WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

Commit version 24.12.13800

Browse Source
This commit is contained in:
Chris Hammer
2025-01-06 17:35:06 -05:00
parent b7f6a79c2c
commit 55d9218816
6133 changed files with 4239740 additions and 1374287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

635
mibs/zte/ZTE-AN-IMA-MIB Normal file
View File

@ -0,0 +1,635 @@
--------------------------------------------------------------------------
-- File Name : ZTE-AN-IMA-MIB.mib
-- Date : 2007-7-10
-- Author : ZTE Nms dept.
--
-- Zte IMA Mib for DSL
--
--
--------------------------------------------------------------------------
ZTE-AN-IMA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI
RowStatus,DisplayString,TEXTUAL-CONVENTION FROM SNMPv2-TC
--ifIndex, ifAdminStatus,ifOperStatus,ifType FROM IF-MIB
ZxAnIfindex,ZxAnPortList,ZxAnIdList,zxAn FROM ZTE-AN-TC-MIB
;
zxAnImaMib MODULE-IDENTITY
LAST-UPDATED "200707101130Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "ZTE NMS dept.
Su Chunshan 68896292 "
DESCRIPTION "This MIB defines managed objects of AN IMA mgmt."
::= { zxAn 1005 }
zxAnImaObjects OBJECT IDENTIFIER ::= { zxAnImaMib 1 }
zxAnImaTrapObjects OBJECT IDENTIFIER ::= { zxAnImaMib 2 }
--------------------------------------------------------------------------------
-- Following objects are defined.
-- 1.IMA Group
-- 2.IMA Link
--------------------------------------------------------------------------------
-- Textual conventions
ImaLinkState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"State of a link belonging to an IMA group."
REFERENCE
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
SYNTAX INTEGER
{
notInGroup(1),
unusableNoGivenReason(2),
unusableFault(3),
unusableMisconnected(4),
unusableInhibited(5),
unusableFailed(6),
usable(7),
active(8)
}
ImaGroupState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"State of the IMA group."
REFERENCE
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
SYNTAX INTEGER
{
notConfigured(1),
startUp(2),
startUpAck(3),
configAbortUnsupportedM(4),
configAbortIncompatibleSymmetry(5),
configAbortOther(6),
insufficientLinks(7),
blocked(8),
operational(9),
configAbortUnsupportedImaVersion(10)
}
ImaGroupTxClkMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicate the transmit clock mode of the IMA group.
There are two possible modes: the Common Transmit
Clock (CTC) and the Independent Transmit Clock (ITC).
The CTC mode corresponds to the case when the transmit clock
of all IMA links are derived from the same source. The ITC
configuration corresponds to the case where there is at least
one IMA link whose transmit clock is derived from a source
different than at least another link transmit clock."
REFERENCE
"ATM Forum IMA v1.1, Section 7 on page 38"
SYNTAX INTEGER
{
ctc(1),
itc(2)
}
ImaGroupSymmetry ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The group symmetry mode adjusted during the group start-up."
REFERENCE
"ATM Forum IMA v1.1, Section 5.2.2.7 on page 35"
SYNTAX INTEGER
{
symmetricOperation(1),
asymmetricOperation(2),
asymmetricConfiguration(3)
}
ImaFrameLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Length of the IMA frames."
REFERENCE
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
SYNTAX INTEGER
{
m32(32),
m64(64),
m128(128),
m256(256)
}
--------------------------------------------------------------------------------
-- 1.IMA Group
--------------------------------------------------------------------------------
zxAnImaGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnImaGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"xDslImaGroup interface table."
::= { zxAnImaObjects 1 }
zxAnImaGroupEntry OBJECT-TYPE
SYNTAX ZxAnImaGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ima Group interface create entry.It is used to create or remove a
ima goup interface.
NOTE:
zxAnImaLinkGroupIfIndex of zxAnImaLinkTable MUST be set before
creating a IMA group,because IMA group must include one link when it is
created.
So the IMA group creation procedure should be :
1.set zxAnImaLinkGroupIfIndex of zxAnImaLinkTable to the
zxAnImaGroupIfIndex to be created.
2.create the IMA group
"
INDEX { zxAnImaShelf,zxAnImaSlot,zxAnImaGroupIndex }
::= { zxAnImaGroupTable 1 }
ZxAnImaGroupEntry ::= SEQUENCE
{
zxAnImaShelf Integer32,
zxAnImaSlot Integer32,
zxAnImaGroupIndex INTEGER,
zxAnImaGroupConfImaVersion INTEGER,
zxAnImaGroupActualImaVersion INTEGER,
zxAnImaGroupSymmetry ImaGroupSymmetry,
zxAnImaGroupM2SClkMode INTEGER,
zxAnImaGroupNeTxClkMode ImaGroupTxClkMode,
zxAnImaGroupFeTxClkMode ImaGroupTxClkMode,
zxAnImaGroupTxFrameLength ImaFrameLength,
zxAnImaGroupRxFrameLength ImaFrameLength,
zxAnImaGroupAdminStatus INTEGER,
zxAnImaGroupOperstatus INTEGER, -- reserved
zxAnImaGroupNeState ImaGroupState,
zxAnImaGroupFeState ImaGroupState,
zxAnImaGroupDsx1LineType INTEGER,
zxAnImaGroupDsx1LineCoding INTEGER,
zxAnImaGroupDsx1TxClockSource INTEGER,
zxAnImaGroupDsx1IdleCells INTEGER,
zxAnImaGroupDsx1RxScrambling INTEGER,
zxAnImaGroupDsx1TxScrambling INTEGER,
zxAnImaGroupRowStatus RowStatus
}
zxAnImaShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Shelf of IMA card."
