Commit version 24.12.13800
This commit is contained in:
601
mibs/zte/ZX-PWE3-EXT-MIB
Normal file
601
mibs/zte/ZX-PWE3-EXT-MIB
Normal file
@ -0,0 +1,601 @@
|
||||
ZX-PWE3-EXT-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
TEXTUAL-CONVENTION, MacAddress, RowStatus,
|
||||
DisplayString, TruthValue FROM SNMPv2-TC -- [RFC2579]
|
||||
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,Integer32 FROM SNMPv2-SMI -- [RFC2578]
|
||||
InterfaceIndexOrZero FROM IF-MIB
|
||||
InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- [RFC4001]
|
||||
IANAPwPsnTypeTC FROM ZX-PWE3-MIB
|
||||
zxAnCesMib FROM ZTE-MASTER-MIB
|
||||
zxPwIndex FROM ZXPW-STD-MIB;
|
||||
|
||||
zxPwe3ExtMib MODULE-IDENTITY
|
||||
LAST-UPDATED "200905150000Z" -- May 15, 2009
|
||||
ORGANIZATION "Zhongxing Telcom Co. Ltd."
|
||||
CONTACT-INFO "Zhongxing Telcom Co. Ltd.
|
||||
E-mail: info@mail.zte.com.cn
|
||||
http : www.zte.com.cn or www.zhongxing.com"
|
||||
DESCRIPTION
|
||||
"This MIB module defines PWE3 managed objects as extension of PWE3 standard MIB modules from IETF."
|
||||
|
||||
::= { zxAnCesMib 21 }
|
||||
|
||||
zxPwe3ExtObjects OBJECT IDENTIFIER ::= { zxPwe3ExtMib 1 }
|
||||
zxPwe3ExtTrapObjects OBJECT IDENTIFIER ::= { zxPwe3ExtMib 2 }
|
||||
|
||||
zxPwe3ExtGlobalObjects OBJECT IDENTIFIER ::= { zxPwe3ExtObjects 1 }
|
||||
|
||||
-- Textual conventions
|
||||
PwVcIDType ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Pseudo-Wire Identifier. Used to identify the PW
|
||||
(together with some other fields) in the signaling
|
||||
session. Zero if the PW is set-up manually."
|
||||
SYNTAX Unsigned32
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
-- Following objects are defined.
|
||||
-- 1.PWE3 Golbal Objects
|
||||
-- 2.PWE3 PW Extended Table
|
||||
-- 3.PWE3 MPLS Extended Table
|
||||
-- 4.PWE3 PW Label Table
|
||||
-- 5.PWE3 PW IP Head Table
|
||||
-- 6.PWE3 PW ATM Extended Table
|
||||
-- 7.PWE3 PW QoS Table
|
||||
-- 8.PWE3 PW Clock Table
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 1.PWE3 Golbal Objects
|
||||
--------------------------------------------------------------------------------
|
||||
zxPwe3ExtCesMode OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
ces(1),
|
||||
pwe3(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The CES work mode."
|
||||
DEFVAL{ 1 }
|
||||
::= { zxPwe3ExtGlobalObjects 1 }
|
||||
|
||||
zxPwe3ExtCesIp1Type OBJECT-TYPE
|
||||
SYNTAX InetAddressType
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The type of CES IP address 1."
|
||||
DEFVAL{ 1 }
|
||||
::= { zxPwe3ExtGlobalObjects 2 }
|
||||
|
||||
zxPwe3ExtCesIp1 OBJECT-TYPE
|
||||
SYNTAX InetAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"CES IP address 1. When creating a pseudowire, the source IP must be zxPwe3ExtCesIp1 or zxPwe3ExtCesIp2."
|
||||
::= { zxPwe3ExtGlobalObjects 3 }
|
||||
|
||||
zxPwe3ExtCesIp2Type OBJECT-TYPE
|
||||
SYNTAX InetAddressType
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The type of CES IP address 2."
|
||||
DEFVAL{ 1 }
|
||||
::= { zxPwe3ExtGlobalObjects 4 }
|
||||
|
||||
zxPwe3ExtCesIp2 OBJECT-TYPE
|
||||
SYNTAX InetAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"CES IP address 2. When creating a pseudowire, the source IP must be zxPwe3ExtCesIp1 or zxPwe3ExtCesIp2."
