Commit version 24.12.13800
This commit is contained in:
945
mibs/vertiv/CYCLADES-ACS5K-CONF-MIB
Normal file
945
mibs/vertiv/CYCLADES-ACS5K-CONF-MIB
Normal file
@ -0,0 +1,945 @@
|
||||
CYCLADES-ACS5K-CONF-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
-- Avocent Vendor MIB OID Tree
|
||||
-- Release 3.3.0-9 05/24/2011
|
||||
-- ACS 5000 Enterprise MIB
|
||||
-- The cyACS5KConf has the ACS 5000' configuration MIB) :
|
||||
|
||||
IMPORTS
|
||||
cyACS5KMgmt
|
||||
FROM CYCLADES-ACS5K-MIB
|
||||
InterfaceIndexOrZero
|
||||
FROM IF-MIB
|
||||
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
|
||||
IpAddress, Integer32
|
||||
FROM SNMPv2-SMI
|
||||
DisplayString
|
||||
FROM SNMPv2-TC;
|
||||
|
||||
cyACS5KConf MODULE-IDENTITY
|
||||
LAST-UPDATED "201007260000Z"
|
||||
ORGANIZATION "Avocent Corporation"
|
||||
CONTACT-INFO "postal : Avocent Corporation
|
||||
47281 Bayside Parkway
|
||||
Fremont, CA 94538, USA
|
||||
e-mail : Technical Support
|
||||
techsupport@avocent.com"
|
||||
DESCRIPTION "Configuration of ACS5000 products"
|
||||
REVISION "201007260000Z"
|
||||
DESCRIPTION "First Draft"
|
||||
::= { cyACS5KMgmt 2 }
|
||||
|
||||
-- Current Avocent ACS Configuration core mib table entries :
|
||||
-- cyHostName OBJECT-TYPE ::= { cyACS5KConf 1 }
|
||||
-- cyConsoleBanner OBJECT-TYPE ::= { cyACS5KConf 2 }
|
||||
-- cyMotd OBJECT-TYPE ::= { cyACS5KConf 3 }
|
||||
-- cyEthItf OBJECT-IDENTITY ::= { cyACS5KConf 4 }
|
||||
-- cyNameService OBJECT-IDENTITY ::= { cyACS5KConf 5 }
|
||||
-- cySerialPortConf OBJECT-IDENTITY ::= { cyACS5KConf 6 }
|
||||
|
||||
cyHostName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (1..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The Host Name "
|
||||
::= { cyACS5KConf 1 }
|
||||
|
||||
cyConsoleBanner OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (1..255))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The console banner "
|
||||
::= { cyACS5KConf 2 }
|
||||
|
||||
cyMotd OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..255))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The motd message "
|
||||
::= { cyACS5KConf 3 }
|
||||
|
||||
cyEthItf OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION "The configuration of the Ethernet Interface"
|
||||
::= { cyACS5KConf 4 }
|
||||
|
||||
cyEthDhcpc OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0), -- DHCP is inactive
|
||||
active(1), -- DHCP is active
|
||||
restore(2) -- DHCP is active and ACS saves the last parameters
|
||||
-- assigned by the server
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The ACS can request all of its ethernet parameters
|
||||
to a DHCP server"
|
||||
::= { cyEthItf 1 }
|
||||
|
||||
cyEthIPaddr OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the IP address of the Ethernet Interface"
|
||||
::= { cyEthItf 2 }
|
||||
|
||||
cyEthIPmask OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The mask fot the Ethernet network"
|
||||
::= { cyEthItf 3 }
|
||||
|
||||
cyEthMTU OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The Maximum Transmission Unit size, wich determines
|
||||
whether or not packets should be broken up"
|
||||
::= { cyEthItf 4 }
|
||||
|
||||
cyEthIPaddr2 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The Ethernet secondary IP address"
|
||||
::= { cyEthItf 5 }
|
||||
|
||||
cyEthIPmask2 OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The Ethernet secondary IP mask"
|
||||
::= { cyEthItf 6 }
|
||||
|
||||
cyEnableIPv4 OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
no(0), -- IPv4 addresses are disabled
|
||||
yes(1) -- IPv4 addresses are enabled
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This parameter is used to enable or disable the configuration of IPv4 addresses"
|
||||
::= { cyEthItf 7 }
|
||||
|
||||
cyEnableIPv6 OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
no(0), -- IPv6 addresses are disabled
|
||||
yes(1) -- IPv6 addresses are enabled
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This parameter is used to enable or disable the configuration of IPv6 addresses"
|
||||
::= { cyEthItf 8 }
|
||||
|
||||
cyIPv6Method OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
stateless-only(0),
|
||||
static(1),
|
||||
dhcp(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IPv6 configuration method"
|
||||
::= { cyEthItf 9 }
|
||||
|
||||
cyDHCPv6Opts OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
none(0),
|
||||
dns(1),
|
||||
domain(2),
|
||||
dns-domain(3)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "DHCP options for IPv6"
|
||||
::= { cyEthItf 10 }
|
||||
|
||||
cyEthIPaddr6 OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the IPv6 address of the Ethernet Interface"
|
||||
::= { cyEthItf 11 }
|
||||
|
||||
cyEthPrefix6 OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IPv6 network prefix length of the Ethernet Interface"
|
||||
::= { cyEthItf 12 }
|
||||
|
||||
cyNameService OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION "The Name Service configuration"
|
||||
::= { cyACS5KConf 5 }
|
||||
|
||||
cyResolverOrder OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..15))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "It specifies how host lookups are to be performed.
