WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

583
mibs/fscom/FS-URPF-MIB Normal file
View File

@ -0,0 +1,583 @@
-- ******************************************************************
-- FS-URPF-MIB.mib
--
-- This module is used for monitoring the state of Unicast Reverse
-- Path Forwarding (URPF) checking.
--
-- April 2009, huangcb
--
-- Copyright (c) 2009 by FS.COM Inc..
-- All rights reserved.
-- ******************************************************************
--
FS-URPF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Gauge32,
Integer32,
Counter32,
Unsigned32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ifIndex
FROM IF-MIB
fsMgmt
FROM FS-SMI;
fsUrpfMIB MODULE-IDENTITY
LAST-UPDATED "200904090000z"
ORGANIZATION "FS.COM Inc.."
CONTACT-INFO
"
Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html"
DESCRIPTION
"Unicast Reverse Path Forwarding (URPF) is a function
that checks the validity of the source address of IP
packets received on an interface. This in an attempt
to prevent Denial of Service attacks based on IP address
spoofing.
URPF checks validity of a source address by determining
whether the packet would be successfully routed as a
destination address.
Based on configuration, the check made can be for existence
of any route for the address, or more strictly for a route
out the interface on which the packet was received by the
device. When a violating packet is detected, it can be dropped.
This MIB allows detection of spoofing events."
REVISION "200904090000z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 46 }
--
-- URPF MIB
--
fsUrpfMIBObjects OBJECT IDENTIFIER ::= { fsUrpfMIB 0 }
fsUrpfMIBNotifs OBJECT IDENTIFIER ::= { fsUrpfMIB 1 }
fsUrpfMIBConformance OBJECT IDENTIFIER ::= { fsUrpfMIB 2 }
--
-- URPF MIB Objects
--
fsUrpfScalar OBJECT IDENTIFIER ::= { fsUrpfMIBObjects 1 }
fsUrpfStatistics OBJECT IDENTIFIER ::= { fsUrpfMIBObjects 2 }
fsUrpfInterfaceConfig OBJECT IDENTIFIER ::= { fsUrpfMIBObjects 3 }
--
-- fsUrpfScalar
--
fsUrpfComputeInterval OBJECT-TYPE
SYNTAX Integer32 (30..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time between rate computations. This global value
applies for the computation of all URPF rates, global
and per-interface.
When the value of fsUrpfComputeInterval is changed,
the interval in-progress proceeds as though the value
had not changed. The change will apply to the length
of subsequent intervals.
The fsUrpfComputeInterval must be less than or equal
to the fsUrpfDropRateWindow.
Relation CLI: ip verify urpf drop-rate compute interval seconds."
DEFVAL { 30 }
::= { fsUrpfScalar 1 }
fsUrpfDropRateWindow OBJECT-TYPE
SYNTAX Integer32 (150..1500)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The window of time in the recent past over which the drop
count used in the drop rate computation is collected.
This global value applies for the computation of all URPF
rates, global and per-interface.
Once the period over which computations have been
performed exceeds fsUrpfDropRateWindow, every time a
computation is performed, the window slides up to end
at the current time and start at fsUrpfDropRateWindow
seconds before.
Since the agent must save the drop count values
for each compute interval in order to slide the window,
the number of counts saved is the quotient of
fsUrpfDropRateWindow divided by fsUrpfComputeInterval."
DEFVAL { 150 }
::= { fsUrpfScalar 2 }
fsUrpfDropNotifyHoldDownTime OBJECT-TYPE
SYNTAX Integer32(30..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time between issuance of
fsUrpfIfDropRateNotify notifications for a
particular interface and packet forwarding type.
Notifications are generated for each interface and
packet forwarding type that exceeds the drop-rate.
When a Notify is sent because the drop-rate is
exceeded for a particular interface and forwarding
type, the time specified by this object is used to
specify the minimum time that must elapse before
another Notify can be sent for that interface and
forwarding type. The time is specified globally but
used individually.
Relation CLI: ip verify urpf drop-rate notify hold-down seconds."
