initial commit; version 22.5.12042
This commit is contained in:
581
mibs/cisco/CISCO-VOICE-TONE-CADENCE-MIB
Normal file
581
mibs/cisco/CISCO-VOICE-TONE-CADENCE-MIB
Normal file
@ -0,0 +1,581 @@
|
||||
-- *****************************************************************
|
||||
-- CISCO-VOICE-TONE-CADENCE-MIB: Programmable Tones of media gateway.
|
||||
--
|
||||
-- May, 2003 Margaret Hsieh
|
||||
--
|
||||
-- Copyright (c) 2003 by cisco Systems, Inc.
|
||||
-- All rights reserved.
|
||||
-- *****************************************************************
|
||||
CISCO-VOICE-TONE-CADENCE-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY,
|
||||
OBJECT-TYPE,
|
||||
Unsigned32, Gauge32
|
||||
FROM SNMPv2-SMI
|
||||
RowStatus, StorageType, TEXTUAL-CONVENTION
|
||||
FROM SNMPv2-TC
|
||||
SnmpAdminString
|
||||
FROM SNMP-FRAMEWORK-MIB
|
||||
MODULE-COMPLIANCE,
|
||||
OBJECT-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
cmgwIndex, CVoiceTonePlanIndex
|
||||
FROM CISCO-MEDIA-GATEWAY-MIB
|
||||
CountryCode
|
||||
FROM CISCO-TC
|
||||
ciscoMgmt
|
||||
FROM CISCO-SMI;
|
||||
|
||||
ciscoVoiceToneCadenceMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "200305280000Z"
|
||||
ORGANIZATION "Cisco Systems, Inc."
|
||||
CONTACT-INFO
|
||||
" Cisco Systems
|
||||
Customer Service
|
||||
Postal: 170 W. Tasman Drive
|
||||
San Jose, CA 95134
|
||||
USA
|
||||
Tel: +1 800 553-NETS
|
||||
E-mail: cs-voice-gateway@cisco.com"
|
||||
DESCRIPTION
|
||||
"The MIB defines the attributes of the programmable
|
||||
tones specified in ITU-T E.180 Supplement 2.
|
||||
|
||||
Each country has its own regulation to the generation
|
||||
and detection of the call progressing
|
||||
tones such as dial tone, busy tone, ring back tone.
|
||||
The tone attributes are programmable, for example
|
||||
frequency, amplitude, cadence and duration of the
|
||||
tone."
|
||||
REVISION "200305280000Z"
|
||||
DESCRIPTION
|
||||
"Initial version of the MIB."
|
||||
::= { ciscoMgmt 356 }
|
||||
|
||||
ciscoVoiceToneCadenceMIBNotifs
|
||||
OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIB 0 }
|
||||
ciscoVoiceToneCadenceMIBObjects
|
||||
OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIB 1 }
|
||||
|
||||
cVoiceToneCadenceConfig
|
||||
OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIBObjects 1 }
|
||||
|
||||
-- *********************************************************************
|
||||
-- TEXTUAL CONVENTIONS
|
||||
-- *********************************************************************
|
||||
|
||||
CToneFrequency ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This Textual Convention defines frequency of the
|
||||
programmable tone to be played or detected.
|
||||
|
||||
The format of frequency of the programmable tone is
|
||||
based on ITU E.180 Supplement 2. The frequency octet string
|
||||
is a combination of Frequency Expression, frequency
|
||||
conjuncture and frequency delimiter.
|
||||
|
||||
Frequency Expression - The frequency expression is a single
|
||||
numeric value or a string of numeric values with the
|
||||
notation '+' or '/'. The numeric values are the
|
||||
frequency's decimal values in Hz.
|
||||
|
||||
'+' - frequency conjuncture. The Frequency Expression to the
|
||||
left and to the right of this notation are emitted
|
||||
simultaneously.
|
||||
|
||||
'/' - frequency delimiter. The Frequency Expression to the
|
||||
left of this notation is emitted before the Frequency
|
||||
Expression to the right.
|
||||
|
||||
For example, the Payphone Recognition Tone of Australia is
|
||||
'1100+1750/750+1450', which means frequency 1100Hz and 1750Hz
|
||||
are emitted simultaneously, stopped for a period of time,
|
||||
followed by the simultaneously emission of 750Hz and 1450Hz.
