WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

Commit version 24.12.13800

Browse Source
This commit is contained in:
Chris Hammer
2025-01-06 17:35:06 -05:00
parent b7f6a79c2c
commit 55d9218816
6133 changed files with 4239740 additions and 1374287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

993
mibs/supermicro/SUPERMICRO-MPLS-TE-MIB Normal file
View File

@ -0,0 +1,993 @@
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
-- $Id: fsmpte.mib,v 1.11 2012/09/07 09:52:05 siva Exp $
SUPERMICRO-MPLS-TE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
enterprises, Integer32,
Unsigned32, zeroDotZero
FROM SNMPv2-SMI -- [RFC2578]
RowStatus, RowPointer, TruthValue
FROM SNMPv2-TC -- [RFC2579]
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsExtendedTunnelId
FROM MPLS-TC-STD-MIB -- [RFC3811]
mplsTunnelEntry, mplsTunnelIndex, mplsTunnelInstance,
mplsTunnelIngressLSRId, mplsTunnelEgressLSRId,
mplsTunnelHopEntry
FROM MPLS-TE-STD-MIB -- [RFC3812]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC2571]
gmplsTunnelErrorReporterType, gmplsTunnelErrorReporter,
gmplsTunnelErrorCode, gmplsTunnelErrorSubcode,
gmplsTunnelAdminStatusFlags
FROM GMPLS-TE-STD-MIB -- [RFC4802]
InterfaceIndexOrZero
FROM IF-MIB -- [RFC2863]
;
fsMplsTeMIB MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "Super Micro Computer Inc."
CONTACT-INFO "support@Supermicro.com"
DESCRIPTION "The Proprietary MIB for MPLS-TE module"
REVISION "201209050000Z"
DESCRIPTION "MIB objects added for Attribute List, GMPLS Features and
GMPLS Tunnel Notification traps."
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) futureMpls (13) 12}
-- Notifications
fsMplsTeNotifications OBJECT IDENTIFIER ::= { fsMplsTeMIB 0 }
-- MPLS tunnel objects
fsMplsTeObjects OBJECT IDENTIFIER ::= { fsMplsTeMIB 1 }
-- conformance
fsMplsTeConformance OBJECT IDENTIFIER ::= { fsMplsTeMIB 2 }
-- MPLS tunnel scalar object
fsMplsTeScalarObjects OBJECT IDENTIFIER ::= { fsMplsTeObjects 1 }
-- Start of fsMplsTunnelTable
fsMplsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fsMplsTunnelTable is extension of mplsTunnelTable."
::= { fsMplsTeObjects 2}
fsMplsTunnelEntry OBJECT-TYPE
SYNTAX FsMplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fsMplsTunnelTable is extension of mplsTunnelTable."
AUGMENTS { mplsTunnelEntry}
::= { fsMplsTunnelTable 1 }
FsMplsTunnelEntry ::= SEQUENCE {
fsMplsTunnelType BITS,
fsMplsTunnelLSRIdMapInfo BITS,
fsMplsTunnelMode INTEGER,
fsMplsTunnelProactiveSessIndex Unsigned32,
fsMplsTunnelMBBStatus INTEGER,
fsMplsTunnelDisJointType INTEGER,
fsMplsTunnelAttPointer RowPointer,
fsMplsTunnelEndToEndProtection BITS,
fsMplsTunnelPrConfigOperType INTEGER,
fsMplsTunnelSrlgType INTEGER,
fsMplsTunnelIfIndex InterfaceIndexOrZero,
fsMplsTunnelInitReOptimize TruthValue,
fsMplsTunnelIsProtectingLsp TruthValue,
fsMplsLspTunnelMapIndex MplsTunnelIndex,
fsMplsLspTunnelMapInstance MplsTunnelInstanceIndex,
fsMplsLspTunnelMapIngressLSRId MplsExtendedTunnelId,
fsMplsLspTunnelMapEgressLSRId MplsExtendedTunnelId,
fsMplsTunnelSynchronizationStatus Integer32,
fsMplsTunnelOutPathMsgId Integer32
}
fsMplsTunnelType OBJECT-TYPE
SYNTAX BITS {
mpls (0),
mplstp (1),
gmpls (2),
hlsp (3),
p2mp (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows the administrator to the tunnel type of a MPLS
tunnel.