|
||||
::= { zxPwe3ExtGlobalObjects 5 }
|
||||
|
||||
zxPwe3ExtCesMac1 OBJECT-TYPE
|
||||
SYNTAX MacAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"CES MAC address 1. When creating a pseudowire, the source MAC must be zxPwe3ExtCesMac1 or zxPwe3ExtCesMac2."
|
||||
::= { zxPwe3ExtGlobalObjects 6 }
|
||||
|
||||
zxPwe3ExtCesMac2 OBJECT-TYPE
|
||||
SYNTAX MacAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"CES MAC address 2. When creating a pseudowire, the source MAC must be zxPwe3ExtCesMac1 or zxPwe3ExtCesMac2."
|
||||
::= { zxPwe3ExtGlobalObjects 7 }
|
||||
|
||||
zxPwe3ExtCesMinUdpPort OBJECT-TYPE
|
||||
SYNTAX INTEGER(0..65535)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The minimum UDP port. When creating a pseudowire, the UDP port must between zxPwe3ExtCesMinUdpPort and zxPwe3ExtCesMaxUdpPort."
|
||||
::= { zxPwe3ExtGlobalObjects 8 }
|
||||
|
||||
zxPwe3ExtCesMaxUdpPort OBJECT-TYPE
|
||||
SYNTAX INTEGER(0..65535)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum UDP port. When creating a pseudowire, the UDP port must between zxPwe3ExtCesMinUdpPort and zxPwe3ExtCesMaxUdpPort."
|
||||
::= { zxPwe3ExtGlobalObjects 9 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 2.PWE3 PW Extended Table
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
zxPwe3ExtPwTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxPwe3ExtPwEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table controls pseudowire extended parameters."
|
||||
::= { zxPwe3ExtObjects 2 }
|
||||
|
||||
zxPwe3ExtPwEntry OBJECT-TYPE
|
||||
SYNTAX ZxPwe3ExtPwEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents extended parameters of a pseudowire (PW). The row is created
|
||||
automatically by the local agent. It is indexed by zxPwIndex, which uniquely identifying a singular PW.
|
||||
Manual entries in this table SHOULD be preserved after a reboot, the agent MUST ensure the integrity of those entries."
|
||||
INDEX { zxPwIndex }
|
||||
::= { zxPwe3ExtPwTable 1 }
|
||||
|
||||
ZxPwe3ExtPwEntry ::= SEQUENCE {
|
||||
zxPwe3ExtPwSrcIpType InetAddressType,
|
||||
zxPwe3ExtPwSrcIp InetAddress,
|
||||
zxPwe3ExtPwSrcMac MacAddress
|
||||
}
|
||||
|
||||
zxPwe3ExtPwSrcIpType OBJECT-TYPE
|
||||
SYNTAX InetAddressType
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The pseudowire source IP address type."
|
||||
DEFVAL{ 1 }
|
||||
::= { zxPwe3ExtPwEntry 1 }
|
||||
|
||||
zxPwe3ExtPwSrcIp OBJECT-TYPE
|
||||
SYNTAX InetAddress
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The pseudowire source IP address."
|
||||
::= { zxPwe3ExtPwEntry 2 }
|
||||
|
||||
zxPwe3ExtPwSrcMac OBJECT-TYPE
|
||||
SYNTAX MacAddress
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The pseudowire source MAC address."
|
||||
REFERENCE
|
||||
"Used by MAP"
|
||||
::= { zxPwe3ExtPwEntry 3 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 3.PWE3 MPLS Extended Table
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
zxPwMplsExtTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxPwMplsExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table controls MPLS specific parameters when the PW is
|
||||
going to be carried over MPLS PSN."
|
||||
::= { zxPwe3ExtObjects 3 }
|
||||
|
||||
zxPwMplsExtEntry OBJECT-TYPE
|
||||
SYNTAX ZxPwMplsExtEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents parameters specific to MPLS
|
||||
PSN for a pseudowire (PW). The row is created
|
||||
automatically by the local agent if the zxPwPsnType is
|
||||
mpls(1). It is indexed by zxPwIndex, which uniquely
|
||||
identifying a singular PW.