|
||||
Valid values : empty, 'hosts', 'bind', 'hosts, bind',
|
||||
'bind, hosts' "
|
||||
::= { cyNameService 1 }
|
||||
|
||||
cyMultipleIP OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..3))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Valid values are ON or OFF. If set to ON, the resolve
|
||||
library will return all valid addresses for a host
|
||||
that appears in the /etc/hosts file, instead of only
|
||||
the first. "
|
||||
::= { cyNameService 2 }
|
||||
|
||||
cyDNSserv OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION "The DNS server configuration"
|
||||
::= { cyNameService 3 }
|
||||
|
||||
cyDNSpriserv OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Internet Address (in dot notation) of primary name
|
||||
server that the resolver should query."
|
||||
::= { cyDNSserv 1 }
|
||||
|
||||
cyDNSsecserv OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Internet Address (in dot notation) of secondary name
|
||||
server that the resolver should query."
|
||||
::= { cyDNSserv 2 }
|
||||
|
||||
cyDNSdomain OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (1..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Local domain name ."
|
||||
::= { cyDNSserv 3 }
|
||||
|
||||
cySerialPortConf OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION "The PortSlave configuration - pslave.conf file.
|
||||
It configures the all serial ports."
|
||||
::= { cyACS5KConf 6 }
|
||||
|
||||
cySerialGlobal OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION "These parameters have the prefix conf. in
|
||||
the pslave.conf file"
|
||||
::= { cySerialPortConf 1 }
|
||||
|
||||
cySerialInclude OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "File used in centralized management."
|
||||
::= { cySerialGlobal 1 }
|
||||
|
||||
cySerialNFS OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..50))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Remote Network File System where data buffering will be
|
||||
written instead of the default directory '/var/run/DB'."
|
||||
::= { cySerialGlobal 2 }
|
||||
|
||||
cySerialLockDir OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..50))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The lock directory for the ACS."
|
||||
::= { cySerialGlobal 3 }
|
||||
|
||||
cySerialRlogin OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..50))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Location of the rlogin binary that accepts the -i flag."
|
||||
::= { cySerialGlobal 4 }
|
||||
|
||||
cySerialPppd OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..50))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Location of the pppd binary."
|
||||
::= { cySerialGlobal 5 }
|
||||
|
||||
cySerialTelnet OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..50))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Location of the telnet application"
|
||||
::= { cySerialGlobal 6 }
|
||||
|
||||
cySerialSsh OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..50))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Location of the ssh application"
|
||||
::= { cySerialGlobal 7 }
|
||||
|
||||
cySerialLocalLogins OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
off(0),
|
||||
on(1) -- possible to login to the ACS directly by placing a !
