WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

847
mibs/broadcom/BRCM-BATTERY-MGMT-MIB Normal file
View File

@ -0,0 +1,847 @@
--****************************************************************************
--
-- Copyright (c) 2005-2009 Broadcom Corporation
--
-- This program is the proprietary software of Broadcom Corporation and/or
-- its licensors, and may only be used, duplicated, modified or distributed
-- pursuant to the terms and conditions of a separate, written license
-- agreement executed between you and Broadcom (an "Authorized License").
-- Except as set forth in an Authorized License, Broadcom grants no license
-- (express or implied), right to use, or waiver of any kind with respect to
-- the Software, and Broadcom expressly reserves all rights in and to the
-- Software and all intellectual property rights therein. IF YOU HAVE NO
-- AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE IN ANY WAY,
-- AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE ALL USE OF THE
-- SOFTWARE.
--
-- Except as expressly set forth in the Authorized License,
--
-- 1. This program, including its structure, sequence and organization,
-- constitutes the valuable trade secrets of Broadcom, and you shall use all
-- reasonable efforts to protect the confidentiality thereof, and to use this
-- information only in connection with your use of Broadcom integrated circuit
-- products.
--
-- 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED
-- "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES, REPRESENTATIONS
-- OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
-- RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY DISCLAIMS ANY AND ALL
-- IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR
-- A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET
-- ENJOYMENT, QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. YOU ASSUME
-- THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
--
-- 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM
-- OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL,
-- INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY
-- RELATING TO YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM
-- HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN
-- EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR U.S. $1,
-- WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
-- FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
--
--****************************************************************************
-- Filename: brcm-battery-mgmt.mib
-- Author: Kevin O'Neal
-- Creation Date: February 11, 2005
--
--**************************************************************************
-- Description:
--
-- private MIB for runtime (not factory) management of battery
--
--**************************************************************************
-- Revision History:
--
--**************************************************************************
BRCM-BATTERY-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TruthValue,
DateAndTime,
DisplayString
FROM SNMPv2-TC
cableDataMgmtMIBObjects
FROM BRCM-CABLEDATA-MGMT-MIB
PositiveInteger
FROM UPS-MIB;
batteryMgmt MODULE-IDENTITY
LAST-UPDATED "200912140000Z"
ORGANIZATION "Broadcom Corporation"
CONTACT-INFO
" BANANA-CABLEDATA
(cableData branch of the
Broadcom Assigned Numbers and Naming Authority)
Broadcom Corporation
Postal: 4385 River Green Parkway
Duluth, GA 30096
USA
Tel: +1 770 232-0018
E-mail: banana-cabledata@broadcom.com"
DESCRIPTION
"Broadcom proprietary MIB for runtime management of objects related
to battery powered devices."
REVISION "200912140000Z"
DESCRIPTION
"Added new alarm bcmAlarmLowPower"
REVISION "200903050000Z"
DESCRIPTION
"Corrected return values from battChargerLifeTestStatus and added notes
to battNextLifeTest"
REVISION "200810100000Z"
DESCRIPTION
"Added objects to facilitate automated testing of periodic life cycle test."
REVISION "200807100000Z"
DESCRIPTION
"Added objects for control of periodic life testing and hardware faults."
REVISION "200806180000Z"
DESCRIPTION
"Added group batteryThermalMgmt."
REVISION "200803210000Z"
DESCRIPTION
"Changed max-access of battChargerMaximumCharge to read-only."
REVISION "200709260000Z"
DESCRIPTION
"Added object battTemperature to the batteryTable."
REVISION "200702050000Z"
DESCRIPTION
"Module description was updated.
Compilability issues were cleaned up:
- Chronological order of revision history was corrected.
- Range restriction was added to object battIndex."
REVISION "200612080000Z"
DESCRIPTION
"Added alarm bcmAlarmTempBadDischargeInhibited.
Changed names of bcmAlarmBadTempChargeSuspended and
bcmAlarmBadTempPowerReduced to bcmAlarmTempBadChargeSuspended
and bcmAlarmTempBadPowerReduced for naming consistency with
upsAlarmTempBad from the UPS-MIB."
REVISION "200606200000Z"
DESCRIPTION
"Added objects related to per-pack EEPROM data to the batteryTable."
REVISION "200602080000Z"
DESCRIPTION
"Added object battErrors to the batteryTable."
REVISION "200602070100Z"
DESCRIPTION
"Added objects battEstimatedMinutesRemaining and
battEstimatedChargeRemaining to the batteryTable."
REVISION "200602070000Z"
DESCRIPTION
"Added alarms bcmAlarmBadTempChargeSuspended and
bcmAlarmBadTempPowerReduced."
REVISION "200512010000Z"
DESCRIPTION
"Added group batteryBcmAlarms and object
battChargerLowChargeThreshold."
