WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

Commit version 24.12.13800

Browse Source
This commit is contained in:
Chris Hammer
2025-01-06 17:35:06 -05:00
parent b7f6a79c2c
commit 55d9218816
6133 changed files with 4239740 additions and 1374287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

730
mibs/aricent/ARICENT-L2IPV6SNP-MIB Normal file
View File

@ -0,0 +1,730 @@
-- Copyright (C) 2007-2012 Aricent Group . All Rights Reserved
-- $Id: fsl2ipv6snp.mib,v 1.5 2018/06/04 09:52:05 $
-- This MIB is to configure the IPV6 control packet snooping feature in a Layer2 switch
-- (a) This mib supports Router Advertisement message snooping for the purpose of IPv6 RA-Guard feature
-- The RA guard feature validates the RA messages and blocks the illegitimate RA Messsages in the layer 2 switch
ARICENT-L2IPV6SNP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
enterprises, IpAddress, Counter32,
Integer32, Unsigned32 FROM SNMPv2-SMI
RowStatus, MacAddress FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB;
fsIpv6Snp MODULE-IDENTITY
LAST-UPDATED "201806180000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION
" The proprietary MIB for IPV6 control packet Snooping in Layer2 Switch.
(a) Used to maintain the policy information to validate the RA messages and forward/block
the same"
REVISION "201806180000Z"
DESCRIPTION
"The first version of the mib "
::= { enterprises aricent-communication-holding-ltd(29601)
iss(2) 122}
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
VlanList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlan 1 through
8, the second octet specifying vlan 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered vlan id, and the least significant bit
represents the highest numbered vlan. Thus, each vlan
of the port is represented by a single bit within the
value of this object. If that bit has a value of '1',
then that vlan is included in the Vlan list; the vlan
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
Ipv6AddressPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network
byte-order."
SYNTAX OCTET STRING (SIZE (16))
-- ***************************************************************************
-- Groups in the MIB
-- ***************************************************************************
fsIpv6SnpSystem OBJECT IDENTIFIER ::= { fsIpv6Snp 1 }
fsIpv6SnpRagPolicy OBJECT IDENTIFIER ::= { fsIpv6Snp 2 }
-- fsL2Ipv6System BEGIN
fsIpv6SnpSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpv6SnpSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Switch context specific parameters for IPv6 control packet snooping related features in
Layer2 switch"
::= { fsIpv6SnpSystem 1 }
fsIpv6SnpSystemEntry OBJECT-TYPE
SYNTAX FsIpv6SnpSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry contains the fields ralated to RA-Guard feature enable/disable, traces"
INDEX { fsIpv6SnpContexId }
::= { fsIpv6SnpSystemTable 1 }
FsIpv6SnpSystemEntry ::= SEQUENCE {
fsIpv6SnpContexId Integer32,
fsIpv6SnpSystemControl INTEGER,
fsIpv6SnpRagStatus INTEGER,
fsIpv6SnpTraceLevel Integer32
}
fsIpv6SnpContexId OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies switch virtual context "
::= { fsIpv6SnpSystemEntry 1 }
fsIpv6SnpSystemControl OBJECT-TYPE
SYNTAX INTEGER {
start(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The Administrative system control status of IPv6 control packet snooping module.
start : Indicates that all resource required for this module
are allocated. Configurations are allowed.