::= { zxAnImaGroupEntry 1 }
zxAnImaSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot of IMA card."
::= { zxAnImaGroupEntry 2 }
zxAnImaGroupIndex OBJECT-TYPE
SYNTAX INTEGER(0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IMA Group Index in this IMA card."
::= { zxAnImaGroupEntry 3 }
zxAnImaGroupConfImaVersion OBJECT-TYPE
SYNTAX INTEGER
{
version10(1),-- ima 1.0
version11(2) -- ima 1.1
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured version of Group,ima 1.0 or ima 1.1 ."
DEFVAL { version11 }
::= { zxAnImaGroupEntry 4 }
zxAnImaGroupActualImaVersion OBJECT-TYPE
SYNTAX INTEGER
{
version10(1),-- ima 1.0
version11(2) -- ima 1.1
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The actual version of Group,ima 1.0 or ima 1.1 ."
::= { zxAnImaGroupEntry 5 }
zxAnImaGroupSymmetry OBJECT-TYPE
SYNTAX ImaGroupSymmetry
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Symmetry of the IMA group."
REFERENCE
"ATM Forum IMA v1.1, Section 5.2.2.7 on page 35"
DEFVAL { symmetricOperation }
::= { zxAnImaGroupEntry 6 }
zxAnImaGroupM2SClkMode OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
slave(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The clock mode of master to slave for the Group "
DEFVAL { master }
::= { zxAnImaGroupEntry 7 }
zxAnImaGroupNeTxClkMode OBJECT-TYPE
SYNTAX ImaGroupTxClkMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transmit clocking mode used by the near-end IMA group."
REFERENCE
"ATM Forum IMA v1.1, Section 7 on page 38"
DEFVAL { ctc }
::= { zxAnImaGroupEntry 8 }
zxAnImaGroupFeTxClkMode OBJECT-TYPE
SYNTAX ImaGroupTxClkMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit clocking mode used by the far-end IMA group."
REFERENCE
"ATM Forum IMA v1.1, Section 7 on page 38"
::= { zxAnImaGroupEntry 9 }
zxAnImaGroupTxFrameLength OBJECT-TYPE
SYNTAX ImaFrameLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frame length to be used by the IMA group in the transmit
direction."
REFERENCE
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
DEFVAL { m128 }
::= { zxAnImaGroupEntry 10 }
zxAnImaGroupRxFrameLength OBJECT-TYPE
SYNTAX ImaFrameLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame length to be used by the IMA group in the recieving
direction."
REFERENCE
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
::= { zxAnImaGroupEntry 11 }
zxAnImaGroupAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
reset(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative status of IMA group.
When it is set to reset(3),the agent should reset this IMA group
and then set it to its previous status. "
DEFVAL { up }
::= { zxAnImaGroupEntry 12 }
zxAnImaGroupOperstatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of IMA group."
::= { zxAnImaGroupEntry 13 }
zxAnImaGroupNeState OBJECT-TYPE
SYNTAX ImaGroupState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the near-end IMA Group."
::= { zxAnImaGroupEntry 14 }
zxAnImaGroupFeState OBJECT-TYPE
SYNTAX ImaGroupState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the far-end IMA Group."
::= { zxAnImaGroupEntry 15 }
zxAnImaGroupDsx1LineType OBJECT-TYPE
SYNTAX INTEGER {
--other(1),
dsx1E1(4),
--dsx1E1CRC(5),
dsx1E1MF(6)
--dsx1E1CRCMF(7),
--dsx1E1Unframed(9),
--dsx1Unframed(8),
--dsx1ESF(2),
--dsx1D4(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the variety of E1 Line implementing
this circuit. The type of circuit affects the number of bits
per second that the circuit can reasonably carry, as well as
the interpretation of the usage and error statistics. This
variable is defined in the rfc1406 configuration table as
dsx1LineType.
