Commit version 24.12.13800
This commit is contained in:
782
mibs/aricent/ARICENT-ISS-EXT-MIB
Normal file
782
mibs/aricent/ARICENT-ISS-EXT-MIB
Normal file
@ -0,0 +1,782 @@
|
||||
-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved
|
||||
|
||||
-- $Id: fsissext.mib,v 1.11 2012/09/07 09:52:14 siva Exp $
|
||||
|
||||
ARICENT-ISS-EXT-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE,
|
||||
Counter32, enterprises, IpAddress, Integer32, Unsigned32
|
||||
FROM SNMPv2-SMI
|
||||
RowStatus, TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC;
|
||||
|
||||
issExt MODULE-IDENTITY
|
||||
LAST-UPDATED "201209050000Z"
|
||||
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
||||
CONTACT-INFO "support@aricent.com"
|
||||
DESCRIPTION
|
||||
"The MIB for FutureISSExtension."
|
||||
REVISION "201209050000Z"
|
||||
DESCRIPTION
|
||||
"The MIB for FutureISSExtension."
|
||||
::= { enterprises futuresoftware (2076) 81 8}
|
||||
|
||||
|
||||
PortList ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Each octet within this value specifies a set of eight
|
||||
ports, with the first octet specifying ports 1 through
|
||||
8, the second octet specifying ports 9 through 16, etc.
|
||||
Within each octet, the most significant bit represents
|
||||
the lowest numbered port, and the least significant bit
|
||||
represents the highest numbered port. Thus, each port
|
||||
of the bridge is represented by a single bit within the
|
||||
value of this object. If that bit has a value of '1'
|
||||
then that port is included in the set of ports; the port
|
||||
is not included if its bit has a value of '0'."
|
||||
SYNTAX OCTET STRING
|
||||
|
||||
iss OBJECT IDENTIFIER ::= { enterprises 2076 81 }
|
||||
|
||||
-- ----------------------------------------------------------------- --
|
||||
-- groups in the MIB
|
||||
-- ----------------------------------------------------------------- --
|
||||
|
||||
issExtRateControl OBJECT IDENTIFIER ::= { issExt 1 }
|
||||
issExtL2Filter OBJECT IDENTIFIER ::= { issExt 2 }
|
||||
issExtL3Filter OBJECT IDENTIFIER ::= { issExt 3 }
|
||||
|
||||
-- Rate Control Group --------------------------------------------- --
|
||||
|
||||
issExtRateCtrlTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF IssExtRateCtrlEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table to control the rate limiting parameters
|
||||
either for the entire switch or for each physical and port-channel
|
||||
interface in the switch."
|
||||
::= { issExtRateControl 1 }
|
||||
|
||||
issExtRateCtrlEntry OBJECT-TYPE
|
||||
SYNTAX IssExtRateCtrlEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry appears in this table for each physical and port-channel
|
||||
interface in the switch."
|
||||
INDEX { issExtRateCtrlIndex }
|
||||
::= { issExtRateCtrlTable 1 }
|
||||
|
||||
IssExtRateCtrlEntry ::=
|
||||
SEQUENCE {
|
||||
issExtRateCtrlIndex
|
||||
Integer32,
|
||||
issExtRateCtrlDLFLimitValue
|
||||
Integer32,
|
||||
issExtRateCtrlBCASTLimitValue
|
||||
Integer32,
|
||||
issExtRateCtrlMCASTLimitValue
|
||||
Integer32,
|
||||
issExtRateCtrlPortRateLimit
|
||||
Integer32,
|
||||
issExtRateCtrlPortBurstSize
|
||||
Integer32
|
||||
}
|
||||
|
||||
issExtRateCtrlIndex OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..65535)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The interface index for which the configuration in this
|
||||
entry applies."
|
||||
::= { issExtRateCtrlEntry 1 }
|
||||
|
||||
issExtRateCtrlDLFLimitValue OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..2147483647)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Allows to configure the limiting value for the maximum number
|
||||
of dlf packets that can be transmitted per second over this interface.