shutdown : Indicates that all resource required for this module
are released. No configurations are allowed . "
DEFVAL { start }
::= { fsIpv6SnpSystemEntry 2 }
fsIpv6SnpRagStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Object to enable/disable the RA Guard feature in the switch instance"
DEFVAL { disable }
::= { fsIpv6SnpSystemEntry 3 }
fsIpv6SnpTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is to enable/disable the trace statements in IPv6 control packet snooping module
The mapping between bit position and the level of trace is
as follows:
BIT 1 - Indicates all Traces
BIT 2 - Indicates packet level Trace
BIT 3 - Indicates Failure Traces
BIT 4 - Indicates Management Traces "
DEFVAL { 4 }
::= { fsIpv6SnpSystemEntry 4 }
-- fsL2Ipv6System END
----------------------------------
-- RA Guard policy Table BEGIN
----------------------------------
fsIpv6SnpRagPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpv6SnpRagPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains policy match criteria to validate the legitimagte RA messages "
::= { fsIpv6SnpRagPolicy 1 }
fsIpv6SnpRagPolicyEntry OBJECT-TYPE
SYNTAX FsIpv6SnpRagPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry contains the policy details. "
INDEX { fsIpv6SnpRagPolicyId }
::= { fsIpv6SnpRagPolicyTable 1 }
FsIpv6SnpRagPolicyEntry ::= SEQUENCE {
fsIpv6SnpRagPolicyId Integer32,
fsIpv6SnpRagDeviceRole INTEGER,
fsIpv6SnpRagMbit INTEGER,
fsIpv6SnpRagObit INTEGER,
fsIpv6SnpMatchRagAclId Integer32,
fsIpv6SnpMatchRagPrefixListId Integer32,
fsIpv6SnpMatchRagSrcIp6ListId Integer32,
fsIpv6SnpRagHopLimit INTEGER,
fsIpv6SnpRagRouterPreference INTEGER,
fsIpv6SnpRagPolicyRowStatus RowStatus
}
fsIpv6SnpRagPolicyId OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates the RA Guard Policy id. "
::= { fsIpv6SnpRagPolicyEntry 1 }
fsIpv6SnpRagDeviceRole OBJECT-TYPE
SYNTAX INTEGER {
host(1),
router(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the role of the device
host mode : All RA messages are disallowed and will be dropped
Rotuer mode: RA messages are validated against the policy. "
DEFVAL { router }
::= { fsIpv6SnpRagPolicyEntry 2 }
fsIpv6SnpRagMbit OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enables verification of the advertised 'managed address
configuration flag' to be on / off
None : Indicates that validation of this field in RA message will be bypassed."
DEFVAL { none }
::= { fsIpv6SnpRagPolicyEntry 3 }
fsIpv6SnpRagObit OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enables verification of the advertised 'other
configuration flag' to be on / off
None : Indicates that validation of this field in RA message will be bypassed."
DEFVAL { none }
::= { fsIpv6SnpRagPolicyEntry 4 }
fsIpv6SnpMatchRagAclId OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configures the access list for the policy entry which is used to validate the
source link layer address carried by RA message.
Value 0 indicates that no access list is associated to the policy entry. "
DEFVAL { 0 }
::= { fsIpv6SnpRagPolicyEntry 5 }
fsIpv6SnpMatchRagPrefixListId OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configures the prefix list Id used to validate the
source ipv6 address prefixes carried by RA message.
Value 0 indicates that no IPV6 prefix list is associated to the policy entry. "
DEFVAL { 0 }
::= { fsIpv6SnpRagPolicyEntry 6 }
fsIpv6SnpMatchRagSrcIp6ListId OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configures the Src Ip6 list Id used to validate the
source ipv6 address carried by RA message.
Value 0 indicates that no Src Ip6 list is associated to the policy entry. "
DEFVAL { 0 }
::= { fsIpv6SnpRagPolicyEntry 7 }
fsIpv6SnpRagHopLimit OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Value 0: Indicates that validation of this field in RA message will be bypassed
Enables the validation of advertised hoplimit carried by RA massage and the values will be as below
Value 255: Indicates that the received RA message should have the maximum hop limit value as 255
Value 1-254 : Indicates that the received RA message should contain a hop limit value lesser than or
equal to the configured hop limit value."
DEFVAL { 0 }
::= { fsIpv6SnpRagPolicyEntry 8 }
fsIpv6SnpRagRouterPreference OBJECT-TYPE
SYNTAX INTEGER {
medium(0),
high(1),
none(2),
low(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enables the validation of advertised router preference carried by RA massage to be low/medium/high.