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This parameter is only necessary when authentication is
|
||||
being performed for a port.
|
||||
This is useful if the Radius authentication server is down."
|
||||
::= { cySerialGlobal 8 }
|
||||
|
||||
cySerialFacility OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This value (0-7) is the Local facility sent to the syslog daemon."
|
||||
::= { cySerialGlobal 9 }
|
||||
|
||||
cySerialDBFacility OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This value (0-7) is the Local facility sent to the syslog
|
||||
daemon with the data when ."
|
||||
::= { cySerialGlobal 10 }
|
||||
|
||||
cySerialGroupTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CyGroupEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This associates group name and its users"
|
||||
::= { cySerialGlobal 11 }
|
||||
|
||||
cygroupEntry OBJECT-TYPE
|
||||
SYNTAX CyGroupEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "One particular association between group name and its users"
|
||||
INDEX { cyGroupIndex }
|
||||
::= { cySerialGroupTable 1 }
|
||||
|
||||
CyGroupEntry ::= SEQUENCE {
|
||||
cyGroupIndex InterfaceIndexOrZero,
|
||||
cyGroupName DisplayString,
|
||||
cyGroupUsers DisplayString
|
||||
}
|
||||
|
||||
cyGroupIndex OBJECT-TYPE
|
||||
SYNTAX InterfaceIndexOrZero
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "number to identifier the group"
|
||||
::= { cygroupEntry 1 }
|
||||
|
||||
cyGroupName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..20))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The Group Name "
|
||||
::= { cygroupEntry 2 }
|
||||
|
||||
cyGroupUsers OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..80))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The users names "
|
||||
::= { cygroupEntry 3 }
|
||||
|
||||
cySerialSpec OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION "These parameters have the prefix all. or sxx. in the pslave.conf file"
|
||||
::= { cySerialPortConf 2 }
|
||||
|
||||
cySerialPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CySPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This is the specific configuration to serial port"
|
||||
::= { cySerialSpec 1 }
|
||||
|
||||
cysportEntry OBJECT-TYPE
|
||||
SYNTAX CySPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "One particular serial port configuration"
|
||||
INDEX { cySPortNumber }
|
||||
::= { cySerialPortTable 1 }
|
||||
|
||||
CySPortEntry ::= SEQUENCE {
|
||||
cySPortNumber InterfaceIndexOrZero, -- 0 == all. X == ttyX sX.
|
||||
cySPortTty DisplayString, -- associate device
|
||||
cySPortName DisplayString, -- alias name
|
||||
cySPortSpeed INTEGER, -- physical port configuration
|
||||
cySPortDataSize Integer32,
|
||||
cySPortStopBits Integer32,
|
||||
cySPortParity DisplayString,
|
||||
cySPortFlowCtrl DisplayString,
|
||||
cySPortDTRdelay Integer32,
|
||||
cySPortDCDCtrl INTEGER,
|
||||
cySPortLogUtmp INTEGER, -- log into UTMP
|
||||
cySPortLogWtmp INTEGER, -- log into WTMP
|
||||
cySPortLogform DisplayString,
|
||||
cySPortAuthtype DisplayString, -- authentication type
|
||||
cySPortAuthSrv1 DisplayString, -- IP address of the primary authentication server
|
||||
cySPortAccSrv1 DisplayString, -- IP address of the primarty accounting server
|
||||
cySPortAuthTmo Integer32, -- time out per authentication query
|
||||
cySPortAuthRetr Integer32, -- authentication number of retries
|
||||
cySPortAuthSrv2 DisplayString, -- IP address of the secondary authentication server
|
||||
cySPortAccSrv2 DisplayString, -- IP address of the secondary accounting server
|
||||
cySPortAuthSecret DisplayString, -- secret used in authentication
|
||||
cySPortAuthRadP INTEGER, -- accept RADIUS' user without password
|
||||
cySPortAuthAcc DisplayString, -- access restrition on Users
|
||||
cySPortProtocol DisplayString, -- Profile
|
||||
cySPortRemoteIP DisplayString, -- remote IP address
|
||||
cySPortSocketPort DisplayString, -- number of socket port
|
||||
cySPortRemHost DisplayString, -- IP address of the remote Host
|
||||
cySPortBanner DisplayString, -- Banner
|
||||
cySPortPrompt DisplayString, -- Login prompt
|
||||
cySPortTermType DisplayString, -- terminal type
|
||||
cySPortAutomUsr DisplayString, -- automatic user
