WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

548
mibs/hp/HpicfHighAvailability-MIB Normal file
View File

@ -0,0 +1,548 @@
HpicfHighAvailability-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Counter32, Unsigned32,Integer32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
entPhysicalIndex,PhysicalIndex
FROM ENTITY-MIB
EntityStandbyStatus
FROM ENTITY-STATE-MIB
hpicfCommon
FROM HP-ICF-OID;
hpicfHighAvailability MODULE-IDENTITY
LAST-UPDATED "201701050000Z" -- Jan 05 , 2017
ORGANIZATION "HP Networking"
CONTACT-INFO "Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "Management information for configuring Redundant
Management module on Hewlett-Packard network devices."
REVISION "201701050000Z" -- Jan 05 , 2017
DESCRIPTION "Added hpicfHAPreferredActiveManagement to hpicfHAConfigObjects.
And added hpicfHAConfigGroup1 and deprecated
hpicfHAConfigGroup and hpicfHACompliance"
REVISION "201205150000Z" -- May 15 , 2012
DESCRIPTION "Added hpicfHAMgmtModuleBackUpState to the table
hpicfHAMgmtModuleTable.Added hpicfHAMgmtModuleGroup,
hpicfHACompliance2 and deprecated hpicfHAMgmtModuleGroup
and hpicfHACompliance1."
REVISION "200910180000Z" -- October 18, 2009
DESCRIPTION "Added hpicfHAFailOverLogTable and
hpicfHAMgmtModuleTable."
REVISION "200909060000Z" -- September 6, 2009
DESCRIPTION "Added hpicfHAContinuousFwdingTime and Removed
hpicfHARedundancyWarmStandby scalar mib and
added it as enum to hpicfHARedundancyManagementModuleMode."
REVISION "200908210000Z" -- August 21,2009
DESCRIPTION "Added hpicfHARedundancyWarmStandby scalar mib."
REVISION "200609050000Z" -- September 5, 2006
DESCRIPTION "Initial version of the MIB module."
::= { hpicfCommon 11 }
-- **********************************************************************
-- The HP ICF High Availability MIB groups
-- **********************************************************************
hpicfHAConfigObjects OBJECT IDENTIFIER ::= { hpicfHighAvailability 1}
hpicfHAStatusObjects OBJECT IDENTIFIER ::= { hpicfHighAvailability 2}
hpicfHAConformance OBJECT IDENTIFIER ::= { hpicfHighAvailability 3}
--The HP ICF High Availability configuration group
hpicfHARedundancyManagementModuleMode OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
warmStandby (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify to enable/disable this feature. Enabling
allows for management module redundancy when there are
two management modules in the switch and does a hitless
failover. Disabling prevents redundancy except due to
fatal hardware errors on one management module.
warmStandby option does a non-hitless failover."
::= { hpicfHAConfigObjects 1 }
hpicfHAContinuousFwdingTime OBJECT-TYPE
SYNTAX Unsigned32 --(0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a configurable timer. After the failover, on the new AMM,
the route and neighbor table entries are marked as stale in the FIB.
As routing protocols begin to re-add routes, this stale flag
will be reset. When this timer expires, all route and neighbor
table entries still marked stale [not yet re-added] will be
removed. A value of 0 means that no layer 3 hitless behavior is desired,
and in this configuration, upon failover all FIB entries are
flushed and corresponding hardware entries are removed.
A default value of 5 minutes is chosen with the assumption
that the routing protocols can finish re-adding the routes to
the equivalent state within this time."
DEFVAL { 300 }
::= { hpicfHAConfigObjects 2 }
hpicfHAPreferredActiveManagement OBJECT-TYPE
SYNTAX INTEGER {
none (0),
management-module1 (1),
management-module2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify management module priority to specify
Active management module across several reboot.
The module is likely to become Active post reboot and
Not instantaneously. The setting is applied to the
running-configuration"
DEFVAL { 0 }
::= { hpicfHAConfigObjects 3 }
-- The HP ICF High Availability status group
hpicfHAMgmtRedundancyFailureReason OBJECT-TYPE
SYNTAX INTEGER {
noRedundantModule (1),
noFailure (2),
unknownReason (3),
mismatchOS (4),
failedSelftest (5),
communicationFailure (6),
redundancyDisable (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the reason a redundant management module failed to
become a standby module."
::= { hpicfHAStatusObjects 1 }
hpicfHAMgmtFailovers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the number of management module failovers since
last chassis boot."
::= { hpicfHAStatusObjects 2 }
hpicfHALastFailoverTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the time (in hundredths of a second) of the
last management module failover."
::= {hpicfHAStatusObjects 3 }
hpicfHAFailOverLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfHAFailOverLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains High Availability(HA)
failover log specific information."