None : Indicates that validation of this field in RA message will be bypassed "
DEFVAL { none }
::= { fsIpv6SnpRagPolicyEntry 9 }
fsIpv6SnpRagPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object is used to create or delete the entry in the RAG policy table."
::= { fsIpv6SnpRagPolicyEntry 10 }
-- RA Guard policy Table END
-----------------------------------
-- RA Guard Access list Table BEGIN
-----------------------------------
fsIpv6SnpRagACLTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpv6SnpRagAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains access list information to be
set as match criteria in the RA Guard policy table
to validate the incoming RA message "
::= { fsIpv6SnpRagPolicy 2 }
fsIpv6SnpRagAclEntry OBJECT-TYPE
SYNTAX FsIpv6SnpRagAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry contains the information about access list "
INDEX { fsIpv6SnpRagAclNo , fsIpv6SnpRagAclEntryNo }
::= { fsIpv6SnpRagACLTable 1 }
FsIpv6SnpRagAclEntry ::= SEQUENCE {
fsIpv6SnpRagAclNo Integer32,
fsIpv6SnpRagAclEntryNo Integer32,
fsIpv6SnpRagAclSrcMacAddress MacAddress,
fsIpv6SnpRagAclRowStatus RowStatus
}
fsIpv6SnpRagAclNo OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates the acl number for this entry.
This acl number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry. "
::= { fsIpv6SnpRagAclEntry 1 }
fsIpv6SnpRagAclEntryNo OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates an entry associated with the acl number.
For a single acl number, many entries can be created. Thus several MAC addresses can be associated to
an acl number."
::= { fsIpv6SnpRagAclEntry 2 }
fsIpv6SnpRagAclSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source Mac address associated with the acl-id. "
::= { fsIpv6SnpRagAclEntry 3 }
fsIpv6SnpRagAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object is used to create or delete entry in the RA guard acl table. "
::= { fsIpv6SnpRagAclEntry 4 }
-- RA Guard Access list Table END
------------------------------------
-- RA Guard Prefix list Table BEGIN
------------------------------------
fsipv6SnpRagPrefixListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpv6SnpRagPrefixListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains Ipv6 address Prefix list information that can be
set as match criteria in the RA Guard policy entry.
This can be used for validating the ipv6 address prefixes carried by incoming RA messages. "
::= { fsIpv6SnpRagPolicy 3 }
fsIpv6SnpRagPrefixListEntry OBJECT-TYPE
SYNTAX FsIpv6SnpRagPrefixListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry contains the Ipv6 address Prefixes used to validate the prefix information
carried in RA messages. "
INDEX { fsIpv6SnpRagPrefixListNo , fsIpv6SnpRagPrefixListEntryNo }
::= { fsipv6SnpRagPrefixListTable 1 }
FsIpv6SnpRagPrefixListEntry ::= SEQUENCE {
fsIpv6SnpRagPrefixListNo Integer32,
fsIpv6SnpRagPrefixListEntryNo Integer32,
fsIpv6SnpRagPrefixListPrefix Ipv6AddressPrefix,
fsIpv6SnpRagPrefixListLength Integer32,
fsIpv6SnpRagPrefixListGe Integer32,
fsIpv6SnpRagPrefixListLe Integer32,
fsIpv6SnpRagPrefixListRowStatus RowStatus
}
fsIpv6SnpRagPrefixListNo OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates the Prefix-list number of this entry.
This prefix-list number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry. "
::= { fsIpv6SnpRagPrefixListEntry 1 }
fsIpv6SnpRagPrefixListEntryNo OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates entry number for each prefix.
For a single prefix-list number, many entries can be created. Thus several prefixes can be associated to
a prefix-list number."
::= { fsIpv6SnpRagPrefixListEntry 2 }
fsIpv6SnpRagPrefixListPrefix OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ipv6 prefix value of this entry."
