WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

931
mibs/cisco/CISCO-WAN-LAPD-TRUNK-MIB Normal file
View File

@ -0,0 +1,931 @@
-- *****************************************************************
-- CISCO-WAN-LAPD-TRUNK-MIB.my: CISCO WAN LAPD Trunk MIB file
--
-- December 2003, George Ogagan
--
-- Copyright (c) 2001-2003 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-WAN-LAPD-TRUNK-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
Integer32,
Counter32,
OBJECT-TYPE
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
voice FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanLapdTrunkMIB MODULE-IDENTITY
LAST-UPDATED "200312110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-vism@cisco.com"
DESCRIPTION
"The MIB module is defined for establishing a Trunk
to transport PRI (Primary Rate Interface) signaling
information over a RUDP (Reliable UDP) connection for
CCS (Common Channel Signaling) VoIP(Voice Over IP)
Trunking application."
REVISION "200312110000Z"
DESCRIPTION
"Update descriptions in the MIB.
"
REVISION "200307170000Z"
DESCRIPTION
"-Added following tables:
vismLapdTable
vismLapdStatsTable
vismLapdDlcTable
These tables were defined in vismLapd.my earlier.
and are now converted to SMIv2 and defined here.
- Added UNITS clause wherever applicable."
REVISION "200307110000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in SMIv1 version. The MIB has been converted to
SMIv2 version and descriptions of some of the objects
have been modified."
::= { ciscoWan 23 }
vismLapdGrp OBJECT IDENTIFIER ::= { voice 12 }
ciscoWanLapdTrunkMIBObjects OBJECT IDENTIFIER ::=
{ ciscoWanLapdTrunkMIB 1 }
vismLapdTrunkGrp OBJECT IDENTIFIER ::=
{ ciscoWanLapdTrunkMIBObjects 1 }
--
-- vismLapdTrunkGrpTable
--
vismLapdTrunkGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismLapdTrunkGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines attributes used to set up a
Trunked LAPD (Link Access Procedure on the
D-channel) connection over RUDP between 2 VISM's
to transport PRI D channel information.
Such a Trunked connection over RUDP can only be
created if the D-channel has already not been
configured for PRI Backhaul. The object
vismLapdTrunkType in vismLapdTable indicate
PRI Backhaul or Trunking is configured, also
an entry will be created for each D channel. PRI
Backhaul and PRI Trunking can co-exist on the
same card but not on the same line, a line (DS1)
is associated with a LAPD RUDP through
vismLapdTrunkRudpIndex.
"
::= { vismLapdTrunkGrp 1 }
vismLapdTrunkGrpEntry OBJECT-TYPE
SYNTAX VismLapdTrunkGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vismLapdTrunkGrpTable.
"
INDEX { vismLapdTrunkNum }
::= { vismLapdTrunkGrpTable 1 }
VismLapdTrunkGrpEntry ::=
SEQUENCE {
vismLapdTrunkNum Integer32,
vismLapdTrunkState INTEGER,
vismLapdTrunkRudpIndex Integer32,
vismLapdTrunkRowStatus RowStatus
}
vismLapdTrunkNum OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the index of vismLapdTrunkGrpTable.
"
::= { vismLapdTrunkGrpEntry 1 }
vismLapdTrunkState OBJECT-TYPE
SYNTAX INTEGER {
oos (1),
is (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'oos' - Out of service state. The LAPD Trunk state
is independent of the RUDP session state in the sense
that the LAPD state could be 'oos' while the RUDP
session state is 'is' and vice versa.
'is' - In service state.
'unknown' - This is the state other than the above states.
If the communication is lost between the 2 VISM's,
the state of this connection becomes 'oos'.
"
::= { vismLapdTrunkGrpEntry 2 }
vismLapdTrunkRudpIndex OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All LAPD Trunk connections are over RUDP. Each RUDP
connection is characterized by a set of negotiable and
non-negotiable parameters. These parameters are in
vismRudpSessionCnfEntry(defined in
CISCO-VISM-SESSION-MIB MIB) table. This object
is an index into that table. Before creating an entry in
this table the corresponding RUDP session entry must be
created in the vismRudpSessionCnfEntry table with the
vismRudpSessionType(defined in the same MIB) as
LAPD Trunking. The RUDP session cannot be deleted
if the corresponding LAPD Trunk still exist. The LAPD
Trunk needs to be deleted before deleting RUDP session
as specified in CISCO-VISM-SESSION-MIB.