|
||||
cySPortNetMask IpAddress, -- net mask
|
||||
cySPortPppMtu Integer32,
|
||||
cySPortPppMru Integer32,
|
||||
cySPortPppOptions DisplayString,
|
||||
cySPortPppFoption DisplayString,
|
||||
cySPortModemChat DisplayString, -- initchat send to modem
|
||||
cySPortSttyCmd DisplayString,
|
||||
cySPortSockTx Integer32, -- socket transmission interval
|
||||
cySPortSockPoll Integer32, -- socket polling interval
|
||||
cySPortSockIdle Integer32, -- socket idle timeout
|
||||
cySPortDBsize Integer32, -- maximum size of the data buffering file
|
||||
cySPortDBtime INTEGER, -- data buffering with/without timestamp
|
||||
cySPortDBmode DisplayString, -- data bufferinf mode circ or line
|
||||
cySPortDBsyslog Integer32, -- size of the data send to syslog
|
||||
cySPortDBmenu INTEGER, -- menu of the data buffering
|
||||
cySPortDBalarm INTEGER, -- use alarm generating feature
|
||||
cySPortSSHbreak DisplayString, -- break sequence (SSH)
|
||||
cySPortSniffSess DisplayString, -- sniff session type
|
||||
cySPortSniffAdm DisplayString, -- admin users to sniff
|
||||
cySPortSniffEsc DisplayString, -- escape char to sniff session
|
||||
cySPortSniffMsess DisplayString, -- multiple session
|
||||
cySPortTelnetMode INTEGER, -- telnet client mode
|
||||
cySPortSysBufSess INTEGER, -- syslog buffering at all times
|
||||
cySPortLFSuppress INTEGER, -- LF suppression in socket_server session
|
||||
cySPortAutoInput DisplayString, -- Input string to auto answer
|
||||
cySPortAutoOutput DisplayString, -- Output string to auto answer
|
||||
cySPortPmType DisplayString, -- Power Management IPDU type
|
||||
cySPortPmUsers DisplayString, -- Power Management IPDU users
|
||||
cySPortPmOutlet DisplayString, -- Power Management Outlets
|
||||
cySPortPmKey DisplayString, -- Power Management Hotkey
|
||||
cySPortPmNOutlets Integer32, -- Power Management IPDU number of outlets
|
||||
cySPortBreakInterval Integer32, -- Break interval (in ms)
|
||||
cySPortRemoteIP6 DisplayString, -- remote IP address
|
||||
cySPortPrefix6 Integer32 -- port IP address prefix length
|
||||
}
|
||||
|
||||
cySPortNumber OBJECT-TYPE
|
||||
SYNTAX InterfaceIndexOrZero
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "number to identifier the serial port. Value 0 is ALL."
|
||||
::= { cysportEntry 1 }
|
||||
|
||||
cySPortTty OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..25))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The device name for the serial port."
|
||||
::= { cysportEntry 2 }
|
||||
|
||||
cySPortName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Alias name given to the server connected to the serial port."
|
||||
::= { cysportEntry 3 }
|
||||
|
||||
cySPortSpeed OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
s50bps(50), s75bps(75), s110bps(110), s134bps(134),
|
||||
s150bps(150), s200bps(200), s300bps(300), s600bps(600),
|
||||
s1200bps(1200), s1800bps(1800),
|
||||
s2400bps(2400), s4800bps(4800),
|
||||
s9600bps(9600), s14400bps(14400),
|
||||
s19200bps(19200), s28800bps(28800),
|
||||
s38400bps(38400), s57600bps(57600),
|
||||
s115200bps(115200), s230400bps(230400),
|
||||
s460800bps(460800)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The speed for serial port."
|
||||
::= { cysportEntry 4 }
|
||||
|
||||
cySPortDataSize OBJECT-TYPE
|
||||
SYNTAX Integer32 (4..8)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The data size for serial port."
|
||||
::= { cysportEntry 5 }
|
||||
|
||||
cySPortStopBits OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..2)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The number of stop bits for serial port."
|
||||
::= { cysportEntry 6 }
|
||||
|
||||
cySPortParity OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..5))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The parity for serial port."
|
||||
::= { cysportEntry 7 }
|
||||
|
||||
cySPortFlowCtrl OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..5))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The flow control for serial port."
|
||||
::= { cysportEntry 8 }
|
||||
|
||||
cySPortDTRdelay OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This specifies how long (in miliseconds) a DTR signal
|
||||
will be turned off before it is turned on again."