REVISION "200508230000Z"
DESCRIPTION
"Added group batteryPowerMgmt."
REVISION "200504190000Z"
DESCRIPTION
"Added object battChargerReplaceBatteryThreshold."
REVISION "200502110000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { cableDataMgmtMIBObjects 10 }
HardwareFault ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type represents a bit-mask of potential hardware fault
conditions in the battChargerHardwareFaultsAllowed and
battChargerHardwareFaultsDetected entries."
SYNTAX BITS {
chargerOverVoltageFault(0),
chargerOverCurrentFault(1),
chargerPrequalVoltageFault(3),
chargerDischargeOverCurrentFault(4),
chargerGeneralDischargeFault(5),
chargerInputOverVoltageFault(8),
chargerUnexpectedBatteryVoltage(9),
chargerUnexpectedBatteryCurrent(10),
chargerBatteryOverVoltage(11),
chargerBatteryEnablesShorted(12)
}
batteryMgmtBase OBJECT IDENTIFIER ::= { batteryMgmt 1 }
batteryTable OBJECT-TYPE
SYNTAX SEQUENCE OF BatteryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of batteries present on the system."
::= { batteryMgmtBase 1 }
batteryEntry OBJECT-TYPE
SYNTAX BatteryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing the characteristics of an individual battery."
INDEX { battIndex }
::= { batteryTable 1 }
BatteryEntry ::=
SEQUENCE {
battIndex Integer32,
battCapacity Unsigned32,
battMaximumVoltage Unsigned32,
battMinimumVoltage Unsigned32,
battMeasuredVoltage Unsigned32,
battIsValid TruthValue,
battIsSelected TruthValue,
battEstimatedMinutesRemaining PositiveInteger,
battEstimatedChargeRemaining INTEGER,
battErrors Unsigned32,
battEpromRevision DisplayString,
battPackSupplier DisplayString,
battModelNumber DisplayString,
battSerialNumber DisplayString,
battCellSupplier DisplayString,
battCellCapacity DisplayString,
battCellDateCode DisplayString,
battPackDateCode DisplayString,
battTemperature Integer32,
battPackGUID DisplayString,
battActualCapacity Unsigned32,
battAge Unsigned32,
battNextLifeTest DisplayString
battDischargeTable OCTET STRING,
battCompressedDischargeTable OCTET STRING,
battInvalidateNonVolSlot INTEGER
}
battIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the instance number of this individual battery."
::= { batteryEntry 1 }
battCapacity OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliamp hours"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The charge capacity of this battery."
::= { batteryEntry 2 }
battMaximumVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "millivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voltage at which this battery is considered to be fully charged.
Note that if battChargerMaximumCharge is set to less than 100%, the
battery will never be charged to this voltage."
::= { batteryEntry 3 }
battMinimumVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "millivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voltage at which this battery is considered to be fully
discharged."
::= { batteryEntry 4 }
battMeasuredVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "millivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The most recently measured voltage of this battery."
::= { batteryEntry 5 }
battIsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this battery is considered valid by the battery
charger. A value of false(2) here indicates some kind of failure
with this battery."
::= { batteryEntry 6 }
battIsSelected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this battery is currently selected for charging or
discharging."
::= { batteryEntry 7 }
battEstimatedMinutesRemaining OBJECT-TYPE
SYNTAX PositiveInteger
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the time to depletion of this battery's charge
under the present load conditions if the utility power
is off and remains off, or if it were to be lost and
remain off."
::= { batteryEntry 8 }
battEstimatedChargeRemaining OBJECT-TYPE
SYNTAX INTEGER (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of this battery's charge remaining expressed
as a percent of full charge."
::= { batteryEntry 9 }
battErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of errors reported by the charger when trying
to charge this battery. This object should always have a value of
zero if all is well with the charger and the battery."
::= { batteryEntry 10 }
battEpromRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the battery EPROM."
::= { batteryEntry 11 }
battPackSupplier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Pack Supplier"
::= { batteryEntry 12 }
battModelNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Model Number."
::= { batteryEntry 13 }
battSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Serial Number."
::= { batteryEntry 14 }
battCellSupplier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Cell Supplier."
::= { batteryEntry 15 }
battCellCapacity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Cell Capacity."
::= { batteryEntry 16 }
battCellDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Cell Date Code(mmddyy)."
::= { batteryEntry 17 }
battPackDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery Pack Date Code(mmddyy)."
::= { batteryEntry 18 }
battTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature as reported by this battery. If the battery pack does
not support temperature measurement then this object will not be
supported."
::= { batteryEntry 19 }
battPackGUID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The battery pack globally unique ID (0x<cc><iiiiiiii><ff>).
Where <cc> is an 8-bit CRC, <iiiiiiii> is the 48-bit ID, and <ff> is
the 8-bit family code. If the hardware does not support reading
the GUID then this object will not be supported."
