initial commit; version 22.5.12042
This commit is contained in:
598
mibs/cisco/CISCO-CAR-MIB
Normal file
598
mibs/cisco/CISCO-CAR-MIB
Normal file
@ -0,0 +1,598 @@
|
||||
-- *****************************************************************
|
||||
-- Cisco Commited Access Rate MIB file.
|
||||
--
|
||||
-- August 1997, Shu Tai
|
||||
--
|
||||
-- Copyright (c) 1997-1999, 2000 by Cisco Systems, Inc.
|
||||
-- All rights reserved.
|
||||
--
|
||||
-- *****************************************************************
|
||||
-- $Endlog$
|
||||
--
|
||||
|
||||
CISCO-CAR-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY,
|
||||
OBJECT-TYPE,
|
||||
Integer32,
|
||||
Gauge32,
|
||||
Counter32,
|
||||
Counter64
|
||||
FROM SNMPv2-SMI
|
||||
MODULE-COMPLIANCE,
|
||||
OBJECT-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
TEXTUAL-CONVENTION
|
||||
FROM SNMPv2-TC
|
||||
ifIndex
|
||||
FROM IF-MIB
|
||||
ciscoMgmt
|
||||
FROM CISCO-SMI;
|
||||
|
||||
ciscoCarMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "0002180000Z"
|
||||
ORGANIZATION "Cisco Systems, Inc."
|
||||
CONTACT-INFO
|
||||
" Cisco Systems
|
||||
Customer Service
|
||||
|
||||
Postal: 170 W. Tasman Drive
|
||||
San Jose, CA 95134-1706
|
||||
USA
|
||||
|
||||
Tel: +1 800 553-NETS
|
||||
|
||||
E-mail: cs-qos@cisco.com"
|
||||
|
||||
DESCRIPTION
|
||||
"Cisco CAR MIB - Overview
|
||||
|
||||
Cisco Weighted Rate-limit, known as Commited Access Rate (CAR),
|
||||
is a traffic control method which uses a set of rate limits
|
||||
to be applied to an interface for packet switching purpose.
|
||||
Each rate limit has a configurable action to be taken
|
||||
when a condition suffices.
|
||||
|
||||
This MIB incorporates objects from the Cisco Rate-limit line interfaces.
|
||||
Its purpose is to provide Weighted Rate-Limit packet filtering information.
|
||||
"
|
||||
|
||||
REVISION "9707180000Z"
|
||||
DESCRIPTION
|
||||
"Initial version of this MIB module."
|
||||
REVISION "0002180000Z"
|
||||
DESCRIPTION
|
||||
"Added 32-bit overflow counters, as well as
|
||||
64-bit counters for both switched and filtered
|
||||
bytes and packet counts to the statistics table
|
||||
(ccarStatTable)."
|
||||
::= { ciscoMgmt 113 }
|
||||
|
||||
ciscoCarMIBObjects OBJECT IDENTIFIER ::= { ciscoCarMIB 1 }
|
||||
|
||||
-- Subgroups:
|
||||
-- Rate-limit
|
||||
--
|
||||
|
||||
ccarConfigs OBJECT IDENTIFIER ::= { ciscoCarMIBObjects 1 }
|
||||
ccarStats OBJECT IDENTIFIER ::= { ciscoCarMIBObjects 2 }
|
||||
|
||||
-- Textual Conventions
|
||||
|
||||
PacketSource ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The source of the packet rate-limited for.
|
||||
|
||||
input statistics of the input packets.
|
||||
output statistics of the output packets.
|
||||
"
|
||||
SYNTAX INTEGER { input(1), output(2) }
|
||||
|
||||
RateLimitType ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The type of traffic rate-limited for.
|
||||
|
||||
all all traffic.
|
||||
quickAcc traffic matches rate-limit's access list.
|
||||
standardAcc traffic matches standard access list.
|
||||
"
|
||||
SYNTAX INTEGER { all(1), quickAcc(2), standardAcc(3) }
|
||||
|
||||
RateLimitAction ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The action taken after evaluating the rate limit.
|
||||
|
||||
drop drop the packet.
|
||||
xmit transmit the packet.
|
||||
continue continue to evaluate to the subsequent
|
||||
rate limits.
|
||||
precedXmit rewrite the IP precedence and transmit
|
||||
the packet.
|
||||
precedCont rewrite the IP precedence and allow it
|
||||
evaluated by subsequent rate limits.
|
||||
"
|
||||
|
||||
SYNTAX INTEGER { drop(1), xmit(2), continue(3),
|
||||
precedXmit(4), precedCont(5) }
|
||||
|
||||
ccarConfigTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CcarConfigEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table of rate limit configuration entries.
