WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

557
mibs/cisco/CISCO-ATM-SWITCH-FR-RM-MIB Normal file
View File

@ -0,0 +1,557 @@
-- *****************************************************************
-- CISCO-ATM-SWITCH-FR-IWF-MIB
--
-- Sept 1998, Gautam Banerjee
--
-- Copyright (c) 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-ATM-SWITCH-FR-RM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Gauge32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION,TruthValue FROM SNMPv2-TC
ifIndex FROM RFC1213-MIB
ciscoMgmt FROM CISCO-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
ciscoAtmSwitchFrRmMIB MODULE-IDENTITY
LAST-UPDATED "9807200000Z"
ORGANIZATION "Cisco Systems"
CONTACT-INFO "
Cisco Systems
Customer Service
Postal: 170 West Tasman Drive
San Jose CA 95134
USA
Phone: +1 800 553-NETS
Email: cs-atm@cisco.com"
DESCRIPTION
"This MIB module describes a set of objects used
for switch Resource Management (RM) for Frame Relay/Frame
based User-to-Network (FUNI) to ATM interworking
function (IWF) connections. Please refer to the Frame
Relay Forum documents FRF.5 and FRF.8 for details on the
Frame Relay to ATM Interworking Functions. For details
on FUNI, please refer to the ATM Forum FUNI Specification
document.
These objects are applicable to Frame Relay and FUNI
interfaces present on the Frame Relay Port Adapter
Module (PAM).
Initial version of this MIB module."
::= { ciscoMgmt 110 }
ciscoAtmSwitchFrRmMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIB 1 }
cfaAdapter OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIBObjects 1 }
cfaInterwork OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIBObjects 2 }
-- Textual Conventions
CfaInterworkServiceCategory ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to specify the service category of
a Frame Relay/FUNI to ATM interworking connection.
For definitions of service categories, please refer to
the ATM Forum Traffic Management Specification.
The current implementation supports the following service
categories for connections performing the Frame Relay to
ATM Interworking Function:
Variable bit rate, non real time (VBR-NRT)
Available bit rate (ABR)
Unspecified bit rate (UBR)"
SYNTAX INTEGER {
vbrNrt(1),
abr(2),
ubr(3)
}
--
-- Frame Relay/FUNI To ATM Interworking Resource Management
--
-- The following table defines a set of objects to perform
-- Congestion Control for Frame Relay and FUNI to ATM
-- Interworking connections, on the Frame Relay Port
-- Adapter Module (PAM).
--
cfaAdapterIfVcQThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfaAdapterIfVcQThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of per-VC queue threshold parameters that are used
for congestion control for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay Port
Adapter Module.
These objects become available as each Frame Relay
and FUNI interface is defined on the device. The
corresponding ifTypes are frameRelayService(44)
and atmFuni(106) respectively.
An unique set of threshold parameters are available for
every supported Interworking Function service
category, and would be applied to all connections
belonging to that particular service category, on that
Frame Relay or FUNI interface."
::= { cfaAdapter 1 }
cfaAdapterIfVcQThresholdEntry OBJECT-TYPE
SYNTAX CfaAdapterIfVcQThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of per-VC queue threshold parameters that are used
for congestion control for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay Port
Adapter Module.
The ifIndex in the index clause refers to MIB-II's
ifIndex corresponding to frame-based ATM PAM ports,
i.e., Frame Relay and FUNI."
INDEX { ifIndex, cfaAdapterIfVcQService }
::= { cfaAdapterIfVcQThresholdTable 1 }
CfaAdapterIfVcQThresholdEntry ::= SEQUENCE {
cfaAdapterIfVcQService CfaInterworkServiceCategory,
cfaAdapterIfVcQInqDiscThresh INTEGER,
cfaAdapterIfVcQOutqDiscThresh INTEGER,
cfaAdapterIfVcQInqMarkThresh INTEGER,
cfaAdapterIfVcQOutqMarkThresh INTEGER
}
cfaAdapterIfVcQService OBJECT-TYPE
SYNTAX CfaInterworkServiceCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service category of the connection to which this
entry applies."