The value of bit 0 (mpls) if set indicates that this is a normal
MPLS Tunnel.
The value of bit 1 (mplstp) if set indicates that this is MPLS-TP
Tunnel.
The value of bit 2 (gmpls) if set indicates that this is generic
mpls tunnel.
The value of bit 3 (hlsp) if set indicates that this is
hierarchial LSP tunnel.
The value of bit 4 (p2mp) if set indicates that this is a
point-to-multipoint tunnel."
DEFVAL { {mpls} }
::= { fsMplsTunnelEntry 1 }
fsMplsTunnelLSRIdMapInfo OBJECT-TYPE
SYNTAX BITS {
ingressId (0),
egressId (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the Ingress and Egress LSR
ID objects of the tunnel entry to be treated as LSR IDs
or should be treated as an index to the fsMplsTpNodeMapTable.
The value of bit 0 (ingressId) if set indicates mplsTunnelIngressLSRId
is not the actual value, fsMplsTpNodeMapTable table should be
referred to get the actual tunnel ingressId.
The value of bit 0 (ingressId) if not set indicates
mplsTunnelIngressLSRId is the actual value.
The value of bit 1 (egressId) if set for P2MP tunnels, indicates
mplsTunnelEgressLSRId refers to P2MP identifier. In case of P2MP
tunnels, fsMplsTpNodeMapTable table should not be referred to get
the actual tunnel egressId.
The value of bit 1 (egressId) if set for non-P2MP tunnels, indicates
mplsTunnelEgressLSRId is not the actual value, fsMplsTpNodeMapTable
table should be referred to get the actual tunnel egressId.
The value of bit 1 (egressId) if not set indicates
mplsTunnelEgressLSRId is the actual value."
::= { fsMplsTunnelEntry 2 }
fsMplsTunnelMode OBJECT-TYPE
SYNTAX INTEGER {
unidirectional (0),
coroutedBidirectional (1),
associatedBidirectional (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows the administrator to configure the mode of
tunnel.
The value unidirectional (0) indicates that the direction of the
tunnel is only single direction.
The value coroutedBidirectional (1) indicates a bidirectional LSP
between LSR's A and B which consists of two unidirectional LSPs,
one from A to B (forward LSP) and the other from B to A (reverse LSP).
Both these LSP's are regarded as a pair providing a single logical
bidirectional transport path. The forward and reverse LSP passes
through same set of nodes (or LSR's). A single entry in mplsTunnelTable
is enough to represent this type of tunnel which contains label binding
association for both forward and reverse LSP. i.e., mplsTunnelTable
points to a single entry in mplsXCTable which inturn contains both
forward and reverse label bindings.
The value associatedBidirectional (2) indicates a bidirectional LSP
between LSR's A and B which consists of two unidirectional LSPs,
one from A to B (forward LSP) and the other from B to A (reverse LSP).
Both these LSP's are regarded as a pair providing a single logical
bidirectional transport path. The forward and reverse LSP need not
pass through same set of nodes (or LSR's). 2 entries should be created
mplsTunnelTable to represent this type of tunnel which contains
individual label binding association for forward and reverse LSP's.
Association between forward and reverse LSP is achieved by configuring
the objects fsMplsTpTunnelDestTunnelIndex and
fsMplsTpTunnelDestTunnelLspNum in fsMplsTpTunnelTable."
DEFVAL { unidirectional }
::= { fsMplsTunnelEntry 3 }
fsMplsTunnelProactiveSessIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the proactive session index for this tunnel.
When a proactive session to monitor this tunnel is established,
the application updates this object with the session index."
::= { fsMplsTunnelEntry 4 }
fsMplsTunnelMBBStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative Make-Before-Break status for Tunnel.
The value 'enabled' (1) indicates that Tunnel supports
Make-Before-Break capablity.The value 'disabled' (2)
indicates that Tunnel does not support
Make-Before-Break capablity."
DEFVAL {disabled}
::= { fsMplsTunnelEntry 5 }
fsMplsTunnelDisJointType OBJECT-TYPE
SYNTAX INTEGER { srlgDisjoint(1),nodeDisjoint(2),linkDisjoint(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the disjoint type of the protection tunnel
with respect to the working tunnel. It is applicable only for
protection tunnel."
