initial commit; version 22.5.12042
This commit is contained in:
810
mibs/ethernetdirect/HME621
Normal file
810
mibs/ethernetdirect/HME621
Normal file
@ -0,0 +1,810 @@
|
||||
HME621 DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
internet
|
||||
FROM RFC1155-SMI;
|
||||
|
||||
|
||||
private OBJECT IDENTIFIER ::= { internet 4 }
|
||||
enterprises OBJECT IDENTIFIER ::= { private 1 }
|
||||
ethernetDirect OBJECT IDENTIFIER ::= { enterprises 60000 }
|
||||
generic OBJECT IDENTIFIER ::= { ethernetDirect 301 }
|
||||
l2switch OBJECT IDENTIFIER ::= { generic 1 }
|
||||
HME-621 OBJECT IDENTIFIER ::= { l2switch 43 }
|
||||
|
||||
|
||||
contact MODULE-IDENTITY
|
||||
LAST-UPDATED "0710220000Z"
|
||||
ORGANIZATION "Ethernet Dirct , Inc."
|
||||
CONTACT-INFO
|
||||
"Ethernet Dirct Corporation.
|
||||
|
||||
19F, No.345, Chung Ho St.,Yung Ho City
|
||||
, 114, Taipei, Taiwan, R.O.C
|
||||
|
||||
Phone: +886-2-29235918 "
|
||||
|
||||
DESCRIPTION
|
||||
" hme621 private MIB file rev 1.02"
|
||||
::= { HME-621 0 }
|
||||
|
||||
|
||||
switchInfo OBJECT IDENTIFIER ::= { HME-621 1 }
|
||||
switchPortMgt OBJECT IDENTIFIER ::= { HME-621 2 }
|
||||
systemSTAMgt OBJECT IDENTIFIER ::= { HME-621 3 }
|
||||
tftpDownloadMgt OBJECT IDENTIFIER ::= { HME-621 4 }
|
||||
restartMgt OBJECT IDENTIFIER ::= { HME-621 5 }
|
||||
portMirrorMgt OBJECT IDENTIFIER ::= { HME-621 6 }
|
||||
igmpMgt OBJECT IDENTIFIER ::= { HME-621 7 }
|
||||
X-RingMgt OBJECT IDENTIFIER ::= { HME-621 8 }
|
||||
ipSecurityMgt OBJECT IDENTIFIER ::= { HME-621 9 }
|
||||
specificTrap OBJECT IDENTIFIER ::= { HME-621 10 }
|
||||
powerAlarmMgt OBJECT IDENTIFIER ::= { HME-621 11 }
|
||||
|
||||
DisplayString ::= TEXTUAL-CONVENTION
|
||||
DISPLAY-HINT "255a"
|
||||
STATUS current
|
||||
DESCRIPTION ""
|
||||
SYNTAX OCTET STRING (SIZE (0..255))
|
||||
|
||||
PortList ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Each octet within this value specifies a set of eight
|
||||
ports, with the first octet specifying ports 1 through
|
||||
8, the second octet specifying ports 9 through 16, etc.
|
||||
Within each octet, the most significant bit represents
|
||||
the lowest numbered port, and the least significant bit
|
||||
represents the highest numbered port. Thus, each port
|
||||
of the bridge is represented by a single bit within the
|
||||
value of this object. If that bit has a value of '1'
|
||||
then that port is included in the set of ports; the port
|
||||
is not included if its bit has a value of '0'."
|
||||
SYNTAX OCTET STRING
|
||||
|
||||
--
|
||||
-- switchInfo
|
||||
--
|
||||
|
||||
swFirmwareVer OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Firmware version."
|
||||
::= { switchInfo 1 }
|
||||
|
||||
swKernelVer OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "System kernel version."
|
||||
::= { switchInfo 2 }
|
||||
|
||||
swHardwareVer OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Hardware version."
|
||||
::= { switchInfo 3 }
|
||||
|
||||
swMacAddress OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The unique MAC address."
|
||||
::= { switchInfo 4 }
|
||||
|
||||
swPowerStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
OK(1),
|
||||
Power2Off(2),
|
||||
Power1Off(3),
|
||||
power1and2Off(4)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicate the switch power status.