::= { fsIpv6SnpRagPrefixListEntry 3 }
fsIpv6SnpRagPrefixListLength OBJECT-TYPE
SYNTAX Integer32(1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates prefix length for each Ipv6 prefix "
::= { fsIpv6SnpRagPrefixListEntry 4 }
fsIpv6SnpRagPrefixListGe OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Minimum prefix length to be matched
Value 0 indicates that no miminum prefix lenth, and this check would be bypassed "
DEFVAL { 0 }
::= { fsIpv6SnpRagPrefixListEntry 5 }
fsIpv6SnpRagPrefixListLe OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Maximum prefix length to be matched
Value 0 indicates that no maximum prefix lenth, and this check would be bypassed "
DEFVAL { 0 }
::= { fsIpv6SnpRagPrefixListEntry 6 }
fsIpv6SnpRagPrefixListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object is used to create or delete entry in the prefix list table. "
::= { fsIpv6SnpRagPrefixListEntry 7 }
-- RA Guard Prefix list Table END
----------------------------------
-- RA Guard Interface Table BEGIN
----------------------------------
fsIpv6SnpRagPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpv6SnpRagInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains RA Guard interface specific configurations."
::= { fsIpv6SnpRagPolicy 4 }
fsIpv6SnpRagPortEntry OBJECT-TYPE
SYNTAX FsIpv6SnpRagInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row in this table contains the RA guard configuration information for
the interface."
INDEX { fsIpv6SnpRagPortNumber }
::= { fsIpv6SnpRagPortTable 1 }
FsIpv6SnpRagInterfaceEntry ::= SEQUENCE {
fsIpv6SnpRagPortNumber Integer32,
fsIpv6SnpRagPortStatus INTEGER,
fsIpv6SnpRagPortPolicyId INTEGER,
fsIpv6SnpRagPortMode INTEGER,
fsIpv6SnpRagPortCurrentState INTEGER,
fsIpv6SnpRagPortTriggerStateChange INTEGER,
fsIpv6SnpRagPortLearnTime Integer32,
fsIpv6SnpRagPortTrustState INTEGER,
fsIpv6SnpRagPortVlanlist VlanList,
fsIpv6SnpRagPortRowStatus RowStatus
}
fsIpv6SnpRagPortNumber OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the inteface index for which RA guard configurations are applied."
::= { fsIpv6SnpRagPortEntry 1 }
fsIpv6SnpRagPortStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to enable/disable the RA Guard feature on the port "
DEFVAL { disable }
::= { fsIpv6SnpRagPortEntry 2 }
fsIpv6SnpRagPortPolicyId OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates RA Guard policy ID applied to the interface.
A value of 0 indicates that no policy is applied on the interface."
DEFVAL { 0 }
::= { fsIpv6SnpRagPortEntry 3 }
fsIpv6SnpRagPortMode OBJECT-TYPE
SYNTAX INTEGER {
stateless(1),
stateful(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the mode in which RA Guard functions on this interface.
It can be stateful or stateless."
DEFVAL { stateless }
::= { fsIpv6SnpRagPortEntry 4 }
fsIpv6SnpRagPortCurrentState OBJECT-TYPE
SYNTAX INTEGER {
na(0),
learn(1),
forward(2),
block(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates current state of the RA Guard on port while operating in stateful mode.
In stateless mode of operation, this object is not applicble and indicates a value 'na'."
DEFVAL { na }
::= { fsIpv6SnpRagPortEntry 5 }
fsIpv6SnpRagPortTriggerStateChange OBJECT-TYPE
SYNTAX INTEGER {
none(0),
learn(1),
forward(2),
block(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This objects allows manual triggering for movement of port state to learning/forwarding or blocking.
This object is applicable when RA guard feature works in stateful mode on the interface."
DEFVAL { none }
::= { fsIpv6SnpRagPortEntry 6 }
fsIpv6SnpRagPortLearnTime OBJECT-TYPE
SYNTAX Integer32(180..900)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" When the port state change is triggered to 'learn', the port remains in the learning state for the 'Learn Time'
duration. After this time, the port state moves to 'forwarding' state if legitimate RA messages are
received on the interface.