|
||||
"
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2 - Various Tones Used In National
|
||||
Network."
|
||||
SYNTAX OCTET STRING (SIZE(1..64))
|
||||
|
||||
CToneAmplitude ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This Textual Convention defines amplitude expression of the
|
||||
programmable tone to be played or detected.
|
||||
|
||||
This textual convention is a combination of Amplitude
|
||||
Expression, Amplitude conjuncture and Amplitude delimiter.
|
||||
|
||||
Amplitude Expression - The amplitude expression is a single
|
||||
numeric value or a string of numeric values with the
|
||||
notation '+' or '/'. The numeric values are the
|
||||
amplitude's decimal values in dBm. The numeric values
|
||||
are usually negative.
|
||||
|
||||
'+' - Amplitude conjuncture. The Amplitude Expression to the
|
||||
left and to the right of this notation are emitted
|
||||
simultaneously.
|
||||
The Amplitude Expression preceded this notation
|
||||
is the amplitude expression of the Frequency Expression
|
||||
preceded '+'.
|
||||
The Amplitude Expression followed this notation
|
||||
is the amplitude expression of the Frequency Expression
|
||||
followed '+'.
|
||||
|
||||
'/' - Amplitude delimiter. The Amplitude Expression to the
|
||||
left of this notation is emitted before the Amplitude
|
||||
Expression to the right.
|
||||
The Amplitude Expression preceded this notation
|
||||
is the amplitude expression of the Frequency Expression
|
||||
preceded '/'.
|
||||
The Amplitude Expression followed this notation
|
||||
is the amplitude expression of the Frequency Expression
|
||||
followed '/'.
|
||||
|
||||
For example, the amplitude of USA Recall Dial Tone is
|
||||
'-10+-10' and the frequency is '350+440'.
|
||||
It means amplitude of the both frequencies 350Hz and 440Hz
|
||||
are emitted simultaneously, each with amplitude expression
|
||||
-10 dBm."
|
||||
REFERENCE
|
||||
"ITU E.180/Q.35 - Technical Characteristic of Tones for the
|
||||
Telephone Service."
|
||||
SYNTAX OCTET STRING (SIZE(2..64))
|
||||
|
||||
CToneCadence ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This Textual Convention defines cadence of the programmable
|
||||
tone to be played or detected.
|
||||
|
||||
The format of cadence of the programmable tone is
|
||||
based on ITU E.180 Supplement 2.
|
||||
|
||||
Cadence string consists of cadence units, digits, keywords
|
||||
and special characters. Cadence Units are digits where each
|
||||
unit is one second.
|
||||
No space is allowed in the cadence string.
|
||||
The keywords are 'on', 'off', 'CYCLES' and 'CONTINUOUS'.
|
||||
The special characters are '-', '*', '(', ')' and ','.
|
||||
|
||||
'on' - The number preceded this keyword is the duration of
|
||||
emission in second.
|
||||
'off' - The number preceded this keyword is the duration of
|
||||
absence in second.
|
||||
'CONTINUOUS' - The frequencies are sent out and stayed on
|
||||
indefinitely.
|
||||
An on-off Period is either the keyword 'CONTINUOUS' or a
|
||||
Cadence Unit followed by the keyword 'ON' or 'OFF'.
|
||||
|
||||
'-' - Separator. It separates multiple on-off Periods.
|
||||
|
||||
A Cadence List is a sequence of on-off Periods separated by
|
||||
the special character '-'.
|
||||
|
||||
'CYCLES' - When preceded by special character ',' and a
|
||||
number X, the Cadence List before the special
|
||||
character ',' is repeated X times.
|
||||
|
||||
Cadence List - The parentheses are delimiters. It is used
|
||||
for the repetition. The entire Cadence List in the
|
||||
parentheses is to be repeated. Without the delimiter,
|
||||
only the first On-off Period is repeated.
|
||||
|
||||
'*' - Repetition. When preceded by a number X, the On-off
|
||||
Period or the parenthesized Cadence List is to be
|
||||
repeated X times.
|
||||
|
||||
',' - Terminator. It terminates a Cadence List and announces
|
||||
the presence of the keyword, 'CYCLES'. When followed by
|
||||
a number X and then the keyword 'CYCLES', the preceded
|
||||
Cadence List is repeated X times
|
||||
|
||||
For example, in United States, the cadence of confirmation
|
||||
tone is '3*100on-2*100off', the cadence of dial tone is
|
||||
'3*(100on-100off)-CONTINUOUS'.