|
||||
power1OnPower2On(1),
|
||||
power1OnPower2Off(2),
|
||||
power1OffPower2On(3),
|
||||
power1OffPower2Off(4)
|
||||
|
||||
|
||||
"
|
||||
::= { switchInfo 5 }
|
||||
|
||||
--
|
||||
-- switchPortMgt
|
||||
--
|
||||
|
||||
switchPortMgtTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF SwitchPortMgtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "Table of descriptive and status information about
|
||||
configuration of each switch ports(including expansion slot)
|
||||
in this system."
|
||||
::= { switchPortMgt 1 }
|
||||
|
||||
switchPortMgtEntry OBJECT-TYPE
|
||||
SYNTAX SwitchPortMgtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An entry in the table, containing information
|
||||
about configuration in one switch port of the switch."
|
||||
INDEX { swPortMgtIndex }
|
||||
::= { switchPortMgtTable 1 }
|
||||
|
||||
SwitchPortMgtEntry ::= SEQUENCE
|
||||
{
|
||||
swPortMgtIndex Integer32,
|
||||
swPortMgtPortType INTEGER,
|
||||
swPortMgtSpeedDpxAdmin INTEGER,
|
||||
swPortMgtSpeedDpxInUse INTEGER,
|
||||
swPortMgtFlowCtrlAdmin INTEGER,
|
||||
swPortMgtFlowCtrlInUse INTEGER
|
||||
}
|
||||
|
||||
swPortMgtIndex OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This object identifies the port within the switch
|
||||
for which this entry contains information."
|
||||
::= { switchPortMgtEntry 1 }
|
||||
|
||||
swPortMgtPortType OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
hundredBaseTX(1),
|
||||
hundredBaseFX(2),
|
||||
thousandBaseSX(3),
|
||||
thousandBaseGBIC(4),
|
||||
other(5),
|
||||
notPresent(6)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicate the port type."
|
||||
::= { switchPortMgtEntry 2 }
|
||||
|
||||
swPortMgtSpeedDpxAdmin OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
halfDuplex10(1),
|
||||
fullDuplex10(2),
|
||||
halfDuplex100(3),
|
||||
fullDuplex100(4),
|
||||
autoNegotiation(5)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Set the port speed and duplex mode as follows:
|
||||
halfDuplex10(1) - 10Mbps and half duplex mode
|
||||
fullDuplex10(2) - 10Mbps and full duplex mode
|
||||
halfDuplex100(3) - 100Mbps and half duplex mode
|
||||
fullDuplex100(4) - 100Mbps and full duplex mode
|
||||
autoNegotiation(5) - let the switch to negotiate
|
||||
with the other end of connection.
|
||||
hundredBaseTX port can be set as
|
||||
halfDuplex10(1)
|
||||
fullDuplex10(2)
|
||||
halfDuplex100(3)
|
||||
fullDuplex100(4)
|
||||
autoNegotiation(5)
|
||||
hundredBaseFX port can be set as
|
||||
halfDuplex100(3)
|
||||
fullDuplex100(4)
|
||||
The actual operating speed and duplex of the port
|
||||
is given by swPortMgtSpeedDpxInUse."
|
||||
DEFVAL { autoNegotiation }
|
||||
::= { switchPortMgtEntry 3 }
|
||||
|
||||
swPortMgtSpeedDpxInUse OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
halfDuplex10(1),
|
||||
fullDuplex10(2),
|
||||
halfDuplex100(3),
|
||||
fullDuplex100(4),
|
||||
autoNegotiation(5)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The operating speed and duplex mode of the
|
||||
switched port."
|
||||
::= { switchPortMgtEntry 4 }
|
||||
|
||||
swPortMgtFlowCtrlAdmin OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
disable(1),
|
||||
asymmetric(2),
|
||||
symmetric(3)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION ""
|
||||
DEFVAL { enabled }
|
||||
::= { switchPortMgtEntry 5 }
|
||||
|
||||
swPortMgtFlowCtrlInUse OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
disable(1),
|
||||
asymmetric(2),
|
||||
symmetric(3)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION ""
|
||||
::= { switchPortMgtEntry 6 }
|
||||
|
||||
--
|
||||
-- systemSTAMgt
|
||||
--
|
||||
|
||||
systemSTAStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Global spanning tree status.