::= { hpicfHAStatusObjects 4}
hpicfHAFailOverLogEntry OBJECT-TYPE
SYNTAX HpicfHAFailOverLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Failover log information maintained
for HA."
INDEX { hpicfHAFailOverIndex
}
::= { hpicfHAFailOverLogTable 1 }
HpicfHAFailOverLogEntry ::=
SEQUENCE {
hpicfHAFailOverIndex Integer32,
hpicfHAFailOverMgmtModule PhysicalIndex,
hpicfHAFailOverState INTEGER,
hpicfHAFailOverTime Integer32,
hpicfHAFailOverReason INTEGER
}
hpicfHAFailOverIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the
entries in the failover log table.
This table contains maximum of recent 10 entries."
::= { hpicfHAFailOverLogEntry 1 }
hpicfHAFailOverMgmtModule OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the management
module information.It is similar to
entPhysicalIndex."
::= { hpicfHAFailOverLogEntry 2 }
hpicfHAFailOverState OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
active (2),
standby (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the failover
state.
'unknown' indicates the state of the management
module is undefined and this resource is unable to
report standby state.
'active' indicates the state of the management
module as active module and it means the
resource is providing service.
'standby' indicates that the management
module is not providing service, but it
will be immediately able to take over the role of
the resource to be backed up, without the need for
initialization activity, and will contain the same
information as the resource to be backed up."
::= { hpicfHAFailOverLogEntry 3 }
hpicfHAFailOverTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the failover
time in seconds since 1/1/1990 0:0:0."
::= { hpicfHAFailOverLogEntry 4 }
hpicfHAFailOverReason OBJECT-TYPE
SYNTAX INTEGER {
invalid (0),
switchoverReq (1),
buttonReq (2),
crashReq(3),
activeReset(4),
altReset (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object define the reason
for failover.
'switchoverReq' indicates failover as a
result of switchover command issued by the
user.
'buttonReq' indicates failover as a result
of manual boot done by the user via reboot
button.
'crashReq' indicates failover as a result
of crash that happened to the active module.
'activeReset' indicates failover as a result
of reset command issued by the user at
active module.
'altReset' indicates failover as a result
of reset command issued by the user at
the alternate module. "
::= { hpicfHAFailOverLogEntry 5 }
hpicfHAMgmtModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfHAMgmtModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains High Availability
(HA) management module specific information."
::= { hpicfHAStatusObjects 5}
hpicfHAMgmtModuleEntry OBJECT-TYPE
SYNTAX HpicfHAMgmtModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management module information maintained
for HA."
INDEX { entPhysicalIndex
}
::= { hpicfHAMgmtModuleTable 1 }
HpicfHAMgmtModuleEntry ::=
SEQUENCE {
hpicfHAMgmtModuleState EntityStandbyStatus,
hpicfHAMgmtModuleCardUpSince Integer32,
hpicfHAMgmtModuleStateSince Integer32,
hpicfHAMgmtModuleRedundancyState INTEGER,
hpicfHAMgmtModuleBackUpState INTEGER
}
hpicfHAMgmtModuleState OBJECT-TYPE
SYNTAX EntityStandbyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the state of the
the management module.This object is
similar to entStateStandby object."
::= { hpicfHAMgmtModuleEntry 1 }
hpicfHAMgmtModuleCardUpSince OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the card
uptime in seconds since
this module state. "
::= { hpicfHAMgmtModuleEntry 2 }
hpicfHAMgmtModuleStateSince OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays time in
seconds from which the current
state is valid."
::= { hpicfHAMgmtModuleEntry 3}
hpicfHAMgmtModuleRedundancyState OBJECT-TYPE
SYNTAX INTEGER {
unavailable (1),
active (2),
disabled (3),
syncing (4),
warmStandby (5),
hitless (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the management
module's redundancy state.
'unavailable' indicates the redundancy module
is not available due to error or absence of
the module.
'active' indicates the redundancy module is
currently active and is providing service.
'disabled' indicates the redundancy module is
disabled.
'syncing' indicates the redundancy module is
in syncing state and after successful syncing
it will enter active state else it will report
error.
'warmStandby' indicates the redundancy module is
in warmstandby mode and is not providing service,
but it will be immediately able to take over the role
of the resource to be backed up, without the need for
initialization activity, and will contain the same
information as the resource to be backed up but the
Layer2 information will not be synced.
'hitless'indicates the redundancy module is
in hitless mode and is not providing service,
but it will be immediately able to take over the
role of the resource to be backed up, without the
need for initialization activity, and will contain
the same information as the resource to be backed up."
::= { hpicfHAMgmtModuleEntry 4 }
hpicfHAMgmtModuleBackUpState OBJECT-TYPE
SYNTAX INTEGER {
failed (0),
unknown (1),
waiting (2),
realtimeBackupToSlot (3),
slotIsAbsent (4),
batchBackup (5),
receivingRealtimeData (6),
offline (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the management module's backup state.