|
||||
In United Kingdom, the cadence of payphone tone is
|
||||
'200on-200off-200on-200off'.
|
||||
Any thing other then the above notation is not supported.
|
||||
"
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2 - Various Tones Used In National
|
||||
Network."
|
||||
SYNTAX OCTET STRING (SIZE(3..64))
|
||||
|
||||
|
||||
--**********************************************************************
|
||||
-- Tone Plan Table
|
||||
--**********************************************************************
|
||||
cvtcTonePlanTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CvtcTonePlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains the configuration of tone plans
|
||||
for the programmable tones in different countries."
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2 - Various Tones Used In National
|
||||
Network."
|
||||
::= { cVoiceToneCadenceConfig 1 }
|
||||
|
||||
cvtcTonePlanEntry OBJECT-TYPE
|
||||
SYNTAX CvtcTonePlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry represents one tone plan which defines attributes
|
||||
of the programmable tones for a country.
|
||||
Each country can have more than one tone plans with
|
||||
different version. Each entry should have the unique
|
||||
combination of cvtcTonePlanCountry and cvtcTonePlanVersion.
|
||||
|
||||
There are some system built-in tone plans. The built-in
|
||||
tone plans will be populated by the system automatically
|
||||
at the system start-up. They can not be created, deleted or
|
||||
modified by user.
|
||||
|
||||
When an entry is created, the following objects must be
|
||||
provided:
|
||||
cvtcTonePlanCountry,
|
||||
cvtcTonePlanVersion,
|
||||
cvtcTonePlanFileName
|
||||
|
||||
When an entry is active, it can not be modified.
|
||||
A system built-in tone plan can not be deleted. Only the
|
||||
entries added by user can be deleted."
|
||||
INDEX { cmgwIndex, cvtcTonePlanId }
|
||||
::= { cvtcTonePlanTable 1 }
|
||||
|
||||
CvtcTonePlanEntry ::= SEQUENCE
|
||||
{
|
||||
cvtcTonePlanId CVoiceTonePlanIndex,
|
||||
cvtcTonePlanVifCount Gauge32,
|
||||
cvtcTonePlanCountry CountryCode,
|
||||
cvtcTonePlanVersion Unsigned32,
|
||||
cvtcTonePlanFileName SnmpAdminString,
|
||||
cvtcTonePlanStorageType StorageType,
|
||||
cvtcTonePlanRowStatus RowStatus
|
||||
}
|
||||
|
||||
cvtcTonePlanId OBJECT-TYPE
|
||||
SYNTAX CVoiceTonePlanIndex
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object uniquely identifies the tone plan in the table."
|
||||
::= { cvtcTonePlanEntry 1 }
|
||||
|
||||
cvtcTonePlanVifCount OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the number of voice interfaces are
|
||||
using the tone plan."
|
||||
::= { cvtcTonePlanEntry 2 }
|
||||
|
||||
cvtcTonePlanCountry OBJECT-TYPE
|
||||
SYNTAX CountryCode
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the country code (defined in ISO-3166)
|
||||
of the country that the tone plan is used for.
|
||||
|
||||
The country specified by the country code should be registered
|
||||
in ITU E.180 Supplement 2.
|
||||
|
||||
Any other entry in this table may have the identical
|
||||
country code, but the combination of cvtcTonePlanCountry and
|
||||
cvtcTonePlanVersion must be unique."
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2.
|
||||
ISO-3166 Country Code. "
|
||||
::= { cvtcTonePlanEntry 3 }
|
||||
|
||||
cvtcTonePlanVersion OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (0..100)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the version of the tone plan for
|
||||
a country. One country may have many tone plans,
|
||||
therefore they may have the same country name, but the
|
||||
combination of cvtcTonePlanCountry and cvtcTonePlanVersion
|
||||
must be unique."
|
||||
::= { cvtcTonePlanEntry 4 }
|
||||
|
||||
cvtcTonePlanFileName OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE (1..64))
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the valid file name stored on
|
||||
the media gateway's harddisk.
|
||||
The tone plan file can be transferred to the media gateway
|
||||
via FTP text file transfer mechanism.
|
||||
When creating a conceptual row, the tone plan file must
|
||||
be transferred to the media gateway already.