|
||||
Setting this object to the value zero disables rate limiting for
|
||||
Destination lookup failure packets on this interface. The value that
|
||||
can be set for this object is limited by the underlying hardware"
|
||||
|
||||
DEFVAL {0}
|
||||
::= { issExtRateCtrlEntry 2 }
|
||||
|
||||
issExtRateCtrlBCASTLimitValue OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..2147483647)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Allows to configure the limiting value for the maximum number
|
||||
of broadcast packets that can be transmitted per second over this
|
||||
interface. Setting this object to the value zero disables rate
|
||||
limiting for Broadcast packets on this interface. The value that
|
||||
can be set for this object is limited by the underlying hardware"
|
||||
|
||||
DEFVAL {0}
|
||||
::= { issExtRateCtrlEntry 3 }
|
||||
|
||||
|
||||
issExtRateCtrlMCASTLimitValue OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..2147483647)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Allows to configure the limiting value for the maximum number
|
||||
of multicast packets that can be transmitted per second over this
|
||||
interface. Setting this object to the value zero disables rate
|
||||
limiting for Multicast packets on this interface. The value that
|
||||
can be set for this object is limited by the underlying hardware"
|
||||
|
||||
DEFVAL {0}
|
||||
::= { issExtRateCtrlEntry 4}
|
||||
|
||||
issExtRateCtrlPortRateLimit OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..80000000)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Configures interface Rate Limit (Packet that can be transferred
|
||||
on a port at a particular second).
|
||||
|
||||
This object's value will take effect on the interface speed. Based
|
||||
on the operating speed of the port, the rate limit will be applied.
|
||||
This value can also be affected by the metering. A value of zero(0)
|
||||
disable rate limiting i.e. sets the port to full speed."
|
||||
|
||||
::= { issExtRateCtrlEntry 5 }
|
||||
|
||||
issExtRateCtrlPortBurstSize OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..80000000)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Configures interface Burst Pkt Rate. (Packet Burst that can be
|
||||
transferred on a port at a particular second)
|
||||
|
||||
This object's value will take effect on the interface speed. Based
|
||||
on the operating speed of the port, the burst size of the port
|
||||
will be applied. This value can also be affected by the metering. A
|
||||
value of zero(0) disable burst rate limiting i.e. sets the port burst
|
||||
rate limit to full speed."
|
||||
|
||||
::= { issExtRateCtrlEntry 6 }
|
||||
|
||||
|
||||
|
||||
|
||||
-- ------------------------------------------------------------------
|
||||
-- L2 Filter Group --------------------------------------------------
|
||||
|
||||
issExtL2FilterTable OBJECT-TYPE
|
||||
|
||||
SYNTAX SEQUENCE OF IssExtL2FilterEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table to configure L2 filter rules in the system."
|
||||
::= { issExtL2Filter 1 }
|
||||
|
||||
issExtL2FilterEntry OBJECT-TYPE
|
||||
SYNTAX IssExtL2FilterEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Each entry in this table is a L2 filter rule.
|
||||
|
||||
Index to the table is the L2 filter number."
|
||||
INDEX { issExtL2FilterNo}
|
||||
::= { issExtL2FilterTable 1 }
|
||||
|
||||
IssExtL2FilterEntry ::=
|
||||
SEQUENCE {
|
||||
issExtL2FilterNo
|
||||
Integer32,
|
||||
issExtL2FilterPriority
|
||||
Integer32,
|
||||
issExtL2FilterEtherType
|
||||
Integer32,
|
||||
issExtL2FilterProtocolType
|
||||
Unsigned32,
|
||||
issExtL2FilterDstMacAddr
|
||||
MacAddress,
|
||||
issExtL2FilterSrcMacAddr
|
||||
MacAddress,
|
||||
issExtL2FilterVlanId
|
||||
Integer32,
|
||||
issExtL2FilterInPortList
|
||||
PortList,
|
||||
issExtL2FilterAction
|
||||
INTEGER,
|
||||
issExtL2FilterMatchCount
|
||||
Counter32,
|
||||
issExtL2FilterStatus
|
||||
RowStatus,
|
||||
issExtL2FilterOutPortList
|
||||
PortList,
|
||||
issExtL2FilterDirection
|
||||
INTEGER
|
||||
|
||||
}
|
||||
|
||||
issExtL2FilterNo OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..65535)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"L2 Filter rule number."
|
||||
::= { issExtL2FilterEntry 1 }
|
||||
|
||||
issExtL2FilterPriority OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..255)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The priority of the L2 filter can be used to decide which filter rule
|
||||
is applicable when
|
||||
--> the packet matches with more than one filter rules
|
||||
--> All the filter rules result in 'allow'ing the packet
|
||||
|
||||
Higher value of 'filter priority' implies a higher priority.
