WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

Commit version 24.12.13800

Browse Source
This commit is contained in:
Chris Hammer
2025-01-06 17:35:06 -05:00
parent b7f6a79c2c
commit 55d9218816
6133 changed files with 4239740 additions and 1374287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

557
mibs/aricent/ARICENT-RTM6MI-MIB Normal file
View File

@ -0,0 +1,557 @@
-- Copyright (C) 2009-2012 Aricent Group . All Rights Reserved
-- /*****************************************************************
-- * *
-- * $RCSfile: fsmirtm6.mib,v $ *
-- * *
-- * $Date: 2015/10/19 12:19:52 $ *
-- * *
-- * $Revision: 1.7 $ *
-- * *
-- ****************************************************************/
ARICENT-RTM6MI-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, IpAddress,
Integer32, Unsigned32, enterprises FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC;
fsMIRtm6 MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION " This mib module is for RTMv6
module with virtual routing and forwarding support"
REVISION "201209050000Z"
DESCRIPTION " This mib module is for RTMv6
module with virtual routing and forwarding support"
::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 32}
fsMIRtm6Scalar OBJECT IDENTIFIER ::= { fsMIRtm6 1 }
-- RTMv6 SCALAR VARIABLE
fsMIRtm6GlobalTrace OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a global RTMv6 trace and not specific to any RTMv6 context.
Enables the tracing in the selected submodule in RTM6. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 5 - All Failure trace.
The remaining bits are unused.The combination of levels and submodules
are allowed i.e. Tracing can be allowed at all failure and data path
level in All submodules by setting the BIT appropriately."
::= { fsMIRtm6Scalar 1 }
fsMIRtm6ThrotLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In RTM6 operations which hogs CPU for a long time are being throttled.
These events will process only limited number of routes set by this
object for each iteration. Typically, the values used shall be
in the range 1..65535"
DEFVAL { 1000 }
::= { fsMIRtm6Scalar 2 }
fsMIRtm6MaximumBgpRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object configures the number of BGP routes to
be programmed in RTM6"
::= { fsMIRtm6Scalar 3 }
fsMIRtm6MaximumOspfRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object configures the number of OSPF routes to
be programmed in RTM6"
::= { fsMIRtm6Scalar 4 }
fsMIRtm6MaximumRipRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object configures the number of RIP routes to
be programmed in RTM6"
::= { fsMIRtm6Scalar 5 }
fsMIRtm6MaximumStaticRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object configures the number of STATIC routes to
be programmed in RTM6"
::= { fsMIRtm6Scalar 6 }
fsMIRtm6MaximumISISRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object configures the number of ISIS routes to
be programmed in RTM6"
::= { fsMIRtm6Scalar 7 }
-- RTMv6 Table
fsMIRtm6Table OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIRtm6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the parameters
of RTMv6's Virtual context"
::= { fsMIRtm6 2 }
fsMIRtm6Entry OBJECT-TYPE
SYNTAX FsMIRtm6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the parameters
of one of the RTMv6's virtual context"
INDEX { fsMIRtm6ContextId }
::= { fsMIRtm6Table 1 }
FsMIRtm6Entry ::=
SEQUENCE {
fsMIRtm6ContextId
Integer32,
fsMIRrd6RouterId
IpAddress,
fsMIRrd6FilterByOspfTag
INTEGER,
fsMIRrd6FilterOspfTag
Integer32,
fsMIRrd6FilterOspfTagMask
Integer32,
fsMIRrd6RouterASNumber
Integer32,
fsMIRrd6AdminStatus
INTEGER,
fsMIRrd6Trace
Unsigned32,
fsMIRtm6StaticRouteDistance
Integer32
}
fsMIRtm6ContextId OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit unique context id identifing the RTMv6 virtual Context
Minimum value of context ID is 0 (this is for defualt
Virtual context. The Max context ID is system dependent
and the value is taken care in virtual context manager MIB"
::= { fsMIRtm6Entry 1 }
fsMIRrd6RouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 4-byte Identifier value that uniquely identifies
the router in its operational environment. This can
be set only if the fsMIRrd6AdminStatus is disabled.
Router ID is configured for each RTMv6 Virtual context"
::= { fsMIRtm6Entry 2 }
fsMIRrd6FilterByOspfTag OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable distribution of routes based on the tag value
(ref RFC1745 sec 2.1). This filter takes precedence over the
common RRD6 control table."