"
::= { vismLapdTrunkGrpEntry 3 }
vismLapdTrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable allows the user to add or delete the entry
for this table.
'createAndGo': Use this to add a LAPD Trunk connection in
this table. The vismLapdTrunkRudpIndex for this
corresponding entry has to be specified also.
'active': This value is returned, once the row is created.
'destroy': Use this to delete a LAPD Trunk connection
from this table.
"
::= { vismLapdTrunkGrpEntry 4 }
-- LAPD configuration table.
vismLapdTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismLapdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for maintaining the configuration of
the LAPD channel on VISM.
"
::= { vismLapdGrp 1 }
vismLapdEntry OBJECT-TYPE
SYNTAX VismLapdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for vismLapdTable."
INDEX { vismLapdIndex }
::= { vismLapdTable 1 }
VismLapdEntry ::=
SEQUENCE {
vismLapdIndex Integer32,
vismLapdAppType INTEGER,
vismLapdWinSize Integer32,
vismLapdN200 Integer32,
vismLapdT200 Integer32,
vismLapdT203 Integer32,
vismLapdType INTEGER,
vismLapdRowStatus RowStatus,
vismLapdSide INTEGER,
vismLapdTrunkType INTEGER
}
vismLapdIndex OBJECT-TYPE
SYNTAX Integer32(1..248)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an index to vismLapdTable. This is derived
from the following formula:
index = 31 * (DS1# - 1) + DS0#
where : DS1# - The T1/E1 line number in the range 1 - 8.
DS0# - The DS0 channel number ranging from
1 to 24 for T1 and 1 to 31 for E1.
"
::= { vismLapdEntry 1 }
vismLapdAppType OBJECT-TYPE
SYNTAX INTEGER {
pri(1),
gr-303(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of the LAPD interface.
When the user creates a LAPD entry this object need
to be specified. After creation it cannot be modified.
'pri' - level of service provided by ISDN(Integrated
Services Digital Network) that carries voice,
data, other services with control and signaling
information in D-channel.
'gr-303' - standard interfaces for integrated digital
loop carrier systems.
"
DEFVAL { pri }
::= { vismLapdEntry 2 }
vismLapdWinSize OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The window size - maximum number of sequentially
numbered I-frames that may be outstanding.
"
DEFVAL { 7 }
::= { vismLapdEntry 3 }
vismLapdN200 OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of retransmissions of a frame.
"
DEFVAL { 3 }
::= { vismLapdEntry 4 }
vismLapdT200 OBJECT-TYPE
SYNTAX Integer32 (100..1023000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of time in milliseconds to wait for
acknowledgement for a transmit frame. This value should
be less than vismLapdT203.
For PRI, the range is 1000 ms to 1023000 ms. The
default is 1000 ms.
For GR-303, the range is 100 ms to 350 ms in increments
of 50 ms. The default value is 150 ms.
"
::= { vismLapdEntry 5 }
vismLapdT203 OBJECT-TYPE
SYNTAX Integer32 (1000..1023000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum time (in milliseconds) allowed without
frames being exchanged. This value should be greater
than vismLapdT200. For PRI, the range is 1000 to 1023000
and the default is 10000 ms. For GR-303, the range is
10000 to 300000 ms in increments of 10000 ms. The default
is 30000 ms.
