WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

Commit version 24.12.13800

Browse Source
This commit is contained in:
Chris Hammer
2025-01-06 17:35:06 -05:00
parent b7f6a79c2c
commit 55d9218816
6133 changed files with 4239740 additions and 1374287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

399
mibs/zte/ZTE-AN-UAPS-MIB Normal file
View File

@ -0,0 +1,399 @@
ZTE-AN-UAPS-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION,RowStatus, DisplayString,MacAddress,TruthValue FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, enterprises, Integer32,NOTIFICATION-TYPE FROM SNMPv2-SMI
ifIndex FROM IF-MIB
zxAn,ZxAnPortList
FROM ZTE-AN-TC-MIB;
zxAnUapsMib MODULE-IDENTITY
LAST-UPDATED "200711281530Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "suchunshan
Mail: suchunshan@zte.com.cn
Tel : 021-68896292"
DESCRIPTION "This MIB defines zte dsl uaps function modules' managed objects."
::= { zxAn 7 }
zxAnUapsObjects OBJECT IDENTIFIER ::= { zxAnUapsMib 1 }
zxAnUapsTraps OBJECT IDENTIFIER ::= { zxAnUapsMib 2 }
--------------------------------------------------------------------------------
-- Following objects are defined.
-- 1.Uaps Group Table
-- 2.Trap
--------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- 1.Uaps Group Table
------------------------------------------------------------------------------
zxAnUapsCapability OBJECT-TYPE
SYNTAX BITS
{
ipLinkChk(0),
protectionTime(1),
supportSlaveSlotPorts(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates that which UAPS funcitons are supported by
current device.
ipLinkChk(1) -- zxAnUapsNextHopIp,zxAnUapsIpLink* are supported.
protectionTime(2) -- zxAnUapsProtectionTime,zxAnUapsIsInPrtctTime,
zxAnUapsSwapRequestInCache,zxAnUapsSwapLastRequest are supported.
supportSlaveSlotPorts(3) -- zxAnUapsSupportSlaveSlotPorts are supported.
"
::= { zxAnUapsObjects 1 }
zxAnUapsGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnUapsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the managed objects of the UAPS group ."
::= { zxAnUapsObjects 2 }
zxAnUapsGroupEntry OBJECT-TYPE
SYNTAX ZxAnUapsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnUapsGroupTable."
INDEX { zxAnUapsGroupIndex }
::= { zxAnUapsGroupTable 1 }
ZxAnUapsGroupEntry ::= SEQUENCE {
zxAnUapsGroupIndex INTEGER,
zxAnUapsGroupName DisplayString,
zxAnUapsPrimaryPortList OBJECT IDENTIFIER,
zxAnUapsSecondaryPortList OBJECT IDENTIFIER,
zxAnUapsAutoFailbackEnable Integer32,
zxAnUapsNextHopIp IpAddress,
zxAnUapsIpLinkType INTEGER,
zxAnUapsIpLinkChkRetries INTEGER,
zxAnUapsIpLinkChkTimeout INTEGER,
zxAnUapsIpLinkStatus INTEGER,
zxAnUapsForceSwap Integer32,
zxAnUapsPortWorkingStatus INTEGER,
zxAnUapsSwapReason INTEGER,
zxAnUapsSupportSlaveSlotPorts INTEGER,
zxAnUapsProtectionTime INTEGER,
zxAnUapsIsInPrtctTime TruthValue,
zxAnUapsSwapRequestInCache BITS,
zxAnUapsSwapLastRequest INTEGER,
zxAnUapsSwapMode INTEGER,
zxAnUapsSecondaryPortLighting INTEGER,
zxAnUapsGroupRowStatus RowStatus
}
zxAnUapsGroupIndex OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of UAPS group.The max numbers of groups is 4.
"
::= { zxAnUapsGroupEntry 1}
zxAnUapsGroupName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1 .. 20 ) )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of UAPS group.
"
::= { zxAnUapsGroupEntry 2}
zxAnUapsPrimaryPortList OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The primary UAPS ports.The max port numbers joined in this portlist
should not be more than 4.
Each number of this variable is ifIndex of a port.
"
::= { zxAnUapsGroupEntry 3}
zxAnUapsSecondaryPortList OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Secondary UAPS ports.The max port numbers joined in this portlist
should not be more than 4. Furthermore, the port numbers joined in
this portlist should be eqaul to the zxAnUapsPrimaryPortList's.
Each number of this variable is ifIndex of a port.
"
::= { zxAnUapsGroupEntry 4}
zxAnUapsAutoFailbackEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable recovery to the UAPS primary port automatically
when the primary port is normal again."
::= { zxAnUapsGroupEntry 5}
zxAnUapsNextHopIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Next Hop Ip.If it is 0.0.0.0, UAPS will not check the link of
Next Hop. "
::= { zxAnUapsGroupEntry 6 }
zxAnUapsIpLinkType OBJECT-TYPE
SYNTAX INTEGER
{
defaulIpLink(1),
serviceIpLink(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The link type used to check ip link status."
::= { zxAnUapsGroupEntry 7}