In case if any illegitimate RA messages are received on the interface during the learning period,
the interface is immediately moved to 'blocking' state for RA messaged.
This object is applicable when RA guard feature works in stateful mode on the interface
and the PortState is configured as learning."
DEFVAL { 240 }
::= { fsIpv6SnpRagPortEntry 7 }
fsIpv6SnpRagPortTrustState OBJECT-TYPE
SYNTAX INTEGER {
trusted(1),
untrusted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates RA guard port trust state as trusted/untrusted.
trusted : RA messages will be forwarded without any validation
untrusted : RA messages will be forwarded based on the RA guard policy validation on the interface "
DEFVAL { untrusted }
::= { fsIpv6SnpRagPortEntry 8 }
fsIpv6SnpRagPortVlanlist OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the list of VLAN on which the RA guard feature is applicable.
When VLAN list is NULL, the RA guard configurations are applicable at port level and for all VLANs on the port.
When VLAN list is configured, the RA guard will be applicable only for the set of VLANs.
If RA messages are received on other VLANs, RA guard feature will not be applied. "
::= { fsIpv6SnpRagPortEntry 9 }
fsIpv6SnpRagPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object is used to create or delete entry in the table "
::= { fsIpv6SnpRagPortEntry 10 }
-- RA Guard Interface Table END
---------------------------------------
-- RA Guard SourceIPv6 List Table BEGIN
---------------------------------------
fsIPv6SnpRagSrcIPv6ListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpv6SnpRagSrcIPv6ListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains Src Ipv6 Prefix List information that can
be set as match criteria in the RA Guard policy entry.
This can be used for validating the Src IPv6 carried by
incoming RA messages."
::= { fsIpv6SnpRagPolicy 5 }
fsIpv6SnpRagSrcIPv6ListEntry OBJECT-TYPE
SYNTAX FsIpv6SnpRagSrcIPv6ListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry contains the Src Ipv6 Prefixes used to validate the prefix information
carried in RA messages."
INDEX { fsIpv6SnpRagSrcIPv6ListNo , fsIpv6SnpRagSrcIPv6EntryNo }
::= { fsIPv6SnpRagSrcIPv6ListTable 1 }
FsIpv6SnpRagSrcIPv6ListEntry ::= SEQUENCE {
fsIpv6SnpRagSrcIPv6ListNo Integer32,
fsIpv6SnpRagSrcIPv6EntryNo Integer32,
fsIpv6SnpRagSrcIPv6Addr Ipv6AddressPrefix,
fsIpv6SnpRagSrcIPv6PrefixLength Integer32,
fsIpv6SnpRagSrcIPv6RowStatus RowStatus
}
fsIpv6SnpRagSrcIPv6ListNo OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Src IPv6 Prefix-list number of this entry
The Src IPv6 Prefix List number can be mapped to RA Guard policy entry to
configure the matching criteria for the policy entry."
::= { fsIpv6SnpRagSrcIPv6ListEntry 1 }
fsIpv6SnpRagSrcIPv6EntryNo OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates entry number for each Src IPv6 prefix.
For a single Src IPv6 prefix-list number, many entries can be created. Thus several
Src IPv6 prefixes can be associated to a prefix-list number."
::= { fsIpv6SnpRagSrcIPv6ListEntry 2 }
fsIpv6SnpRagSrcIPv6Addr OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Src Ipv6 prefix value of this entry "
::= { fsIpv6SnpRagSrcIPv6ListEntry 3 }
fsIpv6SnpRagSrcIPv6PrefixLength OBJECT-TYPE
SYNTAX Integer32(1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates prefix length for each Src Ipv6 prefix "
::= { fsIpv6SnpRagSrcIPv6ListEntry 4 }
fsIpv6SnpRagSrcIPv6RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object is used to create or delete entry in the Src IPv6 Prefix List table. "
::= { fsIpv6SnpRagSrcIPv6ListEntry 5 }
-- RA Guard Access list Table END
END