WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

initial commit; version 22.5.12042

Browse Source
This commit is contained in:
Chris Hammer
2022-12-12 23:28:25 -05:00
commit af1b03d79f
17653 changed files with 22692970 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

662
mibs/allied-old/AT-FILEv2-MIB Normal file
View File

@ -0,0 +1,662 @@
-- ============================================================================
-- AT-FILEv2.MIB, Allied Telesis enterprise MIB:
-- File MIB for the AlliedWare Plus(tm) operating system
--
-- Copyright (c) 2008 by Allied Telesis, Inc.
-- All rights reserved.
--
-- ============================================================================
AT-FILEv2-MIB DEFINITIONS ::= BEGIN
IMPORTS
modules
FROM AT-SMI-MIB
IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.207.8.4.4.4.600
atFilev2 MODULE-IDENTITY
LAST-UPDATED "200809240000Z" -- September 24, 2008 at 00:00 GMT
ORGANIZATION
"Allied Telesis Labs New Zealand"
CONTACT-INFO
"http://www.alliedtelesis.com"
DESCRIPTION
"The AT File v2 MIB, for listing file contents of flash, nvs
and sd-cards on local and stacked devices, and copying, moving
and deleting files from local, stacked and remote sources."
REVISION "200809240000Z" -- September 24, 2008 at 00:00 GMT
DESCRIPTION
"Initial revision."
::= { modules 600 }
--
-- Node definitions
--
-- ---------------------------------------------------------- --
-- The options objects
-- ---------------------------------------------------------- --
-- 1.3.6.1.4.1.207.8.4.4.4.600.1
atFilev2TableOptions OBJECT IDENTIFIER::= { atFilev2 1 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.1.1
atFilev2Recursive OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of '1' to enable recursive listing of directories
in the atFilev2Table listing."
DEFVAL { 0 }
::= { atFilev2TableOptions 1 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.1.2
atFilev2AllFiles OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of '1' to enable listing of all files (including
hidden etc) in the atFilev2Table listing."
DEFVAL { 0 }
::= { atFilev2TableOptions 2 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.1.3
atFilev2Device OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value that corresponds with the various devices listed
below:
1. Flash (default)
2. Card
3. NVS
Subsequent SNMP queries to the atFilev2Table will use this as
the device to generate a file listing from."
DEFVAL { 1 }
::= { atFilev2TableOptions 3 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.1.4
atFilev2StackID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set an integer to correspond to the stack ID of a stack
member.
Subsequent SNMP queries to the atFilev2Table will use this as
the stack member to generate a file listing from.
If running a stand-alone unit, use the default value of 1."
DEFVAL { 1 }
::= { atFilev2TableOptions 4 }
-- ---------------------------------------------------------- --
-- The file table
-- ---------------------------------------------------------- --
-- 1.3.6.1.4.1.207.8.4.4.4.600.2
atFilev2Table OBJECT-TYPE
SYNTAX SEQUENCE OF AtFilev2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of files present on the device and stack-member
specified by the atFilev2Device and atFilev2StackID objects."
::= { atFilev2 2 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.2.1
atFilev2Entry OBJECT-TYPE
SYNTAX AtFilev2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the list of files containing information about a
single file."
INDEX { atFilev2Filename }
::= { atFilev2Table 1 }
AtFilev2Entry ::=
SEQUENCE {
atFilev2Filename
OCTET STRING,
atFilev2FileSize
Integer32,
atFilev2FileCreationTime
OCTET STRING,
atFilev2FileAttribs
OCTET STRING
}
-- 1.3.6.1.4.1.207.8.4.4.4.600.2.1.1
atFilev2Filename OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the file. Files are sorted in alphabetical order.
Directory names end with / and have a 'd' present in the
atFilev2FileAttribs object.
The filename is truncated at 112 characters due to SNMP OID
length limitations. If two files are not uniquely
distinguishable within the first 112 characters, the listing
will halt after the first file."
::= { atFilev2Entry 1 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.2.1.2
atFilev2FileSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the file in bytes."
::= { atFilev2Entry 2 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.2.1.3
atFilev2FileCreationTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"File creation time in the form <MMM DD YYYY HH:MM:SS>.
Eg: Sep 7 2008 06:07:54."
::= { atFilev2Entry 3 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.2.1.4
atFilev2FileAttribs OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard file accessibility attributes in the form <drwx>.
d - directory
r - readable
w - writeable
x - executable
If a file does not have a particular attribute set, the
respective position will contain a -. For example, <-r-x>
indicates a readable and executable file that is not a
directory or writeable."
::= { atFilev2Entry 4 }
-- ---------------------------------------------------------- --
-- The file operation objects
-- ---------------------------------------------------------- --
-- 1.3.6.1.4.1.207.8.4.4.4.600.3
atFilev2FileOperation OBJECT IDENTIFIER::= { atFilev2 3 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.1
atFilev2SourceStackID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set an integer corresponding to the stack ID of the stack
member to use as the source. This value is ignored if the
source device is set to TFTP.