|
||||
|
||||
Usage of 'L2FilterPriority' is implementation dependant."
|
||||
DEFVAL { 1 }
|
||||
::= { issExtL2FilterEntry 2 }
|
||||
|
||||
issExtL2FilterEtherType OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..65535)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value in the Type/Len field of a frame that will
|
||||
be matched to trigger this filter. The default value of
|
||||
this object is '0'. When this object is SET with the default
|
||||
value, frames are not matched for the value in the Type/Len
|
||||
field with the value set for this object."
|
||||
DEFVAL { 0 }
|
||||
::= { issExtL2FilterEntry 3 }
|
||||
|
||||
|
||||
issExtL2FilterProtocolType OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (0..65535)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the non IP protocol type to be filtered.
|
||||
aarp | amber | dec-spanning | decnet-iv |
|
||||
diagnostic | dsm |etype-6000 | etype-8042 |
|
||||
lat | lavc-sca | mop-console | mop-dump |
|
||||
msdos | mumps | netbios | vines-echo |
|
||||
vines-ip | xns-idp: A non-IP protocol.
|
||||
|
||||
A value of '0' means, the filter is applicable for all protocols."
|
||||
DEFVAL { 0 }
|
||||
::= { issExtL2FilterEntry 4 }
|
||||
|
||||
issExtL2FilterDstMacAddr OBJECT-TYPE
|
||||
SYNTAX MacAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Destination MAC address to be matched with the packet. By Default, the
|
||||
Destination Mac Address will be zero which means dont care condition ie)
|
||||
any Dst Mac Address ."
|
||||
::= { issExtL2FilterEntry 5 }
|
||||
|
||||
issExtL2FilterSrcMacAddr OBJECT-TYPE
|
||||
SYNTAX MacAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source MAC address to be matched with the packet. By Default, the Source
|
||||
Mac Address will be zero which means dont care condition ie) any Src Mac
|
||||
address"
|
||||
::= { issExtL2FilterEntry 6 }
|
||||
|
||||
|
||||
issExtL2FilterVlanId OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..4094)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
|
||||
be treated as customer Vlan Id.
|
||||
A value of '0' means, this object is unused. Configuring this value is not
|
||||
allowed."
|
||||
DEFVAL { 0 }
|
||||
::= { issExtL2FilterEntry 7 }
|
||||
|
||||
|
||||
issExtL2FilterInPortList OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the complete set of ports over which this filter is applied
|
||||
for packets ingress at ports in this list.
|
||||
If the In port list is '0', the filter rule is applicable for the
|
||||
incoming packets on all ports.
|
||||
Even though the issExtL2FilterInPortList is configured, It is applicable only
|
||||
if issExtL2FilterDirection is configured as 'in'.
|
||||
By default inport list is maintained as '0'."
|
||||
::= { issExtL2FilterEntry 8 }
|
||||
|
||||
issExtL2FilterAction OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
allow (1),
|
||||
drop (2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the action to be taken on the packet if the filter
|
||||
rule matches.
|
||||
If the action is 'allow', the packet will be forwarded according
|
||||
to the forwarding rules.
|
||||
If the action is 'drop', the packet will be discarded."
|
||||
DEFVAL { allow }
|
||||
::= { issExtL2FilterEntry 9 }
|
||||
|
||||
issExtL2FilterMatchCount OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Number of times this filter is matched."
|
||||
|
||||
::= { issExtL2FilterEntry 10 }
|
||||
|
||||
issExtL2FilterStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the status of this entry. An entry is
|
||||
created in this table when this object is SET to 'createAndWait'.
|
||||
The entry in this table is used when the status of this object
|
||||
is SET 'active'. The entry in this table is not used when this
|
||||
object is SET 'notInService'. An entry created in this table is
|
||||
be deleted when this object is SET 'destroy'."
|
||||
::= { issExtL2FilterEntry 11 }
|
||||
|
||||
issExtL2FilterOutPortList OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the complete set of ports over which this filter is applied
|
||||
for packets egress at Ports in this list.
|
||||
If the Out port list is '0', the filter rule is applicable for the
|
||||
outgoing packets on all ports.
|
||||
Even though the issExtL2FilterOutPortList is configured, It is applicable only
|
||||
if issExtL2FilterDirection is configured as 'out'.
|
||||
By default outport list is maintained as '0'."
