WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity

Commit version 24.12.13800

Browse Source
This commit is contained in:
Chris Hammer
2025-01-06 17:35:06 -05:00
parent b7f6a79c2c
commit 55d9218816
6133 changed files with 4239740 additions and 1374287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

387
mibs/aricent/ARICENT-ICCH-MIB Normal file
View File

@ -0,0 +1,387 @@
-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved
-- $Id: fsicch.mib,v 1.9 2016/03/04 11:10:34 siva Exp $
-- ICCH Proprietary MIB Definition
-- This MIB explains the propreitery information implemented
-- for ICCH product.
ARICENT-ICCH-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
enterprises, Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus,
DisplayString FROM SNMPv2-TC
ZeroBasedCounter32 FROM RMON2-MIB
VlanId FROM Q-BRIDGE-MIB;
fsIcchMIB MODULE-IDENTITY
LAST-UPDATED "201412110000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION
"The proprietary MIB module for ICCH. This MIB supports Inter-Chassis
Communication Handling."
REVISION "201412110000Z"
DESCRIPTION
"The proprietary MIB module for ICCH. This MIB supports Inter-Chassis
Communication Handling. "
::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 94 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
FsIcchState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The State of the node."
SYNTAX INTEGER {
init(0), -- Node state is INIT
master(1), -- Node state is MASTER
slave(2) -- Node state is SLAVE
}
-- Groups
fsIcch OBJECT IDENTIFIER ::= { fsIcchMIB 1 }
fsIcchStatistics OBJECT IDENTIFIER ::= { fsIcchMIB 2 }
fsIcchNotification OBJECT IDENTIFIER ::= { fsIcchMIB 3 }
fsIcchTrap OBJECT IDENTIFIER ::= { fsIcchNotification 0 }
fsIcclSession OBJECT IDENTIFIER ::= { fsIcchMIB 4 }
-- Scalar objects
fsIcchTrcLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the level of trace required for ICCH.
The levels are defined as follows:
0x00000001 -- Management Trace.
0x00000002 -- Packet dump Trace.
0x00000004 -- All failure Trace.
0x00000008 -- Critical Trace.
0x00000010 -- Sync events trace
0x00000020 -- Sync message trace
0x00000040 -- Notification trace
0x0000007D -- All Trace."
DEFVAL { '00000000'H }
::= {fsIcch 1}
fsIcchStatsEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the statistics collection
of the Inter-Chassis Communication handler module.
By default, statistics collection is enabled on ICCH."
DEFVAL {enabled}
::= {fsIcch 2}
fsIcchClearStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear the statistics collection of the
Inter Chassis Communication handler module. This object has no
effect when it is set to false. By default, the statistics value
is false. When it is set to true, the statistics are cleared and
the value is set back to false. This object always returns
false when read."
DEFVAL {false}
::= {fsIcch 3}
fsIcchEnableProtoSync OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies synchronization messages that need to be
enabled in ICCL. By default, all synchronization messages are
blocked on ICCL."
DEFVAL { '00000000'H }
::= {fsIcch 4}
fsIcchFetchRemoteFdb OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to fetch remote FDB entries when MC-LAG is
enabled and FDB sync-up is enabled in the system.
This object can be used after the complete MAC table is cleared
in the local MC-LAG nodes.This object will be reset once the complete
remote FDB database is Retrieved."
DEFVAL { false }
::= {fsIcch 5}
fsIcchPeerNodeIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to specify the IP Address of Peer Node
used for ICCL TCP /IP communication .
This IP address corresponds to the Layer 3 interface that
will be created over the remote node ICCL interface."
::= {fsIcch 6}
fsIcchPeerNodeState OBJECT-TYPE
SYNTAX FsIcchState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the state of the peer Node.The state of the
node is decided after election by heart beat module. Election
is based on the fsIcchPeerNodeIpAddress and fsIcclSessionIpAddress."
::= {fsIcch 7}
-- *******************************************************************
-- ICCH session Table
-- *******************************************************************
fsIcclSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIcclSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to access the stored ICCL information"
::= { fsIcclSession 1 }
fsIcclSessionEntry OBJECT-TYPE
SYNTAX FsIcclSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the ICCL information entry of a session"
INDEX { fsIcclSessionInstanceId }
::= { fsIcclSessionTable 1 }
FsIcclSessionEntry ::=
SEQUENCE {
fsIcclSessionInstanceId Unsigned32,
fsIcclSessionInterface DisplayString,
fsIcclSessionIpAddress IpAddress,
fsIcclSessionSubnetMask IpAddress,
fsIcclSessionVlan VlanId,
fsIcclSessionNodeState FsIcchState,
fsIcclSessionRowStatus RowStatus
}
fsIcclSessionInstanceId OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies an unique value, that identifies ICCL instance."