DEFVAL {srlgDisjoint}
::= { fsMplsTunnelEntry 6 }
fsMplsTunnelAttPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable points to a row in the fsTunnelAttributeTable .
This table identifies the attribute of LSP. A value of zeroDotZero
indicates that no Attribute has been associated with this
tunnel yet."
DEFVAL { zeroDotZero }
::= { fsMplsTunnelEntry 7 }
fsMplsTunnelEndToEndProtection OBJECT-TYPE
SYNTAX BITS {
unprotected(0),
fullReroute(1),
rerouteWithoutExtraTraffic(2),
dedicatedOneToOne(3),
dedicatedUniOnePlusOne(4),
dedicatedBiOnePlusOne(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This bitmask indicates the level of end to end protection required. A
value of zero (no bits set) indicates that any protection may be
used. The following describes these bitfields:
unprotected
This flag is set to indicate that the LSP should not use any
protection.
fullReroute
This flag is set to indicate that the protecting LSP creation
only when protected (primary) LSP fails.
rerouteWitoutExtraTraffic
This flag is set to indicate that protecting LSP shall not
carry traffic other than that of Primary LSP. In this case
protecting LSP is usually not configured in the data plane
before protected LSP failure.
dedicatedOneToOne
This flag is set to indicate that a dedicated LSP
protection scheme, i.e., 1:1 protection, should be used to
support the LSP.
dedicatedUniOnePlusOne
This flag is set to indicate that a dedicated LSP
protection scheme, i.e., 1+1 protection, should be used to
support the LSP. It is used for protecting uni-directional
tunnel and No additional signalling is required for switching
from one LSP to another in case of failure and recovery
dedicatedBiOnePlusOne
This flag is set to indicate that a dedicated LSP
protection scheme, i.e., 1+1 protection, should be used to
support the LSP. It is used for protecting bi-directional
tunnel and additional signalling is required for switching
from one LSP to another in case of failure and recovery."
REFERENCE
"Section 1, RFC 4872, RSVP-TE Extensions in Support of End-to-End
Generalized Multi-Protocol Label Switching (GMPLS) Recovery,
J.P. Lang, Ed.Sonos, Y.Rekhter, Ed.Juniper, D.Papadimitriou, Ed.Alcatel,
May 2007."
DEFVAL { {unprotected} }
::= { fsMplsTunnelEntry 8 }
fsMplsTunnelPrConfigOperType OBJECT-TYPE
SYNTAX INTEGER {
revertive(1),
nonRevertive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to indicate the operation type/mode of the tunnel.
If the value is set to 'revertive(1)', the normal traffic shall be
returned to the working LSP has recoverd from the failure. (i.e)
after the establishment of protection LSP during Fully Re-Route
operation ingress will not initiate path tear message for working LSP.
If the value is set to 'nonRevertive(2)', the normal traffic shall
not be returned to the working LSP has recovered from the failure.(i.e)
after the establishment of protection LSP during Fully Re-Route
operation ingress will initiate path tear message for working LSP."
REFERENCE
"Section 12, RFC 4872, RSVP-TE Extensions in Support of End-to-End
Generalized Multi-Protocol Label Switching (GMPLS) Recovery,J.P. Lang,
Ed.Sonos, Y.Rekhter, Ed.Juniper, D.Papadimitriou, Ed.Alcatel,May 2007"
DEFVAL { nonRevertive }
::= { fsMplsTunnelEntry 9 }
fsMplsTunnelSrlgType OBJECT-TYPE
SYNTAX INTEGER { includeAny(1),includeAll(2),excludeAny(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates shared risk link group value for this tunnel."
::= { fsMplsTunnelEntry 10 }
fsMplsTunnelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise
this variable should contain the value of zero
indicating that a valid ifIndex was not assigned to
this tunnel interface."
REFERENCE
"RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
and F. Kastenholtz, June 2000"
DEFVAL { 0 }
::= { fsMplsTunnelEntry 11 }
fsMplsTunnelInitReOptimize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to indicate the Reoptimization of the tunnel. When
this object is set true then user has initiated reoptimization. Default
value of this object is FALSE.
A tunnel is defined as being reoptimized when some change occurs to
the tunnel to make it perform more optimally, and this change does
not disrupt the tunnel's traffic flow. This implies that any path
changes are performed using the make before break algorithm,which
specifies that the new path should be signaled before the old path is
decommissioned and traffic moved onto the new one."