|
||||
|
||||
If the entry is a built-in tone plan predefined in system,
|
||||
then this object will have the value of 'BUILT-IN'.
|
||||
Other provision-able tone plan files are not allowed to have
|
||||
the string 'BUILT-IN' as their names."
|
||||
::= { cvtcTonePlanEntry 5 }
|
||||
|
||||
cvtcTonePlanStorageType OBJECT-TYPE
|
||||
SYNTAX StorageType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the storage type for this conceptual
|
||||
row. If this conceptual row represents a system built-in
|
||||
tone plan, the value of this object is readOnly (5).
|
||||
If this conceptual row represents an user defined tone
|
||||
plan, the value of this object is nonVolatile (3).
|
||||
|
||||
The built-in tone plans will be added by the system
|
||||
automatically at the system start-up. They can not be
|
||||
added, deleted or modified by user."
|
||||
::= { cvtcTonePlanEntry 6 }
|
||||
|
||||
cvtcTonePlanRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The entries for The system built-in tone plans will be
|
||||
added by the system at start-up, they can not be added,
|
||||
modified or deleted by user."
|
||||
::= { cvtcTonePlanEntry 7 }
|
||||
|
||||
--*********************************************************************
|
||||
-- Tone ID Table
|
||||
--*********************************************************************
|
||||
cvtcToneIdTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CvtcToneIdEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains the identification of the
|
||||
programmable tones."
|
||||
::= { cVoiceToneCadenceConfig 2 }
|
||||
|
||||
cvtcToneIdEntry OBJECT-TYPE
|
||||
SYNTAX CvtcToneIdEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry represents the identification for
|
||||
one programmable tone in a tone plan."
|
||||
INDEX { cmgwIndex, cvtcToneId }
|
||||
::= { cvtcToneIdTable 1 }
|
||||
|
||||
CvtcToneIdEntry ::= SEQUENCE
|
||||
{
|
||||
cvtcToneId Unsigned32,
|
||||
cvtcToneName SnmpAdminString,
|
||||
cvtcToneIdRowStatus RowStatus
|
||||
}
|
||||
|
||||
cvtcToneId OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (1..65535)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object uniquely identifies the programmable tone in
|
||||
a tone plan."
|
||||
::= { cvtcToneIdEntry 1 }
|
||||
|
||||
cvtcToneName OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE (1..64))
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specified the name of the programmable tone."
|
||||
::= { cvtcToneIdEntry 2 }
|
||||
|
||||
cvtcToneIdRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The entries for ITU defined tones will be added by the
|
||||
system at start-up."
|
||||
::= { cvtcToneIdEntry 3 }
|
||||
|
||||
--*********************************************************************
|
||||
-- Programmable Tone Table
|
||||
--*********************************************************************
|
||||
cvtcProgrammableToneTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CvtcProgrammableToneEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains the configurable attributes
|
||||
of the programmable tones for tone plan."
|
||||
::= { cVoiceToneCadenceConfig 3 }
|
||||
|
||||
cvtcProgrammableToneEntry OBJECT-TYPE
|
||||
SYNTAX CvtcProgrammableToneEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry represents the configurable attributes for
|
||||
one programmable tone in a tone plan.
|
||||
The tone attributes are specified in ITU E.180
|
||||
Supplement 2."
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2 - Various Tones Used In National
|
||||
Network."
|
||||
INDEX { cmgwIndex, cvtcTonePlanId, cvtcToneId }
|
||||
::= { cvtcProgrammableToneTable 1 }
|
||||
|
||||
CvtcProgrammableToneEntry ::= SEQUENCE
|
||||
{
|
||||
cvtcProgrammableToneFrequency CToneFrequency,
|
||||
cvtcProgrammableToneAmplitude CToneAmplitude,
|
||||
cvtcProgrammableToneCadence CToneCadence,
|
||||
cvtcProgrammableToneDuration Unsigned32,
|
||||
cvtcProgrammableToneStorageType StorageType,
|
||||
cvtcProgrammableToneRowStatus RowStatus
|
||||
}
|
||||
|
||||
cvtcProgrammableToneFrequency OBJECT-TYPE
|
||||
SYNTAX CToneFrequency
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specified the frequency of the tone
|
||||
to be played or detected."