|
||||
::= { cysportEntry 9 }
|
||||
|
||||
cySPortDCDCtrl OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
notctrl(0),
|
||||
control(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "DCD signal controls the connection request."
|
||||
::= { cysportEntry 10 }
|
||||
|
||||
cySPortLogUtmp OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0),
|
||||
active(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "ACS update the login records in /var/run/utmp file."
|
||||
::= { cysportEntry 11 }
|
||||
|
||||
cySPortLogWtmp OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0),
|
||||
active(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "ACS update the login records in /var/run/wtmp file."
|
||||
::= { cysportEntry 12 }
|
||||
|
||||
cySPortLogform OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the format to write login record."
|
||||
::= { cysportEntry 13 }
|
||||
|
||||
cySPortAuthtype OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..25))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Authentication type : ."
|
||||
::= { cysportEntry 14 }
|
||||
|
||||
cySPortAuthSrv1 OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IP address of the primary authentication server."
|
||||
::= { cysportEntry 15 }
|
||||
|
||||
cySPortAccSrv1 OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IP address of the primary accounting server."
|
||||
::= { cysportEntry 16 }
|
||||
|
||||
cySPortAuthTmo OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the timeout (in seconds) for authentication
|
||||
query to be answered."
|
||||
::= { cysportEntry 17 }
|
||||
|
||||
cySPortAuthRetr OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This defines the number of times each server is tried
|
||||
before another is contacted."
|
||||
::= { cysportEntry 18 }
|
||||
|
||||
cySPortAuthSrv2 OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IP address of the secondary authentication server."
|
||||
::= { cysportEntry 19 }
|
||||
|
||||
cySPortAccSrv2 OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IP address of the secondary accounting server."
|
||||
::= { cysportEntry 20 }
|
||||
|
||||
cySPortAuthSecret OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the shared secret with authentciation servers."
|
||||
::= { cysportEntry 21 }
|
||||
|
||||
cySPortAuthRadP OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0),
|
||||
active(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "To accept Radius' user without password."
|
||||
::= { cysportEntry 22 }
|
||||
|
||||
cySPortAuthAcc OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "access restrition on Users."
|
||||
::= { cysportEntry 23 }
|
||||
|
||||
cySPortProtocol OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Defines the port serial's protocol."
|
||||
::= { cysportEntry 24 }
|
||||
|
||||
cySPortRemoteIP OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..20))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the default IP address of the serial port."
|
||||
::= { cysportEntry 25 }
|
||||
|
||||
cySPortSocketPort OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..10))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This defines an alternative labeling system for the serial port."
|
||||
::= { cysportEntry 26 }
|
||||
|
||||
cySPortRemHost OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The IP address of the host to which the serial port will connect."
|
||||
::= { cysportEntry 27 }
|
||||
|
||||
cySPortBanner OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..250))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This defines the banner."
|
||||
::= { cysportEntry 28 }
|
||||
|
||||
cySPortPrompt OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..250))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This defines the login prompt to the serial port."
|
||||
::= { cysportEntry 29 }
|
||||
|
||||
cySPortTermType OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..20))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This defines the terminal type."
|
||||
::= { cysportEntry 30 }
|
||||
|
||||
cySPortAutomUsr OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This defines the automatic user."
|
||||
::= { cysportEntry 31 }
|
||||
|
||||
cySPortNetMask OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The network mask used in dial in connection."
|
||||
::= { cysportEntry 32 }
|
||||
|
||||
cySPortPppMtu OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The PPP MTU - dial in connection."
|
||||
::= { cysportEntry 33 }
|
||||
|
||||
cySPortPppMru OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The PPP MRU - dial in connection."
|
||||
::= { cysportEntry 34 }
|
||||
|
||||
cySPortPppOptions OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The PPP options when ACS autodetects the PPP session ."
|
||||
::= { cysportEntry 35 }
|
||||
|
||||
cySPortPppFoption OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The PPP forced options when the user has already been authenticated."
|
||||
::= { cysportEntry 36 }
|
||||
|
||||
cySPortModemChat OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The initchat send to modem connected."
|
||||
::= { cysportEntry 37 }
|
||||
|
||||
cySPortSttyCmd OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..180))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "the tty settings after socket connection is established."