DEFVAL { false }
::= { fsMplsTunnelEntry 12 }
fsMplsTunnelIsProtectingLsp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this LSP is working LSP or protection
LSP. If this object is set to true, it means the LSP is protection LSP.
If this object is set to false, it means the LSP is working LSP."
DEFVAL { false }
::= { fsMplsTunnelEntry 13 }
fsMplsLspTunnelMapIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to indicate the tunnel index of FA LSP to which the
tunnel is stacked. This object is applicable only in the node on which
stacking of FA LSP and E2E LSP occurs"
::= { fsMplsTunnelEntry 14 }
fsMplsLspTunnelMapInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to indicate the tunnel instance of FA LSP to which the
tunnel is stacked. This object is applicable only in the node on which
stacking of FA LSP and E2E LSP occurs"
::= { fsMplsTunnelEntry 15 }
fsMplsLspTunnelMapIngressLSRId OBJECT-TYPE
SYNTAX MplsExtendedTunnelId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to indicate the identity of the Ingress LSR of FA LSP
to which the tunnel is stacked. This object is applicable only in the
node on which stacking of FA LSP and E2E LSP occurs"
::= { fsMplsTunnelEntry 16 }
fsMplsLspTunnelMapEgressLSRId OBJECT-TYPE
SYNTAX MplsExtendedTunnelId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to indicate the identity of the Egress LSR of FA LSP
to which the tunnel is stacked. This object is applicable only in the
node on which stacking of FA LSP and E2E LSP occurs"
::= { fsMplsTunnelEntry 17 }
fsMplsTunnelSynchronizationStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Synchronization status of the tunnel upon RSVP-TE Graceful
Restart. This object is applicable only for RSVP-TE signalled tunnels.
Following values are possible.
0. Not synchronized.
1. Downstream Synchronized.
2. Upstream Synchronized.
3. Fully Synchronized.
Fully Synchronized refers that the tunnel is fully recovered its state.
Both upstream and downstream nodes has helped the restarting node to recover its
state.
Downstream Synchronized refers that only downstream node has helped the
restarting node by sending RecoveryPath message. In this case, node saves the
RecoveryPath message and starts the recovery process after getting help from
upstream node also.
Upstream Synchronized refers that only uptream node has helped the
restarting node by sending Path message with recovery label object.
In this case, node saves the Path message and starts the recovery process
after getting help from downstream node also.
Not Synchronized state refers that both upstream node and downstream node has
not helped in recovering this tunnel."
REFERENCE
"Section 4.5.2.1 - RFC 5063 Extensions to GMPLS Resource Reservation
Protocol (RSVP) Graceful Restart"
::= { fsMplsTunnelEntry 18 }
fsMplsTunnelOutPathMsgId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the message id generated for the PATH message which is sent from the
node.
This is used for recovering the state when the node receives
SRefresh RecoveryPath message from the helper.
This is applicable only for RSVP-TE signalled tunnels currently."
REFERENCE
"Section 5 - RFC 5063 Extensions to GMPLS Resource Reservation
Protocol (RSVP) Graceful Restart"
::= { fsMplsTunnelEntry 19 }
-- End of fsMplsTunnelTable
-- Start of MPLS-TP Tunnel table
fsMplsTpTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMplsTpTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents MPLS-TP specific extensions to
mplsTunnelTable.
As per MPLS-TP Identifiers draft, LSP_ID is
Src-Global_Node_ID::Src-Tunnel_Num::Dst-Global_Node_ID::
Dst-Tunnel_Num::LSP_Num
mplsTunnelTable is reused for forming the LSP_ID as follows,
Source Tunnel_Num is mapped with mplsTunnelIndex,
Source node identifier is mapped with mplsTunnelIngressLSRId,
Destination node identifier is mapped with mplsTunnelEgressLSRId
LSP_Num is mapped with mplsTunnelInstance.
Source Global identifier and Destination Global identifier are
maintained in the fsMplsTpNodeMapTable and
fsMplsTpNodeMapLocalNum is used to create an entry in
mplsTunnelTable."
REFERENCE
"MPLS-TP Identifiers draft version 02, section 5.2"
::= { fsMplsTeObjects 3 }
fsMplsTpTunnelEntry OBJECT-TYPE
SYNTAX FsMplsTpTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents MPLS-TP
specific tunnel configurations."