|
||||
(1) Spanning tree protocol is enabled.
|
||||
(2) Spanning tree protocol is disabled. "
|
||||
--DEFVAL { enabled }
|
||||
::= { systemSTAMgt 1 }
|
||||
|
||||
--
|
||||
-- tftpDownloadMgt
|
||||
--
|
||||
|
||||
tftpDownloadServerIP OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The IP address of a TFTP server from which a
|
||||
firmware image can be downloaded."
|
||||
DEFVAL { '00000000'H }
|
||||
::= { tftpDownloadMgt 1 }
|
||||
|
||||
tftpDownloadAgentBoardFwFileName OBJECT-TYPE
|
||||
SYNTAX DisplayString(SIZE(0..80))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION ""
|
||||
DEFVAL { "image.bin" }
|
||||
::= { tftpDownloadMgt 2 }
|
||||
|
||||
tftpDownloadAgentBoardFwDownloadFunction OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
backupConfiguration(1),
|
||||
restoreConfiguration(2),
|
||||
updateFirmware(3)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "BackupConfiguration(1):Back up switch configuration to tftp server and
|
||||
saving as a file.
|
||||
RestoreConfiguration(2):Restore configuration file from tftp server
|
||||
to switch.After restoring configuration, system will reboot automatically.
|
||||
UpdateFirmware(3):Download new version firmware from tftp server and update
|
||||
switch firmware.After update firmware, system will reboot automatically."
|
||||
DEFVAL { UpdateFirmware }
|
||||
::= { tftpDownloadMgt 3 }
|
||||
|
||||
tftpDownloadStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
active(1),
|
||||
notActive(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Setting this object to active(1) triger the TFTP
|
||||
download action.
|
||||
Setting this object to notActive(2) has no effect.
|
||||
The system always returns the value notActive(2)
|
||||
when this object is read."
|
||||
::= { tftpDownloadMgt 4 }
|
||||
|
||||
--
|
||||
-- restartMgt
|
||||
--
|
||||
|
||||
restartOptionPOST OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Setting this object as enabled. The system will do POST
|
||||
when it restart"
|
||||
DEFVAL { enabled }
|
||||
::= { restartMgt 1 }
|
||||
|
||||
restartOptionReloadFactoryDefault OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Setting this object as enabled. The system will do factory
|
||||
reset when it restart"
|
||||
DEFVAL { disabled }
|
||||
::= { restartMgt 2 }
|
||||
|
||||
restartOptionKeepIpSetting OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Setting this object as enabled. The system will keep IP
|
||||
setting when it do factory reset."
|
||||
DEFVAL { disabled }
|
||||
::= { restartMgt 3 }
|
||||
|
||||
restartOptionKeepUserAuthentication OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Setting this object as enabled. The system will keep user
|
||||
authentication setting when it do factory reset."
|
||||
DEFVAL { disabled }
|
||||
::= { restartMgt 4 }
|
||||
|
||||
restartAction OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
active(1),
|
||||
notActive(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Setting this object to active(1) triger the system
|
||||
restart.
|
||||
Setting this object to notActive(2) has no effect.
|
||||
The system always returns the value notActive(2)
|
||||
when this object is read."
|
||||
::= { restartMgt 5 }
|
||||
|
||||
--
|
||||
-- portMirrorMgt
|
||||
--
|
||||
|
||||
portMirrorStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Port mirroring function status.
|
||||
(1) mirroring function is enabled.
|
||||
(2) mirroring function is disabled."
|
||||
::= { portMirrorMgt 1 }
|
||||
|
||||
portMirrorSnifferPort OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Port Id(1~8) of sniffer port to which all
|
||||
frames to/from mirrored ports are sent. Frames
|
||||
are only mirrored if the portMirrorStatus object
|
||||
is set to enabled(1)."
