initial commit; version 22.5.12042

mibs/cradlepoint/CP-ETHERNET-MIB

@@ -0,0 +1,168 @@
+CP-ETHERNET-MIB DEFINITIONS ::= BEGIN
+
+-- Cradlepoint Ethernet MIB Release 1.1
+
+-- Copyright 2008-2019 by CradlePoint, Inc.  All rights reserved
+
+-- This Specification is supplied "AS IS", CradlePoint makes no warranty,
+-- either expressed or implied, as to the use, operation, condition,
+-- or performance of the Specification.
+
+IMPORTS
+     wipipeEthernet                             FROM WIPIPE-MIB;
+
+ethernetPortTable        OBJECT-TYPE
+    SYNTAX     SEQUENCE OF ethernetPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Ethernet port table. This table contains one entry per physical Ethernet
+         port."
+            ::= { wipipeEthernet 1 }
+
+ethernetPortTraps      OBJECT IDENTIFIER ::= { wipipeEthernet 2 }
+
+
+ethernetPortEntry OBJECT-TYPE
+    SYNTAX      EthernetPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing management information applicable to a
+            particular physical Ethernet port."
+    INDEX   { portIndex }
+    ::= { ethernetPortTable 1 }
+
+
+EthernetPortEntry ::=
+    SEQUENCE {
+        portIndex                 INTEGER,
+        portDescr                 DisplayString,
+	portOperStatus            INTEGER,
+	portAdminStatus           INTEGER,
+	portPseDetectionStatus    INTEGER,
+	portPseClass              INTEGER,
+	portPsePower              INTEGER,
+    }
+
+portIndex OBJECT-TYPE
+    SYNTAX      INTEGER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A unique value, starting at 1, for each physical Ethernet port.  
+             The value is expected to remain constant for a given port after 
+                reboot."
+    ::= { ethernetPortEntry 1 }
+
+portDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual string containing information about the
+		Ethernet port."
+    ::= { ethernetPortEntry 2 }
+
+
+portAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+           up(1),
+           down(2),
+     }
+
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current administrative status of the port."
+
+    ::= { ethernetPortEntry 3 }
+
+
+portOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+           up(1),        -- ready to pass packets
+           down(2),
+     }
+
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current operational status of the port."
+
+    ::= { ethernetPortEntry 4 }
+
+
+portPseDetectionStatus OBJECT-TYPE
+    SYNTAX INTEGER   {
+             normal-device(1),
+             legacy-device(2),
+             powered-device(3),
+             no-device(4),
+             error-detected(5)
+     }
+
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Describes the operational status of the port PD detection."
+    ::= { ethernetPortEntry 5 }
+
+
+portPseClass OBJECT-TYPE
+    SYNTAX INTEGER   {
+             CLASS-INVALID(-1),
+             CLASS-UNKNOWN(0),
+             CLASS-1(1),
+             CLASS-2(2),
+             CLASS-3(3),
+             CLASS-4(4),
+             CLASS-5(5),
+             CLASS-6(6),
+             CLASS-7(7),
+             CLASS-8(8)
+     }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Describes the PSE class of the device."
+    ::= { ethernetPortEntry 6 }
+
+portPsePower OBJECT-TYPE
+    SYNTAX INTEGER   {
+             on(1),
+             off(2)
+     }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "On-off state of the PoE device."
+    ::= { ethernetPortEntry 7 }
+
+portDown NOTIFICATION-TYPE
+    OBJECTS { portIndex, portDescr, portOperStatus, portAdminStatus }
+    STATUS  current
+    DESCRIPTION
+            "A portDown trap indicates that the Ethernet port went down 
+             from the operational stage."
+    ::= { ethernetPortTraps 1 }
+
+portUp NOTIFICATION-TYPE
+    OBJECTS { portIndex, portDescr, portOperStatus, portAdminStatus }
+    STATUS  current
+    DESCRIPTION
+            "A portUp trap indicates that the Ethernet port came up and
+                is in operational stage."
+    ::= { ethernetPortTraps 2}
+
+portPsePortStatusChangeNotification NOTIFICATION-TYPE
+         OBJECTS     { portIndex, portDescr, portPseDetectionStatus, 
+                        portPsePower, portPseClass }
+         STATUS      current
+         DESCRIPTION
+             "This trap indicates a change in status of PSE as indicated 
+                in the portPseDetectionStatus object."
+    ::= { ethernetPortTraps 3 }
+
+END
+