WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

757
mibs/electroline/DMON-PHY-MIB Normal file
View File

@ -0,0 +1,757 @@
DMON-PHY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
IpAddress,
Unsigned32,
Integer32,
Counter32,
enterprises
FROM SNMPv2-SMI
RowStatus,
DateAndTime,
TimeInterval,
StorageType,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
TenthdB,
TenthdBmV,
DocsEqualizerData
FROM DOCS-IF-MIB
ModulationType,
dmonMib
FROM DMON-MIB;
dmonPhyGroup MODULE-IDENTITY
LAST-UPDATED "201111041400Z"
ORGANIZATION ""
CONTACT-INFO
"
Postal:
E-mail: "
DESCRIPTION
"
This is the MIB module for DMON PHY measurement.
History
MG - 09/09/2011
-Updated UNITS from centidBmV to TenthdBmV
-Updated MER OIDS UNITS from TenthdBmV to TenthdB
MG - 09/23/2011
-Change units from billionth to trillionth
MG - 11/04/2011
-Added
-dmonPhyInfoManagement
-dmonPhyInfoMgtHistoryRetention
-Change UNITS from TenthdBmv to dBmv
-Change UNITS from TenthdB to dB
"
::= { dmonMib 1 }
--
-- The following group defines the managment of the DMon Phy History Management
--
dmonPhyInfoManagement OBJECT IDENTIFIER ::= { dmonPhyGroup 1 }
dmonPhyInfoMgtHistoryRetention OBJECT-TYPE
SYNTAX Unsigned32 (3600..10000000000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The total amount of seconds that the DMon must retain PHY History in RAM memory.
Once this OID value is set, it MUST be preserved in non-volatile memory
and required a reboot to go into effect.
The DMon MUST retain a Minimum of 3600 seconds of history
"
DEFVAL {86400} -- 24Hours
::= { dmonPhyInfoManagement 1 }
dmonPhyInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmonPhyInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of downstream
channels (frequency bands)."
::= { dmonPhyGroup 2 }
dmonPhyInfoEntry OBJECT-TYPE
SYNTAX DmonPhyInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry provides a list of attributes for a single
downstream channel.
An entry in this table exists for each downstream channel"
INDEX { dmonPhyChannelIndex }
::= { dmonPhyInfoTable 1 }
DmonPhyInfoEntry ::= SEQUENCE {
dmonPhyChannelIndex Integer32,
dmonPhyChannelLockedtime DateAndTime,
dmonPhyChannelFrequency Integer32,
dmonPhyChannelModulation ModulationType,
dmonPhyChannelPower TenthdBmV,
dmonPhyChannelAnnex INTEGER,
dmonPhyChannelSigQUnerroreds Counter32,
dmonPhyChannelSigQCorrecteds Counter32,
dmonPhyChannelSigQUncorrectables Counter32,
dmonPhyChannelSigQMER TenthdB,
dmonPhyChannelSigQPreFECBER Integer32,
dmonPhyChannelSigQPostFECBER Integer32,
dmonPhyChannelSigQCER Integer32,
dmonPhyChannelSigQECR Integer32,
dmonPhyChannelInterleave INTEGER,
dmonPhyChannelSigQEqualizationData DocsEqualizerData,
dmonPhyChannelSigScanId Integer32,
dmonPhyChannelPowerMin TenthdBmV,
dmonPhyChannelPowerMax TenthdBmV,
dmonPhyChannelSigQMERMin TenthdB,
dmonPhyChannelSigQMERMax TenthdB,
dmonPhyChannelScanMode INTEGER,
dmonPhyChannelQAMlocked TruthValue,
dmonPhyChannelFEClocked TruthValue
}
dmonPhyChannelIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The downstream channel index starting from 1."
::= { dmonPhyInfoEntry 1 }
dmonPhyChannelLockedtime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time of the reading"
::= { dmonPhyInfoEntry 2 }
dmonPhyChannelFrequency OBJECT-TYPE
SYNTAX Integer32 (0..1000000000)
UNITS "hertz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The center of the downstream frequency associated with
this channel. This object will return the current tuner
frequency."
::= { dmonPhyInfoEntry 3 }
dmonPhyChannelModulation OBJECT-TYPE
SYNTAX ModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The modulation type associated with this downstream
channel. If the interface is down, this object either
returns the most current value, or the value of unknown(1)."
::= { dmonPhyInfoEntry 4 }
dmonPhyChannelPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received power level of the channel.
If the interface is down, this object either returns
the most current value or the value of 0. See the reference
for recommended and required power levels."