"
::= { vismLapdEntry 6 }
vismLapdType OBJECT-TYPE
SYNTAX INTEGER {
ccitt(1),
att5EssPRA(3),
att4Ess(4),
ntDMS100PRA(6),
vn2or3(7),
insNet(8),
tr6MPC(9),
tr6PBX(10),
ausp(12),
ni1(13),
etsi(14),
bc303TMC(15),
bc303CSC(16),
ntDMS250(17),
bellcore(18),
ni2(19)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies what type of interface the LAPD stack
will be used with.
ccitt(1) : CCITT
att5EssPRA(3) : AT&T 5ESS PRA
att4Ess(4) : AT&T 4ESS
ntDMS100PRA(6) : NT dms100 PRA
vn2or3(7) : VN 2 or VN 3
insNet(8) : INS Net
tr6MPC(9) : tr6 MPC
tr6PBX(10) : tr6 PBX
ausp(12) : Austel Primary
ni1(13) : National ISDN-1
etsi(14) : ETSI
bc303TMC(15) : Bellcorp tr303 tmc
bc303CSC(16) : Bellcorp tr303 csc
ntDMS250(17) : NT dms250
bellcore(18) : Bellcore
ni2(19) : National ISDN-2
"
DEFVAL { ni2 }
::= { vismLapdEntry 7 }
vismLapdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status allows users to create or delete a LAPD entry.
'createAndGo' - this option is use to create an entry in the
table. Before a LAPD entry is created, the session manager
should be set up(add a PRI backhaul session set,
and session group between VISM and the call agent).
Before creating a LAPD entry the entry in HDLC table will
implicitly created first. If the DS0 has already been used
then the request of creating a LAPD channel on the same DS0
on the same line will be rejected. After creating the LAPD
entry the corresponding entry in vismLapdStatsTable will be
implicitly created.
'active' - When an entry is created it becomes active.
'destroy' - Use this to delete an entry in this table. After
implicitly deleting all the entries(if there is any) in
vismLapdDlcEntry table for the specific D channel the entry
in vismLapdEntry will be deleted, then the entry in
vismLapdStatsTable will be implicitly deleted, followed by
the deletion of the HDLC entry.
"
::= { vismLapdEntry 8 }
vismLapdSide OBJECT-TYPE
SYNTAX INTEGER {
network(1),
user(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether LAPD stack is on the
user side or network side.
This object can be set when the row is created. It
cannot be modified for an existing row.
"
DEFVAL { network }
::= { vismLapdEntry 9 }
vismLapdTrunkType OBJECT-TYPE
SYNTAX INTEGER {
backhaul (1),
lapdTrunking (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the line is configured for
Trunking or PRI Backhaul. This object is set to
the appropriate type when the vismRudpSessionType
(defined in CISCO-VISM-SESSION-MIB MIB) parameter
in the vismRudpSessionCnfEntry(specify in the same
MIB) table is set. The motivation to have similar
such objects at two places is for convenience.
"
::= { vismLapdEntry 10 }
-- vismLapdStatsTable
vismLapdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismLapdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics information for all
LAPD (D channel Data Link) interfaces on VISM.
"
::= { vismLapdGrp 2 }
vismLapdStatsEntry OBJECT-TYPE
SYNTAX VismLapdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the LAPD Table."
INDEX { vismLapdStatsIndex }
::= { vismLapdStatsTable 1 }
VismLapdStatsEntry ::= SEQUENCE {
vismLapdStatsIndex Integer32,
vismLapdRxInfoFrames Counter32,
vismLapdTxInfoFrames Counter32,
vismLapdRxReadyFrames Counter32,
vismLapdTxReadyFrames Counter32,
vismLapdRxNotReadyFrames Counter32,
vismLapdTxNotReadyFrames Counter32,
vismLapdRxSABMFrames Counter32,
vismLapdTxSABMFrames Counter32,
vismLapdRxDisconFrames Counter32,
vismLapdTxDisconFrames Counter32,
vismLapdRxUAFrames Counter32,
vismLapdTxUAFrames Counter32,
vismLapdRxDiscModeFrames Counter32,
vismLapdTxDiscModeFrames Counter32,
vismLapdRxFrmRejectFrames Counter32,
vismLapdTxFrmRejectFrames Counter32,
vismLapdRxExchIdFrames Counter32,
vismLapdTxExchIdFrames Counter32,
vismLapdRxUnumInfoFrames Counter32,
vismLapdTxUnumInfoFrames Counter32,
vismLapdRxRejectFrames Counter32,
vismLapdTxRejectFrames Counter32,
vismLapdRxInvalidFrames Counter32
}
vismLapdStatsIndex OBJECT-TYPE
SYNTAX Integer32(1..248)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the index for this table. It is the same as
vismLapdIndex. An entry of this table will be implicitly
created when a LAPD entry is added.