|
||||
::= { portMirrorMgt 2 }
|
||||
|
||||
|
||||
portMirrorMirroredPort OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The set of ports which are mirrored. The traffic of
|
||||
mirrored port will be 'copied' to sniffer port."
|
||||
--DESCRIPTION "Linear port number of mirrored port. The traffic of
|
||||
-- mirrored port will be 'copied' to sniffer port."
|
||||
::= { portMirrorMgt 3 }
|
||||
|
||||
portMirrorMode OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
both(1),
|
||||
tx(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Port mirroring function mode.
|
||||
(1) mirroring rx and tx frame.
|
||||
(2) mirroring tx frame."
|
||||
::= { portMirrorMgt 4 }
|
||||
--
|
||||
-- igmpMgt
|
||||
--
|
||||
|
||||
igmpStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
|
||||
When enabled, the device will examine IGMP packets and set
|
||||
up filters for IGMP ports.
|
||||
|
||||
The Internet Group Management Protocol (IGMP) is an internal
|
||||
protocol of the Internet Protocol (IP) suite. IP manages
|
||||
multicast traffic by using switches, routers, and hosts that
|
||||
support IGMP. Enabling IGMP allows the ports to detect IGMP
|
||||
queries and report packets and manage IP multicast traffic
|
||||
through the switch. IGMP have three fundamental types of
|
||||
message as follows:
|
||||
|
||||
Message Description
|
||||
--------------------------------------------------------------
|
||||
Query A message sent from the querier (IGMP router or switch)
|
||||
asking for a response from each host belonging to the
|
||||
multicast group.
|
||||
|
||||
Report A message sent by a host to the querier to indicate
|
||||
that the host wants to be or is a member of a given
|
||||
group indicated in the report message.
|
||||
|
||||
Leave Group A message sent by a host to the querier to indicate
|
||||
that the host has quit to be a member of a specific
|
||||
multicast group.
|
||||
|
||||
You can enable IGMP protocol and IGMP Query function. You will see
|
||||
the IGMP snooping information in this section -- difference
|
||||
multicast group VID and member port, and IP multicast addresses
|
||||
range from 224.0.0.0 through 239.255.255.255."
|
||||
::= { igmpMgt 1 }
|
||||
|
||||
igmpQuery OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "(1)Detect querier automatically.
|
||||
(2)Force to be a querier.
|
||||
(3)Be a silence snooper.
|
||||
The mode of querier."
|
||||
::= { igmpMgt 2 }
|
||||
|
||||
|
||||
igmpEntriesTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF IgmpEntriesEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "Table of descriptive information about
|
||||
IGMP entries."
|
||||
::= { igmpMgt 3 }
|
||||
|
||||
igmpEntriesEntry OBJECT-TYPE
|
||||
SYNTAX IgmpEntriesEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An entry in the table, containing inforamtion
|
||||
about IGMP."
|
||||
INDEX { igmpEntriesEntryIndex }
|
||||
::= { igmpEntriesTable 1 }
|
||||
|
||||
IgmpEntriesEntry ::= SEQUENCE
|
||||
{
|
||||
igmpEntriesEntryIndex Integer32,
|
||||
igmpEntriesEntryIPAddr IpAddress,
|
||||
igmpEntriesEntryVID Integer32,
|
||||
igmpEntriesEntryMembers PortList
|
||||
}
|
||||
|
||||
igmpEntriesEntryIndex OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Index of IGMP table."
|
||||
::= { igmpEntriesEntry 1 }
|
||||
|
||||
igmpEntriesEntryIPAddr OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The IP address of an IGMP entry."
|
||||
::= { igmpEntriesEntry 2 }
|
||||
|
||||
igmpEntriesEntryVID OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The VLAN ID of an IGMP entry."
|
||||
::= { igmpEntriesEntry 3 }
|
||||
|
||||
igmpEntriesEntryMembers OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The member ports mask of IGMP entry."
|
||||
::= { igmpEntriesEntry 4 }
|
||||
|
||||
|
||||
--
|
||||
-- X-RingMgt
|
||||
--
|
||||
X-RingStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "X- Ring funtion status.
|
||||
(1) X- Ring function is enabled.
|
||||
(2) X- Ring function is disabled."