::= { dmonPhyInfoEntry 5 }
dmonPhyChannelAnnex OBJECT-TYPE
SYNTAX INTEGER {
unknown(-1),
annexB(0),
annexA(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-T J.83 is used.
(equivalent to EN 300 429)
annexB : Annex B from ITU-T J.83 is used.
annexC : Annex C from ITU-T J.83 is used."
::= { dmonPhyInfoEntry 6 }
dmonPhyChannelSigQUnerroreds OBJECT-TYPE
SYNTAX Counter32
UNITS "codewords"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Codewords received on this channel without error."
::= { dmonPhyInfoEntry 7 }
dmonPhyChannelSigQCorrecteds OBJECT-TYPE
SYNTAX Counter32
UNITS "codewords"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Codewords received on this channel with correctable
errors."
::= { dmonPhyInfoEntry 8 }
dmonPhyChannelSigQUncorrectables OBJECT-TYPE
SYNTAX Counter32
UNITS "codewords"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Codewords received on this channel with uncorrectable
errors."
::= { dmonPhyInfoEntry 9 }
dmonPhyChannelSigQMER OBJECT-TYPE
SYNTAX TenthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Modulation error ratio of the monitored channel"
REFERENCE
"Data-Over-Cable Service Interface Specifications: Physical
Layer Specification CM-SP-PHYv3.0-I07-080522,
Section 6.2.22.3"
::= { dmonPhyInfoEntry 10 }
dmonPhyChannelSigQPreFECBER OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit-error-rate of the monitored channel before FEC repair"
::= { dmonPhyInfoEntry 11 }
dmonPhyChannelSigQPostFECBER OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit-error-rate of the monitored channel after FEC repair"
::= { dmonPhyInfoEntry 12 }
dmonPhyChannelSigQCER OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"codeword-error-rate of the monitored channel"
::= { dmonPhyInfoEntry 13 }
dmonPhyChannelSigQECR OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"codeword error-corrected-rate of the monitored channel"
::= { dmonPhyInfoEntry 14 }
dmonPhyChannelInterleave OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
taps8Increment16(3),
taps16Increment8(4),
taps32Increment4(5),
taps64Increment2(6),
taps128Increment1(7),
taps12increment17(8),
taps128Increment2(9),
taps128Increment3(10),
taps128Increment4(11),
taps128Increment5(12),
taps128Increment6(13),
taps128Increment7(14),
taps128Increment8(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Forward Error Correction (FEC) interleaving used
for this downstream channel.
Values are defined as follows:
taps8Increment16(3): protection 5.9/4.1 usec,
latency .22/.15 msec
taps16Increment8(4): protection 12/8.2 usec,
latency .48/.33 msec
taps32Increment4(5): protection 24/16 usec,
latency .98/.68 msec
taps64Increment2(6): protection 47/33 usec,
latency 2/1.4 msec
taps128Increment1(7): protection 95/66 usec,
latency 4/2.8 msec
taps12increment17(8): protection 18/14 usec,
latency 0.43/0.32 msec
The value 'taps12increment17' is supported by EuroDOCSIS
cable systems only, and the others by DOCSIS cable systems.
If the interface is down, this object either returns
the configured value (CMTS), the most current value (CM),
or the value of unknown(1).
The value of other(2) is returned if the interleave
is known but not defined in the above list.
See the associated conformance object for write
conditions and limitations. See the reference for the FEC
configuration described by the setting of this object."
::= { dmonPhyInfoEntry 15 }
dmonPhyChannelSigQEqualizationData OBJECT-TYPE
SYNTAX DocsEqualizerData
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the equalization data for
the downstream channel."
::= { dmonPhyInfoEntry 16 }
dmonPhyChannelSigScanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message.
It will help the CPS to identify the data set."
::= { dmonPhyInfoEntry 17 }
dmonPhyChannelPowerMin OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min value of the received power level of the channel
during the dwelling time."
::= { dmonPhyInfoEntry 18 }
dmonPhyChannelPowerMax OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max value of the received power level of the channel
during the dwelling time."
::= { dmonPhyInfoEntry 19 }
dmonPhyChannelSigQMERMin OBJECT-TYPE
SYNTAX TenthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min value of the modulation error ratio of the monitored channel
during the dwelling time."
::= { dmonPhyInfoEntry 20 }
dmonPhyChannelSigQMERMax OBJECT-TYPE
SYNTAX TenthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max value of the modulation error ratio of the monitored channel
during the dwelling time."
::= { dmonPhyInfoEntry 21 }
dmonPhyChannelScanMode OBJECT-TYPE
SYNTAX INTEGER {
defaultScan (0),
fastScan (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the result of the
measurement is from."