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2 - Various Tones Used In National
|
||||
Network."
|
||||
::= { cvtcProgrammableToneEntry 1 }
|
||||
|
||||
cvtcProgrammableToneAmplitude OBJECT-TYPE
|
||||
SYNTAX CToneAmplitude
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specified the amplitude expression of the tone
|
||||
to be played or detected."
|
||||
REFERENCE
|
||||
"ITU E.180/Q.35 - Technical Characteristic of Tones for the
|
||||
Telephone Service."
|
||||
::= { cvtcProgrammableToneEntry 2 }
|
||||
|
||||
cvtcProgrammableToneCadence OBJECT-TYPE
|
||||
SYNTAX CToneCadence
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specified the cadence of the tone
|
||||
to be played or detected."
|
||||
REFERENCE
|
||||
"ITU E.180 Supplement 2 - Various Tones Used In National
|
||||
Network."
|
||||
::= { cvtcProgrammableToneEntry 3 }
|
||||
|
||||
cvtcProgrammableToneDuration OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (0..4294967295)
|
||||
UNITS "milliseconds"
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specified the duration of the tone
|
||||
will be played.
|
||||
The value of 0 indicates that the tone will be played
|
||||
infinitely unless interrupted."
|
||||
REFERENCE
|
||||
"ITU E.180/Q.35 - Technical Characteristic of Tones for the
|
||||
Telephone Service."
|
||||
::= { cvtcProgrammableToneEntry 4 }
|
||||
|
||||
cvtcProgrammableToneStorageType OBJECT-TYPE
|
||||
SYNTAX StorageType
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the storage type for this
|
||||
conceptual row. If this conceptual row represents
|
||||
a programmable tone in a system built-in tone plan,
|
||||
the value of this object is permanent (4).
|
||||
If this conceptual row represents a programmable tone
|
||||
in an user defined tone plan, the value of this object
|
||||
is nonVolatile (3).
|
||||
|
||||
If the value of this object is permanent (4),
|
||||
cvtcProgrammableToneDuration is the only object can be
|
||||
modified by the user."
|
||||
::= { cvtcProgrammableToneEntry 5 }
|
||||
|
||||
cvtcProgrammableToneRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is used to add, delete or modify the entry
|
||||
of the table.
|
||||
When an entry is created, the following objects have to
|
||||
be provided:
|
||||
cvtcProgrammableToneFrequency,
|
||||
cvtcProgrammableToneAmplitude,
|
||||
cvtcProgrammableToneCadence.
|
||||
"
|
||||
::= { cvtcProgrammableToneEntry 6 }
|
||||
|
||||
--***********************************************************************
|
||||
-- Conformance and compliance statements
|
||||
--***********************************************************************
|
||||
|
||||
ciscoVoiceToneCadenceMIBConform
|
||||
OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIB 3 }
|
||||
|
||||
cVoiceToneCadenceCompliances
|
||||
OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIBConform 1 }
|
||||
cVoiceToneCadenceGroups
|
||||
OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIBConform 2 }
|
||||
|
||||
-- compliance statements
|
||||
|
||||
cVoiceToneCadenceCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for entities which implement
|
||||
the CISCO-VOICE-TONE-CADENCE-MIB"
|
||||
MODULE -- compliance to this module
|
||||
MANDATORY-GROUPS {
|
||||
cvtcToneConfigGroup
|
||||
}
|
||||
::= { cVoiceToneCadenceCompliances 1 }
|
||||
|
||||
-- units of conformance
|
||||
|
||||
cvtcToneConfigGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
cvtcTonePlanVifCount,
|
||||
cvtcTonePlanCountry,
|
||||
cvtcTonePlanVersion,
|
||||
cvtcTonePlanFileName,
|
||||
cvtcTonePlanStorageType,
|
||||
cvtcTonePlanRowStatus,
|
||||
cvtcToneName,
|
||||
cvtcToneIdRowStatus,
|
||||
cvtcProgrammableToneFrequency,
|
||||
cvtcProgrammableToneAmplitude,
|
||||
cvtcProgrammableToneCadence,
|
||||
cvtcProgrammableToneDuration,
|
||||
cvtcProgrammableToneStorageType,
|
||||
cvtcProgrammableToneRowStatus
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The collection of objects providing programmable tones
|
||||
and tone plans. "
|
||||
::= { cVoiceToneCadenceGroups 1 }
|
||||
|
||||
END
|
||||
|
||||
Reference in New Issue
Block a user