WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

722
mibs/cabletron/ELS100-S24TX2M-MIB Normal file
View File

@ -0,0 +1,722 @@
ELS100-S24TX2M-MIB DEFINITIONS ::= BEGIN
IMPORTS
internet
FROM RFC1155-SMI
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC;
-- private OBJECT IDENTIFIER ::= { internet 4 }
-- enterprises OBJECT IDENTIFIER ::= { private 1 }
-- cabletron OBJECT IDENTIFIER ::= { enterprises 52 }
-- namingTree OBJECT IDENTIFIER ::= { cabletron 3 }
-- mtExpanded OBJECT IDENTIFIER ::= { namingTree 9 }
-- mtThrdParty OBJECT IDENTIFIER ::= { mtExpanded 1 }
-- tpStandAlone OBJECT IDENTIFIER ::= { mtThrdParty 10 }
tpELS100S24TX2M MODULE-IDENTITY
LAST-UPDATED "200202202202Z" -- Wed Feb 20 22:02 GMT 2002
ORGANIZATION "Enterasys Networks, Inc."
CONTACT-INFO
"Enterasys Networks, Inc.
35 Industrial Way, P.O. Box 5005
Rochester, NH 03867-5005
(603) 332-9400
support@enterasys.com
http://www.enterasys.com"
DESCRIPTION
"The MIB module for ELS100-S24TX2M."
REVISION "200208051753Z" -- Mon Aug 5 17:53 GMT 2002
DESCRIPTION
"Added switchOIDTable for identifying the individual
switches in a stack of switches."
REVISION "200202202202Z" -- Wed Feb 20 22:02 GMT 2002
DESCRIPTION
"Pretty print."
REVISION "199910010000Z"
DESCRIPTION
"Initial version of this MIB."
-- ::= { tpStandAlone 7 }
::= { internet private(4) enterprises(1) cabletron(52)
namingTree(3) mtExpanded(9) mtThrdParty(1)
tpStandAlone(10) tpELS100S24TX2M(7) }
switchInfo OBJECT IDENTIFIER ::= { tpELS100S24TX2M 1 }
switchPortMgt OBJECT IDENTIFIER ::= { tpELS100S24TX2M 2 }
systemSTAMgt OBJECT IDENTIFIER ::= { tpELS100S24TX2M 3 }
tftpDownloadMgt OBJECT IDENTIFIER ::= { tpELS100S24TX2M 4 }
restartMgt OBJECT IDENTIFIER ::= { tpELS100S24TX2M 5 }
portMirrorMgt OBJECT IDENTIFIER ::= { tpELS100S24TX2M 6 }
igmpMgt OBJECT IDENTIFIER ::= { tpELS100S24TX2M 7 }
--
-- switchInfo
--
switchNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of switches present on this system."
::= { switchInfo 1 }
switchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of descriptive and status information about
switches in this system."
::= { switchInfo 2 }
switchInfoEntry OBJECT-TYPE
SYNTAX SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information
about a single switch in this system. "
INDEX { swUnitIndex }
::= { switchInfoTable 1 }
SwitchInfoEntry ::= SEQUENCE
{
swUnitIndex Integer32,
swMainBoardHwVer DisplayString,
swMainBoardFwVer DisplayString,
swAgentBoardHwVer DisplayString,
swAgentBoardFwVer DisplayString,
swAgentBoardPOSTCodeVer DisplayString,
swPortNumber Integer32,
swPowerStatus INTEGER,
swExpansionSlot1 INTEGER,
swExpansionSlot2 INTEGER,
swRoleInSystem INTEGER
}
swUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchInfoEntry 1 }
swMainBoardHwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version of the main board."
::= { switchInfoEntry 2 }
swMainBoardFwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware version of the main board."
::= { switchInfoEntry 3 }
swAgentBoardHwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version of the agent board."
::= { switchInfoEntry 4 }
swAgentBoardFwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware version of the agent board."
::= { switchInfoEntry 5 }
swAgentBoardPOSTCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"POST code version of the agent board."
::= { switchInfoEntry 6 }
swPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total port number of this switch
(including expansion slot)."
::= { switchInfoEntry 7 }
swPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
internalPower(1),
redundantPower(2),
internalAndRedundantPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the switch using internalPower(1),
redundantPower(2) or both(3)"
::= { switchInfoEntry 8 }
swExpansionSlot1 OBJECT-TYPE
SYNTAX INTEGER {
hundredBaseFX2Port(1),
thousandBaseSX(2),
stackingModule4GB(3),
hundredBaseFX1Port(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
stackingModule2GB(8),
other(9),
notPresent(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of expansion module in this switch slot 1."