'failed' indicates that the redundancy module has failed due
to some communication failure or incompatible OS.
'unknown' indicates that the redundancy module is shutdown.
'waiting' indicates that the redundancy module is waiting
for batch backup request.
'realtimeBackuptoSlot' indicates that the redundancy module
is currently in active state and is providing service.
'slotIsAbsent' indicates that there is no redundant module
due to error or absence of the redundancy module.
'batchBackup' indicates that the redundancy module is in syncing
state and it enters the active state after successful syncing.
'receivingRealtimeData' indicates that the redundancy module is
in standby state.'offline' indicates that the redundancy module
is disabled."
::= { hpicfHAMgmtModuleEntry 5 }
-- ***********************************************************
--
-- hpicfHighAvailability M I B C O N F O R M A N C E
--
-- ***********************************************************
--
hpicfHACompliances OBJECT IDENTIFIER ::= { hpicfHAConformance 1 }
hpicfHAGroups OBJECT IDENTIFIER ::= { hpicfHAConformance 2 }
-- compliance statements
hpicfHACompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"*********** THIS COMPLIANCE IS DEPRECATED ************
The compliance statement for SNMP entities which implement
the hpicfHighAvailability MIB.
This compliance section has been deprecated and replaced
with hpicfHACompliance3"
MODULE -- this module
MANDATORY-GROUPS {
hpicfHAConfigGroup,
hpicfHAStatusGroup
}
::= { hpicfHACompliances 1 }
hpicfHACompliance1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"*********** THIS COMPLIANCE IS DEPRECATED ************
The compliance statement for SNMP entities which implement
the hpicfHighAvailability MIB.
This compliance section has been deprecated and
replaced with hpicfHACompliance2 ."
MODULE -- this module
MANDATORY-GROUPS {
hpicfHAFailOverGroup ,
hpicfHAMgmtModuleGroup
}
::= { hpicfHACompliances 2 }
hpicfHACompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
the hpicfHighAvailability MIB."
MODULE -- this module
MANDATORY-GROUPS {
hpicfHAFailOverGroup ,
hpicfHAMgmtModuleGroup1
}
::= { hpicfHACompliances 3 }
hpicfHACompliance3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
the hpicfHighAvailability MIB."
MODULE -- this module
MANDATORY-GROUPS {
hpicfHAConfigGroup1,
hpicfHAStatusGroup
}
::= { hpicfHACompliances 4 }
-- MIB groupings
hpicfHAConfigGroup OBJECT-GROUP
OBJECTS {
hpicfHARedundancyManagementModuleMode,
hpicfHAContinuousFwdingTime
}
STATUS deprecated
DESCRIPTION
"********** THIS GROUP IS DEPRECATED ***************
The collection of objects which are used to configure the
Redundancy Management Module.
This group has been deprecated and replaced with
hpicfHAConfigGroup1 ."
::= { hpicfHAGroups 1 }
hpicfHAStatusGroup OBJECT-GROUP
OBJECTS {
hpicfHAMgmtRedundancyFailureReason,
hpicfHAMgmtFailovers,
hpicfHALastFailoverTime
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
Management Module statistics information."
::= { hpicfHAGroups 2 }
hpicfHAFailOverGroup OBJECT-GROUP
OBJECTS {
hpicfHAFailOverMgmtModule ,
hpicfHAFailOverState ,
hpicfHAFailOverTime ,
hpicfHAFailOverReason
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
failover log statistics information."
::= { hpicfHAGroups 3 }
hpicfHAMgmtModuleGroup OBJECT-GROUP
OBJECTS {
hpicfHAMgmtModuleState ,
hpicfHAMgmtModuleCardUpSince ,
hpicfHAMgmtModuleStateSince ,
hpicfHAMgmtModuleRedundancyState
}
STATUS deprecated
DESCRIPTION
"********** THIS GROUP IS DEPRECATED ***************
The collection of objects which are used to represent
management module specific information.
This group has been deprecated and replaced with
hpicfHAMgmtModuleGroup1 ."
::= { hpicfHAGroups 4 }
hpicfHAMgmtModuleGroup1 OBJECT-GROUP
OBJECTS {
hpicfHAMgmtModuleState,
hpicfHAMgmtModuleCardUpSince,
hpicfHAMgmtModuleStateSince,
hpicfHAMgmtModuleRedundancyState,
hpicfHAMgmtModuleBackUpState
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
management module specific information."
::= { hpicfHAGroups 5 }
hpicfHAConfigGroup1 OBJECT-GROUP
OBJECTS {
hpicfHARedundancyManagementModuleMode,
hpicfHAContinuousFwdingTime,
hpicfHAPreferredActiveManagement
}
STATUS current
DESCRIPTION
"The collection of objects which are used to configure the
Redundancy Management Module."
::= { hpicfHAGroups 6 }
END