AUGMENTS { mplsTunnelEntry}
::= { fsMplsTpTunnelTable 1 }
FsMplsTpTunnelEntry ::= SEQUENCE {
fsMplsTpTunnelDestTunnelIndex MplsTunnelIndex,
fsMplsTpTunnelDestTunnelLspNum MplsTunnelInstanceIndex
}
fsMplsTpTunnelDestTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows the administrator to configure the tunnel index of
the reverse tunnel.
For co-routed bidirectional tunnel, this object will have the value
same as the object mplsTunnelIndex.
This object helps to associate a forward tunnel with the reverse
tunnel in case of associated bidirectional tunnel."
::= { fsMplsTpTunnelEntry 1 }
fsMplsTpTunnelDestTunnelLspNum OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows the administrator to configure the tunnel lsp
number of the reverse tunnel for a associated bidirectional tunnel.
This object helps to associate a forward tunnel with the reverse
tunnel in case of associated bidirectional tunnel.
For co-routed bidirectional tunnel, this object will have the value
same as the object mplsTunnelInstance.
By default, this object will have the value same as the object
mplsTunnelInstance."
::= { fsMplsTpTunnelEntry 2 }
-- End of MPLS-TP Tunnel table
--LSP Attribute Table
fsTunnelAttributeIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for fsTunnelAttributeIndex when creating
entries in the fsTunnelAttributeTable.If the
number of unassigned entries is exhausted, a
retrieval operation will return a value of 0.
When the SET is performed to create a row in the
fsTunnelAttributeTable, the Command Responder
(agent) must determine whether the value is indeed
still unused; Two Network Management Applications
may attempt to create a row (configuration entry)
simultaneously and use the same value. If it is
currently unused, the SET succeeds and the Command
Responder (agent) changes the value of this object,
according to an implementation-specific algorithm.
If the value is in use, however, the SET fails. The
Network Management Application must then re-read
this variable to obtain a new usable value."
::= { fsMplsTeObjects 4 }
fsTunnelAttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsTunnelAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fsTunnelAttributeTable allows allows configuration
of LSP attribute parameters."
::= { fsMplsTeObjects 5}
fsTunnelAttributeEntry OBJECT-TYPE
SYNTAX FsTunnelAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents attribute parameters
to be associated with a LSP. "
INDEX { fsTunnelAttributeIndex }
::= { fsTunnelAttributeTable 1 }
FsTunnelAttributeEntry ::= SEQUENCE {
fsTunnelAttributeIndex Unsigned32,
fsTunnelAttributeName SnmpAdminString,
fsTunnelAttributeSetupPrio Integer32,
fsTunnelAttributeHoldingPrio Integer32,
fsTunnelAttributeIncludeAnyAffinity Unsigned32,
fsTunnelAttributeIncludeAllAffinity Unsigned32,
fsTunnelAttributeExcludeAnyAffinity Unsigned32,
fsTunnelAttributeSessionAttributes BITS,
fsTunnelAttributeBandwidth Unsigned32,
fsTunnelAttributeTeClassType Integer32,
fsTunnelAttributeSrlgType INTEGER,
fsTunnelAttributeRowStatus RowStatus,
fsTunnelAttributeMask BITS
}
fsTunnelAttributeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value that identifies a row in this table."
::= { fsTunnelAttributeEntry 1 }
fsTunnelAttributeName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The canonical name assigned to the LSP attribute entry. This uniquely
identifies the attribute entry."
DEFVAL { "" }
::= { fsTunnelAttributeEntry 2 }
fsTunnelAttributeSetupPrio OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the setup priority attribute. There is no default
value for this object. If this object is not configured, then LSP takes
this attribute from mplsTunnelTable."
::= { fsTunnelAttributeEntry 3 }
fsTunnelAttributeHoldingPrio OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the holding priority attribute. There is no default
value for this object. If this object is not configured, then LSP takes
this attribute from mplsTunnelTable."
::= { fsTunnelAttributeEntry 4 }
fsTunnelAttributeIncludeAnyAffinity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the include-any constraint if and only if the constraint
is zero, or the link and the constraint have a resource class in common.