|
||||
::= { issExtL2FilterEntry 12 }
|
||||
|
||||
issExtL2FilterDirection OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
in (1),
|
||||
out (2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the direction of this filter to be applied. By Default the
|
||||
filter will be applied on ingress direction.
|
||||
When the direction of this filter is 'in', It is applied on specified
|
||||
ports of the issExtL2FilterInPortList.
|
||||
When the direction of this filter is 'out', It is applied on specified
|
||||
ports of the issExtL2FilterOutPortList."
|
||||
DEFVAL { in }
|
||||
::= { issExtL2FilterEntry 13 }
|
||||
|
||||
-- ------------------------------------------------------------------
|
||||
-- L3 Filter Group --------------------------------------------------
|
||||
|
||||
issExtL3FilterTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF IssExtL3FilterEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A table to configure L3 filter rules in the system.
|
||||
"
|
||||
::= { issExtL3Filter 1 }
|
||||
|
||||
issExtL3FilterEntry OBJECT-TYPE
|
||||
SYNTAX IssExtL3FilterEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Each entry in this table is a L3 filter rule.
|
||||
Index to the table is L3 filter number. "
|
||||
INDEX { issExtL3FilterNo}
|
||||
::= { issExtL3FilterTable 1 }
|
||||
|
||||
IssExtL3FilterEntry ::=
|
||||
SEQUENCE {
|
||||
issExtL3FilterNo
|
||||
Integer32,
|
||||
issExtL3FilterPriority
|
||||
Integer32,
|
||||
issExtL3FilterProtocol
|
||||
Integer32,
|
||||
issExtL3FilterMessageType
|
||||
Integer32,
|
||||
issExtL3FilterMessageCode
|
||||
Integer32,
|
||||
issExtL3FilterDstIpAddr
|
||||
IpAddress,
|
||||
issExtL3FilterSrcIpAddr
|
||||
IpAddress,
|
||||
issExtL3FilterDstIpAddrMask
|
||||
IpAddress,
|
||||
issExtL3FilterSrcIpAddrMask
|
||||
IpAddress,
|
||||
issExtL3FilterMinDstProtPort
|
||||
Unsigned32,
|
||||
issExtL3FilterMaxDstProtPort
|
||||
Unsigned32,
|
||||
issExtL3FilterMinSrcProtPort
|
||||
Unsigned32,
|
||||
issExtL3FilterMaxSrcProtPort
|
||||
Unsigned32,
|
||||
issExtL3FilterInPortList
|
||||
PortList,
|
||||
issExtL3FilterOutPortList
|
||||
PortList,
|
||||
issExtL3FilterAckBit
|
||||
INTEGER,
|
||||
issExtL3FilterRstBit
|
||||
INTEGER,
|
||||
issExtL3FilterTos
|
||||
Integer32,
|
||||
issExtL3FilterDscp
|
||||
Integer32,
|
||||
issExtL3FilterDirection
|
||||
INTEGER,
|
||||
issExtL3FilterAction
|
||||
INTEGER,
|
||||
issExtL3FilterMatchCount
|
||||
Counter32,
|
||||
issExtL3FilterStatus
|
||||
RowStatus
|
||||
}
|
||||
|
||||
issExtL3FilterNo OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..65535)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"L3 Filter rule number."
|
||||
::= { issExtL3FilterEntry 1 }
|
||||
|
||||
issExtL3FilterPriority OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..255)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The priority of the filter can be used to decide which filter rule
|
||||
is applicable when
|
||||
--> the packet matches with more than one filter rules
|
||||
--> All the filter rules result in 'allow'ing the packet
|
||||
Higher value of 'L3 filter priority' implies a higher priority.
|
||||
Usage of 'L3FilterPriority' is implementation dependant."
|
||||
DEFVAL { 1 }
|
||||
::= { issExtL3FilterEntry 2 }
|
||||
|
||||
issExtL3FilterProtocol OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..255)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The type of protocol to be checked against the packet. The
|
||||
default value is 255. If the value is 255, it means that the
|
||||
protocol type can be anything and it will not be checked to
|
||||
decide the action. "
|
||||
DEFVAL { 255 }
|
||||
::= { issExtL3FilterEntry 3 }
|
||||
|
||||
issExtL3FilterMessageType OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..65535)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The message type to be checked against the packet. If the
|
||||
message type matches with the packet, then the packet will be
|
||||
dropped / allowed based on the action set in issExtL3FilterAction.
