry  6 }
+
+-- Conformance Statements
+fanPmConformance    OBJECT IDENTIFIER ::= { fanPmMIB 3 }
+fanPmCompliances    OBJECT IDENTIFIER ::= { fanPmConformance 1 }
+fanPmGroups         OBJECT IDENTIFIER ::= { fanPmConformance 2 }
+
+fanPmCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+    "Describes the requirements for conformance to the PM-FAN-MIB"
+    MODULE
+        MANDATORY-GROUPS { fanPmRealGroup }
+    ::= { fanPmCompliances 1 }
+
+fanPmRealCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+    "Describes the requirements for conformance to the fanPmReal-MIB"
+    MODULE
+        MANDATORY-GROUPS { fanPmRealGroup }
+    ::= { fanPmCompliances 2 }
+
+-- Historical PM groups
+fanPmGroup OBJECT-GROUP
+    OBJECTS {
+	    fanPmValidity,         
+    	fanPmInRpmMin,
+    	fanPmInRpmMax,
+    	fanPmInRpmAvg 
+    }
+    STATUS current          
+    DESCRIPTION             
+        " A collection of objects for reading the performance of the Fan."
+    ::= { fanPmGroups 1 }
+
+-- Real PM groups
+fanPmRealGroup OBJECT-GROUP
+    OBJECTS {
+    	fanPmRealInRpmRaw 
+    }
+    STATUS current
+    DESCRIPTION
+        " A collection of objects for reading the performance of the fan."
+    ::= { fanPmGroups 2 }
+
+END