::= { batteryEntry 20 }
battActualCapacity OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliamp hours"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current maximum charge capacity of this battery. If the hardware
does not support periodic life testing, this will return the same
value as battDesignCapacity"
::= { batteryEntry 21 }
battAge OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the current age of the battery as a percentage of its design
capacity. This value could be calculated by dividing battActualCapacity
by battDesignCapacity (however, this value clips at 100%.)"
::= { batteryEntry 22 }
battNextLifeTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Returns/specifies the date and time of the next life test (mmddyyyy hh:mm:ss)
for the specified pack. If the charger does not support periodic life
testing then this object will not be supported. Setting this object to
a value that resolves to a date in the past triggers an immediate life test.
Note than any character - not just a space character - may be used to
separate the date and time portions when setting this value."
::= { batteryEntry 23 }
battDischargeTable OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the full discharge table for the specified battery as a comma-delimited string"
::= { batteryEntry 24 }
battCompressedDischargeTable OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the compressed discharge table from the specified battery"
::= { batteryEntry 25 }
battInvalidateNonVolSlot OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Invalidates the specified non-vol slot"
::= { batteryEntry 26 }
batteryCharger OBJECT IDENTIFIER ::= { batteryMgmt 2 }
battChargerMicrocodeVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the battery charger microcode."
::= { batteryCharger 1 }
battChargerMicrocodeBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The build date and time of the battery charger microcode."
::= { batteryCharger 2 }
battChargerInputVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "millivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The most recently measured input voltage to the battery charger.
Typically, if operating on battery power, this value will approach
zero. If operating on utility power, this value will approach the
value of the power supplied to the device."
::= { batteryCharger 3 }
battChargerState OBJECT-TYPE
SYNTAX INTEGER {
initializing(1),
idle(2),
sleep(3),
chargeInit(4),
preQualification(5),
fastCharge(6),
trickleCharge(7),
topOff(8),
discharge(9),
forcedDischarge(10),
eternalSleep(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the battery charger. Note that all states may
not be supported on all types of chargers."
::= { batteryCharger 4 }
battChargerMaximumCharge OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the level to which the charger will charge the batteries."
::= { batteryCharger 5 }
battChargerReplaceBatteryThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum charge percentage that the battery must be able
to reach when charging. If a battery cannot be charged above this
percentage, it will be considered bad and battIsValid will transition
to false(2)."
::= { batteryCharger 6 }
battChargerLowChargeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the charge percentage at which the bcmAlarmLowBatteryCharge
will be raised."
DEFVAL { 25 }
::= { batteryCharger 7 }
battChargerHardwareFaultsAllowed OBJECT-TYPE
SYNTAX HardwareFault
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the hardware faults that are currently allowed to affect the
battery subsystem. If the charger does not support hardware faults then
this object will not be supported. See bcmAlarmHardwareFault for a description
of appropriate usage. Default value is all faults enabled."
::= { batteryCharger 8 }
battChargerHardwareFaultsDetected OBJECT-TYPE
SYNTAX HardwareFault
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the hardware faults that are currently active in the battery
subsystem. Writing any valoe to this entry caues ALL faults to be reset.
See bcmAlarmHardwareFault for a description of appropriate usage. If the charger
does not support hardware faults then this object will not be supported.
Default value is zero (0)."
::= { batteryCharger 9 }
battChargerLifeTestInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of days between periodic life tests (default = 180).
If the charger does not support periodic life testing then this object
will not be supported."
::= { batteryCharger 10 }
battChargerLifeTestEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not periodic life testing is enabled. If the charger
does not support periodic life testing then this object will not be supported.
Default value is FALSE."
::= { batteryCharger 11 }
battChargerLifeTestTOD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time of day (hh:mm) using a 24-hour clock at which battery
life testing will be scheduled. If the charger does not support periodic
life testing then this object will not be supported. Default value is '22:00'."
::= { batteryCharger 12 }
battChargerLifeTestStatus OBJECT-TYPE
SYNTAX INTEGER {
lTStateIdle(1),
lTStateBegin(2),
lTStatePTD(3),
lTStateStartCharge(4),
lTStateHWIMP(5),
lTStateCharge(6),
lTStateStartSWIMP(7),
lTStateComplSWIMP(8),
lTStateDischarge(9),
lTStateComplete(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the current life test state"
::= { batteryCharger 13 }
battChargerAbortLifeTest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to TRUE aborts an in-progress life test. Reads always return
FALSE. No effect if a life test is not currently in progress. If the
charger does not support periodic life testing then this object will not
be supported."
::= { batteryCharger 14 }
batteryPowerMgmt OBJECT IDENTIFIER ::= { batteryMgmt 3 }
batteryPowerMgmtInterfaces OBJECT IDENTIFIER ::= { batteryPowerMgmt 1 }
battPowerMgmtCmDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds following transition to battery power
before the DOCSIS CM interface will enter power management mode. If
set to -1, the interface will never enter power management mode and
will remain at full power until utility power is restored or battery
charge is depleted."