DEFVAL { 300 }
::= { fsUrpfScalar 3 }
--
-- fsUrpfStatistics
--
fsUrpfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSUrpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains summary information for the
managed device on URPF dropping."
::= { fsUrpfStatistics 1 }
fsUrpfEntry OBJECT-TYPE
SYNTAX FSUrpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the managed device supports URPF dropping,
a row exists for each IP version type (v4 and v6).
A row contains summary information on URPF
dropping over the entire managed device."
INDEX { fsUrpfIpVersion }
::= { fsUrpfTable 1 }
FSUrpfEntry ::= SEQUENCE {
fsUrpfIpVersion INTEGER,
fsUrpfDrops Counter32,
fsUrpfDropRate Gauge32
}
fsUrpfIpVersion OBJECT-TYPE
SYNTAX INTEGER {ipv4(1), ipv6(2)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the version of IP forwarding on an interface
to which the table row URPF counts, rates, and
configuration apply."
::= { fsUrpfEntry 1 }
fsUrpfDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of dropped IP version fsUrpfIpVersion packets failing
a URPF check. This value is the sum of drops of packets
received on all interfaces of the managed device."
::= { fsUrpfEntry 2 }
fsUrpfDropRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of packet drops of IP version fsUrpfIpVersion
packets due to URPF for the managed device. The
per-interface drop rate notification is issued on rates
exceeding a limit (rising rate). This dropping may
indicate an security attack on the network. To determine
whether the attack/event is over, the NMS must
consult the managed device. This object can be polled to
determine the recent drop rate for the managed device
as a whole, in addition to querying particular interface
objects.
This object is the average rate of dropping over the most
recent window of time. The rate is computed by dividing
the number of packets dropped over a window by the window
time in seconds. The window time is specified by
fsUrpfDropRateWindow. Each time the drop rate is computed,
and at system startup, a snapshot is taken of the latest
value of fsUrpfDrops. Subtracting from this the snapshot
of fsUrpfDrops at the start of the current window of time
gives the number of packets dropped.
The drop rate is
computed every fsUrpfComputeInterval seconds. As an
example, let fsUrpfDropRateWindow be 300 seconds,
and fsUrpfComputeInterval 30 seconds. Every 30 seconds,
the drop count five minutes previous is subtracted
from the current drop count, and the result is divided
by 300 to arrive at the drop rate.
At device start-up, until the device has been up more than
fsUrpfDropRateWindow, when drop rate is computed,
the value of fsUrpfDrops is divided by the time the
device has been up.
After the device has been up for fsUrpfDropRateWindow,
when drop rate is computed, the number of packet drops counted
from interval start time to the computation time is divided
by fsUrpfDropRateWindow.
Changes to fsUrpfDropRateWindow are not reflected in this
object until the next computation time.
The rate from the most recent computation is the value
fetched until the subsequent computation is performed."
::= { fsUrpfEntry 3 }
fsUrpfIfMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSUrpfIfMonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on URPF dropping on
an interface."
::= { fsUrpfStatistics 2 }
fsUrpfIfMonEntry OBJECT-TYPE
SYNTAX FSUrpfIfMonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If IPv4 packet forwarding is configured on an interface,
and is configured to perform URPF checking, a row appears
in this table with indices [ifIndex][ipv4]. If IPv4
packet forwarding is deconfigured, or URPF checking
is deconfigured, the row disappears.
If IPv6 packet forwarding is configured on an interface,
and is configured to perform URPF checking, a row appears
in the table with indices [ifIndex][ipv6]. If IPv6
packet forwarding is deconfigured, or URPF checking
is deconfigured, the row disappears."
INDEX { ifIndex, fsUrpfIfIpVersion }
::= { fsUrpfIfMonTable 1 }
FSUrpfIfMonEntry ::= SEQUENCE {
fsUrpfIfIpVersion INTEGER,
fsUrpfIfDrops Counter32,
fsUrpfIfDropRate Gauge32
}
fsUrpfIfIpVersion OBJECT-TYPE
SYNTAX INTEGER {ipv4(1), ipv6(2)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the version of IP forwarding on an interface
to which the table row URPF counts, rates, and
configuration apply."