|
||||
::= { cysportEntry 38 }
|
||||
|
||||
cySPortSockTx OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Defines the delay (in miliseconds) before transmission to
|
||||
the Ethernet of data received through a serial port ."
|
||||
::= { cysportEntry 39 }
|
||||
|
||||
cySPortSockPoll OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Keep-alive timer (miliseconds) to the TCP connection ."
|
||||
::= { cysportEntry 40 }
|
||||
|
||||
cySPortSockIdle OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The idle timeout in seconds ."
|
||||
::= { cysportEntry 41 }
|
||||
|
||||
cySPortDBsize OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Maximum size of the data buffering file."
|
||||
::= { cysportEntry 42 }
|
||||
|
||||
cySPortDBtime OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0),
|
||||
active(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Timestamp in data buffering."
|
||||
::= { cysportEntry 43 }
|
||||
|
||||
cySPortDBmode OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..5))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Data buffering mode : circ or line"
|
||||
::= { cysportEntry 44 }
|
||||
|
||||
cySPortDBsyslog OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "size of the data buffering send to syslog."
|
||||
::= { cysportEntry 45 }
|
||||
|
||||
cySPortDBmenu OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
displayMenu(0),
|
||||
inactive(1),
|
||||
displayDB(2),
|
||||
displayParc(3)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Menu of the data buffering."
|
||||
::= { cysportEntry 46 }
|
||||
|
||||
cySPortDBalarm OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0),
|
||||
active(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Generating Alarms."
|
||||
::= { cysportEntry 47 }
|
||||
|
||||
cySPortSSHbreak OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..16))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Break sequence - ssh session"
|
||||
::= { cysportEntry 48 }
|
||||
|
||||
cySPortSniffSess OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..5))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Sniff session type"
|
||||
::= { cysportEntry 49 }
|
||||
|
||||
cySPortSniffAdm OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "List of admin users to sniff session"
|
||||
::= { cysportEntry 50 }
|
||||
|
||||
cySPortSniffEsc OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..6))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Escape sequence used in sniff session"
|
||||
::= { cysportEntry 51 }
|
||||
|
||||
cySPortSniffMsess OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..20))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Multiple sniff sessions"
|
||||
::= { cysportEntry 52 }
|
||||
|
||||
cySPortTelnetMode OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
text(0),
|
||||
binary(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Mode negotiated by client telnet with the server"
|
||||
::= { cysportEntry 53 }
|
||||
|
||||
cySPortSysBufSess OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
yes(0),
|
||||
no(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Syslog Buffering at all times"
|
||||
::= { cysportEntry 54 }
|
||||
|
||||
cySPortLFSuppress OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(0),
|
||||
active(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "LF suppression in socket_server session"
|
||||
::= { cysportEntry 55 }
|
||||
|
||||
cySPortAutoInput OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This string is used to auto answer. It's the input string"
|
||||
::= { cysportEntry 56 }
|
||||
|
||||
cySPortAutoOutput OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This string is used to auto answer. It's the output string"
|
||||
::= { cysportEntry 57 }
|
||||
|
||||
cySPortPmType OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..20))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IPDU type, when the port protocol is configured as IPDU"
|
||||
::= { cysportEntry 58 }
|
||||
|
||||
cySPortPmUsers OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "List of users which can access the IPDU and their respective outlets"
|
||||
::= { cysportEntry 59 }
|
||||
|
||||
cySPortPmOutlet OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..40))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "List of <IPDU port>.<outlet> pairs, where the server is connected"
|
||||
::= { cysportEntry 60 }
|
||||
|
||||
cySPortPmKey OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..8))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Hotkey to grant access to the Power Management from a Telnet/SSH session"
|
||||
::= { cysportEntry 61 }
|
||||
|
||||
cySPortPmNOutlets OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Number of outlets of the IPDU"
|
||||
::= { cysportEntry 62 }
|
||||
|
||||
cySPortBreakInterval OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The break interval in miliseconds."
|
||||
::= { cysportEntry 63 }
|
||||
|
||||
cySPortRemoteIP6 OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..46))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This is the default IPv6 address of the serial port."
|
||||
::= { cysportEntry 64 }
|
||||
|
||||
cySPortPrefix6 OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..128)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Port IP address network prefix length."
|
||||
::= { cysportEntry 65 }
|
||||
|
||||
END
|
||||
|
||||
Reference in New Issue
Block a user