zxAnUapsIpLinkChkRetries OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The retries of checking link status."
::= { zxAnUapsGroupEntry 8}
zxAnUapsIpLinkChkTimeout OBJECT-TYPE
SYNTAX INTEGER(1..10)
UNITS "sec"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The timeout of checking link status."
::= { zxAnUapsGroupEntry 9}
zxAnUapsIpLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
testing(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of ip link."
::= { zxAnUapsGroupEntry 10}
zxAnUapsForceSwap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Force to swap the primary and secondary port. when it is set to 1."
::= { zxAnUapsGroupEntry 11}
zxAnUapsPortWorkingStatus OBJECT-TYPE
SYNTAX INTEGER
{
primaryPortInWorking(1),
secondaryPortInWorking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates which port group is in working state."
::= { zxAnUapsGroupEntry 12}
zxAnUapsSwapReason OBJECT-TYPE
SYNTAX INTEGER
{
failback(0), -- primary port is recovery
failoverByPhyLinkDown(1), -- primary port is in fault of physical layer
failoverByIpLinkDown(2), -- primary port is in fault of ip layer
forceSwap(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the reason of swap.
NOTE:
BIT 0 is just the MSB of this variable and is NOT the LSB.
"
::= { zxAnUapsGroupEntry 13}
zxAnUapsSupportSlaveSlotPorts OBJECT-TYPE
SYNTAX INTEGER
{
port(1), -- port mode
csc(2) -- csc mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether support to use slave card's ports to act as
Primary-Secondary port.
"
::= { zxAnUapsGroupEntry 14}
zxAnUapsProtectionTime OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protection time of UAPS.When the fail time of port is larger
than it,the UAPS module should failover to the secondary port.
It is only used in uaps mode.
"
DEFVAL { 300 }
::= { zxAnUapsGroupEntry 15}
zxAnUapsIsInPrtctTime OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates if the UAPS is in protect time status. "
::= { zxAnUapsGroupEntry 16}
zxAnUapsSwapRequestInCache OBJECT-TYPE
SYNTAX BITS
{
failback(0), -- primary port is recovery
failoverByPhyLinkDown(1), -- primary port is in fault of physical layer
failoverByIpLinkDown(2), -- primary port is in fault of ip layer
forceSwap(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the swap request in memory. "
::= { zxAnUapsGroupEntry 17}
zxAnUapsSwapLastRequest OBJECT-TYPE
SYNTAX INTEGER
{
failback(0), -- primary port is recovery
failoverByPhyLinkDown(1), -- primary port is in fault of physical layer
failoverByIpLinkDown(2), -- primary port is in fault of ip layer
forceSwap(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates if there is a swap request in memory. "
::= { zxAnUapsGroupEntry 18}
zxAnUapsSwapMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
trunk(2),
upPortNum(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates swap mode.
common: If one port of working port list down, all ports will
swap to slave port list.
trunk: Only when all working ports down, ports will swap to
slave port list.
upPortNum: If the number of up working ports is less than
the number of up slave ports, swap to slave port list. "
::= { zxAnUapsGroupEntry 19}
zxAnUapsSecondaryPortLighting OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable\Disable secondary port lighting control function.
When port lighting control is enabled, port lighting is shutdown."
DEFVAL { disable }
::= { zxAnUapsGroupEntry 20}
zxAnUapsGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Rowstatus to create or delete a row of this entry."
::= { zxAnUapsGroupEntry 25 }
------------------------------------------------------------------------------
-- 2.Trap
------------------------------------------------------------------------------
zxAnUapsSwappedTrap NOTIFICATION-TYPE
OBJECTS {
zxAnUapsPortWorkingStatus,
zxAnUapsSwapReason,
zxAnUapsGroupName,
zxAnUapsPrimaryPortList,
zxAnUapsSecondaryPortList
}
STATUS current
DESCRIPTION
"It indicates the primary and seconday port of UAPS module has swapped."
::= { zxAnUapsTraps 1 }
zxAnUapsSwappedAlm NOTIFICATION-TYPE
OBJECTS {
zxAnUapsPortWorkingStatus,
zxAnUapsSwapReason,
zxAnUapsGroupName,
zxAnUapsPrimaryPortList,
zxAnUapsSecondaryPortList
}
STATUS current
DESCRIPTION
"A zxAnUapsSwappedAlm is sent when the agent has detected that
the master/slave ports of UAPS module have swapped."
::= { zxAnUapsTraps 2 }
zxAnUapsSwappedClr NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnUapsSwappedClr trap is sent when the agent
has detected that the zxAnUapsSwappedAlm is cleared manually."
::= { zxAnUapsTraps 3 }
END