If running a stand-alone unit, use the default value of 1."
::= { atFilev2FileOperation 1 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.2
atFilev2SourceDevice OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set an integer that corresponds with a device found below:
0. Unconfigured (not settable)
1. Flash
2. Card
3. NVS
4. TFTP
For copying, you may use any combination of devices for the
source and destination except for copying from TFTP to TFTP.
For moving files you cannot use TFTP as source or destination.
For deleting, the source cannot be TFTP.
To copy a file from TFTP to flash, use 4 for source and 1 for
destination.
You must fully configure all required parameters for each
device. Only TFTP has an IP address required."
DEFVAL { '1'b }
::= { atFilev2FileOperation 2 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.3
atFilev2SourceFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filename of the source file to copy, move or delete.
Include any path as required, but the storage type is not
necessary. Setting a null string will return an error.
For example, to copy the file latest.cfg from the
backupconfigs/routers directory on the TFTP server, you would
set:
backupconfigs/routers/latest.cfg"
::= { atFilev2FileOperation 3 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.4
atFilev2DestinationStackID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set an integer corresponding to the stack ID of the stack
member to use as the destination. This value is ignored if the
destination device is set to TFTP, or if a deletion operation
is carried out.
If running a stand-alone unit, use the default value of 1."
::= { atFilev2FileOperation 4 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.5
atFilev2DestinationDevice OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set an integer that corresponds with a device found below:
0. Unconfigured (not settable)
1. Flash
2. Card
3. NVS
4. TFTP
For copying, you may use any combination of devices for the
source and destination except for copying from TFTP to TFTP.
For moving files you cannot use TFTP as source or destination.
For deleting, the destination source is ignored.
To copy a file from TFTP to flash, use 4 for source and 1 for
destination.
You must fully configure all required parameters for each
device. Only TFTP has an IP address required."
DEFVAL { '1'b }
::= { atFilev2FileOperation 5 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.6
atFilev2DestinationFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination filename of the file to copy or move. Include
any path as required, but the storage type is not necessary.
For any operation other than a file deletion, setting a null
string will return an error. For deletions, any value set to
this object is ignored.
Note: If the destination is set to flash, card or nvs, any file
at the destination that shares the destination filename will be
overwritten by a move or copy operation.
The destination filename does not need to be the same as the
source filename.
For example, to copy a release file from the TFTP server to the
local flash into the backuprelease directory, you would set:
backuprelease/latest.rel"
::= { atFilev2FileOperation 6 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.7
atFilev2CopyBegin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A read on this object can return several possible values,
depending on the current status of the system and the
various file operation objects:
idle There is no file operation
in progress and all required
objects have been set
correctly. Setting a '1' to
this object will begin the
file copy.
Error codes: [1-7] A copy operation cannot be
started until these errors
are resolved. See below for
key.
[action]ing x [--> y] A file operation is
currently in progress. You
cannot start another
operation while the object
is returning this value.
[action] x [--> y] success The last copy, move or
delete operation was
successfully completed.
[action] x [--> y] failure: [err] The last copy, move or
delete operation failed,
with the error message
attached. Common failures
include lack of space on the
destination file system,
incorrect source file names
or communication errors with
remote services.
Upon reading a success or failure message, the message will be
cleared and the next read will result in either an 'idle'
message or an 'Error codes' message if not all required objects
have been correctly set. If the read returned 'idle', a new
file operation can now be started.
Error codes for file copy:
1 - atFilev2SourceDevice has not been set
2 - atFilev2SourceFilename has not been set
3 - atFilev2DestinationDevice has not been set
4 - atFilev2DestinationFilename has not been set
5 - atFilev2SourceDevice and atFilev2DestinationDevice are both
set to TFTP
6 - the combination of source device, stackID and filename is
the same as the destination device, stackID and filename
(i.e. it is not valid to copy a file onto itself.
7 - TFTP IP address has not been set and TFTP has been set for
one of the devices
Provided all above requirements are met, immediately upon
executing the SNMP set, the device will indicate that it was a
success. The actual file copy itself will be started and
continue on the device until it has completed. For large files,
operations can take several minutes to complete.
Subsequent reads of the object will return one of messages
shown in the first table, to allow for tracking of the progress
of the copy operation."
::= { atFilev2FileOperation 7 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.8
atFilev2MoveBegin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A read on this object can return several possible values,
depending on the current status of the system and the various
file operation objects:
idle There is no file operation
in progress and all required
objects have been set
correctly. Setting a '1' to
this object will begin the
file move.
Error codes: [1-6] A move operation cannot be
started until these errors
are resolved. See below for
key.
[action]ing x [--> y] A file operation is
currently in progress. You
cannot start another
operation while the object
is returning this value.
[action] x [--> y] success The last copy, move or
delete operation was
successfully completed.