::= {fsIcclSessionEntry 1}
fsIcclSessionInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the port to be used
for ICCH TCP/IP Communication . This value is read from iccl.conf
file. ICCH interface is a manually aggregated, high bandwidth link
to co-ordinate the control information and data exchange of
Multi-chassis LAG. Inter-Chassis Communication Handler Interface
is a trunk port. MAC learning will be disabled on this port.
However, MAC addresses learnt on the remote MC-LAG node can be
installed in the local node, with ICCL interface as the destination
port. Spanning tree will be disabled always on ICCL interface to
make sure the ICCL is always in forwarding state. When this object
is configured, the iccl.conf file is updated automatically and
the value will take effect in ISS on next reboot. This ICCL
inerface should be a port-channel interface"
DEFVAL {"po4094"}
::= {fsIcclSessionEntry 2}
fsIcclSessionIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the IP Address to be used
for ICCH TCP /IP communication .
This IP address corresponds to the Layer 3 interface that
will be created over the fsIcchInterface.
This value is read from iccl.conf file.If it is not available,
A link local IP Address 169.254.1.1 is used as the Default IP Address.
Configuring this object will result in an update to iccl.conf.
The configured value will take effect in ISS on next reboot."
DEFVAL {'A9FE0101'h}
::= {fsIcclSessionEntry 3}
fsIcclSessionSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the Subnet Mask to be
associated withIP Address to be used for ICCH TCP /IP
communication.
Configuring this object will result in an update to iccl.conf file.
The configured value will take effect in ISS on next reboot."
DEFVAL {'FF000000'h}
::= {fsIcclSessionEntry 4}
fsIcclSessionVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLAN ID to be used for ICCH
TCP /IP communication.
Configuring this object will result in an update to iccl.conf file.
The configured value will take effect in ISS on next reboot."
DEFVAL {4094}
::= {fsIcclSessionEntry 5}
fsIcclSessionNodeState OBJECT-TYPE
SYNTAX FsIcchState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the state of the node. The state of the
node is decided after election by heart beat module. Election
is based on the fsIcchIpAddress."
::= {fsIcclSessionEntry 6}
fsIcclSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the row status of ICCH session table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this
object.
The value 'CreateAndGo' adds the entry to iccl.conf and
'destroy' deletes the entry from iccl.conf."
::= { fsIcclSessionEntry 7 }
-- *******************************************************************
-- END of ICCH session Table
-- *******************************************************************
-- *******************************************************************
-- Statistics Counters
-- *******************************************************************
--
-- TX Statistics
--
fsIcchStatsSyncMsgTxCount OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of synchronization messages
successfully sent from this node."
::= {fsIcchStatistics 1}
fsIcchStatsSyncMsgTxFailedCount OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of sync-up messages failed
while sending."
::= {fsIcchStatistics 2}
--
-- RX Statistics
--
fsIcchStatsSyncMsgRxCount OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of sync-up messages
received at this node."
::= {fsIcchStatistics 3}
fsIcchStatsSyncMsgProcCount OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of sync-up messages
received and processed at this node."
::= {fsIcchStatistics 4}
fsIcchStatsSyncMsgMissedCount OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ICCH module receives and processes the synchronization
messages with the help of the sequence number in the message.
In some failure cases, when the message with a particular
sequence number is lost, this counter is incremented."
::= {fsIcchStatistics 5}
-- *******************************************************************
-- Trap Definitions
-- *******************************************************************
fsIcchTrapNodeStatusChange NOTIFICATION-TYPE
OBJECTS {
fsIcclSessionNodeState,
fsIcclSessionInstanceId,
fsIcclSessionInterface,
fsIcclSessionIpAddress,
fsIcclSessionSubnetMask,
fsIcclSessionVlan
}
STATUS current
DESCRIPTION
"This object indicates that there is a significant status change
in the Inter-chassis communication handler state.
This trap should be generated when the node status changes"
::= { fsIcchTrap 1 }
fsIcchTrapPeerNodeStatusChange NOTIFICATION-TYPE
OBJECTS {
fsIcchPeerNodeIpAddress,
fsIcchPeerNodeState
}
STATUS current
DESCRIPTION
"This object indicates that there is a significant status change
in the Peer node.This trap should be generated when peer node
status changes"
::= { fsIcchTrap 2 }
END