"
::= { vismLapdStatsEntry 1 }
vismLapdRxInfoFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains received information frames on a LAPD.
"
::= { vismLapdStatsEntry 2 }
vismLapdTxInfoFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains information frames transmitted on
a LAPD.
"
::= { vismLapdStatsEntry 3 }
vismLapdRxReadyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Receiver Ready frames received
on a LAPD.
"
::= { vismLapdStatsEntry 4 }
vismLapdTxReadyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Receiver Ready frames transmitted
on LAPD.
"
::= { vismLapdStatsEntry 5 }
vismLapdRxNotReadyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Receiver Not Ready frames
received on LAPD.
"
::= { vismLapdStatsEntry 6 }
vismLapdTxNotReadyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Receiver Not Ready frames
transmitted on a LAPD.
"
::= { vismLapdStatsEntry 7 }
vismLapdRxSABMFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Set Asynchronous Balanced Mode
frames received on a LAPD.
"
::= { vismLapdStatsEntry 8 }
vismLapdTxSABMFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Set Asynchronous Balanced Mode
frames transmitted on LAPD.
"
::= { vismLapdStatsEntry 9 }
vismLapdRxDisconFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Disconnect frames received on LAPD.
"
::= { vismLapdStatsEntry 10 }
vismLapdTxDisconFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Disconnect frames transmitted
on LAPD.
"
::= { vismLapdStatsEntry 11 }
vismLapdRxUAFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Unnumbered Acknowledge frames
received on a LAPD.
"
::= { vismLapdStatsEntry 12 }
vismLapdTxUAFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Unnumbered Acknowledge frames
transmitted on a LAPD.
"
::= { vismLapdStatsEntry 13 }
vismLapdRxDiscModeFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Disconnect Mode frames received
on a LAPD.
"
::= { vismLapdStatsEntry 14 }
vismLapdTxDiscModeFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Disconnect Mode frames transmitted
on a LAPD.
"
::= { vismLapdStatsEntry 15 }
vismLapdRxFrmRejectFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Frame Reject frames received on a
LAPD.
"
::= { vismLapdStatsEntry 16 }
vismLapdTxFrmRejectFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Frame Reject frames transmitted on a
LAPD.
"
::= { vismLapdStatsEntry 17 }
vismLapdRxExchIdFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Exchange Id frames received on a LAPD.
"
::= { vismLapdStatsEntry 18 }
vismLapdTxExchIdFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Exchange Id frames transmitted on
a LAPD.
"
::= { vismLapdStatsEntry 19 }
vismLapdRxUnumInfoFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Unnumbered Information frames
received on a LAPD.
"
::= { vismLapdStatsEntry 20 }
vismLapdTxUnumInfoFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Unnumbered Information frames
transmitted on a LAPD.
"
::= { vismLapdStatsEntry 21 }
vismLapdRxRejectFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Received Reject Frames on a LAPD.
"
::= { vismLapdStatsEntry 22 }
vismLapdTxRejectFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Reject frames transmitted on LAPD.
"
::= { vismLapdStatsEntry 23 }
vismLapdRxInvalidFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter contains Invalid frames received on a LAPD.
"
::= { vismLapdStatsEntry 24 }
-- vismLapdDlcTable
vismLapdDlcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismLapdDlcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for maintaining the link state
of different DLCs on a LAPD channel. An entry of
this table will be implicitly created when a LAPD
entry is added.
"
::= { vismLapdGrp 3 }
vismLapdDlcEntry OBJECT-TYPE
SYNTAX VismLapdDlcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for vismLapdDlcTable."
INDEX { vismLapdDlcIndex, vismLapdDlcSapi, vismLapdDlcTei }
::= { vismLapdDlcTable 1 }
VismLapdDlcEntry ::=
SEQUENCE {
vismLapdDlcIndex Integer32,
vismLapdDlcSapi Integer32,
vismLapdDlcTei Integer32,
vismLapdDlcLinkState INTEGER
}
vismLapdDlcIndex OBJECT-TYPE
SYNTAX Integer32(1..248)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the corresponding LAPD index. It
is the same as vismLapdIndex.