::= { fsUrpfIfMonEntry 1}
fsUrpfIfDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP packets of version fsUrpfIfIpVersion
failing the URPF check and dropped by the managed device
on a particular interface."
::= { fsUrpfIfMonEntry 2 }
fsUrpfIfDropRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of packet drops of IP version fsUrpfIfIpVersion
packets due to URPF on the interface.
This object is the average rate of dropping over the most
recent interval of time.The rate is computed by dividing
the number of packets dropped over an interval by the
interval time in seconds. Each time the drop rate
is computed, and at system startup, a snapshot is taken
of the latest value of fsUrpfIfDrops. Subtracting from this
the snapshot of fsUrpfIfDrops at the start of the current
interval of time gives the number of packets dropped.
The drop rate is computed every fsUrpfComputeInterval
seconds.
When drop rate is computed, if time since the creation of
a row in fsUrpfIfMonTable is less than
fsUrpfDropRateWindow, the value of fsUrpfIfDrops is
divided by the time since row was created.
After the row has been in existence for
fsUrpfDropRateWindow, when drop rate is computed, the
number of packet drops counted on the interface from
interval start time to the computation time is divided
by fsUrpfDropRateWindow.
Changes to fsUrpfDropRateWindow are not reflected in this
object until the next computation time.
The rate from the most recent computation is the value
fetched until the subsequent computation is performed."
::= { fsUrpfIfMonEntry 3 }
--
-- fsUrpfInterfaceConfig
--
fsUrpfIfConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSUrpfIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics information on URPF on
an interface."
::= { fsUrpfInterfaceConfig 1 }
fsUrpfIfConfEntry OBJECT-TYPE
SYNTAX FSUrpfIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row exists in this table if a row exists
in fsUrpfIfMonTable."
AUGMENTS { fsUrpfIfMonEntry }
::= { fsUrpfIfConfTable 1 }
FSUrpfIfConfEntry ::= SEQUENCE {
fsUrpfIfCheckStrict INTEGER,
fsUrpfIfDropRateNotifyEnable TruthValue,
fsUrpfIfNotifyDropRateThreshold Unsigned32,
fsUrpfIfNotifyDrHoldDownReset TruthValue,
fsUrpfIfWhichRouteTableID INTEGER,
fsUrpfIfVrfName SnmpAdminString
}
fsUrpfIfCheckStrict OBJECT-TYPE
SYNTAX INTEGER {
none(0),
strict(1),
loose(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface configuration indicating the strictness of
the reachability check performed
on the interface.
- none: not enable urpf check in this interface.
- strict: check that source addr is reachable via
the interface it came in on.
- loose : check that source addr is reachable via
some interface on the device."
::= { fsUrpfIfConfEntry 1 }
fsUrpfIfDropRateNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system produces the
fsUrpfIfDropRateNotify notification as a result of URPF
dropping of version fsUrpfIfIpVersion IP packets on this
interface. A false value prevents such notifications from
being generated by this system.
Relation CLI: ip verify urpf drop-rate notify."
DEFVAL { false }
::= { fsUrpfIfConfEntry 2 }
fsUrpfIfNotifyDropRateThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets/second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the calculated rate of URPF packet drops
(fsUrpfIfDropRate) meets or exceeds the value
specified by this object, a fsUrpfIfDropRateNotify
notification is sent if fsUrpfIfDropRateNotifyEnable
is set to true, and no such notification for the
IP version has been sent for this interface for the
hold-down period.
Note that due to the calculation used for drop rate,
if there are less than n drop events in an n-second
period the notification will not be generated. To allow
for the detection of a small number of drop events, the
value 0 (zero) is used to indicate that if any drop events
occur during the interval, a notification is generated.
Relation CLI: ip verify urpf drop-rate notify hold-down seconds."