|
||||
Manual entries in this table SHOULD be preserved after a
|
||||
reboot, the agent MUST ensure the integrity of those
|
||||
entries.
|
||||
If the set of entries of a specific row were found to be
|
||||
non consistent after reboot, the PW pwOperStatus MUST be
|
||||
declared as down(2).
|
||||
Any read-write object in this table MAY be changed at any
|
||||
time, however change of some objects (for example
|
||||
pwMplsMplsType) during PW forwarding state MAY cause traffic
|
||||
disruption."
|
||||
INDEX { zxPwIndex }
|
||||
::= { zxPwMplsExtTable 1 }
|
||||
|
||||
ZxPwMplsExtEntry ::= SEQUENCE {
|
||||
zxPwMplsExtMplsType INTEGER,
|
||||
zxPwMplsExtOutboundTunnelLabel Unsigned32,
|
||||
zxPwMplsExtInboundTunnelLabel Unsigned32,
|
||||
zxPwMplsExtVcID PwVcIDType,
|
||||
zxPwMplsExtControlWord TruthValue,
|
||||
zxPwMplsExtWithSequenceNumber TruthValue
|
||||
}
|
||||
|
||||
zxPwMplsExtMplsType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
static (1),
|
||||
dynamic (2),
|
||||
staticsingle (3)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This variable indicates the MPLS type."
|
||||
::= { zxPwMplsExtEntry 1 }
|
||||
|
||||
zxPwMplsExtOutboundTunnelLabel OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The MPLS Outbound Tunnel Label."
|
||||
::= { zxPwMplsExtEntry 2 }
|
||||
|
||||
zxPwMplsExtInboundTunnelLabel OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The MPLS Inbound Tunnel Label."
|
||||
::= { zxPwMplsExtEntry 3 }
|
||||
|
||||
zxPwMplsExtVcID OBJECT-TYPE
|
||||
SYNTAX PwVcIDType
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Used in the outgoing VC ID field within the 'Virtual
|
||||
Circuit FEC Element' when LDP signaling is used or PW ID
|
||||
AVP for L2TP."
|
||||
REFERENCE
|
||||
"Martini, et al, <draft-martini-l2circuit-trans-mpls>.
|
||||
and So, et al, <draft-so-pwe3-ethernet>.
|
||||
Note: as specified in l2circuit-trans: It is REQUIRED to
|
||||
assign the same VC ID, and VC type for a given circuit in
|
||||
both directions."
|
||||
::= { zxPwMplsExtEntry 4 }
|
||||
|
||||
zxPwMplsExtControlWord OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Define if the control word will be sent with each packet by
|
||||
the local node."
|
||||
REFERENCE
|
||||
"Martini, et al, <draft-martini-l2circuit-trans-mpls>"
|
||||
DEFVAL
|
||||
{ false }
|
||||
::= { zxPwMplsExtEntry 5 }
|
||||
|
||||
zxPwMplsExtWithSequenceNumber OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Define if the sequence number will be sent with each packet by
|
||||
the local node."
|
||||
DEFVAL
|
||||
{ false }
|
||||
::= { zxPwMplsExtEntry 6 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 4.PWE3 PW Label Table
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
zxPwe3ExtPwLabelTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxPwe3ExtPwLabelEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table controls pseudowire labels which have been used."
|
||||
::= { zxPwe3ExtObjects 4 }
|
||||
|
||||
zxPwe3ExtPwLabelEntry OBJECT-TYPE
|
||||
SYNTAX ZxPwe3ExtPwLabelEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents pseudowire labels which have been used."
|
||||
INDEX { zxPwe3ExtPwPsnType, zxPwe3ExtPwLabelIndex}
|
||||
::= { zxPwe3ExtPwLabelTable 1 }
|
||||
|
||||
ZxPwe3ExtPwLabelEntry ::= SEQUENCE {
|
||||
zxPwe3ExtPwPsnType IANAPwPsnTypeTC,
|
||||
zxPwe3ExtPwLabelIndex Integer32,
|
||||
zxPwe3ExtPwLabel DisplayString
|
||||
}
|
||||
|
||||
zxPwe3ExtPwPsnType OBJECT-TYPE
|
||||
SYNTAX IANAPwPsnTypeTC
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The PSN type."