|
||||
Rate Limit is a method of traffic control. It allows a set
|
||||
of rate limits to be configured and applied to packets flowing
|
||||
into/out of an interface to regulate network traffic."
|
||||
|
||||
::= { ccarConfigs 1 }
|
||||
|
||||
ccarConfigEntry OBJECT-TYPE
|
||||
SYNTAX CcarConfigEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of rate-limit configuration objects on this
|
||||
interface. Entries in the ccarConfigTable is created
|
||||
and deleted via the rate-limit command line interface."
|
||||
|
||||
INDEX { ifIndex, ccarConfigDirection, ccarConfigRowIndex }
|
||||
::= { ccarConfigTable 1 }
|
||||
|
||||
CcarConfigEntry ::=
|
||||
SEQUENCE {
|
||||
ccarConfigDirection
|
||||
PacketSource,
|
||||
ccarConfigRowIndex
|
||||
Integer32,
|
||||
ccarConfigType
|
||||
RateLimitType,
|
||||
ccarConfigAccIdx
|
||||
Integer32,
|
||||
ccarConfigRate
|
||||
Integer32,
|
||||
ccarConfigLimit
|
||||
Integer32,
|
||||
ccarConfigExtLimit
|
||||
Integer32,
|
||||
ccarConfigConformAction
|
||||
RateLimitAction,
|
||||
ccarConfigExceedAction
|
||||
RateLimitAction
|
||||
}
|
||||
|
||||
ccarConfigDirection OBJECT-TYPE
|
||||
SYNTAX PacketSource
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The data source for the Rate Limit object."
|
||||
::= { ccarConfigEntry 1 }
|
||||
|
||||
ccarConfigRowIndex OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..2147483647)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An arbitrary index for rate limit objects.
|
||||
It will increase as the list is traversed,
|
||||
but may skip."
|
||||
|
||||
::= { ccarConfigEntry 2 }
|
||||
|
||||
ccarConfigType OBJECT-TYPE
|
||||
SYNTAX RateLimitType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The type of traffic rate-limited against."
|
||||
|
||||
::= { ccarConfigEntry 3 }
|
||||
|
||||
ccarConfigAccIdx OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The index to the access list if RateLimitType is either
|
||||
quickAcc or standardAcc."
|
||||
|
||||
::= { ccarConfigEntry 4 }
|
||||
|
||||
ccarConfigRate OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "bits/second"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The comitted access rate. This is the sustained
|
||||
rate permitted by the rate limit."
|
||||
|
||||
::= { ccarConfigEntry 5 }
|
||||
|
||||
ccarConfigLimit OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The rate limit. The amout of traffic, in bytes,
|
||||
in excess of the committed access rate which will be
|
||||
instantaneously permitted by the rate limit."
|
||||
|
||||
::= { ccarConfigEntry 6 }
|
||||
|
||||
ccarConfigExtLimit OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The extended burst limit. The amount of traffic,
|
||||
in bytes, in excess of the burst limit which may be
|
||||
conditionnally permitted by the rate limit.
|
||||
The probability that the traffic is not permitted
|
||||
increases as the received burst increases.
|
||||
|
||||
P(not permitted) =
|
||||
(BurstRate - ConfLimit) / (ConfLimitExt - ConfLimit)."
|
||||
|
||||
::= { ccarConfigEntry 7 }
|
||||
|
||||
ccarConfigConformAction OBJECT-TYPE
|
||||
SYNTAX RateLimitAction
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Action to be taken when the traffic is within
|
||||
the Rate Limit."
|
||||
|
||||
::= { ccarConfigEntry 8 }
|
||||
|
||||
ccarConfigExceedAction OBJECT-TYPE
|
||||
SYNTAX RateLimitAction
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Action to be taken when the traffic exceeds
|
||||
the Rate Limit."
|
||||
|
||||
::= { ccarConfigEntry 9 }
|
||||
|
||||
-- end of ccarConfigTable
|
||||
|
||||
ccarStatTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CcarStatEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table of rate limit status entries."
|
||||
|
||||
::= { ccarStats 1 }
|
||||
|
||||
ccarStatEntry OBJECT-TYPE
|
||||
SYNTAX CcarStatEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of rate-limit status objects on this
|
||||
interface. Entries are created and deleted via
|
||||
the rate-limit command line interface."