::= { switchInfoEntry 9 }
swExpansionSlot2 OBJECT-TYPE
SYNTAX INTEGER {
hundredBaseFX2Port(1),
thousandBaseSX(2),
stackingModule4GB(3),
hundredBaseFX1Port(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
stackingModule2GB(8),
other(9),
notPresent(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of expansion module in this switch slot 2."
::= { switchInfoEntry 10 }
swRoleInSystem OBJECT-TYPE
SYNTAX INTEGER {
master(1),
backupMaster(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system."
::= { switchInfoEntry 11 }
switchOIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchOIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of System Object Identifiers for switches
in this system."
::= { switchInfo 3 }
switchOIDEntry OBJECT-TYPE
SYNTAX SwitchOIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing System Object
Identifier for a single switch in this system."
INDEX { switchOIDIndex }
::= { switchOIDTable 1 }
SwitchOIDEntry ::= SEQUENCE
{
switchOIDIndex INTEGER,
switchOIDValue OBJECT IDENTIFIER
}
switchOIDIndex OBJECT-TYPE
SYNTAX INTEGER( 1 .. 65535 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.
Index value 1 always represents the Master in a
stacked configuration and the only device in a
standalone configuration.
Subsequent indices are sequential with the lowest
number representing the Slave nearest the Master
and so on."
::= { switchOIDEntry 1 }
switchOIDValue OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the System Object Identifier
that uniquely identifies the type of switch."
::= { switchOIDEntry 2 }
--
-- switchPortMgt
--
switchPortMgtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchPortMgtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of descriptive and status information about
configuration of each switch ports (including
expansion slot) in this system."
::= { switchPortMgt 1 }
switchPortMgtEntry OBJECT-TYPE
SYNTAX SwitchPortMgtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about
configuration in one switch port of the switch."
INDEX { swUnitIndex, swPortMgtIndex }
::= { switchPortMgtTable 1 }
SwitchPortMgtEntry ::= SEQUENCE
{
swPortMgtIndex Integer32,
swPortMgtPortType INTEGER,
swPortMgtSpeedDpxAdmin INTEGER,
swPortMgtSpeedDpxInUse INTEGER,
swPortMgtFlowCtrlAdmin INTEGER,
swPortMgtFlowCtrlInUse INTEGER
}
swPortMgtIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the port within the switch
for which this entry contains information."
::= { switchPortMgtEntry 1 }
swPortMgtPortType OBJECT-TYPE
SYNTAX INTEGER {
hundredBaseTX(1),
hundredBaseFX(2),
thousandBaseSX(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port type is tenBaseT/hundredBaseTX(1),
hundredBaseFX(2) or thousandBaseSX(3)."
::= { switchPortMgtEntry 2 }
swPortMgtSpeedDpxAdmin OBJECT-TYPE
SYNTAX INTEGER {
halfDuplex10(1),
fullDuplex10(2),
halfDuplex100(3),
fullDuplex100(4),
halfDuplex1000(5),
fullDuplex1000(6),
autoNegotiation(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the port speed and duplex mode as follows:
halfDuplex10(1) - 10Mbps and half duplex mode
fullDuplex10(2) - 10Mbps and full duplex mode
halfDuplex100(3) - 100Mbps and half duplex mode
fullDuplex100(4) - 100Mbps and full duplex mode
halfDuplex1000(5) - 1000Mbps and half duplex mode
fullDuplex1000(6) - 1000Mbps and full duplex mode
autoNegotiation(7) - let the switch to negotiate with
the other end of connection.
hundredBaseTX port can be set as
halfDuplex10(1)
fullDuplex10(2)
halfDuplex100(3)
fullDuplex100(4)
autoNegotiation(7)
hundredBaseFX port can be set as
halfDuplex100(3)
fullDuplex100(4)
thousandBaseSX port can be set as
halfDuplex1000(5)
fullDuplex1000(6)
autoNegotiation(7)
The actual operating speed and duplex of the port is
given by swPortMgtSpeedDpxInUse."
DEFVAL { autoNegotiation }
::= { switchPortMgtEntry 3 }
swPortMgtSpeedDpxInUse OBJECT-TYPE
SYNTAX INTEGER {
halfDuplex10(1),
fullDuplex10(2),
halfDuplex100(3),
fullDuplex100(4),
halfDuplex1000(5),
fullDuplex1000(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating speed and duplex mode of the switched port."
::= { switchPortMgtEntry 4 }
swPortMgtFlowCtrlAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode,
the port uses backPressure flow control mechanism.
When the port is operating in fullDuplex mode,
the port uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(3) Flow control mechanism is backPressure.
When the port is in fullDuplex mode
this flow control mechanism will not function.
(4) Flow control mechanism is IEEE 802.3x flow control.
When the port is in halfDuplex mode
this flow control mechanism will not function.
hundredBaseTX and thousandBaseSX port can be set as:
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4).
hundredBaseFX port can be set as:
enabled(1),
disabled(2),
backPressure(3).