|
||||
The default value is 255. It means that message type is not
|
||||
configured and need not be checked.
|
||||
Generally the value zero is given as default. But here
|
||||
zero can be an ICMP Type value. Hence 255 is given as the
|
||||
default value.
|
||||
Some ICMP message types are:
|
||||
echoReply(0),
|
||||
destinationUnreachable(3),
|
||||
sourceQuench(4),
|
||||
redirect(5),
|
||||
echoRequest(8),
|
||||
timeExceeded(11),
|
||||
parameterProblem(12),
|
||||
timestampRequest(13),
|
||||
timestampReply(14),
|
||||
informationRequest(15),
|
||||
informationReply(16),
|
||||
addressMaskRequest(17),
|
||||
addressMaskReply (18),
|
||||
noICMPType(255)
|
||||
"
|
||||
DEFVAL { 255 }
|
||||
::= { issExtL3FilterEntry 4 }
|
||||
|
||||
issExtL3FilterMessageCode OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..65535)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The message code to be checked against the packet. If the
|
||||
packet matches with the message code, then the packet will
|
||||
be dropped / allowed based on the action set in issExtL3FilterAction.
|
||||
The default value is 255. It means that message code is not
|
||||
configured and need not be checked. Generally the value zero
|
||||
will be given as default. But here, zero can be an ICMP Code
|
||||
value. Hence 255 is given as the default value.
|
||||
Some ICMP message codes are :
|
||||
networkUnreachable(0),
|
||||
hostUnreachable(1),
|
||||
protocolUnreachable(2),
|
||||
portUnreachable(3),
|
||||
fragmentNeed(4),
|
||||
sourceRouteFail(5),
|
||||
destNetworkUnknown(6),
|
||||
destHostUnknown(7),
|
||||
srcHostIsolated(8),
|
||||
destNetworkAdminProhibited(9),
|
||||
destHostAdminProhibited(10),
|
||||
networkUnreachableTOS(11),
|
||||
hostUnreachableTOS(12),
|
||||
noICMPCode(255)
|
||||
"
|
||||
DEFVAL { 255 }
|
||||
::= { issExtL3FilterEntry 5 }
|
||||
|
||||
issExtL3FilterDstIpAddr OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Destination IP address to be matched with the packet.
|
||||
This object is valid only if the 'issExtFilterType' is 'l3filter'."
|
||||
DEFVAL { '00000000'h }
|
||||
::= { issExtL3FilterEntry 6 }
|
||||
|
||||
issExtL3FilterSrcIpAddr OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source IP address to be matched with the packet.
|
||||
This object is valid only if the 'issExtFilterType' is 'l3filter'."
|
||||
DEFVAL { '00000000'h }
|
||||
::= { issExtL3FilterEntry 7 }
|
||||
|
||||
issExtL3FilterDstIpAddrMask OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The IP subnet mask for Destination IP address.
|
||||
This object is valid only if the 'issExtFilterType' is 'l3filter'."
|
||||
DEFVAL { 'FFFFFFFF'h }
|
||||
::= { issExtL3FilterEntry 8 }
|
||||
|
||||
issExtL3FilterSrcIpAddrMask OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The IP subnet mask for Source IP address.
|
||||
This object is valid only if the 'issExtFilterType' is 'l3filter'."
|
||||
DEFVAL { 'FFFFFFFF'h }
|
||||
::= { issExtL3FilterEntry 9 }
|
||||
|
||||
issExtL3FilterMinDstProtPort OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The minimum port in the destination port range. Please note
|
||||
these ports are the TCP / UDP ports."
|
||||
DEFVAL { 0 }
|
||||
::= { issExtL3FilterEntry 10 }
|
||||
|
||||
issExtL3FilterMaxDstProtPort OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum port in the destination port range. Please note
|
||||
these ports are the TCP / UDP ports."
|
||||
DEFVAL { 65535 }
|
||||
::= { issExtL3FilterEntry 11 }
|
||||
|
||||
issExtL3FilterMinSrcProtPort OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The minimum port in the source port range. Please note
|
||||
these ports are the TCP / UDP ports."
|
||||
DEFVAL { 0 }
|
||||
::= { issExtL3FilterEntry 12 }
|
||||
|
||||
issExtL3FilterMaxSrcProtPort OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum port in the source port range. Please note
|
||||
these ports are the TCP / UDP ports."