|
||||
|
||||
AUGMENTS { ccarConfigEntry }
|
||||
::= { ccarStatTable 1 }
|
||||
|
||||
CcarStatEntry ::=
|
||||
SEQUENCE {
|
||||
ccarStatSwitchedPkts
|
||||
Counter32,
|
||||
ccarStatSwitchedBytes
|
||||
Counter32,
|
||||
ccarStatFilteredPkts
|
||||
Counter32,
|
||||
ccarStatFilteredBytes
|
||||
Counter32,
|
||||
ccarStatCurBurst
|
||||
Gauge32,
|
||||
ccarStatSwitchedPktsOverflow
|
||||
Counter32,
|
||||
ccarStatSwitchedBytesOverflow
|
||||
Counter32,
|
||||
ccarStatFilteredPktsOverflow
|
||||
Counter32,
|
||||
ccarStatFilteredBytesOverflow
|
||||
Counter32,
|
||||
ccarStatHCSwitchedPkts
|
||||
Counter64,
|
||||
ccarStatHCSwitchedBytes
|
||||
Counter64,
|
||||
ccarStatHCFilteredPkts
|
||||
Counter64,
|
||||
ccarStatHCFilteredBytes
|
||||
Counter64
|
||||
}
|
||||
|
||||
ccarStatSwitchedPkts OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "packets"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of packets permitted by this rate limit."
|
||||
|
||||
::= { ccarStatEntry 1 }
|
||||
|
||||
ccarStatSwitchedBytes OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of bytes permitted by this interface."
|
||||
|
||||
::= { ccarStatEntry 2 }
|
||||
|
||||
ccarStatFilteredPkts OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "packets"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of packets which exceeded this rate limit."
|
||||
|
||||
::= { ccarStatEntry 3 }
|
||||
|
||||
ccarStatFilteredBytes OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of bytes which exceeded this rate limit."
|
||||
|
||||
::= { ccarStatEntry 4 }
|
||||
|
||||
ccarStatCurBurst OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current received burst size."
|
||||
::= { ccarStatEntry 5 }
|
||||
|
||||
ccarStatSwitchedPktsOverflow OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "packets"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The high-word of the counter of packets permitted
|
||||
by this rate limit.
|
||||
|
||||
NOTE: The object ccarStatSwitchedPkts contains the
|
||||
lower 32 bits of the switched packet counts.
|
||||
If the number of switched packets is larger
|
||||
than what can be stored in a 32 bit value, then
|
||||
the high word value is stored in this object.
|
||||
As such SNMP Manager applications should
|
||||
combine this object along with the
|
||||
ccarStatSwitchedPkts object to come up with the
|
||||
64-bit value.
|
||||
|
||||
SNMP v2c or v3 Manager can use the
|
||||
ccarStatHCSwitchedPkts object directly
|
||||
(which is a 64-bit object)."
|
||||
|
||||
::= { ccarStatEntry 6 }
|
||||
|
||||
ccarStatSwitchedBytesOverflow OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The high-word of the counter of bytes permitted by
|
||||
this interface.
|
||||
|
||||
NOTE: The object ccarStatSwitchedBytes contains the
|
||||
lower 32 bits of the switched byte counts.
|
||||
If the number of switched bytes is larger
|
||||
than what can be stored in a 32 bit value, then
|
||||
the high word value is stored in this object.
|
||||
As such SNMP Manager applications should
|
||||
combine this object along with the
|
||||
ccarStatSwitchedBytes object to come up with the
|
||||
64-bit value.
|
||||
|
||||
SNMP v2c or v3 Manager can use the
|
||||
ccarStatHCSwitchedBytes object directly
|
||||
(which is a 64-bit object)."
|
||||
|
||||
::= { ccarStatEntry 7 }
|
||||
|
||||
ccarStatFilteredPktsOverflow OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "packets"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The high-word of the counter of packets which exceeded
|
||||
this rate limit.
|
||||
|
||||
NOTE: The object ccarStatFilteredPkts contains the
|
||||
lower 32 bits of the filtered packet counts.
|
||||
If the number of filtered packets is larger
|
||||
than what can be stored in a 32 bit value, then
|
||||
the high word value is stored in this object.
|
||||
As such SNMP Manager applications should combine
|
||||
this object along with the ccarStatFilteredPkts
|
||||
object to come up with the 64-bit value.
|
||||
|
||||
SNMP v2c or v3 Manager can use the
|
||||
ccarStatHCFilteredPkts object directly
|
||||
(which is a 64-bit object)."
|
||||
|
||||
::= { ccarStatEntry 8 }
|
||||
|
||||
ccarStatFilteredBytesOverflow OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The high-word of the counter of bytes which exceeded
|
||||
this rate limit.
|
||||
|
||||
NOTE: The object ccarStatFilteredBytes contains the
|
||||
lower 32 bits of the filtered byte counts.
|
||||
If the number of filtered bytes is larger
|
||||
than what can be stored in a 32 bit value, then
|
||||
the high word value is stored in this object.
|
||||
As such SNMP Manager applications should combine
|
||||
this object along with the ccarStatFilteredBytes
|
||||
object to come up with the 64-bit value.