The actual flow control mechanism is used given by
swPortMgtFlowCtrlInUse."
DEFVAL { enabled }
::= { switchPortMgtEntry 5 }
swPortMgtFlowCtrlInUse OBJECT-TYPE
SYNTAX INTEGER {
backPressure(1),
dot3xFlowControl(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(1) BackPressure flow control mechanism is used.
(2) IEEE 802.3 flow control mechanism is used.
(3) Flow control mechanism is disabled. "
::= { switchPortMgtEntry 6 }
--
-- systemSTAMgt
--
systemSTAStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled. "
DEFVAL { enabled }
::= { systemSTAMgt 1 }
--
-- tftpDownloadMgt
--
tftpDownloadServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of a TFTP server from which a
firmware image can be downloaded."
DEFVAL { '00000000'H }
::= { tftpDownloadMgt 1 }
--tftpDownloadMainBoardFwFileName OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..80))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION ""
-- DEFVAL { "es3526f.bin" }
-- ::= { tftpDownloadMgt 2 }
--tftpDownloadMainBoardFwSelected OBJECT-TYPE
-- SYNTAX INTEGER {
-- selected(1),
-- notSelected(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Setting this object as selected. The system will download
-- main board firmware when the download action be trigged."
-- DEFVAL { notSelected }
-- ::= { tftpDownloadMgt 3 }
tftpDownloadAgentBoardFwFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
DEFVAL { "es3526f.bin" }
::= { tftpDownloadMgt 2 }
tftpDownloadAgentBoardFwDownloadNode OBJECT-TYPE
SYNTAX INTEGER {
permanent(1),
temporary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether a newly upgraded firmware
version should write to flash. When this object
is temporary(2), following a successful upgrade
the system will switch to run the new firmware but
will not upgrade the new firmware to flash. That
means after a power cycle, system will run the
firmware residing the flash.
When this object is permanent(1), following a
successful firmware upgrade, the flash will be
upgraded and the system will automatically switch
to run the new firmware."
DEFVAL { permanent }
::= { tftpDownloadMgt 3 }
--tftpDownloadAgentBoardFwSelected OBJECT-TYPE
-- SYNTAX INTEGER {
-- selected(1),
-- notSelected(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Setting this object as selected. The system will download
-- agent board firmware when the download action be trigged."
-- DEFVAL { notSelected }
-- ::= { tftpDownloadMgt 4 }
tftpDownloadStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notActive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to active(1) trigger the TFTP
download action. Setting this object to notActive(2)
has no effect. The system always returns the value
notActive(2) when this object is read."
::= { tftpDownloadMgt 4 }
--
-- restartMgt
--
restartOptionPOST OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object as enabled. The system will do POST
when it restart"
DEFVAL { enabled }
::= { restartMgt 1 }
restartOptionReloadFactoryDefault OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object as enabled. The system will do
factory reset when it restart"
DEFVAL { disabled }
::= { restartMgt 2 }
restartOptionKeepIpSetting OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object as enabled. The system will keep IP
setting when it do factory reset."
DEFVAL { enabled }
::= { restartMgt 3 }
restartOptionKeepUserAuthentication OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object as enabled. The system will keep
user authentication setting when it do factory reset."
DEFVAL { enabled }
::= { restartMgt 4 }
restartAction OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notActive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to active(1) trigger the system
restart. Setting this object to notActive(2) has
no effect. The system always returns the value
notActive(2) when this object is read."
::= { restartMgt 5 }
--
-- portMirrorMgt
--
portMirrorStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port mirroring function status.
(1) mirroring function is enabled.
(2) mirroring function is disabled."
::= { portMirrorMgt 1 }
portMirrorSnifferPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Linear port number of sniffer port to which all
frames to/from mirrored ports are sent. Frames
are only mirrored if the portMirrorStatus object
is set to enabled(1)."
::= { portMirrorMgt 2 }
portMirrorMirroredPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Linear port number of mirrored port. The traffic of
mirrored port will be 'copied' to sniffer port."
::= { portMirrorMgt 3 }
--
-- igmpMgt
--
igmpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. The default is enabled."
::= { igmpMgt 1 }
igmpQueryCount OBJECT-TYPE
SYNTAX INTEGER (2..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of queries that have not been heard on the
system before the system starts taking action to solicit
reports(default is 5)."
::= { igmpMgt 2 }
igmpReportDelay OBJECT-TYPE
SYNTAX INTEGER (3..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout value(mins) between IGMP reports received on a port
for an IP Multicast Address that can pass before the system
sends an IGMP Query out the port and removes it from the
list(default is 5 minutes)."
::= { igmpMgt 3 }
END