::= { cfaAdapterIfVcQThresholdEntry 1 }
cfaAdapterIfVcQInqDiscThresh OBJECT-TYPE
SYNTAX INTEGER (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the Discard Eligible threshold
applied to the Frame Relay - ATM interworking
virtual circuit input queue, on the Frame Relay
PAM.
The input queue is in the direction of
Frame Relay/FUNI interface to the ATM switch fabric.
If the fill level of the input queue for the
Frame Relay - ATM interworking virtual circuit
exceeds this threshold, all frames arriving on
this virtual circuit from the Frame Relay side will
be discarded at the interface if the arriving
frame has its Discard Eligible bit set.
The threshold value is expressed as a
percent-of-full. Setting this object to 100
effectively turns off the threshold."
DEFVAL { 87 }
::= { cfaAdapterIfVcQThresholdEntry 2 }
cfaAdapterIfVcQOutqDiscThresh OBJECT-TYPE
SYNTAX INTEGER (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the Discard Eligible threshold
applied to the Frame Relay - ATM interworking
virtual circuit output queue, on the Frame Relay
PAM.
The output queue is in the direction of the ATM
switch fabric to the Frame Relay/FUNI interface.
If the fill level of the output queue for the
Frame Relay - ATM interworking virtual circuit
exceeds this threshold, all frames arriving on
this virtual circuit from the ATM switch fabric
side will be discarded if the arriving frame has its
Discard Eligible bit set.
The threshold value is expressed as a
percent-of-full. Setting this object to 100
effectively turns off the threshold."
DEFVAL { 87 }
::= { cfaAdapterIfVcQThresholdEntry 3 }
cfaAdapterIfVcQInqMarkThresh OBJECT-TYPE
SYNTAX INTEGER (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the Marking threshold
applied to the Frame Relay - ATM interworking
virtual circuit input queue, on the Frame Relay
PAM.
The input queue is in the direction of
Frame Relay/FUNI interface to the ATM switch fabric.
If the fill level of the input queue for the
Frame Relay - ATM interworking virtual circuit
exceeds this threshold, the following will
happen:
1. For frames coming into the Frame Relay -
ATM interworking virtual circuit from the Frame
Relay side, the corresponding cells will have
the Explicit Forward Congestion Indication (EFCI)
bit set in the ATM cell header, on entry into the
ATM switch fabric.
2. For cells arriving from the ATM switch fabric
side for this Frame Relay - ATM interworking
virtual circuit, the corresponding frames will have the
Backward Explicit Congestion Notification (BECN)
bit set upon exiting the Frame Relay interface.
The threshold value is expressed as a
percent-of-full. Setting this object to 100
effectively turns off the threshold."
DEFVAL { 75 }
::= { cfaAdapterIfVcQThresholdEntry 4 }
cfaAdapterIfVcQOutqMarkThresh OBJECT-TYPE
SYNTAX INTEGER (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the Marking threshold
applied to the Frame Relay - ATM interworking
virtual circuit output queue, on the Frame Relay
PAM.
The output queue is in the direction of the ATM
switch fabric to the Frame Relay/FUNI interface.
If the fill level of the output queue for the
Frame Relay - ATM interworking virtual circuit
exceeds this threshold, the following will
happen:
1. For frames coming into the Frame Relay -
ATM interworking virtual circuit from the Frame
Relay side, the frame will have the BECN bit set
in the Frame Relay header before getting converted
to cells and entering the ATM switch fabric.
2. For cells arriving from the ATM switch fabric
side for this Frame Relay - ATM interworking
virtual circuit, the corresponding frames will
have the Forward Explicit Congestion Notification
(FECN) bit set in the Frame Relay header upon
exiting the Frame Relay interface. For FUNI -
ATM interworking connections, the Congestion
Notification (CN) bit gets set in the FUNI
header.