"
::= { vismLapdDlcEntry 1 }
vismLapdDlcSapi OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the SAPI(Service Access Point Identifier)
of a specific DLC(Data Link Control).
"
::= { vismLapdDlcEntry 2 }
vismLapdDlcTei OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the TEI(Terminal Endpoint Identifier) of
a specific DLC.
"
::= { vismLapdDlcEntry 3 }
vismLapdDlcLinkState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicate the linking state on a given DLC.
"
::= { vismLapdDlcEntry 4 }
-- *****************************************************************
-- LAPD Trunk group notification
-- *****************************************************************
vismLapdTrunkNotificationPrefix OBJECT IDENTIFIER ::=
{ ciscoWanLapdTrunkMIB 2 }
vismLapdTrunkNotifications OBJECT IDENTIFIER ::=
{ vismLapdTrunkNotificationPrefix 0 }
-- **********************************************************************
-- Conformance
-- **********************************************************************
--
-- conformance information
--
vismLapdTrunkMIBConformance OBJECT IDENTIFIER ::=
{ ciscoWanLapdTrunkMIB 3 }
vismLapdTrunkMIBCompliances OBJECT IDENTIFIER ::=
{ vismLapdTrunkMIBConformance 1 }
vismLapdTrunkMIBGroups OBJECT IDENTIFIER ::=
{ vismLapdTrunkMIBConformance 2 }
--
-- Conformance and compliance statements statements
--
vismLapdTrunkMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
" The complaince statement for LAPD Trunk group
which implements vismLapdTrunkGrp MIB."
MODULE -- this module
MANDATORY-GROUPS {
vismLapdTrunkGroup,
ciscoVismLapdGroup,
ciscoVismLapdStatsGroup,
ciscoVismLapdDlcTable
}
OBJECT vismLapdRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.
"
::= { vismLapdTrunkMIBCompliances 1 }
--
-- units of conformance
--
-- MIB Groups
--
vismLapdTrunkGroup OBJECT-GROUP
OBJECTS {
vismLapdTrunkState,
vismLapdTrunkRudpIndex,
vismLapdTrunkRowStatus
}
STATUS current
DESCRIPTION
"This group contains objects related to configuration of
LAPD Trunk connections over RUDP.
"
::= { vismLapdTrunkMIBGroups 1 }
ciscoVismLapdGroup OBJECT-GROUP
OBJECTS {
vismLapdIndex,
vismLapdAppType,
vismLapdWinSize,
vismLapdN200,
vismLapdT200,
vismLapdT203,
vismLapdType,
vismLapdRowStatus,
vismLapdSide,
vismLapdTrunkType
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
VISM LAPD information."
::= { vismLapdTrunkMIBGroups 2 }
ciscoVismLapdStatsGroup OBJECT-GROUP
OBJECTS {
vismLapdStatsIndex,
vismLapdRxInfoFrames,
vismLapdTxInfoFrames,
vismLapdRxReadyFrames,
vismLapdTxReadyFrames,
vismLapdRxNotReadyFrames,
vismLapdTxNotReadyFrames,
vismLapdRxSABMFrames,
vismLapdTxSABMFrames,
vismLapdRxDisconFrames,
vismLapdTxDisconFrames,
vismLapdRxUAFrames,
vismLapdTxUAFrames,
vismLapdRxDiscModeFrames,
vismLapdTxDiscModeFrames,
vismLapdRxFrmRejectFrames,
vismLapdTxFrmRejectFrames,
vismLapdRxExchIdFrames,
vismLapdTxExchIdFrames,
vismLapdRxUnumInfoFrames,
vismLapdTxUnumInfoFrames,
vismLapdRxRejectFrames,
vismLapdTxRejectFrames,
vismLapdRxInvalidFrames
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
VISM LAPD Statistics information."
::= { vismLapdTrunkMIBGroups 3 }
ciscoVismLapdDlcTable OBJECT-GROUP
OBJECTS {
vismLapdDlcIndex,
vismLapdDlcSapi,
vismLapdDlcTei,
vismLapdDlcLinkState
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
VISM LAPD link State of different DLCs on a LAPD channel."
::= { vismLapdTrunkMIBGroups 4 }
END