[action] x [--> y] failure: [err] The last copy, move or
delete operation failed,
with the error message
attached. Common failures
include lack of space on the
destination file system,
incorrect source file names
or communication errors with
remote services.
Upon reading a success or failure message, the message will be
cleared and the next read will result in either an 'idle'
message or an 'Error codes' message if not all required objects
have been correctly set. If the read returned 'idle', a new
file operation can now be started.
Error codes for file move:
1 - atFilev2SourceDevice has not been set
2 - atFilev2SourceFilename has not been set
3 - atFilev2DestinationDevice has not been set
4 - atFilev2DestinationFilename has not been set
5 - either atFilev2SourceDevice or atFilev2DestinationDevice
are set to TFTP
6 - the combination of source device, stackID and filename is
the same as the destination device, stackID and filename
(i.e. it is not valid to move a file onto itself.
Provided all above requirements are met, immediately upon
executing the SNMP set, the device will indicate that it was a
success. The actual file move itself will be started and
continue on the device until it has completed. For large files,
operations can take several minutes to complete.
Subsequent reads of the object will return one of messages
shown in the first table, to allow for tracking of the progress
of the move operation."
::= { atFilev2FileOperation 8 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.9
atFilev2DeleteBegin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A read on this object can return several possible values,
depending on the current status of the system and the various
file operation objects:
idle There is no file operation
in progress and all required
objects have been set
correctly. Setting a '1' to
this object will begin the
file deletion.
Error codes: [1-3] A delete operation cannot be
started until these errors
are resolved. See below for
key.
[action]ing x [--> y] A file operation is
currently in progress. You
cannot start another
operation while the object
is returning this value.
[action] x [--> y] success The last copy, move or
delete operation was
successfully completed.
[action] x [--> y] failure: [err] The last copy, move or
delete operation failed,
with the error message
attached. Common failures
include lack of space on the
destination file system,
incorrect source file names
or communication errors with
remote services.
Upon reading a success or failure message, the message will be
cleared and the next read will result in either an 'idle'
message or an 'Error codes' message if not all required objects
have been correctly set. If the read returned 'idle', a new
file operation can now be started.
File deletion operations ignore the values set in the
atFilev2DestinationStackID, atFilev2DestinationDevice and
atFilev2DestinationFilename objects.
The file deletion operation is equivalent to the CLI 'delete
force [file]' command, so it is possible to delete any
normally-protected system files, such as the currently
configured boot release.
Error codes for file deletion:
1 - atFilev2SourceDevice has not been set
2 - atFilev2SourceFilename has not been set
3 - atFilev2SourceDevice has been set to TFTP
Provided all above requirements are met, immediately upon
executing the SNMP set, the device will indicate that it was a
success. The actual file deletion itself will be started and
continue on the device until it has completed. For large files,
operations can take several minutes to complete.
Subsequent reads of the object will return one of messages
shown in the first table, to allow for tracking of the progress
of the delete operation."
::= { atFilev2FileOperation 9 }
-- Begin file operation devices.
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.10
atFilev2Flash1 OBJECT IDENTIFIER::= { atFilev2FileOperation 10 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.11
atFilev2Card2 OBJECT IDENTIFIER::= { atFilev2FileOperation 11 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.12
atFilev2Nvs3 OBJECT IDENTIFIER::= { atFilev2FileOperation 12 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.13
atFilev2Tftp4 OBJECT IDENTIFIER::= { atFilev2FileOperation 13 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.3.13.1
atFilev2TftpIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the TFTP server that is to be used for the
file copy process. This IP address needs to be reachable from
the device or the file copy will fail."
::= { atFilev2Tftp4 1 }
-- End file operation devices.
-- ---------------------------------------------------------- --
-- The SD Card Table
-- ---------------------------------------------------------- --
-- 1.3.6.1.4.1.207.8.4.4.4.600.4
atFilev2SDcardTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtFilev2SDcardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about SD cards."
::= { atFilev2 4 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.4.1
atFilev2SDcardEntry OBJECT-TYPE
SYNTAX AtFilev2SDcardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data pertaining to an SD card instance."
INDEX { atFilev2SDcardStackMemberId }
::= { atFilev2SDcardTable 1 }
AtFilev2SDcardEntry ::=
SEQUENCE
{
atFilev2SDcardStackMemberId
Unsigned32,
atFilev2SDcardPresence
INTEGER
}
-- 1.3.6.1.4.1.207.8.4.4.4.600.4.1.1
atFilev2SDcardStackMemberId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the stack member hosting this SD card."
::= { atFilev2SDcardEntry 1 }
-- 1.3.6.1.4.1.207.8.4.4.4.600.4.1.2
atFilev2SDcardPresence OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
present(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not an SD card is inserted
into a slot."
::= { atFilev2SDcardEntry 2 }
-- Add any new devices to the bottom as required.
END
--
-- at-filev2.mib
--