|
||||
|
||||
SNMP v2c or v3 Manager can use the
|
||||
ccarStatHCFilteredBytes object directly
|
||||
(which is a 64-bit object)."
|
||||
|
||||
::= { ccarStatEntry 9 }
|
||||
|
||||
|
||||
|
||||
ccarStatHCSwitchedPkts OBJECT-TYPE
|
||||
SYNTAX Counter64
|
||||
UNITS "packets"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of packets permitted by this rate limit.
|
||||
|
||||
NOTE: This is a 64 bit (High Capacity)
|
||||
version of the ccarStatSwitchedPkts
|
||||
counter for use with SNMP v2c or v3 Managers"
|
||||
|
||||
::= { ccarStatEntry 10 }
|
||||
|
||||
ccarStatHCSwitchedBytes OBJECT-TYPE
|
||||
SYNTAX Counter64
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of bytes permitted by this interface.
|
||||
|
||||
NOTE: This is a 64 bit (High Capacity)
|
||||
version of the ccarStatSwitchedBytes
|
||||
counter for use with SNMP v2c or v3 Managers"
|
||||
|
||||
::= { ccarStatEntry 11 }
|
||||
|
||||
ccarStatHCFilteredPkts OBJECT-TYPE
|
||||
SYNTAX Counter64
|
||||
UNITS "packets"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of packets which exceeded this rate limit.
|
||||
|
||||
NOTE: This is a 64 bit (High Capacity)
|
||||
version of the ccarStatFilteredPkts
|
||||
counter for use with SNMP v2c or v3 Managers"
|
||||
|
||||
::= { ccarStatEntry 12 }
|
||||
|
||||
ccarStatHCFilteredBytes OBJECT-TYPE
|
||||
SYNTAX Counter64
|
||||
UNITS "bytes"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The counter of bytes which exceeded this rate limit.
|
||||
|
||||
NOTE: This is a 64 bit (High Capacity)
|
||||
version of the ccarStatFilteredBytes
|
||||
counter for use with SNMP v2c or v3 Managers"
|
||||
|
||||
::= { ccarStatEntry 13 }
|
||||
|
||||
|
||||
|
||||
-- end of ccarStatTable
|
||||
|
||||
-- conformance information
|
||||
|
||||
ciscoCarMIBConformance OBJECT IDENTIFIER ::= { ciscoCarMIB 3 }
|
||||
ciscoCarMIBCompliances OBJECT IDENTIFIER ::= { ciscoCarMIBConformance 1 }
|
||||
ciscoCarMIBGroups OBJECT IDENTIFIER ::= { ciscoCarMIBConformance 2 }
|
||||
|
||||
|
||||
-- compliance statement
|
||||
|
||||
ciscoCarMIBCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for entities which implement
|
||||
the CAR on a Cisco router."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS { ciscoCarMIBGroup }
|
||||
::= { ciscoCarMIBCompliances 1 }
|
||||
|
||||
ciscoCarMIBComplianceHCCounters MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for entities that implement
|
||||
64-bit counters for Switched/Filtered Packet/Bytes objects
|
||||
for CAR on a Cisco router."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS {
|
||||
ciscoCarMIBGroup,
|
||||
ciscoCarMIBHCGroup
|
||||
}
|
||||
::= { ciscoCarMIBCompliances 2 }
|
||||
|
||||
-- units of conformance
|
||||
|
||||
ciscoCarMIBGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ccarConfigType,
|
||||
ccarConfigAccIdx,
|
||||
ccarConfigRate,
|
||||
ccarConfigLimit,
|
||||
ccarConfigExtLimit,
|
||||
ccarConfigConformAction,
|
||||
ccarConfigExceedAction,
|
||||
ccarStatSwitchedPkts,
|
||||
ccarStatSwitchedBytes,
|
||||
ccarStatFilteredPkts,
|
||||
ccarStatFilteredBytes,
|
||||
ccarStatCurBurst
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects providing CAR monitoring."
|
||||
::= { ciscoCarMIBGroups 1 }
|
||||
|
||||
ciscoCarMIBHCGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
ccarStatSwitchedPktsOverflow,
|
||||
ccarStatSwitchedBytesOverflow,
|
||||
ccarStatFilteredPktsOverflow,
|
||||
ccarStatFilteredBytesOverflow,
|
||||
ccarStatHCSwitchedPkts,
|
||||
ccarStatHCSwitchedBytes,
|
||||
ccarStatHCFilteredPkts,
|
||||
ccarStatHCFilteredBytes
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of high capacity counters (64-bit) provided
|
||||
for CAR monitoring."
|
||||
::= { ciscoCarMIBGroups 2 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user