DEFVAL { 0 }
::= { batteryPowerMgmtInterfaces 1 }
battPowerMgmtEthernetDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds following transition to battery power
before the ethernet interface will enter power management mode. If
set to -1, the interface will never enter power management mode and
will remain at full power until utility power is restored or battery
charge is depleted."
DEFVAL { 0 }
::= { batteryPowerMgmtInterfaces 2 }
battPowerMgmtUsbDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds following transition to battery power
before the USB interface will enter power management mode. If
set to -1, the interface will never enter power management mode and
will remain at full power until utility power is restored or battery
charge is depleted."
DEFVAL { 0 }
::= { batteryPowerMgmtInterfaces 3 }
battPowerMgmtWiFiDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds following transition to battery power
before the WiFi interface will enter power management mode. If
set to -1, the interface will never enter power management mode and
will remain at full power until utility power is restored or battery
charge is depleted."
DEFVAL { 0 }
::= { batteryPowerMgmtInterfaces 4 }
battPowerMgmtBluetoothDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds following transition to battery power
before the bluetooth interface will enter power management mode. If
set to -1, the interface will never enter power management mode and
will remain at full power until utility power is restored or battery
charge is depleted."
DEFVAL { 0 }
::= { batteryPowerMgmtInterfaces 5 }
battPowerMgmtHpnaDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds following transition to battery power
before the HPNA interface will enter power management mode. If
set to -1, the interface will never enter power management mode and
will remain at full power until utility power is restored or battery
charge is depleted."
DEFVAL { 0 }
::= { batteryPowerMgmtInterfaces 6 }
-- batteryBcmAlarms provides a node under which enterprise-specific alarm
-- OIDs may be defined for use in the upsAlarmTable.
batteryBcmAlarms OBJECT IDENTIFIER ::= { batteryMgmt 4 }
bcmAlarmLowBatteryCharge OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The value of upsEstimatedChargeRemaining is less than or equal
to the value of battChargerLowChargeThreshold."
::= { batteryBcmAlarms 1 }
bcmAlarmTempBadChargeSuspended OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The temperature of the device has exceeded operational limits
for safe battery charging, and battery charging has been suspended."
::= { batteryBcmAlarms 2 }
bcmAlarmTempBadPowerReduced OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The temperature of the device has exceeded operational limits,
and the device has been placed in low power mode in an to attempt
to reduce heat production."
::= { batteryBcmAlarms 3 }
bcmAlarmBatteryMissing OBJECT-IDENTITY
STATUS current
DESCRIPTION
"There are no batteries installed in the device and the device will
not be capable of sustaining power in the event of utility power
loss."
::= { batteryBcmAlarms 4 }
bcmAlarmTempBadDischargeInhibited OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The temperature of the device has exceeded operational limits
for safe battery discharging, and battery discharging has been
inhibited."
::= { batteryBcmAlarms 5 }
bcmAlarmHardwareFault OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that a hardware fault that is enabled in battChargerHardwareFaultsAllowed
has been detected in battChargerHardwareFaultsDetected (i.e. the logical AND
of these two objects is non-zero)."
::= { batteryBcmAlarms 6 }
bcmAlarmLowPower OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the system has been placed into low power mode in order
to extend battery life."
::= { batteryBcmAlarms 7 }
batteryThermalMgmt OBJECT IDENTIFIER ::= { batteryMgmt 5 }
batteryThermalSensorTable OBJECT-TYPE
SYNTAX SEQUENCE OF BatteryThermalSensorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of thermal sensors present on the system."
::= { batteryThermalMgmt 1 }
batteryThermalSensorEntry OBJECT-TYPE
SYNTAX BatteryThermalSensorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing a single thermal sensor."
INDEX { battThermalSensorType, battThermalSensorIndex }
::= { batteryThermalSensorTable 1 }
BatteryThermalSensorEntry ::=
SEQUENCE {
battThermalSensorType INTEGER,
battThermalSensorIndex Integer32,
battThermalSensorDescription DisplayString,
battThermalSensorTemperature Integer32
}
battThermalSensorType OBJECT-TYPE
SYNTAX INTEGER {
batteryPackSensor(1),
boardLevelTemperatureSensor(2),
thermalShutdownControllerSensor(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the type of this thermal sensor."
::= { batteryThermalSensorEntry 1 }
battThermalSensorIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the instance number of this thermal sensor."
::= { batteryThermalSensorEntry 2 }
battThermalSensorDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of this thermal sensor."
::= { batteryThermalSensorEntry 3 }
battThermalSensorTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature as reported by this thermal sensor."
::= { batteryThermalSensorEntry 4 }
END