|
||||
::= { X-RingMgt 1 }
|
||||
|
||||
X-RingRingPort1 OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Port Id(1~8) will be working port.
|
||||
The system will automatically decide which port
|
||||
is working port and which port is backup port if
|
||||
the X-RingStatus object is set to enabled(1)."
|
||||
::= { X-RingMgt 2 }
|
||||
|
||||
|
||||
X-RingRingPort2 OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Port Id(1~8) will be working port.
|
||||
The system will automatically decide which port
|
||||
is working port and which port is backup port if
|
||||
the X-RingStatus object is set to enabled(1)."
|
||||
::= { X-RingMgt 3 }
|
||||
|
||||
X-RingCoupleRingStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Couple Ring function status.
|
||||
(1) Couple Ring function is enabled.
|
||||
(2) Couple Ring function is disabled.
|
||||
This item can't be modified if X-RingStatus
|
||||
object is set to disabled(2)
|
||||
"
|
||||
::= { X-RingMgt 4 }
|
||||
|
||||
X-RingCouplingPort OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Coupling Port."
|
||||
::= { X-RingMgt 5 }
|
||||
|
||||
X-RingControlPort OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Control Port."
|
||||
::= { X-RingMgt 6 }
|
||||
|
||||
X-RingDualHomingStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Couple Ring function status.
|
||||
(1) Dual Homing function is enabled.
|
||||
(2) Dual Homing function is disabled.
|
||||
This item can't be modified if X-RingStatus
|
||||
object is set to disabled(2)
|
||||
"
|
||||
::= { X-RingMgt 7 }
|
||||
|
||||
X-RingHomingPort OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Homing Port."
|
||||
::= { X-RingMgt 8 }
|
||||
|
||||
--
|
||||
-- ipSecurityMgt
|
||||
--
|
||||
ipSecurityStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IP Security funtion status.
|
||||
(1) IP Security function is enabled.
|
||||
(2) IP Security function is disabled."
|
||||
::= { ipSecurityMgt 1 }
|
||||
|
||||
ipSecuritySecurityIP1 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 2 }
|
||||
|
||||
ipSecuritySecurityIP2 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 3 }
|
||||
|
||||
ipSecuritySecurityIP3 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 4 }
|
||||
|
||||
ipSecuritySecurityIP4 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 5 }
|
||||
|
||||
ipSecuritySecurityIP5 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 6 }
|
||||
|
||||
ipSecuritySecurityIP6 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 7 }
|
||||
|
||||
ipSecuritySecurityIP7 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 8 }
|
||||
|
||||
ipSecuritySecurityIP8 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 9 }
|
||||
|
||||
ipSecuritySecurityIP9 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 10 }
|
||||
|
||||
ipSecuritySecurityIP10 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This IP address can access and manage the
|
||||
switch through the Web browser."
|
||||
::= { ipSecurityMgt 11 }
|
||||
|
||||
--
|
||||
--specificTrap
|
||||
--
|
||||
|
||||
trapPowerStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
OK(1),
|
||||
Power2Off(2),
|
||||
Power1Off(3),
|
||||
power1and2Off(4)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicate the power status
|
||||
power1On_power2On(1),
|
||||
power1On_power2Off(2),
|
||||
power1Off_power2On(3),
|
||||
power1Off_power2Off(4)"
|
||||
::= { specificTrap 1 }
|
||||
|
||||
trapLinkDownAlarm OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
alarm(1),
|
||||
normal(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicate port link down event alarm status"
|
||||
::= { specificTrap 2 }
|
||||
|
||||
trapFaultRelay OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
on(1),
|
||||
off(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicate fault relay status"
|
||||
::= { specificTrap 3 }
|
||||
|
||||
trapTopologyChange OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicate the number of topology change event occurred"
|
||||
::= { specificTrap 4 }
|
||||
|
||||
power1Alarm OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Configure power 1 alarm enabled/disable"
|
||||
::= { powerAlarmMgt 1 }
|
||||
|
||||
power2Alarm OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Configure power 2 alarm enabled/disable"
|
||||
::= { powerAlarmMgt 2 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user