|
||||
::= { zxPwe3ExtPwLabelEntry 1 }
|
||||
|
||||
zxPwe3ExtPwLabelIndex OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Index of the pseudowire labels which have been used."
|
||||
::= { zxPwe3ExtPwLabelEntry 2 }
|
||||
|
||||
zxPwe3ExtPwLabel OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The pseudowire labels which have been used."
|
||||
::= { zxPwe3ExtPwLabelEntry 3 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 5.PWE3 PW IP Head Table
|
||||
--------------------------------------------------------------------------------
|
||||
zxPwExtIpHeadTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxPwExtIpHeadEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table controls IP head parameters of a pseudowire."
|
||||
::= { zxPwe3ExtObjects 5 }
|
||||
|
||||
zxPwExtIpHeadEntry OBJECT-TYPE
|
||||
SYNTAX ZxPwExtIpHeadEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents IP head parameters of a pseudowire."
|
||||
INDEX { zxPwIndex }
|
||||
::= { zxPwExtIpHeadTable 1 }
|
||||
|
||||
ZxPwExtIpHeadEntry ::= SEQUENCE {
|
||||
zxPwExtIpTos INTEGER,
|
||||
zxPwExtIpTtl INTEGER,
|
||||
zxPwExtIpDf INTEGER
|
||||
}
|
||||
|
||||
zxPwExtIpTos OBJECT-TYPE
|
||||
SYNTAX INTEGER(0..256)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Type of service. 256 means using the original TOS value."
|
||||
DEFVAL{ 1 }
|
||||
::= { zxPwExtIpHeadEntry 1 }
|
||||
|
||||
zxPwExtIpTtl OBJECT-TYPE
|
||||
SYNTAX INTEGER(0..255)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Time to live."
|
||||
DEFVAL{ 255 }
|
||||
::= { zxPwExtIpHeadEntry 2 }
|
||||
|
||||
zxPwExtIpDf OBJECT-TYPE
|
||||
SYNTAX INTEGER(0..1)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Don't Fragment."
|
||||
::= { zxPwExtIpHeadEntry 3 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 6.PWE3 PW ATM Extended Table
|
||||
--------------------------------------------------------------------------------
|
||||
zxAnPwAtmExtCfgTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxAnPwAtmExtCfgEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table specifies extended information for an ATM PW
|
||||
to be carried over PSN in any mode."
|
||||
::= { zxPwe3ExtObjects 6 }
|
||||
|
||||
zxAnPwAtmExtCfgEntry OBJECT-TYPE
|
||||
SYNTAX ZxAnPwAtmExtCfgEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains a set of extended parameters for
|
||||
the ATM PW that needs to be adapted and carried
|
||||
over the PSN. This table is indexed by zxPwIndex from
|
||||
zxPwTable. An entry is created for every new ATM
|
||||
type associated zxPwIndex in the zxPwTable. Unless
|
||||
otherwise specified, all read-write objects in
|
||||
this table MAY be changed when the PW is defined
|
||||
as not active, and all RW objects values must
|
||||
persist after reboot."
|
||||
INDEX { zxPwIndex }
|
||||
::= { zxAnPwAtmExtCfgTable 1 }
|
||||
|
||||
ZxAnPwAtmExtCfgEntry ::= SEQUENCE {
|
||||
zxAnPwAtmExtTransmitTimeout Integer32
|
||||
}
|
||||
|
||||
zxAnPwAtmExtTransmitTimeout OBJECT-TYPE
|
||||
SYNTAX Integer32 (50..4095)
|
||||
UNITS "microseconds"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A packet can be transmitted to the PSN based on timeout expiration
|
||||
for collecting cells. "
|
||||
DEFVAL { 50 }
|
||||
::= { zxAnPwAtmExtCfgEntry 1 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 7.PWE3 PW QoS Table
|
||||
--------------------------------------------------------------------------------
|
||||
zxAnPwQosTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxAnPwQosEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PW QoS table."
|
||||
::= { zxPwe3ExtObjects 7 }
|
||||
|
||||
zxAnPwQosEntry OBJECT-TYPE
|
||||
SYNTAX ZxAnPwQosEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"PW QoS entry."