DEFVAL { disable }
::= { fsMIRtm6Entry 3 }
fsMIRrd6FilterOspfTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tag based on which routes have to be filtered for
export to routing protocols"
::= { fsMIRtm6Entry 4 }
fsMIRrd6FilterOspfTagMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bitmask to be applied to fsMIRrd6FilterOspfTag for comparison.
This bitmask specifies the fields of the OSPF tag to be
considered for filtering."
DEFVAL { -1 }
::= { fsMIRtm6Entry 5 }
fsMIRrd6RouterASNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Autonomous system number in which this router is running."
DEFVAL { 0 }
::= { fsMIRtm6Entry 6 }
fsMIRrd6AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Admin status of the RTMv6 virtual context. This object can be set to
enabled only after setting the AS number and the Router ID to a valid
value."
DEFVAL { disabled }
::= { fsMIRtm6Entry 7 }
fsMIRrd6Trace OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to define the trace level in each RTMv6 virtual context.
Enables the tracing in the selected submodule in RTM6v6 context. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - OS Resource trace.
BIT 5 - All Failure trace.
The remaining bits are unused.The combination of levels and submodules
are allowed i.e. Tracing can be allowed at all failure and data path
level in All submodules by setting the BIT appropriately."
::= { fsMIRtm6Entry 8 }
fsMIRtm6StaticRouteDistance OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the default administrative distance for IPv6
static routes"
::= { fsMIRtm6Entry 9 }
fsMIRrd6ControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIRrd6ControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Control Table for configuring routes allowed/denied
for export in the RTMv6 virtual Context."
::= { fsMIRtm6 3 }
fsMIRrd6ControlEntry OBJECT-TYPE
SYNTAX FsMIRrd6ControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of fsMIRrd6ControlTable."
INDEX {
fsMIRtm6ContextId,
fsMIRrd6ControlDestIpAddress,
fsMIRrd6ControlNetMaskLen
}
::= { fsMIRrd6ControlTable 1 }
FsMIRrd6ControlEntry ::=
SEQUENCE {
fsMIRrd6ControlDestIpAddress
OCTET STRING,
fsMIRrd6ControlNetMaskLen
Integer32,
fsMIRrd6ControlSourceProto
INTEGER,
fsMIRrd6ControlDestProto
Integer32,
fsMIRrd6ControlRouteExportFlag
INTEGER,
fsMIRrd6ControlRowStatus
RowStatus
}
fsMIRrd6ControlDestIpAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route."
::= { fsMIRrd6ControlEntry 1 }
fsMIRrd6ControlNetMaskLen OBJECT-TYPE
SYNTAX Integer32 (1 .. 128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the prefix len and the derived reverse mask should be
logical-ANDed with the destination address. The mask is
also used to specify the range of IP addresses.
For Eg:
Destination Net = 128:11:: and
Net Mask Len = 32 (::255:255:255:255) specifies the range of
routes starting from 128:11:: to 121:11::255:255:255:255
For specifying all routes give
Destination Net = ::0 and Net Mask Len = 128"
::= { fsMIRrd6ControlEntry 2 }
fsMIRrd6ControlSourceProto OBJECT-TYPE
SYNTAX INTEGER {
all (0), -- any protocol
other (1), -- none of the following
local (2), -- interface entries
netmgmt (3), -- static route
ndisc (4), -- Redirect Routes
rip (5), -- RIPng
ospf (6), -- Open Shortest Path First
bgp (7), -- Border Gateway Protocol
idrp (8), -- InterDomain Routing Protocol
igrp (9) -- InterGateway Routing Protocol
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Identifier of the source routing protocol.
A value of zero will be interpreted as 'any', which matches route
from all protocols. This object should be set before
fsMIRrd6ControlRouteExportFlag is configured. For an ALL ROUTE entry,
this value must be always 0"
DEFVAL { 0 }
::= { fsMIRrd6ControlEntry 3}
fsMIRrd6ControlDestProto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The identifier of the destination routing protocol.
This field is a bit mask, a 1 indicates that the route
has to be exported to the routing protocol corresponding
to the bit-position.
+---------------------------------------------------+
| reserved | reserved | reserved | reserved |
+---------------------------------------------------+
| 15 | 14 | 13 | 12 |
+---------------------------------------------------+
| reserved | reserved | reserved | igrp |
+---------------------------------------------------+
| 11 | 10 | 9 | 8 |
+---------------------------------------------------+
| idrp | bgp | ospf | rip |
+---------------------------------------------------+
| 7 | 6 | 5 | 4 |
+---------------------------------------------------+
| ndisc | netmgmt | local | other |
+---------------------------------------------------+
| 3 | 2 | 1 | 0 |
+---------------------------------------------------+
A value of zero will be interpreted as 'any', which matches route
destinated to all protocols. This object should be set before
fsMIRrd6ControlRouteExportFlag is configured. For an ALL ROUTE entry,
this value must be always 0."