DEFVAL { 1000 }
::= { fsUrpfIfConfEntry 3 }
fsUrpfIfNotifyDrHoldDownReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true causes the five-minute
hold-down timer for emitting URPF drop rate
notifications for IP version fsUrpfIfIpVersion on
the interface to be short-circuited. If a notification
is due and would be emitted for the interface if the
five-minutes elapsed, setting this object will cause
the notification to be sent.
This is a trigger, and doesn't hold information. It is
set and an action is performed. Therefore a get for
this object always returns false.
Relation CLI: clear ip urpf interface."
DEFVAL { false }
::= { fsUrpfIfConfEntry 4 }
fsUrpfIfWhichRouteTableID OBJECT-TYPE
SYNTAX INTEGER {
default(1),
vrf(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface configuration indicating the routing table
consulted for the reachability check:
- default: the non-private routing table for of the
managed system.
- vrf : a particular VPN routing table."
::= { fsUrpfIfConfEntry 5 }
fsUrpfIfVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of fsUrpfIfWhichRouteTableID is 'vrf',
the name of the VRF Table. Otherwise a zero-length
string."
::= { fsUrpfIfConfEntry 6 }
--
-- URPF MIB Notifications
--
fsUrpfIfDropRateNotify NOTIFICATION-TYPE
OBJECTS {
fsUrpfIfDropRate
}
STATUS current
DESCRIPTION
"This notification is generated when
fsUrpfIfDropRateNotifyEnable is set to true and
the calculated URPF drop rate (fsUrpfIfDropRate)
exceeds the notification threshold drop rate
(fsUrpfIfNotifyDropRateThreshold). Note the
exceptional value of 0 for threshold allows notification
generation if any drop events occur in an interval.
After generating this notification, another such
notification will not be sent out for a minimum of five
minutes (note the exception to this provided by
fsUrpfIfNotifyDrHoldDownReset).
The object value present in the notification is the
the drop rate that exceeded the threshold."
::= { fsUrpfMIBNotifs 1 }
--
-- URPF MIB Conformance
--
fsUrpfMIBCompliances OBJECT IDENTIFIER ::=
{ fsUrpfMIBConformance 1 }
fsUrpfMIBGroups OBJECT IDENTIFIER ::=
{ fsUrpfMIBConformance 2 }
fsUrpfMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An SNMP entity can implement this module to
provide URPF problem diagnosis information."
MODULE -- this module
MANDATORY-GROUPS { fsUrpfMIBMainObjectGroup,
fsUrpfMIBNotifyGroup }
GROUP fsUrpfMIBVrfObjectGroup
DESCRIPTION
"This group is mandatory for all implementations
that need to index URPF statistics by VRF interfaces."
::= { fsUrpfMIBCompliances 1 }
fsUrpfMIBMainObjectGroup OBJECT-GROUP
OBJECTS {
fsUrpfComputeInterval,
fsUrpfDropRateWindow,
fsUrpfDropNotifyHoldDownTime,
fsUrpfDrops,
fsUrpfDropRate,
fsUrpfIfDrops,
fsUrpfIfDropRate,
fsUrpfIfCheckStrict,
fsUrpfIfDropRateNotifyEnable,
fsUrpfIfNotifyDropRateThreshold,
fsUrpfIfNotifyDrHoldDownReset
}
STATUS current
DESCRIPTION
"The collection of common counter objects, those
needed by other objects, and the common interface
table."
::= { fsUrpfMIBGroups 1 }
fsUrpfMIBVrfObjectGroup OBJECT-GROUP
OBJECTS {
fsUrpfIfWhichRouteTableID,
fsUrpfIfVrfName
}
STATUS current
DESCRIPTION
"The collection of objects needed to index by
VRF."
::= { fsUrpfMIBGroups 2 }
fsUrpfMIBNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { fsUrpfIfDropRateNotify }
STATUS current
DESCRIPTION
"The collection of objects which are used to specify
notifications for URPF."
::= { fsUrpfMIBGroups 3 }
END