The threshold value is expressed as a
percent-of-full. Setting this object to 100
effectively turns off the threshold."
DEFVAL { 75 }
::= { cfaAdapterIfVcQThresholdEntry 5 }
--
-- The following table defines a set of objects to enable
-- or disable VBR Overflow Servicing for connections
-- performing Frame Relay/FUNI to ATM Interworking
-- Function, on the Frame Relay Port Adapter Module (PAM).
--
cfaAdapterIfVbrServOflowTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfaAdapterIfVbrServOflowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Resource Management parameters that are used
for VBR Overflow Servicing for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay
Port Adapter Module.
This object becomes available as each Frame Relay
and FUNI interface is defined on the device. The
corresponding ifTypes are frameRelayService(44)
and atmFuni(106) respectively."
::= { cfaAdapter 2 }
cfaAdapterIfVbrServOflowEntry OBJECT-TYPE
SYNTAX CfaAdapterIfVbrServOflowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of Resource Management parameters that are used
for VBR Overflow Servicing for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay
Port Adapter Module."
INDEX { ifIndex }
::= { cfaAdapterIfVbrServOflowTable 1 }
CfaAdapterIfVbrServOflowEntry ::= SEQUENCE {
cfaAdapterIfVbrServOflow TruthValue
}
cfaAdapterIfVbrServOflow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configuration to enable the overflow feature for VBR-NRT
connections on the interface. When the PAM services VBR-NRT
VC input queues, sending ATM traffic to the switch
fabric, it can strictly limit the rate at which the data
is sent to contracted sustained cell rate (SCR) for the
connection (overflow disabled), or allow data transfer
over SCR (overflow enabled). Setting the value to true
enables overflow."
DEFVAL { true }
::= { cfaAdapterIfVbrServOflowEntry 1 }
-- The following table defines a set of objects for
-- configuration of the resource management
-- of an interface with Frame Relay encapsulation
-- on the FR/FUNI Port Adaptor Module (PAM).
cfaAdapterIfFrConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfaAdapterIfFrConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of resource management parameters for
the Frame Relay interface on the FR/FUNI Port
Adapter Module."
::= { cfaAdapter 3 }
cfaAdapterIfFrConfigEntry OBJECT-TYPE
SYNTAX CfaAdapterIfFrConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about
Resource Management of an Interface with Frame Relay
encapsulation."
INDEX { ifIndex }
::= { cfaAdapterIfFrConfigTable 1 }
CfaAdapterIfFrConfigEntry ::= SEQUENCE {
cfaAdapterIfOverbooking INTEGER
}
cfaAdapterIfOverbooking OBJECT-TYPE
SYNTAX INTEGER (100..1000)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines overbooking of CIR on an acess link/port
in percent of access rate. The total of all CIR's for all
frame-relay pvc's and frame-relay soft-vc's cannot exceed CIR
overbooking factor times access rate. For example,
overbooking of 200% means the total of all CIR's can be
configured up to twice of the access rate. The default is
100% - no overbooking is set."
DEFVAL { 100 }
::= { cfaAdapterIfFrConfigEntry 1 }
--
-- The following are a set of objects for viewing
-- available and allocated resources on a Frame Relay/FUNI
-- interface.
--
cfaInterworkIfResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfaInterworkIfResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that can be used to view
available and allocated resources on Frame Relay
and FUNI interfaces defined on a Frame Relay Port
Adapter Module (PAM).
An unique set of available and allocated resources
are available for the transmit direction (going out
of the interface to the external world), and
receive direction (coming into the interface from
the external world).
These available and allocated resources are available
for every supported Interworking Function service
category.
These objects become available as each Frame Relay
and FUNI interface is defined on the device. The
corresponding ifTypes are frameRelayService(44)
and atmFuni(106) respectively."
::= { cfaInterwork 1 }
cfaInterworkIfResourceEntry OBJECT-TYPE
SYNTAX CfaInterworkIfResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that can be used to view
available and allocated resources on Frame Relay
and FUNI interfaces defined on a Frame Relay Port
Adapter Module (PAM)."