According to rfc1406, the different values are:
dsx1ESF Extended SuperFrame DS1 (T1.107)
dsx1D4 AT&T D4 format DS1 (T1.107)
dsx1E1 ITU-T Recommendation G.704
(Table 4a)
dsx1E1-CRC ITU-T Recommendation G.704
(Table 4b)
dsxE1-MF G.704 (Table 4a) with TS16
multiframing enabled
dsx1E1-CRC-MF G.704 (Table 4b) with TS16
multiframing enabled
dsx1Unframed DS1 with No Framing
dsx1E1Unframed E1 with No Framing (G.703)"
::= { zxAnImaGroupEntry 16 }
zxAnImaGroupDsx1LineCoding OBJECT-TYPE
SYNTAX INTEGER
{
singleRail(1),
hdb3 (2),
b8zs (3),
ami(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable describes the variety of Zero Code suppression
used on this link, which in turn affects a number of its
characteristics. ami(4) refers to a mode wherein no zero
code suppression is present and the line encoding does not
solve the problem directly. In this application, the higher
layer must provide data which meets or exceeds the pulse
density re-quirements, such as inverting HDLC data. This
variable is defined in the rfc1406 configuration table as
dsx1LineCoding."
DEFVAL { hdb3 }
::= { zxAnImaGroupEntry 17 }
zxAnImaGroupDsx1TxClockSource OBJECT-TYPE
SYNTAX INTEGER {
loopTiming(1),
localTiming(2)
--throughTiming(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source of the transmit clock. loopTiming(1) indicated that
the recovered receive clock is used as the transmit clock.
localTiming(2) indicates that a local source clock is used as
the transmit clock. To determine which local source clock is
used advise the ntGlobalClock in the netmodTimingTable for this
netmod (refer to the Fore-Switch-MIB for more information)."
DEFVAL { localTiming }
::= { zxAnImaGroupEntry 18 }
zxAnImaGroupDsx1IdleCells OBJECT-TYPE
SYNTAX INTEGER {
unassigned(1),
idle(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the types of cells that should be sent
in case there is no real data to send. According to the ATM
Forum, Unassigned cells should be sent (octet 1-3 are 0's,
octet 4 is 0000xxx0, where x is 'don't care'). According to the
CCITT specifications, Idle cells should be sent (everything is
'0' except for the CLP bit which is '1'). By default,
unassigned cells are transmitted is case there is no data to
send."
DEFVAL { unassigned }
::= { zxAnImaGroupEntry 19 }
zxAnImaGroupDsx1RxScrambling OBJECT-TYPE
SYNTAX INTEGER {
descrambling(1),
noDescrambling(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates whether the information is being
descrambled on receiving. It should be set the same as the
transmitting side."
DEFVAL { noDescrambling }
::= { zxAnImaGroupEntry 20 }
zxAnImaGroupDsx1TxScrambling OBJECT-TYPE
SYNTAX INTEGER {
scrambling(1),
noScrambling(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates whether the information (48 octet
payload) is being scrambled before transmitting. It should
be set the same as the receiving side."
DEFVAL { noScrambling }
::= { zxAnImaGroupEntry 21 }
zxAnImaGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, delete the ima group interface
in this table."
::= { zxAnImaGroupEntry 22 }
--------------------------------------------------------------------------------
-- 2.IMA Link
--------------------------------------------------------------------------------
zxAnImaLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnImaLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"xDsl zxAnImaLink interface table."
::= { zxAnImaObjects 2 }
zxAnImaLinkEntry OBJECT-TYPE
SYNTAX ZxAnImaLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ima link interface create entry.It is used to create or remove a
ima link interface."
INDEX { zxAnImaShelf,zxAnImaSlot,zxAnImaLinkId }
::= { zxAnImaLinkTable 1 }
ZxAnImaLinkEntry ::= SEQUENCE {
zxAnImaLinkId Integer32,
zxAnImaLinkGroupIndex Integer32,
zxAnImaLinkNeTxAdminStatus INTEGER,
zxAnImaLinkNeRxState ImaLinkState,
zxAnImaLinkNeTxState ImaLinkState,
zxAnImaLinkFeRxState ImaLinkState,
zxAnImaLinkFeTxState ImaLinkState,
zxAnImaLinkLoopback INTEGER
}
zxAnImaLinkId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value for the IMA port on this card."
::= { zxAnImaLinkEntry 1 }
zxAnImaLinkGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IMA group index that this link joined.If the link doesn't join
any ima group,this value is 255 (0xff). "
DEFVAL { 255 }
::= { zxAnImaLinkEntry 2 }
zxAnImaLinkNeTxAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of IMA link near-end transmission."
::= { zxAnImaLinkEntry 3 }
zxAnImaLinkNeRxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the near-end receive link."
::= { zxAnImaLinkEntry 4 }
zxAnImaLinkNeTxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the near-end transmit link."
::= { zxAnImaLinkEntry 5 }
zxAnImaLinkFeRxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the far-end receive link."
::= { zxAnImaLinkEntry 6 }
zxAnImaLinkFeTxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the far-end transmit link."
::= { zxAnImaLinkEntry 7 }
zxAnImaLinkLoopback OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback this link or not."
::= { zxAnImaLinkEntry 8 }
END