|
||||
DEFVAL { 65535 }
|
||||
::= { issExtL3FilterEntry 13 }
|
||||
|
||||
issExtL3FilterInPortList OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the complete set of ports over which if the packet arrives
|
||||
this filter rule will be applicable.
|
||||
If the incoming port list is '0', the filter rule is applicable for all the
|
||||
incoming ports.
|
||||
By default inport list is maintained as '0'."
|
||||
::= { issExtL3FilterEntry 14 }
|
||||
|
||||
issExtL3FilterOutPortList OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the complete set of ports over which if the packet goes out,
|
||||
this filter rule will be applicable.
|
||||
If the outgoing port list is '0', the filter rule is applicable for all the
|
||||
outgoing packets in all ports.
|
||||
By default outport list is maintained as '0'."
|
||||
::= { issExtL3FilterEntry 15 }
|
||||
|
||||
issExtL3FilterAckBit OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
establish(1),
|
||||
notEstablish(2),
|
||||
any(3)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The TCP ACK bit to be checked against the packet. The default
|
||||
value is 'any'(3). It means that ACK bit will not be checked
|
||||
to decide the action. "
|
||||
DEFVAL { any }
|
||||
::= { issExtL3FilterEntry 16 }
|
||||
|
||||
issExtL3FilterRstBit OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
set(1),
|
||||
notSet(2),
|
||||
any(3)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The TCP RST bit to be checked against the packet. The default
|
||||
value is 'any'(3). It means that RST bit will not be checked to
|
||||
decide the action. "
|
||||
DEFVAL { any }
|
||||
::= { issExtL3FilterEntry 17 }
|
||||
|
||||
issExtL3FilterTos OBJECT-TYPE
|
||||
SYNTAX Integer32 (-1..7)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The IP TOS bit to be checked against the packet. This is a
|
||||
single byte integer of which the last three bits (least
|
||||
significant bits) indicate Delay, Throughput and Reliability
|
||||
i.e 'uuuuudtr', u-unused, d-delay, t-throughput, r-reliability.
|
||||
For example '6' indicates low delay and high throughput.
|
||||
A value of '-1' means, the Tos Field becomes dont care"
|
||||
DEFVAL { -1 }
|
||||
::= { issExtL3FilterEntry 18 }
|
||||
|
||||
issExtL3FilterDscp OBJECT-TYPE
|
||||
SYNTAX Integer32 (-1..63)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The IP Dscp value to be checked against the packet.
|
||||
A value of '-1' means, the Dscp Field becomes dont care."
|
||||
DEFVAL { -1 }
|
||||
::= { issExtL3FilterEntry 19 }
|
||||
|
||||
issExtL3FilterDirection OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
in (1),
|
||||
out(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the direction of this filter to be applied. By Default the
|
||||
filter will be applied on ingress direction.
|
||||
When the direction of this filter is 'in', It is applied on specified
|
||||
ports of the issExtL3FilterInPortList.
|
||||
When the direction of this filter is 'out', It is applied on specified
|
||||
ports of the issExtL3FilterOutPortList."
|
||||
DEFVAL { in }
|
||||
::= { issExtL3FilterEntry 20 }
|
||||
|
||||
issExtL3FilterAction OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
allow (1),
|
||||
drop (2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the action to be taken on the packet if the filter
|
||||
rule matches.
|
||||
If the action is 'allow', the packet will be sent to the
|
||||
ports in 'out port list'. If the out port list is '0',
|
||||
the port over which the packet is to be switched will be decided
|
||||
based on further processing on the packet.
|
||||
If the action is 'drop', the packet will be discarded."
|
||||
DEFVAL { allow }
|
||||
::= { issExtL3FilterEntry 21 }
|
||||
|
||||
issExtL3FilterMatchCount OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Number of times this filter is matched."
|
||||
::= { issExtL3FilterEntry 22 }
|
||||
|
||||
issExtL3FilterStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the status of this entry. An entry is
|
||||
created in this table when this object is SET to 'createAndWait'.
|
||||
The entry in this table is used when the status of this object
|
||||
is SET 'active'. The entry in this table is not used when this
|
||||
object is SET 'notInService'. An entry created in this table is
|
||||
be deleted when this object is SET 'destroy'."
|
||||
::= { issExtL3FilterEntry 23 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user