INDEX { ifIndex , cfaInterworkIfVcQService }
::= { cfaInterworkIfResourceTable 1 }
CfaInterworkIfResourceEntry ::= SEQUENCE {
cfaInterworkIfVcQService CfaInterworkServiceCategory,
cfaInterworkIfRxAvailRate Gauge32,
cfaInterworkIfTxAvailRate Gauge32,
cfaInterworkIfRxAllocRate Gauge32,
cfaInterworkIfTxAllocRate Gauge32
}
cfaInterworkIfVcQService OBJECT-TYPE
SYNTAX CfaInterworkServiceCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service category of the connection to which this
entry applies."
::= { cfaInterworkIfResourceEntry 1 }
cfaInterworkIfRxAvailRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available bit rate for traffic received on the
Frame Relay interface. This is the bandwidth available
for connections. This value decreases as a
result of setup of a connection requesting non-zero
Committed Information Rate (CIR) in the receive direction,
and increases as a result of the release of such a
connection."
::= { cfaInterworkIfResourceEntry 2 }
cfaInterworkIfTxAvailRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available bit rate for traffic sent out the
Frame Relay interface. This is the bandwidth available
for connections. This value decreases as a
result of setup of a connection requesting non-zero CIR
in the transmit direction, and increases as a result of
the release of such a connection."
::= { cfaInterworkIfResourceEntry 3 }
cfaInterworkIfRxAllocRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The allocated bit rate for traffic received on the
Frame Relay interface. This is the bandwidth allocated
to connections. This value increases as a
result of setup of a connection requesting non-zero CIR
in the receive direction, and decreases as a result of
the release of such a connection."
::= { cfaInterworkIfResourceEntry 4 }
cfaInterworkIfTxAllocRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The allocated bit rate for traffic sent out the
Frame Relay interface. This is the bandwidth allocated
to connections. This value increases as a
result of setup of a connection requesting non-zero CIR
in the transmit direction, and decreases as a result of
the release of such a connection."
::= { cfaInterworkIfResourceEntry 5 }
-- notifications
ciscoAtmSwitchFrRmMIBNotifications
OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIB 2 }
-- (no notifications are currently defined)
-- conformance information
ciscoAtmSwitchFrRmMIBConformance
OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIB 3 }
ciscoAtmSwitchFrRmMIBCompliances
OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIBConformance 1 }
ciscoAtmSwitchFrRmMIBGroups
OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrRmMIBConformance 2 }
-- compliance statements
ciscoAtmSwitchFrRmMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the Cisco Frame Relay/FUNI
to ATM Interworking Function Resource Management MIB."
MODULE -- this module
MANDATORY-GROUPS { cfaAdapterGroup, cfaInterworkGroup }
::= { ciscoAtmSwitchFrRmMIBCompliances 1 }
-- units of conformance
cfaAdapterGroup OBJECT-GROUP
OBJECTS { cfaAdapterIfVcQInqDiscThresh,
cfaAdapterIfVcQOutqDiscThresh,
cfaAdapterIfVcQInqMarkThresh,
cfaAdapterIfVcQOutqMarkThresh,
cfaAdapterIfVbrServOflow,
cfaAdapterIfOverbooking
}
STATUS current
DESCRIPTION
"A collection of objects which manage resources for
Cisco Frame Relay/FUNI to ATM Interworking Function
connections."
::= { ciscoAtmSwitchFrRmMIBGroups 1 }
cfaInterworkGroup OBJECT-GROUP
OBJECTS { cfaInterworkIfRxAvailRate, cfaInterworkIfTxAvailRate,
cfaInterworkIfRxAllocRate, cfaInterworkIfTxAllocRate
}
STATUS current
DESCRIPTION
"A collection of objects which manage resources for
Cisco Frame Relay/FUNI to ATM Interworking Function
connections."
::= { ciscoAtmSwitchFrRmMIBGroups 2 }
END