Valid range is Integer(0..4294967295). There is no default value for this
object. If this object is not configured, then LSP takes this attribute
from mplsTunnelTable."
::= { fsTunnelAttributeEntry 5 }
fsTunnelAttributeIncludeAllAffinity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the include-all constraint if and only if the link
contains all of the administrative groups specified in the constraint.
Valid range is Integer(0..4294967295). There is no default value for this
object. If this object is not configured, then LSP takes this attribute
from mplsTunnelTable."
::= { fsTunnelAttributeEntry 6 }
fsTunnelAttributeExcludeAnyAffinity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the exclude-any constraint if and only if the link
contains none of the administrative groups specified in the constraint.
Valid range is Integer(0..4294967295). There is no default value for this
object. If this object is not configured, then LSP takes this attribute
from mplsTunnelTable."
::= { fsTunnelAttributeEntry 7 }
fsTunnelAttributeSessionAttributes OBJECT-TYPE
SYNTAX BITS {
fastReroute (0),
mergingPermitted (1),
isPersistent (2),
isPinned (3),
recordRoute (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This bit mask indicates optional session values for
this LSP. The following describes these bit
fields:
fastReroute This flag indicates that the any lsp hop may
choose to reroute this LSP.This flag permits transit routers to use
a local repair mechanism which may result in violation of the explicit
routing of this LSP.When a fault is detected on an adjacent
downstream link or node, a transit router can re-route traffic
for fast service restoration.
mergingPermitted This flag permits transit routers
to merge this session with other RSVP sessions for
the purpose of reducing resource overhead on
downstream transit routers, thereby providing
better network scaling.
isPersistent Indicates whether this LSP should
be restored automatically after a failure occurs.
isPinned This flag indicates whether the loose-
routed hops of this LSP are to be pinned.
recordRoute This flag indicates whether or not the signalling
protocol should remember the LSP path after it has been signaled.
If no bits are set, it means session attributes value is not
configured."
::= { fsTunnelAttributeEntry 8 }
fsTunnelAttributeBandwidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the bandwidth attribute. There is no default
value for this object. If this object is not configured, then
LSP takes this attribute from mplsTunnelTable."
::= { fsTunnelAttributeEntry 9 }
fsTunnelAttributeTeClassType OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Class-Type attribute. There is no default
value for this object. If this object is not configured, then
LSP takes this attribute from the tunnel configuration."
::= { fsTunnelAttributeEntry 10 }
fsTunnelAttributeSrlgType OBJECT-TYPE
SYNTAX INTEGER { includeAny(1),includeAll(2),excludeAny(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents Shared Risk Link Group Value attribute.
There is no default value for this object.
If this object is not configured, then LSP takes this attribute from the
tunnel configuration."
::= { fsTunnelAttributeEntry 11 }
fsTunnelAttributeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row in this
table."
::= { fsTunnelAttributeEntry 12 }
fsTunnelAttributeMask OBJECT-TYPE
SYNTAX BITS {
setupPriority (0),
holdingPriority (1),
sessionAttribute (2),
includeAnyAffinity (3),
includeAllAffinity (4),
excludeAllAffinity (5),
bandwidth (6),
classType (7),
srlg (8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to find the number of Attribute parameters
considered while setting up the path.
If no bits are set, it means no Attribute parameters are
configured"
::= { fsTunnelAttributeEntry 13 }
--LSP Attribute Table END
--Start of MPLS Srlg Table
fsMplsTunnelSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMplsTunnelSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fsMplsTunnelSrlgTable allows the administrator to configure
Shared Risk Link Group Values for tunnels."
::= { fsMplsTeObjects 6 }
fsMplsTunnelSrlgEntry OBJECT-TYPE
SYNTAX FsMplsTunnelSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents Shared Risk Link Group Values values
associated with a Tunnel. "
INDEX { mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
mplsTunnelEgressLSRId,
fsMplsTunnelSrlgNo
}
::= { fsMplsTunnelSrlgTable 1 }
FsMplsTunnelSrlgEntry ::= SEQUENCE {
fsMplsTunnelSrlgNo Unsigned32,
fsMplsTunnelSrlgRowStatus RowStatus
}
fsMplsTunnelSrlgNo OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies an SRLG constraint associated with Tunnel.
An SRLG is identified with a 32-bit number that is unique within an IGP
domain. Zero is a valid SRLG number."