DEFVAL { 0 }
::= { fsMIRrd6ControlEntry 4}
fsMIRrd6ControlRouteExportFlag OBJECT-TYPE
SYNTAX INTEGER {
permit (1),
deny (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag specifies whether the route is allowed for export or
denied. If the ALL ROUTE entry has this value as permit, then all
other entries can be set only as deny and vice-versa.
Changing the status of the ALL ROUTE entry is possible only when
there is no other filter configuration exists."
::= { fsMIRrd6ControlEntry 5}
fsMIRrd6ControlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row by which a new row can be created or deleted
according to the SMIv2 conventions. The values supported for set
operation are - createandwait, active, destroy. Creation/Deletion
of the ALL ROUTE entry is possible only when there is no other
filter configuration exists."
::= { fsMIRrd6ControlEntry 6 }
--Routing Protocol Registration table.
fsMIRrd6RoutingProtoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIRrd6RoutingProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Registration Table for the different routing protocols.
This table is read-only and reflects the information of
routing protocols held by the Route Table Manager."
::= { fsMIRtm6 4 }
fsMIRrd6RoutingProtoEntry OBJECT-TYPE
SYNTAX FsMIRrd6RoutingProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in to the fsMIRrd6RoutingProtoTable."
INDEX {
fsMIRtm6ContextId,
fsMIRrd6RoutingProtoId
}
::= { fsMIRrd6RoutingProtoTable 1 }
FsMIRrd6RoutingProtoEntry ::=
SEQUENCE {
fsMIRrd6RoutingProtoId
INTEGER,
fsMIRrd6RoutingRegnId
Integer32,
fsMIRrd6RoutingProtoTaskIdent
OCTET STRING,
fsMIRrd6RoutingProtoQueueIdent
OCTET STRING,
fsMIRrd6AllowOspfAreaRoutes
INTEGER,
fsMIRrd6AllowOspfExtRoutes
INTEGER
}
fsMIRrd6RoutingProtoId OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- none of the following
local (2), -- interface entries
netmgmt (3), -- static route
ndisc (4), -- Redirect Routes
rip (5), -- RIPng
ospf (6), -- Open Shortest Path First
bgp (7), -- Border Gateway Protocol
idrp (8), -- InterDomain Routing Protocol
igrp (9) -- InterGateway Routing Protocol
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Identifier of the routing protocol registered
with the routing table manager"
::= { fsMIRrd6RoutingProtoEntry 1 }
fsMIRrd6RoutingRegnId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Registeration ID assigned by the RTM for this Routing Protocol "
::= { fsMIRrd6RoutingProtoEntry 2 }
fsMIRrd6RoutingProtoTaskIdent OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name/Identifier of the Routing Task"
::= { fsMIRrd6RoutingProtoEntry 3 }
fsMIRrd6RoutingProtoQueueIdent OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name/Identifier of the Message Queue to which messages
to the Routing Task are posted."
::= { fsMIRrd6RoutingProtoEntry 4 }
fsMIRrd6AllowOspfAreaRoutes OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A single configuration to PERMIT all OSPF inter-area and intra-area
address/mask pairs to be exported into this routing protocol.
This configuration takes precedence over filtering based on
the control table. "
DEFVAL { disable }
::= { fsMIRrd6RoutingProtoEntry 5 }
fsMIRrd6AllowOspfExtRoutes OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A single configuration to PERMIT all OSPF Type 1 and Type 2
Exteral address/mask pairs to be exported into this routing protocol.
This configuration together with the control table, take care of
selective route export."
DEFVAL { disable }
::= { fsMIRrd6RoutingProtoEntry 6 }
fsMIRtm6RedTest OBJECT IDENTIFIER ::= { fsMIRtm6 5 }
-- RTM6_RED TIME Group
-- This group defines objects for RTM6_RED TIME.
fsMIRtm6RedEntryTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when the node starts entering active state
from standby state "
::= { fsMIRtm6RedTest 1 }
fsMIRtm6RedExitTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when the node completes entering active state
from standby state "
::= { fsMIRtm6RedTest 2 }
END