::= { dmonPhyInfoEntry 22 }
dmonPhyChannelQAMlocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether QAM is locked. If not locked, Most of the
columns in this entry are not valid."
DEFVAL { false }
::= { dmonPhyInfoEntry 23 }
dmonPhyChannelFEClocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether FEC is locked. If not locked, post FEC values
in this entry are not valid."
DEFVAL { false }
::= { dmonPhyInfoEntry 24 }
dmonPhyHistoryInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmonPhyHistoryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the history attributes of downstream
channels (frequency bands)."
::= { dmonPhyGroup 3 }
dmonPhyHistoryInfoEntry OBJECT-TYPE
SYNTAX DmonPhyHistoryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry provides a list of history attributes for a single
downstream channel.
An entry in this table exists for each downstream channel"
INDEX {
dmonPhyHistoryChannelIndex,
dmonPhyHistoryIndex
}
::= { dmonPhyHistoryInfoTable 1 }
DmonPhyHistoryInfoEntry ::= SEQUENCE {
dmonPhyHistoryChannelIndex Integer32,
dmonPhyHistoryIndex Integer32,
dmonPhyHistoryChannelLockedtime DateAndTime,
dmonPhyHistoryChannelFrequency Integer32,
dmonPhyHistoryChannelModulation ModulationType,
dmonPhyHistoryChannelPower TenthdBmV,
dmonPhyHistoryChannelAnnex INTEGER,
dmonPhyHistoryChannelSigQUnerroreds Counter32,
dmonPhyHistoryChannelSigQCorrecteds Counter32,
dmonPhyHistoryChannelSigQUncorrectables Counter32,
dmonPhyHistoryChannelSigQMER TenthdB,
dmonPhyHistoryChannelSigQPreFECBER Integer32,
dmonPhyHistoryChannelSigQPostFECBER Integer32,
dmonPhyHistoryChannelSigQCER Integer32,
dmonPhyHistoryChannelSigQECR Integer32,
dmonPhyHistoryChannelInterleave INTEGER,
dmonPhyHistoryChannelSigQEqualizationData DocsEqualizerData,
dmonPhyHistoryChannelSigScanId Integer32,
dmonPhyHistoryChannelPowerMin TenthdBmV,
dmonPhyHistoryChannelPowerMax TenthdBmV,
dmonPhyHistoryChannelSigQMERMin TenthdB,
dmonPhyHistoryChannelSigQMERMax TenthdB,
dmonPhyHistoryChannelScanMode INTEGER,
dmonPhyHistoryChannelQAMlocked TruthValue,
dmonPhyHistoryChannelFEClocked TruthValue
}
dmonPhyHistoryChannelIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The history downstream channel index starting from 1."
::= { dmonPhyHistoryInfoEntry 1 }
dmonPhyHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..9)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The history index starting from 1."
::= { dmonPhyHistoryInfoEntry 2 }
dmonPhyHistoryChannelLockedtime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history date and time of the reading"
::= { dmonPhyHistoryInfoEntry 3 }
dmonPhyHistoryChannelFrequency OBJECT-TYPE
SYNTAX Integer32 (0..1000000000)
UNITS "hertz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history center of the downstream frequency associated with
this channel. This object will return the current tuner
frequency."
::= { dmonPhyHistoryInfoEntry 4 }
dmonPhyHistoryChannelModulation OBJECT-TYPE
SYNTAX ModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history modulation type associated with this downstream
channel. If the interface is down, this object either
returns the most current value, or the value of unknown(1)."
::= { dmonPhyHistoryInfoEntry 5 }
dmonPhyHistoryChannelPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history received power level of the channel.
If the interface is down, this object either returns
the most current value or the value of 0. See the reference
for recommended and required power levels."
::= { dmonPhyHistoryInfoEntry 6 }
dmonPhyHistoryChannelAnnex OBJECT-TYPE
SYNTAX INTEGER {
unknown(-1),
annexB(0),
annexA(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-T J.83 is used.
(equivalent to EN 300 429)
annexB : Annex B from ITU-T J.83 is used.
annexC : Annex C from ITU-T J.83 is used."
::= { dmonPhyHistoryInfoEntry 7 }
dmonPhyHistoryChannelSigQUnerroreds OBJECT-TYPE
SYNTAX Counter32
UNITS "codewords"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history codewords received on this channel without error."
::= { dmonPhyHistoryInfoEntry 8 }
dmonPhyHistoryChannelSigQCorrecteds OBJECT-TYPE
SYNTAX Counter32
UNITS "codewords"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history codewords received on this channel with correctable
errors."