::= { fsMplsTunnelSrlgEntry 1 }
fsMplsTunnelSrlgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or delete a row in this
table."
::= { fsMplsTunnelSrlgEntry 2 }
--Tunnel Srlg Table END
-- Start of fsTunnelAttributeSrlgTable
fsTunnelAttributeSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsTunnelAttributeSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fsTunnelAttributeSrlgTable allows the administrator to configure
Shared Risk Link Group Values for each Attribute List to be
associated with the Tunnel."
::= { fsMplsTeObjects 7}
fsTunnelAttributeSrlgEntry OBJECT-TYPE
SYNTAX FsTunnelAttributeSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents Shared Risk Link Group Values
associated with a attribute list."
INDEX { fsTunnelAttributeIndex,
fsTunnelAttributeSrlgNo
}
::= { fsTunnelAttributeSrlgTable 1 }
FsTunnelAttributeSrlgEntry ::= SEQUENCE {
fsTunnelAttributeSrlgNo Unsigned32,
fsTunnelAttributeSrlgRowStatus RowStatus
}
fsTunnelAttributeSrlgNo OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies an SRLG constraint associated with a Attribute
list. An SRLG is identified with a 32-bit number that is unique within
an IGP domain. Zero is a valid SRLG number."
::= { fsTunnelAttributeSrlgEntry 1}
fsTunnelAttributeSrlgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or delete a row in this
table."
::= { fsTunnelAttributeSrlgEntry 2}
-- End of fsTunnelAttributeSrlgTable
-- Start of fsMplsTunnelHopTable
fsMplsTunnelHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMplsTunnelHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fsMplsTunnelHopTable extends the mplsTunnelHopTable of
MPLS-TE-STD-MIB. This table has the additional Constraint that needs
to be considered when calculating the path to reach the
destination."
::= { fsMplsTeObjects 8}
fsMplsTunnelHopEntry OBJECT-TYPE
SYNTAX FsMplsTunnelHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents additions to a tunnel hop defined
in mplsTunnelHopEntry. This entry is valid only at the Ingress of the
tunnel and this table is configured only by the network Administrator."
AUGMENTS { mplsTunnelHopEntry}
::= { fsMplsTunnelHopTable 1 }
FsMplsTunnelHopEntry ::= SEQUENCE {
fsMplsTunnelHopIncludeAny TruthValue
}
fsMplsTunnelHopIncludeAny OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is set to true, then this indicates that this hop is
configured as an include any node.
If a hop in the table is
configured as include any, then it overrides the configuration of
mplsTunnelHopInclude object.
If a hop in the table is configured as include any, then
none of the hops should be configured with mplsTunnelHopType object.
Conversely, If any of the hop in the table is configured with
mplsTunnelHopType object, fsMplsTunnelHopIncludeAny object should not
be configured.
The default value of this object is 'false'."
DEFVAL { false }
::= { fsMplsTunnelHopEntry 1 }
-- End of fsMplsTunnelHopTable
-- Notify Message Traps START
fsGmplsTunnelNotifyErrorTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is true, then it enables the generation of traps
when a Notify Message is received, otherwise these traps are not
emitted."
DEFVAL { false }
::= { fsMplsTeScalarObjects 1 }
fsGmplsTunnelNotifyErrorTrap NOTIFICATION-TYPE
OBJECTS {
gmplsTunnelErrorReporterType,
gmplsTunnelErrorReporter,
gmplsTunnelErrorCode,
gmplsTunnelErrorSubcode
}
STATUS current
DESCRIPTION
"This trap is generated when a Notify Message is received
indicating that an error has happened on one of the nodes.
The objects in this trap provide additional error
information that indicates the reason for which the Notify
Message has been received.
The generation of this trap is subject to the control of
fsGmplsTunnelNotifyErrorTrapEnable. When this object is set
to false(2), then the notification must not be issued."
::= { fsMplsTeNotifications 1 }
fsGmplsTunnelAdminStatusFlagsTrap NOTIFICATION-TYPE
OBJECTS {
gmplsTunnelAdminStatusFlags
}
STATUS current
DESCRIPTION
"This trap is being generated for the Admin Status Flags
indicating that the Admin Status is changed on the node."
::= { fsMplsTeNotifications 2 }
--Notify Message Traps END
END