|
||||
INDEX { zxPwIndex }
|
||||
::= { zxAnPwQosTable 1 }
|
||||
|
||||
ZxAnPwQosEntry ::= SEQUENCE {
|
||||
zxAnPwQosCir Integer32,
|
||||
zxAnPwQosCbs Integer32,
|
||||
zxAnPwQosCirRemarkCos Integer32,
|
||||
zxAnPwQosPir Integer32,
|
||||
zxAnPwQosPbs Integer32,
|
||||
zxAnPwQosPirRemarkCos Integer32,
|
||||
zxAnPwQosRowStatus RowStatus
|
||||
}
|
||||
|
||||
zxAnPwQosCir OBJECT-TYPE
|
||||
SYNTAX Integer32(64..65535)
|
||||
UNITS "kbps"
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Committed information rate. "
|
||||
::= { zxAnPwQosEntry 1 }
|
||||
|
||||
zxAnPwQosCbs OBJECT-TYPE
|
||||
SYNTAX Integer32(64..65535)
|
||||
UNITS "kbytes"
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Committed burst size. "
|
||||
::= { zxAnPwQosEntry 2 }
|
||||
|
||||
zxAnPwQosCirRemarkCos OBJECT-TYPE
|
||||
SYNTAX Integer32(0..7|255)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"CoS remark value for traffic lower than CIR.
|
||||
The value 255 indicates that no remark CoS is configured."
|
||||
::= { zxAnPwQosEntry 3 }
|
||||
|
||||
zxAnPwQosPir OBJECT-TYPE
|
||||
SYNTAX Integer32(64..65535)
|
||||
UNITS "kbps"
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Peak information rate. "
|
||||
::= { zxAnPwQosEntry 4 }
|
||||
|
||||
zxAnPwQosPbs OBJECT-TYPE
|
||||
SYNTAX Integer32(64..65535)
|
||||
UNITS "kbytes"
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Peak burst size. "
|
||||
::= { zxAnPwQosEntry 5 }
|
||||
|
||||
zxAnPwQosPirRemarkCos OBJECT-TYPE
|
||||
SYNTAX Integer32(0..7|255)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"CoS remark value for traffic lower than PCR and higher than
|
||||
CIR.
|
||||
The value 255 indicates that no remark CoS is configured."
|
||||
::= { zxAnPwQosEntry 6 }
|
||||
|
||||
zxAnPwQosRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The row status of this entry."
|
||||
::= {zxAnPwQosEntry 20 }
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
-- 8.PWE3 PW Clock Table
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
zxAnPwClockTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ZxAnPwClockEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Pseudo-wire clock table."
|
||||
::= { zxPwe3ExtObjects 8 }
|
||||
|
||||
zxAnPwClockEntry OBJECT-TYPE
|
||||
SYNTAX ZxAnPwClockEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Pseudo-wire clock table entry."
|
||||
INDEX { zxPwIndex }
|
||||
::= { zxAnPwClockTable 1 }
|
||||
|
||||
ZxAnPwClockEntry ::= SEQUENCE {
|
||||
zxAnPwClockStatus INTEGER,
|
||||
zxAnPwClockOffset Integer32
|
||||
}
|
||||
|
||||
zxAnPwClockStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
freeRun(1),
|
||||
holdOver(2),
|
||||
acquiring(3),
|
||||
acquired(4),
|
||||
notReady(5)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Pseudo wire clock status.
|
||||
freeRun(1) - Pseudo-wire clock could not be acquired and in free
|
||||
status.
|
||||
holdOver(2) - Pseudo-wire could not acquire clock, and hold
|
||||
current clock
|
||||
for a while.
|
||||
acquiring(3) - Pseudo-wire clock is being acquired.
|
||||
acquired(4) - Pseudo-wire clock has been acquired.
|
||||
notReady(5) - Pseudo-wire is not ready to established and clock
|
||||
is in this status.
|
||||
"
|
||||
::= { zxAnPwClockEntry 1 }
|
||||
|
||||
zxAnPwClockOffset OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "ppb"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Pseudo-wire clock offset.
|
||||
The unit is ppb(part per billion)."
|
||||
::= {zxAnPwClockEntry 2 }
|
||||
END
|
||||
Reference in New Issue
Block a user