::= { dmonPhyHistoryInfoEntry 9 }
dmonPhyHistoryChannelSigQUncorrectables OBJECT-TYPE
SYNTAX Counter32
UNITS "codewords"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history codewords received on this channel with uncorrectable
errors."
::= { dmonPhyHistoryInfoEntry 10 }
dmonPhyHistoryChannelSigQMER OBJECT-TYPE
SYNTAX TenthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history modulation error ratio of the monitored channel"
REFERENCE
"Data-Over-Cable Service Interface Specifications: Physical
Layer Specification CM-SP-PHYv3.0-I07-080522,
Section 6.2.22.3"
::= { dmonPhyHistoryInfoEntry 11 }
dmonPhyHistoryChannelSigQPreFECBER OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history bit-error-rate of the monitored channel before FEC repair"
::= { dmonPhyHistoryInfoEntry 12 }
dmonPhyHistoryChannelSigQPostFECBER OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history bit-error-rate of the monitored channel after FEC repair"
::= { dmonPhyHistoryInfoEntry 13 }
dmonPhyHistoryChannelSigQCER OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history codeword-error-rate of the monitored channel"
::= { dmonPhyHistoryInfoEntry 14 }
dmonPhyHistoryChannelSigQECR OBJECT-TYPE
SYNTAX Integer32
UNITS "trillionth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history codeword error-corrected-rate of the monitored channel"
::= { dmonPhyHistoryInfoEntry 15 }
dmonPhyHistoryChannelInterleave OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
taps8Increment16(3),
taps16Increment8(4),
taps32Increment4(5),
taps64Increment2(6),
taps128Increment1(7),
taps12increment17(8),
taps128Increment2(9),
taps128Increment3(10),
taps128Increment4(11),
taps128Increment5(12),
taps128Increment6(13),
taps128Increment7(14),
taps128Increment8(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history Forward Error Correction (FEC) interleaving used
for this downstream channel.
Values are defined as follows:
taps8Increment16(3): protection 5.9/4.1 usec,
latency .22/.15 msec
taps16Increment8(4): protection 12/8.2 usec,
latency .48/.33 msec
taps32Increment4(5): protection 24/16 usec,
latency .98/.68 msec
taps64Increment2(6): protection 47/33 usec,
latency 2/1.4 msec
taps128Increment1(7): protection 95/66 usec,
latency 4/2.8 msec
taps12increment17(8): protection 18/14 usec,
latency 0.43/0.32 msec
The value 'taps12increment17' is supported by EuroDOCSIS
cable systems only, and the others by DOCSIS cable systems.
If the interface is down, this object either returns
the configured value (CMTS), the most current value (CM),
or the value of unknown(1).
The value of other(2) is returned if the interleave
is known but not defined in the above list.
See the associated conformance object for write
conditions and limitations. See the reference for the FEC
configuration described by the setting of this object."
::= { dmonPhyHistoryInfoEntry 16 }
dmonPhyHistoryChannelSigQEqualizationData OBJECT-TYPE
SYNTAX DocsEqualizerData
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the hisotry equalization data for
the downstream channel."
::= { dmonPhyHistoryInfoEntry 17 }
dmonPhyHistoryChannelSigScanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message.
It will help the CPS to identify the data set."
::= { dmonPhyHistoryInfoEntry 18 }
dmonPhyHistoryChannelPowerMin OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min value of the received power level of the channel
during the dwelling time."
::= { dmonPhyHistoryInfoEntry 19 }
dmonPhyHistoryChannelPowerMax OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max value of the received power level of the channel
during the dwelling time."
::= { dmonPhyHistoryInfoEntry 20 }
dmonPhyHistoryChannelSigQMERMin OBJECT-TYPE
SYNTAX TenthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min value of the modulation error ratio of the monitored channel
during the dwelling time."
::= { dmonPhyHistoryInfoEntry 21 }
dmonPhyHistoryChannelSigQMERMax OBJECT-TYPE
SYNTAX TenthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max value of the modulation error ratio of the monitored channel
during the dwelling time."
::= { dmonPhyHistoryInfoEntry 22 }
dmonPhyHistoryChannelScanMode OBJECT-TYPE
SYNTAX INTEGER {
defaultScan (0),
fastScan (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the result of the
measurement is from."
::= { dmonPhyHistoryInfoEntry 23 }
dmonPhyHistoryChannelQAMlocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether QAM is locked. If not locked, Most of the
columns in this entry are not valid."
DEFVAL { false }
::= { dmonPhyHistoryInfoEntry 24 }
dmonPhyHistoryChannelFEClocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether FEC is locked. If not locked, post FEC values
in this entry are not valid."
DEFVAL { false }
::= { dmonPhyHistoryInfoEntry 25 }
END